Path: senator-bedfellow.mit.edu!bloom-beacon.mit.edu!nycmny1-snh1.gtei.net!cpk-news-hub1.bbnplanet.com!news.gtei.net!npeer.kpnqwest.net!newssrv.ita.tip.net!news.albacom.net!newsread1.albacom.net!not-for-mail
From: gg_l_oops@hotmail.com (Gianluigi Sartori)
Newsgroups: soc.culture.italian
Subject: s.c.italian FAQ (CUSTOMS AND STANDARDS) [7/8]
Date: Sun, 16 Apr 2000 14:10:17 GMT
Lines: 206
Message-ID: <38f9c9a3.1193238@news.kataweb.it>
NNTP-Posting-Host: h213-20-133.mi2.albacom.net
X-Trace: serv1.albacom.net 955894042 18165 213.213.20.133 (16 Apr 2000 14:07:22 GMT)
X-Complaints-To: abuse@albacom.net
NNTP-Posting-Date: 16 Apr 2000 14:07:22 GMT
X-Newsreader: Forte Free Agent 1.11/32.235
Xref: senator-bedfellow.mit.edu soc.culture.italian:252972

Expires: 1 Jun 2000 07:00:00 GMT
Followup-To: soc.culture.italian
Approved: news-answers-request@MIT.Edu
Organization: Stanford University Computer Systems Laboratory
Summary: This posting contains a list of Frequently Asked
         Questions (and their answers) about Italy and
         soc.culture.italian.
Archive-name: cultures/italian/customs-standards
Posting-Frequency: Monthly
Version: 1.10

  If you want to add or change any information in this FAQ,
there are separate editors for the 8 parts. Here is a list
with the names. Sending your contribution to the right person
will speed up the process.

Introduction                Gianluigi Sartori <gg@angel.stanford.edu>
Italy and Internet          Gianluigi Sartori <gg@angel.stanford.edu>
Italians in a foreign land  Gianluigi Sartori <gg@angel.stanford.edu>
Italian radio and TV        Gianluigi Sartori <gg@angel.stanford.edu>
Academics                   Gianluigi Sartori <gg@angel.stanford.edu>
Arts and Tourism            Gianluigi Sartori <gg@angel.stanford.edu>
Customs and Standards       Gianluigi Sartori <gg@angel.stanford.edu>
Misc                        Gianluigi Sartori <gg@angel.stanford.edu>

=====S7. CUSTOMS AND STANDARDS


==Q7.1= Can I use my Italian electonic appliances in
======= USA/UK and vice versa?

Last modified: Wed May 22 21:05:17 MET 1996

Per Radio/HiFi non c'e' problema. Per gli USA puo' essere 
necessario (se il dispositivo non e' munito di cambiatensioni) 
utilizzare un trasformatore (per piccole potenze in USA lo si 
trova da Radio Shack per 16 dollari).

Piccoli/grossi elettrodomestici: per gli USA se contengono motori
e' poco probabile che funzionino in quanto la frequenza di rete 
e' diversa (USA 60 Hz, ITA 50 Hz). E' comunque poco conveniente.
TV/VCR: In USA viene impiegato il sistema televisivo NTSC mentre
in Italia e gran parte d'Europa il PAL B/G. In UK e Irlanda viene
utilizzato il PAL I. In Francia e` usato il sistema SECAM
(incompatibile col PAL e con l'NTSC). Il SECAM e` anche usato in quasi

tutta l'area d'influenza francese (leggi paesi francofoni d'Africa) e 
anche in altre regioni del mondo (ex. URSS, almeno in parte)

NTSC e PAL non sono compatibili tra di loro. Esistono in 
commercio TV e VCR che possono visualizzare sia NTSC che PAL, 
in USA si trovano nelle grosse citta' generalmente in negozi 
gestiti da Indiani (dell'India, non American Indians) i quali 
offrono anche servizi per la conversione di tapes. In USA un 
TV multi-system costa circa il doppio di un TV normale, e 
convertire un tape puo' costare circa $20-$30 per tape. Tapes
non registrati acquistati in USA possono essere utilizzati su
apparecchi europei, mentre cassette o videodischi preregistrati
non possono essere impiegati su VCR/laserdisc europei.

PAL I (UK) e PAL B/G (Ita/Eur) sono parzialmente compatibili.
Sono diversi nella fase di trasmissione/ricezione nella sezione
audio. Un TV italiano visualizzera' i programmi in UK/Eire ma
non si sentira' nulla (e viceversa). Pero' un VCR italiano
collegato via presa SCART o comunque in banda base (cioe' non 
tramite la presa d'antenna) ad un TV inglese (e viceversa) 
funziona perfettamente. Nastri acquistati in UK possono essere
utilizzati e visti in apparecchi europei.

Esistono anche convertitori tra i diversi formati (PAL-SECAM-NTSC)
e i diversi apparecchi(VCRs, TVs, camcoders).
Una interessante www page sul soggetto puo' essere recuperata
al seguente indirizzo: http://www.best.com/~jdulaney/pal.html

References: 
International Telecommunications Union "Television systems 
   used around the world", Switzerland, ISBN 92-61-02971-X
Usenet: rec.video
Also for pecific questions: bellutta@ohsu.edu

==Q7.2= Will electronic devices (phone etc) bought abroad work
======= properly in Italy?

Last modified: August 13 1993

Luigi Semenzato <luigi@paris.CS.Berkeley.EDU> writes:

POWER SUPPLIES

Most electrical appliances will need a transformer.  Italy's AC is
220V, 50Hz.  U.S. is 110V, 60Hz.  A transformer can bring 220V, 50Hz
to 110V, 50Hz.  The difference between the 50 and 60 Hz is well
tolerated by most appliances (but see below).

Some modern equipment, among which certain models of camcorders and
computers, have a `universal power supply' that will work properly
when plugged anywhere in the world.  Check the voltage and frequency
requirements on the appliance itself.

Some items will not work properly even with a transformer.  The ones I
know of are clock radios that count the AC cycles to keep the time.
They will run 20% slow in Italy (50 minutes in 1 hour).  Transformers
change the voltage, not the frequency.  [Not completely true: there
are AC-DC-AC devices that also change the frequency, but they are not
exactly consumer items, so don't look for them at Radio Shack].

Items with large electric motors of the asynchronous type (electric
fans, for instance) will run 20% slower in Italy.  (The small motors
in devices like printers or compact disk players run on internally
converted DC, so those are no problem).

For those items that can use a transformer, two types are available:
iron-core transformers, and solid-state transformers.

The iron-core type is generally safe with any appliance, but it is
much heavier than the solid-state type.  If the power of the appliance
exceeds about 200W, a iron-core transformer gets rather heavy and it
is usually better to buy it in Italy.

Solid-state transformers are cheaper and much lighter and they are
easily available for power up to 1500W.  They should be used for
resistive loads only: clothes irons, soldering irons, hair driers (the
motor has a slight inductive load, but it's sufficiently small
compared with the heating resistor), light bulbs (without a dimmer!).
A large inductive load (like a food processor) is likely to fry the
solid-state transformer.

Solid-state transformers often have a dirty voltage output and may
destroy the power supplies of computers and other electronic
equipment.

TELEPHONE, FAX, MODEM

Most telephone equipment purchased in the U.S. works properly in
Italy.
If the equipment needs to be plugged into an electrical outlet, a
110/220 transformer is needed (see the POWER SUPPLIES section above).
The following precautions must be taken:

---for telephone sets and fax machines, make sure that the set has a
tone dial/pulse dial switch (most do).  Most Italian phone lines are
still on the pulse system.  Some are on the tone system: and,
surprisingly, the U.S. tones work for them, even though many (among
which a professor of telecommunications at a famous university)
believe that the European standard is based on different tones.

---answering machines work generally fine, but retrieving messages
from another phone is not always possible, because it doesn't generate
the tones (public phones, for instance, don't).  Battery-operated
pocket tone generators with a dial pad and a speaker are available in
the U.S. and cost between $10 and $20.

---the fax and modem protocol are almost completely standardized and
everything works.  In the standard situation, however, a U.S. modem
will wait for the U.S. ready-to-dial tone before dialing, and will
never do it.  For Hayes-compatible modems (the vast majority) the
dialing command must be changed from ATDT<number> to ATXDP,,,<number>.
The DP means DIAL PULSE (use Dial Tone when possible); the X means
don't wait for the dial tone; and the commas introduce a delay, to
allow for the phone to get ready after unhooking.  Also, the modem
will not recognize the RING and BUSY signals.

---cordless phones work but may be illegal (because of frequency bands
allotments).  Nobody seems to care.  The new 900 MHz systems (they
cost more, at least $300, and claim a wider range) are almost
certainly illegal.  The digital broadband systems (still rare even in
the U.S.) were illegal in 1991, as Italian regulation did not allow
any kind of broadband communication.  Cellular phone sets are useless,
since the local telephone company (SIP) appears to have a monopoly on
cellular communication.

STEREO, RADIO, TV, VCR, CAMCORDERS, 

All stereo equipment works fine with a transformer, with one small
exception: the FM radio band in Italy starts at a slightly lower
frequency than the U.S. lower bound of 88 MHz, and a few stations are
unreachable.

The U.S. TV standard (NTSC) and the Italian one (PAL) are not
compatible.  Among various differences, NTSC transmits 30
frames/second, PAL 25 frames/second.  Many electronic stores,
especially those in large cities and the mail-order stores, carry PAL
and multi-system equipment (both PAL and NTSC in various flavors, and
often SECAM too).

Pre-recorded video tapes bought in the U.S. cannot be played on
Italian VCRs (blank tapes are OK), unless both VCR and TV set are of
the multi-system type.  There is also a still rare and relatively
expensive type of VCR that is capable of reading a NTSC tape and
outputting a PAL signal (the conversion is hard, because of the
different number of frames).  Do not confuse this with a cheaper type
that performs a `fake' NTSC-PAL conversion: it outputs a PAL signal at
30 frames/second.  Some PAL TV sets can handle that, usually with a
certain amount of picture distortion (shorter and wider); other can't.

There are also converters for the different standards (PAL-SECAM-NTSC)
and devices (VCRs, TVs, camcoders).
An useful www page about this topic is in :
http://www.best.com/~jdulaney/pal.html

VIDEO GAMES

A video-game unit bought in the U.S. outputs a NTSC signal and will
work only with a NTSC

