----------------------------------------------------------------------------- MANIFEST | 278 Makefile | 40 aclocal.m4 | 118 config.guess | 17 config.sub | 28 configure | 5675 ++++++++------ configure.in | 164 doc/CHANGES | 141 doc/CHANGES.old | 2 doc/CREDITS | 131 doc/INSTALL | 60 doc/TODO | 250 doc/WHATSNEW | 34 doc/config-anomalies | 5 doc/keymap.sample | 5 doc/l10n/de.add | 6 doc/l10n/de.po |15164 -------------------------------------- doc/l10n/de/tin.1 | 4120 ---------- doc/l10n/de/tin.5 | 2785 ------- doc/l10n/en_GB.po |16095 ---------------------------------------- doc/l10n/en_GB/tin.1 | 3980 ---------- doc/l10n/en_GB/tin.5 | 2705 ------ doc/l10n/es.po |13702 ---------------------------------- doc/l10n/es/tin.1 | 3980 ---------- doc/l10n/es/tin.5 | 2705 ------ doc/l10n/tin-man.pot |13463 ---------------------------------- doc/opt-case.1 | 4 doc/tin.1 | 833 +- doc/tin.5 | 766 + doc/tin.defaults | 2 doc/tinews.1 | 4 doc/url_handler.1 | 4 include/autoconf.hin | 49 include/bool.h | 2 include/bugrep.h | 2 include/debug.h | 4 include/extern.h | 292 include/keymap.h | 18 include/missing_fd.h | 2 include/newsrc.h | 2 include/nntplib.h | 11 include/policy.h | 11 include/proto.h | 102 include/rfc2046.h | 35 include/stpwatch.h | 2 include/tcurses.h | 2 include/tin.h | 440 - include/tinrc.h | 54 include/tnntp.h | 2 include/tnntps.h | 2 include/trace.h | 2 include/version.h | 16 po-man/de.add | 6 po-man/de.po |17325 ++++++++++++++++++++++++++++++++++++++++++++ po-man/de/tin.1 | 4430 +++++++++++ po-man/de/tin.5 | 2991 +++++++ po-man/en_GB.po |17076 +++++++++++++++++++++++++++++++++++++++++++ po-man/en_GB/tin.1 | 4141 ++++++++++ po-man/en_GB/tin.5 | 2816 +++++++ po-man/es.po |14592 +++++++++++++++++++++++++++++++++++++ po-man/es/tin.1 | 4140 ++++++++++ po-man/es/tin.5 | 2816 +++++++ po-man/ro.po |18493 +++++++++++++++++++++++++++++++++++++++++++++++ po-man/ro/tin.1 | 4396 +++++++++++ po-man/ro/tin.5 | 2969 +++++++ po-man/tin-man.pot |14325 ++++++++++++++++++++++++++++++++++++ po/Makefile.inn | 3 po/da.po | 4949 +++++++----- po/de.po | 4983 +++++++----- po/en_GB.po | 4794 ++++++------ po/es.po | 4841 +++++++----- po/et.po | 5472 ++++++++----- po/fr.po | 5028 +++++++----- po/ro.po | 9098 +++++++++++++++++++++++ po/ru.po | 5053 +++++++----- po/sv.po | 4726 ++++++------ po/tin.pot | 4550 ++++++----- po/tr.po | 4973 +++++++----- po/zh_CN.po | 4824 +++++++----- po/zh_TW.po | 4824 +++++++----- po4a.conf | 11 src/Makefile.in | 70 src/active.c | 313 src/art.c | 970 +- src/attrib.c | 237 src/auth.c | 181 src/charset.c | 241 src/color.c | 35 src/config.c | 1591 ++-- src/cook.c | 1411 ++- src/crc32.c | 149 src/curses.c | 14 src/debug.c | 41 src/envarg.c | 4 src/feed.c | 75 src/filter.c | 381 src/getline.c | 12 src/global.c | 12 src/group.c | 234 src/hashstr.c | 12 src/header.c | 70 src/help.c | 371 src/inews.c | 12 src/init.c | 225 src/joinpath.c | 2 src/keymap.c | 102 src/lang.c | 659 + src/langinfo.c | 129 src/list.c | 7 src/lock.c | 6 src/mail.c | 138 src/main.c | 282 src/makecfg.c | 98 src/memory.c | 80 src/mimetypes.c | 2 src/misc.c | 715 + src/my_tmpfile.c | 14 src/newsrc.c | 192 src/nntplib.c | 1210 ++- src/nntps.c | 209 src/nrctbl.c | 29 src/options_menu.c | 554 + src/page.c | 751 - src/parsdate.y | 15 src/pgp.c | 46 src/post.c | 617 - src/prompt.c | 275 src/read.c | 27 src/refs.c | 18 src/regex.c | 74 src/rfc1524.c | 17 src/rfc2045.c | 55 src/rfc2046.c | 35 src/rfc2047.c | 128 src/save.c | 97 src/screen.c | 48 src/search.c | 37 src/select.c | 738 + src/sigfile.c | 23 src/signal.c | 29 src/strftime.c | 340 src/string.c | 151 src/tags.c | 18 src/tcurses.c | 12 src/thread.c | 104 src/tincfg.tbl | 37 src/trace.c | 2 src/version.c | 2 src/xface.c | 19 src/xref.c | 15 tin-2.6.5/po/da.gmo |binary tin-2.6.5/po/de.gmo |binary tin-2.6.5/po/en_GB.gmo |binary tin-2.6.5/po/es.gmo |binary tin-2.6.5/po/et.gmo |binary tin-2.6.5/po/fr.gmo |binary tin-2.6.5/po/ro.gmo |binary tin-2.6.5/po/ru.gmo |binary tin-2.6.5/po/sv.gmo |binary tin-2.6.5/po/tr.gmo |binary tin-2.6.5/po/zh_CN.gmo |binary tin-2.6.5/po/zh_TW.gmo |binary tin.spec | 2 tools/metamutt | 10 tools/opt-case.pl | 15 tools/tinews.pl | 13 tools/url_handler.pl | 29 tools/w2r.pl | 58 168 files changed, 169428 insertions(+), 112479 deletions(-) ----------------------------------------------------------------------------- diff -Nurp '--exclude=.bzr*' tin-2.6.4/MANIFEST tin-2.6.5/MANIFEST --- tin-2.6.4/MANIFEST 2024-12-24 00:19:13.000000000 +0100 +++ tin-2.6.5/MANIFEST 2025-12-24 00:14:33.546379798 +0100 @@ -1,50 +1,50 @@ -MANIFEST for tin-2.6.4 (Tue Dec 24 00:19:12 CET 2024) +MANIFEST for tin-2.6.5 (Wed Dec 24 00:14:33 CET 2025) ---------------------------------------------------- - 13889 ./Makefile - 7883 ./MANIFEST + 14121 ./Makefile + 8003 ./MANIFEST 1574 ./README 733 ./README.MAC 976 ./README.WIN - 215234 ./aclocal.m4 + 216735 ./aclocal.m4 1166 ./conf-tin - 50743 ./config.guess - 39713 ./config.sub - 1067017 ./configure - 56335 ./configure.in + 50850 ./config.guess + 39943 ./config.sub + 1083782 ./configure + 58021 ./configure.in 7123 ./install-sh - 356 ./po4a.conf + 385 ./po4a.conf 1788 ./tin.spec - 22225 ./doc/CHANGES - 319061 ./doc/CHANGES.old - 5248 ./doc/CREDITS + 29703 ./doc/CHANGES + 319062 ./doc/CHANGES.old + 5753 ./doc/CREDITS 1305 ./doc/DEBUG_REFS - 35269 ./doc/INSTALL - 47301 ./doc/TODO - 3174 ./doc/WHATSNEW + 35489 ./doc/INSTALL + 49404 ./doc/TODO + 4756 ./doc/WHATSNEW 2618 ./doc/art_handling.txt 1701 ./doc/article.txt 3509 ./doc/auth.txt - 3759 ./doc/config-anomalies + 3717 ./doc/config-anomalies 12253 ./doc/filtering 35305 ./doc/good-netkeeping-seal 3790 ./doc/internals.txt 23720 ./doc/iso2asc.txt - 4039 ./doc/keymap.sample + 4112 ./doc/keymap.sample 774 ./doc/mailcap.sample 5922 ./doc/mbox.5 3365 ./doc/mime.types 4223 ./doc/mmdf.5 2128 ./doc/newsoverview.5 1541 ./doc/nov_tests - 5156 ./doc/opt-case.1 + 5154 ./doc/opt-case.1 3964 ./doc/pgp.txt 3048 ./doc/rcvars.txt 1525 ./doc/reading-mail.txt 4914 ./doc/umlaute.txt 4580 ./doc/umlauts.txt - 7117 ./doc/url_handler.1 - 152967 ./doc/tin.1 - 89914 ./doc/tin.5 + 7131 ./doc/url_handler.1 + 161400 ./doc/tin.1 + 94798 ./doc/tin.5 5069 ./doc/tin.defaults 19729 ./doc/tinews.1 2469 ./doc/tools.txt @@ -52,102 +52,103 @@ MANIFEST for tin-2.6.4 (Tue Dec 24 00:19 2196 ./doc/wildmat.3 348 ./tools/expiretover 2282 ./tools/flnews2tin.pl - 3816 ./tools/metamutt - 2815 ./tools/opt-case.pl + 3813 ./tools/metamutt + 2860 ./tools/opt-case.pl 1453 ./tools/tinlock - 50929 ./tools/tinews.pl - 3854 ./tools/url_handler.pl + 51009 ./tools/tinews.pl + 3708 ./tools/url_handler.pl 1697 ./tools/url_handler.sh - 3377 ./tools/w2r.pl + 4715 ./tools/w2r.pl 2697 ./include/bool.h 1886 ./include/bugrep.h - 2449 ./include/debug.h - 85568 ./include/extern.h - 14459 ./include/keymap.h + 2448 ./include/debug.h + 89761 ./include/extern.h + 14559 ./include/keymap.h 2992 ./include/missing_fd.h 6490 ./include/newsrc.h - 9447 ./include/nntplib.h - 26119 ./include/policy.h - 36837 ./include/proto.h - 7895 ./include/rfc2046.h + 9734 ./include/nntplib.h + 26026 ./include/policy.h + 37456 ./include/proto.h + 8202 ./include/rfc2046.h 1537 ./include/snprintf.h 2675 ./include/stpwatch.h 6205 ./include/tcurses.h - 79887 ./include/tin.h - 18766 ./include/tinrc.h + 86900 ./include/tin.h + 19967 ./include/tinrc.h 4045 ./include/tnntp.h 3179 ./include/tnntps.h 2367 ./include/trace.h - 2247 ./include/version.h - 37904 ./src/active.c - 97547 ./src/art.c - 85310 ./src/attrib.c - 24755 ./src/auth.c - 16265 ./src/charset.c - 8886 ./src/color.c - 73524 ./src/config.c - 45001 ./src/cook.c - 26564 ./src/curses.c - 12881 ./src/debug.c + 2245 ./include/version.h + 38285 ./src/active.c + 97903 ./src/art.c + 90037 ./src/attrib.c + 25374 ./src/auth.c + 17230 ./src/charset.c + 8775 ./src/color.c + 86467 ./src/config.c + 72680 ./src/cook.c + 6474 ./src/crc32.c + 26680 ./src/curses.c + 12340 ./src/debug.c 3519 ./src/envarg.c - 30876 ./src/feed.c - 61248 ./src/filter.c - 18128 ./src/getline.c - 9186 ./src/global.c - 50898 ./src/group.c - 3910 ./src/hashstr.c - 8605 ./src/header.c + 31545 ./src/feed.c + 62440 ./src/filter.c + 18203 ./src/getline.c + 9356 ./src/global.c + 55565 ./src/group.c + 3939 ./src/hashstr.c + 9270 ./src/header.c 6394 ./src/heapsort.c - 45983 ./src/help.c - 14283 ./src/inews.c - 44301 ./src/init.c + 47498 ./src/help.c + 14310 ./src/inews.c + 46899 ./src/init.c 2537 ./src/joinpath.c - 116646 ./src/keymap.c - 170780 ./src/lang.c - 4517 ./src/langinfo.c - 7316 ./src/list.c - 6866 ./src/lock.c - 19204 ./src/mail.c - 43508 ./src/main.c - 12419 ./src/makecfg.c - 17662 ./src/memory.c + 119346 ./src/keymap.c + 184343 ./src/lang.c + 4990 ./src/langinfo.c + 7296 ./src/list.c + 6905 ./src/lock.c + 18316 ./src/mail.c + 46910 ./src/main.c + 12525 ./src/makecfg.c + 19188 ./src/memory.c 5496 ./src/mimetypes.c - 123293 ./src/misc.c - 44701 ./src/newsrc.c - 76030 ./src/nntplib.c - 30297 ./src/nntps.c - 9176 ./src/nrctbl.c - 118662 ./src/options_menu.c - 79007 ./src/page.c - 24964 ./src/parsdate.y - 13954 ./src/pgp.c - 178101 ./src/post.c - 20971 ./src/prompt.c - 10703 ./src/read.c - 28871 ./src/refs.c - 9059 ./src/regex.c - 14587 ./src/rfc1524.c - 15438 ./src/rfc2045.c - 53866 ./src/rfc2046.c - 39173 ./src/rfc2047.c - 59735 ./src/save.c - 18176 ./src/screen.c - 19606 ./src/search.c - 45965 ./src/select.c - 8727 ./src/sigfile.c - 15201 ./src/signal.c + 127926 ./src/misc.c + 48194 ./src/newsrc.c + 90183 ./src/nntplib.c + 34141 ./src/nntps.c + 9494 ./src/nrctbl.c + 127250 ./src/options_menu.c + 77479 ./src/page.c + 24891 ./src/parsdate.y + 14182 ./src/pgp.c + 182456 ./src/post.c + 25684 ./src/prompt.c + 10868 ./src/read.c + 28598 ./src/refs.c + 10572 ./src/regex.c + 14670 ./src/rfc1524.c + 15436 ./src/rfc2045.c + 54467 ./src/rfc2046.c + 39996 ./src/rfc2047.c + 60884 ./src/save.c + 17926 ./src/screen.c + 20007 ./src/search.c + 61780 ./src/select.c + 9036 ./src/sigfile.c + 15675 ./src/signal.c 42445 ./src/snprintf.c - 8283 ./src/strftime.c - 45269 ./src/string.c - 9921 ./src/tags.c - 18100 ./src/tcurses.c - 6079 ./src/my_tmpfile.c - 48191 ./src/thread.c + 8362 ./src/strftime.c + 47289 ./src/string.c + 9927 ./src/tags.c + 18076 ./src/tcurses.c + 6139 ./src/my_tmpfile.c + 48822 ./src/thread.c 2581 ./src/trace.c 5674 ./src/version.c 5558 ./src/wildmat.c - 7167 ./src/xface.c - 13256 ./src/xref.c + 7271 ./src/xface.c + 13343 ./src/xref.c 422 ./pcre/AUTHORS 2515 ./pcre/COPYING 118928 ./pcre/ChangeLog @@ -215,9 +216,9 @@ MANIFEST for tin-2.6.4 (Tue Dec 24 00:19 108966 ./pcre/testdata/testoutput7 53056 ./pcre/testdata/testoutput8 28769 ./pcre/testdata/testoutput9 - 20074 ./include/autoconf.hin - 22392 ./src/Makefile.in - 10953 ./src/tincfg.tbl + 20041 ./include/autoconf.hin + 24530 ./src/Makefile.in + 11701 ./src/tincfg.tbl 1439 ./libcanlock/COPYING 4149 ./libcanlock/ChangeLog 490 ./libcanlock/ChangeLog_V0 @@ -247,40 +248,45 @@ MANIFEST for tin-2.6.4 (Tue Dec 24 00:19 10574 ./libcanlock/test/hkdf.c 64019 ./libcanlock/test/shatest.c 14702 ./libcanlock/util/canlock.c - 5096 ./po/Makefile.inn + 5136 ./po/Makefile.inn 556 ./po/POTFILES.in - 158772 ./po/tin.pot - 162805 ./po/da.gmo - 248149 ./po/da.po - 218706 ./po/de.gmo - 260918 ./po/de.po - 204195 ./po/en_GB.gmo - 245299 ./po/en_GB.po - 1614 ./po/es.gmo - 186686 ./po/es.po - 188086 ./po/et.gmo - 247482 ./po/et.po - 210914 ./po/fr.gmo - 259896 ./po/fr.po - 145164 ./po/ru.gmo - 270431 ./po/ru.po - 21281 ./po/sv.gmo - 171811 ./po/sv.po - 183391 ./po/tr.gmo - 262366 ./po/tr.po - 247343 ./po/zh_CN.po - 167154 ./po/zh_CN.gmo - 246894 ./po/zh_TW.po - 167287 ./po/zh_TW.gmo - 169636 ./doc/l10n/de/tin.1 - 99169 ./doc/l10n/de/tin.5 - 230 ./doc/l10n/de.add - 459259 ./doc/l10n/de.po - 157184 ./doc/l10n/en_GB/tin.1 - 92673 ./doc/l10n/en_GB/tin.5 - 522799 ./doc/l10n/en_GB.po - 157262 ./doc/l10n/es/tin.1 - 92682 ./doc/l10n/es/tin.5 - 349728 ./doc/l10n/es.po - 326428 ./doc/l10n/tin-man.pot -14265953 total + 174052 ./po/tin.pot + 155148 ./po/da.gmo + 272684 ./po/da.po + 237264 ./po/de.gmo + 285597 ./po/de.po + 221290 ./po/en_GB.gmo + 268442 ./po/en_GB.po + 2271 ./po/es.gmo + 205118 ./po/es.po + 194228 ./po/et.gmo + 274506 ./po/et.po + 197334 ./po/fr.gmo + 286343 ./po/fr.po + 22037 ./po/ro.gmo + 192444 ./po/ro.po + 137626 ./po/ru.gmo + 300185 ./po/ru.po + 20036 ./po/sv.gmo + 190549 ./po/sv.po + 174259 ./po/tr.gmo + 287064 ./po/tr.po + 268127 ./po/zh_CN.po + 158839 ./po/zh_CN.gmo + 267686 ./po/zh_TW.po + 158969 ./po/zh_TW.gmo + 188726 ./po-man/de/tin.1 + 111068 ./po-man/de/tin.5 + 241 ./po-man/de.add + 569137 ./po-man/de.po + 165780 ./po-man/en_GB/tin.1 + 97747 ./po-man/en_GB/tin.5 + 550225 ./po-man/en_GB.po + 165853 ./po-man/es/tin.1 + 97771 ./po-man/es/tin.5 + 369976 ./po-man/es.po + 191967 ./po-man/ro/tin.1 + 111628 ./po-man/ro/tin.5 + 636696 ./po-man/ro.po + 345207 ./po-man/tin-man.pot +16132740 total diff -Nurp '--exclude=.bzr*' tin-2.6.4/Makefile tin-2.6.5/Makefile --- tin-2.6.4/Makefile 2024-12-24 00:18:40.000000000 +0100 +++ tin-2.6.5/Makefile 2025-12-24 00:14:31.830305890 +0100 @@ -1,7 +1,7 @@ # Top level Makefile for tin # - for configuration options read the doc/INSTALL file. # -# Updated: 2024-04-02 +# Updated: 2025-04-25 # SHELL = @SHELL@ @@ -9,9 +9,9 @@ SHELL = @SHELL@ PROJECT = tin LVER = 2 PVER = 6 -SVER = 4 +SVER = 5 VER = $(LVER).$(PVER).$(SVER) -DVER = 20241224 +DVER = 20251224 EXE = tin # directory structure @@ -24,7 +24,7 @@ PCREDIR = ./pcre CANDIR = ./libcanlock TOLDIR = ./tools PODIR = ./po -L10NDIR = ./doc/l10n +POMANDIR = ./po-man HFILES = \ $(INCDIR)/bool.h \ @@ -57,6 +57,7 @@ CFILES = \ $(SRCDIR)/color.c \ $(SRCDIR)/config.c \ $(SRCDIR)/cook.c \ + $(SRCDIR)/crc32.c \ $(SRCDIR)/curses.c \ $(SRCDIR)/debug.c\ $(SRCDIR)/envarg.c \ @@ -305,6 +306,8 @@ POFILES = \ $(PODIR)/et.po \ $(PODIR)/fr.gmo \ $(PODIR)/fr.po \ + $(PODIR)/ro.gmo \ + $(PODIR)/ro.po \ $(PODIR)/ru.gmo \ $(PODIR)/ru.po \ $(PODIR)/sv.gmo \ @@ -317,21 +320,24 @@ POFILES = \ $(PODIR)/zh_TW.gmo L10NFILES = \ - $(L10NDIR)/de/tin.1 \ - $(L10NDIR)/de/tin.5 \ - $(L10NDIR)/de.add \ - $(L10NDIR)/de.po \ - $(L10NDIR)/en_GB/tin.1 \ - $(L10NDIR)/en_GB/tin.5 \ - $(L10NDIR)/en_GB.po \ - $(L10NDIR)/es/tin.1 \ - $(L10NDIR)/es/tin.5 \ - $(L10NDIR)/es.po \ - $(L10NDIR)/tin-man.pot + $(POMANDIR)/de/tin.1 \ + $(POMANDIR)/de/tin.5 \ + $(POMANDIR)/de.add \ + $(POMANDIR)/de.po \ + $(POMANDIR)/en_GB/tin.1 \ + $(POMANDIR)/en_GB/tin.5 \ + $(POMANDIR)/en_GB.po \ + $(POMANDIR)/es/tin.1 \ + $(POMANDIR)/es/tin.5 \ + $(POMANDIR)/es.po \ + $(POMANDIR)/ro/tin.1 \ + $(POMANDIR)/ro/tin.5 \ + $(POMANDIR)/ro.po \ + $(POMANDIR)/tin-man.pot ALL_FILES = $(TOP) $(DOC) $(TOL) $(HFILES) $(CFILES) $(PCRE) $(MISC) $(CAN) $(POFILES) $(L10NFILES) -ALL_DIRS = $(TOPDIR) $(DOCDIR) $(SRCDIR) $(INCDIR) $(PCREDIR) $(PCREDIR)/doc $(PCREDIR)/testdata $(CANDIR) $(CANDIR)/include $(CANDIR)/src $(CANDIR)/test $(CANDIR)/util/ $(PODIR) $(L10NDIR) $(L10NDIR)/de $(L10NDIR)/en_GB +ALL_DIRS = $(TOPDIR) $(DOCDIR) $(SRCDIR) $(INCDIR) $(PCREDIR) $(PCREDIR)/doc $(PCREDIR)/testdata $(CANDIR) $(CANDIR)/include $(CANDIR)/src $(CANDIR)/test $(CANDIR)/util/ $(PODIR) $(POMANDIR) $(POMANDIR)/de $(POMANDIR)/en_GB $(POMANDIR)/es $(POMANDIR)/ro # standard commands CD = cd @@ -523,7 +529,7 @@ distclean: $(PODIR)/messages.mo configure: configure.in aclocal.m4 - autoconf + @command -v autoconf-dickey 1>/dev/null && autoconf-dickey || autoconf config.status: configure $(SHELL) $(TOPDIR)/config.status --recheck diff -Nurp '--exclude=.bzr*' tin-2.6.4/aclocal.m4 tin-2.6.5/aclocal.m4 --- tin-2.6.4/aclocal.m4 2024-12-05 16:18:01.000000000 +0100 +++ tin-2.6.5/aclocal.m4 2025-11-13 02:28:10.313533435 +0100 @@ -2,10 +2,10 @@ dnl Project : tin - a Usenet reader dnl Module : aclocal.m4 dnl Author : Thomas E. Dickey dnl Created : 1995-08-24 -dnl Updated : 2024-12-02 +dnl Updated : 2025-10-30 dnl Notes : dnl -dnl Copyright (c) 1995-2024 Thomas E. Dickey +dnl Copyright (c) 1995-2026 Thomas E. Dickey dnl All rights reserved. dnl dnl Redistribution and use in source and binary forms, with or without @@ -866,17 +866,51 @@ done ifelse($2,,LIBS,[$2])="$cf_add_libs" ])dnl dnl --------------------------------------------------------------------------- -dnl CF_ADD_LIB_AFTER version: 3 updated: 2013/07/09 21:27:22 +dnl CF_ADD_LIB_AFTER version: 4 updated: 2025/06/14 06:46:23 dnl ---------------- dnl Add a given library after another, e.g., following the one it satisfies a dnl dependency for. dnl dnl $1 = the first library dnl $2 = its dependency +dnl $3 = variable to update (default $LIBS) AC_DEFUN([CF_ADD_LIB_AFTER],[ -CF_VERBOSE(...before $LIBS) -LIBS=`echo "$LIBS" | sed -e "s/[[ ]][[ ]]*/ /g" -e "s%$1 %$1 $2 %" -e 's% % %g'` -CF_VERBOSE(...after $LIBS) +cf_add_libs="[$]ifelse($3,,LIBS,[$3])" +CF_VERBOSE(...before $cf_add_libs) +for cf_add_1lib in $2; do + # filter duplicates + cf_found_2lib=no + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_found_2lib=yes + break + fi + done + # if not a duplicate, find the dependent library + if test "$cf_found_2lib" = no + then + cf_found_2lib=no + cf_add_2libs= + for cf_add_2lib in $cf_add_libs + do + test -n "$cf_add_2libs" && cf_add_2libs="$cf_add_2libs " + cf_add_2libs="$cf_add_2libs$cf_add_2lib" + if test "x$cf_add_2lib" = "x$1" + then + cf_found_2lib=yes + cf_add_2libs="$cf_add_2libs $cf_add_1lib" + fi + done + if test "$cf_found_2lib" = yes + then + cf_add_libs="$cf_add_2libs" + else + CF_VERBOSE(...missed $1) + fi + fi +done +CF_VERBOSE(...after $cf_add_libs) +ifelse($3,,LIBS,[$3])="$cf_add_libs" ])dnl dnl --------------------------------------------------------------------------- dnl CF_ADD_OPTIONAL_PATH version: 6 updated: 2024/09/10 19:19:44 @@ -1064,7 +1098,7 @@ dnl Allow user to enable a normally-off AC_DEFUN([CF_ARG_ENABLE], [CF_ARG_OPTION($1,[$2],[$3],[$4],no)])dnl dnl --------------------------------------------------------------------------- -dnl CF_ARG_OPTION version: 5 updated: 2015/05/10 19:52:14 +dnl CF_ARG_OPTION version: 6 updated: 2025/08/05 04:09:09 dnl ------------- dnl Restricted form of AC_ARG_ENABLE that ensures user doesn't give bogus dnl values. @@ -1073,7 +1107,7 @@ dnl Parameters: dnl $1 = option name dnl $2 = help-string dnl $3 = action to perform if option is not default -dnl $4 = action if perform if option is default +dnl $4 = action to perform if option is default dnl $5 = default option value (either 'yes' or 'no') AC_DEFUN([CF_ARG_OPTION], [AC_ARG_ENABLE([$1],[$2],[test "$enableval" != ifelse([$5],no,yes,no) && enableval=ifelse([$5],no,no,yes) @@ -1184,7 +1218,7 @@ fi AC_SUBST(ARFLAGS) ]) dnl --------------------------------------------------------------------------- -dnl CF_BUILD_CC version: 13 updated: 2024/06/22 13:42:22 +dnl CF_BUILD_CC version: 14 updated: 2024/12/14 11:58:01 dnl ----------- dnl If we're cross-compiling, allow the user to override the tools and their dnl options. The configure script is oriented toward identifying the host @@ -1262,7 +1296,7 @@ if test "$cross_compiling" = yes ; then AC_TRY_RUN([#include int main(int argc, char *argv[]) { - ${cf_cv_main_return:-return}(argc < 0 || argv == 0 || argv[0] == 0); + ${cf_cv_main_return:-return}(argc < 0 || argv == (void*)0 || argv[0] == (void*)0); } ], cf_ok_build_cc=yes, @@ -3370,7 +3404,7 @@ CF_INTEL_COMPILER(GCC,INTEL_COMPILER,CFL CF_CLANG_COMPILER(GCC,CLANG_COMPILER,CFLAGS) ])dnl dnl --------------------------------------------------------------------------- -dnl CF_GCC_WARNINGS version: 41 updated: 2021/01/01 16:53:59 +dnl CF_GCC_WARNINGS version: 43 updated: 2024/12/21 08:44:12 dnl --------------- dnl Check if the compiler supports useful warning options. There's a few that dnl we don't use, simply because they're too noisy: @@ -3833,16 +3867,18 @@ done ]) ])dnl dnl --------------------------------------------------------------------------- -dnl CF_MAKEFLAGS version: 21 updated: 2021/09/04 06:47:34 +dnl CF_MAKEFLAGS version: 22 updated: 2025/07/05 16:17:37 dnl ------------ dnl Some 'make' programs support ${MAKEFLAGS}, some ${MFLAGS}, to pass 'make' dnl options to lower-levels. It is very useful for "make -n" -- if we have it. -dnl (GNU 'make' does both, something POSIX 'make', which happens to make the -dnl ${MAKEFLAGS} variable incompatible because it adds the assignments :-) +dnl POSIX accommodates both by pretending they are the same variable, adding +dnl the behavior of the latter to the former. AC_DEFUN([CF_MAKEFLAGS], [AC_REQUIRE([AC_PROG_FGREP])dnl AC_CACHE_CHECK(for makeflags variable, cf_cv_makeflags,[ + cf_save_makeflags="$MAKEFLAGS"; unset MAKEFLAGS + cf_save_mflags="$MFLAGS"; unset MFLAGS cf_cv_makeflags='' for cf_option in '-${MAKEFLAGS}' '${MFLAGS}' do @@ -3870,6 +3906,8 @@ CF_EOF ;; esac done + test -n "$cf_save_makeflags" && MAKEFLAGS="$cf_save_makeflags" + test -n "$cf_save_mflags" && MFLAGS="$cf_save_mflags" rm -f cf_makeflags.tmp ]) @@ -3946,7 +3984,7 @@ printf("old\\n"); ,[$1=no]) ])dnl dnl --------------------------------------------------------------------------- -dnl CF_NCURSES_CONFIG version: 28 updated: 2021/08/28 15:20:37 +dnl CF_NCURSES_CONFIG version: 29 updated: 2025/01/10 19:55:54 dnl ----------------- dnl Tie together the configure-script macros for ncurses, preferring these in dnl order: @@ -4007,6 +4045,7 @@ if test "x${PKG_CONFIG:=none}" != xnone; ;; esac + CF_REQUIRE_PKG($cf_ncuconfig_root) CF_APPEND_CFLAGS($cf_pkg_cflags) CF_ADD_LIBS($cf_pkg_libs) @@ -5125,6 +5164,30 @@ CFLAGS="$cf_save_CFLAGS_$1" CPPFLAGS="$cf_save_CPPFLAGS_$1" ])dnl dnl --------------------------------------------------------------------------- +dnl CF_REQUIRE_PKG version: 1 updated: 2025/01/10 19:55:54 +dnl -------------- +dnl Update $REQUIRE_PKG, which lists the known required packages for this +dnl program. +dnl +dnl $1 = package(s) to require, e.g., in the generated ".pc" file +define([CF_REQUIRE_PKG], +[ +for cf_required in $1 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done +AC_SUBST(REQUIRE_PKG) +])dnl +dnl --------------------------------------------------------------------------- dnl CF_SAVE_XTRA_FLAGS version: 1 updated: 2020/01/11 16:46:44 dnl ------------------ dnl Use this macro to save CFLAGS/CPPFLAGS/LIBS before checks against X headers @@ -5456,13 +5519,13 @@ AC_DEFUN([CF_STRERROR],[ AC_CHECK_FUNCS(strerror, AC_DEFINE(HAVE_STRERROR),[CF_SYS_ERRLIST]) ])dnl dnl --------------------------------------------------------------------------- -dnl CF_STRUCT_TERMIOS version: 13 updated: 2023/12/03 19:38:54 +dnl CF_STRUCT_TERMIOS version: 14 updated: 2025/07/19 12:19:51 dnl ----------------- dnl Some machines require _POSIX_SOURCE to completely define struct termios. AC_DEFUN([CF_STRUCT_TERMIOS],[ AC_REQUIRE([CF_XOPEN_SOURCE]) -AC_CHECK_HEADERS( \ +AC_CHECK_HEADERS( sgtty.h \ termio.h \ termios.h \ unistd.h \ @@ -5809,7 +5872,7 @@ AC_DEFUN([CF_TRIM_X_LIBS],[ done ]) dnl --------------------------------------------------------------------------- -dnl CF_TRY_PKG_CONFIG version: 6 updated: 2020/12/31 10:54:15 +dnl CF_TRY_PKG_CONFIG version: 7 updated: 2025/01/10 19:55:54 dnl ----------------- dnl This is a simple wrapper to use for pkg-config, for libraries which may be dnl available in that form. @@ -5826,6 +5889,7 @@ if test "$PKG_CONFIG" != none && "$PKG_C cf_pkgconfig_libs="`$PKG_CONFIG --libs "$1" 2>/dev/null`" CF_VERBOSE(package $1 CFLAGS: $cf_pkgconfig_incs) CF_VERBOSE(package $1 LIBS: $cf_pkgconfig_libs) + CF_REQUIRE_PKG($1) CF_ADD_CFLAGS($cf_pkgconfig_incs) CF_ADD_LIBS($cf_pkgconfig_libs) ifelse([$2],,:,[$2]) @@ -6411,7 +6475,7 @@ esac ])dnl dnl --------------------------------------------------------------------------- -dnl CF_XOPEN_SOURCE version: 68 updated: 2024/11/09 18:07:29 +dnl CF_XOPEN_SOURCE version: 70 updated: 2025/10/21 16:27:38 dnl --------------- dnl Try to get _XOPEN_SOURCE defined properly that we can use POSIX functions, dnl or adapt to the vendor's definitions to get equivalent functionality, @@ -6471,7 +6535,7 @@ irix[[56]].*) cf_xopen_source="-D_SGI_SOURCE" cf_XOPEN_SOURCE= ;; -linux*gnu|linux*gnuabi64|linux*gnuabin32|linux*gnueabi|linux*gnueabihf|linux*gnux32|uclinux*|gnu*|mint*|k*bsd*-gnu|cygwin|msys|mingw*|linux*uclibc) +linux*gnu*|uclinux*|gnu*|mint*|k*bsd*-gnu|cygwin|msys|mingw*|linux*uclibc) CF_GNU_SOURCE($cf_XOPEN_SOURCE) ;; linux*musl) @@ -6570,7 +6634,7 @@ fi fi # cf_cv_posix_visible ]) dnl --------------------------------------------------------------------------- -dnl CF_X_ATHENA version: 25 updated: 2023/01/11 04:05:23 +dnl CF_X_ATHENA version: 26 updated: 2025/06/14 06:46:23 dnl ----------- dnl Check for Xaw (Athena) libraries dnl @@ -6640,8 +6704,6 @@ if test "$PKG_CONFIG" != none ; then CF_UPPER(cf_x_athena_LIBS,HAVE_LIB_$cf_x_athena) AC_DEFINE_UNQUOTED($cf_x_athena_LIBS) - CF_TRIM_X_LIBS - AC_CACHE_CHECK(for usable $cf_x_athena/Xmu package,cf_cv_xaw_compat,[ AC_TRY_LINK([ $ac_includes_default @@ -6667,7 +6729,6 @@ int check = XmuCompareISOLatin1("big", " ],[ CF_ADD_LIB_AFTER($cf_first_lib,-lXmu) ]) - CF_TRIM_X_LIBS ;; esac fi @@ -7027,7 +7088,6 @@ AC_CHECK_FUNCS( \ zError \ ) ])dnl - dnl --------------------------------------------------------------------------- dnl CF_FUNC_CURSES_VERSION version: 9 updated: 2023/01/05 18:06:10 dnl ---------------------- @@ -7043,13 +7103,13 @@ $ac_includes_default int main(void) { - char temp[1024]; - sprintf(temp, "%.999s\\n", curses_version()); - ${cf_cv_main_return:-return}(0); + char temp[1024]; + sprintf(temp, "%.999s\\n", curses_version()); + ${cf_cv_main_return:-return}(0); }] ,[cf_cv_func_curses_version=yes] ,[cf_cv_func_curses_version=no] ,[cf_cv_func_curses_version=unknown]) rm -f core]) test "$cf_cv_func_curses_version" = yes && AC_DEFINE(HAVE_CURSES_VERSION,1,[Define to 1 if we have curses_version function]) -])dnl +]) diff -Nurp '--exclude=.bzr*' tin-2.6.4/config.guess tin-2.6.5/config.guess --- tin-2.6.4/config.guess 2024-07-29 06:33:17.000000000 +0200 +++ tin-2.6.5/config.guess 2025-07-21 15:32:40.291972160 +0200 @@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2024 Free Software Foundation, Inc. +# Copyright 1992-2025 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2024-07-27' +timestamp='2025-07-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -60,7 +60,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2024 Free Software Foundation, Inc. +Copyright 1992-2025 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -1597,8 +1597,11 @@ EOF *:Unleashed:*:*) GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE ;; - *:Ironclad:*:*) - GUESS=$UNAME_MACHINE-unknown-ironclad + x86_64:[Ii]ronclad:*:*|i?86:[Ii]ronclad:*:*) + GUESS=$UNAME_MACHINE-pc-ironclad-mlibc + ;; + *:[Ii]ronclad:*:*) + GUESS=$UNAME_MACHINE-unknown-ironclad-mlibc ;; esac @@ -1808,8 +1811,8 @@ fi exit 1 # Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp nil t) # time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-format: "%Y-%02m-%02d" # time-stamp-end: "'" # End: diff -Nurp '--exclude=.bzr*' tin-2.6.4/config.sub tin-2.6.5/config.sub --- tin-2.6.4/config.sub 2024-07-29 06:37:20.000000000 +0200 +++ tin-2.6.5/config.sub 2025-07-21 15:32:40.291972160 +0200 @@ -1,10 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2024 Free Software Foundation, Inc. +# Copyright 1992-2025 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268,SC2162 # see below for rationale -timestamp='2024-05-27' +timestamp='2025-07-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -76,7 +76,7 @@ Report bugs and patches to >confdefs.h < int main(int argc, char *argv[]) { - ${cf_cv_main_return:-return}(argc < 0 || argv == 0 || argv[0] == 0); + ${cf_cv_main_return:-return}(argc < 0 || argv == (void*)0 || argv[0] == (void*)0); } _ACEOF @@ -3779,7 +3779,7 @@ irix[56].*) cf_xopen_source="-D_SGI_SOURCE" cf_XOPEN_SOURCE= ;; -linux*gnu|linux*gnuabi64|linux*gnuabin32|linux*gnueabi|linux*gnueabihf|linux*gnux32|uclinux*|gnu*|mint*|k*bsd*-gnu|cygwin|msys|mingw*|linux*uclibc) +linux*gnu*|uclinux*|gnu*|mint*|k*bsd*-gnu|cygwin|msys|mingw*|linux*uclibc) cf_gnu_xopen_source=$cf_XOPEN_SOURCE @@ -7620,8 +7620,10 @@ EOF fi; echo "$as_me:7621: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 +fi -echo "$as_me:7624: checking if you want to use zlib for COMPRESS DEFLATE support" >&5 +# can be also used for cached local overviews, so do not depend on USE_NNTP +echo "$as_me:7626: checking if you want to use zlib for COMPRESS DEFLATE support" >&5 echo $ECHO_N "checking if you want to use zlib for COMPRESS DEFLATE support... $ECHO_C" >&6 # Check whether --with-zlib or --without-zlib was given. @@ -7631,7 +7633,7 @@ if test "${with_zlib+set}" = set; then else use_zlib=yes fi; -echo "$as_me:7634: result: $use_zlib" >&5 +echo "$as_me:7636: result: $use_zlib" >&5 echo "${ECHO_T}$use_zlib" >&6 if test ".$use_zlib" != ".no" ; then @@ -7671,7 +7673,7 @@ if test -n "$cf_searchpath/include" ; th CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 7674 "configure" +#line 7676 "configure" #include "confdefs.h" #include int @@ -7683,16 +7685,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:7686: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:7688: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:7689: \$? = $ac_status" >&5 + echo "$as_me:7691: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:7692: \"$ac_try\"") >&5 + { (eval echo "$as_me:7694: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:7695: \$? = $ac_status" >&5 + echo "$as_me:7697: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -7709,7 +7711,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:7712: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:7714: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -7755,7 +7757,7 @@ if test -n "$cf_searchpath/../include" ; CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 7758 "configure" +#line 7760 "configure" #include "confdefs.h" #include int @@ -7767,16 +7769,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:7770: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:7772: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:7773: \$? = $ac_status" >&5 + echo "$as_me:7775: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:7776: \"$ac_try\"") >&5 + { (eval echo "$as_me:7778: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:7779: \$? = $ac_status" >&5 + echo "$as_me:7781: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -7793,7 +7795,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:7796: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:7798: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -7811,7 +7813,7 @@ echo "${as_me:-configure}:7796: testing fi else -{ { echo "$as_me:7814: error: cannot find zlib under $use_zlib" >&5 +{ { echo "$as_me:7816: error: cannot find zlib under $use_zlib" >&5 echo "$as_me: error: cannot find zlib under $use_zlib" >&2;} { (exit 1); exit 1; }; } fi @@ -7836,7 +7838,7 @@ if test -n "$cf_searchpath/lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:7839: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:7841: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -7865,7 +7867,7 @@ if test -n "$cf_searchpath" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:7868: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:7870: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -7874,7 +7876,7 @@ echo "${as_me:-configure}:7868: testing fi else -{ { echo "$as_me:7877: error: cannot find zlib under $use_zlib" >&5 +{ { echo "$as_me:7879: error: cannot find zlib under $use_zlib" >&5 echo "$as_me: error: cannot find zlib under $use_zlib" >&2;} { (exit 1); exit 1; }; } fi @@ -7882,7 +7884,7 @@ done test -n "$verbose" && echo " setting path value for zlib to $use_zlib" 1>&6 -echo "${as_me:-configure}:7885: testing setting path value for zlib to $use_zlib ..." 1>&5 +echo "${as_me:-configure}:7887: testing setting path value for zlib to $use_zlib ..." 1>&5 ;; esac @@ -7892,12 +7894,12 @@ esac cf_cv_header_path_z= cf_cv_library_path_z= -echo "${as_me:-configure}:7895: testing Starting FIND_LINKAGE(z,zlib) ..." 1>&5 +echo "${as_me:-configure}:7897: testing Starting FIND_LINKAGE(z,zlib) ..." 1>&5 cf_save_LIBS="$LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 7900 "configure" +#line 7902 "configure" #include "confdefs.h" #include @@ -7913,16 +7915,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:7916: \"$ac_link\"") >&5 +if { (eval echo "$as_me:7918: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:7919: \$? = $ac_status" >&5 + echo "$as_me:7921: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:7922: \"$ac_try\"") >&5 + { (eval echo "$as_me:7924: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:7925: \$? = $ac_status" >&5 + echo "$as_me:7927: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_z=yes @@ -7936,7 +7938,7 @@ cat "conftest.$ac_ext" >&5 LIBS="-lz $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 7939 "configure" +#line 7941 "configure" #include "confdefs.h" #include @@ -7952,16 +7954,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:7955: \"$ac_link\"") >&5 +if { (eval echo "$as_me:7957: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:7958: \$? = $ac_status" >&5 + echo "$as_me:7960: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:7961: \"$ac_try\"") >&5 + { (eval echo "$as_me:7963: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:7964: \$? = $ac_status" >&5 + echo "$as_me:7966: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_z=yes @@ -7978,9 +7980,9 @@ cat "conftest.$ac_ext" >&5 test -n "$verbose" && echo " find linkage for z library" 1>&6 -echo "${as_me:-configure}:7981: testing find linkage for z library ..." 1>&5 +echo "${as_me:-configure}:7983: testing find linkage for z library ..." 1>&5 -echo "${as_me:-configure}:7983: testing Searching for headers in FIND_LINKAGE(z,zlib) ..." 1>&5 +echo "${as_me:-configure}:7985: testing Searching for headers in FIND_LINKAGE(z,zlib) ..." 1>&5 cf_save_CPPFLAGS="$CPPFLAGS" cf_test_CPPFLAGS="$CPPFLAGS" @@ -8071,7 +8073,7 @@ cf_search="$cf_search $cf_header_path_li if test -d "$cf_cv_header_path_z" ; then test -n "$verbose" && echo " ... testing $cf_cv_header_path_z" 1>&6 -echo "${as_me:-configure}:8074: testing ... testing $cf_cv_header_path_z ..." 1>&5 +echo "${as_me:-configure}:8076: testing ... testing $cf_cv_header_path_z ..." 1>&5 CPPFLAGS="$cf_save_CPPFLAGS" @@ -8079,7 +8081,7 @@ echo "${as_me:-configure}:8074: testing CPPFLAGS="${CPPFLAGS}-I$cf_cv_header_path_z" cat >"conftest.$ac_ext" <<_ACEOF -#line 8082 "configure" +#line 8084 "configure" #include "confdefs.h" #include @@ -8095,21 +8097,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:8098: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:8100: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:8101: \$? = $ac_status" >&5 + echo "$as_me:8103: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:8104: \"$ac_try\"") >&5 + { (eval echo "$as_me:8106: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:8107: \$? = $ac_status" >&5 + echo "$as_me:8109: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found z headers in $cf_cv_header_path_z" 1>&6 -echo "${as_me:-configure}:8112: testing ... found z headers in $cf_cv_header_path_z ..." 1>&5 +echo "${as_me:-configure}:8114: testing ... found z headers in $cf_cv_header_path_z ..." 1>&5 cf_cv_find_linkage_z=maybe cf_test_CPPFLAGS="$CPPFLAGS" @@ -8127,7 +8129,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_cv_find_linkage_z" = maybe ; then -echo "${as_me:-configure}:8130: testing Searching for z library in FIND_LINKAGE(z,zlib) ..." 1>&5 +echo "${as_me:-configure}:8132: testing Searching for z library in FIND_LINKAGE(z,zlib) ..." 1>&5 cf_save_LIBS="$LIBS" cf_save_LDFLAGS="$LDFLAGS" @@ -8135,7 +8137,7 @@ echo "${as_me:-configure}:8130: testing CPPFLAGS="$cf_test_CPPFLAGS" LIBS="-lz $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 8138 "configure" +#line 8140 "configure" #include "confdefs.h" #include @@ -8151,21 +8153,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:8154: \"$ac_link\"") >&5 +if { (eval echo "$as_me:8156: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:8157: \$? = $ac_status" >&5 + echo "$as_me:8159: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:8160: \"$ac_try\"") >&5 + { (eval echo "$as_me:8162: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:8163: \$? = $ac_status" >&5 + echo "$as_me:8165: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found z library in system" 1>&6 -echo "${as_me:-configure}:8168: testing ... found z library in system ..." 1>&5 +echo "${as_me:-configure}:8170: testing ... found z library in system ..." 1>&5 cf_cv_find_linkage_z=yes else @@ -8246,13 +8248,13 @@ cf_search="$cf_library_path_list $cf_sea if test -d "$cf_cv_library_path_z" ; then test -n "$verbose" && echo " ... testing $cf_cv_library_path_z" 1>&6 -echo "${as_me:-configure}:8249: testing ... testing $cf_cv_library_path_z ..." 1>&5 +echo "${as_me:-configure}:8251: testing ... testing $cf_cv_library_path_z ..." 1>&5 CPPFLAGS="$cf_test_CPPFLAGS" LIBS="-lz $cf_save_LIBS" LDFLAGS="$cf_save_LDFLAGS -L$cf_cv_library_path_z" cat >"conftest.$ac_ext" <<_ACEOF -#line 8255 "configure" +#line 8257 "configure" #include "confdefs.h" #include @@ -8268,21 +8270,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:8271: \"$ac_link\"") >&5 +if { (eval echo "$as_me:8273: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:8274: \$? = $ac_status" >&5 + echo "$as_me:8276: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:8277: \"$ac_try\"") >&5 + { (eval echo "$as_me:8279: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:8280: \$? = $ac_status" >&5 + echo "$as_me:8282: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found z library in $cf_cv_library_path_z" 1>&6 -echo "${as_me:-configure}:8285: testing ... found z library in $cf_cv_library_path_z ..." 1>&5 +echo "${as_me:-configure}:8287: testing ... found z library in $cf_cv_library_path_z ..." 1>&5 cf_cv_find_linkage_z=yes cf_cv_library_file_z="-lz" @@ -8344,7 +8346,7 @@ if test -n "$cf_cv_header_path_z" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 8347 "configure" +#line 8349 "configure" #include "confdefs.h" #include int @@ -8356,16 +8358,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:8359: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:8361: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:8362: \$? = $ac_status" >&5 + echo "$as_me:8364: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:8365: \"$ac_try\"") >&5 + { (eval echo "$as_me:8367: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:8368: \$? = $ac_status" >&5 + echo "$as_me:8370: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -8382,7 +8384,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:8385: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:8387: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -8418,7 +8420,7 @@ if test -n "$cf_cv_library_path_z" ; the if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:8421: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:8423: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -8443,7 +8445,7 @@ done LIBS="$cf_add_libs" else -{ echo "$as_me:8446: WARNING: Cannot find z library" >&5 +{ echo "$as_me:8448: WARNING: Cannot find z library" >&5 echo "$as_me: WARNING: Cannot find z library" >&2;} fi @@ -8452,13 +8454,13 @@ for ac_func in \ do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:8455: checking for $ac_func" >&5 +echo "$as_me:8457: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 8461 "configure" +#line 8463 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -8489,16 +8491,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:8492: \"$ac_link\"") >&5 +if { (eval echo "$as_me:8494: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:8495: \$? = $ac_status" >&5 + echo "$as_me:8497: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:8498: \"$ac_try\"") >&5 + { (eval echo "$as_me:8500: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:8501: \$? = $ac_status" >&5 + echo "$as_me:8503: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -8508,7 +8510,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:8511: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:8513: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <&5 echo $ECHO_N "checking if you want to compile-in debug support... $ECHO_C" >&6 @@ -13836,6 +13836,20 @@ rm -f "conftest.$ac_objext" "conftest$ac ;; esac +for cf_required in $cf_ncuconfig_root +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done + for cf_add_cflags in $cf_pkg_cflags do case "x$cf_add_cflags" in @@ -13979,7 +13993,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 13982 "configure" +#line 13996 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -13991,37 +14005,37 @@ initscr(); mousemask(0,0); tigetstr((cha } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:13994: \"$ac_link\"") >&5 +if { (eval echo "$as_me:14008: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:13997: \$? = $ac_status" >&5 + echo "$as_me:14011: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:14000: \"$ac_try\"") >&5 + { (eval echo "$as_me:14014: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14003: \$? = $ac_status" >&5 + echo "$as_me:14017: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test "$cross_compiling" = yes; then cf_have_ncuconfig=maybe else cat >"conftest.$ac_ext" <<_ACEOF -#line 14009 "configure" +#line 14023 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int main(void) { const char *xx = curses_version(); return (xx == 0); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:14016: \"$ac_link\"") >&5 +if { (eval echo "$as_me:14030: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:14019: \$? = $ac_status" >&5 + echo "$as_me:14033: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:14021: \"$ac_try\"") >&5 + { (eval echo "$as_me:14035: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14024: \$? = $ac_status" >&5 + echo "$as_me:14038: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_have_ncuconfig=yes else @@ -14038,7 +14052,7 @@ cat "conftest.$ac_ext" >&5 cf_have_ncuconfig=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:14041: result: $cf_have_ncuconfig" >&5 + echo "$as_me:14055: result: $cf_have_ncuconfig" >&5 echo "${ECHO_T}$cf_have_ncuconfig" >&6 test "$cf_have_ncuconfig" = maybe && cf_have_ncuconfig=yes if test "$cf_have_ncuconfig" != "yes" @@ -14054,7 +14068,7 @@ EOF NCURSES_CONFIG_PKG=$cf_ncuconfig_root -echo "$as_me:14057: checking for terminfo header" >&5 +echo "$as_me:14071: checking for terminfo header" >&5 echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14072,7 +14086,7 @@ esac for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h" do cat >"conftest.$ac_ext" <<_ACEOF -#line 14075 "configure" +#line 14089 "configure" #include "confdefs.h" #include #include <${cf_cv_ncurses_header:-curses.h}> @@ -14087,16 +14101,16 @@ int x = auto_left_margin; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14090: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14104: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14093: \$? = $ac_status" >&5 + echo "$as_me:14107: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14096: \"$ac_try\"") >&5 + { (eval echo "$as_me:14110: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14099: \$? = $ac_status" >&5 + echo "$as_me:14113: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header="$cf_test" @@ -14112,7 +14126,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:14115: result: $cf_cv_term_header" >&5 +echo "$as_me:14129: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 # Set definitions to allow ifdef'ing to accommodate subdirectories @@ -14147,7 +14161,7 @@ esac fi else - echo "$as_me:14150: result: no" >&5 + echo "$as_me:14164: result: no" >&5 echo "${ECHO_T}no" >&6 NCURSES_CONFIG_PKG=none fi @@ -14163,7 +14177,7 @@ if test -n "$ac_tool_prefix"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:14166: checking for $ac_word" >&5 +echo "$as_me:14180: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_NCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14178,7 +14192,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_NCURSES_CONFIG="$ac_tool_prefix$ac_prog" -echo "$as_me:14181: found $ac_dir/$ac_word" >&5 +echo "$as_me:14195: found $ac_dir/$ac_word" >&5 break done @@ -14186,10 +14200,10 @@ fi fi NCURSES_CONFIG=$ac_cv_prog_NCURSES_CONFIG if test -n "$NCURSES_CONFIG"; then - echo "$as_me:14189: result: $NCURSES_CONFIG" >&5 + echo "$as_me:14203: result: $NCURSES_CONFIG" >&5 echo "${ECHO_T}$NCURSES_CONFIG" >&6 else - echo "$as_me:14192: result: no" >&5 + echo "$as_me:14206: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -14202,7 +14216,7 @@ if test -z "$NCURSES_CONFIG"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:14205: checking for $ac_word" >&5 +echo "$as_me:14219: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_NCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14217,7 +14231,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_ac_ct_NCURSES_CONFIG="$ac_prog" -echo "$as_me:14220: found $ac_dir/$ac_word" >&5 +echo "$as_me:14234: found $ac_dir/$ac_word" >&5 break done @@ -14225,10 +14239,10 @@ fi fi ac_ct_NCURSES_CONFIG=$ac_cv_prog_ac_ct_NCURSES_CONFIG if test -n "$ac_ct_NCURSES_CONFIG"; then - echo "$as_me:14228: result: $ac_ct_NCURSES_CONFIG" >&5 + echo "$as_me:14242: result: $ac_ct_NCURSES_CONFIG" >&5 echo "${ECHO_T}$ac_ct_NCURSES_CONFIG" >&6 else - echo "$as_me:14231: result: no" >&5 + echo "$as_me:14245: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -14385,7 +14399,7 @@ LIBS="$cf_add_libs" # even with config script, some packages use no-override for curses.h -echo "$as_me:14388: checking if we have identified curses headers" >&5 +echo "$as_me:14402: checking if we have identified curses headers" >&5 echo $ECHO_N "checking if we have identified curses headers... $ECHO_C" >&6 if test "${cf_cv_ncurses_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14397,7 +14411,7 @@ for cf_header in \ curses.h ncurses/curses.h do cat >"conftest.$ac_ext" <<_ACEOF -#line 14400 "configure" +#line 14414 "configure" #include "confdefs.h" #include <${cf_header}> int @@ -14409,16 +14423,16 @@ initscr(); endwin() } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14412: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14426: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14415: \$? = $ac_status" >&5 + echo "$as_me:14429: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14418: \"$ac_try\"") >&5 + { (eval echo "$as_me:14432: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14421: \$? = $ac_status" >&5 + echo "$as_me:14435: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_header=$cf_header; break else @@ -14429,11 +14443,11 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:14432: result: $cf_cv_ncurses_header" >&5 +echo "$as_me:14446: result: $cf_cv_ncurses_header" >&5 echo "${ECHO_T}$cf_cv_ncurses_header" >&6 if test "$cf_cv_ncurses_header" = none ; then - { { echo "$as_me:14436: error: No curses header-files found" >&5 + { { echo "$as_me:14450: error: No curses header-files found" >&5 echo "$as_me: error: No curses header-files found" >&2;} { (exit 1); exit 1; }; } fi @@ -14443,23 +14457,23 @@ fi for ac_header in $cf_cv_ncurses_header do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:14446: checking for $ac_header" >&5 +echo "$as_me:14460: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 14452 "configure" +#line 14466 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:14456: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:14470: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:14462: \$? = $ac_status" >&5 + echo "$as_me:14476: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -14478,7 +14492,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:14481: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:14495: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <"conftest.$ac_ext" <<_ACEOF -#line 14537 "configure" +#line 14551 "configure" #include "confdefs.h" #include int @@ -14546,16 +14560,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14549: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14563: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14552: \$? = $ac_status" >&5 + echo "$as_me:14566: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14555: \"$ac_try\"") >&5 + { (eval echo "$as_me:14569: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14558: \$? = $ac_status" >&5 + echo "$as_me:14572: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -14572,7 +14586,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:14575: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:14589: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -14591,7 +14605,7 @@ fi } -echo "$as_me:14594: checking for $cf_ncuhdr_root header in include-path" >&5 +echo "$as_me:14608: checking for $cf_ncuhdr_root header in include-path" >&5 echo $ECHO_N "checking for $cf_ncuhdr_root header in include-path... $ECHO_C" >&6 if test "${cf_cv_ncurses_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14603,7 +14617,7 @@ else do cat >"conftest.$ac_ext" <<_ACEOF -#line 14606 "configure" +#line 14620 "configure" #include "confdefs.h" #include <$cf_header> @@ -14627,16 +14641,16 @@ printf("old\\n"); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14630: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14644: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14633: \$? = $ac_status" >&5 + echo "$as_me:14647: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14636: \"$ac_try\"") >&5 + { (eval echo "$as_me:14650: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14639: \$? = $ac_status" >&5 + echo "$as_me:14653: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_h=$cf_header @@ -14651,14 +14665,14 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:14654: result: $cf_cv_ncurses_h" >&5 +echo "$as_me:14668: result: $cf_cv_ncurses_h" >&5 echo "${ECHO_T}$cf_cv_ncurses_h" >&6 if test "$cf_cv_ncurses_h" != no ; then cf_cv_ncurses_header=$cf_cv_ncurses_h else -echo "$as_me:14661: checking for $cf_ncuhdr_root include-path" >&5 +echo "$as_me:14675: checking for $cf_ncuhdr_root include-path" >&5 echo $ECHO_N "checking for $cf_ncuhdr_root include-path... $ECHO_C" >&6 if test "${cf_cv_ncurses_h2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -14779,7 +14793,7 @@ if test -n "$cf_incdir" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 14782 "configure" +#line 14796 "configure" #include "confdefs.h" #include int @@ -14791,16 +14805,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14794: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14808: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14797: \$? = $ac_status" >&5 + echo "$as_me:14811: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14800: \"$ac_try\"") >&5 + { (eval echo "$as_me:14814: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14803: \$? = $ac_status" >&5 + echo "$as_me:14817: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -14817,7 +14831,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:14820: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:14834: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -14840,7 +14854,7 @@ fi do cat >"conftest.$ac_ext" <<_ACEOF -#line 14843 "configure" +#line 14857 "configure" #include "confdefs.h" #include <$cf_header> @@ -14864,16 +14878,16 @@ printf("old\\n"); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14867: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14881: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14870: \$? = $ac_status" >&5 + echo "$as_me:14884: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14873: \"$ac_try\"") >&5 + { (eval echo "$as_me:14887: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14876: \$? = $ac_status" >&5 + echo "$as_me:14890: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_h2=$cf_header @@ -14894,12 +14908,12 @@ rm -f "conftest.$ac_objext" "conftest.$a CPPFLAGS="$cf_save2_CPPFLAGS" test "$cf_cv_ncurses_h2" != no && break done - test "$cf_cv_ncurses_h2" = no && { { echo "$as_me:14897: error: not found" >&5 + test "$cf_cv_ncurses_h2" = no && { { echo "$as_me:14911: error: not found" >&5 echo "$as_me: error: not found" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:14902: result: $cf_cv_ncurses_h2" >&5 +echo "$as_me:14916: result: $cf_cv_ncurses_h2" >&5 echo "${ECHO_T}$cf_cv_ncurses_h2" >&6 cf_1st_incdir=`echo "$cf_cv_ncurses_h2" | sed -e 's%/[^/]*$%%'` @@ -14935,7 +14949,7 @@ if test -n "$cf_1st_incdir" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 14938 "configure" +#line 14952 "configure" #include "confdefs.h" #include int @@ -14947,16 +14961,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:14950: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:14964: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:14953: \$? = $ac_status" >&5 + echo "$as_me:14967: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:14956: \"$ac_try\"") >&5 + { (eval echo "$as_me:14970: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:14959: \$? = $ac_status" >&5 + echo "$as_me:14973: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -14973,7 +14987,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:14976: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:14990: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -15021,7 +15035,7 @@ EOF ;; esac -echo "$as_me:15024: checking for terminfo header" >&5 +echo "$as_me:15038: checking for terminfo header" >&5 echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -15039,7 +15053,7 @@ esac for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h" do cat >"conftest.$ac_ext" <<_ACEOF -#line 15042 "configure" +#line 15056 "configure" #include "confdefs.h" #include #include <${cf_cv_ncurses_header:-curses.h}> @@ -15054,16 +15068,16 @@ int x = auto_left_margin; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:15057: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:15071: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:15060: \$? = $ac_status" >&5 + echo "$as_me:15074: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:15063: \"$ac_try\"") >&5 + { (eval echo "$as_me:15077: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15066: \$? = $ac_status" >&5 + echo "$as_me:15080: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header="$cf_test" @@ -15079,7 +15093,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:15082: result: $cf_cv_term_header" >&5 +echo "$as_me:15096: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 # Set definitions to allow ifdef'ing to accommodate subdirectories @@ -15117,7 +15131,7 @@ cat >>confdefs.h <<\EOF #define NCURSES 1 EOF -echo "$as_me:15120: checking for ncurses version" >&5 +echo "$as_me:15134: checking for ncurses version" >&5 echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6 if test "${cf_cv_ncurses_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -15143,10 +15157,10 @@ Autoconf "old" #endif EOF cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out" - { (eval echo "$as_me:15146: \"$cf_try\"") >&5 + { (eval echo "$as_me:15160: \"$cf_try\"") >&5 (eval $cf_try) 2>&5 ac_status=$? - echo "$as_me:15149: \$? = $ac_status" >&5 + echo "$as_me:15163: \$? = $ac_status" >&5 (exit "$ac_status"); } if test -f conftest.out ; then cf_out=`sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%' conftest.out` @@ -15156,7 +15170,7 @@ EOF else cat >"conftest.$ac_ext" <<_ACEOF -#line 15159 "configure" +#line 15173 "configure" #include "confdefs.h" $ac_includes_default @@ -15183,15 +15197,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:15186: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15200: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15189: \$? = $ac_status" >&5 + echo "$as_me:15203: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:15191: \"$ac_try\"") >&5 + { (eval echo "$as_me:15205: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15194: \$? = $ac_status" >&5 + echo "$as_me:15208: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_version=`cat $cf_tempfile` @@ -15205,7 +15219,7 @@ fi rm -f "$cf_tempfile" fi -echo "$as_me:15208: result: $cf_cv_ncurses_version" >&5 +echo "$as_me:15222: result: $cf_cv_ncurses_version" >&5 echo "${ECHO_T}$cf_cv_ncurses_version" >&6 test "$cf_cv_ncurses_version" = no || cat >>confdefs.h <<\EOF @@ -15218,7 +15232,7 @@ cf_nculib_root=ncurses # to link gpm. cf_ncurses_LIBS="" cf_ncurses_SAVE="$LIBS" -echo "$as_me:15221: checking for Gpm_Open in -lgpm" >&5 +echo "$as_me:15235: checking for Gpm_Open in -lgpm" >&5 echo $ECHO_N "checking for Gpm_Open in -lgpm... $ECHO_C" >&6 if test "${ac_cv_lib_gpm_Gpm_Open+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -15226,7 +15240,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgpm $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15229 "configure" +#line 15243 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -15245,16 +15259,16 @@ Gpm_Open (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15248: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15262: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15251: \$? = $ac_status" >&5 + echo "$as_me:15265: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15254: \"$ac_try\"") >&5 + { (eval echo "$as_me:15268: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15257: \$? = $ac_status" >&5 + echo "$as_me:15271: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gpm_Gpm_Open=yes else @@ -15265,10 +15279,10 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:15268: result: $ac_cv_lib_gpm_Gpm_Open" >&5 +echo "$as_me:15282: result: $ac_cv_lib_gpm_Gpm_Open" >&5 echo "${ECHO_T}$ac_cv_lib_gpm_Gpm_Open" >&6 if test "$ac_cv_lib_gpm_Gpm_Open" = yes; then - echo "$as_me:15271: checking for initscr in -lgpm" >&5 + echo "$as_me:15285: checking for initscr in -lgpm" >&5 echo $ECHO_N "checking for initscr in -lgpm... $ECHO_C" >&6 if test "${ac_cv_lib_gpm_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -15276,7 +15290,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgpm $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15279 "configure" +#line 15293 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -15295,16 +15309,16 @@ initscr (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15298: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15312: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15301: \$? = $ac_status" >&5 + echo "$as_me:15315: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15304: \"$ac_try\"") >&5 + { (eval echo "$as_me:15318: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15307: \$? = $ac_status" >&5 + echo "$as_me:15321: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gpm_initscr=yes else @@ -15315,7 +15329,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:15318: result: $ac_cv_lib_gpm_initscr" >&5 +echo "$as_me:15332: result: $ac_cv_lib_gpm_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_gpm_initscr" >&6 if test "$ac_cv_lib_gpm_initscr" = yes; then LIBS="$cf_ncurses_SAVE" @@ -15330,7 +15344,7 @@ freebsd*) # This is only necessary if you are linking against an obsolete # version of ncurses (but it should do no harm, since it is static). if test "$cf_nculib_root" = ncurses ; then - echo "$as_me:15333: checking for tgoto in -lmytinfo" >&5 + echo "$as_me:15347: checking for tgoto in -lmytinfo" >&5 echo $ECHO_N "checking for tgoto in -lmytinfo... $ECHO_C" >&6 if test "${ac_cv_lib_mytinfo_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -15338,7 +15352,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lmytinfo $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15341 "configure" +#line 15355 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -15357,16 +15371,16 @@ tgoto (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15360: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15374: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15363: \$? = $ac_status" >&5 + echo "$as_me:15377: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15366: \"$ac_try\"") >&5 + { (eval echo "$as_me:15380: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15369: \$? = $ac_status" >&5 + echo "$as_me:15383: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_mytinfo_tgoto=yes else @@ -15377,7 +15391,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:15380: result: $ac_cv_lib_mytinfo_tgoto" >&5 +echo "$as_me:15394: result: $ac_cv_lib_mytinfo_tgoto" >&5 echo "${ECHO_T}$ac_cv_lib_mytinfo_tgoto" >&6 if test "$ac_cv_lib_mytinfo_tgoto" = yes; then cf_ncurses_LIBS="-lmytinfo $cf_ncurses_LIBS" @@ -15426,13 +15440,13 @@ else eval 'cf_cv_have_lib_'"$cf_nculib_root"'=no' cf_libdir="" - echo "$as_me:15429: checking for initscr" >&5 + echo "$as_me:15443: checking for initscr" >&5 echo $ECHO_N "checking for initscr... $ECHO_C" >&6 if test "${ac_cv_func_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 15435 "configure" +#line 15449 "configure" #include "confdefs.h" #define initscr autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -15463,16 +15477,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15466: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15480: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15469: \$? = $ac_status" >&5 + echo "$as_me:15483: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15472: \"$ac_try\"") >&5 + { (eval echo "$as_me:15486: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15475: \$? = $ac_status" >&5 + echo "$as_me:15489: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_initscr=yes else @@ -15482,18 +15496,18 @@ ac_cv_func_initscr=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:15485: result: $ac_cv_func_initscr" >&5 +echo "$as_me:15499: result: $ac_cv_func_initscr" >&5 echo "${ECHO_T}$ac_cv_func_initscr" >&6 if test "$ac_cv_func_initscr" = yes; then eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' else cf_save_LIBS="$LIBS" - echo "$as_me:15492: checking for initscr in -l$cf_nculib_root" >&5 + echo "$as_me:15506: checking for initscr in -l$cf_nculib_root" >&5 echo $ECHO_N "checking for initscr in -l$cf_nculib_root... $ECHO_C" >&6 LIBS="-l$cf_nculib_root $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15496 "configure" +#line 15510 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -15505,25 +15519,25 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15508: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15522: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15511: \$? = $ac_status" >&5 + echo "$as_me:15525: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15514: \"$ac_try\"") >&5 + { (eval echo "$as_me:15528: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15517: \$? = $ac_status" >&5 + echo "$as_me:15531: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:15519: result: yes" >&5 + echo "$as_me:15533: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:15526: result: no" >&5 +echo "$as_me:15540: result: no" >&5 echo "${ECHO_T}no" >&6 cf_search= @@ -15591,11 +15605,11 @@ cf_search="$cf_library_path_list $cf_sea for cf_libdir in $cf_search do - echo "$as_me:15594: checking for -l$cf_nculib_root in $cf_libdir" >&5 + echo "$as_me:15608: checking for -l$cf_nculib_root in $cf_libdir" >&5 echo $ECHO_N "checking for -l$cf_nculib_root in $cf_libdir... $ECHO_C" >&6 LIBS="-L$cf_libdir -l$cf_nculib_root $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15598 "configure" +#line 15612 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -15607,25 +15621,25 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15610: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15624: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15613: \$? = $ac_status" >&5 + echo "$as_me:15627: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15616: \"$ac_try\"") >&5 + { (eval echo "$as_me:15630: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15619: \$? = $ac_status" >&5 + echo "$as_me:15633: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:15621: result: yes" >&5 + echo "$as_me:15635: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' break else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:15628: result: no" >&5 +echo "$as_me:15642: result: no" >&5 echo "${ECHO_T}no" >&6 LIBS="$cf_save_LIBS" fi @@ -15640,7 +15654,7 @@ fi eval 'cf_found_library="$cf_cv_have_lib_'"$cf_nculib_root"\" if test "$cf_found_library" = no ; then - { { echo "$as_me:15643: error: Cannot link $cf_nculib_root library" >&5 + { { echo "$as_me:15657: error: Cannot link $cf_nculib_root library" >&5 echo "$as_me: error: Cannot link $cf_nculib_root library" >&2;} { (exit 1); exit 1; }; } fi @@ -15648,7 +15662,7 @@ fi fi if test -n "$cf_ncurses_LIBS" ; then - echo "$as_me:15651: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5 + echo "$as_me:15665: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5 echo $ECHO_N "checking if we can link $cf_nculib_root without $cf_ncurses_LIBS... $ECHO_C" >&6 cf_ncurses_SAVE="$LIBS" for p in $cf_ncurses_LIBS ; do @@ -15658,7 +15672,7 @@ echo $ECHO_N "checking if we can link $c fi done cat >"conftest.$ac_ext" <<_ACEOF -#line 15661 "configure" +#line 15675 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -15670,23 +15684,23 @@ initscr(); mousemask(0,0); tigetstr((cha } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15673: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15687: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15676: \$? = $ac_status" >&5 + echo "$as_me:15690: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15679: \"$ac_try\"") >&5 + { (eval echo "$as_me:15693: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15682: \$? = $ac_status" >&5 + echo "$as_me:15696: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:15684: result: yes" >&5 + echo "$as_me:15698: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:15689: result: no" >&5 +echo "$as_me:15703: result: no" >&5 echo "${ECHO_T}no" >&6 LIBS="$cf_ncurses_SAVE" fi @@ -15709,23 +15723,23 @@ fi for cf_hdr in stdlib.h wchar.h wctype.h do - echo "$as_me:15712: checking for $cf_hdr" >&5 + echo "$as_me:15726: checking for $cf_hdr" >&5 echo $ECHO_N "checking for $cf_hdr... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 15715 "configure" +#line 15729 "configure" #include "confdefs.h" #include #include <$cf_hdr> _ACEOF -if { (eval echo "$as_me:15722: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:15736: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:15728: \$? = $ac_status" >&5 + echo "$as_me:15742: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -15743,7 +15757,7 @@ else cf_found=no fi rm -f conftest.err "conftest.$ac_ext" -echo "$as_me:15746: result: $cf_found" >&5 +echo "$as_me:15760: result: $cf_found" >&5 echo "${ECHO_T}$cf_found" >&6 if test $cf_found = yes ; then @@ -15756,13 +15770,13 @@ EOF fi done - echo "$as_me:15759: checking for wide char and multibyte support" >&5 + echo "$as_me:15773: checking for wide char and multibyte support" >&5 echo $ECHO_N "checking for wide char and multibyte support... $ECHO_C" >&6 if test "${am_cv_multibyte_able+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 15765 "configure" +#line 15779 "configure" #include "confdefs.h" #include #ifdef HAVE_STDLIB_H @@ -15821,16 +15835,16 @@ const char icb[5] = {0xa4, 0xa4, 0xa4, 0 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15824: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15838: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15827: \$? = $ac_status" >&5 + echo "$as_me:15841: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15830: \"$ac_try\"") >&5 + { (eval echo "$as_me:15844: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15833: \$? = $ac_status" >&5 + echo "$as_me:15847: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_multibyte_able=yes else @@ -15839,7 +15853,7 @@ cat "conftest.$ac_ext" >&5 cf_save_LIBS="$LIBS" LIBS="-lutf8 $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 15842 "configure" +#line 15856 "configure" #include "confdefs.h" #include int @@ -15888,16 +15902,16 @@ const char icb[5] = {0xa4, 0xa4, 0xa4, 0 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:15891: \"$ac_link\"") >&5 +if { (eval echo "$as_me:15905: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:15894: \$? = $ac_status" >&5 + echo "$as_me:15908: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:15897: \"$ac_try\"") >&5 + { (eval echo "$as_me:15911: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:15900: \$? = $ac_status" >&5 + echo "$as_me:15914: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_multibyte_able=libutf8 else @@ -15912,7 +15926,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:15915: result: $am_cv_multibyte_able" >&5 +echo "$as_me:15929: result: $am_cv_multibyte_able" >&5 echo "${ECHO_T}$am_cv_multibyte_able" >&6 if test "$am_cv_multibyte_able" != no; then if test "$am_cv_multibyte_able" = libutf8; then @@ -15934,13 +15948,13 @@ cf_ncuconfig_root=ncursesw cf_have_ncuconfig=no if test "x${PKG_CONFIG:=none}" != xnone; then - echo "$as_me:15937: checking pkg-config for $cf_ncuconfig_root" >&5 + echo "$as_me:15951: checking pkg-config for $cf_ncuconfig_root" >&5 echo $ECHO_N "checking pkg-config for $cf_ncuconfig_root... $ECHO_C" >&6 if "$PKG_CONFIG" --exists $cf_ncuconfig_root ; then - echo "$as_me:15940: result: yes" >&5 + echo "$as_me:15954: result: yes" >&5 echo "${ECHO_T}yes" >&6 - echo "$as_me:15943: checking if the $cf_ncuconfig_root package files work" >&5 + echo "$as_me:15957: checking if the $cf_ncuconfig_root package files work" >&5 echo $ECHO_N "checking if the $cf_ncuconfig_root package files work... $ECHO_C" >&6 cf_have_ncuconfig=unknown @@ -16073,7 +16087,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 16076 "configure" +#line 16090 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -16085,37 +16099,37 @@ initscr(); mousemask(0,0); tigetstr((cha } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:16088: \"$ac_link\"") >&5 +if { (eval echo "$as_me:16102: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:16091: \$? = $ac_status" >&5 + echo "$as_me:16105: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:16094: \"$ac_try\"") >&5 + { (eval echo "$as_me:16108: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16097: \$? = $ac_status" >&5 + echo "$as_me:16111: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test "$cross_compiling" = yes; then cf_test_ncuconfig=maybe else cat >"conftest.$ac_ext" <<_ACEOF -#line 16103 "configure" +#line 16117 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int main(void) { const char *xx = curses_version(); return (xx == 0); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:16110: \"$ac_link\"") >&5 +if { (eval echo "$as_me:16124: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:16113: \$? = $ac_status" >&5 + echo "$as_me:16127: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:16115: \"$ac_try\"") >&5 + { (eval echo "$as_me:16129: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16118: \$? = $ac_status" >&5 + echo "$as_me:16132: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_test_ncuconfig=yes else @@ -16146,6 +16160,20 @@ rm -f "conftest.$ac_objext" "conftest$ac ;; esac +for cf_required in $cf_ncuconfig_root +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done + for cf_add_cflags in $cf_pkg_cflags do case "x$cf_add_cflags" in @@ -16289,7 +16317,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 16292 "configure" +#line 16320 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -16301,37 +16329,37 @@ initscr(); mousemask(0,0); tigetstr((cha } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:16304: \"$ac_link\"") >&5 +if { (eval echo "$as_me:16332: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:16307: \$? = $ac_status" >&5 + echo "$as_me:16335: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:16310: \"$ac_try\"") >&5 + { (eval echo "$as_me:16338: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16313: \$? = $ac_status" >&5 + echo "$as_me:16341: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test "$cross_compiling" = yes; then cf_have_ncuconfig=maybe else cat >"conftest.$ac_ext" <<_ACEOF -#line 16319 "configure" +#line 16347 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int main(void) { const char *xx = curses_version(); return (xx == 0); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:16326: \"$ac_link\"") >&5 +if { (eval echo "$as_me:16354: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:16329: \$? = $ac_status" >&5 + echo "$as_me:16357: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:16331: \"$ac_try\"") >&5 + { (eval echo "$as_me:16359: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16334: \$? = $ac_status" >&5 + echo "$as_me:16362: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_have_ncuconfig=yes else @@ -16348,7 +16376,7 @@ cat "conftest.$ac_ext" >&5 cf_have_ncuconfig=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:16351: result: $cf_have_ncuconfig" >&5 + echo "$as_me:16379: result: $cf_have_ncuconfig" >&5 echo "${ECHO_T}$cf_have_ncuconfig" >&6 test "$cf_have_ncuconfig" = maybe && cf_have_ncuconfig=yes if test "$cf_have_ncuconfig" != "yes" @@ -16364,7 +16392,7 @@ EOF NCURSES_CONFIG_PKG=$cf_ncuconfig_root -echo "$as_me:16367: checking for terminfo header" >&5 +echo "$as_me:16395: checking for terminfo header" >&5 echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -16382,7 +16410,7 @@ esac for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h" do cat >"conftest.$ac_ext" <<_ACEOF -#line 16385 "configure" +#line 16413 "configure" #include "confdefs.h" #include #include <${cf_cv_ncurses_header:-curses.h}> @@ -16397,16 +16425,16 @@ int x = auto_left_margin; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:16400: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:16428: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:16403: \$? = $ac_status" >&5 + echo "$as_me:16431: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:16406: \"$ac_try\"") >&5 + { (eval echo "$as_me:16434: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16409: \$? = $ac_status" >&5 + echo "$as_me:16437: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header="$cf_test" @@ -16422,7 +16450,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:16425: result: $cf_cv_term_header" >&5 +echo "$as_me:16453: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 # Set definitions to allow ifdef'ing to accommodate subdirectories @@ -16457,7 +16485,7 @@ esac fi else - echo "$as_me:16460: result: no" >&5 + echo "$as_me:16488: result: no" >&5 echo "${ECHO_T}no" >&6 NCURSES_CONFIG_PKG=none fi @@ -16473,7 +16501,7 @@ if test -n "$ac_tool_prefix"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:16476: checking for $ac_word" >&5 +echo "$as_me:16504: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_NCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -16488,7 +16516,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_NCURSES_CONFIG="$ac_tool_prefix$ac_prog" -echo "$as_me:16491: found $ac_dir/$ac_word" >&5 +echo "$as_me:16519: found $ac_dir/$ac_word" >&5 break done @@ -16496,10 +16524,10 @@ fi fi NCURSES_CONFIG=$ac_cv_prog_NCURSES_CONFIG if test -n "$NCURSES_CONFIG"; then - echo "$as_me:16499: result: $NCURSES_CONFIG" >&5 + echo "$as_me:16527: result: $NCURSES_CONFIG" >&5 echo "${ECHO_T}$NCURSES_CONFIG" >&6 else - echo "$as_me:16502: result: no" >&5 + echo "$as_me:16530: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -16512,7 +16540,7 @@ if test -z "$NCURSES_CONFIG"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:16515: checking for $ac_word" >&5 +echo "$as_me:16543: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_NCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -16527,7 +16555,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_ac_ct_NCURSES_CONFIG="$ac_prog" -echo "$as_me:16530: found $ac_dir/$ac_word" >&5 +echo "$as_me:16558: found $ac_dir/$ac_word" >&5 break done @@ -16535,10 +16563,10 @@ fi fi ac_ct_NCURSES_CONFIG=$ac_cv_prog_ac_ct_NCURSES_CONFIG if test -n "$ac_ct_NCURSES_CONFIG"; then - echo "$as_me:16538: result: $ac_ct_NCURSES_CONFIG" >&5 + echo "$as_me:16566: result: $ac_ct_NCURSES_CONFIG" >&5 echo "${ECHO_T}$ac_ct_NCURSES_CONFIG" >&6 else - echo "$as_me:16541: result: no" >&5 + echo "$as_me:16569: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -16695,7 +16723,7 @@ LIBS="$cf_add_libs" # even with config script, some packages use no-override for curses.h -echo "$as_me:16698: checking if we have identified curses headers" >&5 +echo "$as_me:16726: checking if we have identified curses headers" >&5 echo $ECHO_N "checking if we have identified curses headers... $ECHO_C" >&6 if test "${cf_cv_ncurses_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -16707,7 +16735,7 @@ for cf_header in \ curses.h ncursesw/curses.h do cat >"conftest.$ac_ext" <<_ACEOF -#line 16710 "configure" +#line 16738 "configure" #include "confdefs.h" #include <${cf_header}> int @@ -16719,16 +16747,16 @@ initscr(); endwin() } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:16722: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:16750: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:16725: \$? = $ac_status" >&5 + echo "$as_me:16753: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:16728: \"$ac_try\"") >&5 + { (eval echo "$as_me:16756: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16731: \$? = $ac_status" >&5 + echo "$as_me:16759: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_header=$cf_header; break else @@ -16739,11 +16767,11 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:16742: result: $cf_cv_ncurses_header" >&5 +echo "$as_me:16770: result: $cf_cv_ncurses_header" >&5 echo "${ECHO_T}$cf_cv_ncurses_header" >&6 if test "$cf_cv_ncurses_header" = none ; then - { { echo "$as_me:16746: error: No curses header-files found" >&5 + { { echo "$as_me:16774: error: No curses header-files found" >&5 echo "$as_me: error: No curses header-files found" >&2;} { (exit 1); exit 1; }; } fi @@ -16753,23 +16781,23 @@ fi for ac_header in $cf_cv_ncurses_header do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:16756: checking for $ac_header" >&5 +echo "$as_me:16784: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 16762 "configure" +#line 16790 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:16766: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:16794: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:16772: \$? = $ac_status" >&5 + echo "$as_me:16800: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -16788,7 +16816,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:16791: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:16819: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <"conftest.$ac_ext" <<_ACEOF -#line 16847 "configure" +#line 16875 "configure" #include "confdefs.h" #include int @@ -16856,16 +16884,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:16859: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:16887: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:16862: \$? = $ac_status" >&5 + echo "$as_me:16890: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:16865: \"$ac_try\"") >&5 + { (eval echo "$as_me:16893: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16868: \$? = $ac_status" >&5 + echo "$as_me:16896: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -16882,7 +16910,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:16885: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:16913: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -16901,7 +16929,7 @@ fi } -echo "$as_me:16904: checking for $cf_ncuhdr_root header in include-path" >&5 +echo "$as_me:16932: checking for $cf_ncuhdr_root header in include-path" >&5 echo $ECHO_N "checking for $cf_ncuhdr_root header in include-path... $ECHO_C" >&6 if test "${cf_cv_ncurses_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -16913,7 +16941,7 @@ else do cat >"conftest.$ac_ext" <<_ACEOF -#line 16916 "configure" +#line 16944 "configure" #include "confdefs.h" #define _XOPEN_SOURCE_EXTENDED @@ -16945,16 +16973,16 @@ printf("old\\n"); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:16948: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:16976: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:16951: \$? = $ac_status" >&5 + echo "$as_me:16979: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:16954: \"$ac_try\"") >&5 + { (eval echo "$as_me:16982: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:16957: \$? = $ac_status" >&5 + echo "$as_me:16985: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_h=$cf_header @@ -16969,14 +16997,14 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:16972: result: $cf_cv_ncurses_h" >&5 +echo "$as_me:17000: result: $cf_cv_ncurses_h" >&5 echo "${ECHO_T}$cf_cv_ncurses_h" >&6 if test "$cf_cv_ncurses_h" != no ; then cf_cv_ncurses_header=$cf_cv_ncurses_h else -echo "$as_me:16979: checking for $cf_ncuhdr_root include-path" >&5 +echo "$as_me:17007: checking for $cf_ncuhdr_root include-path" >&5 echo $ECHO_N "checking for $cf_ncuhdr_root include-path... $ECHO_C" >&6 if test "${cf_cv_ncurses_h2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17097,7 +17125,7 @@ if test -n "$cf_incdir" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 17100 "configure" +#line 17128 "configure" #include "confdefs.h" #include int @@ -17109,16 +17137,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:17112: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:17140: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:17115: \$? = $ac_status" >&5 + echo "$as_me:17143: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:17118: \"$ac_try\"") >&5 + { (eval echo "$as_me:17146: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17121: \$? = $ac_status" >&5 + echo "$as_me:17149: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -17135,7 +17163,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:17138: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:17166: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -17158,7 +17186,7 @@ fi do cat >"conftest.$ac_ext" <<_ACEOF -#line 17161 "configure" +#line 17189 "configure" #include "confdefs.h" #include <$cf_header> @@ -17182,16 +17210,16 @@ printf("old\\n"); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:17185: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:17213: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:17188: \$? = $ac_status" >&5 + echo "$as_me:17216: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:17191: \"$ac_try\"") >&5 + { (eval echo "$as_me:17219: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17194: \$? = $ac_status" >&5 + echo "$as_me:17222: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_h2=$cf_header @@ -17212,12 +17240,12 @@ rm -f "conftest.$ac_objext" "conftest.$a CPPFLAGS="$cf_save2_CPPFLAGS" test "$cf_cv_ncurses_h2" != no && break done - test "$cf_cv_ncurses_h2" = no && { { echo "$as_me:17215: error: not found" >&5 + test "$cf_cv_ncurses_h2" = no && { { echo "$as_me:17243: error: not found" >&5 echo "$as_me: error: not found" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:17220: result: $cf_cv_ncurses_h2" >&5 +echo "$as_me:17248: result: $cf_cv_ncurses_h2" >&5 echo "${ECHO_T}$cf_cv_ncurses_h2" >&6 cf_1st_incdir=`echo "$cf_cv_ncurses_h2" | sed -e 's%/[^/]*$%%'` @@ -17253,7 +17281,7 @@ if test -n "$cf_1st_incdir" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 17256 "configure" +#line 17284 "configure" #include "confdefs.h" #include int @@ -17265,16 +17293,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:17268: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:17296: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:17271: \$? = $ac_status" >&5 + echo "$as_me:17299: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:17274: \"$ac_try\"") >&5 + { (eval echo "$as_me:17302: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17277: \$? = $ac_status" >&5 + echo "$as_me:17305: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -17291,7 +17319,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:17294: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:17322: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -17339,7 +17367,7 @@ EOF ;; esac -echo "$as_me:17342: checking for terminfo header" >&5 +echo "$as_me:17370: checking for terminfo header" >&5 echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17357,7 +17385,7 @@ esac for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h" do cat >"conftest.$ac_ext" <<_ACEOF -#line 17360 "configure" +#line 17388 "configure" #include "confdefs.h" #include #include <${cf_cv_ncurses_header:-curses.h}> @@ -17372,16 +17400,16 @@ int x = auto_left_margin; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:17375: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:17403: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:17378: \$? = $ac_status" >&5 + echo "$as_me:17406: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:17381: \"$ac_try\"") >&5 + { (eval echo "$as_me:17409: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17384: \$? = $ac_status" >&5 + echo "$as_me:17412: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header="$cf_test" @@ -17397,7 +17425,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:17400: result: $cf_cv_term_header" >&5 +echo "$as_me:17428: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 # Set definitions to allow ifdef'ing to accommodate subdirectories @@ -17435,7 +17463,7 @@ cat >>confdefs.h <<\EOF #define NCURSES 1 EOF -echo "$as_me:17438: checking for ncurses version" >&5 +echo "$as_me:17466: checking for ncurses version" >&5 echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6 if test "${cf_cv_ncurses_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17461,10 +17489,10 @@ Autoconf "old" #endif EOF cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out" - { (eval echo "$as_me:17464: \"$cf_try\"") >&5 + { (eval echo "$as_me:17492: \"$cf_try\"") >&5 (eval $cf_try) 2>&5 ac_status=$? - echo "$as_me:17467: \$? = $ac_status" >&5 + echo "$as_me:17495: \$? = $ac_status" >&5 (exit "$ac_status"); } if test -f conftest.out ; then cf_out=`sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%' conftest.out` @@ -17474,7 +17502,7 @@ EOF else cat >"conftest.$ac_ext" <<_ACEOF -#line 17477 "configure" +#line 17505 "configure" #include "confdefs.h" $ac_includes_default @@ -17501,15 +17529,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:17504: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17532: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17507: \$? = $ac_status" >&5 + echo "$as_me:17535: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:17509: \"$ac_try\"") >&5 + { (eval echo "$as_me:17537: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17512: \$? = $ac_status" >&5 + echo "$as_me:17540: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_version=`cat $cf_tempfile` @@ -17523,7 +17551,7 @@ fi rm -f "$cf_tempfile" fi -echo "$as_me:17526: result: $cf_cv_ncurses_version" >&5 +echo "$as_me:17554: result: $cf_cv_ncurses_version" >&5 echo "${ECHO_T}$cf_cv_ncurses_version" >&6 test "$cf_cv_ncurses_version" = no || cat >>confdefs.h <<\EOF @@ -17536,7 +17564,7 @@ cf_nculib_root=ncursesw # to link gpm. cf_ncurses_LIBS="" cf_ncurses_SAVE="$LIBS" -echo "$as_me:17539: checking for Gpm_Open in -lgpm" >&5 +echo "$as_me:17567: checking for Gpm_Open in -lgpm" >&5 echo $ECHO_N "checking for Gpm_Open in -lgpm... $ECHO_C" >&6 if test "${ac_cv_lib_gpm_Gpm_Open+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17544,7 +17572,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgpm $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 17547 "configure" +#line 17575 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -17563,16 +17591,16 @@ Gpm_Open (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17566: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17594: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17569: \$? = $ac_status" >&5 + echo "$as_me:17597: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17572: \"$ac_try\"") >&5 + { (eval echo "$as_me:17600: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17575: \$? = $ac_status" >&5 + echo "$as_me:17603: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gpm_Gpm_Open=yes else @@ -17583,10 +17611,10 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:17586: result: $ac_cv_lib_gpm_Gpm_Open" >&5 +echo "$as_me:17614: result: $ac_cv_lib_gpm_Gpm_Open" >&5 echo "${ECHO_T}$ac_cv_lib_gpm_Gpm_Open" >&6 if test "$ac_cv_lib_gpm_Gpm_Open" = yes; then - echo "$as_me:17589: checking for initscr in -lgpm" >&5 + echo "$as_me:17617: checking for initscr in -lgpm" >&5 echo $ECHO_N "checking for initscr in -lgpm... $ECHO_C" >&6 if test "${ac_cv_lib_gpm_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17594,7 +17622,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgpm $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 17597 "configure" +#line 17625 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -17613,16 +17641,16 @@ initscr (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17616: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17644: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17619: \$? = $ac_status" >&5 + echo "$as_me:17647: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17622: \"$ac_try\"") >&5 + { (eval echo "$as_me:17650: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17625: \$? = $ac_status" >&5 + echo "$as_me:17653: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gpm_initscr=yes else @@ -17633,7 +17661,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:17636: result: $ac_cv_lib_gpm_initscr" >&5 +echo "$as_me:17664: result: $ac_cv_lib_gpm_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_gpm_initscr" >&6 if test "$ac_cv_lib_gpm_initscr" = yes; then LIBS="$cf_ncurses_SAVE" @@ -17648,7 +17676,7 @@ freebsd*) # This is only necessary if you are linking against an obsolete # version of ncurses (but it should do no harm, since it is static). if test "$cf_nculib_root" = ncurses ; then - echo "$as_me:17651: checking for tgoto in -lmytinfo" >&5 + echo "$as_me:17679: checking for tgoto in -lmytinfo" >&5 echo $ECHO_N "checking for tgoto in -lmytinfo... $ECHO_C" >&6 if test "${ac_cv_lib_mytinfo_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -17656,7 +17684,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lmytinfo $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 17659 "configure" +#line 17687 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -17675,16 +17703,16 @@ tgoto (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17678: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17706: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17681: \$? = $ac_status" >&5 + echo "$as_me:17709: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17684: \"$ac_try\"") >&5 + { (eval echo "$as_me:17712: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17687: \$? = $ac_status" >&5 + echo "$as_me:17715: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_mytinfo_tgoto=yes else @@ -17695,7 +17723,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:17698: result: $ac_cv_lib_mytinfo_tgoto" >&5 +echo "$as_me:17726: result: $ac_cv_lib_mytinfo_tgoto" >&5 echo "${ECHO_T}$ac_cv_lib_mytinfo_tgoto" >&6 if test "$ac_cv_lib_mytinfo_tgoto" = yes; then cf_ncurses_LIBS="-lmytinfo $cf_ncurses_LIBS" @@ -17744,13 +17772,13 @@ else eval 'cf_cv_have_lib_'"$cf_nculib_root"'=no' cf_libdir="" - echo "$as_me:17747: checking for initscr" >&5 + echo "$as_me:17775: checking for initscr" >&5 echo $ECHO_N "checking for initscr... $ECHO_C" >&6 if test "${ac_cv_func_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 17753 "configure" +#line 17781 "configure" #include "confdefs.h" #define initscr autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -17781,16 +17809,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17784: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17812: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17787: \$? = $ac_status" >&5 + echo "$as_me:17815: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17790: \"$ac_try\"") >&5 + { (eval echo "$as_me:17818: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17793: \$? = $ac_status" >&5 + echo "$as_me:17821: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_initscr=yes else @@ -17800,18 +17828,18 @@ ac_cv_func_initscr=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:17803: result: $ac_cv_func_initscr" >&5 +echo "$as_me:17831: result: $ac_cv_func_initscr" >&5 echo "${ECHO_T}$ac_cv_func_initscr" >&6 if test "$ac_cv_func_initscr" = yes; then eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' else cf_save_LIBS="$LIBS" - echo "$as_me:17810: checking for initscr in -l$cf_nculib_root" >&5 + echo "$as_me:17838: checking for initscr in -l$cf_nculib_root" >&5 echo $ECHO_N "checking for initscr in -l$cf_nculib_root... $ECHO_C" >&6 LIBS="-l$cf_nculib_root $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 17814 "configure" +#line 17842 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -17823,25 +17851,25 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17826: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17854: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17829: \$? = $ac_status" >&5 + echo "$as_me:17857: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17832: \"$ac_try\"") >&5 + { (eval echo "$as_me:17860: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17835: \$? = $ac_status" >&5 + echo "$as_me:17863: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:17837: result: yes" >&5 + echo "$as_me:17865: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:17844: result: no" >&5 +echo "$as_me:17872: result: no" >&5 echo "${ECHO_T}no" >&6 cf_search= @@ -17909,11 +17937,11 @@ cf_search="$cf_library_path_list $cf_sea for cf_libdir in $cf_search do - echo "$as_me:17912: checking for -l$cf_nculib_root in $cf_libdir" >&5 + echo "$as_me:17940: checking for -l$cf_nculib_root in $cf_libdir" >&5 echo $ECHO_N "checking for -l$cf_nculib_root in $cf_libdir... $ECHO_C" >&6 LIBS="-L$cf_libdir -l$cf_nculib_root $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 17916 "configure" +#line 17944 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -17925,25 +17953,25 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17928: \"$ac_link\"") >&5 +if { (eval echo "$as_me:17956: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17931: \$? = $ac_status" >&5 + echo "$as_me:17959: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17934: \"$ac_try\"") >&5 + { (eval echo "$as_me:17962: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:17937: \$? = $ac_status" >&5 + echo "$as_me:17965: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:17939: result: yes" >&5 + echo "$as_me:17967: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_nculib_root"'=yes' break else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:17946: result: no" >&5 +echo "$as_me:17974: result: no" >&5 echo "${ECHO_T}no" >&6 LIBS="$cf_save_LIBS" fi @@ -17958,7 +17986,7 @@ fi eval 'cf_found_library="$cf_cv_have_lib_'"$cf_nculib_root"\" if test "$cf_found_library" = no ; then - { { echo "$as_me:17961: error: Cannot link $cf_nculib_root library" >&5 + { { echo "$as_me:17989: error: Cannot link $cf_nculib_root library" >&5 echo "$as_me: error: Cannot link $cf_nculib_root library" >&2;} { (exit 1); exit 1; }; } fi @@ -17966,7 +17994,7 @@ fi fi if test -n "$cf_ncurses_LIBS" ; then - echo "$as_me:17969: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5 + echo "$as_me:17997: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5 echo $ECHO_N "checking if we can link $cf_nculib_root without $cf_ncurses_LIBS... $ECHO_C" >&6 cf_ncurses_SAVE="$LIBS" for p in $cf_ncurses_LIBS ; do @@ -17976,7 +18004,7 @@ echo $ECHO_N "checking if we can link $c fi done cat >"conftest.$ac_ext" <<_ACEOF -#line 17979 "configure" +#line 18007 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -17988,23 +18016,23 @@ initscr(); mousemask(0,0); tigetstr((cha } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:17991: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18019: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:17994: \$? = $ac_status" >&5 + echo "$as_me:18022: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:17997: \"$ac_try\"") >&5 + { (eval echo "$as_me:18025: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18000: \$? = $ac_status" >&5 + echo "$as_me:18028: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:18002: result: yes" >&5 + echo "$as_me:18030: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:18007: result: no" >&5 +echo "$as_me:18035: result: no" >&5 echo "${ECHO_T}no" >&6 LIBS="$cf_ncurses_SAVE" fi @@ -18022,7 +18050,7 @@ else NCURSES_CONFIG=none fi -echo "$as_me:18025: checking definition to turn on extended curses functions" >&5 +echo "$as_me:18053: checking definition to turn on extended curses functions" >&5 echo $ECHO_N "checking definition to turn on extended curses functions... $ECHO_C" >&6 if test "${cf_cv_need_xopen_extension+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18030,7 +18058,7 @@ else cf_cv_need_xopen_extension=unknown cat >"conftest.$ac_ext" <<_ACEOF -#line 18033 "configure" +#line 18061 "configure" #include "confdefs.h" $ac_includes_default @@ -18063,16 +18091,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18066: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18094: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18069: \$? = $ac_status" >&5 + echo "$as_me:18097: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18072: \"$ac_try\"") >&5 + { (eval echo "$as_me:18100: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18075: \$? = $ac_status" >&5 + echo "$as_me:18103: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_need_xopen_extension=none else @@ -18082,7 +18110,7 @@ cat "conftest.$ac_ext" >&5 for cf_try_xopen_extension in _XOPEN_SOURCE_EXTENDED NCURSES_WIDECHAR do cat >"conftest.$ac_ext" <<_ACEOF -#line 18085 "configure" +#line 18113 "configure" #include "confdefs.h" #define $cf_try_xopen_extension 1 @@ -18108,16 +18136,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18111: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18139: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18114: \$? = $ac_status" >&5 + echo "$as_me:18142: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18117: \"$ac_try\"") >&5 + { (eval echo "$as_me:18145: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18120: \$? = $ac_status" >&5 + echo "$as_me:18148: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_need_xopen_extension=$cf_try_xopen_extension; break else @@ -18131,7 +18159,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:18134: result: $cf_cv_need_xopen_extension" >&5 +echo "$as_me:18162: result: $cf_cv_need_xopen_extension" >&5 echo "${ECHO_T}$cf_cv_need_xopen_extension" >&6 case "$cf_cv_need_xopen_extension" in @@ -18143,13 +18171,13 @@ case "$cf_cv_need_xopen_extension" in ;; esac - test "$cf_cv_need_xopen_extension" = unknown && { { echo "$as_me:18146: error: X/Open curses not found" >&5 + test "$cf_cv_need_xopen_extension" = unknown && { { echo "$as_me:18174: error: X/Open curses not found" >&5 echo "$as_me: error: X/Open curses not found" >&2;} { (exit 1); exit 1; }; } ;; curses) #(vi -echo "$as_me:18152: checking for extra include directories" >&5 +echo "$as_me:18180: checking for extra include directories" >&5 echo $ECHO_N "checking for extra include directories... $ECHO_C" >&6 if test "${cf_cv_curses_incdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18175,7 +18203,7 @@ sunos3*|sunos4*) esac fi -echo "$as_me:18178: result: $cf_cv_curses_incdir" >&5 +echo "$as_me:18206: result: $cf_cv_curses_incdir" >&5 echo "${ECHO_T}$cf_cv_curses_incdir" >&6 if test "$cf_cv_curses_incdir" != no then @@ -18185,7 +18213,7 @@ then fi -echo "$as_me:18188: checking if we have identified curses headers" >&5 +echo "$as_me:18216: checking if we have identified curses headers" >&5 echo $ECHO_N "checking if we have identified curses headers... $ECHO_C" >&6 if test "${cf_cv_ncurses_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18197,7 +18225,7 @@ for cf_header in \ curses.h ncurses/ncurses.h ncurses/curses.h do cat >"conftest.$ac_ext" <<_ACEOF -#line 18200 "configure" +#line 18228 "configure" #include "confdefs.h" #include <${cf_header}> int @@ -18209,16 +18237,16 @@ initscr(); endwin() } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:18212: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:18240: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:18215: \$? = $ac_status" >&5 + echo "$as_me:18243: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:18218: \"$ac_try\"") >&5 + { (eval echo "$as_me:18246: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18221: \$? = $ac_status" >&5 + echo "$as_me:18249: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_header=$cf_header; break else @@ -18229,11 +18257,11 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:18232: result: $cf_cv_ncurses_header" >&5 +echo "$as_me:18260: result: $cf_cv_ncurses_header" >&5 echo "${ECHO_T}$cf_cv_ncurses_header" >&6 if test "$cf_cv_ncurses_header" = none ; then - { { echo "$as_me:18236: error: No curses header-files found" >&5 + { { echo "$as_me:18264: error: No curses header-files found" >&5 echo "$as_me: error: No curses header-files found" >&2;} { (exit 1); exit 1; }; } fi @@ -18243,23 +18271,23 @@ fi for ac_header in $cf_cv_ncurses_header do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:18246: checking for $ac_header" >&5 +echo "$as_me:18274: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 18252 "configure" +#line 18280 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:18256: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:18284: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:18262: \$? = $ac_status" >&5 + echo "$as_me:18290: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -18278,7 +18306,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:18281: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:18309: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:18319: checking for terminfo header" >&5 echo $ECHO_N "checking for terminfo header... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18306,7 +18334,7 @@ esac for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h" do cat >"conftest.$ac_ext" <<_ACEOF -#line 18309 "configure" +#line 18337 "configure" #include "confdefs.h" #include #include <${cf_cv_ncurses_header:-curses.h}> @@ -18321,16 +18349,16 @@ int x = auto_left_margin; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:18324: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:18352: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:18327: \$? = $ac_status" >&5 + echo "$as_me:18355: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:18330: \"$ac_try\"") >&5 + { (eval echo "$as_me:18358: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18333: \$? = $ac_status" >&5 + echo "$as_me:18361: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header="$cf_test" @@ -18346,7 +18374,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:18349: result: $cf_cv_term_header" >&5 +echo "$as_me:18377: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 # Set definitions to allow ifdef'ing to accommodate subdirectories @@ -18378,7 +18406,7 @@ EOF ;; esac -echo "$as_me:18381: checking for ncurses version" >&5 +echo "$as_me:18409: checking for ncurses version" >&5 echo $ECHO_N "checking for ncurses version... $ECHO_C" >&6 if test "${cf_cv_ncurses_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18404,10 +18432,10 @@ Autoconf "old" #endif EOF cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out" - { (eval echo "$as_me:18407: \"$cf_try\"") >&5 + { (eval echo "$as_me:18435: \"$cf_try\"") >&5 (eval $cf_try) 2>&5 ac_status=$? - echo "$as_me:18410: \$? = $ac_status" >&5 + echo "$as_me:18438: \$? = $ac_status" >&5 (exit "$ac_status"); } if test -f conftest.out ; then cf_out=`sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%' conftest.out` @@ -18417,7 +18445,7 @@ EOF else cat >"conftest.$ac_ext" <<_ACEOF -#line 18420 "configure" +#line 18448 "configure" #include "confdefs.h" $ac_includes_default @@ -18444,15 +18472,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:18447: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18475: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18450: \$? = $ac_status" >&5 + echo "$as_me:18478: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:18452: \"$ac_try\"") >&5 + { (eval echo "$as_me:18480: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18455: \$? = $ac_status" >&5 + echo "$as_me:18483: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_version=`cat $cf_tempfile` @@ -18466,17 +18494,17 @@ fi rm -f "$cf_tempfile" fi -echo "$as_me:18469: result: $cf_cv_ncurses_version" >&5 +echo "$as_me:18497: result: $cf_cv_ncurses_version" >&5 echo "${ECHO_T}$cf_cv_ncurses_version" >&6 test "$cf_cv_ncurses_version" = no || cat >>confdefs.h <<\EOF #define NCURSES 1 EOF -echo "$as_me:18476: checking if we have identified curses libraries" >&5 +echo "$as_me:18504: checking if we have identified curses libraries" >&5 echo $ECHO_N "checking if we have identified curses libraries... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 18479 "configure" +#line 18507 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -18488,16 +18516,16 @@ initscr(); endwin() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18491: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18519: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18494: \$? = $ac_status" >&5 + echo "$as_me:18522: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18497: \"$ac_try\"") >&5 + { (eval echo "$as_me:18525: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18500: \$? = $ac_status" >&5 + echo "$as_me:18528: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -18506,13 +18534,13 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" -echo "$as_me:18509: result: $cf_result" >&5 +echo "$as_me:18537: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 if test "$cf_result" = no ; then case "$host_os" in freebsd*) - echo "$as_me:18515: checking for tgoto in -lmytinfo" >&5 + echo "$as_me:18543: checking for tgoto in -lmytinfo" >&5 echo $ECHO_N "checking for tgoto in -lmytinfo... $ECHO_C" >&6 if test "${ac_cv_lib_mytinfo_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18520,7 +18548,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lmytinfo $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 18523 "configure" +#line 18551 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -18539,16 +18567,16 @@ tgoto (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18542: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18570: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18545: \$? = $ac_status" >&5 + echo "$as_me:18573: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18548: \"$ac_try\"") >&5 + { (eval echo "$as_me:18576: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18551: \$? = $ac_status" >&5 + echo "$as_me:18579: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_mytinfo_tgoto=yes else @@ -18559,7 +18587,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:18562: result: $ac_cv_lib_mytinfo_tgoto" >&5 +echo "$as_me:18590: result: $ac_cv_lib_mytinfo_tgoto" >&5 echo "${ECHO_T}$ac_cv_lib_mytinfo_tgoto" >&6 if test "$ac_cv_lib_mytinfo_tgoto" = yes; then @@ -18589,7 +18617,7 @@ hpux10.*) # term.h) for cur_colr if test "x$cf_cv_screen" = "xcurses_colr" then - echo "$as_me:18592: checking for initscr in -lcur_colr" >&5 + echo "$as_me:18620: checking for initscr in -lcur_colr" >&5 echo $ECHO_N "checking for initscr in -lcur_colr... $ECHO_C" >&6 if test "${ac_cv_lib_cur_colr_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18597,7 +18625,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lcur_colr $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 18600 "configure" +#line 18628 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -18616,16 +18644,16 @@ initscr (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18619: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18647: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18622: \$? = $ac_status" >&5 + echo "$as_me:18650: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18625: \"$ac_try\"") >&5 + { (eval echo "$as_me:18653: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18628: \$? = $ac_status" >&5 + echo "$as_me:18656: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_cur_colr_initscr=yes else @@ -18636,7 +18664,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:18639: result: $ac_cv_lib_cur_colr_initscr" >&5 +echo "$as_me:18667: result: $ac_cv_lib_cur_colr_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_cur_colr_initscr" >&6 if test "$ac_cv_lib_cur_colr_initscr" = yes; then @@ -18660,7 +18688,7 @@ LIBS="$cf_add_libs" else - echo "$as_me:18663: checking for initscr in -lHcurses" >&5 + echo "$as_me:18691: checking for initscr in -lHcurses" >&5 echo $ECHO_N "checking for initscr in -lHcurses... $ECHO_C" >&6 if test "${ac_cv_lib_Hcurses_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18668,7 +18696,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lHcurses $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 18671 "configure" +#line 18699 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -18687,16 +18715,16 @@ initscr (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18690: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18718: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18693: \$? = $ac_status" >&5 + echo "$as_me:18721: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18696: \"$ac_try\"") >&5 + { (eval echo "$as_me:18724: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18699: \$? = $ac_status" >&5 + echo "$as_me:18727: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_Hcurses_initscr=yes else @@ -18707,7 +18735,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:18710: result: $ac_cv_lib_Hcurses_initscr" >&5 +echo "$as_me:18738: result: $ac_cv_lib_Hcurses_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_Hcurses_initscr" >&6 if test "$ac_cv_lib_Hcurses_initscr" = yes; then @@ -18765,7 +18793,7 @@ if test -n "/lib64" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:18768: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:18796: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -18794,7 +18822,7 @@ if test -n "/lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:18797: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:18825: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -18825,7 +18853,7 @@ if test -n "/lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:18828: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:18856: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -18860,7 +18888,7 @@ if test -n "/usr/5lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:18863: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:18891: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -18904,13 +18932,13 @@ if test ".$ac_cv_func_initscr" != .yes ; # because it may be needed to link the test-case for initscr. if test "x$cf_term_lib" = x then - echo "$as_me:18907: checking for tgoto" >&5 + echo "$as_me:18935: checking for tgoto" >&5 echo $ECHO_N "checking for tgoto... $ECHO_C" >&6 if test "${ac_cv_func_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 18913 "configure" +#line 18941 "configure" #include "confdefs.h" #define tgoto autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -18941,16 +18969,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18944: \"$ac_link\"") >&5 +if { (eval echo "$as_me:18972: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:18947: \$? = $ac_status" >&5 + echo "$as_me:18975: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:18950: \"$ac_try\"") >&5 + { (eval echo "$as_me:18978: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:18953: \$? = $ac_status" >&5 + echo "$as_me:18981: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_tgoto=yes else @@ -18960,7 +18988,7 @@ ac_cv_func_tgoto=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:18963: result: $ac_cv_func_tgoto" >&5 +echo "$as_me:18991: result: $ac_cv_func_tgoto" >&5 echo "${ECHO_T}$ac_cv_func_tgoto" >&6 if test "$ac_cv_func_tgoto" = yes; then cf_term_lib=predefined @@ -18969,7 +18997,7 @@ else for cf_term_lib in $cf_check_list otermcap termcap tinfo termlib unknown do as_ac_Lib=`echo "ac_cv_lib_$cf_term_lib''_tgoto" | $as_tr_sh` -echo "$as_me:18972: checking for tgoto in -l$cf_term_lib" >&5 +echo "$as_me:19000: checking for tgoto in -l$cf_term_lib" >&5 echo $ECHO_N "checking for tgoto in -l$cf_term_lib... $ECHO_C" >&6 if eval "test \"\${$as_ac_Lib+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -18977,7 +19005,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-l$cf_term_lib $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 18980 "configure" +#line 19008 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -18996,16 +19024,16 @@ tgoto (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:18999: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19027: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19002: \$? = $ac_status" >&5 + echo "$as_me:19030: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19005: \"$ac_try\"") >&5 + { (eval echo "$as_me:19033: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19008: \$? = $ac_status" >&5 + echo "$as_me:19036: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_Lib=yes" else @@ -19016,7 +19044,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:19019: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 +echo "$as_me:19047: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Lib"'}'`" >&6 if test "`eval echo '${'"$as_ac_Lib"'}'`" = yes; then @@ -19039,10 +19067,10 @@ fi do LIBS="-l$cf_curs_lib $cf_save_LIBS" if test "$cf_term_lib" = unknown || test "$cf_term_lib" = "$cf_curs_lib" ; then - echo "$as_me:19042: checking if we can link with $cf_curs_lib library" >&5 + echo "$as_me:19070: checking if we can link with $cf_curs_lib library" >&5 echo $ECHO_N "checking if we can link with $cf_curs_lib library... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 19045 "configure" +#line 19073 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -19054,16 +19082,16 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19057: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19085: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19060: \$? = $ac_status" >&5 + echo "$as_me:19088: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19063: \"$ac_try\"") >&5 + { (eval echo "$as_me:19091: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19066: \$? = $ac_status" >&5 + echo "$as_me:19094: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -19072,16 +19100,16 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:19075: result: $cf_result" >&5 + echo "$as_me:19103: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test "$cf_result" = yes && break elif test "$cf_curs_lib" = "$cf_term_lib" ; then cf_result=no elif test "$cf_term_lib" != predefined ; then - echo "$as_me:19081: checking if we need both $cf_curs_lib and $cf_term_lib libraries" >&5 + echo "$as_me:19109: checking if we need both $cf_curs_lib and $cf_term_lib libraries" >&5 echo $ECHO_N "checking if we need both $cf_curs_lib and $cf_term_lib libraries... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 19084 "configure" +#line 19112 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -19093,16 +19121,16 @@ initscr(); endwin(); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19096: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19124: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19099: \$? = $ac_status" >&5 + echo "$as_me:19127: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19102: \"$ac_try\"") >&5 + { (eval echo "$as_me:19130: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19105: \$? = $ac_status" >&5 + echo "$as_me:19133: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=no else @@ -19111,7 +19139,7 @@ cat "conftest.$ac_ext" >&5 LIBS="-l$cf_curs_lib -l$cf_term_lib $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 19114 "configure" +#line 19142 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> int @@ -19123,16 +19151,16 @@ initscr() } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19126: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19154: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19129: \$? = $ac_status" >&5 + echo "$as_me:19157: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19132: \"$ac_try\"") >&5 + { (eval echo "$as_me:19160: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19135: \$? = $ac_status" >&5 + echo "$as_me:19163: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -19144,19 +19172,19 @@ rm -f "conftest.$ac_objext" "conftest$ac fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:19147: result: $cf_result" >&5 + echo "$as_me:19175: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test "$cf_result" != error && break fi done fi - test "$cf_curs_lib" = unknown && { { echo "$as_me:19153: error: no curses library found" >&5 + test "$cf_curs_lib" = unknown && { { echo "$as_me:19181: error: no curses library found" >&5 echo "$as_me: error: no curses library found" >&2;} { (exit 1); exit 1; }; } fi fi -echo "$as_me:19159: checking definition to turn on extended curses functions" >&5 +echo "$as_me:19187: checking definition to turn on extended curses functions" >&5 echo $ECHO_N "checking definition to turn on extended curses functions... $ECHO_C" >&6 if test "${cf_cv_need_xopen_extension+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19164,7 +19192,7 @@ else cf_cv_need_xopen_extension=unknown cat >"conftest.$ac_ext" <<_ACEOF -#line 19167 "configure" +#line 19195 "configure" #include "confdefs.h" $ac_includes_default @@ -19197,16 +19225,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19200: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19228: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19203: \$? = $ac_status" >&5 + echo "$as_me:19231: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19206: \"$ac_try\"") >&5 + { (eval echo "$as_me:19234: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19209: \$? = $ac_status" >&5 + echo "$as_me:19237: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_need_xopen_extension=none else @@ -19216,7 +19244,7 @@ cat "conftest.$ac_ext" >&5 for cf_try_xopen_extension in _XOPEN_SOURCE_EXTENDED NCURSES_WIDECHAR do cat >"conftest.$ac_ext" <<_ACEOF -#line 19219 "configure" +#line 19247 "configure" #include "confdefs.h" #define $cf_try_xopen_extension 1 @@ -19242,16 +19270,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19245: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19273: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19248: \$? = $ac_status" >&5 + echo "$as_me:19276: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19251: \"$ac_try\"") >&5 + { (eval echo "$as_me:19279: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19254: \$? = $ac_status" >&5 + echo "$as_me:19282: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_need_xopen_extension=$cf_try_xopen_extension; break else @@ -19265,7 +19293,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:19268: result: $cf_cv_need_xopen_extension" >&5 +echo "$as_me:19296: result: $cf_cv_need_xopen_extension" >&5 echo "${ECHO_T}$cf_cv_need_xopen_extension" >&6 case "$cf_cv_need_xopen_extension" in @@ -19282,7 +19310,7 @@ esac fi ## substitute externally-installed PCRE library for our bundled version -echo "$as_me:19285: checking if you want to use installed version of pcre" >&5 +echo "$as_me:19313: checking if you want to use installed version of pcre" >&5 echo $ECHO_N "checking if you want to use installed version of pcre... $ECHO_C" >&6 # Check whether --with-pcre or --without-pcre was given. @@ -19292,11 +19320,11 @@ if test "${with_pcre+set}" = set; then else PCRE_HOME=no fi; -echo "$as_me:19295: result: $PCRE_HOME" >&5 +echo "$as_me:19323: result: $PCRE_HOME" >&5 echo "${ECHO_T}$PCRE_HOME" >&6 ## Preliminary check for PCRE2 -echo "$as_me:19299: checking if you want to use pcre2 in favour of pcre" >&5 +echo "$as_me:19327: checking if you want to use pcre2 in favour of pcre" >&5 echo $ECHO_N "checking if you want to use pcre2 in favour of pcre... $ECHO_C" >&6 # Check whether --with-pcre2-config or --without-pcre2-config was given. @@ -19306,7 +19334,7 @@ if test "${with_pcre2_config+set}" = set else pcre2_config=no fi; -echo "$as_me:19309: result: $pcre2_config" >&5 +echo "$as_me:19337: result: $pcre2_config" >&5 echo "${ECHO_T}$pcre2_config" >&6 if test "$pcre2_config" != no ; then @@ -19317,7 +19345,7 @@ if test "$pcre2_config" != no ; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pcre2-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pcre2-config; ac_word=$2 -echo "$as_me:19320: checking for $ac_word" >&5 +echo "$as_me:19348: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_PCRE2_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19334,7 +19362,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if $as_executable_p "$ac_dir/$ac_word"; then ac_cv_path_PCRE2_CONFIG="$ac_dir/$ac_word" - echo "$as_me:19337: found $ac_dir/$ac_word" >&5 + echo "$as_me:19365: found $ac_dir/$ac_word" >&5 break fi done @@ -19345,10 +19373,10 @@ fi PCRE2_CONFIG=$ac_cv_path_PCRE2_CONFIG if test -n "$PCRE2_CONFIG"; then - echo "$as_me:19348: result: $PCRE2_CONFIG" >&5 + echo "$as_me:19376: result: $PCRE2_CONFIG" >&5 echo "${ECHO_T}$PCRE2_CONFIG" >&6 else - echo "$as_me:19351: result: no" >&5 + echo "$as_me:19379: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -19357,7 +19385,7 @@ if test -z "$ac_cv_path_PCRE2_CONFIG"; t ac_pt_PCRE2_CONFIG=$PCRE2_CONFIG # Extract the first word of "pcre2-config", so it can be a program name with args. set dummy pcre2-config; ac_word=$2 -echo "$as_me:19360: checking for $ac_word" >&5 +echo "$as_me:19388: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_ac_pt_PCRE2_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19374,7 +19402,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if $as_executable_p "$ac_dir/$ac_word"; then ac_cv_path_ac_pt_PCRE2_CONFIG="$ac_dir/$ac_word" - echo "$as_me:19377: found $ac_dir/$ac_word" >&5 + echo "$as_me:19405: found $ac_dir/$ac_word" >&5 break fi done @@ -19386,10 +19414,10 @@ fi ac_pt_PCRE2_CONFIG=$ac_cv_path_ac_pt_PCRE2_CONFIG if test -n "$ac_pt_PCRE2_CONFIG"; then - echo "$as_me:19389: result: $ac_pt_PCRE2_CONFIG" >&5 + echo "$as_me:19417: result: $ac_pt_PCRE2_CONFIG" >&5 echo "${ECHO_T}$ac_pt_PCRE2_CONFIG" >&6 else - echo "$as_me:19392: result: no" >&5 + echo "$as_me:19420: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -19416,7 +19444,7 @@ EOF # TODO: header / link checks? else - { echo "$as_me:19419: WARNING: pcre2-config not found or not working, trying fallback to pcre" >&5 + { echo "$as_me:19447: WARNING: pcre2-config not found or not working, trying fallback to pcre" >&5 echo "$as_me: WARNING: pcre2-config not found or not working, trying fallback to pcre" >&2;} pcre2_config=no fi @@ -19445,17 +19473,31 @@ cf_find_PCRE=yes if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libpcre2"; then test -n "$verbose" && echo " found package libpcre2" 1>&6 -echo "${as_me:-configure}:19448: testing found package libpcre2 ..." 1>&5 +echo "${as_me:-configure}:19476: testing found package libpcre2 ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libpcre2" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libpcre2" 2>/dev/null`" test -n "$verbose" && echo " package libpcre2 CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:19454: testing package libpcre2 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:19482: testing package libpcre2 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libpcre2 LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:19458: testing package libpcre2 LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:19486: testing package libpcre2 LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libpcre2 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -19579,17 +19621,31 @@ else if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libpcre"; then test -n "$verbose" && echo " found package libpcre" 1>&6 -echo "${as_me:-configure}:19582: testing found package libpcre ..." 1>&5 +echo "${as_me:-configure}:19624: testing found package libpcre ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libpcre" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libpcre" 2>/dev/null`" test -n "$verbose" && echo " package libpcre CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:19588: testing package libpcre CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:19630: testing package libpcre CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libpcre LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:19592: testing package libpcre LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:19634: testing package libpcre LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libpcre +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -19710,7 +19766,7 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= - echo "$as_me:19713: checking for pcre_compile in -lpcre" >&5 + echo "$as_me:19769: checking for pcre_compile in -lpcre" >&5 echo $ECHO_N "checking for pcre_compile in -lpcre... $ECHO_C" >&6 if test "${ac_cv_lib_pcre_pcre_compile+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19718,7 +19774,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lpcre $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 19721 "configure" +#line 19777 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -19737,16 +19793,16 @@ pcre_compile (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19740: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19796: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19743: \$? = $ac_status" >&5 + echo "$as_me:19799: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19746: \"$ac_try\"") >&5 + { (eval echo "$as_me:19802: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19749: \$? = $ac_status" >&5 + echo "$as_me:19805: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_pcre_pcre_compile=yes else @@ -19757,7 +19813,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:19760: result: $ac_cv_lib_pcre_pcre_compile" >&5 +echo "$as_me:19816: result: $ac_cv_lib_pcre_pcre_compile" >&5 echo "${ECHO_T}$ac_cv_lib_pcre_pcre_compile" >&6 if test "$ac_cv_lib_pcre_pcre_compile" = yes; then @@ -19777,7 +19833,7 @@ for cf_add_1lib in $cf_add_0lib; do done LIBS="$cf_add_libs" - echo "$as_me:19780: checking for regcomp in -lpcre2-posix" >&5 + echo "$as_me:19836: checking for regcomp in -lpcre2-posix" >&5 echo $ECHO_N "checking for regcomp in -lpcre2-posix... $ECHO_C" >&6 if test "${ac_cv_lib_pcre2_posix_regcomp+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19785,7 +19841,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lpcre2-posix $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 19788 "configure" +#line 19844 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -19804,16 +19860,16 @@ regcomp (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19807: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19863: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19810: \$? = $ac_status" >&5 + echo "$as_me:19866: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19813: \"$ac_try\"") >&5 + { (eval echo "$as_me:19869: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19816: \$? = $ac_status" >&5 + echo "$as_me:19872: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_pcre2_posix_regcomp=yes else @@ -19824,7 +19880,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:19827: result: $ac_cv_lib_pcre2_posix_regcomp" >&5 +echo "$as_me:19883: result: $ac_cv_lib_pcre2_posix_regcomp" >&5 echo "${ECHO_T}$ac_cv_lib_pcre2_posix_regcomp" >&6 if test "$ac_cv_lib_pcre2_posix_regcomp" = yes; then @@ -19846,7 +19902,7 @@ LIBS="$cf_add_libs" else - echo "$as_me:19849: checking for regcomp in -lpcreposix" >&5 + echo "$as_me:19905: checking for regcomp in -lpcreposix" >&5 echo $ECHO_N "checking for regcomp in -lpcreposix... $ECHO_C" >&6 if test "${ac_cv_lib_pcreposix_regcomp+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -19854,7 +19910,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lpcreposix $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 19857 "configure" +#line 19913 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -19873,16 +19929,16 @@ regcomp (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:19876: \"$ac_link\"") >&5 +if { (eval echo "$as_me:19932: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:19879: \$? = $ac_status" >&5 + echo "$as_me:19935: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:19882: \"$ac_try\"") >&5 + { (eval echo "$as_me:19938: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:19885: \$? = $ac_status" >&5 + echo "$as_me:19941: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_pcreposix_regcomp=yes else @@ -19893,7 +19949,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:19896: result: $ac_cv_lib_pcreposix_regcomp" >&5 +echo "$as_me:19952: result: $ac_cv_lib_pcreposix_regcomp" >&5 echo "${ECHO_T}$ac_cv_lib_pcreposix_regcomp" >&6 if test "$ac_cv_lib_pcreposix_regcomp" = yes; then @@ -19947,7 +20003,7 @@ else test -n "$verbose" && echo " using bundled pcre because no installed pcre was found" 1>&6 -echo "${as_me:-configure}:19950: testing using bundled pcre because no installed pcre was found ..." 1>&5 +echo "${as_me:-configure}:20006: testing using bundled pcre because no installed pcre was found ..." 1>&5 cf_pcre_home=no @@ -19979,7 +20035,7 @@ xno|xNONE/*) cf_pcre_home=`echo "$cf_pcre_home" | sed -e s%NONE%$cf_path_syntax%` ;; *) - { { echo "$as_me:19982: error: expected a pathname, not \"$cf_pcre_home\"" >&5 + { { echo "$as_me:20038: error: expected a pathname, not \"$cf_pcre_home\"" >&5 echo "$as_me: error: expected a pathname, not \"$cf_pcre_home\"" >&2;} { (exit 1); exit 1; }; } ;; @@ -20006,7 +20062,7 @@ fi ## debugging libraries (do this after other libraries) debug_malloc=none -echo "$as_me:20009: checking if you want to use dbmalloc for testing" >&5 +echo "$as_me:20065: checking if you want to use dbmalloc for testing" >&5 echo $ECHO_N "checking if you want to use dbmalloc for testing... $ECHO_C" >&6 # Check whether --with-dbmalloc or --without-dbmalloc was given. @@ -20028,7 +20084,7 @@ EOF else with_dbmalloc= fi; -echo "$as_me:20031: result: ${with_dbmalloc:-no}" >&5 +echo "$as_me:20087: result: ${with_dbmalloc:-no}" >&5 echo "${ECHO_T}${with_dbmalloc:-no}" >&6 case ".$with_cflags" in @@ -20142,23 +20198,23 @@ fi esac if test "$with_dbmalloc" = yes ; then - echo "$as_me:20145: checking for dbmalloc.h" >&5 + echo "$as_me:20201: checking for dbmalloc.h" >&5 echo $ECHO_N "checking for dbmalloc.h... $ECHO_C" >&6 if test "${ac_cv_header_dbmalloc_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 20151 "configure" +#line 20207 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:20155: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:20211: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:20161: \$? = $ac_status" >&5 + echo "$as_me:20217: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -20177,10 +20233,10 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:20180: result: $ac_cv_header_dbmalloc_h" >&5 +echo "$as_me:20236: result: $ac_cv_header_dbmalloc_h" >&5 echo "${ECHO_T}$ac_cv_header_dbmalloc_h" >&6 if test "$ac_cv_header_dbmalloc_h" = yes; then - echo "$as_me:20183: checking for debug_malloc in -ldbmalloc" >&5 + echo "$as_me:20239: checking for debug_malloc in -ldbmalloc" >&5 echo $ECHO_N "checking for debug_malloc in -ldbmalloc... $ECHO_C" >&6 if test "${ac_cv_lib_dbmalloc_debug_malloc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -20188,7 +20244,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-ldbmalloc $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 20191 "configure" +#line 20247 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -20207,16 +20263,16 @@ debug_malloc (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:20210: \"$ac_link\"") >&5 +if { (eval echo "$as_me:20266: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:20213: \$? = $ac_status" >&5 + echo "$as_me:20269: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:20216: \"$ac_try\"") >&5 + { (eval echo "$as_me:20272: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:20219: \$? = $ac_status" >&5 + echo "$as_me:20275: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_dbmalloc_debug_malloc=yes else @@ -20227,7 +20283,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:20230: result: $ac_cv_lib_dbmalloc_debug_malloc" >&5 +echo "$as_me:20286: result: $ac_cv_lib_dbmalloc_debug_malloc" >&5 echo "${ECHO_T}$ac_cv_lib_dbmalloc_debug_malloc" >&6 if test "$ac_cv_lib_dbmalloc_debug_malloc" = yes; then debug_malloc=DBMALLOC @@ -20237,7 +20293,7 @@ fi fi -echo "$as_me:20240: checking if you want to use dmalloc for testing" >&5 +echo "$as_me:20296: checking if you want to use dmalloc for testing" >&5 echo $ECHO_N "checking if you want to use dmalloc for testing... $ECHO_C" >&6 # Check whether --with-dmalloc or --without-dmalloc was given. @@ -20259,7 +20315,7 @@ EOF else with_dmalloc= fi; -echo "$as_me:20262: result: ${with_dmalloc:-no}" >&5 +echo "$as_me:20318: result: ${with_dmalloc:-no}" >&5 echo "${ECHO_T}${with_dmalloc:-no}" >&6 case ".$with_cflags" in @@ -20373,23 +20429,23 @@ fi esac if test "$with_dmalloc" = yes ; then - echo "$as_me:20376: checking for dmalloc.h" >&5 + echo "$as_me:20432: checking for dmalloc.h" >&5 echo $ECHO_N "checking for dmalloc.h... $ECHO_C" >&6 if test "${ac_cv_header_dmalloc_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 20382 "configure" +#line 20438 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:20386: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:20442: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:20392: \$? = $ac_status" >&5 + echo "$as_me:20448: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -20408,10 +20464,10 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:20411: result: $ac_cv_header_dmalloc_h" >&5 +echo "$as_me:20467: result: $ac_cv_header_dmalloc_h" >&5 echo "${ECHO_T}$ac_cv_header_dmalloc_h" >&6 if test "$ac_cv_header_dmalloc_h" = yes; then - echo "$as_me:20414: checking for dmalloc_debug in -ldmalloc" >&5 + echo "$as_me:20470: checking for dmalloc_debug in -ldmalloc" >&5 echo $ECHO_N "checking for dmalloc_debug in -ldmalloc... $ECHO_C" >&6 if test "${ac_cv_lib_dmalloc_dmalloc_debug+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -20419,7 +20475,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-ldmalloc $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 20422 "configure" +#line 20478 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -20438,16 +20494,16 @@ dmalloc_debug (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:20441: \"$ac_link\"") >&5 +if { (eval echo "$as_me:20497: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:20444: \$? = $ac_status" >&5 + echo "$as_me:20500: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:20447: \"$ac_try\"") >&5 + { (eval echo "$as_me:20503: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:20450: \$? = $ac_status" >&5 + echo "$as_me:20506: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_dmalloc_dmalloc_debug=yes else @@ -20458,7 +20514,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:20461: result: $ac_cv_lib_dmalloc_dmalloc_debug" >&5 +echo "$as_me:20517: result: $ac_cv_lib_dmalloc_dmalloc_debug" >&5 echo "${ECHO_T}$ac_cv_lib_dmalloc_dmalloc_debug" >&6 if test "$ac_cv_lib_dmalloc_dmalloc_debug" = yes; then debug_malloc=DMALLOC @@ -20472,13 +20528,13 @@ fi if test "${with_trace+set}" = set; then withval="$with_trace" - echo "$as_me:20475: checking for _tracef" >&5 + echo "$as_me:20531: checking for _tracef" >&5 echo $ECHO_N "checking for _tracef... $ECHO_C" >&6 if test "${ac_cv_func__tracef+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 20481 "configure" +#line 20537 "configure" #include "confdefs.h" #define _tracef autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -20509,16 +20565,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:20512: \"$ac_link\"") >&5 +if { (eval echo "$as_me:20568: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:20515: \$? = $ac_status" >&5 + echo "$as_me:20571: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:20518: \"$ac_try\"") >&5 + { (eval echo "$as_me:20574: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:20521: \$? = $ac_status" >&5 + echo "$as_me:20577: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func__tracef=yes else @@ -20528,7 +20584,7 @@ ac_cv_func__tracef=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:20531: result: $ac_cv_func__tracef" >&5 +echo "$as_me:20587: result: $ac_cv_func__tracef" >&5 echo "${ECHO_T}$ac_cv_func__tracef" >&6 if test "$ac_cv_func__tracef" = yes; then @@ -20539,7 +20595,7 @@ EOF else as_ac_Lib=`echo "ac_cv_lib_${cf_with_screen}_g''__tracef" | $as_tr_sh` -echo "$as_me:20542: checking for _tracef in -l${cf_with_screen}_g" >&5 +echo "$as_me:20598: checking for _tracef in -l${cf_with_screen}_g" >&5 echo $ECHO_N "checking for _tracef in -l${cf_with_screen}_g... $ECHO_C" >&6 if eval "test \"\${$as_ac_Lib+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -20547,7 +20603,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-l${cf_with_screen}_g $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 20550 "configure" +#line 20606 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -20566,16 +20622,16 @@ _tracef (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:20569: \"$ac_link\"") >&5 +if { (eval echo "$as_me:20625: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:20572: \$? = $ac_status" >&5 + echo "$as_me:20628: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:20575: \"$ac_try\"") >&5 + { (eval echo "$as_me:20631: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:20578: \$? = $ac_status" >&5 + echo "$as_me:20634: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_Lib=yes" else @@ -20586,7 +20642,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:20589: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 +echo "$as_me:20645: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Lib"'}'`" >&6 if test "`eval echo '${'"$as_ac_Lib"'}'`" = yes; then cat >>confdefs.h <<\EOF @@ -20616,7 +20672,7 @@ fi; #AC_MSG_RESULT($use_trace) ## options for miscellaneous definitions -echo "$as_me:20619: checking for domain-name" >&5 +echo "$as_me:20675: checking for domain-name" >&5 echo $ECHO_N "checking for domain-name... $ECHO_C" >&6 # Check whether --with-domain-name or --without-domain-name was given. @@ -20628,7 +20684,7 @@ else fi; test -n "$withval" && \ case "$withval" in #(vi yes) - { { echo "$as_me:20631: error: expected a value for --with-domain-name" >&5 + { { echo "$as_me:20687: error: expected a value for --with-domain-name" >&5 echo "$as_me: error: expected a value for --with-domain-name" >&2;} { (exit 1); exit 1; }; } ;; #(vi @@ -20644,11 +20700,11 @@ cat >>confdefs.h <&5 +echo "$as_me:20703: result: $DOMAIN_NAME" >&5 echo "${ECHO_T}$DOMAIN_NAME" >&6 if test "$USE_NNTP" = "yes" ; then -echo "$as_me:20651: checking for NNTP default-server" >&5 +echo "$as_me:20707: checking for NNTP default-server" >&5 echo $ECHO_N "checking for NNTP default-server... $ECHO_C" >&6 # Check whether --with-nntp-default-server or --without-nntp-default-server was given. @@ -20660,7 +20716,7 @@ else fi; test -z "$withval" && withval=no case "$withval" in #(vi yes) - { { echo "$as_me:20663: error: expected a value for --with-nntp-default-server" >&5 + { { echo "$as_me:20719: error: expected a value for --with-nntp-default-server" >&5 echo "$as_me: error: expected a value for --with-nntp-default-server" >&2;} { (exit 1); exit 1; }; } ;; #(vi @@ -20688,7 +20744,7 @@ NNTP_DEFAULT_SERVER="$withval" NNTP_DEFAULT_SERVER="news" fi fi -echo "$as_me:20691: result: $NNTP_DEFAULT_SERVER" >&5 +echo "$as_me:20747: result: $NNTP_DEFAULT_SERVER" >&5 echo "${ECHO_T}$NNTP_DEFAULT_SERVER" >&6 fi @@ -20717,7 +20773,7 @@ cat >>confdefs.h <&5 +echo "$as_me:20776: checking whether to use MH style mail handling for mailgroups" >&5 echo $ECHO_N "checking whether to use MH style mail handling for mailgroups... $ECHO_C" >&6 # Check whether --enable-mh-mail-handling or --disable-mh-mail-handling was given. @@ -20734,10 +20790,10 @@ EOF else enableval=no fi; -echo "$as_me:20737: result: $enableval" >&5 +echo "$as_me:20793: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:20740: checking whether to use Cancel-Locks" >&5 +echo "$as_me:20796: checking whether to use Cancel-Locks" >&5 echo $ECHO_N "checking whether to use Cancel-Locks... $ECHO_C" >&6 # Check whether --enable-cancel-locks or --disable-cancel-locks was given. @@ -20750,12 +20806,12 @@ if test "${enable_cancel_locks+set}" = s else enableval=no fi; -echo "$as_me:20753: result: $enableval" >&5 +echo "$as_me:20809: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 USE_CANLOCK=$enableval if test "$USE_CANLOCK" = yes ; then - echo "$as_me:20758: checking whether to use installed canlock rather than bundled" >&5 + echo "$as_me:20814: checking whether to use installed canlock rather than bundled" >&5 echo $ECHO_N "checking whether to use installed canlock rather than bundled... $ECHO_C" >&6 # Check whether --with-canlock or --without-canlock was given. @@ -20765,7 +20821,7 @@ if test "${with_canlock+set}" = set; the else CANLOCK_HOME=$USE_CANLOCK fi; - echo "$as_me:20768: result: $CANLOCK_HOME" >&5 + echo "$as_me:20824: result: $CANLOCK_HOME" >&5 echo "${ECHO_T}$CANLOCK_HOME" >&6 cf_canlock_home=$CANLOCK_HOME @@ -20778,7 +20834,7 @@ case .$cf_canlock_home in #(vi .no) #(vi test -n "$verbose" && echo " using bundled canlock" 1>&6 -echo "${as_me:-configure}:20781: testing using bundled canlock ..." 1>&5 +echo "${as_me:-configure}:20837: testing using bundled canlock ..." 1>&5 CANLIBS='-L../libcanlock -lcanlock' CAN_CPPFLAGS='-I$(top_builddir)/libcanlock/include -I$(top_srcdir)/libcanlock/include' @@ -20793,17 +20849,31 @@ cf_find_CANLOCK=yes if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libcanlock-3"; then test -n "$verbose" && echo " found package libcanlock-3" 1>&6 -echo "${as_me:-configure}:20796: testing found package libcanlock-3 ..." 1>&5 +echo "${as_me:-configure}:20852: testing found package libcanlock-3 ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libcanlock-3" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libcanlock-3" 2>/dev/null`" test -n "$verbose" && echo " package libcanlock-3 CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:20802: testing package libcanlock-3 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:20858: testing package libcanlock-3 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libcanlock-3 LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:20806: testing package libcanlock-3 LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:20862: testing package libcanlock-3 LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libcanlock-3 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -20927,17 +20997,31 @@ else if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libcanlock"; then test -n "$verbose" && echo " found package libcanlock" 1>&6 -echo "${as_me:-configure}:20930: testing found package libcanlock ..." 1>&5 +echo "${as_me:-configure}:21000: testing found package libcanlock ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libcanlock" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libcanlock" 2>/dev/null`" test -n "$verbose" && echo " package libcanlock CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:20936: testing package libcanlock CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:21006: testing package libcanlock CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libcanlock LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:20940: testing package libcanlock LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:21010: testing package libcanlock LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libcanlock +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -21063,7 +21147,7 @@ else for cf_canlock_lib in canlock3 canlock do as_ac_Lib=`echo "ac_cv_lib_$cf_canlock_lib''_cl_clear_secret" | $as_tr_sh` -echo "$as_me:21066: checking for cl_clear_secret in -l$cf_canlock_lib" >&5 +echo "$as_me:21150: checking for cl_clear_secret in -l$cf_canlock_lib" >&5 echo $ECHO_N "checking for cl_clear_secret in -l$cf_canlock_lib... $ECHO_C" >&6 if eval "test \"\${$as_ac_Lib+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -21071,7 +21155,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-l$cf_canlock_lib $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 21074 "configure" +#line 21158 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -21090,16 +21174,16 @@ cl_clear_secret (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:21093: \"$ac_link\"") >&5 +if { (eval echo "$as_me:21177: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:21096: \$? = $ac_status" >&5 + echo "$as_me:21180: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:21099: \"$ac_try\"") >&5 + { (eval echo "$as_me:21183: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:21102: \$? = $ac_status" >&5 + echo "$as_me:21186: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_Lib=yes" else @@ -21110,7 +21194,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:21113: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 +echo "$as_me:21197: result: `eval echo '${'"$as_ac_Lib"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Lib"'}'`" >&6 if test "`eval echo '${'"$as_ac_Lib"'}'`" = yes; then @@ -21127,23 +21211,23 @@ fi for ac_header in libcanlock-3/canlock.h canlock.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:21130: checking for $ac_header" >&5 +echo "$as_me:21214: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 21136 "configure" +#line 21220 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:21140: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:21224: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:21146: \$? = $ac_status" >&5 + echo "$as_me:21230: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -21162,7 +21246,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:21165: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:21249: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&6 -echo "${as_me:-configure}:21194: testing using installed canlock ..." 1>&5 +echo "${as_me:-configure}:21278: testing using installed canlock ..." 1>&5 else test -n "$verbose" && echo " using bundled canlock because no installed canlock was found" 1>&6 -echo "${as_me:-configure}:21200: testing using bundled canlock because no installed canlock was found ..." 1>&5 +echo "${as_me:-configure}:21284: testing using bundled canlock because no installed canlock was found ..." 1>&5 CANLIBS='-L../libcanlock -lcanlock' CAN_CPPFLAGS='-I$(top_builddir)/libcanlock/include -I$(top_srcdir)/libcanlock/include' @@ -21231,7 +21315,7 @@ xno|xNONE/*) cf_canlock_home=`echo "$cf_canlock_home" | sed -e s%NONE%$cf_path_syntax%` ;; *) - { { echo "$as_me:21234: error: expected a pathname, not \"$cf_canlock_home\"" >&5 + { { echo "$as_me:21318: error: expected a pathname, not \"$cf_canlock_home\"" >&5 echo "$as_me: error: expected a pathname, not \"$cf_canlock_home\"" >&2;} { (exit 1); exit 1; }; } ;; @@ -21242,7 +21326,7 @@ esac CAN_CPPFLAGS="-I${cf_canlock_home}/include" test -n "$verbose" && echo " using installed canlock $cf_canlock_home" 1>&6 -echo "${as_me:-configure}:21245: testing using installed canlock $cf_canlock_home ..." 1>&5 +echo "${as_me:-configure}:21329: testing using installed canlock $cf_canlock_home ..." 1>&5 ;; esac @@ -21259,23 +21343,24 @@ fi ## we currently check for gsasl_free() (avail since 0.2.19) ## update if we ever use calls from a newer API gsasl=no -echo "$as_me:21262: checking for gsasl.h" >&5 +if test "$USE_NNTP" = "yes" ; then +echo "$as_me:21347: checking for gsasl.h" >&5 echo $ECHO_N "checking for gsasl.h... $ECHO_C" >&6 if test "${ac_cv_header_gsasl_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 21268 "configure" +#line 21353 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:21272: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:21357: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:21278: \$? = $ac_status" >&5 + echo "$as_me:21363: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -21294,10 +21379,10 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:21297: result: $ac_cv_header_gsasl_h" >&5 +echo "$as_me:21382: result: $ac_cv_header_gsasl_h" >&5 echo "${ECHO_T}$ac_cv_header_gsasl_h" >&6 if test "$ac_cv_header_gsasl_h" = yes; then - echo "$as_me:21300: checking for gsasl_free in -lgsasl" >&5 + echo "$as_me:21385: checking for gsasl_free in -lgsasl" >&5 echo $ECHO_N "checking for gsasl_free in -lgsasl... $ECHO_C" >&6 if test "${ac_cv_lib_gsasl_gsasl_free+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -21305,7 +21390,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgsasl $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 21308 "configure" +#line 21393 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -21324,16 +21409,16 @@ gsasl_free (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:21327: \"$ac_link\"") >&5 +if { (eval echo "$as_me:21412: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:21330: \$? = $ac_status" >&5 + echo "$as_me:21415: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:21333: \"$ac_try\"") >&5 + { (eval echo "$as_me:21418: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:21336: \$? = $ac_status" >&5 + echo "$as_me:21421: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gsasl_gsasl_free=yes else @@ -21344,7 +21429,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:21347: result: $ac_cv_lib_gsasl_gsasl_free" >&5 +echo "$as_me:21432: result: $ac_cv_lib_gsasl_gsasl_free" >&5 echo "${ECHO_T}$ac_cv_lib_gsasl_gsasl_free" >&6 if test "$ac_cv_lib_gsasl_gsasl_free" = yes; then gsasl=yes @@ -21352,6 +21437,7 @@ fi fi +fi if test "$gsasl" = "yes"; then # Check whether --enable-gsasl or --disable-gsasl was given. @@ -21382,7 +21468,7 @@ EOF fi; fi -echo "$as_me:21385: checking whether to enable 8-bit keycodes" >&5 +echo "$as_me:21471: checking whether to enable 8-bit keycodes" >&5 echo $ECHO_N "checking whether to enable 8-bit keycodes... $ECHO_C" >&6 # Check whether --enable-8bit-keys or --disable-8bit-keys was given. @@ -21406,10 +21492,10 @@ cat >>confdefs.h <<\EOF EOF fi; -echo "$as_me:21409: result: $enableval" >&5 +echo "$as_me:21495: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21412: checking whether to enable ANSI-color" >&5 +echo "$as_me:21498: checking whether to enable ANSI-color" >&5 echo $ECHO_N "checking whether to enable ANSI-color... $ECHO_C" >&6 # Check whether --enable-color or --disable-color was given. @@ -21423,10 +21509,10 @@ else enableval=yes fi; use_color=$enableval -echo "$as_me:21426: result: $use_color" >&5 +echo "$as_me:21512: result: $use_color" >&5 echo "${ECHO_T}$use_color" >&6 -echo "$as_me:21429: checking whether to enable posting-etiquette" >&5 +echo "$as_me:21515: checking whether to enable posting-etiquette" >&5 echo $ECHO_N "checking whether to enable posting-etiquette... $ECHO_C" >&6 # Check whether --enable-etiquette or --disable-etiquette was given. @@ -21443,10 +21529,10 @@ EOF else enableval=yes fi; -echo "$as_me:21446: result: $enableval" >&5 +echo "$as_me:21532: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21449: checking whether to strictly observe RFC2047 and break long lines" >&5 +echo "$as_me:21535: checking whether to strictly observe RFC2047 and break long lines" >&5 echo $ECHO_N "checking whether to strictly observe RFC2047 and break long lines... $ECHO_C" >&6 # Check whether --enable-break-long-lines or --disable-break-long-lines was given. @@ -21470,10 +21556,10 @@ cat >>confdefs.h <<\EOF EOF fi; -echo "$as_me:21473: result: $enableval" >&5 +echo "$as_me:21559: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21476: checking whether to force MM_CHARSET obeyance when decoding mime" >&5 +echo "$as_me:21562: checking whether to force MM_CHARSET obeyance when decoding mime" >&5 echo $ECHO_N "checking whether to force MM_CHARSET obeyance when decoding mime... $ECHO_C" >&6 # Check whether --enable-mime-strict-charset or --disable-mime-strict-charset was given. @@ -21497,10 +21583,10 @@ cat >>confdefs.h <<\EOF EOF fi; -echo "$as_me:21500: result: $enableval" >&5 +echo "$as_me:21586: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21503: checking for MIME character-set" >&5 +echo "$as_me:21589: checking for MIME character-set" >&5 echo $ECHO_N "checking for MIME character-set... $ECHO_C" >&6 # Check whether --with-mime-default-charset or --without-mime-default-charset was given. @@ -21512,7 +21598,7 @@ else fi; case "$withval" in #(vi yes|no) - { { echo "$as_me:21515: error: expected a value for --with-mime-default-charset" >&5 + { { echo "$as_me:21601: error: expected a value for --with-mime-default-charset" >&5 echo "$as_me: error: expected a value for --with-mime-default-charset" >&2;} { (exit 1); exit 1; }; } ;; @@ -21523,10 +21609,10 @@ cat >>confdefs.h <&5 +echo "$as_me:21612: result: $MM_CHARSET" >&5 echo "${ECHO_T}$MM_CHARSET" >&6 -echo "$as_me:21529: checking for default ISO/ASCII table" >&5 +echo "$as_me:21615: checking for default ISO/ASCII table" >&5 echo $ECHO_N "checking for default ISO/ASCII table... $ECHO_C" >&6 # Check whether --with-iso-to-ascii or --without-iso-to-ascii was given. @@ -21538,7 +21624,7 @@ else fi; case "$withval" in #(vi yes|no) - { { echo "$as_me:21541: error: expected a value for --with-iso-to-ascii" >&5 + { { echo "$as_me:21627: error: expected a value for --with-iso-to-ascii" >&5 echo "$as_me: error: expected a value for --with-iso-to-ascii" >&2;} { (exit 1); exit 1; }; } ;; @@ -21549,10 +21635,10 @@ cat >>confdefs.h <&5 +echo "$as_me:21638: result: $DEFAULT_ISO2ASC" >&5 echo "${ECHO_T}$DEFAULT_ISO2ASC" >&6 -echo "$as_me:21555: checking whether to enable locale support" >&5 +echo "$as_me:21641: checking whether to enable locale support" >&5 echo $ECHO_N "checking whether to enable locale support... $ECHO_C" >&6 # Check whether --enable-locale or --disable-locale was given. @@ -21569,10 +21655,10 @@ EOF else enableval=yes fi; -echo "$as_me:21572: result: $enableval" >&5 +echo "$as_me:21658: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21575: checking whether to enable posting" >&5 +echo "$as_me:21661: checking whether to enable posting" >&5 echo $ECHO_N "checking whether to enable posting... $ECHO_C" >&6 # Check whether --enable-posting or --disable-posting was given. @@ -21589,10 +21675,10 @@ EOF else enableval=yes fi; -echo "$as_me:21592: result: $enableval" >&5 +echo "$as_me:21678: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21595: checking whether to enable shell escape" >&5 +echo "$as_me:21681: checking whether to enable shell escape" >&5 echo $ECHO_N "checking whether to enable shell escape... $ECHO_C" >&6 # Check whether --enable-shell-escape or --disable-shell-escape was given. @@ -21609,10 +21695,10 @@ EOF else enableval=yes fi; -echo "$as_me:21612: result: $enableval" >&5 +echo "$as_me:21698: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21615: checking whether to have fascist newsadmin" >&5 +echo "$as_me:21701: checking whether to have fascist newsadmin" >&5 echo $ECHO_N "checking whether to have fascist newsadmin... $ECHO_C" >&6 # Check whether --enable-fascist-newsadmin or --disable-fascist-newsadmin was given. @@ -21629,10 +21715,10 @@ EOF else enableval=no fi; -echo "$as_me:21632: result: $enableval" >&5 +echo "$as_me:21718: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21635: checking whether to enable inverse video and highlighting" >&5 +echo "$as_me:21721: checking whether to enable inverse video and highlighting" >&5 echo $ECHO_N "checking whether to enable inverse video and highlighting... $ECHO_C" >&6 # Check whether --enable-inverse-video or --disable-inverse-video was given. @@ -21649,10 +21735,10 @@ EOF else enableval=yes fi; -echo "$as_me:21652: result: $enableval" >&5 +echo "$as_me:21738: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21655: checking whether to enable piping support" >&5 +echo "$as_me:21741: checking whether to enable piping support" >&5 echo $ECHO_N "checking whether to enable piping support... $ECHO_C" >&6 # Check whether --enable-piping or --disable-piping was given. @@ -21669,10 +21755,10 @@ EOF else enableval=yes fi; -echo "$as_me:21672: result: $enableval" >&5 +echo "$as_me:21758: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 -echo "$as_me:21675: checking whether to enable printer support" >&5 +echo "$as_me:21761: checking whether to enable printer support" >&5 echo $ECHO_N "checking whether to enable printer support... $ECHO_C" >&6 # Check whether --enable-printing or --disable-printing was given. @@ -21689,11 +21775,11 @@ EOF else enableval=yes fi; -echo "$as_me:21692: result: $enableval" >&5 +echo "$as_me:21778: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 ### TODO: skip and disable if $ac_cv_sys_long_file_names != yes -echo "$as_me:21696: checking whether to unique tmp-files by appending .pid" >&5 +echo "$as_me:21782: checking whether to unique tmp-files by appending .pid" >&5 echo $ECHO_N "checking whether to unique tmp-files by appending .pid... $ECHO_C" >&6 # Check whether --enable-append-pid or --disable-append-pid was given. @@ -21717,59 +21803,11 @@ cat >>confdefs.h <<\EOF EOF fi; -echo "$as_me:21720: result: $enableval" >&5 -echo "${ECHO_T}$enableval" >&6 - -echo "$as_me:21723: checking whether to fallback to XHDR XREF if XOVER isn't supported" >&5 -echo $ECHO_N "checking whether to fallback to XHDR XREF if XOVER isn't supported... $ECHO_C" >&6 - -# Check whether --enable-xhdr-xref or --disable-xhdr-xref was given. -if test "${enable_xhdr_xref+set}" = set; then - enableval="$enable_xhdr_xref" - test "$enableval" != no && enableval=yes - if test "$enableval" != "yes" ; then - : - else - -cat >>confdefs.h <<\EOF -#define XHDR_XREF 1 -EOF - - fi -else - enableval=yes - -cat >>confdefs.h <<\EOF -#define XHDR_XREF 1 -EOF - -fi; -echo "$as_me:21747: result: $enableval" >&5 -echo "${ECHO_T}$enableval" >&6 - -### bypass a bug in old versions of leafnode & NNTPcache -echo "$as_me:21751: checking whether to send a GROUP command before a LISTGROUP" >&5 -echo $ECHO_N "checking whether to send a GROUP command before a LISTGROUP... $ECHO_C" >&6 - -# Check whether --enable-broken-listgroup-fix or --disable-broken-listgroup-fix was given. -if test "${enable_broken_listgroup_fix+set}" = set; then - enableval="$enable_broken_listgroup_fix" - test "$enableval" != yes && enableval=no - if test "$enableval" != "no" ; then - -cat >>confdefs.h <<\EOF -#define BROKEN_LISTGROUP 1 -EOF - - fi -else - enableval=no -fi; -echo "$as_me:21768: result: $enableval" >&5 +echo "$as_me:21806: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 ### on some old systems the WIFEXITED()/WEXITSTATUS() macros do not work -echo "$as_me:21772: checking whether to ignore system()s return value" >&5 +echo "$as_me:21810: checking whether to ignore system()s return value" >&5 echo $ECHO_N "checking whether to ignore system()s return value... $ECHO_C" >&6 # Check whether --enable-broken-system-fix or --disable-broken-system-fix was given. @@ -21786,11 +21824,11 @@ EOF else enableval=no fi; -echo "$as_me:21789: result: $enableval" >&5 +echo "$as_me:21827: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 ### checks for the location of the system-wide default setting file -echo "$as_me:21793: checking for directory containing tin.defaults file" >&5 +echo "$as_me:21831: checking for directory containing tin.defaults file" >&5 echo $ECHO_N "checking for directory containing tin.defaults file... $ECHO_C" >&6 # Check whether --with-defaults-dir or --without-defaults-dir was given. @@ -21824,7 +21862,7 @@ xno|xNONE/*) withval=`echo "$withval" | sed -e s%NONE%$cf_path_syntax%` ;; *) - { { echo "$as_me:21827: error: expected a pathname, not \"$withval\"" >&5 + { { echo "$as_me:21865: error: expected a pathname, not \"$withval\"" >&5 echo "$as_me: error: expected a pathname, not \"$withval\"" >&2;} { (exit 1); exit 1; }; } ;; @@ -21833,7 +21871,7 @@ esac fi eval TIN_DEFAULTS_DIR="$withval" -echo "$as_me:21836: result: $TIN_DEFAULTS_DIR" >&5 +echo "$as_me:21874: result: $TIN_DEFAULTS_DIR" >&5 echo "${ECHO_T}$TIN_DEFAULTS_DIR" >&6 cat >>confdefs.h <>confdefs.h <&5 +echo "$as_me:21882: checking whether to enable IPv6" >&5 echo $ECHO_N "checking whether to enable IPv6... $ECHO_C" >&6 # Check whether --enable-ipv6 or --disable-ipv6 was given. @@ -21865,11 +21903,11 @@ cat >>confdefs.h <<\EOF EOF fi; -echo "$as_me:21868: result: $enableval" >&5 +echo "$as_me:21906: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 if test "$enableval" = "yes"; then -echo "$as_me:21872: checking ipv6 stack type" >&5 +echo "$as_me:21910: checking ipv6 stack type" >&5 echo $ECHO_N "checking ipv6 stack type... $ECHO_C" >&6 if test "${cf_cv_ipv6type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -21890,7 +21928,7 @@ do ;; inria) cat >"conftest.$ac_ext" <<_ACEOF -#line 21893 "configure" +#line 21931 "configure" #include "confdefs.h" #include @@ -21907,7 +21945,7 @@ rm -rf conftest* ;; kame) cat >"conftest.$ac_ext" <<_ACEOF -#line 21910 "configure" +#line 21948 "configure" #include "confdefs.h" #include @@ -21924,7 +21962,7 @@ rm -rf conftest* ;; linux-glibc) cat >"conftest.$ac_ext" <<_ACEOF -#line 21927 "configure" +#line 21965 "configure" #include "confdefs.h" #include @@ -21950,7 +21988,7 @@ rm -rf conftest* ;; toshiba) cat >"conftest.$ac_ext" <<_ACEOF -#line 21953 "configure" +#line 21991 "configure" #include "confdefs.h" #include @@ -21967,7 +22005,7 @@ rm -rf conftest* ;; v6d) cat >"conftest.$ac_ext" <<_ACEOF -#line 21970 "configure" +#line 22008 "configure" #include "confdefs.h" #include @@ -21984,7 +22022,7 @@ rm -rf conftest* ;; zeta) cat >"conftest.$ac_ext" <<_ACEOF -#line 21987 "configure" +#line 22025 "configure" #include "confdefs.h" #include @@ -22006,13 +22044,13 @@ rm -rf conftest* done fi -echo "$as_me:22009: result: $cf_cv_ipv6type" >&5 +echo "$as_me:22047: result: $cf_cv_ipv6type" >&5 echo "${ECHO_T}$cf_cv_ipv6type" >&6 cf_ipv6lib=none cf_ipv6dir=none -echo "$as_me:22015: checking for IPv6 library if required" >&5 +echo "$as_me:22053: checking for IPv6 library if required" >&5 echo $ECHO_N "checking for IPv6 library if required... $ECHO_C" >&6 case "$cf_cv_ipv6type" in solaris) @@ -22042,13 +22080,13 @@ zeta) cf_ipv6dir=v6 ;; esac -echo "$as_me:22045: result: $cf_ipv6lib" >&5 +echo "$as_me:22083: result: $cf_ipv6lib" >&5 echo "${ECHO_T}$cf_ipv6lib" >&6 if test "$cf_ipv6lib" != "none"; then cat >"conftest.$ac_ext" <<_ACEOF -#line 22051 "configure" +#line 22089 "configure" #include "confdefs.h" #include @@ -22064,16 +22102,16 @@ getaddrinfo(0, 0, 0, 0) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22067: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22105: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22070: \$? = $ac_status" >&5 + echo "$as_me:22108: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22073: \"$ac_try\"") >&5 + { (eval echo "$as_me:22111: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22076: \$? = $ac_status" >&5 + echo "$as_me:22114: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -22194,7 +22232,7 @@ if test -n "$cf_incdir" ; then CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 22197 "configure" +#line 22235 "configure" #include "confdefs.h" #include int @@ -22206,16 +22244,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:22209: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:22247: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:22212: \$? = $ac_status" >&5 + echo "$as_me:22250: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:22215: \"$ac_try\"") >&5 + { (eval echo "$as_me:22253: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22218: \$? = $ac_status" >&5 + echo "$as_me:22256: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -22232,7 +22270,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:22235: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:22273: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -22260,13 +22298,13 @@ rm -f "conftest.$ac_objext" "conftest$ac eval 'cf_cv_have_lib_'"$cf_ipv6lib"'=no' cf_libdir="" - echo "$as_me:22263: checking for getaddrinfo" >&5 + echo "$as_me:22301: checking for getaddrinfo" >&5 echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6 if test "${ac_cv_func_getaddrinfo+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 22269 "configure" +#line 22307 "configure" #include "confdefs.h" #define getaddrinfo autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -22297,16 +22335,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22300: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22338: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22303: \$? = $ac_status" >&5 + echo "$as_me:22341: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22306: \"$ac_try\"") >&5 + { (eval echo "$as_me:22344: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22309: \$? = $ac_status" >&5 + echo "$as_me:22347: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_getaddrinfo=yes else @@ -22316,18 +22354,18 @@ ac_cv_func_getaddrinfo=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:22319: result: $ac_cv_func_getaddrinfo" >&5 +echo "$as_me:22357: result: $ac_cv_func_getaddrinfo" >&5 echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6 if test "$ac_cv_func_getaddrinfo" = yes; then eval 'cf_cv_have_lib_'"$cf_ipv6lib"'=yes' else cf_save_LIBS="$LIBS" - echo "$as_me:22326: checking for getaddrinfo in -l$cf_ipv6lib" >&5 + echo "$as_me:22364: checking for getaddrinfo in -l$cf_ipv6lib" >&5 echo $ECHO_N "checking for getaddrinfo in -l$cf_ipv6lib... $ECHO_C" >&6 LIBS="-l$cf_ipv6lib $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 22330 "configure" +#line 22368 "configure" #include "confdefs.h" #include @@ -22343,25 +22381,25 @@ getaddrinfo(0, 0, 0, 0) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22346: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22384: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22349: \$? = $ac_status" >&5 + echo "$as_me:22387: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22352: \"$ac_try\"") >&5 + { (eval echo "$as_me:22390: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22355: \$? = $ac_status" >&5 + echo "$as_me:22393: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:22357: result: yes" >&5 + echo "$as_me:22395: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_ipv6lib"'=yes' else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:22364: result: no" >&5 +echo "$as_me:22402: result: no" >&5 echo "${ECHO_T}no" >&6 cf_search= @@ -22429,11 +22467,11 @@ cf_search="$cf_library_path_list $cf_sea for cf_libdir in $cf_search do - echo "$as_me:22432: checking for -l$cf_ipv6lib in $cf_libdir" >&5 + echo "$as_me:22470: checking for -l$cf_ipv6lib in $cf_libdir" >&5 echo $ECHO_N "checking for -l$cf_ipv6lib in $cf_libdir... $ECHO_C" >&6 LIBS="-L$cf_libdir -l$cf_ipv6lib $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 22436 "configure" +#line 22474 "configure" #include "confdefs.h" #include @@ -22449,25 +22487,25 @@ getaddrinfo(0, 0, 0, 0) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22452: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22490: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22455: \$? = $ac_status" >&5 + echo "$as_me:22493: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22458: \"$ac_try\"") >&5 + { (eval echo "$as_me:22496: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22461: \$? = $ac_status" >&5 + echo "$as_me:22499: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:22463: result: yes" >&5 + echo "$as_me:22501: result: yes" >&5 echo "${ECHO_T}yes" >&6 eval 'cf_cv_have_lib_'"$cf_ipv6lib"'=yes' break else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:22470: result: no" >&5 +echo "$as_me:22508: result: no" >&5 echo "${ECHO_T}no" >&6 LIBS="$cf_save_LIBS" fi @@ -22482,7 +22520,7 @@ fi eval 'cf_found_library="$cf_cv_have_lib_'"$cf_ipv6lib"\" if test "$cf_found_library" = no ; then - { { echo "$as_me:22485: error: No $cf_ipv6lib library found, cannot continue. You must fetch lib$cf_ipv6lib.a + { { echo "$as_me:22523: error: No $cf_ipv6lib library found, cannot continue. You must fetch lib$cf_ipv6lib.a from an appropriate IPv6 kit and compile beforehand." >&5 echo "$as_me: error: No $cf_ipv6lib library found, cannot continue. You must fetch lib$cf_ipv6lib.a from an appropriate IPv6 kit and compile beforehand." >&2;} @@ -22490,7 +22528,7 @@ from an appropriate IPv6 kit and compile fi fi -echo "$as_me:22493: checking working getaddrinfo" >&5 +echo "$as_me:22531: checking working getaddrinfo" >&5 echo $ECHO_N "checking working getaddrinfo... $ECHO_C" >&6 if test "${cf_cv_getaddrinfo+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -22500,7 +22538,7 @@ if test "$cross_compiling" = yes; then cf_cv_getaddrinfo=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 22503 "configure" +#line 22541 "configure" #include "confdefs.h" $ac_includes_default @@ -22580,15 +22618,15 @@ int main(void) _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:22583: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22621: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22586: \$? = $ac_status" >&5 + echo "$as_me:22624: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:22588: \"$ac_try\"") >&5 + { (eval echo "$as_me:22626: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22591: \$? = $ac_status" >&5 + echo "$as_me:22629: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_getaddrinfo=yes else @@ -22601,7 +22639,7 @@ rm -f core ./core.* ./*.core "conftest$a fi fi -echo "$as_me:22604: result: $cf_cv_getaddrinfo" >&5 +echo "$as_me:22642: result: $cf_cv_getaddrinfo" >&5 echo "${ECHO_T}$cf_cv_getaddrinfo" >&6 if test "$cf_cv_getaddrinfo" = yes ; then @@ -22617,12 +22655,12 @@ fi if test "$cf_cv_getaddrinfo" != "yes"; then if test "$cf_cv_ipv6type" != "linux"; then - { echo "$as_me:22620: WARNING: You must get working getaddrinfo() function, + { echo "$as_me:22658: WARNING: You must get working getaddrinfo() function, or you can specify \"--disable-ipv6\"" >&5 echo "$as_me: WARNING: You must get working getaddrinfo() function, or you can specify \"--disable-ipv6\"" >&2;} else - { echo "$as_me:22625: WARNING: The getaddrinfo() implementation on your system seems be buggy. + { echo "$as_me:22663: WARNING: The getaddrinfo() implementation on your system seems be buggy. You should upgrade your system library to the newest version of GNU C library (aka glibc)." >&5 echo "$as_me: WARNING: The getaddrinfo() implementation on your system seems be buggy. @@ -22636,13 +22674,13 @@ fi for ac_func in getaddrinfo getnameinfo do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:22639: checking for $ac_func" >&5 +echo "$as_me:22677: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 22645 "configure" +#line 22683 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -22673,16 +22711,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22676: \"$ac_link\"") >&5 +if { (eval echo "$as_me:22714: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22679: \$? = $ac_status" >&5 + echo "$as_me:22717: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22682: \"$ac_try\"") >&5 + { (eval echo "$as_me:22720: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22685: \$? = $ac_status" >&5 + echo "$as_me:22723: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -22692,7 +22730,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:22695: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:22733: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:22746: checking whether to enable long article numbers" >&5 echo $ECHO_N "checking whether to enable long article numbers... $ECHO_C" >&6 # Check whether --enable-long-article-numbers or --disable-long-article-numbers was given. @@ -22722,12 +22760,12 @@ EOF else enableval=no fi; -echo "$as_me:22725: result: $enableval" >&5 +echo "$as_me:22763: result: $enableval" >&5 echo "${ECHO_T}$enableval" >&6 ### TLS support if test "$USE_NNTP" = "yes" ; then -echo "$as_me:22730: checking whether to enable NNTPS support" >&5 +echo "$as_me:22768: checking whether to enable NNTPS support" >&5 echo $ECHO_N "checking whether to enable NNTPS support... $ECHO_C" >&6 # Check whether --with-nntps or --without-nntps was given. @@ -22737,7 +22775,7 @@ if test "${with_nntps+set}" = set; then else enable_nntps="no" fi; -echo "$as_me:22740: result: $enable_nntps" >&5 +echo "$as_me:22778: result: $enable_nntps" >&5 echo "${ECHO_T}$enable_nntps" >&6 # TODO: checklib for openssl in non pkg-config case @@ -22746,23 +22784,37 @@ echo "${ECHO_T}$enable_nntps" >&6 if test "$enable_nntps" != "no"; then if test "$enable_nntps" = "yes" || test "$enable_nntps" = "libtls"; then -echo "$as_me:22749: checking for LibreSSL" >&5 +echo "$as_me:22787: checking for LibreSSL" >&5 echo $ECHO_N "checking for LibreSSL... $ECHO_C" >&6 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libtls"; then test -n "$verbose" && echo " found package libtls" 1>&6 -echo "${as_me:-configure}:22755: testing found package libtls ..." 1>&5 +echo "${as_me:-configure}:22793: testing found package libtls ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libtls" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libtls" 2>/dev/null`" test -n "$verbose" && echo " package libtls CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:22761: testing package libtls CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:22799: testing package libtls CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libtls LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:22765: testing package libtls LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:22803: testing package libtls LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libtls +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -22879,7 +22931,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 22882 "configure" +#line 22934 "configure" #include "confdefs.h" #include @@ -22897,24 +22949,30 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:22900: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:22952: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:22903: \$? = $ac_status" >&5 + echo "$as_me:22955: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:22906: \"$ac_try\"") >&5 + { (eval echo "$as_me:22958: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22909: \$? = $ac_status" >&5 + echo "$as_me:22961: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - have_libtls=yes + +have_libtls=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:22966: result: $have_libtls" >&5 +echo "${ECHO_T}$have_libtls" >&6 +fi + else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 have_libtls=no -echo "$as_me:22917: result: \tLibreSSL TLS_API too old (< 20200120)" >&5 +echo "$as_me:22975: result: \tLibreSSL TLS_API too old (< 20200120)" >&5 echo "${ECHO_T}\tLibreSSL TLS_API too old (< 20200120)" >&6 fi @@ -22923,7 +22981,7 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= -echo "$as_me:22926: checking for tls_config_new in -ltls" >&5 +echo "$as_me:22984: checking for tls_config_new in -ltls" >&5 echo $ECHO_N "checking for tls_config_new in -ltls... $ECHO_C" >&6 if test "${ac_cv_lib_tls_tls_config_new+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -22931,7 +22989,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-ltls $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 22934 "configure" +#line 22992 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -22950,16 +23008,16 @@ tls_config_new (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:22953: \"$ac_link\"") >&5 +if { (eval echo "$as_me:23011: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:22956: \$? = $ac_status" >&5 + echo "$as_me:23014: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:22959: \"$ac_try\"") >&5 + { (eval echo "$as_me:23017: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:22962: \$? = $ac_status" >&5 + echo "$as_me:23020: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_tls_tls_config_new=yes else @@ -22970,30 +23028,30 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:22973: result: $ac_cv_lib_tls_tls_config_new" >&5 +echo "$as_me:23031: result: $ac_cv_lib_tls_tls_config_new" >&5 echo "${ECHO_T}$ac_cv_lib_tls_tls_config_new" >&6 if test "$ac_cv_lib_tls_tls_config_new" = yes; then for ac_header in tls.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:22980: checking for $ac_header" >&5 +echo "$as_me:23038: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 22986 "configure" +#line 23044 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:22990: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:23048: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:22996: \$? = $ac_status" >&5 + echo "$as_me:23054: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -23012,7 +23070,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:23015: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:23073: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <"conftest.$ac_ext" <<_ACEOF -#line 23023 "configure" +#line 23081 "configure" #include "confdefs.h" #include @@ -23038,26 +23096,30 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23041: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:23099: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23044: \$? = $ac_status" >&5 + echo "$as_me:23102: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23047: \"$ac_try\"") >&5 + { (eval echo "$as_me:23105: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23050: \$? = $ac_status" >&5 + echo "$as_me:23108: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then LIBS="$LIBS -ltls" have_libtls=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:23114: result: $have_libtls" >&5 +echo "${ECHO_T}$have_libtls" >&6 +fi else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 have_libtls=no -echo "$as_me:23060: result: \tLibreSSL TLS_API too old (< 20200120)" >&5 +echo "$as_me:23122: result: \tLibreSSL TLS_API too old (< 20200120)" >&5 echo "${ECHO_T}\tLibreSSL TLS_API too old (< 20200120)" >&6 fi @@ -23071,7 +23133,7 @@ done else have_libtls=no -echo "$as_me:23074: result: $have_libtls" >&5 +echo "$as_me:23136: result: $have_libtls" >&5 echo "${ECHO_T}$have_libtls" >&6 fi @@ -23082,23 +23144,37 @@ fi if test "$enable_nntps" = "yes" && test "$have_libtls" = "no" || test "$enable_nntps" = "openssl"; then -echo "$as_me:23085: checking for OpenSSL" >&5 +echo "$as_me:23147: checking for OpenSSL" >&5 echo $ECHO_N "checking for OpenSSL... $ECHO_C" >&6 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "openssl"; then test -n "$verbose" && echo " found package openssl" 1>&6 -echo "${as_me:-configure}:23091: testing found package openssl ..." 1>&5 +echo "${as_me:-configure}:23153: testing found package openssl ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "openssl" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "openssl" 2>/dev/null`" test -n "$verbose" && echo " package openssl CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:23097: testing package openssl CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:23159: testing package openssl CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package openssl LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:23101: testing package openssl LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:23163: testing package openssl LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in openssl +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -23215,7 +23291,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 23218 "configure" +#line 23294 "configure" #include "confdefs.h" #include @@ -23238,24 +23314,30 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23241: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:23317: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23244: \$? = $ac_status" >&5 + echo "$as_me:23320: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23247: \"$ac_try\"") >&5 + { (eval echo "$as_me:23323: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23250: \$? = $ac_status" >&5 + echo "$as_me:23326: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - have_openssl=yes + +have_openssl=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:23331: result: $have_openssl" >&5 +echo "${ECHO_T}$have_openssl" >&6 +fi + else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 have_openssl=no -echo "$as_me:23258: result: \tOpenSSL too old (< 1.1.1)" >&5 +echo "$as_me:23340: result: \tOpenSSL too old (< 1.1.1)" >&5 echo "${ECHO_T}\tOpenSSL too old (< 1.1.1)" >&6 fi @@ -23265,7 +23347,7 @@ else cf_pkgconfig_libs= have_openssl=no -echo "$as_me:23268: result: $have_openssl" >&5 +echo "$as_me:23350: result: $have_openssl" >&5 echo "${ECHO_T}$have_openssl" >&6 fi @@ -23274,23 +23356,37 @@ fi if test "$enable_nntps" = "yes" && test "$have_libtls" = "no" && test "$have_openssl" = "no" || test "$enable_nntps" = "gnutls"; then -echo "$as_me:23277: checking for GnuTLS" >&5 +echo "$as_me:23359: checking for GnuTLS" >&5 echo $ECHO_N "checking for GnuTLS... $ECHO_C" >&6 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "gnutls"; then test -n "$verbose" && echo " found package gnutls" 1>&6 -echo "${as_me:-configure}:23283: testing found package gnutls ..." 1>&5 +echo "${as_me:-configure}:23365: testing found package gnutls ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "gnutls" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "gnutls" 2>/dev/null`" test -n "$verbose" && echo " package gnutls CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:23289: testing package gnutls CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:23371: testing package gnutls CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package gnutls LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:23293: testing package gnutls LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:23375: testing package gnutls LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in gnutls +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -23407,7 +23503,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 23410 "configure" +#line 23506 "configure" #include "confdefs.h" #include @@ -23426,23 +23522,29 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23429: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:23525: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23432: \$? = $ac_status" >&5 + echo "$as_me:23528: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23435: \"$ac_try\"") >&5 + { (eval echo "$as_me:23531: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23438: \$? = $ac_status" >&5 + echo "$as_me:23534: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - have_gnutls=yes + +have_gnutls=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:23539: result: $have_gnutls" >&5 +echo "${ECHO_T}$have_gnutls" >&6 +fi + else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:23445: result: \tGnuTLS too old (< 3.7.0)" >&5 +echo "$as_me:23547: result: \tGnuTLS too old (< 3.7.0)" >&5 echo "${ECHO_T}\tGnuTLS too old (< 3.7.0)" >&6 fi @@ -23451,7 +23553,7 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= -echo "$as_me:23454: checking for gnutls_certificate_allocate_credentials in -lgnutls" >&5 +echo "$as_me:23556: checking for gnutls_certificate_allocate_credentials in -lgnutls" >&5 echo $ECHO_N "checking for gnutls_certificate_allocate_credentials in -lgnutls... $ECHO_C" >&6 if test "${ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -23459,7 +23561,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lgnutls $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 23462 "configure" +#line 23564 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -23478,16 +23580,16 @@ gnutls_certificate_allocate_credentials } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:23481: \"$ac_link\"") >&5 +if { (eval echo "$as_me:23583: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:23484: \$? = $ac_status" >&5 + echo "$as_me:23586: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:23487: \"$ac_try\"") >&5 + { (eval echo "$as_me:23589: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23490: \$? = $ac_status" >&5 + echo "$as_me:23592: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials=yes else @@ -23498,30 +23600,30 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:23501: result: $ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials" >&5 +echo "$as_me:23603: result: $ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials" >&5 echo "${ECHO_T}$ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials" >&6 if test "$ac_cv_lib_gnutls_gnutls_certificate_allocate_credentials" = yes; then for ac_header in gnutls/gnutls.h gnutls/x509.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:23508: checking for $ac_header" >&5 +echo "$as_me:23610: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 23514 "configure" +#line 23616 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:23518: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:23620: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:23524: \$? = $ac_status" >&5 + echo "$as_me:23626: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -23540,7 +23642,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:23543: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:23645: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <"conftest.$ac_ext" <<_ACEOF -#line 23551 "configure" +#line 23653 "configure" #include "confdefs.h" #include @@ -23567,26 +23669,30 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23570: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:23672: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23573: \$? = $ac_status" >&5 + echo "$as_me:23675: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23576: \"$ac_try\"") >&5 + { (eval echo "$as_me:23678: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23579: \$? = $ac_status" >&5 + echo "$as_me:23681: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then LIBS="$LIBS -lgnutls" have_gnutls=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:23687: result: $have_gnutls" >&5 +echo "${ECHO_T}$have_gnutls" >&6 +fi else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 have_gnutls=no -echo "$as_me:23589: result: \tGnuTLS too old (< 3.7.0)" >&5 +echo "$as_me:23695: result: \tGnuTLS too old (< 3.7.0)" >&5 echo "${ECHO_T}\tGnuTLS too old (< 3.7.0)" >&6 fi @@ -23599,8 +23705,8 @@ done else -have_gnutls=no=no -echo "$as_me:23603: result: $have_gnutls" >&5 +have_gnutls=no +echo "$as_me:23709: result: $have_gnutls" >&5 echo "${ECHO_T}$have_gnutls" >&6 fi @@ -23610,7 +23716,7 @@ fi fi if test "$have_libtls" != "yes" && test "$have_openssl" != "yes" && test "$have_gnutls" != "yes"; then - { { echo "$as_me:23613: error: You requested NNTPS support but no usable TLS implementation was found" >&5 + { { echo "$as_me:23719: error: You requested NNTPS support but no usable TLS implementation was found" >&5 echo "$as_me: error: You requested NNTPS support but no usable TLS implementation was found" >&2;} { (exit 1); exit 1; }; } else @@ -23650,23 +23756,34 @@ fi ### with separately if test "$have_libtls" = "yes"; then - echo "$as_me:23653: checking for libcrypto" >&5 -echo $ECHO_N "checking for libcrypto... $ECHO_C" >&6 - if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "crypto"; then test -n "$verbose" && echo " found package crypto" 1>&6 -echo "${as_me:-configure}:23659: testing found package crypto ..." 1>&5 +echo "${as_me:-configure}:23762: testing found package crypto ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "crypto" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "crypto" 2>/dev/null`" test -n "$verbose" && echo " package crypto CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:23665: testing package crypto CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:23768: testing package crypto CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package crypto LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:23669: testing package crypto LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:23772: testing package crypto LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in crypto +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -23783,7 +23900,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 23786 "configure" +#line 23903 "configure" #include "confdefs.h" #include @@ -23799,20 +23916,18 @@ BIO_free(NULL); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23802: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:23919: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23805: \$? = $ac_status" >&5 + echo "$as_me:23922: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23808: \"$ac_try\"") >&5 + { (eval echo "$as_me:23925: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23811: \$? = $ac_status" >&5 + echo "$as_me:23928: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - have_libcrypto=yes - cat >>confdefs.h <<\EOF #define HAVE_LIB_CRYPTO 1 EOF @@ -23822,8 +23937,6 @@ else cat "conftest.$ac_ext" >&5 have_libcrypto=no - echo "$as_me:23825: result: $have_libcrypto" >&5 -echo "${ECHO_T}$have_libcrypto" >&6 fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" @@ -23832,7 +23945,7 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= - echo "$as_me:23835: checking for BIO_free in -lcrypto" >&5 + echo "$as_me:23948: checking for BIO_free in -lcrypto" >&5 echo $ECHO_N "checking for BIO_free in -lcrypto... $ECHO_C" >&6 if test "${ac_cv_lib_crypto_BIO_free+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -23840,7 +23953,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lcrypto $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 23843 "configure" +#line 23956 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -23859,16 +23972,16 @@ BIO_free (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:23862: \"$ac_link\"") >&5 +if { (eval echo "$as_me:23975: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:23865: \$? = $ac_status" >&5 + echo "$as_me:23978: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:23868: \"$ac_try\"") >&5 + { (eval echo "$as_me:23981: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23871: \$? = $ac_status" >&5 + echo "$as_me:23984: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_crypto_BIO_free=yes else @@ -23879,30 +23992,30 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:23882: result: $ac_cv_lib_crypto_BIO_free" >&5 +echo "$as_me:23995: result: $ac_cv_lib_crypto_BIO_free" >&5 echo "${ECHO_T}$ac_cv_lib_crypto_BIO_free" >&6 if test "$ac_cv_lib_crypto_BIO_free" = yes; then for ac_header in openssl/ssl.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:23889: checking for $ac_header" >&5 +echo "$as_me:24002: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 23895 "configure" +#line 24008 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:23899: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:24012: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:23905: \$? = $ac_status" >&5 + echo "$as_me:24018: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -23921,7 +24034,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:23924: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:24037: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <"conftest.$ac_ext" <<_ACEOF -#line 23932 "configure" +#line 24045 "configure" #include "confdefs.h" #include @@ -23945,16 +24058,16 @@ BIO_free(NULL); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:23948: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:24061: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:23951: \$? = $ac_status" >&5 + echo "$as_me:24064: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:23954: \"$ac_try\"") >&5 + { (eval echo "$as_me:24067: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:23957: \$? = $ac_status" >&5 + echo "$as_me:24070: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then LIBS="$LIBS -lcrypto" @@ -23963,23 +24076,23 @@ if { (eval echo "$as_me:23948: \"$ac_com for ac_header in openssl/asn1.h openssl/bio.h openssl/pem.h openssl/x509.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:23966: checking for $ac_header" >&5 +echo "$as_me:24079: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 23972 "configure" +#line 24085 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:23976: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:24089: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:23982: \$? = $ac_status" >&5 + echo "$as_me:24095: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -23998,7 +24111,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:24001: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:24114: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 have_libcrypto=no - echo "$as_me:24020: result: $have_libcrypto" >&5 + echo "$as_me:24133: result: $have_libcrypto" >&5 echo "${ECHO_T}$have_libcrypto" >&6 fi @@ -24031,7 +24144,7 @@ done else have_libcrypto=no - echo "$as_me:24034: result: $have_libcrypto" >&5 + echo "$as_me:24147: result: $have_libcrypto" >&5 echo "${ECHO_T}$have_libcrypto" >&6 fi @@ -24042,24 +24155,56 @@ fi fi +echo "$as_me:24158: checking whether to enable URL normalization" >&5 +echo $ECHO_N "checking whether to enable URL normalization... $ECHO_C" >&6 + +# Check whether --with-url_normalization or --without-url_normalization was given. +if test "${with_url_normalization+set}" = set; then + withval="$with_url_normalization" + enable_url_normalization=$withval +else + enable_url_normalization="yes" +fi; +echo "$as_me:24168: result: $enable_url_normalization" >&5 +echo "${ECHO_T}$enable_url_normalization" >&6 + +if test "$enable_url_normalization" != "no"; then + if test "$enable_url_normalization" = "yes" || test "$enable_url_normalization" = "uriparser"; then + # -echo "$as_me:24046: checking for liburiparser" >&5 +echo "$as_me:24175: checking for liburiparser" >&5 echo $ECHO_N "checking for liburiparser... $ECHO_C" >&6 +cf_save_LIBS="$LIBS" +cf_save_CPPFLAGS="$CPPFLAGS" if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "liburiparser"; then test -n "$verbose" && echo " found package liburiparser" 1>&6 -echo "${as_me:-configure}:24052: testing found package liburiparser ..." 1>&5 +echo "${as_me:-configure}:24183: testing found package liburiparser ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "liburiparser" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "liburiparser" 2>/dev/null`" test -n "$verbose" && echo " package liburiparser CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:24058: testing package liburiparser CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:24189: testing package liburiparser CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package liburiparser LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:24062: testing package liburiparser LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:24193: testing package liburiparser LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in liburiparser +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -24175,57 +24320,285 @@ for cf_add_1lib in $cf_add_0lib; do done LIBS="$cf_add_libs" + cat >"conftest.$ac_ext" <<_ACEOF +#line 24324 "configure" +#include "confdefs.h" + +#include + +int +main (void) +{ + +#if URI_VER_MAJOR <= 0 && URI_VER_MINOR <= 9 && URI_VER_RELEASE <= 7 +#error "Please use liburiparser >= 0.9.8" +#endif /* URI_VER_MAJOR */ + + ; + return 0; +} +_ACEOF +rm -f "conftest.$ac_objext" +if { (eval echo "$as_me:24342: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:24345: \$? = $ac_status" >&5 + (exit "$ac_status"); } && + { ac_try='test -s "conftest.$ac_objext"' + { (eval echo "$as_me:24348: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:24351: \$? = $ac_status" >&5 + (exit "$ac_status"); }; }; then + have_liburiparser="yes" + if test x"$verbose" != "xyes" ; then + echo "$as_me:24355: result: $have_liburiparser" >&5 +echo "${ECHO_T}$have_liburiparser" >&6 + fi cat >>confdefs.h <<\EOF #define HAVE_LIBURIPARSER 1 EOF else + echo "$as_me: failed program was:" >&5 +cat "conftest.$ac_ext" >&5 +have_liburiparser="no" + LIBS=$cf_save_LIBS + CPPFLAGS=$cf_save_CPPFLAGS + echo "$as_me:24368: result: \tliburiparser too old (< 0.9.8)" >&5 +echo "${ECHO_T}\tliburiparser too old (< 0.9.8)" >&6 + +fi +rm -f "conftest.$ac_objext" "conftest.$ac_ext" +else cf_pkgconfig_incs= cf_pkgconfig_libs= + + have_liburiparser="no" + echo "$as_me:24378: result: $have_liburiparser" >&5 +echo "${ECHO_T}$have_liburiparser" >&6 + +fi + +fi + +# libcurl +if test "$enable_url_normalization" = "yes" && test "$have_liburiparser" = "no" || test "$enable_url_normalization" = "curl"; then + echo "$as_me:24387: checking for libcurl" >&5 +echo $ECHO_N "checking for libcurl... $ECHO_C" >&6 + cf_save_LIBS="$LIBS" + cf_save_CPPFLAGS="$CPPFLAGS" + +if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libcurl"; then + test -n "$verbose" && echo " found package libcurl" 1>&6 + +echo "${as_me:-configure}:24395: testing found package libcurl ..." 1>&5 + + cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libcurl" 2>/dev/null`" + cf_pkgconfig_libs="`$PKG_CONFIG --libs "libcurl" 2>/dev/null`" + test -n "$verbose" && echo " package libcurl CFLAGS: $cf_pkgconfig_incs" 1>&6 + +echo "${as_me:-configure}:24401: testing package libcurl CFLAGS: $cf_pkgconfig_incs ..." 1>&5 + + test -n "$verbose" && echo " package libcurl LIBS: $cf_pkgconfig_libs" 1>&6 + +echo "${as_me:-configure}:24405: testing package libcurl LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libcurl +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done + +cf_fix_cppflags=no +cf_new_cflags= +cf_new_cppflags= +cf_new_extra_cppflags= + +for cf_add_cflags in $cf_pkgconfig_incs +do +case "$cf_fix_cppflags" in +no) + case "$cf_add_cflags" in + -undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C) + case "$cf_add_cflags" in + -D*) + cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^-D[^=]*='\''\"[^"]*//'` + + test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \ + && test -z "${cf_tst_cflags}" \ + && cf_fix_cppflags=yes + + if test "$cf_fix_cppflags" = yes ; then + + test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags " + cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags" + + continue + elif test "${cf_tst_cflags}" = "\"'" ; then + + test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags " + cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags" + + continue + fi + ;; + esac + case "$CPPFLAGS" in + *$cf_add_cflags) + ;; + *) + case "$cf_add_cflags" in + -D*) + cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'` + +CPPFLAGS=`echo "$CPPFLAGS" | \ + sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \ + -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'` + + ;; + esac + + test -n "$cf_new_cppflags" && cf_new_cppflags="$cf_new_cppflags " + cf_new_cppflags="${cf_new_cppflags}$cf_add_cflags" + + ;; + esac + ;; + *) + + test -n "$cf_new_cflags" && cf_new_cflags="$cf_new_cflags " + cf_new_cflags="${cf_new_cflags}$cf_add_cflags" + + ;; + esac + ;; +yes) + + test -n "$cf_new_extra_cppflags" && cf_new_extra_cppflags="$cf_new_extra_cppflags " + cf_new_extra_cppflags="${cf_new_extra_cppflags}$cf_add_cflags" + + cf_tst_cflags=`echo "${cf_add_cflags}" |sed -e 's/^[^"]*"'\''//'` + + test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \ + && test -z "${cf_tst_cflags}" \ + && cf_fix_cppflags=no + ;; +esac +done + +if test -n "$cf_new_cflags" ; then + + test -n "$CFLAGS" && CFLAGS="$CFLAGS " + CFLAGS="${CFLAGS}$cf_new_cflags" + +fi + +if test -n "$cf_new_cppflags" ; then + + test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS " + CPPFLAGS="${CPPFLAGS}$cf_new_cppflags" + +fi + +if test -n "$cf_new_extra_cppflags" ; then + + test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS " + EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags" + +fi + +cf_add_libs="$LIBS" +# reverse order +cf_add_0lib= +for cf_add_1lib in $cf_pkgconfig_libs; do cf_add_0lib="$cf_add_1lib $cf_add_0lib"; done +# filter duplicates +for cf_add_1lib in $cf_add_0lib; do + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_add_1lib= + break + fi + done + test -n "$cf_add_1lib" && cf_add_libs="$cf_add_1lib $cf_add_libs" +done +LIBS="$cf_add_libs" + cat >"conftest.$ac_ext" <<_ACEOF -#line 24186 "configure" +#line 24536 "configure" #include "confdefs.h" -#include +#include int main (void) { -#if URI_VER_MAJOR = 0 && URI_VER_MINOR <= 9 && URI_VER_RELEASE <= 7 -#error "Please use liburiparser >= 0.9.8" -#endif /* URI_VER_MAJOR */ +#if !CURL_AT_LEAST_VERSION(7, 78, 0) +#error "Please use libcurl >= 7.78.0" +#endif ; return 0; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24204: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:24554: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24207: \$? = $ac_status" >&5 + echo "$as_me:24557: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24210: \"$ac_try\"") >&5 + { (eval echo "$as_me:24560: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24213: \$? = $ac_status" >&5 + echo "$as_me:24563: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - have_liburiparser=yes + + have_libcurl="yes" + if test x"$verbose" != "xyes" ; then + echo "$as_me:24568: result: $have_libcurl" >&5 +echo "${ECHO_T}$have_libcurl" >&6 + fi + cat >>confdefs.h <<\EOF +#define HAVE_LIBCURL 1 +EOF + else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -have_liburiparser=no - echo "$as_me:24220: result: $have_liburiparser" >&5 -echo "${ECHO_T}$have_liburiparser" >&6 + + have_libcurl="no" + LIBS=$cf_save_LIBS + CPPFLAGS=$cf_save_CPPFLAGS + echo "$as_me:24582: result: \tlibcurl too old (< 7.78.0" >&5 +echo "${ECHO_T}\tlibcurl too old (< 7.78.0" >&6 fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" +else + cf_pkgconfig_incs= + cf_pkgconfig_libs= + + have_libcurl="no" + echo "$as_me:24592: result: $have_libcurl" >&5 +echo "${ECHO_T}$have_libcurl" >&6 + +fi fi -echo "$as_me:24228: checking for function curses_version" >&5 +fi + +echo "$as_me:24601: checking for function curses_version" >&5 echo $ECHO_N "checking for function curses_version... $ECHO_C" >&6 if test "${cf_cv_func_curses_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24235,7 +24608,7 @@ if test "$cross_compiling" = yes; then cf_cv_func_curses_version=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 24238 "configure" +#line 24611 "configure" #include "confdefs.h" $ac_includes_default @@ -24244,22 +24617,22 @@ $ac_includes_default int main(void) { - char temp[1024]; - sprintf(temp, "%.999s\\n", curses_version()); - ${cf_cv_main_return:-return}(0); + char temp[1024]; + sprintf(temp, "%.999s\\n", curses_version()); + ${cf_cv_main_return:-return}(0); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:24254: \"$ac_link\"") >&5 +if { (eval echo "$as_me:24627: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:24257: \$? = $ac_status" >&5 + echo "$as_me:24630: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:24259: \"$ac_try\"") >&5 + { (eval echo "$as_me:24632: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24262: \$? = $ac_status" >&5 + echo "$as_me:24635: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_func_curses_version=yes @@ -24274,7 +24647,7 @@ rm -f core ./core.* ./*.core "conftest$a fi rm -f core fi -echo "$as_me:24277: result: $cf_cv_func_curses_version" >&5 +echo "$as_me:24650: result: $cf_cv_func_curses_version" >&5 echo "${ECHO_T}$cf_cv_func_curses_version" >&6 test "$cf_cv_func_curses_version" = yes && cat >>confdefs.h <<\EOF @@ -24282,7 +24655,7 @@ cat >>confdefs.h <<\EOF EOF ### checks for operator characteristics (should be the last option) -echo "$as_me:24285: checking whether to make a coffee while compiling" >&5 +echo "$as_me:24658: checking whether to make a coffee while compiling" >&5 echo $ECHO_N "checking whether to make a coffee while compiling... $ECHO_C" >&6 # Check whether --with-coffee or --without-coffee was given. @@ -24290,7 +24663,7 @@ if test "${with_coffee+set}" = set; then withval="$with_coffee" case "$withval" in yes) - echo "$as_me:24293: result: yes - with milk - please!" >&5 + echo "$as_me:24666: result: yes - with milk - please!" >&5 echo "${ECHO_T}yes - with milk - please!" >&6 cat >>confdefs.h <<\EOF @@ -24299,17 +24672,17 @@ EOF ;; *) - echo "$as_me:24302: result: no" >&5 + echo "$as_me:24675: result: no" >&5 echo "${ECHO_T}no" >&6 ;; esac else - echo "$as_me:24307: result: no" >&5 + echo "$as_me:24680: result: no" >&5 echo "${ECHO_T}no" >&6 fi; ### checks for compiler characteristics -echo "$as_me:24312: checking for fgrep" >&5 +echo "$as_me:24685: checking for fgrep" >&5 echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 if test "${ac_cv_path_FGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24321,7 +24694,7 @@ else do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:24324: checking for $ac_word" >&5 +echo "$as_me:24697: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_FGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24338,7 +24711,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if $as_executable_p "$ac_dir/$ac_word"; then ac_cv_path_FGREP="$ac_dir/$ac_word" - echo "$as_me:24341: found $ac_dir/$ac_word" >&5 + echo "$as_me:24714: found $ac_dir/$ac_word" >&5 break fi done @@ -24349,10 +24722,10 @@ fi FGREP=$ac_cv_path_FGREP if test -n "$FGREP"; then - echo "$as_me:24352: result: $FGREP" >&5 + echo "$as_me:24725: result: $FGREP" >&5 echo "${ECHO_T}$FGREP" >&6 else - echo "$as_me:24355: result: no" >&5 + echo "$as_me:24728: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -24360,21 +24733,23 @@ fi done test -n "$FGREP" || FGREP=": " - test "x$ac_cv_path_FGREP" = "x:" && { { echo "$as_me:24363: error: cannot find workable fgrep" >&5 + test "x$ac_cv_path_FGREP" = "x:" && { { echo "$as_me:24736: error: cannot find workable fgrep" >&5 echo "$as_me: error: cannot find workable fgrep" >&2;} { (exit 1); exit 1; }; } fi fi -echo "$as_me:24368: result: $ac_cv_path_FGREP" >&5 +echo "$as_me:24741: result: $ac_cv_path_FGREP" >&5 echo "${ECHO_T}$ac_cv_path_FGREP" >&6 FGREP="$ac_cv_path_FGREP" -echo "$as_me:24372: checking for makeflags variable" >&5 +echo "$as_me:24745: checking for makeflags variable" >&5 echo $ECHO_N "checking for makeflags variable... $ECHO_C" >&6 if test "${cf_cv_makeflags+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else + cf_save_makeflags="$MAKEFLAGS"; unset MAKEFLAGS + cf_save_mflags="$MFLAGS"; unset MFLAGS cf_cv_makeflags='' for cf_option in '-${MAKEFLAGS}' '${MFLAGS}' do @@ -24399,15 +24774,17 @@ CF_EOF ;; *) -echo "${as_me:-configure}:24402: testing given option \"$cf_option\",no match \"$cf_result\" ..." 1>&5 +echo "${as_me:-configure}:24777: testing given option \"$cf_option\",no match \"$cf_result\" ..." 1>&5 ;; esac done + test -n "$cf_save_makeflags" && MAKEFLAGS="$cf_save_makeflags" + test -n "$cf_save_mflags" && MFLAGS="$cf_save_mflags" rm -f cf_makeflags.tmp fi -echo "$as_me:24410: result: $cf_cv_makeflags" >&5 +echo "$as_me:24787: result: $cf_cv_makeflags" >&5 echo "${ECHO_T}$cf_cv_makeflags" >&6 ac_ext=c @@ -24417,13 +24794,13 @@ ac_link='$CC -o "conftest$ac_exeext" $CF ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_main_return="return" -echo "$as_me:24420: checking for an ANSI C-conforming const" >&5 +echo "$as_me:24797: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24426 "configure" +#line 24803 "configure" #include "confdefs.h" int @@ -24433,13 +24810,13 @@ main (void) #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; - const charset x; (void)x; + const charset x; /* SunOS 4.1.1 cc rejects this. */ char const *const *ccp; char **p; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; - static struct point const zero = {0,0}; (void)zero; + static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant @@ -24455,7 +24832,7 @@ main (void) char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; - (void)s; + (void)s; (void)x; (void)zero; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; @@ -24485,16 +24862,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24488: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:24865: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24491: \$? = $ac_status" >&5 + echo "$as_me:24868: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24494: \"$ac_try\"") >&5 + { (eval echo "$as_me:24871: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24497: \$? = $ac_status" >&5 + echo "$as_me:24874: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_c_const=yes else @@ -24504,7 +24881,7 @@ ac_cv_c_const=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:24507: result: $ac_cv_c_const" >&5 +echo "$as_me:24884: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then @@ -24514,7 +24891,7 @@ EOF fi -echo "$as_me:24517: checking for inline" >&5 +echo "$as_me:24894: checking for inline" >&5 echo $ECHO_N "checking for inline... $ECHO_C" >&6 if test "${ac_cv_c_inline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24522,7 +24899,7 @@ else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >"conftest.$ac_ext" <<_ACEOF -#line 24525 "configure" +#line 24902 "configure" #include "confdefs.h" #ifndef __cplusplus static $ac_kw int static_foo (void) {return 0; } @@ -24531,16 +24908,16 @@ $ac_kw int foo (void) {return 0; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24534: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:24911: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24537: \$? = $ac_status" >&5 + echo "$as_me:24914: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24540: \"$ac_try\"") >&5 + { (eval echo "$as_me:24917: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24543: \$? = $ac_status" >&5 + echo "$as_me:24920: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_c_inline=$ac_kw; break else @@ -24551,7 +24928,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:24554: result: $ac_cv_c_inline" >&5 +echo "$as_me:24931: result: $ac_cv_c_inline" >&5 echo "${ECHO_T}$ac_cv_c_inline" >&6 case $ac_cv_c_inline in inline | yes) ;; @@ -24566,14 +24943,14 @@ EOF ;; esac -echo "$as_me:24569: checking for ansi token expansion/substitution" >&5 +echo "$as_me:24946: checking for ansi token expansion/substitution" >&5 echo $ECHO_N "checking for ansi token expansion/substitution... $ECHO_C" >&6 if test "${cf_cv_cpp_expands+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24576 "configure" +#line 24953 "configure" #include "confdefs.h" #define string(n) #n @@ -24586,16 +24963,16 @@ const char *s = string(token); (void)s } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24589: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:24966: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24592: \$? = $ac_status" >&5 + echo "$as_me:24969: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24595: \"$ac_try\"") >&5 + { (eval echo "$as_me:24972: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24598: \$? = $ac_status" >&5 + echo "$as_me:24975: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_cpp_expands=yes else @@ -24607,21 +24984,21 @@ rm -f "conftest.$ac_objext" "conftest.$a fi -echo "$as_me:24610: result: $cf_cv_cpp_expands" >&5 +echo "$as_me:24987: result: $cf_cv_cpp_expands" >&5 echo "${ECHO_T}$cf_cv_cpp_expands" >&6 test $cf_cv_cpp_expands = yes && cat >>confdefs.h <<\EOF #define CPP_DOES_EXPAND 1 EOF -echo "$as_me:24617: checking for ansi token concatenation" >&5 +echo "$as_me:24994: checking for ansi token concatenation" >&5 echo $ECHO_N "checking for ansi token concatenation... $ECHO_C" >&6 if test "${cf_cv_cpp_concats+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24624 "configure" +#line 25001 "configure" #include "confdefs.h" #define concat(a,b) a ## b @@ -24636,16 +25013,16 @@ static char *firstlast = "y"; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24639: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25016: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24642: \$? = $ac_status" >&5 + echo "$as_me:25019: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24645: \"$ac_try\"") >&5 + { (eval echo "$as_me:25022: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24648: \$? = $ac_status" >&5 + echo "$as_me:25025: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_cpp_concats=yes else @@ -24657,21 +25034,21 @@ rm -f "conftest.$ac_objext" "conftest.$a fi -echo "$as_me:24660: result: $cf_cv_cpp_concats" >&5 +echo "$as_me:25037: result: $cf_cv_cpp_concats" >&5 echo "${ECHO_T}$cf_cv_cpp_concats" >&6 test $cf_cv_cpp_concats = yes && cat >>confdefs.h <<\EOF #define CPP_DOES_CONCAT 1 EOF -echo "$as_me:24667: checking if nested parameters work" >&5 +echo "$as_me:25044: checking if nested parameters work" >&5 echo $ECHO_N "checking if nested parameters work... $ECHO_C" >&6 if test "${cf_cv_nested_params+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24674 "configure" +#line 25051 "configure" #include "confdefs.h" extern void (*sigdisp(int sig, void (*func)(int sig)))(int sig); @@ -24685,16 +25062,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24688: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25065: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24691: \$? = $ac_status" >&5 + echo "$as_me:25068: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24694: \"$ac_try\"") >&5 + { (eval echo "$as_me:25071: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24697: \$? = $ac_status" >&5 + echo "$as_me:25074: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_nested_params=yes else @@ -24706,7 +25083,7 @@ rm -f "conftest.$ac_objext" "conftest.$a fi -echo "$as_me:24709: result: $cf_cv_nested_params" >&5 +echo "$as_me:25086: result: $cf_cv_nested_params" >&5 echo "${ECHO_T}$cf_cv_nested_params" >&6 test $cf_cv_nested_params = yes && cat >>confdefs.h <<\EOF @@ -24714,13 +25091,13 @@ cat >>confdefs.h <<\EOF EOF ### Checks for header files. -echo "$as_me:24717: checking for ANSI C header files" >&5 +echo "$as_me:25094: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24723 "configure" +#line 25100 "configure" #include "confdefs.h" #include #include @@ -24728,13 +25105,13 @@ else #include _ACEOF -if { (eval echo "$as_me:24731: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:25108: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:24737: \$? = $ac_status" >&5 + echo "$as_me:25114: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -24756,7 +25133,7 @@ rm -f conftest.err "conftest.$ac_ext" if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >"conftest.$ac_ext" <<_ACEOF -#line 24759 "configure" +#line 25136 "configure" #include "confdefs.h" #include @@ -24774,7 +25151,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >"conftest.$ac_ext" <<_ACEOF -#line 24777 "configure" +#line 25154 "configure" #include "confdefs.h" #include @@ -24795,7 +25172,7 @@ if test $ac_cv_header_stdc = yes; then : else cat >"conftest.$ac_ext" <<_ACEOF -#line 24798 "configure" +#line 25175 "configure" #include "confdefs.h" #include #if ((' ' & 0x0FF) == 0x020) @@ -24821,15 +25198,15 @@ main (void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:24824: \"$ac_link\"") >&5 +if { (eval echo "$as_me:25201: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:24827: \$? = $ac_status" >&5 + echo "$as_me:25204: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:24829: \"$ac_try\"") >&5 + { (eval echo "$as_me:25206: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24832: \$? = $ac_status" >&5 + echo "$as_me:25209: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -24842,7 +25219,7 @@ rm -f core ./core.* ./*.core "conftest$a fi fi fi -echo "$as_me:24845: result: $ac_cv_header_stdc" >&5 +echo "$as_me:25222: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then @@ -24855,13 +25232,13 @@ fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -echo "$as_me:24858: checking for $ac_hdr that defines DIR" >&5 +echo "$as_me:25235: checking for $ac_hdr that defines DIR" >&5 echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 24864 "configure" +#line 25241 "configure" #include "confdefs.h" #include #include <$ac_hdr> @@ -24876,16 +25253,16 @@ return 0; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:24879: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25256: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:24882: \$? = $ac_status" >&5 + echo "$as_me:25259: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:24885: \"$ac_try\"") >&5 + { (eval echo "$as_me:25262: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24888: \$? = $ac_status" >&5 + echo "$as_me:25265: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_Header=yes" else @@ -24895,7 +25272,7 @@ eval "$as_ac_Header=no" fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:24898: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:25275: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 + echo "$as_me:25288: checking for opendir in -ldir" >&5 echo $ECHO_N "checking for opendir in -ldir... $ECHO_C" >&6 if test "${ac_cv_lib_dir_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24916,7 +25293,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-ldir $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 24919 "configure" +#line 25296 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -24935,16 +25312,16 @@ opendir (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:24938: \"$ac_link\"") >&5 +if { (eval echo "$as_me:25315: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:24941: \$? = $ac_status" >&5 + echo "$as_me:25318: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:24944: \"$ac_try\"") >&5 + { (eval echo "$as_me:25321: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:24947: \$? = $ac_status" >&5 + echo "$as_me:25324: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_dir_opendir=yes else @@ -24955,14 +25332,14 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:24958: result: $ac_cv_lib_dir_opendir" >&5 +echo "$as_me:25335: result: $ac_cv_lib_dir_opendir" >&5 echo "${ECHO_T}$ac_cv_lib_dir_opendir" >&6 if test "$ac_cv_lib_dir_opendir" = yes; then LIBS="$LIBS -ldir" fi else - echo "$as_me:24965: checking for opendir in -lx" >&5 + echo "$as_me:25342: checking for opendir in -lx" >&5 echo $ECHO_N "checking for opendir in -lx... $ECHO_C" >&6 if test "${ac_cv_lib_x_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -24970,7 +25347,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lx $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 24973 "configure" +#line 25350 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -24989,16 +25366,16 @@ opendir (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:24992: \"$ac_link\"") >&5 +if { (eval echo "$as_me:25369: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:24995: \$? = $ac_status" >&5 + echo "$as_me:25372: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:24998: \"$ac_try\"") >&5 + { (eval echo "$as_me:25375: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25001: \$? = $ac_status" >&5 + echo "$as_me:25378: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_x_opendir=yes else @@ -25009,7 +25386,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:25012: result: $ac_cv_lib_x_opendir" >&5 +echo "$as_me:25389: result: $ac_cv_lib_x_opendir" >&5 echo "${ECHO_T}$ac_cv_lib_x_opendir" >&6 if test "$ac_cv_lib_x_opendir" = yes; then LIBS="$LIBS -lx" @@ -25017,13 +25394,13 @@ fi fi -echo "$as_me:25020: checking whether time.h and sys/time.h may both be included" >&5 +echo "$as_me:25397: checking whether time.h and sys/time.h may both be included" >&5 echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 if test "${ac_cv_header_time+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25026 "configure" +#line 25403 "configure" #include "confdefs.h" #include #include @@ -25039,16 +25416,16 @@ return 0; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25042: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25419: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25045: \$? = $ac_status" >&5 + echo "$as_me:25422: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25048: \"$ac_try\"") >&5 + { (eval echo "$as_me:25425: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25051: \$? = $ac_status" >&5 + echo "$as_me:25428: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_header_time=yes else @@ -25058,7 +25435,7 @@ ac_cv_header_time=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:25061: result: $ac_cv_header_time" >&5 +echo "$as_me:25438: result: $ac_cv_header_time" >&5 echo "${ECHO_T}$ac_cv_header_time" >&6 if test $ac_cv_header_time = yes; then @@ -25068,13 +25445,13 @@ EOF fi -echo "$as_me:25071: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo "$as_me:25448: checking for sys/wait.h that is POSIX.1 compatible" >&5 echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6 if test "${ac_cv_header_sys_wait_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25077 "configure" +#line 25454 "configure" #include "confdefs.h" #include #include @@ -25096,16 +25473,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25099: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25476: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25102: \$? = $ac_status" >&5 + echo "$as_me:25479: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25105: \"$ac_try\"") >&5 + { (eval echo "$as_me:25482: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25108: \$? = $ac_status" >&5 + echo "$as_me:25485: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_header_sys_wait_h=yes else @@ -25115,7 +25492,7 @@ ac_cv_header_sys_wait_h=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:25118: result: $ac_cv_header_sys_wait_h" >&5 +echo "$as_me:25495: result: $ac_cv_header_sys_wait_h" >&5 echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 if test $ac_cv_header_sys_wait_h = yes; then @@ -25141,6 +25518,7 @@ for cf_hdr in \ malloc.h \ netdb.h \ netinet/in.h \ + netinet/tcp.h \ netlib.h \ nl_types.h \ nomacros.h \ @@ -25183,23 +25561,23 @@ for cf_hdr in \ wctype.h \ do - echo "$as_me:25186: checking for $cf_hdr" >&5 + echo "$as_me:25564: checking for $cf_hdr" >&5 echo $ECHO_N "checking for $cf_hdr... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 25189 "configure" +#line 25567 "configure" #include "confdefs.h" #include #include <$cf_hdr> _ACEOF -if { (eval echo "$as_me:25196: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:25574: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:25202: \$? = $ac_status" >&5 + echo "$as_me:25580: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -25217,7 +25595,7 @@ else cf_found=no fi rm -f conftest.err "conftest.$ac_ext" -echo "$as_me:25220: result: $cf_found" >&5 +echo "$as_me:25598: result: $cf_found" >&5 echo "${ECHO_T}$cf_found" >&6 if test $cf_found = yes ; then @@ -25232,7 +25610,7 @@ done ### Checks that depend on existence-checks for headers -for ac_header in \ +for ac_header in sgtty.h \ termio.h \ termios.h \ unistd.h \ @@ -25241,23 +25619,23 @@ sys/termio.h \ do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:25244: checking for $ac_header" >&5 +echo "$as_me:25622: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25250 "configure" +#line 25628 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:25254: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:25632: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:25260: \$? = $ac_status" >&5 + echo "$as_me:25638: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -25276,7 +25654,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:25279: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:25657: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 + echo "$as_me:25674: checking whether termios.h needs _POSIX_SOURCE" >&5 echo $ECHO_N "checking whether termios.h needs _POSIX_SOURCE... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 25299 "configure" +#line 25677 "configure" #include "confdefs.h" #include int @@ -25308,16 +25686,16 @@ struct termios foo; int x = (int)(foo.c_ } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25311: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25689: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25314: \$? = $ac_status" >&5 + echo "$as_me:25692: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25317: \"$ac_try\"") >&5 + { (eval echo "$as_me:25695: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25320: \$? = $ac_status" >&5 + echo "$as_me:25698: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then termios_bad=no else @@ -25325,7 +25703,7 @@ else cat "conftest.$ac_ext" >&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 25328 "configure" +#line 25706 "configure" #include "confdefs.h" #define _POSIX_SOURCE @@ -25339,16 +25717,16 @@ struct termios foo; int x = (int)(foo.c_ } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25342: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25720: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25345: \$? = $ac_status" >&5 + echo "$as_me:25723: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25348: \"$ac_try\"") >&5 + { (eval echo "$as_me:25726: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25351: \$? = $ac_status" >&5 + echo "$as_me:25729: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then termios_bad=unknown else @@ -25364,12 +25742,12 @@ rm -f "conftest.$ac_objext" "conftest.$a fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:25367: result: $termios_bad" >&5 + echo "$as_me:25745: result: $termios_bad" >&5 echo "${ECHO_T}$termios_bad" >&6 fi fi -echo "$as_me:25372: checking declaration of size-change" >&5 +echo "$as_me:25750: checking declaration of size-change" >&5 echo $ECHO_N "checking declaration of size-change... $ECHO_C" >&6 if test "${cf_cv_sizechange+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -25390,7 +25768,7 @@ do fi cat >"conftest.$ac_ext" <<_ACEOF -#line 25393 "configure" +#line 25771 "configure" #include "confdefs.h" #include #ifdef HAVE_TERMIOS_H @@ -25440,16 +25818,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25443: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25821: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25446: \$? = $ac_status" >&5 + echo "$as_me:25824: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25449: \"$ac_try\"") >&5 + { (eval echo "$as_me:25827: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25452: \$? = $ac_status" >&5 + echo "$as_me:25830: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sizechange=yes else @@ -25468,7 +25846,7 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:25471: result: $cf_cv_sizechange" >&5 +echo "$as_me:25849: result: $cf_cv_sizechange" >&5 echo "${ECHO_T}$cf_cv_sizechange" >&6 if test "$cf_cv_sizechange" != no ; then @@ -25486,7 +25864,7 @@ EOF esac fi -echo "$as_me:25489: checking if sys/time.h conflicts with sys/select.h" >&5 +echo "$as_me:25867: checking if sys/time.h conflicts with sys/select.h" >&5 echo $ECHO_N "checking if sys/time.h conflicts with sys/select.h... $ECHO_C" >&6 if test "${cf_cv_sys_select_timeval+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -25495,7 +25873,7 @@ else for cf_opts in no yes do cat >"conftest.$ac_ext" <<_ACEOF -#line 25498 "configure" +#line 25876 "configure" #include "confdefs.h" #define yes 1 @@ -25528,16 +25906,16 @@ struct timeval foo; (void)foo } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25531: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:25909: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25534: \$? = $ac_status" >&5 + echo "$as_me:25912: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25537: \"$ac_try\"") >&5 + { (eval echo "$as_me:25915: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25540: \$? = $ac_status" >&5 + echo "$as_me:25918: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sys_select_timeval=$cf_opts break @@ -25551,21 +25929,21 @@ done fi -echo "$as_me:25554: result: $cf_cv_sys_select_timeval" >&5 +echo "$as_me:25932: result: $cf_cv_sys_select_timeval" >&5 echo "${ECHO_T}$cf_cv_sys_select_timeval" >&6 test $cf_cv_sys_select_timeval = yes && cat >>confdefs.h <<\EOF #define NEED_TIMEVAL_FIX 1 EOF -echo "$as_me:25561: checking for va_copy" >&5 +echo "$as_me:25939: checking for va_copy" >&5 echo $ECHO_N "checking for va_copy... $ECHO_C" >&6 if test "${cf_cv_have_va_copy+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25568 "configure" +#line 25946 "configure" #include "confdefs.h" #include @@ -25582,16 +25960,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:25585: \"$ac_link\"") >&5 +if { (eval echo "$as_me:25963: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:25588: \$? = $ac_status" >&5 + echo "$as_me:25966: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:25591: \"$ac_try\"") >&5 + { (eval echo "$as_me:25969: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25594: \$? = $ac_status" >&5 + echo "$as_me:25972: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have_va_copy=yes else @@ -25601,7 +25979,7 @@ cf_cv_have_va_copy=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:25604: result: $cf_cv_have_va_copy" >&5 +echo "$as_me:25982: result: $cf_cv_have_va_copy" >&5 echo "${ECHO_T}$cf_cv_have_va_copy" >&6 if test "$cf_cv_have_va_copy" = yes; @@ -25613,14 +25991,14 @@ EOF else # !cf_cv_have_va_copy -echo "$as_me:25616: checking for __va_copy" >&5 +echo "$as_me:25994: checking for __va_copy" >&5 echo $ECHO_N "checking for __va_copy... $ECHO_C" >&6 if test "${cf_cv_have___va_copy+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25623 "configure" +#line 26001 "configure" #include "confdefs.h" #include @@ -25637,16 +26015,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:25640: \"$ac_link\"") >&5 +if { (eval echo "$as_me:26018: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:25643: \$? = $ac_status" >&5 + echo "$as_me:26021: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:25646: \"$ac_try\"") >&5 + { (eval echo "$as_me:26024: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25649: \$? = $ac_status" >&5 + echo "$as_me:26027: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have___va_copy=yes else @@ -25656,7 +26034,7 @@ cf_cv_have___va_copy=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:25659: result: $cf_cv_have___va_copy" >&5 +echo "$as_me:26037: result: $cf_cv_have___va_copy" >&5 echo "${ECHO_T}$cf_cv_have___va_copy" >&6 if test "$cf_cv_have___va_copy" = yes @@ -25668,14 +26046,14 @@ EOF else # !cf_cv_have___va_copy -echo "$as_me:25671: checking for __builtin_va_copy" >&5 +echo "$as_me:26049: checking for __builtin_va_copy" >&5 echo $ECHO_N "checking for __builtin_va_copy... $ECHO_C" >&6 if test "${cf_cv_have___builtin_va_copy+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25678 "configure" +#line 26056 "configure" #include "confdefs.h" #include @@ -25692,16 +26070,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:25695: \"$ac_link\"") >&5 +if { (eval echo "$as_me:26073: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:25698: \$? = $ac_status" >&5 + echo "$as_me:26076: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:25701: \"$ac_try\"") >&5 + { (eval echo "$as_me:26079: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25704: \$? = $ac_status" >&5 + echo "$as_me:26082: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have___builtin_va_copy=yes else @@ -25711,7 +26089,7 @@ cf_cv_have___builtin_va_copy=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:25714: result: $cf_cv_have___builtin_va_copy" >&5 +echo "$as_me:26092: result: $cf_cv_have___builtin_va_copy" >&5 echo "${ECHO_T}$cf_cv_have___builtin_va_copy" >&6 test "$cf_cv_have___builtin_va_copy" = yes && @@ -25729,14 +26107,14 @@ case "${cf_cv_have_va_copy}${cf_cv_have_ ;; *) - echo "$as_me:25732: checking if we can simply copy va_list" >&5 + echo "$as_me:26110: checking if we can simply copy va_list" >&5 echo $ECHO_N "checking if we can simply copy va_list... $ECHO_C" >&6 if test "${cf_cv_pointer_va_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25739 "configure" +#line 26117 "configure" #include "confdefs.h" #include @@ -25753,16 +26131,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:25756: \"$ac_link\"") >&5 +if { (eval echo "$as_me:26134: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:25759: \$? = $ac_status" >&5 + echo "$as_me:26137: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:25762: \"$ac_try\"") >&5 + { (eval echo "$as_me:26140: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25765: \$? = $ac_status" >&5 + echo "$as_me:26143: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_pointer_va_list=yes else @@ -25772,19 +26150,19 @@ cf_cv_pointer_va_list=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:25775: result: $cf_cv_pointer_va_list" >&5 +echo "$as_me:26153: result: $cf_cv_pointer_va_list" >&5 echo "${ECHO_T}$cf_cv_pointer_va_list" >&6 if test "$cf_cv_pointer_va_list" = no then - echo "$as_me:25780: checking if we can copy va_list indirectly" >&5 + echo "$as_me:26158: checking if we can copy va_list indirectly" >&5 echo $ECHO_N "checking if we can copy va_list indirectly... $ECHO_C" >&6 if test "${cf_cv_array_va_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25787 "configure" +#line 26165 "configure" #include "confdefs.h" #include @@ -25801,16 +26179,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:25804: \"$ac_link\"") >&5 +if { (eval echo "$as_me:26182: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:25807: \$? = $ac_status" >&5 + echo "$as_me:26185: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:25810: \"$ac_try\"") >&5 + { (eval echo "$as_me:26188: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25813: \$? = $ac_status" >&5 + echo "$as_me:26191: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_array_va_list=yes else @@ -25820,7 +26198,7 @@ cf_cv_array_va_list=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:25823: result: $cf_cv_array_va_list" >&5 +echo "$as_me:26201: result: $cf_cv_array_va_list" >&5 echo "${ECHO_T}$cf_cv_array_va_list" >&6 test "$cf_cv_array_va_list" = yes && cat >>confdefs.h <<\EOF @@ -25832,13 +26210,13 @@ EOF esac ### Checks for Datatypes. -echo "$as_me:25835: checking for gid_t" >&5 +echo "$as_me:26213: checking for gid_t" >&5 echo $ECHO_N "checking for gid_t... $ECHO_C" >&6 if test "${ac_cv_type_gid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25841 "configure" +#line 26219 "configure" #include "confdefs.h" $ac_includes_default int @@ -25853,16 +26231,16 @@ if (sizeof (gid_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25856: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26234: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25859: \$? = $ac_status" >&5 + echo "$as_me:26237: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25862: \"$ac_try\"") >&5 + { (eval echo "$as_me:26240: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25865: \$? = $ac_status" >&5 + echo "$as_me:26243: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_gid_t=yes else @@ -25872,7 +26250,7 @@ ac_cv_type_gid_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:25875: result: $ac_cv_type_gid_t" >&5 +echo "$as_me:26253: result: $ac_cv_type_gid_t" >&5 echo "${ECHO_T}$ac_cv_type_gid_t" >&6 if test "$ac_cv_type_gid_t" = yes; then : @@ -25884,13 +26262,13 @@ EOF fi -echo "$as_me:25887: checking for mode_t" >&5 +echo "$as_me:26265: checking for mode_t" >&5 echo $ECHO_N "checking for mode_t... $ECHO_C" >&6 if test "${ac_cv_type_mode_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25893 "configure" +#line 26271 "configure" #include "confdefs.h" $ac_includes_default int @@ -25905,16 +26283,16 @@ if (sizeof (mode_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25908: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26286: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25911: \$? = $ac_status" >&5 + echo "$as_me:26289: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25914: \"$ac_try\"") >&5 + { (eval echo "$as_me:26292: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25917: \$? = $ac_status" >&5 + echo "$as_me:26295: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_mode_t=yes else @@ -25924,7 +26302,7 @@ ac_cv_type_mode_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:25927: result: $ac_cv_type_mode_t" >&5 +echo "$as_me:26305: result: $ac_cv_type_mode_t" >&5 echo "${ECHO_T}$ac_cv_type_mode_t" >&6 if test "$ac_cv_type_mode_t" = yes; then : @@ -25936,13 +26314,13 @@ EOF fi -echo "$as_me:25939: checking for off_t" >&5 +echo "$as_me:26317: checking for off_t" >&5 echo $ECHO_N "checking for off_t... $ECHO_C" >&6 if test "${ac_cv_type_off_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25945 "configure" +#line 26323 "configure" #include "confdefs.h" $ac_includes_default int @@ -25957,16 +26335,16 @@ if (sizeof (off_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:25960: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26338: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:25963: \$? = $ac_status" >&5 + echo "$as_me:26341: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:25966: \"$ac_try\"") >&5 + { (eval echo "$as_me:26344: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:25969: \$? = $ac_status" >&5 + echo "$as_me:26347: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_off_t=yes else @@ -25976,7 +26354,7 @@ ac_cv_type_off_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:25979: result: $ac_cv_type_off_t" >&5 +echo "$as_me:26357: result: $ac_cv_type_off_t" >&5 echo "${ECHO_T}$ac_cv_type_off_t" >&6 if test "$ac_cv_type_off_t" = yes; then : @@ -25988,13 +26366,13 @@ EOF fi -echo "$as_me:25991: checking for pid_t" >&5 +echo "$as_me:26369: checking for pid_t" >&5 echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 if test "${ac_cv_type_pid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 25997 "configure" +#line 26375 "configure" #include "confdefs.h" $ac_includes_default int @@ -26009,16 +26387,16 @@ if (sizeof (pid_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26012: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26390: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26015: \$? = $ac_status" >&5 + echo "$as_me:26393: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26018: \"$ac_try\"") >&5 + { (eval echo "$as_me:26396: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26021: \$? = $ac_status" >&5 + echo "$as_me:26399: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_pid_t=yes else @@ -26028,7 +26406,7 @@ ac_cv_type_pid_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26031: result: $ac_cv_type_pid_t" >&5 +echo "$as_me:26409: result: $ac_cv_type_pid_t" >&5 echo "${ECHO_T}$ac_cv_type_pid_t" >&6 if test "$ac_cv_type_pid_t" = yes; then : @@ -26040,13 +26418,13 @@ EOF fi -echo "$as_me:26043: checking for size_t" >&5 +echo "$as_me:26421: checking for size_t" >&5 echo $ECHO_N "checking for size_t... $ECHO_C" >&6 if test "${ac_cv_type_size_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26049 "configure" +#line 26427 "configure" #include "confdefs.h" $ac_includes_default int @@ -26061,16 +26439,16 @@ if (sizeof (size_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26064: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26442: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26067: \$? = $ac_status" >&5 + echo "$as_me:26445: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26070: \"$ac_try\"") >&5 + { (eval echo "$as_me:26448: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26073: \$? = $ac_status" >&5 + echo "$as_me:26451: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_size_t=yes else @@ -26080,7 +26458,7 @@ ac_cv_type_size_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26083: result: $ac_cv_type_size_t" >&5 +echo "$as_me:26461: result: $ac_cv_type_size_t" >&5 echo "${ECHO_T}$ac_cv_type_size_t" >&6 if test "$ac_cv_type_size_t" = yes; then : @@ -26092,13 +26470,13 @@ EOF fi -echo "$as_me:26095: checking for ssize_t" >&5 +echo "$as_me:26473: checking for ssize_t" >&5 echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6 if test "${ac_cv_type_ssize_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26101 "configure" +#line 26479 "configure" #include "confdefs.h" $ac_includes_default int @@ -26113,16 +26491,16 @@ if (sizeof (ssize_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26116: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26494: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26119: \$? = $ac_status" >&5 + echo "$as_me:26497: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26122: \"$ac_try\"") >&5 + { (eval echo "$as_me:26500: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26125: \$? = $ac_status" >&5 + echo "$as_me:26503: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_ssize_t=yes else @@ -26132,7 +26510,7 @@ ac_cv_type_ssize_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26135: result: $ac_cv_type_ssize_t" >&5 +echo "$as_me:26513: result: $ac_cv_type_ssize_t" >&5 echo "${ECHO_T}$ac_cv_type_ssize_t" >&6 if test "$ac_cv_type_ssize_t" = yes; then : @@ -26144,13 +26522,13 @@ EOF fi -echo "$as_me:26147: checking for time_t" >&5 +echo "$as_me:26525: checking for time_t" >&5 echo $ECHO_N "checking for time_t... $ECHO_C" >&6 if test "${ac_cv_type_time_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26153 "configure" +#line 26531 "configure" #include "confdefs.h" $ac_includes_default int @@ -26165,16 +26543,16 @@ if (sizeof (time_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26168: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26546: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26171: \$? = $ac_status" >&5 + echo "$as_me:26549: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26174: \"$ac_try\"") >&5 + { (eval echo "$as_me:26552: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26177: \$? = $ac_status" >&5 + echo "$as_me:26555: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_time_t=yes else @@ -26184,7 +26562,7 @@ ac_cv_type_time_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26187: result: $ac_cv_type_time_t" >&5 +echo "$as_me:26565: result: $ac_cv_type_time_t" >&5 echo "${ECHO_T}$ac_cv_type_time_t" >&6 if test "$ac_cv_type_time_t" = yes; then : @@ -26197,7 +26575,7 @@ EOF fi cat >"conftest.$ac_ext" <<_ACEOF -#line 26200 "configure" +#line 26578 "configure" #include "confdefs.h" #include @@ -26208,7 +26586,7 @@ if (eval "$ac_cpp conftest.$ac_ext") 2>& else cat >"conftest.$ac_ext" <<_ACEOF -#line 26211 "configure" +#line 26589 "configure" #include "confdefs.h" #include @@ -26218,13 +26596,13 @@ if (eval "$ac_cpp conftest.$ac_ext") 2>& : else - echo "$as_me:26221: checking for in_addr_t" >&5 + echo "$as_me:26599: checking for in_addr_t" >&5 echo $ECHO_N "checking for in_addr_t... $ECHO_C" >&6 if test "${ac_cv_type_in_addr_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26227 "configure" +#line 26605 "configure" #include "confdefs.h" $ac_includes_default int @@ -26239,16 +26617,16 @@ if (sizeof (in_addr_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26242: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26620: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26245: \$? = $ac_status" >&5 + echo "$as_me:26623: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26248: \"$ac_try\"") >&5 + { (eval echo "$as_me:26626: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26251: \$? = $ac_status" >&5 + echo "$as_me:26629: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_in_addr_t=yes else @@ -26258,7 +26636,7 @@ ac_cv_type_in_addr_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26261: result: $ac_cv_type_in_addr_t" >&5 +echo "$as_me:26639: result: $ac_cv_type_in_addr_t" >&5 echo "${ECHO_T}$ac_cv_type_in_addr_t" >&6 if test "$ac_cv_type_in_addr_t" = yes; then : @@ -26276,13 +26654,13 @@ rm -rf conftest* fi rm -rf conftest* -echo "$as_me:26279: checking for uid_t in sys/types.h" >&5 +echo "$as_me:26657: checking for uid_t in sys/types.h" >&5 echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 if test "${ac_cv_type_uid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26285 "configure" +#line 26663 "configure" #include "confdefs.h" #include @@ -26296,7 +26674,7 @@ fi rm -rf conftest* fi -echo "$as_me:26299: result: $ac_cv_type_uid_t" >&5 +echo "$as_me:26677: result: $ac_cv_type_uid_t" >&5 echo "${ECHO_T}$ac_cv_type_uid_t" >&6 if test $ac_cv_type_uid_t = no; then @@ -26310,27 +26688,27 @@ EOF fi -echo "$as_me:26313: checking for tcflag_t defined in termios.h" >&5 +echo "$as_me:26691: checking for tcflag_t defined in termios.h" >&5 echo $ECHO_N "checking for tcflag_t defined in termios.h... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26316 "configure" +#line 26694 "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "tcflag_t" >/dev/null 2>&1; then - echo "$as_me:26323: result: yes" >&5 + echo "$as_me:26701: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:26327: checking for tcflag_t" >&5 + echo "$as_me:26705: checking for tcflag_t" >&5 echo $ECHO_N "checking for tcflag_t... $ECHO_C" >&6 if test "${ac_cv_type_tcflag_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26333 "configure" +#line 26711 "configure" #include "confdefs.h" $ac_includes_default int @@ -26345,16 +26723,16 @@ if (sizeof (tcflag_t)) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26348: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26726: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26351: \$? = $ac_status" >&5 + echo "$as_me:26729: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26354: \"$ac_try\"") >&5 + { (eval echo "$as_me:26732: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26357: \$? = $ac_status" >&5 + echo "$as_me:26735: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_tcflag_t=yes else @@ -26364,7 +26742,7 @@ ac_cv_type_tcflag_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:26367: result: $ac_cv_type_tcflag_t" >&5 +echo "$as_me:26745: result: $ac_cv_type_tcflag_t" >&5 echo "${ECHO_T}$ac_cv_type_tcflag_t" >&6 if test "$ac_cv_type_tcflag_t" = yes; then : @@ -26379,10 +26757,10 @@ fi fi rm -rf conftest* -echo "$as_me:26382: checking for quad_t" >&5 +echo "$as_me:26760: checking for quad_t" >&5 echo $ECHO_N "checking for quad_t... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26385 "configure" +#line 26763 "configure" #include "confdefs.h" $ac_includes_default @@ -26396,16 +26774,16 @@ quad_t x; x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26399: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26777: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26402: \$? = $ac_status" >&5 + echo "$as_me:26780: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26405: \"$ac_try\"") >&5 + { (eval echo "$as_me:26783: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26408: \$? = $ac_status" >&5 + echo "$as_me:26786: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_quad_t=yes else @@ -26414,7 +26792,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_quad_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:26417: result: $ac_cv_quad_t" >&5 +echo "$as_me:26795: result: $ac_cv_quad_t" >&5 echo "${ECHO_T}$ac_cv_quad_t" >&6 if test $ac_cv_quad_t = yes; then @@ -26424,10 +26802,10 @@ EOF fi -echo "$as_me:26427: checking for long long" >&5 +echo "$as_me:26805: checking for long long" >&5 echo $ECHO_N "checking for long long... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26430 "configure" +#line 26808 "configure" #include "confdefs.h" $ac_includes_default @@ -26441,16 +26819,16 @@ long long x; x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26444: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26822: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26447: \$? = $ac_status" >&5 + echo "$as_me:26825: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26450: \"$ac_try\"") >&5 + { (eval echo "$as_me:26828: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26453: \$? = $ac_status" >&5 + echo "$as_me:26831: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_long_long=yes else @@ -26459,7 +26837,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_long_long=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:26462: result: $ac_cv_long_long" >&5 +echo "$as_me:26840: result: $ac_cv_long_long" >&5 echo "${ECHO_T}$ac_cv_long_long" >&6 if test $ac_cv_long_long = yes; then @@ -26469,10 +26847,10 @@ EOF fi -echo "$as_me:26472: checking for int_least64_t" >&5 +echo "$as_me:26850: checking for int_least64_t" >&5 echo $ECHO_N "checking for int_least64_t... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26475 "configure" +#line 26853 "configure" #include "confdefs.h" $ac_includes_default @@ -26486,16 +26864,16 @@ int_least64_t x; x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26489: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26867: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26492: \$? = $ac_status" >&5 + echo "$as_me:26870: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26495: \"$ac_try\"") >&5 + { (eval echo "$as_me:26873: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26498: \$? = $ac_status" >&5 + echo "$as_me:26876: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_int_least64_t=yes else @@ -26504,7 +26882,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_int_least64_t=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:26507: result: $ac_cv_int_least64_t" >&5 +echo "$as_me:26885: result: $ac_cv_int_least64_t" >&5 echo "${ECHO_T}$ac_cv_int_least64_t" >&6 if test $ac_cv_int_least64_t = yes; then @@ -26512,10 +26890,10 @@ cat >>confdefs.h <<\EOF #define HAVE_INT_LEAST64_T 1 EOF - echo "$as_me:26515: checking for INT64_C" >&5 + echo "$as_me:26893: checking for INT64_C" >&5 echo $ECHO_N "checking for INT64_C... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26518 "configure" +#line 26896 "configure" #include "confdefs.h" $ac_includes_default @@ -26529,16 +26907,16 @@ int_least64_t x; x = INT64_C(0); (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26532: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26910: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26535: \$? = $ac_status" >&5 + echo "$as_me:26913: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26538: \"$ac_try\"") >&5 + { (eval echo "$as_me:26916: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26541: \$? = $ac_status" >&5 + echo "$as_me:26919: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_int64_c=yes else @@ -26547,7 +26925,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_int64_c=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:26550: result: $ac_cv_int64_c" >&5 + echo "$as_me:26928: result: $ac_cv_int64_c" >&5 echo "${ECHO_T}$ac_cv_int64_c" >&6 if test $ac_cv_int64_c = yes; then @@ -26556,10 +26934,10 @@ cat >>confdefs.h <<\EOF EOF fi - echo "$as_me:26559: checking for PRIdLEAST64" >&5 + echo "$as_me:26937: checking for PRIdLEAST64" >&5 echo $ECHO_N "checking for PRIdLEAST64... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26562 "configure" +#line 26940 "configure" #include "confdefs.h" $ac_includes_default @@ -26576,16 +26954,16 @@ printf("%"PRIdLEAST64, (long int) 0); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26579: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:26957: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26582: \$? = $ac_status" >&5 + echo "$as_me:26960: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26585: \"$ac_try\"") >&5 + { (eval echo "$as_me:26963: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26588: \$? = $ac_status" >&5 + echo "$as_me:26966: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_pridleast64=yes else @@ -26594,7 +26972,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_pridleast64=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:26597: result: $ac_cv_pridleast64" >&5 + echo "$as_me:26975: result: $ac_cv_pridleast64" >&5 echo "${ECHO_T}$ac_cv_pridleast64" >&6 if test $ac_cv_pridleast64 = yes; then @@ -26603,10 +26981,10 @@ cat >>confdefs.h <<\EOF EOF fi - echo "$as_me:26606: checking for SCNdLEAST64" >&5 + echo "$as_me:26984: checking for SCNdLEAST64" >&5 echo $ECHO_N "checking for SCNdLEAST64... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26609 "configure" +#line 26987 "configure" #include "confdefs.h" $ac_includes_default @@ -26623,16 +27001,16 @@ printf("%"SCNdLEAST64, (long int) 0); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26626: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:27004: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26629: \$? = $ac_status" >&5 + echo "$as_me:27007: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26632: \"$ac_try\"") >&5 + { (eval echo "$as_me:27010: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26635: \$? = $ac_status" >&5 + echo "$as_me:27013: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_scndleast64=yes else @@ -26641,7 +27019,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_scndleast64=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:26644: result: $ac_cv_scndleast64" >&5 + echo "$as_me:27022: result: $ac_cv_scndleast64" >&5 echo "${ECHO_T}$ac_cv_scndleast64" >&6 if test $ac_cv_scndleast64 = yes; then @@ -26652,10 +27030,10 @@ EOF fi fi -echo "$as_me:26655: checking for nl_item" >&5 +echo "$as_me:27033: checking for nl_item" >&5 echo $ECHO_N "checking for nl_item... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 26658 "configure" +#line 27036 "configure" #include "confdefs.h" $ac_includes_default @@ -26676,16 +27054,16 @@ nl_item x; x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:26679: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:27057: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:26682: \$? = $ac_status" >&5 + echo "$as_me:27060: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:26685: \"$ac_try\"") >&5 + { (eval echo "$as_me:27063: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26688: \$? = $ac_status" >&5 + echo "$as_me:27066: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_nl_item=yes else @@ -26694,7 +27072,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_nl_item=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:26697: result: $ac_cv_nl_item" >&5 +echo "$as_me:27075: result: $ac_cv_nl_item" >&5 echo "${ECHO_T}$ac_cv_nl_item" >&6 if test $ac_cv_nl_item = yes; then @@ -26704,10 +27082,112 @@ EOF fi +echo "$as_me:27085: checking for sig_atomic_t" >&5 +echo $ECHO_N "checking for sig_atomic_t... $ECHO_C" >&6 +if test "${ac_cv_type_sig_atomic_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >"conftest.$ac_ext" <<_ACEOF +#line 27091 "configure" +#include "confdefs.h" + +#include +#include + +int +main (void) +{ +if ((sig_atomic_t *) 0) + return 0; +if (sizeof (sig_atomic_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f "conftest.$ac_objext" +if { (eval echo "$as_me:27109: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:27112: \$? = $ac_status" >&5 + (exit "$ac_status"); } && + { ac_try='test -s "conftest.$ac_objext"' + { (eval echo "$as_me:27115: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:27118: \$? = $ac_status" >&5 + (exit "$ac_status"); }; }; then + ac_cv_type_sig_atomic_t=yes +else + echo "$as_me: failed program was:" >&5 +cat "conftest.$ac_ext" >&5 +ac_cv_type_sig_atomic_t=no +fi +rm -f "conftest.$ac_objext" "conftest.$ac_ext" +fi +echo "$as_me:27128: result: $ac_cv_type_sig_atomic_t" >&5 +echo "${ECHO_T}$ac_cv_type_sig_atomic_t" >&6 +if test "$ac_cv_type_sig_atomic_t" = yes; then + +cat >>confdefs.h <&5 +echo $ECHO_N "checking for working volatile... $ECHO_C" >&6 +if test "${ac_cv_c_volatile+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >"conftest.$ac_ext" <<_ACEOF +#line 27144 "configure" +#include "confdefs.h" + +int +main (void) +{ + +volatile int x; +int * volatile y; + ; + return 0; +} +_ACEOF +rm -f "conftest.$ac_objext" +if { (eval echo "$as_me:27158: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:27161: \$? = $ac_status" >&5 + (exit "$ac_status"); } && + { ac_try='test -s "conftest.$ac_objext"' + { (eval echo "$as_me:27164: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:27167: \$? = $ac_status" >&5 + (exit "$ac_status"); }; }; then + ac_cv_c_volatile=yes +else + echo "$as_me: failed program was:" >&5 +cat "conftest.$ac_ext" >&5 +ac_cv_c_volatile=no +fi +rm -f "conftest.$ac_objext" "conftest.$ac_ext" +fi +echo "$as_me:27177: result: $ac_cv_c_volatile" >&5 +echo "${ECHO_T}$ac_cv_c_volatile" >&6 +if test $ac_cv_c_volatile = no; then + +cat >>confdefs.h <<\EOF +#define volatile +EOF + +fi + ### Checks for libraries. # libuu/uudeview # only define HAVE_LIBUU and HAVE_UUDEVIEW_H if both are found -echo "$as_me:26710: checking for UUInitialize in -luu" >&5 +echo "$as_me:27190: checking for UUInitialize in -luu" >&5 echo $ECHO_N "checking for UUInitialize in -luu... $ECHO_C" >&6 if test "${ac_cv_lib_uu_UUInitialize+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -26715,7 +27195,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-luu $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 26718 "configure" +#line 27198 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -26734,16 +27214,16 @@ UUInitialize (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:26737: \"$ac_link\"") >&5 +if { (eval echo "$as_me:27217: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:26740: \$? = $ac_status" >&5 + echo "$as_me:27220: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:26743: \"$ac_try\"") >&5 + { (eval echo "$as_me:27223: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26746: \$? = $ac_status" >&5 + echo "$as_me:27226: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_uu_UUInitialize=yes else @@ -26754,26 +27234,26 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:26757: result: $ac_cv_lib_uu_UUInitialize" >&5 +echo "$as_me:27237: result: $ac_cv_lib_uu_UUInitialize" >&5 echo "${ECHO_T}$ac_cv_lib_uu_UUInitialize" >&6 if test "$ac_cv_lib_uu_UUInitialize" = yes; then - echo "$as_me:26760: checking for uudeview.h" >&5 + echo "$as_me:27240: checking for uudeview.h" >&5 echo $ECHO_N "checking for uudeview.h... $ECHO_C" >&6 if test "${ac_cv_header_uudeview_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26766 "configure" +#line 27246 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:26770: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27250: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:26776: \$? = $ac_status" >&5 + echo "$as_me:27256: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -26792,7 +27272,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:26795: result: $ac_cv_header_uudeview_h" >&5 +echo "$as_me:27275: result: $ac_cv_header_uudeview_h" >&5 echo "${ECHO_T}$ac_cv_header_uudeview_h" >&6 if test "$ac_cv_header_uudeview_h" = yes; then @@ -26822,23 +27302,23 @@ fi # get $CFLAGS/$LDFLAGS from pkg-config icu-uc if possible cf_try_icuuc="no" cf_try_icuuc46="no" -echo "$as_me:26825: checking for unicode/unorm.h" >&5 +echo "$as_me:27305: checking for unicode/unorm.h" >&5 echo $ECHO_N "checking for unicode/unorm.h... $ECHO_C" >&6 if test "${ac_cv_header_unicode_unorm_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26831 "configure" +#line 27311 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:26835: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27315: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:26841: \$? = $ac_status" >&5 + echo "$as_me:27321: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -26857,27 +27337,27 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:26860: result: $ac_cv_header_unicode_unorm_h" >&5 +echo "$as_me:27340: result: $ac_cv_header_unicode_unorm_h" >&5 echo "${ECHO_T}$ac_cv_header_unicode_unorm_h" >&6 if test "$ac_cv_header_unicode_unorm_h" = yes; then - echo "$as_me:26864: checking for unicode/ustring.h" >&5 + echo "$as_me:27344: checking for unicode/ustring.h" >&5 echo $ECHO_N "checking for unicode/ustring.h... $ECHO_C" >&6 if test "${ac_cv_header_unicode_ustring_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26870 "configure" +#line 27350 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:26874: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27354: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:26880: \$? = $ac_status" >&5 + echo "$as_me:27360: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -26896,7 +27376,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:26899: result: $ac_cv_header_unicode_ustring_h" >&5 +echo "$as_me:27379: result: $ac_cv_header_unicode_ustring_h" >&5 echo "${ECHO_T}$ac_cv_header_unicode_ustring_h" >&6 if test "$ac_cv_header_unicode_ustring_h" = yes; then @@ -26908,13 +27388,13 @@ cat >>confdefs.h <<\EOF #define HAVE_UNICODE_USTRING_H 1 EOF - echo "$as_me:26911: checking for unorm_normalize in libicuuc" >&5 + echo "$as_me:27391: checking for unorm_normalize in libicuuc" >&5 echo $ECHO_N "checking for unorm_normalize in libicuuc... $ECHO_C" >&6 cf_save_LIBS="$LIBS" cf_try_icuuc="no" LIBS="$LIBS -licuuc" cat >"conftest.$ac_ext" <<_ACEOF -#line 26917 "configure" +#line 27397 "configure" #include "confdefs.h" $ac_includes_default #include @@ -26932,16 +27412,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:26935: \"$ac_link\"") >&5 +if { (eval echo "$as_me:27415: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:26938: \$? = $ac_status" >&5 + echo "$as_me:27418: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:26941: \"$ac_try\"") >&5 + { (eval echo "$as_me:27421: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:26944: \$? = $ac_status" >&5 + echo "$as_me:27424: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -26956,26 +27436,26 @@ LIBS=$cf_save_LIBS fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:26959: result: $cf_try_icuuc" >&5 + echo "$as_me:27439: result: $cf_try_icuuc" >&5 echo "${ECHO_T}$cf_try_icuuc" >&6 cf_save_LIBS="$LIBS" - echo "$as_me:26962: checking for unicode/uidna.h" >&5 + echo "$as_me:27442: checking for unicode/uidna.h" >&5 echo $ECHO_N "checking for unicode/uidna.h... $ECHO_C" >&6 if test "${ac_cv_header_unicode_uidna_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 26968 "configure" +#line 27448 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:26972: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27452: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:26978: \$? = $ac_status" >&5 + echo "$as_me:27458: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -26994,7 +27474,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:26997: result: $ac_cv_header_unicode_uidna_h" >&5 +echo "$as_me:27477: result: $ac_cv_header_unicode_uidna_h" >&5 echo "${ECHO_T}$ac_cv_header_unicode_uidna_h" >&6 if test "$ac_cv_header_unicode_uidna_h" = yes; then @@ -27004,10 +27484,10 @@ EOF fi - echo "$as_me:27007: checking for uidna_nameToUnicode in libicuuc" >&5 + echo "$as_me:27487: checking for uidna_nameToUnicode in libicuuc" >&5 echo $ECHO_N "checking for uidna_nameToUnicode in libicuuc... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 27010 "configure" +#line 27490 "configure" #include "confdefs.h" #include #include @@ -27025,16 +27505,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27028: \"$ac_link\"") >&5 +if { (eval echo "$as_me:27508: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27031: \$? = $ac_status" >&5 + echo "$as_me:27511: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27034: \"$ac_try\"") >&5 + { (eval echo "$as_me:27514: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27037: \$? = $ac_status" >&5 + echo "$as_me:27517: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -27049,25 +27529,25 @@ LIBS=$cf_save_LIBS fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:27052: result: $cf_try_icuuc46" >&5 + echo "$as_me:27532: result: $cf_try_icuuc46" >&5 echo "${ECHO_T}$cf_try_icuuc46" >&6 - echo "$as_me:27054: checking for unicode/ubidi.h" >&5 + echo "$as_me:27534: checking for unicode/ubidi.h" >&5 echo $ECHO_N "checking for unicode/ubidi.h... $ECHO_C" >&6 if test "${ac_cv_header_unicode_ubidi_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27060 "configure" +#line 27540 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27064: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27544: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27070: \$? = $ac_status" >&5 + echo "$as_me:27550: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27086,7 +27566,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27089: result: $ac_cv_header_unicode_ubidi_h" >&5 +echo "$as_me:27569: result: $ac_cv_header_unicode_ubidi_h" >&5 echo "${ECHO_T}$ac_cv_header_unicode_ubidi_h" >&6 if test "$ac_cv_header_unicode_ubidi_h" = yes; then @@ -27103,23 +27583,23 @@ fi for ac_header in unicode/unorm.h unicode/unorm2.h unicode/ustring.h unicode/ucnv.h unicode/ubidi.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:27106: checking for $ac_header" >&5 +echo "$as_me:27586: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27112 "configure" +#line 27592 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:27116: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27596: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27122: \$? = $ac_status" >&5 + echo "$as_me:27602: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27138,7 +27618,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27141: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:27621: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <>confdefs.h <<\EOF #define HAVE_UCNV_OPEN 1 @@ -27175,23 +27655,23 @@ if test $cf_try_icuuc = no ; then for ac_header in unistring/version.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:27178: checking for $ac_header" >&5 +echo "$as_me:27658: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27184 "configure" +#line 27664 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:27188: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27668: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27194: \$? = $ac_status" >&5 + echo "$as_me:27674: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27210,7 +27690,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27213: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:27693: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 + echo "$as_me:27703: checking for unitypes.h" >&5 echo $ECHO_N "checking for unitypes.h... $ECHO_C" >&6 if test "${ac_cv_header_unitypes_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27229 "configure" +#line 27709 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27233: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27713: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27239: \$? = $ac_status" >&5 + echo "$as_me:27719: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27255,27 +27735,27 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27258: result: $ac_cv_header_unitypes_h" >&5 +echo "$as_me:27738: result: $ac_cv_header_unitypes_h" >&5 echo "${ECHO_T}$ac_cv_header_unitypes_h" >&6 if test "$ac_cv_header_unitypes_h" = yes; then - echo "$as_me:27262: checking for uninorm.h" >&5 + echo "$as_me:27742: checking for uninorm.h" >&5 echo $ECHO_N "checking for uninorm.h... $ECHO_C" >&6 if test "${ac_cv_header_uninorm_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27268 "configure" +#line 27748 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27272: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27752: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27278: \$? = $ac_status" >&5 + echo "$as_me:27758: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27294,7 +27774,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27297: result: $ac_cv_header_uninorm_h" >&5 +echo "$as_me:27777: result: $ac_cv_header_uninorm_h" >&5 echo "${ECHO_T}$ac_cv_header_uninorm_h" >&6 if test "$ac_cv_header_uninorm_h" = yes; then @@ -27306,13 +27786,13 @@ cat >>confdefs.h <<\EOF #define HAVE_UNINORM_H 1 EOF - echo "$as_me:27309: checking for u8_normalize in libunistring" >&5 + echo "$as_me:27789: checking for u8_normalize in libunistring" >&5 echo $ECHO_N "checking for u8_normalize in libunistring... $ECHO_C" >&6 cf_save_LIBS="$LIBS" cf_try_unistring="no" LIBS="$LIBS -lunistring" cat >"conftest.$ac_ext" <<_ACEOF -#line 27315 "configure" +#line 27795 "configure" #include "confdefs.h" #include #include @@ -27327,16 +27807,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27330: \"$ac_link\"") >&5 +if { (eval echo "$as_me:27810: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27333: \$? = $ac_status" >&5 + echo "$as_me:27813: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27336: \"$ac_try\"") >&5 + { (eval echo "$as_me:27816: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27339: \$? = $ac_status" >&5 + echo "$as_me:27819: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -27351,7 +27831,7 @@ LIBS=$cf_save_LIBS fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:27354: result: $cf_try_unistring" >&5 + echo "$as_me:27834: result: $cf_try_unistring" >&5 echo "${ECHO_T}$cf_try_unistring" >&6 fi @@ -27363,7 +27843,7 @@ fi # without icuuc try libidn for Internationalized Domain Names / IDN 2003 # TODO: get $CFLAGS/$LDFLAGS from pkg-config libidn if possible if test $cf_try_icuuc = no ; then - echo "$as_me:27366: checking for stringprep_check_version in -lidn" >&5 + echo "$as_me:27846: checking for stringprep_check_version in -lidn" >&5 echo $ECHO_N "checking for stringprep_check_version in -lidn... $ECHO_C" >&6 if test "${ac_cv_lib_idn_stringprep_check_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -27371,7 +27851,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lidn $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 27374 "configure" +#line 27854 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -27390,16 +27870,16 @@ stringprep_check_version (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27393: \"$ac_link\"") >&5 +if { (eval echo "$as_me:27873: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27396: \$? = $ac_status" >&5 + echo "$as_me:27876: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27399: \"$ac_try\"") >&5 + { (eval echo "$as_me:27879: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27402: \$? = $ac_status" >&5 + echo "$as_me:27882: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_idn_stringprep_check_version=yes else @@ -27410,26 +27890,26 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:27413: result: $ac_cv_lib_idn_stringprep_check_version" >&5 +echo "$as_me:27893: result: $ac_cv_lib_idn_stringprep_check_version" >&5 echo "${ECHO_T}$ac_cv_lib_idn_stringprep_check_version" >&6 if test "$ac_cv_lib_idn_stringprep_check_version" = yes; then - echo "$as_me:27416: checking for stringprep.h" >&5 + echo "$as_me:27896: checking for stringprep.h" >&5 echo $ECHO_N "checking for stringprep.h... $ECHO_C" >&6 if test "${ac_cv_header_stringprep_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27422 "configure" +#line 27902 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27426: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27906: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27432: \$? = $ac_status" >&5 + echo "$as_me:27912: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27448,7 +27928,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27451: result: $ac_cv_header_stringprep_h" >&5 +echo "$as_me:27931: result: $ac_cv_header_stringprep_h" >&5 echo "${ECHO_T}$ac_cv_header_stringprep_h" >&6 if test "$ac_cv_header_stringprep_h" = yes; then @@ -27456,23 +27936,23 @@ cat >>confdefs.h <<\EOF #define HAVE_STRINGPREP_H 1 EOF - echo "$as_me:27459: checking for idna.h" >&5 + echo "$as_me:27939: checking for idna.h" >&5 echo $ECHO_N "checking for idna.h... $ECHO_C" >&6 if test "${ac_cv_header_idna_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27465 "configure" +#line 27945 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27469: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:27949: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27475: \$? = $ac_status" >&5 + echo "$as_me:27955: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27491,7 +27971,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27494: result: $ac_cv_header_idna_h" >&5 +echo "$as_me:27974: result: $ac_cv_header_idna_h" >&5 echo "${ECHO_T}$ac_cv_header_idna_h" >&6 if test "$ac_cv_header_idna_h" = yes; then @@ -27499,7 +27979,7 @@ cat >>confdefs.h <<\EOF #define HAVE_IDNA_H 1 EOF - echo "$as_me:27502: checking for idna_to_unicode_lzlz in -lidn" >&5 + echo "$as_me:27982: checking for idna_to_unicode_lzlz in -lidn" >&5 echo $ECHO_N "checking for idna_to_unicode_lzlz in -lidn... $ECHO_C" >&6 if test "${ac_cv_lib_idn_idna_to_unicode_lzlz+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -27507,7 +27987,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lidn $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 27510 "configure" +#line 27990 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -27526,16 +28006,16 @@ idna_to_unicode_lzlz (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27529: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28009: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27532: \$? = $ac_status" >&5 + echo "$as_me:28012: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27535: \"$ac_try\"") >&5 + { (eval echo "$as_me:28015: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27538: \$? = $ac_status" >&5 + echo "$as_me:28018: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_idn_idna_to_unicode_lzlz=yes else @@ -27546,7 +28026,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:27549: result: $ac_cv_lib_idn_idna_to_unicode_lzlz" >&5 +echo "$as_me:28029: result: $ac_cv_lib_idn_idna_to_unicode_lzlz" >&5 echo "${ECHO_T}$ac_cv_lib_idn_idna_to_unicode_lzlz" >&6 if test "$ac_cv_lib_idn_idna_to_unicode_lzlz" = yes; then @@ -27554,10 +28034,10 @@ cat >>confdefs.h <<\EOF #define HAVE_IDNA_TO_UNICODE_LZLZ 1 EOF - echo "$as_me:27557: checking for IDNA_USE_STD3_ASCII_RULES" >&5 + echo "$as_me:28037: checking for IDNA_USE_STD3_ASCII_RULES" >&5 echo $ECHO_N "checking for IDNA_USE_STD3_ASCII_RULES... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 27560 "configure" +#line 28040 "configure" #include "confdefs.h" #include @@ -27569,10 +28049,10 @@ cat >>confdefs.h <<\EOF #define HAVE_IDNA_USE_STD3_ASCII_RULES 1 EOF - echo "$as_me:27572: result: yes" >&5 + echo "$as_me:28052: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:27575: result: no" >&5 + echo "$as_me:28055: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -27580,7 +28060,7 @@ rm -rf conftest* fi - echo "$as_me:27583: checking for idna_strerror in -lidn" >&5 + echo "$as_me:28063: checking for idna_strerror in -lidn" >&5 echo $ECHO_N "checking for idna_strerror in -lidn... $ECHO_C" >&6 if test "${ac_cv_lib_idn_idna_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -27588,7 +28068,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lidn $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 27591 "configure" +#line 28071 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -27607,16 +28087,16 @@ idna_strerror (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27610: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28090: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27613: \$? = $ac_status" >&5 + echo "$as_me:28093: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27616: \"$ac_try\"") >&5 + { (eval echo "$as_me:28096: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27619: \$? = $ac_status" >&5 + echo "$as_me:28099: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_idn_idna_strerror=yes else @@ -27627,7 +28107,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:27630: result: $ac_cv_lib_idn_idna_strerror" >&5 +echo "$as_me:28110: result: $ac_cv_lib_idn_idna_strerror" >&5 echo "${ECHO_T}$ac_cv_lib_idn_idna_strerror" >&6 if test "$ac_cv_lib_idn_idna_strerror" = yes; then @@ -27652,23 +28132,37 @@ fi fi # GNU linidn2 // CF_TRY_PKG_CONFIG has no version checking yet -echo "$as_me:27655: checking for libidn2" >&5 +echo "$as_me:28135: checking for libidn2" >&5 echo $ECHO_N "checking for libidn2... $ECHO_C" >&6 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "libidn2"; then test -n "$verbose" && echo " found package libidn2" 1>&6 -echo "${as_me:-configure}:27661: testing found package libidn2 ..." 1>&5 +echo "${as_me:-configure}:28141: testing found package libidn2 ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "libidn2" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "libidn2" 2>/dev/null`" test -n "$verbose" && echo " package libidn2 CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:27667: testing package libidn2 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:28147: testing package libidn2 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package libidn2 LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:27671: testing package libidn2 LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:28151: testing package libidn2 LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in libidn2 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -27793,11 +28287,16 @@ EOF EOF have_libidn2=yes +if test x"$verbose" != "xyes" ; then +echo "$as_me:28291: result: $have_libidn2" >&5 +echo "${ECHO_T}$have_libidn2" >&6 +fi + else cf_pkgconfig_incs= cf_pkgconfig_libs= cat >"conftest.$ac_ext" <<_ACEOF -#line 27800 "configure" +#line 28299 "configure" #include "confdefs.h" #include @@ -27815,37 +28314,39 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:27818: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:28317: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:27821: \$? = $ac_status" >&5 + echo "$as_me:28320: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:27824: \"$ac_try\"") >&5 + { (eval echo "$as_me:28323: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27827: \$? = $ac_status" >&5 + echo "$as_me:28326: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then have_libidn2=yes cat >>confdefs.h <<\EOF #define HAVE_IDN2_H 1 EOF +echo "$as_me:28333: result: $have_libidn2" >&5 +echo "${ECHO_T}$have_libidn2" >&6 + else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 have_libidn2=no - echo "$as_me:27838: result: $have_libidn2" >&5 + echo "$as_me:28340: result: $have_libidn2" >&5 echo "${ECHO_T}$have_libidn2" >&6 fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - fi # libidnkit - Internationalized Domain Names / IDN 2008 if test "x$have_libidn2" != "xyes"; then -echo "$as_me:27848: checking for idn_decodename in -lidnkit" >&5 +echo "$as_me:28349: checking for idn_decodename in -lidnkit" >&5 echo $ECHO_N "checking for idn_decodename in -lidnkit... $ECHO_C" >&6 if test "${ac_cv_lib_idnkit_idn_decodename+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -27853,7 +28354,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lidnkit $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 27856 "configure" +#line 28357 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -27872,16 +28373,16 @@ idn_decodename (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:27875: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28376: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:27878: \$? = $ac_status" >&5 + echo "$as_me:28379: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:27881: \"$ac_try\"") >&5 + { (eval echo "$as_me:28382: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:27884: \$? = $ac_status" >&5 + echo "$as_me:28385: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_idnkit_idn_decodename=yes else @@ -27892,30 +28393,30 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:27895: result: $ac_cv_lib_idnkit_idn_decodename" >&5 +echo "$as_me:28396: result: $ac_cv_lib_idnkit_idn_decodename" >&5 echo "${ECHO_T}$ac_cv_lib_idnkit_idn_decodename" >&6 if test "$ac_cv_lib_idnkit_idn_decodename" = yes; then for ac_header in idn/version.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:27902: checking for $ac_header" >&5 +echo "$as_me:28403: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27908 "configure" +#line 28409 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:27912: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:28413: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27918: \$? = $ac_status" >&5 + echo "$as_me:28419: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27934,7 +28435,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27937: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:28438: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 + echo "$as_me:28448: checking for idn/api.h" >&5 echo $ECHO_N "checking for idn/api.h... $ECHO_C" >&6 if test "${ac_cv_header_idn_api_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 27953 "configure" +#line 28454 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:27957: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:28458: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:27963: \$? = $ac_status" >&5 + echo "$as_me:28464: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -27979,16 +28480,16 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:27982: result: $ac_cv_header_idn_api_h" >&5 +echo "$as_me:28483: result: $ac_cv_header_idn_api_h" >&5 echo "${ECHO_T}$ac_cv_header_idn_api_h" >&6 if test "$ac_cv_header_idn_api_h" = yes; then - echo "$as_me:27986: checking for IDN_DECODE_LOOKUP" >&5 + echo "$as_me:28487: checking for IDN_DECODE_LOOKUP" >&5 echo $ECHO_N "checking for IDN_DECODE_LOOKUP... $ECHO_C" >&6 cf_save_LIBS="$LIBS" LIBS="$LIBS -lidnkit" cat >"conftest.$ac_ext" <<_ACEOF -#line 27991 "configure" +#line 28492 "configure" #include "confdefs.h" #include #include @@ -28008,16 +28509,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28011: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28512: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28014: \$? = $ac_status" >&5 + echo "$as_me:28515: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28017: \"$ac_try\"") >&5 + { (eval echo "$as_me:28518: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28020: \$? = $ac_status" >&5 + echo "$as_me:28521: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -28032,7 +28533,7 @@ cat >>confdefs.h <<\EOF #define HAVE_IDN_DECODENAME 1 EOF - echo "$as_me:28035: result: yes" >&5 + echo "$as_me:28536: result: yes" >&5 echo "${ECHO_T}yes" >&6 cf_have_libidnkit="yes" else @@ -28040,7 +28541,7 @@ else cat "conftest.$ac_ext" >&5 LIBS=$cf_save_LIBS - echo "$as_me:28043: result: no" >&5 + echo "$as_me:28544: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -28058,23 +28559,23 @@ fi for ac_header in unicode/ucsdet.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:28061: checking for $ac_header" >&5 +echo "$as_me:28562: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 28067 "configure" +#line 28568 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:28071: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:28572: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:28077: \$? = $ac_status" >&5 + echo "$as_me:28578: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -28093,20 +28594,20 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:28096: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:28597: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 + echo "$as_me:28604: checking for ucsdet_detect in libicui18n" >&5 echo $ECHO_N "checking for ucsdet_detect in libicui18n... $ECHO_C" >&6 cf_save_LIBS="$LIBS" cf_try_icui18n="no" LIBS="$LIBS -licui18n" cat >"conftest.$ac_ext" <<_ACEOF -#line 28109 "configure" +#line 28610 "configure" #include "confdefs.h" $ac_includes_default @@ -28128,16 +28629,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28131: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28632: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28134: \$? = $ac_status" >&5 + echo "$as_me:28635: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28137: \"$ac_try\"") >&5 + { (eval echo "$as_me:28638: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28140: \$? = $ac_status" >&5 + echo "$as_me:28641: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -28151,7 +28652,7 @@ cat "conftest.$ac_ext" >&5 LIBS=$cf_save_LIBS fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:28154: result: $cf_try_icui18n" >&5 + echo "$as_me:28655: result: $cf_try_icui18n" >&5 echo "${ECHO_T}$cf_try_icui18n" >&6 cf_save_LIBS="$LIBS" @@ -28168,7 +28669,7 @@ else cf_cv_termlib=none cat >"conftest.$ac_ext" <<_ACEOF -#line 28171 "configure" +#line 28672 "configure" #include "confdefs.h" extern char *tgoto(const char*,int,int); int @@ -28180,19 +28681,19 @@ char *x=tgoto("",0,0); (void)x; } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28183: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28684: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28186: \$? = $ac_status" >&5 + echo "$as_me:28687: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28189: \"$ac_try\"") >&5 + { (eval echo "$as_me:28690: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28192: \$? = $ac_status" >&5 + echo "$as_me:28693: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >"conftest.$ac_ext" <<_ACEOF -#line 28195 "configure" +#line 28696 "configure" #include "confdefs.h" extern char *tigetstr(const char *); int @@ -28204,16 +28705,16 @@ char *x=tigetstr(""); (void)x; } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28207: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28708: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28210: \$? = $ac_status" >&5 + echo "$as_me:28711: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28213: \"$ac_try\"") >&5 + { (eval echo "$as_me:28714: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28216: \$? = $ac_status" >&5 + echo "$as_me:28717: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_termlib=terminfo else @@ -28224,7 +28725,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" test -n "$verbose" && echo " using functions in predefined $cf_cv_termlib LIBS" 1>&6 -echo "${as_me:-configure}:28227: testing using functions in predefined $cf_cv_termlib LIBS ..." 1>&5 +echo "${as_me:-configure}:28728: testing using functions in predefined $cf_cv_termlib LIBS ..." 1>&5 else echo "$as_me: failed program was:" >&5 @@ -28239,10 +28740,10 @@ if test "$cf_cv_termlib" = none; then LIBS="-l$cf_lib $cf_save_LIBS" for cf_func in tigetstr tgetstr do - echo "$as_me:28242: checking for $cf_func in -l$cf_lib" >&5 + echo "$as_me:28743: checking for $cf_func in -l$cf_lib" >&5 echo $ECHO_N "checking for $cf_func in -l$cf_lib... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 28245 "configure" +#line 28746 "configure" #include "confdefs.h" extern char *$cf_func(const char *); int @@ -28254,16 +28755,16 @@ char *x = $cf_func(""); (void)x } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28257: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28758: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28260: \$? = $ac_status" >&5 + echo "$as_me:28761: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28263: \"$ac_try\"") >&5 + { (eval echo "$as_me:28764: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28266: \$? = $ac_status" >&5 + echo "$as_me:28767: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -28272,7 +28773,7 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:28275: result: $cf_result" >&5 + echo "$as_me:28776: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 if test "$cf_result" = yes ; then if test "$cf_func" = tigetstr ; then @@ -28289,7 +28790,7 @@ echo "${ECHO_T}$cf_result" >&6 fi if test "$cf_cv_termlib" = none; then # allow curses library for broken AIX system. - echo "$as_me:28292: checking for initscr in -lcurses" >&5 + echo "$as_me:28793: checking for initscr in -lcurses" >&5 echo $ECHO_N "checking for initscr in -lcurses... $ECHO_C" >&6 if test "${ac_cv_lib_curses_initscr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -28297,7 +28798,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lcurses $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 28300 "configure" +#line 28801 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -28316,16 +28817,16 @@ initscr (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28319: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28820: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28322: \$? = $ac_status" >&5 + echo "$as_me:28823: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28325: \"$ac_try\"") >&5 + { (eval echo "$as_me:28826: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28328: \$? = $ac_status" >&5 + echo "$as_me:28829: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_curses_initscr=yes else @@ -28336,7 +28837,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:28339: result: $ac_cv_lib_curses_initscr" >&5 +echo "$as_me:28840: result: $ac_cv_lib_curses_initscr" >&5 echo "${ECHO_T}$ac_cv_lib_curses_initscr" >&6 if test "$ac_cv_lib_curses_initscr" = yes; then @@ -28358,7 +28859,7 @@ LIBS="$cf_add_libs" fi - echo "$as_me:28361: checking for tgoto in -ltermcap" >&5 + echo "$as_me:28862: checking for tgoto in -ltermcap" >&5 echo $ECHO_N "checking for tgoto in -ltermcap... $ECHO_C" >&6 if test "${ac_cv_lib_termcap_tgoto+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -28366,7 +28867,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-ltermcap $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 28369 "configure" +#line 28870 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -28385,16 +28886,16 @@ tgoto (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28388: \"$ac_link\"") >&5 +if { (eval echo "$as_me:28889: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28391: \$? = $ac_status" >&5 + echo "$as_me:28892: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28394: \"$ac_try\"") >&5 + { (eval echo "$as_me:28895: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28397: \$? = $ac_status" >&5 + echo "$as_me:28898: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_termcap_tgoto=yes else @@ -28405,7 +28906,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:28408: result: $ac_cv_lib_termcap_tgoto" >&5 +echo "$as_me:28909: result: $ac_cv_lib_termcap_tgoto" >&5 echo "${ECHO_T}$ac_cv_lib_termcap_tgoto" >&6 if test "$ac_cv_lib_termcap_tgoto" = yes; then @@ -28432,7 +28933,7 @@ fi fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" if test "$cf_cv_termlib" = none; then - { echo "$as_me:28435: WARNING: Cannot find -ltermlib, -lcurses, or -ltermcap" >&5 + { echo "$as_me:28936: WARNING: Cannot find -ltermlib, -lcurses, or -ltermcap" >&5 echo "$as_me: WARNING: Cannot find -ltermlib, -lcurses, or -ltermcap" >&2;} fi @@ -28440,12 +28941,12 @@ fi # terminfo-based termcap interfaces may be prototyped in , # which may/may not be compatible with - echo "$as_me:28443: checking if we should include termcap.h" >&5 + echo "$as_me:28944: checking if we should include termcap.h" >&5 echo $ECHO_N "checking if we should include termcap.h... $ECHO_C" >&6 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -I$srcdir/include" cat >"conftest.$ac_ext" <<_ACEOF -#line 28448 "configure" +#line 28949 "configure" #include "confdefs.h" #define HAVE_TERMCAP_H 1 @@ -28463,16 +28964,16 @@ make an error } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:28466: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:28967: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:28469: \$? = $ac_status" >&5 + echo "$as_me:28970: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:28472: \"$ac_try\"") >&5 + { (eval echo "$as_me:28973: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28475: \$? = $ac_status" >&5 + echo "$as_me:28976: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -28481,7 +28982,7 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:28484: result: $cf_result" >&5 + echo "$as_me:28985: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 CFLAGS="$cf_save_CFLAGS" test $cf_result = yes && @@ -28489,7 +28990,7 @@ cat >>confdefs.h <<\EOF #define HAVE_TERMCAP_H 1 EOF -echo "$as_me:28492: checking for term.h" >&5 +echo "$as_me:28993: checking for term.h" >&5 echo $ECHO_N "checking for term.h... $ECHO_C" >&6 if test "${cf_cv_term_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -28510,7 +29011,7 @@ esac for cf_header in $cf_header_list do cat >"conftest.$ac_ext" <<_ACEOF -#line 28513 "configure" +#line 29014 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> @@ -28524,16 +29025,16 @@ WINDOW *x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:28527: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29028: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:28530: \$? = $ac_status" >&5 + echo "$as_me:29031: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:28533: \"$ac_try\"") >&5 + { (eval echo "$as_me:29034: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28536: \$? = $ac_status" >&5 + echo "$as_me:29037: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header=$cf_header break @@ -28552,7 +29053,7 @@ no) for cf_header in ncurses/term.h ncursesw/term.h do cat >"conftest.$ac_ext" <<_ACEOF -#line 28555 "configure" +#line 29056 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> @@ -28570,16 +29071,16 @@ WINDOW *x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:28573: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29074: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:28576: \$? = $ac_status" >&5 + echo "$as_me:29077: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:28579: \"$ac_try\"") >&5 + { (eval echo "$as_me:29080: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28582: \$? = $ac_status" >&5 + echo "$as_me:29083: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_term_header=$cf_header break @@ -28594,7 +29095,7 @@ rm -f "conftest.$ac_objext" "conftest.$a esac fi -echo "$as_me:28597: result: $cf_cv_term_header" >&5 +echo "$as_me:29098: result: $cf_cv_term_header" >&5 echo "${ECHO_T}$cf_cv_term_header" >&6 case "$cf_cv_term_header" in @@ -28621,7 +29122,7 @@ EOF ;; esac -echo "$as_me:28624: checking if we should include curses.h or termcap.h" >&5 +echo "$as_me:29125: checking if we should include curses.h or termcap.h" >&5 echo $ECHO_N "checking if we should include curses.h or termcap.h... $ECHO_C" >&6 if test "${cf_cv_need_curses_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -28643,7 +29144,7 @@ do test -n "${cf_c_opts}${cf_t_opts}" && cf_tgoto_decl= cat >"conftest.$ac_ext" <<_ACEOF -#line 28646 "configure" +#line 29147 "configure" #include "confdefs.h" /* $cf_c_opts $cf_t_opts */ $CHECK_DECL_HDRS $cf_tgoto_decl @@ -28656,16 +29157,16 @@ static char fmt[] = ""; char *x = tgoto( } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28659: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29160: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28662: \$? = $ac_status" >&5 + echo "$as_me:29163: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28665: \"$ac_try\"") >&5 + { (eval echo "$as_me:29166: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28668: \$? = $ac_status" >&5 + echo "$as_me:29169: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test "$cf_cv_need_curses_h" = no && { cf_cv_need_curses_h=maybe @@ -28677,7 +29178,7 @@ else cat "conftest.$ac_ext" >&5 echo "Recompiling with corrected call (C:$cf_c_opts, T:$cf_t_opts)" >&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 28680 "configure" +#line 29181 "configure" #include "confdefs.h" $CHECK_DECL_HDRS $cf_tgoto_decl @@ -28690,16 +29191,16 @@ static char fmt[] = ""; char *x = tgoto( } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28693: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29194: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28696: \$? = $ac_status" >&5 + echo "$as_me:29197: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28699: \"$ac_try\"") >&5 + { (eval echo "$as_me:29200: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28702: \$? = $ac_status" >&5 + echo "$as_me:29203: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_need_curses_h=yes cf_ok_c_opts=$cf_c_opts @@ -28736,7 +29237,7 @@ if test "$cf_cv_need_curses_h" != no ; t fi fi -echo "$as_me:28739: result: $cf_cv_need_curses_h" >&5 +echo "$as_me:29240: result: $cf_cv_need_curses_h" >&5 echo "${ECHO_T}$cf_cv_need_curses_h" >&6 case $cf_cv_need_curses_h in @@ -28774,7 +29275,7 @@ EOF ;; esac -echo "$as_me:28777: checking declaration of tputs 3rd param" >&5 +echo "$as_me:29278: checking declaration of tputs 3rd param" >&5 echo $ECHO_N "checking declaration of tputs 3rd param... $ECHO_C" >&6 if test "${cf_cv_type_outchar+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -28790,10 +29291,10 @@ for Q in int void; do for R in int char; do for S in "" const; do -echo "${as_me:-configure}:28793: testing loop variables P:$P, Q:$Q, R:$R, S:$S ..." 1>&5 +echo "${as_me:-configure}:29294: testing loop variables P:$P, Q:$Q, R:$R, S:$S ..." 1>&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 28796 "configure" +#line 29297 "configure" #include "confdefs.h" $CHECK_DECL_HDRS extern $Q OutChar($R); @@ -28808,16 +29309,16 @@ tputs(fmt, 1, OutChar) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:28811: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29312: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:28814: \$? = $ac_status" >&5 + echo "$as_me:29315: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:28817: \"$ac_try\"") >&5 + { (eval echo "$as_me:29318: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28820: \$? = $ac_status" >&5 + echo "$as_me:29321: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_outchar="$Q OutChar($R)" cf_cv_found=yes @@ -28836,7 +29337,7 @@ done done fi -echo "$as_me:28839: result: $cf_cv_type_outchar" >&5 +echo "$as_me:29340: result: $cf_cv_type_outchar" >&5 echo "${ECHO_T}$cf_cv_type_outchar" >&6 case $cf_cv_type_outchar in @@ -28875,7 +29376,7 @@ EOF elif test ".$cf_cv_termlib" = .termcap ; then # BSD 'tputs()' may need 'PC' to be set. cat >"conftest.$ac_ext" <<_ACEOF -#line 28878 "configure" +#line 29379 "configure" #include "confdefs.h" int @@ -28887,16 +29388,16 @@ extern char PC; PC = 0 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28890: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29391: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28893: \$? = $ac_status" >&5 + echo "$as_me:29394: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:28896: \"$ac_try\"") >&5 + { (eval echo "$as_me:29397: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28899: \$? = $ac_status" >&5 + echo "$as_me:29400: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF @@ -28914,14 +29415,14 @@ fi ### Checks for external-data -echo "$as_me:28917: checking if external errno is declared" >&5 +echo "$as_me:29418: checking if external errno is declared" >&5 echo $ECHO_N "checking if external errno is declared... $ECHO_C" >&6 if test "${cf_cv_dcl_errno+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 28924 "configure" +#line 29425 "configure" #include "confdefs.h" $ac_includes_default @@ -28935,16 +29436,16 @@ int x = (int) errno; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:28938: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29439: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:28941: \$? = $ac_status" >&5 + echo "$as_me:29442: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:28944: \"$ac_try\"") >&5 + { (eval echo "$as_me:29445: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:28947: \$? = $ac_status" >&5 + echo "$as_me:29448: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_dcl_errno=yes else @@ -28955,7 +29456,7 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:28958: result: $cf_cv_dcl_errno" >&5 +echo "$as_me:29459: result: $cf_cv_dcl_errno" >&5 echo "${ECHO_T}$cf_cv_dcl_errno" >&6 if test "$cf_cv_dcl_errno" = no ; then @@ -28970,14 +29471,14 @@ fi # It's possible (for near-UNIX clones) that the data doesn't exist -echo "$as_me:28973: checking if external errno exists" >&5 +echo "$as_me:29474: checking if external errno exists" >&5 echo $ECHO_N "checking if external errno exists... $ECHO_C" >&6 if test "${cf_cv_have_errno+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 28980 "configure" +#line 29481 "configure" #include "confdefs.h" #undef errno @@ -28992,16 +29493,16 @@ errno = 2 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:28995: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29496: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:28998: \$? = $ac_status" >&5 + echo "$as_me:29499: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29001: \"$ac_try\"") >&5 + { (eval echo "$as_me:29502: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29004: \$? = $ac_status" >&5 + echo "$as_me:29505: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have_errno=yes else @@ -29012,7 +29513,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29015: result: $cf_cv_have_errno" >&5 +echo "$as_me:29516: result: $cf_cv_have_errno" >&5 echo "${ECHO_T}$cf_cv_have_errno" >&6 if test "$cf_cv_have_errno" = yes ; then @@ -29028,13 +29529,13 @@ fi for ac_func in strerror do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:29031: checking for $ac_func" >&5 +echo "$as_me:29532: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29037 "configure" +#line 29538 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -29065,16 +29566,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29068: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29569: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29071: \$? = $ac_status" >&5 + echo "$as_me:29572: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29074: \"$ac_try\"") >&5 + { (eval echo "$as_me:29575: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29077: \$? = $ac_status" >&5 + echo "$as_me:29578: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -29084,7 +29585,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29087: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:29588: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:29600: checking if external sys_nerr is declared" >&5 echo $ECHO_N "checking if external sys_nerr is declared... $ECHO_C" >&6 if test "${cf_cv_dcl_sys_nerr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29106 "configure" +#line 29607 "configure" #include "confdefs.h" $ac_includes_default @@ -29117,16 +29618,16 @@ int x = (int) sys_nerr; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:29120: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29621: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:29123: \$? = $ac_status" >&5 + echo "$as_me:29624: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:29126: \"$ac_try\"") >&5 + { (eval echo "$as_me:29627: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29129: \$? = $ac_status" >&5 + echo "$as_me:29630: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_dcl_sys_nerr=yes else @@ -29137,7 +29638,7 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:29140: result: $cf_cv_dcl_sys_nerr" >&5 +echo "$as_me:29641: result: $cf_cv_dcl_sys_nerr" >&5 echo "${ECHO_T}$cf_cv_dcl_sys_nerr" >&6 if test "$cf_cv_dcl_sys_nerr" = no ; then @@ -29152,14 +29653,14 @@ fi # It's possible (for near-UNIX clones) that the data doesn't exist -echo "$as_me:29155: checking if external sys_nerr exists" >&5 +echo "$as_me:29656: checking if external sys_nerr exists" >&5 echo $ECHO_N "checking if external sys_nerr exists... $ECHO_C" >&6 if test "${cf_cv_have_sys_nerr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29162 "configure" +#line 29663 "configure" #include "confdefs.h" #undef sys_nerr @@ -29174,16 +29675,16 @@ sys_nerr = 2 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29177: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29678: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29180: \$? = $ac_status" >&5 + echo "$as_me:29681: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29183: \"$ac_try\"") >&5 + { (eval echo "$as_me:29684: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29186: \$? = $ac_status" >&5 + echo "$as_me:29687: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have_sys_nerr=yes else @@ -29194,7 +29695,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29197: result: $cf_cv_have_sys_nerr" >&5 +echo "$as_me:29698: result: $cf_cv_have_sys_nerr" >&5 echo "${ECHO_T}$cf_cv_have_sys_nerr" >&6 if test "$cf_cv_have_sys_nerr" = yes ; then @@ -29207,14 +29708,14 @@ EOF fi -echo "$as_me:29210: checking if external sys_errlist is declared" >&5 +echo "$as_me:29711: checking if external sys_errlist is declared" >&5 echo $ECHO_N "checking if external sys_errlist is declared... $ECHO_C" >&6 if test "${cf_cv_dcl_sys_errlist+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29217 "configure" +#line 29718 "configure" #include "confdefs.h" $ac_includes_default @@ -29228,16 +29729,16 @@ int x = (int) sys_errlist; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:29231: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:29732: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:29234: \$? = $ac_status" >&5 + echo "$as_me:29735: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:29237: \"$ac_try\"") >&5 + { (eval echo "$as_me:29738: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29240: \$? = $ac_status" >&5 + echo "$as_me:29741: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_dcl_sys_errlist=yes else @@ -29248,7 +29749,7 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:29251: result: $cf_cv_dcl_sys_errlist" >&5 +echo "$as_me:29752: result: $cf_cv_dcl_sys_errlist" >&5 echo "${ECHO_T}$cf_cv_dcl_sys_errlist" >&6 if test "$cf_cv_dcl_sys_errlist" = no ; then @@ -29263,14 +29764,14 @@ fi # It's possible (for near-UNIX clones) that the data doesn't exist -echo "$as_me:29266: checking if external sys_errlist exists" >&5 +echo "$as_me:29767: checking if external sys_errlist exists" >&5 echo $ECHO_N "checking if external sys_errlist exists... $ECHO_C" >&6 if test "${cf_cv_have_sys_errlist+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29273 "configure" +#line 29774 "configure" #include "confdefs.h" #undef sys_errlist @@ -29285,16 +29786,16 @@ sys_errlist = 2 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29288: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29789: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29291: \$? = $ac_status" >&5 + echo "$as_me:29792: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29294: \"$ac_try\"") >&5 + { (eval echo "$as_me:29795: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29297: \$? = $ac_status" >&5 + echo "$as_me:29798: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_have_sys_errlist=yes else @@ -29305,7 +29806,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29308: result: $cf_cv_have_sys_errlist" >&5 +echo "$as_me:29809: result: $cf_cv_have_sys_errlist" >&5 echo "${ECHO_T}$cf_cv_have_sys_errlist" >&6 if test "$cf_cv_have_sys_errlist" = yes ; then @@ -29326,7 +29827,6 @@ done for ac_func in \ alarm \ arc4random_uniform \ - atoi \ atol \ atoll \ atoq \ @@ -29350,6 +29850,7 @@ for ac_func in \ isascii \ lockf \ lrand48 \ + lstat \ memcmp \ memcpy \ memmove \ @@ -29357,13 +29858,16 @@ for ac_func in \ mkdir \ mkfifo \ mktemp \ + mktime \ mkstemp \ nl_langinfo \ poll \ + posix_close \ putenv \ random \ - rewinddir \ + realpath \ resizeterm \ + rewinddir \ select \ setenv \ setlocale \ @@ -29376,6 +29880,7 @@ for ac_func in \ strcasestr \ strdup \ strftime \ + strptime \ strpbrk \ strrchr \ strrstr \ @@ -29393,13 +29898,13 @@ for ac_func in \ $cf_tc_funcs do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:29396: checking for $ac_func" >&5 +echo "$as_me:29901: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29402 "configure" +#line 29907 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -29430,16 +29935,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29433: \"$ac_link\"") >&5 +if { (eval echo "$as_me:29938: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29436: \$? = $ac_status" >&5 + echo "$as_me:29941: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29439: \"$ac_try\"") >&5 + { (eval echo "$as_me:29944: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29442: \$? = $ac_status" >&5 + echo "$as_me:29947: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -29449,7 +29954,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29452: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:29957: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:29967: checking for flock" >&5 echo $ECHO_N "checking for flock... $ECHO_C" >&6 if test "${ac_cv_func_flock+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29468 "configure" +#line 29973 "configure" #include "confdefs.h" #define flock autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -29496,16 +30001,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29499: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30004: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29502: \$? = $ac_status" >&5 + echo "$as_me:30007: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29505: \"$ac_try\"") >&5 + { (eval echo "$as_me:30010: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29508: \$? = $ac_status" >&5 + echo "$as_me:30013: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_flock=yes else @@ -29515,7 +30020,7 @@ ac_cv_func_flock=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29518: result: $ac_cv_func_flock" >&5 +echo "$as_me:30023: result: $ac_cv_func_flock" >&5 echo "${ECHO_T}$ac_cv_func_flock" >&6 if test "$ac_cv_func_flock" = yes; then @@ -29525,7 +30030,7 @@ EOF else - echo "$as_me:29528: checking for flock in -lbsd" >&5 + echo "$as_me:30033: checking for flock in -lbsd" >&5 echo $ECHO_N "checking for flock in -lbsd... $ECHO_C" >&6 if test "${ac_cv_lib_bsd_flock+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -29533,7 +30038,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lbsd $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 29536 "configure" +#line 30041 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -29552,16 +30057,16 @@ flock (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29555: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30060: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29558: \$? = $ac_status" >&5 + echo "$as_me:30063: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29561: \"$ac_try\"") >&5 + { (eval echo "$as_me:30066: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29564: \$? = $ac_status" >&5 + echo "$as_me:30069: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_bsd_flock=yes else @@ -29572,7 +30077,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:29575: result: $ac_cv_lib_bsd_flock" >&5 +echo "$as_me:30080: result: $ac_cv_lib_bsd_flock" >&5 echo "${ECHO_T}$ac_cv_lib_bsd_flock" >&6 if test "$ac_cv_lib_bsd_flock" = yes; then cat >>confdefs.h <<\EOF @@ -29585,13 +30090,13 @@ fi fi # clock_gettime() / librt -echo "$as_me:29588: checking for clock_gettime" >&5 +echo "$as_me:30093: checking for clock_gettime" >&5 echo $ECHO_N "checking for clock_gettime... $ECHO_C" >&6 if test "${ac_cv_func_clock_gettime+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29594 "configure" +#line 30099 "configure" #include "confdefs.h" #define clock_gettime autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -29622,16 +30127,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29625: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30130: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29628: \$? = $ac_status" >&5 + echo "$as_me:30133: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29631: \"$ac_try\"") >&5 + { (eval echo "$as_me:30136: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29634: \$? = $ac_status" >&5 + echo "$as_me:30139: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_clock_gettime=yes else @@ -29641,7 +30146,7 @@ ac_cv_func_clock_gettime=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29644: result: $ac_cv_func_clock_gettime" >&5 +echo "$as_me:30149: result: $ac_cv_func_clock_gettime" >&5 echo "${ECHO_T}$ac_cv_func_clock_gettime" >&6 if test "$ac_cv_func_clock_gettime" = yes; then @@ -29651,7 +30156,7 @@ EOF else - echo "$as_me:29654: checking for clock_gettime in -lrt" >&5 + echo "$as_me:30159: checking for clock_gettime in -lrt" >&5 echo $ECHO_N "checking for clock_gettime in -lrt... $ECHO_C" >&6 if test "${ac_cv_lib_rt_clock_gettime+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -29659,7 +30164,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lrt $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 29662 "configure" +#line 30167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -29678,16 +30183,16 @@ clock_gettime (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29681: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30186: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29684: \$? = $ac_status" >&5 + echo "$as_me:30189: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29687: \"$ac_try\"") >&5 + { (eval echo "$as_me:30192: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29690: \$? = $ac_status" >&5 + echo "$as_me:30195: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_rt_clock_gettime=yes else @@ -29698,7 +30203,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:29701: result: $ac_cv_lib_rt_clock_gettime" >&5 +echo "$as_me:30206: result: $ac_cv_lib_rt_clock_gettime" >&5 echo "${ECHO_T}$ac_cv_lib_rt_clock_gettime" >&6 if test "$ac_cv_lib_rt_clock_gettime" = yes; then cat >>confdefs.h <<\EOF @@ -29711,15 +30216,15 @@ fi fi -echo "$as_me:29714: checking for memset_s" >&5 +echo "$as_me:30219: checking for memset_s" >&5 echo $ECHO_N "checking for memset_s... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - echo "$as_me:29717: result: unknown" >&5 + echo "$as_me:30222: result: unknown" >&5 echo "${ECHO_T}unknown" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29722 "configure" +#line 30227 "configure" #include "confdefs.h" /* Request C11 Annex K */ @@ -29734,18 +30239,18 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:29737: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30242: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29740: \$? = $ac_status" >&5 + echo "$as_me:30245: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:29742: \"$ac_try\"") >&5 + { (eval echo "$as_me:30247: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29745: \$? = $ac_status" >&5 + echo "$as_me:30250: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:29748: result: yes" >&5 + echo "$as_me:30253: result: yes" >&5 echo "${ECHO_T}yes" >&6 cat >>confdefs.h <<\EOF @@ -29756,19 +30261,19 @@ else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "$as_me:29759: result: no" >&5 +echo "$as_me:30264: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f core ./core.* ./*.core "conftest$ac_exeext" "conftest.$ac_objext" "conftest.$ac_ext" fi - echo "$as_me:29765: checking for wide char and multibyte support" >&5 + echo "$as_me:30270: checking for wide char and multibyte support" >&5 echo $ECHO_N "checking for wide char and multibyte support... $ECHO_C" >&6 if test "${am_cv_multibyte_able+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29771 "configure" +#line 30276 "configure" #include "confdefs.h" #include #ifdef HAVE_STDLIB_H @@ -29827,16 +30332,16 @@ const char icb[5] = {0xa4, 0xa4, 0xa4, 0 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29830: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30335: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29833: \$? = $ac_status" >&5 + echo "$as_me:30338: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29836: \"$ac_try\"") >&5 + { (eval echo "$as_me:30341: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29839: \$? = $ac_status" >&5 + echo "$as_me:30344: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_multibyte_able=yes else @@ -29845,7 +30350,7 @@ cat "conftest.$ac_ext" >&5 cf_save_LIBS="$LIBS" LIBS="-lutf8 $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 29848 "configure" +#line 30353 "configure" #include "confdefs.h" #include int @@ -29894,16 +30399,16 @@ const char icb[5] = {0xa4, 0xa4, 0xa4, 0 } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:29897: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30402: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:29900: \$? = $ac_status" >&5 + echo "$as_me:30405: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:29903: \"$ac_try\"") >&5 + { (eval echo "$as_me:30408: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29906: \$? = $ac_status" >&5 + echo "$as_me:30411: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_multibyte_able=libutf8 else @@ -29918,7 +30423,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:29921: result: $am_cv_multibyte_able" >&5 +echo "$as_me:30426: result: $am_cv_multibyte_able" >&5 echo "${ECHO_T}$am_cv_multibyte_able" >&6 if test "$am_cv_multibyte_able" != no; then if test "$am_cv_multibyte_able" = libutf8; then @@ -29936,10 +30441,10 @@ EOF fi -echo "$as_me:29939: checking if gettimeofday takes two arguments" >&5 +echo "$as_me:30444: checking if gettimeofday takes two arguments" >&5 echo $ECHO_N "checking if gettimeofday takes two arguments... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 29942 "configure" +#line 30447 "configure" #include "confdefs.h" $ac_includes_default @@ -29956,16 +30461,16 @@ gettimeofday(&tv, NULL); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:29959: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:30464: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:29962: \$? = $ac_status" >&5 + echo "$as_me:30467: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:29965: \"$ac_try\"") >&5 + { (eval echo "$as_me:30470: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:29968: \$? = $ac_status" >&5 + echo "$as_me:30473: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_gettimeofday_2args=yes else @@ -29974,7 +30479,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_func_gettimeofday_2args=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:29977: result: $ac_cv_func_gettimeofday_2args" >&5 +echo "$as_me:30482: result: $ac_cv_func_gettimeofday_2args" >&5 echo "${ECHO_T}$ac_cv_func_gettimeofday_2args" >&6 if test $ac_cv_func_gettimeofday_2args = yes; then @@ -29984,13 +30489,13 @@ EOF fi -echo "$as_me:29987: checking return type of signal handlers" >&5 +echo "$as_me:30492: checking return type of signal handlers" >&5 echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 if test "${ac_cv_type_signal+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 29993 "configure" +#line 30498 "configure" #include "confdefs.h" #include #include @@ -30008,16 +30513,16 @@ int i = 0; (void) i } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30011: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:30516: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30014: \$? = $ac_status" >&5 + echo "$as_me:30519: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30017: \"$ac_try\"") >&5 + { (eval echo "$as_me:30522: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30020: \$? = $ac_status" >&5 + echo "$as_me:30525: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_type_signal=void else @@ -30027,14 +30532,14 @@ ac_cv_type_signal=int fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:30030: result: $ac_cv_type_signal" >&5 +echo "$as_me:30535: result: $ac_cv_type_signal" >&5 echo "${ECHO_T}$ac_cv_type_signal" >&6 cat >>confdefs.h <&5 +echo "$as_me:30542: checking declaration of signal arguments" >&5 echo $ECHO_N "checking declaration of signal arguments... $ECHO_C" >&6 if test "${cf_cv_sig_args+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -30044,7 +30549,7 @@ cf_cv_sig_args= for cf_test in "int sig" "int sig, ..." do cat >"conftest.$ac_ext" <<_ACEOF -#line 30047 "configure" +#line 30552 "configure" #include "confdefs.h" #include @@ -30057,16 +30562,16 @@ extern RETSIGTYPE catch($cf_test); signa } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30060: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:30565: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30063: \$? = $ac_status" >&5 + echo "$as_me:30568: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30066: \"$ac_try\"") >&5 + { (eval echo "$as_me:30571: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30069: \$? = $ac_status" >&5 + echo "$as_me:30574: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sig_args="$cf_test";break else @@ -30078,7 +30583,7 @@ done fi -echo "$as_me:30081: result: $cf_cv_sig_args" >&5 +echo "$as_me:30586: result: $cf_cv_sig_args" >&5 echo "${ECHO_T}$cf_cv_sig_args" >&6 cat >>confdefs.h <&5 +echo "$as_me:30595: checking whether sigaction needs _POSIX_SOURCE" >&5 echo $ECHO_N "checking whether sigaction needs _POSIX_SOURCE... $ECHO_C" >&6 if test "${cf_cv_sigact_bad+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30097 "configure" +#line 30602 "configure" #include "confdefs.h" #include @@ -30108,16 +30613,16 @@ struct sigaction act } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30111: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:30616: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30114: \$? = $ac_status" >&5 + echo "$as_me:30619: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30117: \"$ac_try\"") >&5 + { (eval echo "$as_me:30622: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30120: \$? = $ac_status" >&5 + echo "$as_me:30625: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sigact_bad=no else @@ -30128,7 +30633,7 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:30131: result: $cf_cv_sigact_bad" >&5 +echo "$as_me:30636: result: $cf_cv_sigact_bad" >&5 echo "${ECHO_T}$cf_cv_sigact_bad" >&6 test "$cf_cv_sigact_bad" = yes && @@ -30136,14 +30641,14 @@ cat >>confdefs.h <<\EOF #define SVR4_ACTION 1 EOF -echo "$as_me:30139: checking if we have sigaction/related functions" >&5 +echo "$as_me:30644: checking if we have sigaction/related functions" >&5 echo $ECHO_N "checking if we have sigaction/related functions... $ECHO_C" >&6 if test "${cf_cv_sigaction_funcs+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30146 "configure" +#line 30651 "configure" #include "confdefs.h" #ifdef SVR4_ACTION @@ -30166,16 +30671,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:30169: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30674: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30172: \$? = $ac_status" >&5 + echo "$as_me:30677: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:30175: \"$ac_try\"") >&5 + { (eval echo "$as_me:30680: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30178: \$? = $ac_status" >&5 + echo "$as_me:30683: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sigaction_funcs=yes else @@ -30185,7 +30690,7 @@ cf_cv_sigaction_funcs=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:30188: result: $cf_cv_sigaction_funcs" >&5 +echo "$as_me:30693: result: $cf_cv_sigaction_funcs" >&5 echo "${ECHO_T}$cf_cv_sigaction_funcs" >&6 test "$cf_cv_sigaction_funcs" = yes && @@ -30195,7 +30700,7 @@ EOF fi -echo "$as_me:30198: checking for fork" >&5 +echo "$as_me:30703: checking for fork" >&5 echo $ECHO_N "checking for fork... $ECHO_C" >&6 if test "${cf_cv_func_fork+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -30205,7 +30710,7 @@ if test "$cross_compiling" = yes; then cf_cv_func_fork=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 30208 "configure" +#line 30713 "configure" #include "confdefs.h" $ac_includes_default @@ -30217,15 +30722,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:30220: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30725: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30223: \$? = $ac_status" >&5 + echo "$as_me:30728: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:30225: \"$ac_try\"") >&5 + { (eval echo "$as_me:30730: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30228: \$? = $ac_status" >&5 + echo "$as_me:30733: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_func_fork=yes else @@ -30238,19 +30743,19 @@ rm -f core ./core.* ./*.core "conftest$a fi fi -echo "$as_me:30241: result: $cf_cv_func_fork" >&5 +echo "$as_me:30746: result: $cf_cv_func_fork" >&5 echo "${ECHO_T}$cf_cv_func_fork" >&6 test $cf_cv_func_fork = yes && cat >>confdefs.h <<\EOF #define HAVE_FORK 1 EOF -echo "$as_me:30247: checking for memmove" >&5 +echo "$as_me:30752: checking for memmove" >&5 echo $ECHO_N "checking for memmove... $ECHO_C" >&6 if test "${ac_cv_func_memmove+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30253 "configure" +#line 30758 "configure" #include "confdefs.h" #define memmove autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -30281,16 +30786,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:30284: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30789: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30287: \$? = $ac_status" >&5 + echo "$as_me:30792: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:30290: \"$ac_try\"") >&5 + { (eval echo "$as_me:30795: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30293: \$? = $ac_status" >&5 + echo "$as_me:30798: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_memmove=yes else @@ -30300,19 +30805,19 @@ ac_cv_func_memmove=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:30303: result: $ac_cv_func_memmove" >&5 +echo "$as_me:30808: result: $ac_cv_func_memmove" >&5 echo "${ECHO_T}$ac_cv_func_memmove" >&6 if test "$ac_cv_func_memmove" = yes; then : else -echo "$as_me:30309: checking for bcopy" >&5 +echo "$as_me:30814: checking for bcopy" >&5 echo $ECHO_N "checking for bcopy... $ECHO_C" >&6 if test "${ac_cv_func_bcopy+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30315 "configure" +#line 30820 "configure" #include "confdefs.h" #define bcopy autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -30343,16 +30848,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:30346: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30851: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30349: \$? = $ac_status" >&5 + echo "$as_me:30854: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:30352: \"$ac_try\"") >&5 + { (eval echo "$as_me:30857: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30355: \$? = $ac_status" >&5 + echo "$as_me:30860: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_bcopy=yes else @@ -30362,11 +30867,11 @@ ac_cv_func_bcopy=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:30365: result: $ac_cv_func_bcopy" >&5 +echo "$as_me:30870: result: $ac_cv_func_bcopy" >&5 echo "${ECHO_T}$ac_cv_func_bcopy" >&6 if test "$ac_cv_func_bcopy" = yes; then - echo "$as_me:30369: checking if bcopy does overlapping moves" >&5 + echo "$as_me:30874: checking if bcopy does overlapping moves" >&5 echo $ECHO_N "checking if bcopy does overlapping moves... $ECHO_C" >&6 if test "${cf_cv_good_bcopy+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -30376,7 +30881,7 @@ else cf_cv_good_bcopy=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 30379 "configure" +#line 30884 "configure" #include "confdefs.h" $ac_includes_default @@ -30392,15 +30897,15 @@ int main(void) { _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:30395: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30900: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30398: \$? = $ac_status" >&5 + echo "$as_me:30903: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:30400: \"$ac_try\"") >&5 + { (eval echo "$as_me:30905: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30403: \$? = $ac_status" >&5 + echo "$as_me:30908: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_good_bcopy=yes else @@ -30413,7 +30918,7 @@ rm -f core ./core.* ./*.core "conftest$a fi fi -echo "$as_me:30416: result: $cf_cv_good_bcopy" >&5 +echo "$as_me:30921: result: $cf_cv_good_bcopy" >&5 echo "${ECHO_T}$cf_cv_good_bcopy" >&6 else @@ -30436,10 +30941,10 @@ EOF fi -echo "$as_me:30439: checking if select expects int * arguments" >&5 +echo "$as_me:30944: checking if select expects int * arguments" >&5 echo $ECHO_N "checking if select expects int * arguments... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 30442 "configure" +#line 30947 "configure" #include "confdefs.h" #include @@ -30450,16 +30955,16 @@ if (eval "$ac_cpp conftest.$ac_ext") 2>& cat >>confdefs.h <<\EOF #define HAVE_SELECT_INTP 1 EOF - echo "$as_me:30453: result: yes" >&5 + echo "$as_me:30958: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:30456: result: no" >&5 + echo "$as_me:30961: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -rf conftest* -echo "$as_me:30462: checking whether closedir returns void" >&5 +echo "$as_me:30967: checking whether closedir returns void" >&5 echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6 if test "${ac_cv_func_closedir_void+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -30468,7 +30973,7 @@ else ac_cv_func_closedir_void=yes else cat >"conftest.$ac_ext" <<_ACEOF -#line 30471 "configure" +#line 30976 "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header_dirent> @@ -30485,15 +30990,15 @@ $ac_main_return (closedir (opendir (".") } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:30488: \"$ac_link\"") >&5 +if { (eval echo "$as_me:30993: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30491: \$? = $ac_status" >&5 + echo "$as_me:30996: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:30493: \"$ac_try\"") >&5 + { (eval echo "$as_me:30998: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30496: \$? = $ac_status" >&5 + echo "$as_me:31001: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_closedir_void=no else @@ -30505,7 +31010,7 @@ fi rm -f core ./core.* ./*.core "conftest$ac_exeext" "conftest.$ac_objext" "conftest.$ac_ext" fi fi -echo "$as_me:30508: result: $ac_cv_func_closedir_void" >&5 +echo "$as_me:31013: result: $ac_cv_func_closedir_void" >&5 echo "${ECHO_T}$ac_cv_func_closedir_void" >&6 if test $ac_cv_func_closedir_void = yes; then @@ -30517,18 +31022,18 @@ fi # autoconf 2.5x assumes setvbuf is not reversed when cross-compiling if test "$cross_compiling" != yes ; then - echo "$as_me:30520: checking whether setvbuf arguments are reversed" >&5 + echo "$as_me:31025: checking whether setvbuf arguments are reversed" >&5 echo $ECHO_N "checking whether setvbuf arguments are reversed... $ECHO_C" >&6 if test "${ac_cv_func_setvbuf_reversed+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then - { { echo "$as_me:30526: error: cannot run test program while cross compiling" >&5 + { { echo "$as_me:31031: error: cannot run test program while cross compiling" >&5 echo "$as_me: error: cannot run test program while cross compiling" >&2;} { (exit 1); exit 1; }; } else cat >"conftest.$ac_ext" <<_ACEOF -#line 30531 "configure" +#line 31036 "configure" #include "confdefs.h" #include /* If setvbuf has the reversed format, exit 0. */ @@ -30545,15 +31050,15 @@ main (void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:30548: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31053: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30551: \$? = $ac_status" >&5 + echo "$as_me:31056: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:30553: \"$ac_try\"") >&5 + { (eval echo "$as_me:31058: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30556: \$? = $ac_status" >&5 + echo "$as_me:31061: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_setvbuf_reversed=yes else @@ -30566,7 +31071,7 @@ rm -f core ./core.* ./*.core "conftest$a fi rm -f core ./core.* ./*.core fi -echo "$as_me:30569: result: $ac_cv_func_setvbuf_reversed" >&5 +echo "$as_me:31074: result: $ac_cv_func_setvbuf_reversed" >&5 echo "${ECHO_T}$ac_cv_func_setvbuf_reversed" >&6 if test $ac_cv_func_setvbuf_reversed = yes; then @@ -30587,19 +31092,21 @@ for ac_func in \ gethostbyname \ getpeername \ getservbyname \ + getsockopt \ inet_addr \ inet_ntoa \ + setsockopt \ strncasecmp \ do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:30596: checking for $ac_func" >&5 +echo "$as_me:31103: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30602 "configure" +#line 31109 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -30630,16 +31137,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:30633: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31140: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30636: \$? = $ac_status" >&5 + echo "$as_me:31143: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:30639: \"$ac_try\"") >&5 + { (eval echo "$as_me:31146: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30642: \$? = $ac_status" >&5 + echo "$as_me:31149: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -30649,7 +31156,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:30652: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:31159: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:31169: checking for type sigaction_t" >&5 echo $ECHO_N "checking for type sigaction_t... $ECHO_C" >&6 if test "${cf_cv_type_sigaction+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30669 "configure" +#line 31176 "configure" #include "confdefs.h" #include @@ -30679,16 +31186,16 @@ sigaction_t x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30682: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:31189: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30685: \$? = $ac_status" >&5 + echo "$as_me:31192: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30688: \"$ac_try\"") >&5 + { (eval echo "$as_me:31195: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30691: \$? = $ac_status" >&5 + echo "$as_me:31198: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_sigaction=yes else @@ -30699,21 +31206,21 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:30702: result: $cf_cv_type_sigaction" >&5 +echo "$as_me:31209: result: $cf_cv_type_sigaction" >&5 echo "${ECHO_T}$cf_cv_type_sigaction" >&6 test "$cf_cv_type_sigaction" = yes && cat >>confdefs.h <<\EOF #define HAVE_TYPE_SIGACTION 1 EOF -echo "$as_me:30709: checking for nonconflicting termios.h" >&5 +echo "$as_me:31216: checking for nonconflicting termios.h" >&5 echo $ECHO_N "checking for nonconflicting termios.h... $ECHO_C" >&6 if test "${cf_cv_use_termios_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30716 "configure" +#line 31223 "configure" #include "confdefs.h" #ifdef HAVE_IOCTL_H @@ -30740,16 +31247,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:30743: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31250: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:30746: \$? = $ac_status" >&5 + echo "$as_me:31253: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:30749: \"$ac_try\"") >&5 + { (eval echo "$as_me:31256: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30752: \$? = $ac_status" >&5 + echo "$as_me:31259: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_use_termios_h=yes else @@ -30761,7 +31268,7 @@ rm -f "conftest.$ac_objext" "conftest$ac fi -echo "$as_me:30764: result: $cf_cv_use_termios_h" >&5 +echo "$as_me:31271: result: $cf_cv_use_termios_h" >&5 echo "${ECHO_T}$cf_cv_use_termios_h" >&6 if test $cf_cv_use_termios_h = yes; then @@ -30779,14 +31286,14 @@ EOF fi -echo "$as_me:30782: checking for passwd.pw_gecos" >&5 +echo "$as_me:31289: checking for passwd.pw_gecos" >&5 echo $ECHO_N "checking for passwd.pw_gecos... $ECHO_C" >&6 if test "${cf_cv_pw_gecos+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30789 "configure" +#line 31296 "configure" #include "confdefs.h" #include @@ -30803,16 +31310,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30806: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:31313: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30809: \$? = $ac_status" >&5 + echo "$as_me:31316: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30812: \"$ac_try\"") >&5 + { (eval echo "$as_me:31319: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30815: \$? = $ac_status" >&5 + echo "$as_me:31322: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_pw_gecos=yes else @@ -30822,21 +31329,21 @@ cf_cv_pw_gecos=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:30825: result: $cf_cv_pw_gecos" >&5 +echo "$as_me:31332: result: $cf_cv_pw_gecos" >&5 echo "${ECHO_T}$cf_cv_pw_gecos" >&6 test $cf_cv_pw_gecos = no && cat >>confdefs.h <<\EOF #define DONT_HAVE_PW_GECOS 1 EOF -echo "$as_me:30832: checking for tm.tm_gmtoff" >&5 +echo "$as_me:31339: checking for tm.tm_gmtoff" >&5 echo $ECHO_N "checking for tm.tm_gmtoff... $ECHO_C" >&6 if test "${cf_cv_tm_gmtoff+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30839 "configure" +#line 31346 "configure" #include "confdefs.h" #ifdef TIME_WITH_SYS_TIME @@ -30861,16 +31368,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:30864: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:31371: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:30867: \$? = $ac_status" >&5 + echo "$as_me:31374: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:30870: \"$ac_try\"") >&5 + { (eval echo "$as_me:31377: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:30873: \$? = $ac_status" >&5 + echo "$as_me:31380: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_tm_gmtoff=yes else @@ -30881,14 +31388,14 @@ fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:30884: result: $cf_cv_tm_gmtoff" >&5 +echo "$as_me:31391: result: $cf_cv_tm_gmtoff" >&5 echo "${ECHO_T}$cf_cv_tm_gmtoff" >&6 test "$cf_cv_tm_gmtoff" = no && cat >>confdefs.h <<\EOF #define DONT_HAVE_TM_GMTOFF 1 EOF -echo "$as_me:30891: checking for long file names" >&5 +echo "$as_me:31398: checking for long file names" >&5 echo $ECHO_N "checking for long file names... $ECHO_C" >&6 if test "${ac_cv_sys_long_file_names+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -30927,7 +31434,7 @@ for ac_dir in . $ac_tmpdirs `eval echo rm -rf "$ac_xdir" 2>/dev/null done fi -echo "$as_me:30930: result: $ac_cv_sys_long_file_names" >&5 +echo "$as_me:31437: result: $ac_cv_sys_long_file_names" >&5 echo "${ECHO_T}$ac_cv_sys_long_file_names" >&6 if test "$ac_cv_sys_long_file_names" = yes; then @@ -30940,23 +31447,23 @@ fi for ac_header in sys/wait.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:30943: checking for $ac_header" >&5 +echo "$as_me:31450: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 30949 "configure" +#line 31456 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:30953: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:31460: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:30959: \$? = $ac_status" >&5 + echo "$as_me:31466: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -30975,7 +31482,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:30978: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:31485: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:31506: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31005 "configure" +#line 31512 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:31009: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:31516: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:31015: \$? = $ac_status" >&5 + echo "$as_me:31522: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -31031,7 +31538,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:31034: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:31541: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:31554: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31053 "configure" +#line 31560 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:31057: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:31564: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:31063: \$? = $ac_status" >&5 + echo "$as_me:31570: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -31079,7 +31586,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:31082: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:31589: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:31611: checking for union wait" >&5 echo $ECHO_N "checking for union wait... $ECHO_C" >&6 if test "${cf_cv_type_unionwait+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31111 "configure" +#line 31618 "configure" #include "confdefs.h" $cf_wait_headers int @@ -31127,16 +31634,16 @@ static int x; } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31130: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31637: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31133: \$? = $ac_status" >&5 + echo "$as_me:31640: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31136: \"$ac_try\"") >&5 + { (eval echo "$as_me:31643: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31139: \$? = $ac_status" >&5 + echo "$as_me:31646: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_unionwait=no echo compiles ok w/o union wait 1>&5 @@ -31146,7 +31653,7 @@ else cat "conftest.$ac_ext" >&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 31149 "configure" +#line 31656 "configure" #include "confdefs.h" $cf_wait_headers int @@ -31173,16 +31680,16 @@ union wait x; } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31176: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31683: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31179: \$? = $ac_status" >&5 + echo "$as_me:31686: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31182: \"$ac_try\"") >&5 + { (eval echo "$as_me:31689: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31185: \$? = $ac_status" >&5 + echo "$as_me:31692: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_unionwait=yes echo compiles ok with union wait and possibly macros too 1>&5 @@ -31197,14 +31704,14 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:31200: result: $cf_cv_type_unionwait" >&5 +echo "$as_me:31707: result: $cf_cv_type_unionwait" >&5 echo "${ECHO_T}$cf_cv_type_unionwait" >&6 test "$cf_cv_type_unionwait" = yes && cat >>confdefs.h <<\EOF #define HAVE_TYPE_UNIONWAIT 1 EOF -echo "$as_me:31207: checking if the system function returns usable child-status" >&5 +echo "$as_me:31714: checking if the system function returns usable child-status" >&5 echo $ECHO_N "checking if the system function returns usable child-status... $ECHO_C" >&6 if test "${cf_cv_system_status+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -31214,7 +31721,7 @@ else cf_cv_system_status=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 31217 "configure" +#line 31724 "configure" #include "confdefs.h" $ac_includes_default @@ -31249,15 +31756,15 @@ int main(void) _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:31252: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31759: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31255: \$? = $ac_status" >&5 + echo "$as_me:31762: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:31257: \"$ac_try\"") >&5 + { (eval echo "$as_me:31764: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31260: \$? = $ac_status" >&5 + echo "$as_me:31767: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_system_status=no else @@ -31268,7 +31775,7 @@ if test "$cross_compiling" = yes; then cf_cv_system_status=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 31271 "configure" +#line 31778 "configure" #include "confdefs.h" $ac_includes_default @@ -31276,15 +31783,15 @@ $ac_includes_default int main(void) { ${cf_cv_main_return:-return}(system("exit 23") != (23 << 8)); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:31279: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31786: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31282: \$? = $ac_status" >&5 + echo "$as_me:31789: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:31284: \"$ac_try\"") >&5 + { (eval echo "$as_me:31791: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31287: \$? = $ac_status" >&5 + echo "$as_me:31794: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_system_status=yes else @@ -31301,7 +31808,7 @@ fi fi -echo "$as_me:31304: result: $cf_cv_system_status" >&5 +echo "$as_me:31811: result: $cf_cv_system_status" >&5 echo "${ECHO_T}$cf_cv_system_status" >&6 test $cf_cv_system_status = no && cat >>confdefs.h <<\EOF @@ -31324,14 +31831,14 @@ EOF else if test "$cf_cv_ncurses_version" != no ; then -echo "$as_me:31327: checking for obsolete/broken version of ncurses" >&5 +echo "$as_me:31834: checking for obsolete/broken version of ncurses" >&5 echo $ECHO_N "checking for obsolete/broken version of ncurses... $ECHO_C" >&6 if test "${cf_cv_ncurses_broken+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31334 "configure" +#line 31841 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> @@ -31350,16 +31857,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:31353: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:31860: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:31356: \$? = $ac_status" >&5 + echo "$as_me:31863: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:31359: \"$ac_try\"") >&5 + { (eval echo "$as_me:31866: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31362: \$? = $ac_status" >&5 + echo "$as_me:31869: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_ncurses_broken=no else @@ -31371,10 +31878,10 @@ rm -f "conftest.$ac_objext" "conftest.$a fi -echo "$as_me:31374: result: $cf_cv_ncurses_broken" >&5 +echo "$as_me:31881: result: $cf_cv_ncurses_broken" >&5 echo "${ECHO_T}$cf_cv_ncurses_broken" >&6 if test "$cf_cv_ncurses_broken" = yes ; then - { echo "$as_me:31377: WARNING: hmm... you should get an up-to-date version of ncurses" >&5 + { echo "$as_me:31884: WARNING: hmm... you should get an up-to-date version of ncurses" >&5 echo "$as_me: WARNING: hmm... you should get an up-to-date version of ncurses" >&2;} cat >>confdefs.h <<\EOF @@ -31384,14 +31891,14 @@ EOF fi fi -echo "$as_me:31387: checking if curses supports color attributes" >&5 +echo "$as_me:31894: checking if curses supports color attributes" >&5 echo $ECHO_N "checking if curses supports color attributes... $ECHO_C" >&6 if test "${cf_cv_color_curses+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31394 "configure" +#line 31901 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> @@ -31412,16 +31919,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31415: \"$ac_link\"") >&5 +if { (eval echo "$as_me:31922: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31418: \$? = $ac_status" >&5 + echo "$as_me:31925: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31421: \"$ac_try\"") >&5 + { (eval echo "$as_me:31928: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31424: \$? = $ac_status" >&5 + echo "$as_me:31931: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_color_curses=yes else @@ -31433,7 +31940,7 @@ rm -f "conftest.$ac_objext" "conftest$ac fi -echo "$as_me:31436: result: $cf_cv_color_curses" >&5 +echo "$as_me:31943: result: $cf_cv_color_curses" >&5 echo "${ECHO_T}$cf_cv_color_curses" >&6 if test "$cf_cv_color_curses" = yes ; then @@ -31454,7 +31961,7 @@ fi EOF else - { echo "$as_me:31457: WARNING: This curses library does not support color" >&5 + { echo "$as_me:31964: WARNING: This curses library does not support color" >&5 echo "$as_me: WARNING: This curses library does not support color" >&2;} fi fi @@ -31473,7 +31980,7 @@ fi if test $check_sig_const = yes ; then -echo "$as_me:31476: checking for redefinable signal constants" >&5 +echo "$as_me:31983: checking for redefinable signal constants" >&5 echo $ECHO_N "checking for redefinable signal constants... $ECHO_C" >&6 if test "${cf_cv_sig_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -31486,7 +31993,7 @@ if test -n "$cf_cv_sig_args"; then cf_cv_sig_const=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 31489 "configure" +#line 31996 "configure" #include "confdefs.h" #define NEW_DFL ((RETSIGTYPE (*)($cf_test))0) @@ -31514,15 +32021,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:31517: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32024: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31520: \$? = $ac_status" >&5 + echo "$as_me:32027: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:31522: \"$ac_try\"") >&5 + { (eval echo "$as_me:32029: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31525: \$? = $ac_status" >&5 + echo "$as_me:32032: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_sig_const=yes else @@ -31537,7 +32044,7 @@ fi fi -echo "$as_me:31540: result: $cf_cv_sig_const" >&5 +echo "$as_me:32047: result: $cf_cv_sig_const" >&5 echo "${ECHO_T}$cf_cv_sig_const" >&6 test "$cf_cv_sig_const" = yes && cat >>confdefs.h <<\EOF @@ -31546,14 +32053,14 @@ EOF fi -echo "$as_me:31549: checking for ANSI qsort" >&5 +echo "$as_me:32056: checking for ANSI qsort" >&5 echo $ECHO_N "checking for ANSI qsort... $ECHO_C" >&6 if test "${cf_cv_comptype+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 31556 "configure" +#line 32063 "configure" #include "confdefs.h" $ac_includes_default @@ -31569,16 +32076,16 @@ static char foo[] = "string"; } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:31572: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32079: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:31575: \$? = $ac_status" >&5 + echo "$as_me:32082: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:31578: \"$ac_try\"") >&5 + { (eval echo "$as_me:32085: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31581: \$? = $ac_status" >&5 + echo "$as_me:32088: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_comptype=yes else @@ -31590,7 +32097,7 @@ rm -f "conftest.$ac_objext" "conftest.$a fi -echo "$as_me:31593: result: $cf_cv_comptype" >&5 +echo "$as_me:32100: result: $cf_cv_comptype" >&5 echo "${ECHO_T}$cf_cv_comptype" >&6 if test $cf_cv_comptype = yes; then @@ -31606,7 +32113,7 @@ EOF fi -echo "$as_me:31609: checking if application can dump core" >&5 +echo "$as_me:32116: checking if application can dump core" >&5 echo $ECHO_N "checking if application can dump core... $ECHO_C" >&6 if test "${cf_cv_corefile+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -31616,7 +32123,7 @@ else cf_cv_corefile=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 31619 "configure" +#line 32126 "configure" #include "confdefs.h" $ac_includes_default @@ -31660,15 +32167,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:31663: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32170: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31666: \$? = $ac_status" >&5 + echo "$as_me:32173: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:31668: \"$ac_try\"") >&5 + { (eval echo "$as_me:32175: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31671: \$? = $ac_status" >&5 + echo "$as_me:32178: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_corefile=yes else @@ -31681,7 +32188,7 @@ rm -f core ./core.* ./*.core "conftest$a fi fi -echo "$as_me:31684: result: $cf_cv_corefile" >&5 +echo "$as_me:32191: result: $cf_cv_corefile" >&5 echo "${ECHO_T}$cf_cv_corefile" >&6 test $cf_cv_corefile = yes && cat >>confdefs.h <<\EOF @@ -31718,18 +32225,18 @@ do ac_tr_func=`echo "$ac_func" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` -echo "$as_me:31721: checking for missing \"${ac_func}\" extern" >&5 +echo "$as_me:32228: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:31727: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32234: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 31732 "configure" +#line 32239 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -31747,16 +32254,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31750: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32257: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31753: \$? = $ac_status" >&5 + echo "$as_me:32260: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31756: \"$ac_try\"") >&5 + { (eval echo "$as_me:32263: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31759: \$? = $ac_status" >&5 + echo "$as_me:32266: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -31764,7 +32271,7 @@ if { (eval echo "$as_me:31750: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 31767 "configure" +#line 32274 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -31779,16 +32286,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:31782: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32289: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:31785: \$? = $ac_status" >&5 + echo "$as_me:32292: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:31788: \"$ac_try\"") >&5 + { (eval echo "$as_me:32295: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31791: \$? = $ac_status" >&5 + echo "$as_me:32298: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -31812,7 +32319,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:31815: result: $cf_result" >&5 +echo "$as_me:32322: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32343: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:31842: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32349: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 31847 "configure" +#line 32354 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -31862,16 +32369,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31865: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32372: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31868: \$? = $ac_status" >&5 + echo "$as_me:32375: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31871: \"$ac_try\"") >&5 + { (eval echo "$as_me:32378: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31874: \$? = $ac_status" >&5 + echo "$as_me:32381: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -31879,7 +32386,7 @@ if { (eval echo "$as_me:31865: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 31882 "configure" +#line 32389 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -31894,16 +32401,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:31897: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32404: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:31900: \$? = $ac_status" >&5 + echo "$as_me:32407: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:31903: \"$ac_try\"") >&5 + { (eval echo "$as_me:32410: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31906: \$? = $ac_status" >&5 + echo "$as_me:32413: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -31927,7 +32434,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:31930: result: $cf_result" >&5 +echo "$as_me:32437: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32456: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:31955: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32462: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 31960 "configure" +#line 32467 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -31975,16 +32482,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:31978: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32485: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:31981: \$? = $ac_status" >&5 + echo "$as_me:32488: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:31984: \"$ac_try\"") >&5 + { (eval echo "$as_me:32491: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:31987: \$? = $ac_status" >&5 + echo "$as_me:32494: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -31992,7 +32499,7 @@ if { (eval echo "$as_me:31978: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 31995 "configure" +#line 32502 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -32007,16 +32514,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32010: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32517: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32013: \$? = $ac_status" >&5 + echo "$as_me:32520: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32016: \"$ac_try\"") >&5 + { (eval echo "$as_me:32523: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32019: \$? = $ac_status" >&5 + echo "$as_me:32526: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -32040,7 +32547,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:32043: result: $cf_result" >&5 +echo "$as_me:32550: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32630: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:32129: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32636: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 32134 "configure" +#line 32641 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -32149,16 +32656,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:32152: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32659: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32155: \$? = $ac_status" >&5 + echo "$as_me:32662: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:32158: \"$ac_try\"") >&5 + { (eval echo "$as_me:32665: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32161: \$? = $ac_status" >&5 + echo "$as_me:32668: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -32166,7 +32673,7 @@ if { (eval echo "$as_me:32152: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 32169 "configure" +#line 32676 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -32181,16 +32688,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32184: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32691: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32187: \$? = $ac_status" >&5 + echo "$as_me:32694: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32190: \"$ac_try\"") >&5 + { (eval echo "$as_me:32697: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32193: \$? = $ac_status" >&5 + echo "$as_me:32700: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -32214,7 +32721,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:32217: result: $cf_result" >&5 +echo "$as_me:32724: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32740: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:32239: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32746: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 32244 "configure" +#line 32751 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -32259,16 +32766,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:32262: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32769: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32265: \$? = $ac_status" >&5 + echo "$as_me:32772: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:32268: \"$ac_try\"") >&5 + { (eval echo "$as_me:32775: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32271: \$? = $ac_status" >&5 + echo "$as_me:32778: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -32276,7 +32783,7 @@ if { (eval echo "$as_me:32262: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 32279 "configure" +#line 32786 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -32291,16 +32798,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32294: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32801: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32297: \$? = $ac_status" >&5 + echo "$as_me:32804: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32300: \"$ac_try\"") >&5 + { (eval echo "$as_me:32807: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32303: \$? = $ac_status" >&5 + echo "$as_me:32810: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -32324,7 +32831,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:32327: result: $cf_result" >&5 +echo "$as_me:32834: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32854: checking for missing \"${ac_func}\" extern" >&5 echo $ECHO_N "checking for missing \"${ac_func}\" extern... $ECHO_C" >&6 if eval "test \"\${cf_cv_func_${ac_func}+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:32353: testing for missing "${ac_func}" external ..." 1>&5 +echo "${as_me:-configure}:32860: testing for missing "${ac_func}" external ..." 1>&5 cf_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $CHECK_DECL_FLAG" cat >"conftest.$ac_ext" <<_ACEOF -#line 32358 "configure" +#line 32865 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -32373,16 +32880,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:32376: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32883: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32379: \$? = $ac_status" >&5 + echo "$as_me:32886: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:32382: \"$ac_try\"") >&5 + { (eval echo "$as_me:32889: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32385: \$? = $ac_status" >&5 + echo "$as_me:32892: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then if test -n "$CHECK_DECL_HDRS" ; then # try to work around system headers which are infested with non-standard syntax @@ -32390,7 +32897,7 @@ if { (eval echo "$as_me:32376: \"$ac_lin cf_1_up=`echo "${ac_func}" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` cat >"conftest.$ac_ext" <<_ACEOF -#line 32393 "configure" +#line 32900 "configure" #include "confdefs.h" #define DECL_${cf_1_up} @@ -32405,16 +32912,16 @@ long x = 0; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32408: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:32915: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32411: \$? = $ac_status" >&5 + echo "$as_me:32918: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32414: \"$ac_try\"") >&5 + { (eval echo "$as_me:32921: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32417: \$? = $ac_status" >&5 + echo "$as_me:32924: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval 'cf_cv_func_'${ac_func}'=yes' else @@ -32438,7 +32945,7 @@ CFLAGS="$cf_save_CFLAGS" fi eval 'cf_result=$cf_cv_func_'${ac_func} -echo "$as_me:32441: result: $cf_result" >&5 +echo "$as_me:32948: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 test $cf_result = yes && cat >>confdefs.h <&5 +echo "$as_me:32958: checking for working TIOCGWINSZ" >&5 echo $ECHO_N "checking for working TIOCGWINSZ... $ECHO_C" >&6 if test "${cf_cv_use_tiocgwinsz+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -32460,7 +32967,7 @@ else cf_cv_use_tiocgwinsz=unknown else cat >"conftest.$ac_ext" <<_ACEOF -#line 32463 "configure" +#line 32970 "configure" #include "confdefs.h" $CHECK_DECL_HDRS @@ -32486,15 +32993,15 @@ int main(void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:32489: \"$ac_link\"") >&5 +if { (eval echo "$as_me:32996: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32492: \$? = $ac_status" >&5 + echo "$as_me:32999: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:32494: \"$ac_try\"") >&5 + { (eval echo "$as_me:33001: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32497: \$? = $ac_status" >&5 + echo "$as_me:33004: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_use_tiocgwinsz=yes else @@ -32509,7 +33016,7 @@ fi CFLAGS="$cf_save_CFLAGS" fi -echo "$as_me:32512: result: $cf_cv_use_tiocgwinsz" >&5 +echo "$as_me:33019: result: $cf_cv_use_tiocgwinsz" >&5 echo "${ECHO_T}$cf_cv_use_tiocgwinsz" >&6 test $cf_cv_use_tiocgwinsz != yes && cat >>confdefs.h <<\EOF @@ -32546,7 +33053,7 @@ test -z "$ALL_LINGUAS" && ALL_LINGUAS=`t : ${CONFIG_H:=config.h} if test -z "$PACKAGE" ; then - { { echo "$as_me:32549: error: CF_BUNDLED_INTL used without setting PACKAGE variable" >&5 + { { echo "$as_me:33056: error: CF_BUNDLED_INTL used without setting PACKAGE variable" >&5 echo "$as_me: error: CF_BUNDLED_INTL used without setting PACKAGE variable" >&2;} { (exit 1); exit 1; }; } fi @@ -32598,7 +33105,7 @@ if test -n "$cf_searchpath/include" ; th CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 32601 "configure" +#line 33108 "configure" #include "confdefs.h" #include int @@ -32610,16 +33117,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32613: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:33120: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32616: \$? = $ac_status" >&5 + echo "$as_me:33123: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32619: \"$ac_try\"") >&5 + { (eval echo "$as_me:33126: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32622: \$? = $ac_status" >&5 + echo "$as_me:33129: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -32636,7 +33143,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:32639: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:33146: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -32682,7 +33189,7 @@ if test -n "$cf_searchpath/../include" ; CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 32685 "configure" +#line 33192 "configure" #include "confdefs.h" #include int @@ -32694,16 +33201,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:32697: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:33204: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:32700: \$? = $ac_status" >&5 + echo "$as_me:33207: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:32703: \"$ac_try\"") >&5 + { (eval echo "$as_me:33210: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32706: \$? = $ac_status" >&5 + echo "$as_me:33213: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -32720,7 +33227,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:32723: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:33230: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -32738,7 +33245,7 @@ echo "${as_me:-configure}:32723: testing fi else -{ { echo "$as_me:32741: error: cannot find libiconv under $withval" >&5 +{ { echo "$as_me:33248: error: cannot find libiconv under $withval" >&5 echo "$as_me: error: cannot find libiconv under $withval" >&2;} { (exit 1); exit 1; }; } fi @@ -32763,7 +33270,7 @@ if test -n "$cf_searchpath/lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:32766: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:33273: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -32792,7 +33299,7 @@ if test -n "$cf_searchpath" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:32795: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:33302: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -32801,7 +33308,7 @@ echo "${as_me:-configure}:32795: testing fi else -{ { echo "$as_me:32804: error: cannot find libiconv under $withval" >&5 +{ { echo "$as_me:33311: error: cannot find libiconv under $withval" >&5 echo "$as_me: error: cannot find libiconv under $withval" >&2;} { (exit 1); exit 1; }; } fi @@ -32809,14 +33316,14 @@ done test -n "$verbose" && echo " setting path value for libiconv to $withval" 1>&6 -echo "${as_me:-configure}:32812: testing setting path value for libiconv to $withval ..." 1>&5 +echo "${as_me:-configure}:33319: testing setting path value for libiconv to $withval ..." 1>&5 ;; esac fi; - echo "$as_me:32819: checking for iconv" >&5 + echo "$as_me:33326: checking for iconv" >&5 echo $ECHO_N "checking for iconv... $ECHO_C" >&6 if test "${am_cv_func_iconv+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -32827,12 +33334,12 @@ else cf_cv_header_path_iconv= cf_cv_library_path_iconv= -echo "${as_me:-configure}:32830: testing Starting FIND_LINKAGE(iconv,) ..." 1>&5 +echo "${as_me:-configure}:33337: testing Starting FIND_LINKAGE(iconv,) ..." 1>&5 cf_save_LIBS="$LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 32835 "configure" +#line 33342 "configure" #include "confdefs.h" #include @@ -32851,16 +33358,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:32854: \"$ac_link\"") >&5 +if { (eval echo "$as_me:33361: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32857: \$? = $ac_status" >&5 + echo "$as_me:33364: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:32860: \"$ac_try\"") >&5 + { (eval echo "$as_me:33367: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32863: \$? = $ac_status" >&5 + echo "$as_me:33370: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_iconv=yes @@ -32874,7 +33381,7 @@ cat "conftest.$ac_ext" >&5 LIBS="-liconv $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 32877 "configure" +#line 33384 "configure" #include "confdefs.h" #include @@ -32893,16 +33400,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:32896: \"$ac_link\"") >&5 +if { (eval echo "$as_me:33403: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:32899: \$? = $ac_status" >&5 + echo "$as_me:33406: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:32902: \"$ac_try\"") >&5 + { (eval echo "$as_me:33409: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:32905: \$? = $ac_status" >&5 + echo "$as_me:33412: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_iconv=yes @@ -32919,9 +33426,9 @@ cat "conftest.$ac_ext" >&5 test -n "$verbose" && echo " find linkage for iconv library" 1>&6 -echo "${as_me:-configure}:32922: testing find linkage for iconv library ..." 1>&5 +echo "${as_me:-configure}:33429: testing find linkage for iconv library ..." 1>&5 -echo "${as_me:-configure}:32924: testing Searching for headers in FIND_LINKAGE(iconv,) ..." 1>&5 +echo "${as_me:-configure}:33431: testing Searching for headers in FIND_LINKAGE(iconv,) ..." 1>&5 cf_save_CPPFLAGS="$CPPFLAGS" cf_test_CPPFLAGS="$CPPFLAGS" @@ -33012,7 +33519,7 @@ cf_search="$cf_search $cf_header_path_li if test -d "$cf_cv_header_path_iconv" ; then test -n "$verbose" && echo " ... testing $cf_cv_header_path_iconv" 1>&6 -echo "${as_me:-configure}:33015: testing ... testing $cf_cv_header_path_iconv ..." 1>&5 +echo "${as_me:-configure}:33522: testing ... testing $cf_cv_header_path_iconv ..." 1>&5 CPPFLAGS="$cf_save_CPPFLAGS" @@ -33020,7 +33527,7 @@ echo "${as_me:-configure}:33015: testing CPPFLAGS="${CPPFLAGS}-I$cf_cv_header_path_iconv" cat >"conftest.$ac_ext" <<_ACEOF -#line 33023 "configure" +#line 33530 "configure" #include "confdefs.h" #include @@ -33039,21 +33546,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:33042: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:33549: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:33045: \$? = $ac_status" >&5 + echo "$as_me:33552: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:33048: \"$ac_try\"") >&5 + { (eval echo "$as_me:33555: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33051: \$? = $ac_status" >&5 + echo "$as_me:33558: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found iconv headers in $cf_cv_header_path_iconv" 1>&6 -echo "${as_me:-configure}:33056: testing ... found iconv headers in $cf_cv_header_path_iconv ..." 1>&5 +echo "${as_me:-configure}:33563: testing ... found iconv headers in $cf_cv_header_path_iconv ..." 1>&5 cf_cv_find_linkage_iconv=maybe cf_test_CPPFLAGS="$CPPFLAGS" @@ -33071,7 +33578,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_cv_find_linkage_iconv" = maybe ; then -echo "${as_me:-configure}:33074: testing Searching for iconv library in FIND_LINKAGE(iconv,) ..." 1>&5 +echo "${as_me:-configure}:33581: testing Searching for iconv library in FIND_LINKAGE(iconv,) ..." 1>&5 cf_save_LIBS="$LIBS" cf_save_LDFLAGS="$LDFLAGS" @@ -33146,13 +33653,13 @@ cf_search="$cf_library_path_list $cf_sea if test -d "$cf_cv_library_path_iconv" ; then test -n "$verbose" && echo " ... testing $cf_cv_library_path_iconv" 1>&6 -echo "${as_me:-configure}:33149: testing ... testing $cf_cv_library_path_iconv ..." 1>&5 +echo "${as_me:-configure}:33656: testing ... testing $cf_cv_library_path_iconv ..." 1>&5 CPPFLAGS="$cf_test_CPPFLAGS" LIBS="-liconv $cf_save_LIBS" LDFLAGS="$cf_save_LDFLAGS -L$cf_cv_library_path_iconv" cat >"conftest.$ac_ext" <<_ACEOF -#line 33155 "configure" +#line 33662 "configure" #include "confdefs.h" #include @@ -33171,21 +33678,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:33174: \"$ac_link\"") >&5 +if { (eval echo "$as_me:33681: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:33177: \$? = $ac_status" >&5 + echo "$as_me:33684: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:33180: \"$ac_try\"") >&5 + { (eval echo "$as_me:33687: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33183: \$? = $ac_status" >&5 + echo "$as_me:33690: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found iconv library in $cf_cv_library_path_iconv" 1>&6 -echo "${as_me:-configure}:33188: testing ... found iconv library in $cf_cv_library_path_iconv ..." 1>&5 +echo "${as_me:-configure}:33695: testing ... found iconv library in $cf_cv_library_path_iconv ..." 1>&5 cf_cv_find_linkage_iconv=yes cf_cv_library_file_iconv="-liconv" @@ -33225,7 +33732,7 @@ am_cv_func_iconv="no, consider installin fi fi -echo "$as_me:33228: result: $am_cv_func_iconv" >&5 +echo "$as_me:33735: result: $am_cv_func_iconv" >&5 echo "${ECHO_T}$am_cv_func_iconv" >&6 if test "$am_cv_func_iconv" = yes; then @@ -33234,14 +33741,14 @@ cat >>confdefs.h <<\EOF #define HAVE_ICONV 1 EOF - echo "$as_me:33237: checking if the declaration of iconv() needs const." >&5 + echo "$as_me:33744: checking if the declaration of iconv() needs const." >&5 echo $ECHO_N "checking if the declaration of iconv() needs const.... $ECHO_C" >&6 if test "${am_cv_proto_iconv_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 33244 "configure" +#line 33751 "configure" #include "confdefs.h" #include @@ -33266,16 +33773,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:33269: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:33776: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:33272: \$? = $ac_status" >&5 + echo "$as_me:33779: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:33275: \"$ac_try\"") >&5 + { (eval echo "$as_me:33782: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33278: \$? = $ac_status" >&5 + echo "$as_me:33785: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_proto_iconv_const=no else @@ -33285,7 +33792,7 @@ am_cv_proto_iconv_const=yes fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:33288: result: $am_cv_proto_iconv_const" >&5 +echo "$as_me:33795: result: $am_cv_proto_iconv_const" >&5 echo "${ECHO_T}$am_cv_proto_iconv_const" >&6 if test "$am_cv_proto_iconv_const" = yes ; then @@ -33330,7 +33837,7 @@ if test -n "$cf_cv_header_path_iconv" ; CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 33333 "configure" +#line 33840 "configure" #include "confdefs.h" #include int @@ -33342,16 +33849,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:33345: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:33852: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:33348: \$? = $ac_status" >&5 + echo "$as_me:33855: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:33351: \"$ac_try\"") >&5 + { (eval echo "$as_me:33858: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33354: \$? = $ac_status" >&5 + echo "$as_me:33861: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -33368,7 +33875,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:33371: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:33878: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -33407,7 +33914,7 @@ if test -n "$cf_cv_library_path_iconv" ; if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:33410: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:33917: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -33418,13 +33925,13 @@ fi fi fi -echo "$as_me:33421: checking for nl_langinfo and CODESET" >&5 +echo "$as_me:33928: checking for nl_langinfo and CODESET" >&5 echo $ECHO_N "checking for nl_langinfo and CODESET... $ECHO_C" >&6 if test "${am_cv_langinfo_codeset+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 33427 "configure" +#line 33934 "configure" #include "confdefs.h" $ac_includes_default @@ -33438,16 +33945,16 @@ char* cs = nl_langinfo(CODESET); (void)c } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:33441: \"$ac_link\"") >&5 +if { (eval echo "$as_me:33948: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:33444: \$? = $ac_status" >&5 + echo "$as_me:33951: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:33447: \"$ac_try\"") >&5 + { (eval echo "$as_me:33954: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33450: \$? = $ac_status" >&5 + echo "$as_me:33957: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_langinfo_codeset=yes else @@ -33458,7 +33965,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:33461: result: $am_cv_langinfo_codeset" >&5 +echo "$as_me:33968: result: $am_cv_langinfo_codeset" >&5 echo "${ECHO_T}$am_cv_langinfo_codeset" >&6 if test "$am_cv_langinfo_codeset" = yes; then @@ -33469,13 +33976,13 @@ EOF fi if test "$ac_cv_header_locale_h" = yes; then - echo "$as_me:33472: checking for LC_MESSAGES" >&5 + echo "$as_me:33979: checking for LC_MESSAGES" >&5 echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6 if test "${am_cv_val_LC_MESSAGES+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 33478 "configure" +#line 33985 "configure" #include "confdefs.h" #include int @@ -33487,16 +33994,16 @@ return LC_MESSAGES } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:33490: \"$ac_link\"") >&5 +if { (eval echo "$as_me:33997: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:33493: \$? = $ac_status" >&5 + echo "$as_me:34000: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:33496: \"$ac_try\"") >&5 + { (eval echo "$as_me:34003: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33499: \$? = $ac_status" >&5 + echo "$as_me:34006: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then am_cv_val_LC_MESSAGES=yes else @@ -33506,7 +34013,7 @@ am_cv_val_LC_MESSAGES=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:33509: result: $am_cv_val_LC_MESSAGES" >&5 +echo "$as_me:34016: result: $am_cv_val_LC_MESSAGES" >&5 echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6 if test "$am_cv_val_LC_MESSAGES" = yes; then @@ -33516,7 +34023,7 @@ EOF fi fi - echo "$as_me:33519: checking whether NLS is requested" >&5 + echo "$as_me:34026: checking whether NLS is requested" >&5 echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 # Check whether --enable-nls or --disable-nls was given. @@ -33526,7 +34033,7 @@ if test "${enable_nls+set}" = set; then else USE_NLS=yes fi; - echo "$as_me:33529: result: $USE_NLS" >&5 + echo "$as_me:34036: result: $USE_NLS" >&5 echo "${ECHO_T}$USE_NLS" >&6 if test "$USE_NLS" = "yes"; then @@ -33534,7 +34041,7 @@ echo "${ECHO_T}$USE_NLS" >&6 # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 -echo "$as_me:33537: checking for $ac_word" >&5 +echo "$as_me:34044: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_MSGFMT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -33561,16 +34068,16 @@ esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != ":"; then - echo "$as_me:33564: result: $MSGFMT" >&5 + echo "$as_me:34071: result: $MSGFMT" >&5 echo "${ECHO_T}$MSGFMT" >&6 else - echo "$as_me:33567: result: no" >&5 + echo "$as_me:34074: result: no" >&5 echo "${ECHO_T}no" >&6 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 -echo "$as_me:33573: checking for $ac_word" >&5 +echo "$as_me:34080: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_GMSGFMT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -33587,7 +34094,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if $as_executable_p "$ac_dir/$ac_word"; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" - echo "$as_me:33590: found $ac_dir/$ac_word" >&5 + echo "$as_me:34097: found $ac_dir/$ac_word" >&5 break fi done @@ -33599,17 +34106,17 @@ fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then - echo "$as_me:33602: result: $GMSGFMT" >&5 + echo "$as_me:34109: result: $GMSGFMT" >&5 echo "${ECHO_T}$GMSGFMT" >&6 else - echo "$as_me:33605: result: no" >&5 + echo "$as_me:34112: result: no" >&5 echo "${ECHO_T}no" >&6 fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 -echo "$as_me:33612: checking for $ac_word" >&5 +echo "$as_me:34119: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_XGETTEXT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -33636,10 +34143,10 @@ esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then - echo "$as_me:33639: result: $XGETTEXT" >&5 + echo "$as_me:34146: result: $XGETTEXT" >&5 echo "${ECHO_T}$XGETTEXT" >&6 else - echo "$as_me:33642: result: no" >&5 + echo "$as_me:34149: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -33706,7 +34213,7 @@ if test -n "$cf_searchpath/include" ; th CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 33709 "configure" +#line 34216 "configure" #include "confdefs.h" #include int @@ -33718,16 +34225,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:33721: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:34228: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:33724: \$? = $ac_status" >&5 + echo "$as_me:34231: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:33727: \"$ac_try\"") >&5 + { (eval echo "$as_me:34234: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33730: \$? = $ac_status" >&5 + echo "$as_me:34237: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -33744,7 +34251,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:33747: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:34254: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -33790,7 +34297,7 @@ if test -n "$cf_searchpath/../include" ; CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 33793 "configure" +#line 34300 "configure" #include "confdefs.h" #include int @@ -33802,16 +34309,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:33805: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:34312: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:33808: \$? = $ac_status" >&5 + echo "$as_me:34315: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:33811: \"$ac_try\"") >&5 + { (eval echo "$as_me:34318: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33814: \$? = $ac_status" >&5 + echo "$as_me:34321: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -33828,7 +34335,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:33831: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:34338: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -33846,7 +34353,7 @@ echo "${as_me:-configure}:33831: testing fi else -{ { echo "$as_me:33849: error: cannot find libintl under $withval" >&5 +{ { echo "$as_me:34356: error: cannot find libintl under $withval" >&5 echo "$as_me: error: cannot find libintl under $withval" >&2;} { (exit 1); exit 1; }; } fi @@ -33871,7 +34378,7 @@ if test -n "$cf_searchpath/lib" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:33874: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:34381: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -33900,7 +34407,7 @@ if test -n "$cf_searchpath" ; then if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:33903: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:34410: testing adding $cf_add_libdir to library-path ..." 1>&5 LDFLAGS="-L$cf_add_libdir $LDFLAGS" fi @@ -33909,7 +34416,7 @@ echo "${as_me:-configure}:33903: testing fi else -{ { echo "$as_me:33912: error: cannot find libintl under $withval" >&5 +{ { echo "$as_me:34419: error: cannot find libintl under $withval" >&5 echo "$as_me: error: cannot find libintl under $withval" >&2;} { (exit 1); exit 1; }; } fi @@ -33917,7 +34424,7 @@ done test -n "$verbose" && echo " setting path value for libintl to $withval" 1>&6 -echo "${as_me:-configure}:33920: testing setting path value for libintl to $withval ..." 1>&5 +echo "${as_me:-configure}:34427: testing setting path value for libintl to $withval ..." 1>&5 ;; esac @@ -33929,12 +34436,12 @@ fi; cf_cv_header_path_intl= cf_cv_library_path_intl= -echo "${as_me:-configure}:33932: testing Starting FIND_LINKAGE(intl,) ..." 1>&5 +echo "${as_me:-configure}:34439: testing Starting FIND_LINKAGE(intl,) ..." 1>&5 cf_save_LIBS="$LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 33937 "configure" +#line 34444 "configure" #include "confdefs.h" #include @@ -33956,16 +34463,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:33959: \"$ac_link\"") >&5 +if { (eval echo "$as_me:34466: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:33962: \$? = $ac_status" >&5 + echo "$as_me:34469: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:33965: \"$ac_try\"") >&5 + { (eval echo "$as_me:34472: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:33968: \$? = $ac_status" >&5 + echo "$as_me:34475: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_intl=yes @@ -33979,7 +34486,7 @@ cat "conftest.$ac_ext" >&5 LIBS="-lintl $cf_save_LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 33982 "configure" +#line 34489 "configure" #include "confdefs.h" #include @@ -34001,16 +34508,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34004: \"$ac_link\"") >&5 +if { (eval echo "$as_me:34511: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34007: \$? = $ac_status" >&5 + echo "$as_me:34514: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34010: \"$ac_try\"") >&5 + { (eval echo "$as_me:34517: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34013: \$? = $ac_status" >&5 + echo "$as_me:34520: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_find_linkage_intl=yes @@ -34027,9 +34534,9 @@ cat "conftest.$ac_ext" >&5 test -n "$verbose" && echo " find linkage for intl library" 1>&6 -echo "${as_me:-configure}:34030: testing find linkage for intl library ..." 1>&5 +echo "${as_me:-configure}:34537: testing find linkage for intl library ..." 1>&5 -echo "${as_me:-configure}:34032: testing Searching for headers in FIND_LINKAGE(intl,) ..." 1>&5 +echo "${as_me:-configure}:34539: testing Searching for headers in FIND_LINKAGE(intl,) ..." 1>&5 cf_save_CPPFLAGS="$CPPFLAGS" cf_test_CPPFLAGS="$CPPFLAGS" @@ -34120,7 +34627,7 @@ cf_search="$cf_search $cf_header_path_li if test -d "$cf_cv_header_path_intl" ; then test -n "$verbose" && echo " ... testing $cf_cv_header_path_intl" 1>&6 -echo "${as_me:-configure}:34123: testing ... testing $cf_cv_header_path_intl ..." 1>&5 +echo "${as_me:-configure}:34630: testing ... testing $cf_cv_header_path_intl ..." 1>&5 CPPFLAGS="$cf_save_CPPFLAGS" @@ -34128,7 +34635,7 @@ echo "${as_me:-configure}:34123: testing CPPFLAGS="${CPPFLAGS}-I$cf_cv_header_path_intl" cat >"conftest.$ac_ext" <<_ACEOF -#line 34131 "configure" +#line 34638 "configure" #include "confdefs.h" #include @@ -34150,21 +34657,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:34153: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:34660: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:34156: \$? = $ac_status" >&5 + echo "$as_me:34663: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:34159: \"$ac_try\"") >&5 + { (eval echo "$as_me:34666: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34162: \$? = $ac_status" >&5 + echo "$as_me:34669: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found intl headers in $cf_cv_header_path_intl" 1>&6 -echo "${as_me:-configure}:34167: testing ... found intl headers in $cf_cv_header_path_intl ..." 1>&5 +echo "${as_me:-configure}:34674: testing ... found intl headers in $cf_cv_header_path_intl ..." 1>&5 cf_cv_find_linkage_intl=maybe cf_test_CPPFLAGS="$CPPFLAGS" @@ -34182,7 +34689,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_cv_find_linkage_intl" = maybe ; then -echo "${as_me:-configure}:34185: testing Searching for intl library in FIND_LINKAGE(intl,) ..." 1>&5 +echo "${as_me:-configure}:34692: testing Searching for intl library in FIND_LINKAGE(intl,) ..." 1>&5 cf_save_LIBS="$LIBS" cf_save_LDFLAGS="$LDFLAGS" @@ -34257,13 +34764,13 @@ cf_search="$cf_library_path_list $cf_sea if test -d "$cf_cv_library_path_intl" ; then test -n "$verbose" && echo " ... testing $cf_cv_library_path_intl" 1>&6 -echo "${as_me:-configure}:34260: testing ... testing $cf_cv_library_path_intl ..." 1>&5 +echo "${as_me:-configure}:34767: testing ... testing $cf_cv_library_path_intl ..." 1>&5 CPPFLAGS="$cf_test_CPPFLAGS" LIBS="-lintl $cf_save_LIBS" LDFLAGS="$cf_save_LDFLAGS -L$cf_cv_library_path_intl" cat >"conftest.$ac_ext" <<_ACEOF -#line 34266 "configure" +#line 34773 "configure" #include "confdefs.h" #include @@ -34285,21 +34792,21 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34288: \"$ac_link\"") >&5 +if { (eval echo "$as_me:34795: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34291: \$? = $ac_status" >&5 + echo "$as_me:34798: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34294: \"$ac_try\"") >&5 + { (eval echo "$as_me:34801: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34297: \$? = $ac_status" >&5 + echo "$as_me:34804: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then test -n "$verbose" && echo " ... found intl library in $cf_cv_library_path_intl" 1>&6 -echo "${as_me:-configure}:34302: testing ... found intl library in $cf_cv_library_path_intl ..." 1>&5 +echo "${as_me:-configure}:34809: testing ... found intl library in $cf_cv_library_path_intl ..." 1>&5 cf_cv_find_linkage_intl=yes cf_cv_library_file_intl="-lintl" @@ -34338,9 +34845,9 @@ else cf_cv_func_gettext=no fi - echo "$as_me:34341: checking for libintl.h and gettext()" >&5 + echo "$as_me:34848: checking for libintl.h and gettext()" >&5 echo $ECHO_N "checking for libintl.h and gettext()... $ECHO_C" >&6 - echo "$as_me:34343: result: $cf_cv_func_gettext" >&5 + echo "$as_me:34850: result: $cf_cv_func_gettext" >&5 echo "${ECHO_T}$cf_cv_func_gettext" >&6 if test "$cf_cv_func_gettext" = yes ; then @@ -34380,7 +34887,7 @@ if test -n "$cf_cv_header_path_intl" ; t CPPFLAGS="${CPPFLAGS}-I$cf_add_incdir" cat >"conftest.$ac_ext" <<_ACEOF -#line 34383 "configure" +#line 34890 "configure" #include "confdefs.h" #include int @@ -34392,16 +34899,16 @@ printf("Hello") } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:34395: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:34902: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:34398: \$? = $ac_status" >&5 + echo "$as_me:34905: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:34401: \"$ac_try\"") >&5 + { (eval echo "$as_me:34908: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34404: \$? = $ac_status" >&5 + echo "$as_me:34911: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -34418,7 +34925,7 @@ rm -f "conftest.$ac_objext" "conftest.$a if test "$cf_have_incdir" = no ; then test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6 -echo "${as_me:-configure}:34421: testing adding $cf_add_incdir to include-path ..." 1>&5 +echo "${as_me:-configure}:34928: testing adding $cf_add_incdir to include-path ..." 1>&5 CPPFLAGS="$CPPFLAGS -I$cf_add_incdir" @@ -34457,7 +34964,7 @@ if test -n "$cf_cv_library_path_intl" ; if test "$cf_have_libdir" = no ; then test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6 -echo "${as_me:-configure}:34460: testing adding $cf_add_libdir to library-path ..." 1>&5 +echo "${as_me:-configure}:34967: testing adding $cf_add_libdir to library-path ..." 1>&5 INTLLIBS="-L$cf_add_libdir $INTLLIBS" fi @@ -34467,10 +34974,10 @@ fi fi - echo "$as_me:34470: checking if this is GNU gettext" >&5 + echo "$as_me:34977: checking if this is GNU gettext" >&5 echo $ECHO_N "checking if this is GNU gettext... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 34473 "configure" +#line 34980 "configure" #include "confdefs.h" #define USE_MSGFMT_HACK @@ -34493,16 +35000,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34496: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35003: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34499: \$? = $ac_status" >&5 + echo "$as_me:35006: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34502: \"$ac_try\"") >&5 + { (eval echo "$as_me:35009: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34505: \$? = $ac_status" >&5 + echo "$as_me:35012: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_gnu_gettext=yes else @@ -34511,7 +35018,7 @@ cat "conftest.$ac_ext" >&5 cf_cv_gnu_gettext=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:34514: result: $cf_cv_gnu_gettext" >&5 + echo "$as_me:35021: result: $cf_cv_gnu_gettext" >&5 echo "${ECHO_T}$cf_cv_gnu_gettext" >&6 test "$" = yes && cat >>confdefs.h <<\EOF @@ -34523,13 +35030,13 @@ EOF for ac_func in dcgettext do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:34526: checking for $ac_func" >&5 +echo "$as_me:35033: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34532 "configure" +#line 35039 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -34560,16 +35067,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34563: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35070: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34566: \$? = $ac_status" >&5 + echo "$as_me:35073: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34569: \"$ac_try\"") >&5 + { (eval echo "$as_me:35076: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34572: \$? = $ac_status" >&5 + echo "$as_me:35079: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -34579,7 +35086,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:34582: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:35089: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then cat >>confdefs.h <>confdefs.h <<\EOF EOF elif test -z "$MSGFMT" || test -z "$XGETTEXT" ; then - { echo "$as_me:34599: WARNING: disabling NLS feature" >&5 + { echo "$as_me:35106: WARNING: disabling NLS feature" >&5 echo "$as_me: WARNING: disabling NLS feature" >&2;} ALL_LINGUAS= CATOBJEXT=.ignored @@ -34612,7 +35119,7 @@ echo "$as_me: WARNING: disabling NLS fea if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then : ; else - { echo "$as_me:34615: WARNING: found msgfmt program is not GNU msgfmt" >&5 + { echo "$as_me:35122: WARNING: found msgfmt program is not GNU msgfmt" >&5 echo "$as_me: WARNING: found msgfmt program is not GNU msgfmt" >&2;} fi fi @@ -34621,7 +35128,7 @@ echo "$as_me: WARNING: found msgfmt prog if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then : ; else - { echo "$as_me:34624: WARNING: found xgettext program is not GNU xgettext" >&5 + { echo "$as_me:35131: WARNING: found xgettext program is not GNU xgettext" >&5 echo "$as_me: WARNING: found xgettext program is not GNU xgettext" >&2;} fi fi @@ -34649,7 +35156,7 @@ echo "$as_me: WARNING: found xgettext pr if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else - echo "$as_me:34652: checking for catalogs to be installed" >&5 + echo "$as_me:35159: checking for catalogs to be installed" >&5 echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6 NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do @@ -34669,7 +35176,7 @@ echo $ECHO_N "checking for catalogs to b fi done LINGUAS=$NEW_LINGUAS - echo "$as_me:34672: result: $LINGUAS" >&5 + echo "$as_me:35179: result: $LINGUAS" >&5 echo "${ECHO_T}$LINGUAS" >&6 fi @@ -34704,7 +35211,7 @@ cf_makefile=Makefile use_our_messages=no if test "$USE_NLS" = yes ; then if test -d "$srcdir/po" ; then -echo "$as_me:34707: checking if we should use included message-library" >&5 +echo "$as_me:35214: checking if we should use included message-library" >&5 echo $ECHO_N "checking if we should use included message-library... $ECHO_C" >&6 # Check whether --enable-included-msgs or --disable-included-msgs was given. @@ -34715,7 +35222,7 @@ else use_our_messages=yes fi; fi -echo "$as_me:34718: result: $use_our_messages" >&5 +echo "$as_me:35225: result: $use_our_messages" >&5 echo "${ECHO_T}$use_our_messages" >&6 fi @@ -34731,23 +35238,23 @@ if test "$USE_NLS" = yes ; then for ac_header in libintl.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:34734: checking for $ac_header" >&5 +echo "$as_me:35241: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34740 "configure" +#line 35247 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:34744: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:35251: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:34750: \$? = $ac_status" >&5 + echo "$as_me:35257: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -34766,7 +35273,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:34769: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:35276: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:35301: checking for working alloca.h" >&5 echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6 if test "${ac_cv_working_alloca_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34800 "configure" +#line 35307 "configure" #include "confdefs.h" #include int @@ -34809,16 +35316,16 @@ char *p = (char *) alloca (2 * sizeof (i } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34812: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35319: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34815: \$? = $ac_status" >&5 + echo "$as_me:35322: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34818: \"$ac_try\"") >&5 + { (eval echo "$as_me:35325: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34821: \$? = $ac_status" >&5 + echo "$as_me:35328: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_working_alloca_h=yes else @@ -34828,7 +35335,7 @@ ac_cv_working_alloca_h=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:34831: result: $ac_cv_working_alloca_h" >&5 +echo "$as_me:35338: result: $ac_cv_working_alloca_h" >&5 echo "${ECHO_T}$ac_cv_working_alloca_h" >&6 if test $ac_cv_working_alloca_h = yes; then @@ -34838,13 +35345,13 @@ EOF fi -echo "$as_me:34841: checking for alloca" >&5 +echo "$as_me:35348: checking for alloca" >&5 echo $ECHO_N "checking for alloca... $ECHO_C" >&6 if test "${ac_cv_func_alloca_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34847 "configure" +#line 35354 "configure" #include "confdefs.h" #ifdef __GNUC__ # define alloca __builtin_alloca @@ -34876,16 +35383,16 @@ char *p = (char *) alloca (1); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34879: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35386: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34882: \$? = $ac_status" >&5 + echo "$as_me:35389: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34885: \"$ac_try\"") >&5 + { (eval echo "$as_me:35392: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34888: \$? = $ac_status" >&5 + echo "$as_me:35395: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_alloca_works=yes else @@ -34895,7 +35402,7 @@ ac_cv_func_alloca_works=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:34898: result: $ac_cv_func_alloca_works" >&5 +echo "$as_me:35405: result: $ac_cv_func_alloca_works" >&5 echo "${ECHO_T}$ac_cv_func_alloca_works" >&6 if test $ac_cv_func_alloca_works = yes; then @@ -34916,13 +35423,13 @@ cat >>confdefs.h <<\EOF #define C_ALLOCA 1 EOF -echo "$as_me:34919: checking whether \`alloca.c' needs Cray hooks" >&5 +echo "$as_me:35426: checking whether \`alloca.c' needs Cray hooks" >&5 echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6 if test "${ac_cv_os_cray+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34925 "configure" +#line 35432 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -34940,18 +35447,18 @@ fi rm -rf conftest* fi -echo "$as_me:34943: result: $ac_cv_os_cray" >&5 +echo "$as_me:35450: result: $ac_cv_os_cray" >&5 echo "${ECHO_T}$ac_cv_os_cray" >&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:34948: checking for $ac_func" >&5 +echo "$as_me:35455: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 34954 "configure" +#line 35461 "configure" #include "confdefs.h" #define $ac_func autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -34982,16 +35489,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:34985: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35492: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:34988: \$? = $ac_status" >&5 + echo "$as_me:35495: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:34991: \"$ac_try\"") >&5 + { (eval echo "$as_me:35498: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:34994: \$? = $ac_status" >&5 + echo "$as_me:35501: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then eval "$as_ac_var=yes" else @@ -35001,7 +35508,7 @@ eval "$as_ac_var=no" fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:35004: result: `eval echo '${'"$as_ac_var"'}'`" >&5 +echo "$as_me:35511: result: `eval echo '${'"$as_ac_var"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_var"'}'`" >&6 if test "`eval echo '${'"$as_ac_var"'}'`" = yes; then @@ -35015,7 +35522,7 @@ fi done fi -echo "$as_me:35018: checking stack direction for C alloca" >&5 +echo "$as_me:35525: checking stack direction for C alloca" >&5 echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6 if test "${ac_cv_c_stack_direction+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -35024,7 +35531,7 @@ else ac_cv_c_stack_direction=0 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35027 "configure" +#line 35534 "configure" #include "confdefs.h" int find_stack_direction (void) @@ -35047,15 +35554,15 @@ main (void) } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:35050: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35557: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:35053: \$? = $ac_status" >&5 + echo "$as_me:35560: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:35055: \"$ac_try\"") >&5 + { (eval echo "$as_me:35562: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35058: \$? = $ac_status" >&5 + echo "$as_me:35565: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_c_stack_direction=1 else @@ -35067,7 +35574,7 @@ fi rm -f core ./core.* ./*.core "conftest$ac_exeext" "conftest.$ac_objext" "conftest.$ac_ext" fi fi -echo "$as_me:35070: result: $ac_cv_c_stack_direction" >&5 +echo "$as_me:35577: result: $ac_cv_c_stack_direction" >&5 echo "${ECHO_T}$ac_cv_c_stack_direction" >&6 cat >>confdefs.h <&5 +echo "$as_me:35606: checking for h_addr_list in struct hostent" >&5 echo $ECHO_N "checking for h_addr_list in struct hostent... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35102 "configure" +#line 35609 "configure" #include "confdefs.h" $ac_includes_default @@ -35119,16 +35626,16 @@ h.h_addr_list[0] = malloc(1); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35122: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:35629: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35125: \$? = $ac_status" >&5 + echo "$as_me:35632: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35128: \"$ac_try\"") >&5 + { (eval echo "$as_me:35635: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35131: \$? = $ac_status" >&5 + echo "$as_me:35638: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_hostent_h_addr_list=yes else @@ -35137,7 +35644,7 @@ cat "conftest.$ac_ext" >&5 ac_cv_hostent_h_addr_list=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:35140: result: $ac_cv_hostent_h_addr_list" >&5 +echo "$as_me:35647: result: $ac_cv_hostent_h_addr_list" >&5 echo "${ECHO_T}$ac_cv_hostent_h_addr_list" >&6 if test $ac_cv_hostent_h_addr_list = yes; then @@ -35150,23 +35657,23 @@ fi for ac_header in X11/Xpoll.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:35153: checking for $ac_header" >&5 +echo "$as_me:35660: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35159 "configure" +#line 35666 "configure" #include "confdefs.h" #include <$ac_header> _ACEOF -if { (eval echo "$as_me:35163: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:35670: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:35169: \$? = $ac_status" >&5 + echo "$as_me:35676: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -35185,7 +35692,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:35188: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 +echo "$as_me:35695: result: `eval echo '${'"$as_ac_Header"'}'`" >&5 echo "${ECHO_T}`eval echo '${'"$as_ac_Header"'}'`" >&6 if test "`eval echo '${'"$as_ac_Header"'}'`" = yes; then cat >>confdefs.h <&5 +echo "$as_me:35705: checking for declaration of fd_set" >&5 echo $ECHO_N "checking for declaration of fd_set... $ECHO_C" >&6 if test "${cf_cv_type_fd_set+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else -echo "${as_me:-configure}:35204: testing sys/types alone ..." 1>&5 +echo "${as_me:-configure}:35711: testing sys/types alone ..." 1>&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 35207 "configure" +#line 35714 "configure" #include "confdefs.h" #include @@ -35217,26 +35724,26 @@ fd_set x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35220: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:35727: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35223: \$? = $ac_status" >&5 + echo "$as_me:35730: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35226: \"$ac_try\"") >&5 + { (eval echo "$as_me:35733: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35229: \$? = $ac_status" >&5 + echo "$as_me:35736: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_fd_set=sys/types.h else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "${as_me:-configure}:35236: testing X11/Xpoll.h ..." 1>&5 +echo "${as_me:-configure}:35743: testing X11/Xpoll.h ..." 1>&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 35239 "configure" +#line 35746 "configure" #include "confdefs.h" #ifdef HAVE_X11_XPOLL_H @@ -35251,26 +35758,26 @@ fd_set x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35254: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:35761: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35257: \$? = $ac_status" >&5 + echo "$as_me:35764: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35260: \"$ac_try\"") >&5 + { (eval echo "$as_me:35767: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35263: \$? = $ac_status" >&5 + echo "$as_me:35770: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_fd_set=X11/Xpoll.h else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 -echo "${as_me:-configure}:35270: testing sys/select.h ..." 1>&5 +echo "${as_me:-configure}:35777: testing sys/select.h ..." 1>&5 cat >"conftest.$ac_ext" <<_ACEOF -#line 35273 "configure" +#line 35780 "configure" #include "confdefs.h" #include @@ -35284,16 +35791,16 @@ fd_set x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35287: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:35794: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35290: \$? = $ac_status" >&5 + echo "$as_me:35797: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35293: \"$ac_try\"") >&5 + { (eval echo "$as_me:35800: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35296: \$? = $ac_status" >&5 + echo "$as_me:35803: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_type_fd_set=sys/select.h else @@ -35307,7 +35814,7 @@ rm -f "conftest.$ac_objext" "conftest.$a fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:35310: result: $cf_cv_type_fd_set" >&5 +echo "$as_me:35817: result: $cf_cv_type_fd_set" >&5 echo "${ECHO_T}$cf_cv_type_fd_set" >&6 if test $cf_cv_type_fd_set = sys/select.h ; then @@ -35317,14 +35824,14 @@ EOF fi -echo "$as_me:35320: checking for fd_set macros" >&5 +echo "$as_me:35827: checking for fd_set macros" >&5 echo $ECHO_N "checking for fd_set macros... $ECHO_C" >&6 if test "${cf_cv_macros_fd_set+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35327 "configure" +#line 35834 "configure" #include "confdefs.h" $ac_includes_default @@ -35353,16 +35860,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35356: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:35863: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35359: \$? = $ac_status" >&5 + echo "$as_me:35866: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35362: \"$ac_try\"") >&5 + { (eval echo "$as_me:35869: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35365: \$? = $ac_status" >&5 + echo "$as_me:35872: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_macros_fd_set=yes else @@ -35372,7 +35879,7 @@ cf_cv_macros_fd_set=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:35375: result: $cf_cv_macros_fd_set" >&5 +echo "$as_me:35882: result: $cf_cv_macros_fd_set" >&5 echo "${ECHO_T}$cf_cv_macros_fd_set" >&6 test $cf_cv_macros_fd_set = yes && cat >>confdefs.h <<\EOF @@ -35384,16 +35891,16 @@ EOF # if test "$ac_cv_func_snprintf" == "yes" ; then # fi #? -echo "$as_me:35387: checking for working snprintf()" >&5 +echo "$as_me:35894: checking for working snprintf()" >&5 echo $ECHO_N "checking for working snprintf()... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - echo "$as_me:35391: result: unknown" >&5 + echo "$as_me:35898: result: unknown" >&5 echo "${ECHO_T}unknown" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35396 "configure" +#line 35903 "configure" #include "confdefs.h" #include @@ -35413,18 +35920,18 @@ int main(void) { } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:35416: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35923: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:35419: \$? = $ac_status" >&5 + echo "$as_me:35926: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:35421: \"$ac_try\"") >&5 + { (eval echo "$as_me:35928: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35424: \$? = $ac_status" >&5 + echo "$as_me:35931: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:35427: result: yes" >&5 + echo "$as_me:35934: result: yes" >&5 echo "${ECHO_T}yes" >&6 else @@ -35436,7 +35943,7 @@ cat >>confdefs.h <<\EOF #define SNPRINTF_BROKEN 1 EOF - echo "$as_me:35439: result: no" >&5 + echo "$as_me:35946: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -35446,16 +35953,16 @@ fi # tolower() is known to be broken on 4.2BSD by # not checking if input is an uppercase letter # /* #define tolower(c) ((c)-'A'+'a') */ -echo "$as_me:35449: checking for working tolower()" >&5 +echo "$as_me:35956: checking for working tolower()" >&5 echo $ECHO_N "checking for working tolower()... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - echo "$as_me:35453: result: unknown" >&5 + echo "$as_me:35960: result: unknown" >&5 echo "${ECHO_T}unknown" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35458 "configure" +#line 35965 "configure" #include "confdefs.h" #include @@ -35470,18 +35977,18 @@ int main(void) { } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:35473: \"$ac_link\"") >&5 +if { (eval echo "$as_me:35980: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:35476: \$? = $ac_status" >&5 + echo "$as_me:35983: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:35478: \"$ac_try\"") >&5 + { (eval echo "$as_me:35985: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35481: \$? = $ac_status" >&5 + echo "$as_me:35988: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:35484: result: yes" >&5 + echo "$as_me:35991: result: yes" >&5 echo "${ECHO_T}yes" >&6 else @@ -35493,7 +36000,7 @@ cat >>confdefs.h <<\EOF #define TOLOWER_BROKEN 1 EOF - echo "$as_me:35496: result: no" >&5 + echo "$as_me:36003: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -35503,16 +36010,16 @@ fi # toupper is known to be broken on 4.2BSD by # not checking if input is a lowercase letter # /* #define toupper(c) ((c)-'a'+'A') */ -echo "$as_me:35506: checking for working toupper()" >&5 +echo "$as_me:36013: checking for working toupper()" >&5 echo $ECHO_N "checking for working toupper()... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - echo "$as_me:35510: result: unknown" >&5 + echo "$as_me:36017: result: unknown" >&5 echo "${ECHO_T}unknown" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35515 "configure" +#line 36022 "configure" #include "confdefs.h" #include @@ -35527,18 +36034,18 @@ int main(void) { } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:35530: \"$ac_link\"") >&5 +if { (eval echo "$as_me:36037: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:35533: \$? = $ac_status" >&5 + echo "$as_me:36040: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:35535: \"$ac_try\"") >&5 + { (eval echo "$as_me:36042: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35538: \$? = $ac_status" >&5 + echo "$as_me:36045: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then - echo "$as_me:35541: result: yes" >&5 + echo "$as_me:36048: result: yes" >&5 echo "${ECHO_T}yes" >&6 else @@ -35550,30 +36057,30 @@ cat >>confdefs.h <<\EOF #define TOUPPER_BROKEN 1 EOF - echo "$as_me:35553: result: no" >&5 + echo "$as_me:36060: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f core ./core.* ./*.core "conftest$ac_exeext" "conftest.$ac_objext" "conftest.$ac_ext" fi -echo "$as_me:35560: checking for stdnoreturn.h" >&5 +echo "$as_me:36067: checking for stdnoreturn.h" >&5 echo $ECHO_N "checking for stdnoreturn.h... $ECHO_C" >&6 if test "${ac_cv_header_stdnoreturn_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35566 "configure" +#line 36073 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:35570: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:36077: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:35576: \$? = $ac_status" >&5 + echo "$as_me:36083: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -35592,14 +36099,14 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:35595: result: $ac_cv_header_stdnoreturn_h" >&5 +echo "$as_me:36102: result: $ac_cv_header_stdnoreturn_h" >&5 echo "${ECHO_T}$ac_cv_header_stdnoreturn_h" >&6 if test "$ac_cv_header_stdnoreturn_h" = yes; then - echo "$as_me:35599: checking for C11 _Noreturn feature" >&5 + echo "$as_me:36106: checking for C11 _Noreturn feature" >&5 echo $ECHO_N "checking for C11 _Noreturn feature... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35602 "configure" +#line 36109 "configure" #include "confdefs.h" $ac_includes_default @@ -35619,25 +36126,25 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35622: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:36129: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35625: \$? = $ac_status" >&5 + echo "$as_me:36132: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35628: \"$ac_try\"") >&5 + { (eval echo "$as_me:36135: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35631: \$? = $ac_status" >&5 + echo "$as_me:36138: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_c11_noreturn=yes - echo "$as_me:35634: result: $cf_cv_c11_noreturn" >&5 + echo "$as_me:36141: result: $cf_cv_c11_noreturn" >&5 echo "${ECHO_T}$cf_cv_c11_noreturn" >&6 else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 cf_cv_c11_noreturn=no - echo "$as_me:35640: result: $cf_cv_c11_noreturn" >&5 + echo "$as_me:36147: result: $cf_cv_c11_noreturn" >&5 echo "${ECHO_T}$cf_cv_c11_noreturn" >&6 fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" @@ -35663,23 +36170,23 @@ fi for cf_hdr in signal.h do - echo "$as_me:35666: checking for $cf_hdr" >&5 + echo "$as_me:36173: checking for $cf_hdr" >&5 echo $ECHO_N "checking for $cf_hdr... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35669 "configure" +#line 36176 "configure" #include "confdefs.h" #include #include <$cf_hdr> _ACEOF -if { (eval echo "$as_me:35676: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:36183: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:35682: \$? = $ac_status" >&5 + echo "$as_me:36189: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -35697,7 +36204,7 @@ else cf_found=no fi rm -f conftest.err "conftest.$ac_ext" -echo "$as_me:35700: result: $cf_found" >&5 +echo "$as_me:36207: result: $cf_found" >&5 echo "${ECHO_T}$cf_found" >&6 if test $cf_found = yes ; then @@ -35710,10 +36217,10 @@ EOF fi done -echo "$as_me:35713: checking for POSIX signal support" >&5 +echo "$as_me:36220: checking for POSIX signal support" >&5 echo $ECHO_N "checking for POSIX signal support... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35716 "configure" +#line 36223 "configure" #include "confdefs.h" #ifdef HAVE_STDDEF_H @@ -35737,16 +36244,16 @@ sigfillset(&set); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35740: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:36247: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35743: \$? = $ac_status" >&5 + echo "$as_me:36250: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35746: \"$ac_try\"") >&5 + { (eval echo "$as_me:36253: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35749: \$? = $ac_status" >&5 + echo "$as_me:36256: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then have_posix_signal=yes @@ -35762,15 +36269,15 @@ have_posix_signal=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:35765: result: $have_posix_signal" >&5 +echo "$as_me:36272: result: $have_posix_signal" >&5 echo "${ECHO_T}$have_posix_signal" >&6 if test x"$have_posix_signal" != "xyes"; then -echo "$as_me:35770: checking for BSD signal support" >&5 +echo "$as_me:36277: checking for BSD signal support" >&5 echo $ECHO_N "checking for BSD signal support... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35773 "configure" +#line 36280 "configure" #include "confdefs.h" #ifdef HAVE_SIGNAL_H @@ -35788,16 +36295,16 @@ sigblock(0); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35791: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:36298: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35794: \$? = $ac_status" >&5 + echo "$as_me:36301: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35797: \"$ac_try\"") >&5 + { (eval echo "$as_me:36304: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35800: \$? = $ac_status" >&5 + echo "$as_me:36307: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then have_bsd_signal=yes @@ -35813,17 +36320,17 @@ have_bsd_signal=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:35816: result: $have_bsd_signal" >&5 +echo "$as_me:36323: result: $have_bsd_signal" >&5 echo "${ECHO_T}$have_bsd_signal" >&6 fi if test x"$have_posix_signal" != "xyes" && test x"$have_bsd_signal" != "xyes"; then -echo "$as_me:35823: checking for SYSV signal support" >&5 +echo "$as_me:36330: checking for SYSV signal support" >&5 echo $ECHO_N "checking for SYSV signal support... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35826 "configure" +#line 36333 "configure" #include "confdefs.h" #ifdef HAVE_SIGNAL_H @@ -35841,16 +36348,16 @@ sigignore(0); } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:35844: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:36351: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:35847: \$? = $ac_status" >&5 + echo "$as_me:36354: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:35850: \"$ac_try\"") >&5 + { (eval echo "$as_me:36357: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35853: \$? = $ac_status" >&5 + echo "$as_me:36360: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then have_sysv_signal=yes @@ -35866,7 +36373,7 @@ have_sysv_signal=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" -echo "$as_me:35869: result: $have_sysv_signal" >&5 +echo "$as_me:36376: result: $have_sysv_signal" >&5 echo "${ECHO_T}$have_sysv_signal" >&6 fi @@ -35876,29 +36383,29 @@ if test x"$have_posix_signal" = "xno" && #define HAVE_NO_SIGNAL_BLOCKING 1 EOF -{ echo "$as_me:35879: WARNING: not having blockable signals" >&5 +{ echo "$as_me:36386: WARNING: not having blockable signals" >&5 echo "$as_me: WARNING: not having blockable signals" >&2;} fi for cf_hdr in iconv.h do - echo "$as_me:35885: checking for $cf_hdr" >&5 + echo "$as_me:36392: checking for $cf_hdr" >&5 echo $ECHO_N "checking for $cf_hdr... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 35888 "configure" +#line 36395 "configure" #include "confdefs.h" #include #include <$cf_hdr> _ACEOF -if { (eval echo "$as_me:35895: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:36402: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:35901: \$? = $ac_status" >&5 + echo "$as_me:36408: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -35916,7 +36423,7 @@ else cf_found=no fi rm -f conftest.err "conftest.$ac_ext" -echo "$as_me:35919: result: $cf_found" >&5 +echo "$as_me:36426: result: $cf_found" >&5 echo "${ECHO_T}$cf_found" >&6 if test $cf_found = yes ; then @@ -35929,16 +36436,16 @@ EOF fi done -echo "$as_me:35932: checking for iconv_open() //TRANSLIT extension" >&5 +echo "$as_me:36439: checking for iconv_open() //TRANSLIT extension" >&5 echo $ECHO_N "checking for iconv_open() //TRANSLIT extension... $ECHO_C" >&6 if test "$cross_compiling" = yes; then - echo "$as_me:35936: result: unknown" >&5 + echo "$as_me:36443: result: unknown" >&5 echo "${ECHO_T}unknown" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 35941 "configure" +#line 36448 "configure" #include "confdefs.h" #ifdef HAVE_ICONV_H @@ -35952,26 +36459,27 @@ int main(void) { if ((cd = iconv_open("US-ASCII//TRANSLIT", "ISO-8859-1")) == (iconv_t) (-1)) exit(1); + iconv_close(cd); exit(0); } _ACEOF rm -f "conftest$ac_exeext" -if { (eval echo "$as_me:35959: \"$ac_link\"") >&5 +if { (eval echo "$as_me:36467: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:35962: \$? = $ac_status" >&5 + echo "$as_me:36470: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='"./conftest$ac_exeext"' - { (eval echo "$as_me:35964: \"$ac_try\"") >&5 + { (eval echo "$as_me:36472: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:35967: \$? = $ac_status" >&5 + echo "$as_me:36475: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cat >>confdefs.h <<\EOF #define HAVE_ICONV_OPEN_TRANSLIT 1 EOF - echo "$as_me:35974: result: yes" >&5 + echo "$as_me:36482: result: yes" >&5 echo "${ECHO_T}yes" >&6 else @@ -35979,7 +36487,7 @@ else echo "$as_me: failed program was:" >&5 cat "conftest.$ac_ext" >&5 - echo "$as_me:35982: result: no" >&5 + echo "$as_me:36490: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -35996,23 +36504,23 @@ fi for cf_hdr in tiuser.h sys/tiuser.h do - echo "$as_me:35999: checking for $cf_hdr" >&5 + echo "$as_me:36507: checking for $cf_hdr" >&5 echo $ECHO_N "checking for $cf_hdr... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 36002 "configure" +#line 36510 "configure" #include "confdefs.h" #include #include <$cf_hdr> _ACEOF -if { (eval echo "$as_me:36009: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:36517: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:36015: \$? = $ac_status" >&5 + echo "$as_me:36523: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -36030,7 +36538,7 @@ else cf_found=no fi rm -f conftest.err "conftest.$ac_ext" -echo "$as_me:36033: result: $cf_found" >&5 +echo "$as_me:36541: result: $cf_found" >&5 echo "${ECHO_T}$cf_found" >&6 if test $cf_found = yes ; then @@ -36074,13 +36582,13 @@ EOF ;; *) - echo "$as_me:36077: checking for link" >&5 + echo "$as_me:36585: checking for link" >&5 echo $ECHO_N "checking for link... $ECHO_C" >&6 if test "${ac_cv_func_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 36083 "configure" +#line 36591 "configure" #include "confdefs.h" #define link autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -36111,16 +36619,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:36114: \"$ac_link\"") >&5 +if { (eval echo "$as_me:36622: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:36117: \$? = $ac_status" >&5 + echo "$as_me:36625: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:36120: \"$ac_try\"") >&5 + { (eval echo "$as_me:36628: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:36123: \$? = $ac_status" >&5 + echo "$as_me:36631: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_link=yes else @@ -36130,7 +36638,7 @@ ac_cv_func_link=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:36133: result: $ac_cv_func_link" >&5 +echo "$as_me:36641: result: $ac_cv_func_link" >&5 echo "${ECHO_T}$ac_cv_func_link" >&6 if test "$ac_cv_func_link" = yes; then @@ -36151,13 +36659,13 @@ EOF ;; *) - echo "$as_me:36154: checking for link" >&5 + echo "$as_me:36662: checking for link" >&5 echo $ECHO_N "checking for link... $ECHO_C" >&6 if test "${ac_cv_func_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 36160 "configure" +#line 36668 "configure" #include "confdefs.h" #define link autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -36188,16 +36696,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:36191: \"$ac_link\"") >&5 +if { (eval echo "$as_me:36699: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:36194: \$? = $ac_status" >&5 + echo "$as_me:36702: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:36197: \"$ac_try\"") >&5 + { (eval echo "$as_me:36705: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:36200: \$? = $ac_status" >&5 + echo "$as_me:36708: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_link=yes else @@ -36207,7 +36715,7 @@ ac_cv_func_link=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:36210: result: $ac_cv_func_link" >&5 +echo "$as_me:36718: result: $ac_cv_func_link" >&5 echo "${ECHO_T}$ac_cv_func_link" >&6 if test "$ac_cv_func_link" = yes; then cat >>confdefs.h <<\EOF @@ -36222,7 +36730,7 @@ if test "$cf_cv_termlib" = pdcurses ; th cf_x_athena=${cf_x_athena:-Xaw} -echo "$as_me:36225: checking if you want to link with Xaw 3d library" >&5 +echo "$as_me:36733: checking if you want to link with Xaw 3d library" >&5 echo $ECHO_N "checking if you want to link with Xaw 3d library... $ECHO_C" >&6 withval= @@ -36233,14 +36741,14 @@ if test "${with_Xaw3d+set}" = set; then fi; if test "$withval" = yes ; then cf_x_athena=Xaw3d - echo "$as_me:36236: result: yes" >&5 + echo "$as_me:36744: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:36239: result: no" >&5 + echo "$as_me:36747: result: no" >&5 echo "${ECHO_T}no" >&6 fi -echo "$as_me:36243: checking if you want to link with Xaw 3d xft library" >&5 +echo "$as_me:36751: checking if you want to link with Xaw 3d xft library" >&5 echo $ECHO_N "checking if you want to link with Xaw 3d xft library... $ECHO_C" >&6 withval= @@ -36251,14 +36759,14 @@ if test "${with_Xaw3dxft+set}" = set; th fi; if test "$withval" = yes ; then cf_x_athena=Xaw3dxft - echo "$as_me:36254: result: yes" >&5 + echo "$as_me:36762: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:36257: result: no" >&5 + echo "$as_me:36765: result: no" >&5 echo "${ECHO_T}no" >&6 fi -echo "$as_me:36261: checking if you want to link with neXT Athena library" >&5 +echo "$as_me:36769: checking if you want to link with neXT Athena library" >&5 echo $ECHO_N "checking if you want to link with neXT Athena library... $ECHO_C" >&6 withval= @@ -36269,14 +36777,14 @@ if test "${with_neXtaw+set}" = set; then fi; if test "$withval" = yes ; then cf_x_athena=neXtaw - echo "$as_me:36272: result: yes" >&5 + echo "$as_me:36780: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:36275: result: no" >&5 + echo "$as_me:36783: result: no" >&5 echo "${ECHO_T}no" >&6 fi -echo "$as_me:36279: checking if you want to link with Athena-Plus library" >&5 +echo "$as_me:36787: checking if you want to link with Athena-Plus library" >&5 echo $ECHO_N "checking if you want to link with Athena-Plus library... $ECHO_C" >&6 withval= @@ -36287,10 +36795,10 @@ if test "${with_XawPlus+set}" = set; the fi; if test "$withval" = yes ; then cf_x_athena=XawPlus - echo "$as_me:36290: result: yes" >&5 + echo "$as_me:36798: result: yes" >&5 echo "${ECHO_T}yes" >&6 else - echo "$as_me:36293: result: no" >&5 + echo "$as_me:36801: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -36310,17 +36818,31 @@ if test "$PKG_CONFIG" != none ; then if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "$cf_athena_pkg"; then test -n "$verbose" && echo " found package $cf_athena_pkg" 1>&6 -echo "${as_me:-configure}:36313: testing found package $cf_athena_pkg ..." 1>&5 +echo "${as_me:-configure}:36821: testing found package $cf_athena_pkg ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "$cf_athena_pkg" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "$cf_athena_pkg" 2>/dev/null`" test -n "$verbose" && echo " package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:36319: testing package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:36827: testing package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package $cf_athena_pkg LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:36323: testing package $cf_athena_pkg LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:36831: testing package $cf_athena_pkg LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in $cf_athena_pkg +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -36444,27 +36966,14 @@ cf_x_athena_LIBS=`echo "HAVE_LIB_$cf_x_a #define $cf_x_athena_LIBS 1 EOF - for cf_trim_lib in Xmu Xt X11 - do - case "$LIBS" in - *-l$cf_trim_lib\ *-l$cf_trim_lib*) - LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'` - test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6 - -echo "${as_me:-configure}:36454: testing ..trimmed $LIBS ..." 1>&5 - - ;; - esac - done - -echo "$as_me:36460: checking for usable $cf_x_athena/Xmu package" >&5 +echo "$as_me:36969: checking for usable $cf_x_athena/Xmu package" >&5 echo $ECHO_N "checking for usable $cf_x_athena/Xmu package... $ECHO_C" >&6 if test "${cf_cv_xaw_compat+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 36467 "configure" +#line 36976 "configure" #include "confdefs.h" $ac_includes_default @@ -36482,16 +36991,16 @@ int check = XmuCompareISOLatin1("big", " } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:36485: \"$ac_link\"") >&5 +if { (eval echo "$as_me:36994: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:36488: \$? = $ac_status" >&5 + echo "$as_me:36997: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:36491: \"$ac_try\"") >&5 + { (eval echo "$as_me:37000: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:36494: \$? = $ac_status" >&5 + echo "$as_me:37003: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_xaw_compat=yes else @@ -36501,7 +37010,7 @@ cf_cv_xaw_compat=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:36504: result: $cf_cv_xaw_compat" >&5 +echo "$as_me:37013: result: $cf_cv_xaw_compat" >&5 echo "${ECHO_T}$cf_cv_xaw_compat" >&6 if test "$cf_cv_xaw_compat" = no @@ -36513,7 +37022,7 @@ echo "${ECHO_T}$cf_cv_xaw_compat" >&6 *) test -n "$verbose" && echo " work around broken package" 1>&6 -echo "${as_me:-configure}:36516: testing work around broken package ..." 1>&5 +echo "${as_me:-configure}:37025: testing work around broken package ..." 1>&5 cf_save_xmu="$LIBS" cf_first_lib=`echo "$cf_save_xmu" | sed -e 's/^ *//' -e 's/ .*//'` @@ -36521,17 +37030,31 @@ echo "${as_me:-configure}:36516: testing if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "xmu"; then test -n "$verbose" && echo " found package xmu" 1>&6 -echo "${as_me:-configure}:36524: testing found package xmu ..." 1>&5 +echo "${as_me:-configure}:37033: testing found package xmu ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "xmu" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "xmu" 2>/dev/null`" test -n "$verbose" && echo " package xmu CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:36530: testing package xmu CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37039: testing package xmu CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package xmu LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:36534: testing package xmu LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37043: testing package xmu LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in xmu +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -36649,42 +37172,103 @@ LIBS="$cf_add_libs" LIBS="$cf_save_xmu" -test -n "$verbose" && echo " ...before $LIBS" 1>&6 +cf_add_libs="$LIBS" +test -n "$verbose" && echo " ...before $cf_add_libs" 1>&6 + +echo "${as_me:-configure}:37178: testing ...before $cf_add_libs ..." 1>&5 + +for cf_add_1lib in $cf_pkgconfig_libs; do + # filter duplicates + cf_found_2lib=no + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_found_2lib=yes + break + fi + done + # if not a duplicate, find the dependent library + if test "$cf_found_2lib" = no + then + cf_found_2lib=no + cf_add_2libs= + for cf_add_2lib in $cf_add_libs + do + test -n "$cf_add_2libs" && cf_add_2libs="$cf_add_2libs " + cf_add_2libs="$cf_add_2libs$cf_add_2lib" + if test "x$cf_add_2lib" = "x$cf_first_lib" + then + cf_found_2lib=yes + cf_add_2libs="$cf_add_2libs $cf_add_1lib" + fi + done + if test "$cf_found_2lib" = yes + then + cf_add_libs="$cf_add_2libs" + else + test -n "$verbose" && echo " ...missed $cf_first_lib" 1>&6 + +echo "${as_me:-configure}:37210: testing ...missed $cf_first_lib ..." 1>&5 -echo "${as_me:-configure}:36654: testing ...before $LIBS ..." 1>&5 + fi + fi +done +test -n "$verbose" && echo " ...after $cf_add_libs" 1>&6 -LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib $cf_pkgconfig_libs %" -e 's% % %g'` -test -n "$verbose" && echo " ...after $LIBS" 1>&6 +echo "${as_me:-configure}:37217: testing ...after $cf_add_libs ..." 1>&5 -echo "${as_me:-configure}:36659: testing ...after $LIBS ..." 1>&5 +LIBS="$cf_add_libs" else cf_pkgconfig_incs= cf_pkgconfig_libs= -test -n "$verbose" && echo " ...before $LIBS" 1>&6 +cf_add_libs="$LIBS" +test -n "$verbose" && echo " ...before $cf_add_libs" 1>&6 -echo "${as_me:-configure}:36667: testing ...before $LIBS ..." 1>&5 +echo "${as_me:-configure}:37228: testing ...before $cf_add_libs ..." 1>&5 -LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib -lXmu %" -e 's% % %g'` -test -n "$verbose" && echo " ...after $LIBS" 1>&6 +for cf_add_1lib in -lXmu; do + # filter duplicates + cf_found_2lib=no + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_found_2lib=yes + break + fi + done + # if not a duplicate, find the dependent library + if test "$cf_found_2lib" = no + then + cf_found_2lib=no + cf_add_2libs= + for cf_add_2lib in $cf_add_libs + do + test -n "$cf_add_2libs" && cf_add_2libs="$cf_add_2libs " + cf_add_2libs="$cf_add_2libs$cf_add_2lib" + if test "x$cf_add_2lib" = "x$cf_first_lib" + then + cf_found_2lib=yes + cf_add_2libs="$cf_add_2libs $cf_add_1lib" + fi + done + if test "$cf_found_2lib" = yes + then + cf_add_libs="$cf_add_2libs" + else + test -n "$verbose" && echo " ...missed $cf_first_lib" 1>&6 -echo "${as_me:-configure}:36672: testing ...after $LIBS ..." 1>&5 +echo "${as_me:-configure}:37260: testing ...missed $cf_first_lib ..." 1>&5 -fi + fi + fi +done +test -n "$verbose" && echo " ...after $cf_add_libs" 1>&6 - for cf_trim_lib in Xmu Xt X11 - do - case "$LIBS" in - *-l$cf_trim_lib\ *-l$cf_trim_lib*) - LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'` - test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6 +echo "${as_me:-configure}:37267: testing ...after $cf_add_libs ..." 1>&5 -echo "${as_me:-configure}:36683: testing ..trimmed $LIBS ..." 1>&5 +LIBS="$cf_add_libs" - ;; - esac - done +fi ;; esac @@ -36705,17 +37289,31 @@ if test -z "$cf_x_athena_lib" ; then if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "Xext"; then test -n "$verbose" && echo " found package Xext" 1>&6 -echo "${as_me:-configure}:36708: testing found package Xext ..." 1>&5 +echo "${as_me:-configure}:37292: testing found package Xext ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "Xext" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "Xext" 2>/dev/null`" test -n "$verbose" && echo " package Xext CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:36714: testing package Xext CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37298: testing package Xext CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package Xext LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:36718: testing package Xext LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37302: testing package Xext LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in Xext +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -36836,7 +37434,7 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= - echo "$as_me:36839: checking for XextCreateExtension in -lXext" >&5 + echo "$as_me:37437: checking for XextCreateExtension in -lXext" >&5 echo $ECHO_N "checking for XextCreateExtension in -lXext... $ECHO_C" >&6 if test "${ac_cv_lib_Xext_XextCreateExtension+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -36844,7 +37442,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lXext $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 36847 "configure" +#line 37445 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -36863,16 +37461,16 @@ XextCreateExtension (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:36866: \"$ac_link\"") >&5 +if { (eval echo "$as_me:37464: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:36869: \$? = $ac_status" >&5 + echo "$as_me:37467: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:36872: \"$ac_try\"") >&5 + { (eval echo "$as_me:37470: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:36875: \$? = $ac_status" >&5 + echo "$as_me:37473: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_Xext_XextCreateExtension=yes else @@ -36883,7 +37481,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:36886: result: $ac_cv_lib_Xext_XextCreateExtension" >&5 +echo "$as_me:37484: result: $ac_cv_lib_Xext_XextCreateExtension" >&5 echo "${ECHO_T}$ac_cv_lib_Xext_XextCreateExtension" >&6 if test "$ac_cv_lib_Xext_XextCreateExtension" = yes; then @@ -36919,17 +37517,31 @@ then if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "x11"; then test -n "$verbose" && echo " found package x11" 1>&6 -echo "${as_me:-configure}:36922: testing found package x11 ..." 1>&5 +echo "${as_me:-configure}:37520: testing found package x11 ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "x11" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "x11" 2>/dev/null`" test -n "$verbose" && echo " package x11 CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:36928: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37526: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package x11 LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:36932: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37530: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in x11 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37049,24 +37661,38 @@ LIBS="$cf_add_libs" else cf_pkgconfig_incs= cf_pkgconfig_libs= - { echo "$as_me:37052: WARNING: unable to find X11 library" >&5 + { echo "$as_me:37664: WARNING: unable to find X11 library" >&5 echo "$as_me: WARNING: unable to find X11 library" >&2;} fi if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "ice"; then test -n "$verbose" && echo " found package ice" 1>&6 -echo "${as_me:-configure}:37059: testing found package ice ..." 1>&5 +echo "${as_me:-configure}:37671: testing found package ice ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "ice" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "ice" 2>/dev/null`" test -n "$verbose" && echo " package ice CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37065: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37677: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package ice LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37069: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37681: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in ice +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37186,24 +37812,38 @@ LIBS="$cf_add_libs" else cf_pkgconfig_incs= cf_pkgconfig_libs= - { echo "$as_me:37189: WARNING: unable to find ICE library" >&5 + { echo "$as_me:37815: WARNING: unable to find ICE library" >&5 echo "$as_me: WARNING: unable to find ICE library" >&2;} fi if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "sm"; then test -n "$verbose" && echo " found package sm" 1>&6 -echo "${as_me:-configure}:37196: testing found package sm ..." 1>&5 +echo "${as_me:-configure}:37822: testing found package sm ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "sm" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "sm" 2>/dev/null`" test -n "$verbose" && echo " package sm CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37202: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37828: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package sm LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37206: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37832: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in sm +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37323,24 +37963,38 @@ LIBS="$cf_add_libs" else cf_pkgconfig_incs= cf_pkgconfig_libs= - { echo "$as_me:37326: WARNING: unable to find SM library" >&5 + { echo "$as_me:37966: WARNING: unable to find SM library" >&5 echo "$as_me: WARNING: unable to find SM library" >&2;} fi if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "xt"; then test -n "$verbose" && echo " found package xt" 1>&6 -echo "${as_me:-configure}:37333: testing found package xt ..." 1>&5 +echo "${as_me:-configure}:37973: testing found package xt ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "xt" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "xt" 2>/dev/null`" test -n "$verbose" && echo " package xt CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37339: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:37979: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package xt LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37343: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:37983: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in xt +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37460,7 +38114,7 @@ LIBS="$cf_add_libs" else cf_pkgconfig_incs= cf_pkgconfig_libs= - { echo "$as_me:37463: WARNING: unable to find Xt library" >&5 + { echo "$as_me:38117: WARNING: unable to find Xt library" >&5 echo "$as_me: WARNING: unable to find Xt library" >&2;} fi @@ -37473,17 +38127,31 @@ cf_have_X_LIBS=no if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "xt"; then test -n "$verbose" && echo " found package xt" 1>&6 -echo "${as_me:-configure}:37476: testing found package xt ..." 1>&5 +echo "${as_me:-configure}:38130: testing found package xt ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "xt" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "xt" 2>/dev/null`" test -n "$verbose" && echo " package xt CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37482: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:38136: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package xt LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37486: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:38140: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in xt +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37604,14 +38272,14 @@ LIBS="$cf_add_libs" ;; *) # we have an "xt" package, but it may omit Xt's dependency on X11 -echo "$as_me:37607: checking for usable X dependency" >&5 +echo "$as_me:38275: checking for usable X dependency" >&5 echo $ECHO_N "checking for usable X dependency... $ECHO_C" >&6 if test "${cf_cv_xt_x11_compat+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 37614 "configure" +#line 38282 "configure" #include "confdefs.h" $ac_includes_default @@ -37631,16 +38299,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:37634: \"$ac_link\"") >&5 +if { (eval echo "$as_me:38302: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:37637: \$? = $ac_status" >&5 + echo "$as_me:38305: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:37640: \"$ac_try\"") >&5 + { (eval echo "$as_me:38308: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:37643: \$? = $ac_status" >&5 + echo "$as_me:38311: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_xt_x11_compat=yes else @@ -37650,30 +38318,44 @@ cf_cv_xt_x11_compat=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:37653: result: $cf_cv_xt_x11_compat" >&5 +echo "$as_me:38321: result: $cf_cv_xt_x11_compat" >&5 echo "${ECHO_T}$cf_cv_xt_x11_compat" >&6 if test "$cf_cv_xt_x11_compat" = no then test -n "$verbose" && echo " work around broken X11 dependency" 1>&6 -echo "${as_me:-configure}:37659: testing work around broken X11 dependency ..." 1>&5 +echo "${as_me:-configure}:38327: testing work around broken X11 dependency ..." 1>&5 # 2010/11/19 - good enough until a working Xt on Xcb is delivered. if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "x11"; then test -n "$verbose" && echo " found package x11" 1>&6 -echo "${as_me:-configure}:37666: testing found package x11 ..." 1>&5 +echo "${as_me:-configure}:38334: testing found package x11 ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "x11" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "x11" 2>/dev/null`" test -n "$verbose" && echo " package x11 CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37672: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:38340: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package x11 LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37676: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:38344: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in x11 +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37794,14 +38476,51 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= -test -n "$verbose" && echo " ...before $LIBS" 1>&6 +cf_add_libs="$LIBS" +test -n "$verbose" && echo " ...before $cf_add_libs" 1>&6 -echo "${as_me:-configure}:37799: testing ...before $LIBS ..." 1>&5 +echo "${as_me:-configure}:38482: testing ...before $cf_add_libs ..." 1>&5 + +for cf_add_1lib in -lX11; do + # filter duplicates + cf_found_2lib=no + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_found_2lib=yes + break + fi + done + # if not a duplicate, find the dependent library + if test "$cf_found_2lib" = no + then + cf_found_2lib=no + cf_add_2libs= + for cf_add_2lib in $cf_add_libs + do + test -n "$cf_add_2libs" && cf_add_2libs="$cf_add_2libs " + cf_add_2libs="$cf_add_2libs$cf_add_2lib" + if test "x$cf_add_2lib" = "x-lXt" + then + cf_found_2lib=yes + cf_add_2libs="$cf_add_2libs $cf_add_1lib" + fi + done + if test "$cf_found_2lib" = yes + then + cf_add_libs="$cf_add_2libs" + else + test -n "$verbose" && echo " ...missed -lXt" 1>&6 + +echo "${as_me:-configure}:38514: testing ...missed -lXt ..." 1>&5 + + fi + fi +done +test -n "$verbose" && echo " ...after $cf_add_libs" 1>&6 -LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%-lXt %-lXt -lX11 %" -e 's% % %g'` -test -n "$verbose" && echo " ...after $LIBS" 1>&6 +echo "${as_me:-configure}:38521: testing ...after $cf_add_libs ..." 1>&5 -echo "${as_me:-configure}:37804: testing ...after $LIBS ..." 1>&5 +LIBS="$cf_add_libs" fi @@ -37809,14 +38528,14 @@ fi ;; esac -echo "$as_me:37812: checking for usable X Toolkit package" >&5 +echo "$as_me:38531: checking for usable X Toolkit package" >&5 echo $ECHO_N "checking for usable X Toolkit package... $ECHO_C" >&6 if test "${cf_cv_xt_ice_compat+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 37819 "configure" +#line 38538 "configure" #include "confdefs.h" $ac_includes_default @@ -37832,16 +38551,16 @@ int num = IceConnectionNumber(0); (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:37835: \"$ac_link\"") >&5 +if { (eval echo "$as_me:38554: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:37838: \$? = $ac_status" >&5 + echo "$as_me:38557: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:37841: \"$ac_try\"") >&5 + { (eval echo "$as_me:38560: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:37844: \$? = $ac_status" >&5 + echo "$as_me:38563: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_xt_ice_compat=yes else @@ -37851,7 +38570,7 @@ cf_cv_xt_ice_compat=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:37854: result: $cf_cv_xt_ice_compat" >&5 +echo "$as_me:38573: result: $cf_cv_xt_ice_compat" >&5 echo "${ECHO_T}$cf_cv_xt_ice_compat" >&6 if test "$cf_cv_xt_ice_compat" = no @@ -37865,22 +38584,36 @@ echo "${ECHO_T}$cf_cv_xt_ice_compat" >&6 *) test -n "$verbose" && echo " work around broken ICE dependency" 1>&6 -echo "${as_me:-configure}:37868: testing work around broken ICE dependency ..." 1>&5 +echo "${as_me:-configure}:38587: testing work around broken ICE dependency ..." 1>&5 if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "ice"; then test -n "$verbose" && echo " found package ice" 1>&6 -echo "${as_me:-configure}:37873: testing found package ice ..." 1>&5 +echo "${as_me:-configure}:38592: testing found package ice ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "ice" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "ice" 2>/dev/null`" test -n "$verbose" && echo " package ice CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:37879: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:38598: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package ice LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:37883: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:38602: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in ice +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -37999,17 +38732,31 @@ LIBS="$cf_add_libs" if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "sm"; then test -n "$verbose" && echo " found package sm" 1>&6 -echo "${as_me:-configure}:38002: testing found package sm ..." 1>&5 +echo "${as_me:-configure}:38735: testing found package sm ..." 1>&5 cf_pkgconfig_incs="`$PKG_CONFIG --cflags "sm" 2>/dev/null`" cf_pkgconfig_libs="`$PKG_CONFIG --libs "sm" 2>/dev/null`" test -n "$verbose" && echo " package sm CFLAGS: $cf_pkgconfig_incs" 1>&6 -echo "${as_me:-configure}:38008: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5 +echo "${as_me:-configure}:38741: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5 test -n "$verbose" && echo " package sm LIBS: $cf_pkgconfig_libs" 1>&6 -echo "${as_me:-configure}:38012: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5 +echo "${as_me:-configure}:38745: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5 + +for cf_required in sm +do + # check for duplicates + for cf_require_pkg in $REQUIRE_PKG + do + if test "$cf_required" = "$cf_require_pkg" + then + cf_required= + break + fi + done + test -n "$cf_required" && REQUIRE_PKG="$REQUIRE_PKG $cf_required" +done cf_fix_cppflags=no cf_new_cflags= @@ -38136,14 +38883,51 @@ else cf_pkgconfig_incs= cf_pkgconfig_libs= -test -n "$verbose" && echo " ...before $LIBS" 1>&6 +cf_add_libs="$LIBS" +test -n "$verbose" && echo " ...before $cf_add_libs" 1>&6 -echo "${as_me:-configure}:38141: testing ...before $LIBS ..." 1>&5 +echo "${as_me:-configure}:38889: testing ...before $cf_add_libs ..." 1>&5 -LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%-lXt %-lXt $X_PRE_LIBS %" -e 's% % %g'` -test -n "$verbose" && echo " ...after $LIBS" 1>&6 +for cf_add_1lib in $X_PRE_LIBS; do + # filter duplicates + cf_found_2lib=no + for cf_add_2lib in $cf_add_libs; do + if test "x$cf_add_1lib" = "x$cf_add_2lib"; then + cf_found_2lib=yes + break + fi + done + # if not a duplicate, find the dependent library + if test "$cf_found_2lib" = no + then + cf_found_2lib=no + cf_add_2libs= + for cf_add_2lib in $cf_add_libs + do + test -n "$cf_add_2libs" && cf_add_2libs="$cf_add_2libs " + cf_add_2libs="$cf_add_2libs$cf_add_2lib" + if test "x$cf_add_2lib" = "x-lXt" + then + cf_found_2lib=yes + cf_add_2libs="$cf_add_2libs $cf_add_1lib" + fi + done + if test "$cf_found_2lib" = yes + then + cf_add_libs="$cf_add_2libs" + else + test -n "$verbose" && echo " ...missed -lXt" 1>&6 + +echo "${as_me:-configure}:38921: testing ...missed -lXt ..." 1>&5 -echo "${as_me:-configure}:38146: testing ...after $LIBS ..." 1>&5 + fi + fi +done +test -n "$verbose" && echo " ...after $cf_add_libs" 1>&6 + +echo "${as_me:-configure}:38928: testing ...after $cf_add_libs ..." 1>&5 + +LIBS="$cf_add_libs" fi @@ -38163,7 +38947,7 @@ else test -n "$verbose" && echo " checking additions to CFLAGS" 1>&6 -echo "${as_me:-configure}:38166: testing checking additions to CFLAGS ..." 1>&5 +echo "${as_me:-configure}:38950: testing checking additions to CFLAGS ..." 1>&5 cf_check_cflags="$CFLAGS" cf_check_cppflags="$CPPFLAGS" @@ -38248,7 +39032,7 @@ done if test -n "$cf_new_cflags" ; then test -n "$verbose" && echo " add to \$CFLAGS $cf_new_cflags" 1>&6 -echo "${as_me:-configure}:38251: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5 +echo "${as_me:-configure}:39035: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5 test -n "$CFLAGS" && CFLAGS="$CFLAGS " CFLAGS="${CFLAGS}$cf_new_cflags" @@ -38258,7 +39042,7 @@ fi if test -n "$cf_new_cppflags" ; then test -n "$verbose" && echo " add to \$CPPFLAGS $cf_new_cppflags" 1>&6 -echo "${as_me:-configure}:38261: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5 +echo "${as_me:-configure}:39045: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5 test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS " CPPFLAGS="${CPPFLAGS}$cf_new_cppflags" @@ -38268,7 +39052,7 @@ fi if test -n "$cf_new_extra_cppflags" ; then test -n "$verbose" && echo " add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags" 1>&6 -echo "${as_me:-configure}:38271: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5 +echo "${as_me:-configure}:39055: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5 test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS " EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags" @@ -38277,7 +39061,7 @@ fi if test "x$cf_check_cflags" != "x$CFLAGS" ; then cat >"conftest.$ac_ext" <<_ACEOF -#line 38280 "configure" +#line 39064 "configure" #include "confdefs.h" #include int @@ -38289,16 +39073,16 @@ printf("Hello world"); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38292: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39076: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38295: \$? = $ac_status" >&5 + echo "$as_me:39079: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38298: \"$ac_try\"") >&5 + { (eval echo "$as_me:39082: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38301: \$? = $ac_status" >&5 + echo "$as_me:39085: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -38306,12 +39090,12 @@ else cat "conftest.$ac_ext" >&5 test -n "$verbose" && echo " test-compile failed. Undoing change to \$CFLAGS" 1>&6 -echo "${as_me:-configure}:38309: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5 +echo "${as_me:-configure}:39093: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5 if test "x$cf_check_cppflags" != "x$CPPFLAGS" ; then test -n "$verbose" && echo " but keeping change to \$CPPFLAGS" 1>&6 -echo "${as_me:-configure}:38314: testing but keeping change to \$CPPFLAGS ..." 1>&5 +echo "${as_me:-configure}:39098: testing but keeping change to \$CPPFLAGS ..." 1>&5 fi CFLAGS="$cf_check_cflags" @@ -38319,13 +39103,13 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi - echo "$as_me:38322: checking for XOpenDisplay" >&5 + echo "$as_me:39106: checking for XOpenDisplay" >&5 echo $ECHO_N "checking for XOpenDisplay... $ECHO_C" >&6 if test "${ac_cv_func_XOpenDisplay+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 38328 "configure" +#line 39112 "configure" #include "confdefs.h" #define XOpenDisplay autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -38356,16 +39140,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38359: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39143: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38362: \$? = $ac_status" >&5 + echo "$as_me:39146: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38365: \"$ac_try\"") >&5 + { (eval echo "$as_me:39149: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38368: \$? = $ac_status" >&5 + echo "$as_me:39152: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_XOpenDisplay=yes else @@ -38375,13 +39159,13 @@ ac_cv_func_XOpenDisplay=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:38378: result: $ac_cv_func_XOpenDisplay" >&5 +echo "$as_me:39162: result: $ac_cv_func_XOpenDisplay" >&5 echo "${ECHO_T}$ac_cv_func_XOpenDisplay" >&6 if test "$ac_cv_func_XOpenDisplay" = yes; then : else - echo "$as_me:38384: checking for XOpenDisplay in -lX11" >&5 + echo "$as_me:39168: checking for XOpenDisplay in -lX11" >&5 echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6 if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -38389,7 +39173,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lX11 $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 38392 "configure" +#line 39176 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -38408,16 +39192,16 @@ XOpenDisplay (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38411: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39195: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38414: \$? = $ac_status" >&5 + echo "$as_me:39198: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38417: \"$ac_try\"") >&5 + { (eval echo "$as_me:39201: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38420: \$? = $ac_status" >&5 + echo "$as_me:39204: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_X11_XOpenDisplay=yes else @@ -38428,7 +39212,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:38431: result: $ac_cv_lib_X11_XOpenDisplay" >&5 +echo "$as_me:39215: result: $ac_cv_lib_X11_XOpenDisplay" >&5 echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6 if test "$ac_cv_lib_X11_XOpenDisplay" = yes; then @@ -38452,13 +39236,13 @@ fi fi - echo "$as_me:38455: checking for XtAppInitialize" >&5 + echo "$as_me:39239: checking for XtAppInitialize" >&5 echo $ECHO_N "checking for XtAppInitialize... $ECHO_C" >&6 if test "${ac_cv_func_XtAppInitialize+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 38461 "configure" +#line 39245 "configure" #include "confdefs.h" #define XtAppInitialize autoconf_temporary #include /* least-intrusive standard header which defines gcc2 __stub macros */ @@ -38489,16 +39273,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38492: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39276: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38495: \$? = $ac_status" >&5 + echo "$as_me:39279: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38498: \"$ac_try\"") >&5 + { (eval echo "$as_me:39282: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38501: \$? = $ac_status" >&5 + echo "$as_me:39285: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_func_XtAppInitialize=yes else @@ -38508,13 +39292,13 @@ ac_cv_func_XtAppInitialize=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:38511: result: $ac_cv_func_XtAppInitialize" >&5 +echo "$as_me:39295: result: $ac_cv_func_XtAppInitialize" >&5 echo "${ECHO_T}$ac_cv_func_XtAppInitialize" >&6 if test "$ac_cv_func_XtAppInitialize" = yes; then : else - echo "$as_me:38517: checking for XtAppInitialize in -lXt" >&5 + echo "$as_me:39301: checking for XtAppInitialize in -lXt" >&5 echo $ECHO_N "checking for XtAppInitialize in -lXt... $ECHO_C" >&6 if test "${ac_cv_lib_Xt_XtAppInitialize+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -38522,7 +39306,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lXt $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 38525 "configure" +#line 39309 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -38541,16 +39325,16 @@ XtAppInitialize (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38544: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39328: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38547: \$? = $ac_status" >&5 + echo "$as_me:39331: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38550: \"$ac_try\"") >&5 + { (eval echo "$as_me:39334: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38553: \$? = $ac_status" >&5 + echo "$as_me:39337: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_Xt_XtAppInitialize=yes else @@ -38561,7 +39345,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:38564: result: $ac_cv_lib_Xt_XtAppInitialize" >&5 +echo "$as_me:39348: result: $ac_cv_lib_Xt_XtAppInitialize" >&5 echo "${ECHO_T}$ac_cv_lib_Xt_XtAppInitialize" >&6 if test "$ac_cv_lib_Xt_XtAppInitialize" = yes; then @@ -38578,7 +39362,7 @@ fi fi if test "$cf_have_X_LIBS" = no ; then - { echo "$as_me:38581: WARNING: Unable to successfully link X Toolkit library (-lXt) with + { echo "$as_me:39365: WARNING: Unable to successfully link X Toolkit library (-lXt) with test program. You will have to check and add the proper libraries by hand to makefile." >&5 echo "$as_me: WARNING: Unable to successfully link X Toolkit library (-lXt) with @@ -38619,14 +39403,14 @@ done test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS " CPPFLAGS="${CPPFLAGS}-I$cf_path/include" - echo "$as_me:38622: checking for $cf_test in $cf_path" >&5 + echo "$as_me:39406: checking for $cf_test in $cf_path" >&5 echo $ECHO_N "checking for $cf_test in $cf_path... $ECHO_C" >&6 else - echo "$as_me:38625: checking for $cf_test" >&5 + echo "$as_me:39409: checking for $cf_test" >&5 echo $ECHO_N "checking for $cf_test... $ECHO_C" >&6 fi cat >"conftest.$ac_ext" <<_ACEOF -#line 38629 "configure" +#line 39413 "configure" #include "confdefs.h" #include @@ -38640,16 +39424,16 @@ main (void) } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:38643: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:39427: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:38646: \$? = $ac_status" >&5 + echo "$as_me:39430: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:38649: \"$ac_try\"") >&5 + { (eval echo "$as_me:39433: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38652: \$? = $ac_status" >&5 + echo "$as_me:39436: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -38658,7 +39442,7 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest.$ac_ext" - echo "$as_me:38661: result: $cf_result" >&5 + echo "$as_me:39445: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 LIBS="$cf_save_LIBS_CF_X_ATHENA_CPPFLAGS" @@ -38674,7 +39458,7 @@ CPPFLAGS="$cf_save_CPPFLAGS_CF_X_ATHENA_ done if test -z "$cf_x_athena_inc" ; then - { echo "$as_me:38677: WARNING: Unable to find Athena header files" >&5 + { echo "$as_me:39461: WARNING: Unable to find Athena header files" >&5 echo "$as_me: WARNING: Unable to find Athena header files" >&2;} elif test "$cf_x_athena_inc" != default ; then @@ -38739,10 +39523,10 @@ for cf_add_1lib in $cf_add_0lib; do done LIBS="$cf_add_libs" - echo "$as_me:38742: checking for $cf_test in $cf_libs" >&5 + echo "$as_me:39526: checking for $cf_test in $cf_libs" >&5 echo $ECHO_N "checking for $cf_test in $cf_libs... $ECHO_C" >&6 cat >"conftest.$ac_ext" <<_ACEOF -#line 38745 "configure" +#line 39529 "configure" #include "confdefs.h" $ac_includes_default @@ -38759,16 +39543,16 @@ $cf_test((XtAppContext) 0) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:38762: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39546: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:38765: \$? = $ac_status" >&5 + echo "$as_me:39549: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:38768: \"$ac_try\"") >&5 + { (eval echo "$as_me:39552: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:38771: \$? = $ac_status" >&5 + echo "$as_me:39555: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -38777,7 +39561,7 @@ cat "conftest.$ac_ext" >&5 cf_result=no fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" - echo "$as_me:38780: result: $cf_result" >&5 + echo "$as_me:39564: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 LIBS="$cf_save_LIBS_CF_X_ATHENA_LIBS" @@ -38794,7 +39578,7 @@ CPPFLAGS="$cf_save_CPPFLAGS_CF_X_ATHENA_ done if test -z "$cf_x_athena_lib" ; then - { { echo "$as_me:38797: error: Unable to successfully link Athena library (-l$cf_x_athena_root) with test program" >&5 + { { echo "$as_me:39581: error: Unable to successfully link Athena library (-l$cf_x_athena_root) with test program" >&5 echo "$as_me: error: Unable to successfully link Athena library (-l$cf_x_athena_root) with test program" >&2;} { (exit 1); exit 1; }; } fi @@ -38828,7 +39612,7 @@ if test -n "$ac_tool_prefix"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:38831: checking for $ac_word" >&5 +echo "$as_me:39615: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_XCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -38843,7 +39627,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_XCURSES_CONFIG="$ac_tool_prefix$ac_prog" -echo "$as_me:38846: found $ac_dir/$ac_word" >&5 +echo "$as_me:39630: found $ac_dir/$ac_word" >&5 break done @@ -38851,10 +39635,10 @@ fi fi XCURSES_CONFIG=$ac_cv_prog_XCURSES_CONFIG if test -n "$XCURSES_CONFIG"; then - echo "$as_me:38854: result: $XCURSES_CONFIG" >&5 + echo "$as_me:39638: result: $XCURSES_CONFIG" >&5 echo "${ECHO_T}$XCURSES_CONFIG" >&6 else - echo "$as_me:38857: result: no" >&5 + echo "$as_me:39641: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -38867,7 +39651,7 @@ if test -z "$XCURSES_CONFIG"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:38870: checking for $ac_word" >&5 +echo "$as_me:39654: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_XCURSES_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -38882,7 +39666,7 @@ for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. $as_executable_p "$ac_dir/$ac_word" || continue ac_cv_prog_ac_ct_XCURSES_CONFIG="$ac_prog" -echo "$as_me:38885: found $ac_dir/$ac_word" >&5 +echo "$as_me:39669: found $ac_dir/$ac_word" >&5 break done @@ -38890,10 +39674,10 @@ fi fi ac_ct_XCURSES_CONFIG=$ac_cv_prog_ac_ct_XCURSES_CONFIG if test -n "$ac_ct_XCURSES_CONFIG"; then - echo "$as_me:38893: result: $ac_ct_XCURSES_CONFIG" >&5 + echo "$as_me:39677: result: $ac_ct_XCURSES_CONFIG" >&5 echo "${ECHO_T}$ac_ct_XCURSES_CONFIG" >&6 else - echo "$as_me:38896: result: no" >&5 + echo "$as_me:39680: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -39028,7 +39812,7 @@ LDFLAGS="$LDFLAGS $X_LIBS" test -n "$verbose" && echo " checking additions to CFLAGS" 1>&6 -echo "${as_me:-configure}:39031: testing checking additions to CFLAGS ..." 1>&5 +echo "${as_me:-configure}:39815: testing checking additions to CFLAGS ..." 1>&5 cf_check_cflags="$CFLAGS" cf_check_cppflags="$CPPFLAGS" @@ -39113,7 +39897,7 @@ done if test -n "$cf_new_cflags" ; then test -n "$verbose" && echo " add to \$CFLAGS $cf_new_cflags" 1>&6 -echo "${as_me:-configure}:39116: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5 +echo "${as_me:-configure}:39900: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5 test -n "$CFLAGS" && CFLAGS="$CFLAGS " CFLAGS="${CFLAGS}$cf_new_cflags" @@ -39123,7 +39907,7 @@ fi if test -n "$cf_new_cppflags" ; then test -n "$verbose" && echo " add to \$CPPFLAGS $cf_new_cppflags" 1>&6 -echo "${as_me:-configure}:39126: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5 +echo "${as_me:-configure}:39910: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5 test -n "$CPPFLAGS" && CPPFLAGS="$CPPFLAGS " CPPFLAGS="${CPPFLAGS}$cf_new_cppflags" @@ -39133,7 +39917,7 @@ fi if test -n "$cf_new_extra_cppflags" ; then test -n "$verbose" && echo " add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags" 1>&6 -echo "${as_me:-configure}:39136: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5 +echo "${as_me:-configure}:39920: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5 test -n "$EXTRA_CPPFLAGS" && EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS " EXTRA_CPPFLAGS="${EXTRA_CPPFLAGS}$cf_new_extra_cppflags" @@ -39142,7 +39926,7 @@ fi if test "x$cf_check_cflags" != "x$CFLAGS" ; then cat >"conftest.$ac_ext" <<_ACEOF -#line 39145 "configure" +#line 39929 "configure" #include "confdefs.h" #include int @@ -39154,16 +39938,16 @@ printf("Hello world"); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:39157: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39941: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:39160: \$? = $ac_status" >&5 + echo "$as_me:39944: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:39163: \"$ac_try\"") >&5 + { (eval echo "$as_me:39947: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:39166: \$? = $ac_status" >&5 + echo "$as_me:39950: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then : else @@ -39171,12 +39955,12 @@ else cat "conftest.$ac_ext" >&5 test -n "$verbose" && echo " test-compile failed. Undoing change to \$CFLAGS" 1>&6 -echo "${as_me:-configure}:39174: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5 +echo "${as_me:-configure}:39958: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5 if test "x$cf_check_cppflags" != "x$CPPFLAGS" ; then test -n "$verbose" && echo " but keeping change to \$CPPFLAGS" 1>&6 -echo "${as_me:-configure}:39179: testing but keeping change to \$CPPFLAGS ..." 1>&5 +echo "${as_me:-configure}:39963: testing but keeping change to \$CPPFLAGS ..." 1>&5 fi CFLAGS="$cf_check_cflags" @@ -39184,7 +39968,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:39187: checking for XOpenDisplay in -lX11" >&5 +echo "$as_me:39971: checking for XOpenDisplay in -lX11" >&5 echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6 if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -39192,7 +39976,7 @@ else ac_check_lib_save_LIBS=$LIBS LIBS="-lX11 $X_PRE_LIBS $LIBS $X_EXTRA_LIBS $LIBS" cat >"conftest.$ac_ext" <<_ACEOF -#line 39195 "configure" +#line 39979 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ @@ -39211,16 +39995,16 @@ XOpenDisplay (); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:39214: \"$ac_link\"") >&5 +if { (eval echo "$as_me:39998: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:39217: \$? = $ac_status" >&5 + echo "$as_me:40001: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:39220: \"$ac_try\"") >&5 + { (eval echo "$as_me:40004: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:39223: \$? = $ac_status" >&5 + echo "$as_me:40007: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then ac_cv_lib_X11_XOpenDisplay=yes else @@ -39231,7 +40015,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:39234: result: $ac_cv_lib_X11_XOpenDisplay" >&5 +echo "$as_me:40018: result: $ac_cv_lib_X11_XOpenDisplay" >&5 echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6 if test "$ac_cv_lib_X11_XOpenDisplay" = yes; then @@ -39253,7 +40037,7 @@ LIBS="$cf_add_libs" fi -echo "$as_me:39256: checking for XCurses library" >&5 +echo "$as_me:40040: checking for XCurses library" >&5 echo $ECHO_N "checking for XCurses library... $ECHO_C" >&6 if test "${cf_cv_lib_XCurses+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -39276,7 +40060,7 @@ done LIBS="$cf_add_libs" cat >"conftest.$ac_ext" <<_ACEOF -#line 39279 "configure" +#line 40063 "configure" #include "confdefs.h" #include @@ -39291,16 +40075,16 @@ XCursesExit(); } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:39294: \"$ac_link\"") >&5 +if { (eval echo "$as_me:40078: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:39297: \$? = $ac_status" >&5 + echo "$as_me:40081: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:39300: \"$ac_try\"") >&5 + { (eval echo "$as_me:40084: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:39303: \$? = $ac_status" >&5 + echo "$as_me:40087: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_lib_XCurses=yes else @@ -39311,7 +40095,7 @@ fi rm -f "conftest.$ac_objext" "conftest$ac_exeext" "conftest.$ac_ext" fi -echo "$as_me:39314: result: $cf_cv_lib_XCurses" >&5 +echo "$as_me:40098: result: $cf_cv_lib_XCurses" >&5 echo "${ECHO_T}$cf_cv_lib_XCurses" >&6 fi @@ -39326,23 +40110,23 @@ cat >>confdefs.h <<\EOF #define XCURSES 1 EOF - echo "$as_me:39329: checking for xcurses.h" >&5 + echo "$as_me:40113: checking for xcurses.h" >&5 echo $ECHO_N "checking for xcurses.h... $ECHO_C" >&6 if test "${ac_cv_header_xcurses_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >"conftest.$ac_ext" <<_ACEOF -#line 39335 "configure" +#line 40119 "configure" #include "confdefs.h" #include _ACEOF -if { (eval echo "$as_me:39339: \"$ac_cpp "conftest.$ac_ext"\"") >&5 +if { (eval echo "$as_me:40123: \"$ac_cpp "conftest.$ac_ext"\"") >&5 (eval $ac_cpp "conftest.$ac_ext") 2>conftest.er1 ac_status=$? $EGREP -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 - echo "$as_me:39345: \$? = $ac_status" >&5 + echo "$as_me:40129: \$? = $ac_status" >&5 (exit "$ac_status"); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag @@ -39361,7 +40145,7 @@ else fi rm -f conftest.err "conftest.$ac_ext" fi -echo "$as_me:39364: result: $ac_cv_header_xcurses_h" >&5 +echo "$as_me:40148: result: $ac_cv_header_xcurses_h" >&5 echo "${ECHO_T}$ac_cv_header_xcurses_h" >&6 if test "$ac_cv_header_xcurses_h" = yes; then @@ -39372,14 +40156,14 @@ EOF fi else - { { echo "$as_me:39375: error: Cannot link with XCurses" >&5 + { { echo "$as_me:40159: error: Cannot link with XCurses" >&5 echo "$as_me: error: Cannot link with XCurses" >&2;} { (exit 1); exit 1; }; } fi fi -echo "$as_me:39382: checking for unctrl.h" >&5 +echo "$as_me:40166: checking for unctrl.h" >&5 echo $ECHO_N "checking for unctrl.h... $ECHO_C" >&6 if test "${cf_cv_unctrl_header+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -39400,7 +40184,7 @@ esac for cf_header in $cf_header_list do cat >"conftest.$ac_ext" <<_ACEOF -#line 39403 "configure" +#line 40187 "configure" #include "confdefs.h" #include <${cf_cv_ncurses_header:-curses.h}> @@ -39414,16 +40198,16 @@ WINDOW *x; (void)x } _ACEOF rm -f "conftest.$ac_objext" -if { (eval echo "$as_me:39417: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:40201: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:39420: \$? = $ac_status" >&5 + echo "$as_me:40204: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest.$ac_objext"' - { (eval echo "$as_me:39423: \"$ac_try\"") >&5 + { (eval echo "$as_me:40207: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:39426: \$? = $ac_status" >&5 + echo "$as_me:40210: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_cv_unctrl_header=$cf_header break @@ -39436,12 +40220,12 @@ rm -f "conftest.$ac_objext" "conftest.$a done fi -echo "$as_me:39439: result: $cf_cv_unctrl_header" >&5 +echo "$as_me:40223: result: $cf_cv_unctrl_header" >&5 echo "${ECHO_T}$cf_cv_unctrl_header" >&6 case "$cf_cv_unctrl_header" in no) - { echo "$as_me:39444: WARNING: unctrl.h header not found" >&5 + { echo "$as_me:40228: WARNING: unctrl.h header not found" >&5 echo "$as_me: WARNING: unctrl.h header not found" >&2;} ;; esac @@ -39475,10 +40259,10 @@ do cf_tr_func=`echo "$cf_func" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%` - echo "$as_me:39478: checking for ${cf_func}" >&5 + echo "$as_me:40262: checking for ${cf_func}" >&5 echo $ECHO_N "checking for ${cf_func}... $ECHO_C" >&6 -echo "${as_me:-configure}:39481: testing ${cf_func} ..." 1>&5 +echo "${as_me:-configure}:40265: testing ${cf_func} ..." 1>&5 if eval "test \"\${cf_cv_func_$cf_func+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -39487,7 +40271,7 @@ else eval cf_result='$ac_cv_func_'$cf_func if test ".$cf_result" != ".no"; then cat >"conftest.$ac_ext" <<_ACEOF -#line 39490 "configure" +#line 40274 "configure" #include "confdefs.h" #ifdef HAVE_XCURSES @@ -39520,16 +40304,16 @@ if (foo + 1234L > 5678L) } _ACEOF rm -f "conftest.$ac_objext" "conftest$ac_exeext" -if { (eval echo "$as_me:39523: \"$ac_link\"") >&5 +if { (eval echo "$as_me:40307: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:39526: \$? = $ac_status" >&5 + echo "$as_me:40310: \$? = $ac_status" >&5 (exit "$ac_status"); } && { ac_try='test -s "conftest$ac_exeext"' - { (eval echo "$as_me:39529: \"$ac_try\"") >&5 + { (eval echo "$as_me:40313: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:39532: \$? = $ac_status" >&5 + echo "$as_me:40316: \$? = $ac_status" >&5 (exit "$ac_status"); }; }; then cf_result=yes else @@ -39545,7 +40329,7 @@ fi # use the computed/retrieved cache-value: eval 'cf_result=$cf_cv_func_'$cf_func - echo "$as_me:39548: result: $cf_result" >&5 + echo "$as_me:40332: result: $cf_result" >&5 echo "${ECHO_T}$cf_result" >&6 if test "$cf_result" != no; then cat >>confdefs.h <&5 + { echo "$as_me:40344: WARNING: no term-lib found, you might run into trouble later." >&5 echo "$as_me: WARNING: no term-lib found, you might run into trouble later." >&2;} fi if test "$YACC" = "" ; then - { echo "$as_me:39564: WARNING: no yacc-parser found, you might run into trouble later." >&5 + { echo "$as_me:40348: WARNING: no yacc-parser found, you might run into trouble later." >&5 echo "$as_me: WARNING: no yacc-parser found, you might run into trouble later." >&2;} fi if test "$RANLIB" = "" ; then - { echo "$as_me:39568: WARNING: no library archive builder found, you might run into trouble later." >&5 + { echo "$as_me:40352: WARNING: no library archive builder found, you might run into trouble later." >&5 echo "$as_me: WARNING: no library archive builder found, you might run into trouble later." >&2;} fi @@ -39696,7 +40480,7 @@ DEFS=-DHAVE_CONFIG_H : "${CONFIG_STATUS=./config.status}" ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:39699: creating $CONFIG_STATUS" >&5 +{ echo "$as_me:40483: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >"$CONFIG_STATUS" <<_ACEOF #! $SHELL @@ -39832,7 +40616,7 @@ EOF cat >>"$CONFIG_STATUS" <>"$CONFIG_STATUS" <<\EOF echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header - { { echo "$as_me:39880: error: ambiguous option: $1 + { { echo "$as_me:40664: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} @@ -39896,7 +40680,7 @@ Try \`$0 --help' for more information." ac_need_defaults=false;; # This is an error. - -*) { { echo "$as_me:39899: error: unrecognized option: $1 + -*) { { echo "$as_me:40683: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} @@ -39915,7 +40699,7 @@ cat >&5 << _ACEOF ## Running config.status. ## ## ----------------------- ## -This file was extended by $as_me 2.52.20240618, executed with +This file was extended by $as_me 2.52.20250126, executed with CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS @@ -39944,7 +40728,7 @@ do "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "include/autoconf.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/autoconf.h:include/autoconf.hin" ;; - *) { { echo "$as_me:39947: error: invalid argument: $ac_config_target" >&5 + *) { { echo "$as_me:40731: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac @@ -40110,6 +40894,7 @@ s,@SPOOLDIR@,$SPOOLDIR,;t t s,@NOVROOTDIR@,$NOVROOTDIR,;t t s,@INEWSDIR@,$INEWSDIR,;t t s,@INEWS@,$INEWS,;t t +s,@REQUIRE_PKG@,$REQUIRE_PKG,;t t s,@NCURSES_CONFIG@,$NCURSES_CONFIG,;t t s,@ac_ct_NCURSES_CONFIG@,$ac_ct_NCURSES_CONFIG,;t t s,@PCRE2_CONFIG@,$PCRE2_CONFIG,;t t @@ -40286,7 +41071,7 @@ done; } esac if test x"$ac_file" != x-; then - { echo "$as_me:40289: creating $ac_file" >&5 + { echo "$as_me:41074: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi @@ -40304,7 +41089,7 @@ echo "$as_me: creating $ac_file" >&6;} -) echo "$tmp"/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:40307: error: cannot find input file: $f" >&5 + test -f "$f" || { { echo "$as_me:41092: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; @@ -40317,7 +41102,7 @@ echo "$as_me: error: cannot find input f echo "$srcdir/$f" else # /dev/null tree - { { echo "$as_me:40320: error: cannot find input file: $f" >&5 + { { echo "$as_me:41105: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; @@ -40333,7 +41118,7 @@ cat >>"$CONFIG_STATUS" <<\EOF if test -n "$ac_seen"; then ac_used=`grep '@datarootdir@' "$ac_item"` if test -z "$ac_used"; then - { echo "$as_me:40336: WARNING: datarootdir was used implicitly but not set: + { echo "$as_me:41121: WARNING: datarootdir was used implicitly but not set: $ac_seen" >&5 echo "$as_me: WARNING: datarootdir was used implicitly but not set: $ac_seen" >&2;} @@ -40342,7 +41127,7 @@ $ac_seen" >&2;} fi ac_seen=`grep '${datarootdir}' "$ac_item"` if test -n "$ac_seen"; then - { echo "$as_me:40345: WARNING: datarootdir was used explicitly but not set: + { echo "$as_me:41130: WARNING: datarootdir was used explicitly but not set: $ac_seen" >&5 echo "$as_me: WARNING: datarootdir was used explicitly but not set: $ac_seen" >&2;} @@ -40387,7 +41172,7 @@ cat >>"$CONFIG_STATUS" <<\EOF ac_init=`$EGREP '[ ]*'$ac_name'[ ]*=' "$ac_file"` if test -z "$ac_init"; then ac_seen=`echo "$ac_seen" |sed -e 's,^,'"$ac_file"':,'` - { echo "$as_me:40390: WARNING: Variable $ac_name is used but was not set: + { echo "$as_me:41175: WARNING: Variable $ac_name is used but was not set: $ac_seen" >&5 echo "$as_me: WARNING: Variable $ac_name is used but was not set: $ac_seen" >&2;} @@ -40398,7 +41183,7 @@ $ac_seen" >&2;} $EGREP -n '@[A-Z_][A-Z_0-9]+@' "$ac_file" >>"$tmp"/out if test -s "$tmp"/out; then ac_seen=`sed -e 's,^,'"$ac_file"':,' < "$tmp"/out` - { echo "$as_me:40401: WARNING: Some variables may not be substituted: + { echo "$as_me:41186: WARNING: Some variables may not be substituted: $ac_seen" >&5 echo "$as_me: WARNING: Some variables may not be substituted: $ac_seen" >&2;} @@ -40447,7 +41232,7 @@ for ac_file in : $CONFIG_HEADERS; do tes * ) ac_file_in=$ac_file.in ;; esac - test x"$ac_file" != x- && { echo "$as_me:40450: creating $ac_file" >&5 + test x"$ac_file" != x- && { echo "$as_me:41235: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the @@ -40458,7 +41243,7 @@ echo "$as_me: creating $ac_file" >&6;} -) echo "$tmp"/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:40461: error: cannot find input file: $f" >&5 + test -f "$f" || { { echo "$as_me:41246: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; @@ -40471,7 +41256,7 @@ echo "$as_me: error: cannot find input f echo "$srcdir/$f" else # /dev/null tree - { { echo "$as_me:40474: error: cannot find input file: $f" >&5 + { { echo "$as_me:41259: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; @@ -40590,7 +41375,7 @@ cat >>"$CONFIG_STATUS" <<\EOF rm -f "$tmp"/in if test x"$ac_file" != x-; then if cmp -s "$ac_file" "$tmp/config.h" 2>/dev/null; then - { echo "$as_me:40593: $ac_file is unchanged" >&5 + { echo "$as_me:41378: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ diff -Nurp '--exclude=.bzr*' tin-2.6.4/configure.in tin-2.6.5/configure.in --- tin-2.6.4/configure.in 2024-12-24 00:18:40.000000000 +0100 +++ tin-2.6.5/configure.in 2025-12-24 00:14:31.826305717 +0100 @@ -2,10 +2,10 @@ dnl Project : tin - a Usenet reader dnl Module : configure.in dnl Author : Thomas E. Dickey dnl Created : 1995-08-24 -dnl Updated : 2024-12-15 +dnl Updated : 2025-11-08 dnl Notes : dnl -dnl Copyright (c) 1995-2024 Thomas E. Dickey +dnl Copyright (c) 1995-2026 Thomas E. Dickey dnl All rights reserved. dnl dnl Redistribution and use in source and binary forms, with or without @@ -41,7 +41,7 @@ AC_PREFIX_DEFAULT(/usr/local) dnl PACKAGE is required for GNU gettext PACKAGE=tin -VERSION=2.6.4 +VERSION=2.6.5 AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Define this to the package name]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Define this to the package version]) AC_SUBST(PACKAGE) @@ -81,7 +81,7 @@ case "$host_os" in esac ### Native Language Support -ALL_LINGUAS="da de en_GB es et fr ru sv tr zh_CN zh_TW" +ALL_LINGUAS="da de en_GB es et fr ro ru sv tr zh_CN zh_TW" ### Checks for programs save_CFLAGS="$CFLAGS" @@ -222,7 +222,9 @@ CF_ARG_ENABLE(nntp-only, USE_SPOOLDIR=no], [AC_DEFINE(NNTP_ABLE,1,[Define this to 1 to be NNTP-capable])]) AC_MSG_RESULT($enableval) +fi +# can be also used for cached local overviews, so do not depend on USE_NNTP AC_MSG_CHECKING(if you want to use zlib for COMPRESS DEFLATE support) AC_ARG_WITH(zlib, [ --with-zlib use zlib for COMPRESS DEFLATE], @@ -235,8 +237,6 @@ if test ".$use_zlib" != ".no" ; then test "x$cf_cv_find_linkage_z" = "xyes" && AC_DEFINE(USE_ZLIB,1,[Define to 1 if you want to use zlib for COMPRESS DEFLATE]) fi -fi - ### use option --enable-debug to compile-in test/development code AC_MSG_CHECKING(if you want to compile-in debug support) CF_ARG_ENABLE(debug, @@ -632,13 +632,16 @@ else fi AC_SUBST(CANDIR_MAKE) + ## gsasl - used for AUTH SASL PLAIN ## we currently check for gsasl_free() (avail since 0.2.19) ## update if we ever use calls from a newer API gsasl=no +if test "$USE_NNTP" = "yes" ; then AC_CHECK_HEADER(gsasl.h, [AC_CHECK_LIB(gsasl, gsasl_free, gsasl=yes)] ) +fi if test "$gsasl" = "yes"; then CF_ARG_DISABLE(gsasl, [ --disable-gsasl don't use GNU SASL], @@ -744,20 +747,6 @@ CF_ARG_DISABLE(append-pid, [AC_DEFINE(APPEND_PID,1,[Define this to 1 to unique tmp-files by appending .pid])]) AC_MSG_RESULT($enableval) -AC_MSG_CHECKING(whether to fallback to XHDR XREF if XOVER isn't supported) -CF_ARG_DISABLE(xhdr-xref, - [ --disable-xhdr-xref disable XHDR XREF fallback],, - [AC_DEFINE(XHDR_XREF,1,[Define this to 1 to fallback to XHDR XREF if XOVER isn't supported])]) -AC_MSG_RESULT($enableval) - -### bypass a bug in old versions of leafnode & NNTPcache -AC_MSG_CHECKING(whether to send a GROUP command before a LISTGROUP) -CF_ARG_ENABLE(broken-listgroup-fix, - [ --enable-broken-listgroup-fix - send extra GROUP command before LISTGROUP], - [AC_DEFINE(BROKEN_LISTGROUP,1,[Define this to 1 to send a GROUP command before a LISTGROUP])]) -AC_MSG_RESULT($enableval) - ### on some old systems the WIFEXITED()/WEXITSTATUS() macros do not work AC_MSG_CHECKING(whether to ignore system()s return value) CF_ARG_ENABLE(broken-system-fix, @@ -822,7 +811,12 @@ AC_TRY_COMPILE([ #if TLS_API < 20200120 #error "Please use LibreSSL TLS_API >= 20200120" #endif /* TLS_API < 20200120 */ -],[have_libtls=yes],[ +],[ +have_libtls=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_libtls) +fi +],[ have_libtls=no AC_MSG_RESULT([\tLibreSSL TLS_API too old (< 20200120)]) ])],[ @@ -837,6 +831,9 @@ AC_TRY_COMPILE([ ],[ LIBS="$LIBS -ltls" have_libtls=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_libtls) +fi ],[have_libtls=no AC_MSG_RESULT([\tLibreSSL TLS_API too old (< 20200120)]) ]) @@ -860,7 +857,12 @@ AC_TRY_COMPILE([ #if defined(LIBRESSL_VERSION_NUMBER) #error "Please use real OpenSSL >= 1.1.1" #endif /* LIBRESSL pretending to be OPENSSL */ -],[have_openssl=yes],[ +],[ +have_openssl=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_openssl) +fi +],[ have_openssl=no AC_MSG_RESULT([\tOpenSSL too old (< 1.1.1)]) ])],[ @@ -878,7 +880,12 @@ AC_TRY_COMPILE([ #if GNUTLS_VERSION_NUMBER < 0x030700 #error "Please use GnuTLS >= 3.7.0" #endif /* GNUTLS_VERSION_NUMBER < 0x030700 */ -],[have_gnutls=yes],[ +],[ +have_gnutls=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_gnutls) +fi +],[ AC_MSG_RESULT([\tGnuTLS too old (< 3.7.0)]) ])],[ AC_CHECK_LIB(gnutls,gnutls_certificate_allocate_credentials,[ @@ -893,12 +900,15 @@ AC_TRY_COMPILE([ ],[ LIBS="$LIBS -lgnutls" have_gnutls=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_gnutls) +fi ],[have_gnutls=no AC_MSG_RESULT([\tGnuTLS too old (< 3.7.0)]) ]) ],[have_gnutls=no]) ],[ -have_gnutls=no=no +have_gnutls=no AC_MSG_RESULT($have_gnutls) ])])]) @@ -914,7 +924,6 @@ AC_MSG_RESULT($have_gnutls) ### as the above is already complicated enough, the following will be dealt ### with separately AS_IF([test "$have_libtls" = "yes"],[ - AC_MSG_CHECKING(for libcrypto) CF_TRY_PKG_CONFIG([crypto],[ AC_TRY_COMPILE([ #include @@ -922,12 +931,10 @@ AS_IF([test "$have_libtls" = "yes"],[ BIO_free(NULL); ], [ - have_libcrypto=yes AC_DEFINE(HAVE_LIB_CRYPTO,1,[Define to 1 if we can/should compile with the OpenSSL crypto library]) ], [ have_libcrypto=no - AC_MSG_RESULT($have_libcrypto) ] ) ],[ @@ -956,24 +963,75 @@ BIO_free(NULL); ]) fi +AC_MSG_CHECKING([whether to enable URL normalization]) +AC_ARG_WITH( + url_normalization, + [ --with-url-normalization=lib + do URL normalization, needs liburiparser or libcurl + possible values: uriparser, curl], + [enable_url_normalization=$withval], + [enable_url_normalization="yes"]) +AC_MSG_RESULT($enable_url_normalization) +AS_IF([test "$enable_url_normalization" != "no"], + [AS_IF([test "$enable_url_normalization" = "yes" || test "$enable_url_normalization" = "uriparser"],[ # AC_MSG_CHECKING(for liburiparser) +cf_save_LIBS="$LIBS" +cf_save_CPPFLAGS="$CPPFLAGS" CF_TRY_PKG_CONFIG( [liburiparser], - [AC_DEFINE(HAVE_LIBURIPARSER)], [AC_TRY_COMPILE([ #include ],[ -#if URI_VER_MAJOR = 0 && URI_VER_MINOR <= 9 && URI_VER_RELEASE <= 7 +#if URI_VER_MAJOR <= 0 && URI_VER_MINOR <= 9 && URI_VER_RELEASE <= 7 #error "Please use liburiparser >= 0.9.8" #endif /* URI_VER_MAJOR */ ], - [have_liburiparser=yes], - [have_liburiparser=no - AC_MSG_RESULT($have_liburiparser)] - )] -) + [have_liburiparser="yes" + if test x"$verbose" != "xyes" ; then + AC_MSG_RESULT($have_liburiparser) + fi + AC_DEFINE(HAVE_LIBURIPARSER)], + [have_liburiparser="no" + LIBS=$cf_save_LIBS + CPPFLAGS=$cf_save_CPPFLAGS + AC_MSG_RESULT([\tliburiparser too old (< 0.9.8)])] + )],[ + have_liburiparser="no" + AC_MSG_RESULT($have_liburiparser) + ] +)]) + +# libcurl +AS_IF([test "$enable_url_normalization" = "yes" && test "$have_liburiparser" = "no" || test "$enable_url_normalization" = "curl"], +[AC_MSG_CHECKING(for libcurl) + cf_save_LIBS="$LIBS" + cf_save_CPPFLAGS="$CPPFLAGS" + CF_TRY_PKG_CONFIG( + [libcurl], + [AC_TRY_COMPILE([ +#include + ],[ +#if !CURL_AT_LEAST_VERSION(7, 78, 0) +#error "Please use libcurl >= 7.78.0" +#endif + ],[ + have_libcurl="yes" + if test x"$verbose" != "xyes" ; then + AC_MSG_RESULT($have_libcurl) + fi + AC_DEFINE(HAVE_LIBCURL) + ],[ + have_libcurl="no" + LIBS=$cf_save_LIBS + CPPFLAGS=$cf_save_CPPFLAGS + AC_MSG_RESULT([\tlibcurl too old (< 7.78.0]) + ])],[ + have_libcurl="no" + AC_MSG_RESULT($have_libcurl) + ])] +)]) CF_FUNC_CURSES_VERSION @@ -1022,6 +1080,7 @@ CF_CHECK_HEADERS(\ malloc.h \ netdb.h \ netinet/in.h \ + netinet/tcp.h \ netlib.h \ nl_types.h \ nomacros.h \ @@ -1174,6 +1233,14 @@ if test $ac_cv_nl_item = yes; then AC_DEFINE(HAVE_NL_ITEM,1,[Define this to 1 if we have header nl_types.h]) fi +AC_CHECK_TYPES([sig_atomic_t], [], [], +[ +#include +#include +]) + +AC_C_VOLATILE + ### Checks for libraries. # libuu/uudeview # only define HAVE_LIBUU and HAVE_UUDEVIEW_H if both are found @@ -1250,7 +1317,7 @@ AC_CHECK_HEADERS(unicode/unorm.h unicode #AC_CHECK_LIB(icuuc, ubidi_open, # [AC_DEFINE(HAVE_UBIDI_OPEN, 1, [Define to 1 if you have ubidi_open])] #) -# ok, we go with +# ok, we go with (but that mistakenly applies on i.e. sortix-1.1.0-dev) if test x"$ac_cv_header_unicode_ucnv_h" = "xyes" ; then AC_DEFINE(HAVE_UCNV_OPEN, 1) fi @@ -1316,7 +1383,11 @@ CF_TRY_PKG_CONFIG( [libidn2], [AC_DEFINE(HAVE_LIBIDN2) AC_DEFINE(HAVE_IDN2_H) - have_libidn2=yes], + have_libidn2=yes +if test x"$verbose" != "xyes" ; then +AC_MSG_RESULT($have_libidn2) +fi +], [AC_TRY_COMPILE([ #include ],[ @@ -1325,10 +1396,14 @@ CF_TRY_PKG_CONFIG( #endif /* IDN2_VERSION_MAJOR < 2 || (IDN2_VERSION_MAJOR == 2 && IDN2_VERSION_MINOR < 3) */ ], [have_libidn2=yes - AC_DEFINE(HAVE_IDN2_H)], + AC_DEFINE(HAVE_IDN2_H) +AC_MSG_RESULT($have_libidn2) +], [have_libidn2=no AC_MSG_RESULT($have_libidn2)] - )] + )], + [have_libidn2=no + AC_MSG_RESULT($have_libidn2)] ) # libidnkit - Internationalized Domain Names / IDN 2008 @@ -1431,7 +1506,6 @@ CF_STRERROR AC_CHECK_FUNCS(\ alarm \ arc4random_uniform \ - atoi \ atol \ atoll \ atoq \ @@ -1455,6 +1529,7 @@ AC_CHECK_FUNCS(\ isascii \ lockf \ lrand48 \ + lstat \ memcmp \ memcpy \ memmove \ @@ -1462,13 +1537,16 @@ AC_CHECK_FUNCS(\ mkdir \ mkfifo \ mktemp \ + mktime \ mkstemp \ nl_langinfo \ poll \ + posix_close \ putenv \ random \ - rewinddir \ + realpath \ resizeterm \ + rewinddir \ select \ setenv \ setlocale \ @@ -1481,6 +1559,7 @@ AC_CHECK_FUNCS(\ strcasestr \ strdup \ strftime \ + strptime \ strpbrk \ strrchr \ strrstr \ @@ -1574,8 +1653,10 @@ AC_CHECK_FUNCS(\ gethostbyname \ getpeername \ getservbyname \ + getsockopt \ inet_addr \ inet_ntoa \ + setsockopt \ strncasecmp \ ) @@ -1675,7 +1756,6 @@ CHECK_DECL_HDRS="$TIN_DECL_HDRS" CF_CHECK_DECL(\ _flsbuf \ alarm \ - atoi \ atol \ atoll \ atoq \ @@ -1722,6 +1802,7 @@ CF_CHECK_DECL(\ sscanf \ strcasecmp \ strftime \ + strptime \ strncasecmp \ strtol \ strtoll \ @@ -1998,6 +2079,7 @@ int main(void) { if ((cd = iconv_open("US-ASCII//TRANSLIT", "ISO-8859-1")) == (iconv_t) (-1)) exit(1); + iconv_close(cd); exit(0); }], [ diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/CHANGES tin-2.6.5/doc/CHANGES --- tin-2.6.4/doc/CHANGES 2024-12-23 10:51:02.000000000 +0100 +++ tin-2.6.5/doc/CHANGES 2025-12-23 04:06:10.050955264 +0100 @@ -1,3 +1,144 @@ +-- 2.6.5 release 20251224 "Glenury" -- + + 030) Thomas E. Dickey + ADD. update configure macros + FIX. aclocal.m4 + + 029) Remus-Gabriel Chelu + ADD. Romanian translation + FIX. ro.po + + 028) Bjarni Ingi Gislason + ADD. manpage fixes (debian bug #1093395, #1096177) + FIX. tin.[15] + + 027) Dennis Preiser + ADD. avoid macro in snprintf() as that might be a macro too + ADD. fallback code for the !CPP_DOES_CONCAT case + ADD. plural forms + ADD. prefer MIME filename*-parameter over filename-parameter + ADD. if a MIME filename parameter is empty after path removal fallback + to the next filename parameter if available. + ADD. PageToggleVerbatim (,) + ADD. validate undeclared_charset in 'M'enu + ADD. extend verbatim_handling options + ADD. ignore col_invers_bg == col_invers_fg == -1 + ADD. page_yenc_format + ADD. per scope hide_inline_data via attributes + ADD. cleanup draw_page_header(), fmt_option_prompt() + ADD. color the color-menu items while selecting the color + ADD. serverrc-menu via ConfigServerrcMenu ('s') + ADD. per scope getart_limit via attributes + ADD. indicators in scopes menu to show which scopes do match + the current group (scope_marked_global_match, + scope_marked_local_match) + ADD. make the mark in scopes menu for global/local scopes + configurable (scope_marked_global, scope_marked_local) + BUG. -L/'L' did depend on sort_article_type/sort_threads_type + and failed for some combinations + BUG. possible memleaks + BUG. layout issue with multibyte chars on posting history screen + BUG. IGNORE_ART() macro didn't honor kill_level == KILL_THREAD + BUG. possible buffer overflow with -C + FIX. active.c, art.c, attrib.c, charset.c, color.c, config.c, cook.c + curses.c, feed.c, filter.c, global.c, group.c, header.c, help.c + init.c, keymap.c, lang.c, main.c, makecfg.c, memory.c, misc.c + nntplib.c, options_menu.c, page.c, post.c, prompt.c, refs.c + rfc2045.c, rfc2046.c, rfc2047.c, save.c, search.c, select.c + signal.c, string.c, tcurses.c, thread.c, xref.c, extern.h, keymap.h + proto.h, rfc2046.h, tin.h, tinrc.h, tincfg.tbl, tin.[15] + + 026) Urs Janssen + ADD. avoid bison warning + ADD. use ngettext(3) for plural-forms + ADD. avoid "install -D" + ADD. --with-url-normalization[=[uriparser,curl] (default: yes) + check for liburiparser or libcurl for URL normalization + ADD. if reading via NNTP Message-ID 'L'ookup in group-, thread- and + page level now try to find the ID via NNTP if the ID is not in + the current group + ADD. adjust IPv6 part of URL_REGEX + ADD. do not check for libgsasl but zlib if not using NNTP + ADD. move setlocale in write_overview() out of the loop + ADD. reject invalid undeclared_charset in attributes + ADD. if cache_overview_files is set, keep raw Subject and From + data so the cache is build with the original data instead + of trying recompile it from our preprocessed data. + ADD. hash Path in overview-data + ADD. Xref- and Path-filter to filter-menu + ADD. ToggleInfoLastLine ('i') to OptionMenu ('M') + ADD. ConnectionInfo ('J') to OptionMenu ('M') and PageViewAttach ('V') + ADD. configure check for getsockopt(), setsockopt(), posix_close(), + realpath(), lstat(), strptime(), sig_atomic_t, volatile + ADD. set TCP_USER_TIMEOUT or TCP_CONNECTIONTIMEOUT and + TCP_RXT_CONNDROPTIME if available + ADD. use truncate/append for .oldnewsrc (debian bug #151113) + ADD. detect "begin-encoded" as start of an uuencoded file with + a base64 encoed filename. + ADD. hide_inline_data (was hide_uue) now also can hide (partial) yenc, + inline pgp and shar + ADD. crc32()-fallback from Gary S. Brown + ADD. hideline_regex tinrc/'M'enu option similar to trn4 $HIDELINE + ADD. merge is_art_tex_encoded() into process_text_body_part() + ADD. ALPN with TLS (RFC 7301) + ADD. add_cmd_line_opts and disabled_nntp_cmds to serverrc, the later + must be used to replace the now dropped --disable-xhdr-xref and + --enable-broken-listgroup-fix configure options + ADD. cache_overview_files and compress_overview_files to serverrc + ADD. nntp_pipeline_limit to serverrc (DISABLE_PIPELINING replacement) + ADD. keep_expired_filters to keep expired rules (debian bug #1109039) + ADD. -n cmd.line.grp now also allows to specify a group not present in + newsrc yet (same for -nw) + ADD. 'g'oto group now works with -n even if group is not present in + newsrc + ADD. -L/'L'ookup Message-ID now works with -n even if Message-ID is in + a group not present in newsrc. + ADD. 'S'ubscribe pattern with -n may now work for groups not in newsrc + yet (local spool with active file and/or RFC 3977 server only) + ADD. config.guess, config.sub update + ADD. lower 8bit check for Newsgroups, Followup-To and Distribution + from error to warning + ADD. prefer Xref- over Newsgroups-header if performing Message-ID + lookups via NNTP + ADD. lookup "DISTRIB.PATS" and use as default for Distribution + ADD. lookup "DISTRIBUTIONS" descriptions and display if available + ADD. evaluate To/Cc/Bcc in mailing_list-groups (debian bug #250317) + ADD. cache connectioninfo and help pages during session once created + ADD. show group-flag on check article page + ADD. warn about moderated groups on check article page + ADD. print expected file versions with -vvV + ADD. MarkAncientArtRead ('^E') to mark old articles as read in select- + and group-level + ADD. improve -u performance + BUG. do not validated news_regex URIs with libcurl/liburiparser + BUG. in NO_LOCALE config get_author() could write outside the + allocated screen-memory + BUG. positive getart_limit had several bugs + BUG. -F was not mentioned in -h + BUG. mixed up error-messages + BUG. missing checks for empty string in From + BUG. possible memleaks + BUG. "posting" to mailgroups (mailing_list=) wasn't allowed if the + group had one of the [jnx]-flags, and the moderated warning + was given if it had the m-flag. + BUG. double-free group-name on a 502 response to GROUP + REM. ISO2ASC=6 (CP437) table + REM. configure check for atoi() + FIX. active.c, art.c, attrib.c, auth.c, charset.c, config.c, cook.c + crc32.c, debug.c, feed.c, filter.c, getline.c, group.c, header.c + help.c, init.c, keymap.c, lang.c, mail.c, main.c, makecfg.c + memory.c, misc.c, newsrc.c, nntplib.c, nntps.c, nrctbl.c + options_menu.c, page.c, pgp.c, post.c, prompt.c, regex.c, rfc1524.c + rfc2045.c, rfc2047.c, save.c, screen.c, search.c, select.c, signal.c + string.c, tags.c, thread.c, xref.c, extern.h, keymap.h, nntplib.h + policy.h, proto.h, rfc2046.h, tin.h, tinrc.h, parsdate.y + autoconf.h[in], tincfg.tbl, Makefile[.in], configure[.in] + config.guess, config.sub, tin.[15] + + 025) Toomas Soome + ADD. updated Estonian translation + FIX. et.po + -- 2.6.4 release 20241224 "Helmsdale" -- 024) Bjarni Ingi Gislason diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/CHANGES.old tin-2.6.5/doc/CHANGES.old --- tin-2.6.4/doc/CHANGES.old 2023-10-29 23:26:02.000000000 +0100 +++ tin-2.6.5/doc/CHANGES.old 2025-07-21 15:32:40.291972160 +0200 @@ -2775,7 +2775,7 @@ U089) Urs Janssen ADD. prefer inews_prog over INEWSDIR/inews -h REM. --enable-mmdf-mailer, HAVE_MBOXRD, save_to_mmdf_mailbox REM. check for OK_NOIHAVE, OK_NOPOSTIHAVE responses to MODE READER, - they are no loner mentioned in the draft + they are no longer mentioned in the draft BUG. p'^O'st postponed articles didn't respect attributes BUG. $EDITOR had higher priority as $VISUAL (introduced in 006; never trust your local guru!) diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/CREDITS tin-2.6.5/doc/CREDITS --- tin-2.6.4/doc/CREDITS 2024-12-17 17:50:52.000000000 +0100 +++ tin-2.6.5/doc/CREDITS 2025-10-30 08:51:31.150287203 +0100 @@ -1,74 +1,81 @@ I wish to thank the following people for supplying patches: -David Abbott, Earle Ake, Deniz Akkus, Russ Allbery, Matt Anton, Orbby S. Arka, -Stefan Assmann, Joachim Astel, Anton Aylward, Mark Ayzenshteyn, -Jens Chr. Bachem, Michael Baeuerle, George Baltz, Dieter Baron, -Volker Barthelmann, Kirk Bauer, Paul Bauwens, Dieter Becker, Wolfgang Behrens, -Fabrice Bellet, Greg Berigan, Enrik Berkhan, Juergen Bernau, Dan Berry, -Michael Bienia, David Binderman, Thomas Bliem, Andrey Blochintsev, Chris Blum, -Fokke de Boer, Henryk Bochmann, Andreas Borchert, Volker Borchert, -Sebastian Bork, Mark Boucher, Robert Brady, Peter Breitenlohner, -Jessica Brennan, Frederic Briere, Bill Brolik, Travis Brown, Herman ten Brugge, -Martin Buck, Matthias Buelow, Jeremy Buhler, Leila Burrell-Davis, Sean Casey, -Peter Castro, Troy Cauble, Wei-Lun Chao, Andrey A. Chernov, -Albert Chin-A-Young, Park Chong-Dae, Tan Kwee Chuan, Boleslaw Ciesielski, -Robert Claeson, Steven Cogswell, Don Costello, Joshua Crawford, Bryan Curnutt, -Ned Danieley, Lars Dannenberg, Chris Davies, John Davis, Borislav Deianov, -Thomas E. Dickey, Martin Dickopp, Olaf Dietrich, Herbert Martin Dietze, -Theo Van Dinter, Ralf Doeblitz, Bryan Dongray, Michael Douglass, -Nickolay Dudorov, Craig Durland, Bernd Eckenfels, Phil Edge, Kirk Edson, -Nick Efthymiou, Stefan Elf, Nigel Ellis, Andrei Emeltchenko, L. Scott Emmons, -Rob Engle, Olle Eriksson, Brent Ermlick, Bernd Ernesti, -Ragnar Hojland Espinosa, Jason Faultless, Michael Faurot, Werner Fleck, -John M. Flinchbaugh, Andy Gabor, Christian Garbs, Torsten Gesang, -Ruediger Geys, Callum Gibson, Bjarni Ingi Gislason, Mike Glendinning, -Igor Goryachev, Philippe Goujard, Dan Greenspan, Andrew Greer, -Dennis Grevenstein, Karlo Gross, Carl Hage, Piers Haken, Paul Halsema, -Joe Hansen, Ed Hanway, Scott Hauck, Christian Haul, James Hawtin, Philip Hazel, -Per Headland, Arnold Hendriks, Daniel Hermans, Jose Herrero, Dave Hill, -Tom Hite, Torsten Homeyer, Ulli Horlacher, Keith Howell, Tommy Hsieh, +David Abbott, Earle F. Ake, Deniz Akkus, Russ Allbery, Steve Alvey, Matt Anton, +Jack Applin, Orbby S. Arka, Stefan Assmann, Joachim Astel, Anton Aylward, +Mark Ayzenshteyn, Jens Chr. Bachem, Michael Baeuerle, George Baltz, +Dieter Baron, Volker Barthelmann, Kirk Bauer, Andreas Baumann, Paul Bauwens, +Steve Beaty, Dieter Becker, Wolfgang Behrens, Fabrice Bellet, Greg Berigan, +Enrik Berkhan, Juergen Bernau, Dan Berry, Michael Bienia, David Binderman, +Thomas Bliem, Andrey Blochintsev, Chris Blum, Fokke de Boer, Henryk Bochmann, +Andreas Borchert, Volker Borchert, Sebastian Bork, Mark Boucher, Robert Brady, +Peter Breitenlohner, Jessica Brennan, Frederic Briere, Bill Brolik, +Travis Brown, Herman ten Brugge, Jack Bryans, Martin Buck, Matthias Buelow, +Jeremy Buhler, Tilman Burmester, Leila Burrell-Davis, Brett Carver, Sean Casey, +Peter Castro, Troy Cauble, Wei-Lun Chao, Remus-Gabriel Chelu, +Andrey A. Chernov, Albert Chin-A-Young, Park Chong-Dae, Tan Kwee Chuan, +Boleslaw Ciesielski, Robert Claeson, Steven Cogswell, Don Costello, +Joshua Crawford, Bryan Curnutt, Ned Danieley, Lars Dannenberg, Chris Davies, +John Davis, Borislav Deianov, Thomas E. Dickey, Martin Dickopp, Olaf Dietrich, +Herbert Martin Dietze, Theo Van Dinter, Ralf Doeblitz, Bryan Dongray, +Michael Douglass, Nickolay Dudorov, Craig Durland, Bernd Eckenfels, Phil Edge, +Kirk Edson, Phil Edwards, Nick Efthymiou, Stefan Elf, Nigel Ellis, +Andrei Emeltchenko, L. Scott Emmons, Rob Engle, Olle Eriksson, Brent Ermlick, +Bernd Ernesti, Ragnar Hojland Espinosa, Jason Faultless, Michael Faurot, +Werner Fleck, John M. Flinchbaugh, Bill Frolik, Andy Gabor, Christian Garbs, +Jeff M. Garzik, Torsten Gesang, Helmut Geyer, Ruediger Geys, Callum Gibson, +Bjarni Ingi Gislason, Mike Glendinning, Igor Goryachev, Philippe Goujard, +Dan Greenspan, Andrew Greer, Dennis Grevenstein, Karlo Gross, Carl Hage, +Bruce Hague, Bruno Haible, Piers Haken, Paul Halsema, Joe Hansen, Ed Hanway, +Scott Hauck, Christian Haul, James Hawtin, Philip Hazel, Per Headland, +Arnold Hendriks, Daniel Hermans, Jose Herrero, Dave Hill, Tom Hite, +Torsten Homeyer, Mike Holmes, Ulli Horlacher, Keith Howell, Tommy Hsieh, Shih-Kun Huang, Steve Hunt, Jeff Hurwitt, Jeon Hyoung-Jo, Ali Ibraimi, Pieter Immelman, Jarkko Isokungas, Marco d'Itri, Patrick St. Jean, Hal Jespersen, Park Sang Jin, Robbin Johnson, Jarkko Jormanainen, Yury July, Nelson Kading, Geoffrey Keating, Karsten Keil, Charles S. Kerr, Fritz Kleeman, Andreas Kies, Janne Kiviluoto, Tomasz Kloczko, Dwarven Knight, Thomas Koenig, -Karl-Koenig Koenigsson, Sebnem Korkmaz, Martin Kraemer, Gerald Krause, -Thomas Kroener, Piotr Kucharski, Florian Kuehnert, Bernd Kuemmerlen, -Kris Kugel, Stephan Kulow, Manoj Kumar, Dawid Kuroczko, Yuri Kuzmenko, -Olivier Lacroix, Geoff Lane, Alex Lange, Alain Lasserre, Stanislav Latishko, -Hannu Laurila, Yen-Ming Lee, Vincent Lefevre, Alexander Lehmann, Marty Leisner, -Thomas Leitner, Hakan Lennestal, Kevin Lentin, Chua Choon Leong, Chris Lewis, -Andreas Ley, David-Michael Lincke, Otto Lind, Brad Littlejohn, Richard Lloyd, +Karl-Koenig Koenigsson, Sebnem Korkmaz, Martin Kraemer, Paul Kramer, +Gerald Krause, Thomas Kroener, Piotr Kucharski, Florian Kuehnert, +Bernd Kuemmerlen, Kris Kugel, Markus Kuhn, Stephan Kulow, Manoj Kumar, +Dawid Kuroczko, Yuri Kuzmenko, Olivier Lacroix, Geoff Lane, Alex Lange, +Alain Lasserre, Stanislav Latishko, Hannu Laurila, Yen-Ming Lee, +Vincent Lefevre, Alexander Lehmann, Marty Leisner, Thomas Leitner, +Hakan Lennestal, Kevin Lentin, Chua Choon Leong, Chris Lewis, Andreas Ley, +David-Michael Lincke, Otto Lind, Brad Littlejohn, Richard Lloyd, Florian Lohoff, Reinhard Luebke, Clifford Luke, Michael Lupp, David MacKenzie, -Hugh Mahon, Giuseppe De Marco, Scott Marovich, Dmitri A. Martynoff, -Kazushi Marukawa, Timur Maryin, William McBrine, Geoff McCaughan, Owen Medd, -Philipp Mergenthaler, Andreas Metzler, Arkadiusz Miskiewicz, Soren Moller, -Bruce Momjian, Sergio Morales, Michael Morrell, Klaus Mueller, Mike Muise, -Udo Munk, Steven Michael Murphy, John R. Myers, Daniel Naber, Torsten Neumann, -Dirk Nimmich, James Nugen, Daniel Nylander, David E. O'Brien, Michael O'Reilly, -Oleg Ohotnikov, Ronald Orr, Julien Oster, Guido Ostkamp, Philip Paeps, -Jeb Palmer, Neil Parker, Joseph Parmelee, Tom Parry, Jim Patterson, -Sven Paulus, Walter Pelissero, Cameron Perkins, Colin Perkins, Eric Peterson, -Tim Pierce, Bill Poitras, Scott W. Powers, Wolfgang Prediger, Dennis Preiser, -Marc Prud'hommeaux, GianPiero Puccioni, Antonio Querubin, Thomas Quinot, -Stefan Rapp, Martin Reising, Kyle Rhorer, Ted Richards, Arnold D. Robbins, -Steve Robbins, Ollivier Robert, Branden Robinson, Jim Robinson, -Thomas Roessler, Erik van Roode, Meelis Roos, Stephen Roseman, +Steven J. Madsen, Hugh Mahon, Giuseppe De Marco, Scott Marovich, +Dmitri A. Martynoff, Kazushi Marukawa, Timur Maryin, William McBrine, +Geoff McCaughan, Owen Medd, Philipp Mergenthaler, Andreas Metzler, Harald Milz, +Arkadiusz Miskiewicz, Olaf Mittelstaedt, Soren Moller, Phil Molyneux, +Bruce Momjian, Sergio Morales, Michael Morrell, James Morris, Klaus Mueller, +Mike Muise, Udo Munk, Steven Michael Murphy, John R. Myers, Daniel Naber, +Torsten Neumann, Dirk Nimmich, James Nugen, Daniel Nylander, David E. O'Brien, +Michael O'Reilly, Oleg Ohotnikov, Ronald Orr, Julien Oster, Guido Ostkamp, +Philip Paeps, Jeb Palmer, Neil Parker, Joseph Parmelee, Tom Parry, +Jim Patterson, Sven Paulus, Walter Pelissero, Cameron Perkins, Colin Perkins, +Richard Perlman, Eric Peterson, Tim Pierce, Bill Potrais, Scott W. Powers, +Gerry Pratt, Wolfgang Prediger, Dennis Preiser, Marc Prud'hommeaux, +GianPiero Puccioni, Antonio Querubin, Thomas Quinot, Stefan Rapp, +Martin Reising, Kyle Rhorer, Ted Richards, Tim Rice, Prentiss Riddle, +Arnold D. Robbins, Steve Robbins, Ollivier Robert, Branden Robinson, +Jim Robinson, Thomas Roessler, Erik van Roode, Meelis Roos, Stephen Roseman, Roland Rosenfeld, Peter Van Rossem, Clifton Royston, Rado S., Juergen Salk, -Aleksey Salow, Rich Salz, Gary Sanders, Nickolay Saukh, John Sauter, -Christopher Sawtell, Holger Schif, Volker Schmidt, John Schmitz, +Aleksey Salow, Rich Salz, Gary Sanders, Malkani Sanjay, Nickolay Saukh, +John Sauter, Christopher Sawtell, Holger Schif, Volker Schmidt, John Schmitz, Torsten Schneider, Stefan Scholl, Rainer Scholz, Juergen Schroeder, -Larry Schwimmer, Randy Scott, Bart Sears, Karl-Olav Serrander, -Francisco Javier Serrador, Ozge Sevinc, Doug Sewell, Chung-chieh Shan, -Philip Shearer, Jungshik Shin, Sergey Shkonda, Andreas Siegert, -Andrey Simonenko, Mark Smith, Toomas Soome, Steve Spearman, Glenn Spell, -Helmut Springer, Cliff Stanford, Steve Starck, Jason Steiner, Ralf Stephan, -Michael Stenns, Helmrich Streitmatter, Hans Werner Strube, Dieter Stueken, -Ed Sznyter, Lech Szychowski, Dean Takemori, Darrell Tangman, Derek Terveer, -Carsten Theis, Julian Thompson, David Tiller, Andry Timonin, +Larry Schwimmer, Dave Schweisguth, Randy Scott, Bart Sears, +Karl-Olav Serrander, Francisco Javier Serrador, Ozge Sevinc, Doug Sewell, +Chung-chieh Shan, Philip Shearer, Jungshik Shin, Sergey Shkonda, +Andreas Siegert, Alan Silverstein, Andrey Simonenko, Mark Smith, Toomas Soome, +Steve Spearman, Glenn Spell, Helmut Springer, Cliff Stanford, Richard Stanton, +Steve Starck, Jason Steiner, Ralf W. Stephan, Michael Stenns, +Helmrich Streitmatter, Hans Werner Strube, Dieter Stueken, Ed Sznyter, +Lech Szychowski, Dean Takemori, Toomas Tamm, Darrell Tangman, Derek Terveer, +Carsten Theis, Alan Thew, Julian Thompson, David Tiller, Andry Timonin, Elmar W. Tischhauser, Mark Tomlin, Mark Tomlinson, Michael Traub, Martin Treusch von Buttlar, Mark Trumbull, Alex Vasylenko, Michael Velten, -Adri Verhoef, Paul Vickers, Corinna Vinschen, Mingye Wang, Oliver B. Warzecha, -Florian Weimer, Christian Weisgerber, Jason Wessel, Cary Whitney, Henrik Wist, -Greg Woods, Andreas Wrede, Lloyd Wright, Jens Wuepper, Herbert Xu, Billy Y., -Hideaki Yoshfuji, Nickolai Zeldovich, Zbigniew Zych +Adri Verhoef, Paul Vickers, Corinna Vinschen, Mark Walker, Mingye Wang, +Oliver B. Warzecha, Florian Weimer, Christian Weisgerber, Jason Wessel, +Cary Whitney, Henrik Wist, Greg Woods, Andreas Wrede, Lloyd Wright, +Jens Wuepper, Herbert Xu, Billy Y., Hideaki Yoshfuji, Nickolai Zeldovich, +Dan Zerkle, Zbigniew Zych diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/INSTALL tin-2.6.5/doc/INSTALL --- tin-2.6.4/doc/INSTALL 2024-12-04 06:16:26.000000000 +0100 +++ tin-2.6.5/doc/INSTALL 2025-08-04 13:05:41.642381922 +0200 @@ -20,7 +20,7 @@ The following configure options and defi --enable-8bit-keys --program-suffix --enable-append-pid --program-transform-name --disable-break-long-lines --with-coffee - --enable-broken-listgroup-fix --with-curses-dir + --with-curses-dir --enable-broken-system-fix --with-dbmalloc --enable-cancel-locks --with-canlock --with-defaults-dir @@ -50,11 +50,11 @@ The following configure options and defi --enable-prototypes --with-pgpk --enable-shell-escape --with-screen --enable-warnings --with-shell - --enable-xhdr-xref --with-spooldir - --exec-prefix - --mandir --with-socks - --with-socks5 + --with-spooldir + --exec-prefix --with-socks + --mandir --with-socks5 --with-trace + --with-url-normalization --with-zlib ENFORCE_RFC1034 HAVE_UUDEVIEW_H @@ -63,11 +63,13 @@ The following configure options and defi FORGERY PROFILE REQUIRE_BRACKETS_IN_DOMAIN_LITERAL SMALL_MEMORY_MACHINE HAVE_LIBUU REREAD_ACTIVE_FILE_SECS - HAVE_BROKEN_SSCANF DISABLE_PIPELINING + HAVE_BROKEN_SSCANF OPTIMIZE_JUST_STAR MATCH_TAR_PATTERN MIN_COLUMNS_ON_TERMINAL MIN_LINES_ON_TERMINAL MAXARTNUM REPRODUCIBLE_BUILD - + INLINE_DEBUG_MIME DEBUG_UCNV + DEBUG_ART FILE_MODE_BROKEN + BACKUP_FILE_EXT Not yet documented configure options and defines: ------------------------------------------------- @@ -78,11 +80,6 @@ Networking related DECNET - e.g. VMS, Ultrix, ... EXCELAN - e.g. VxWorks -TIN related: - BACKUP_FILE_EXT (see misc.c:invoke_editor()) - FILE_MODE_BROKEN NO_LOCKING - DEBUG_ART DEBUG_UCNV - System related: --datadir --localstatedir --includedir --oldincludedir @@ -276,16 +273,6 @@ when using libtls or gnutls. Defines the name of the default NNTP server that tin should connect to. Can be overridden by setting the environment variable NNTPSERVER. ---enable-broken-listgroup-fix (default: off) -Bypass a bug in some broken NNTPservers which need an extra GROUP command -before accepting a LISTGROUP command. This can be also used to bypass the -bug in some servers (i.e. DeleGate, SurgeNews) where LISTGROUP doesn't -select the group and thus subsequent cmds. fail. - ---enable-xhdr-xref (default: on) -If disabled, don't allow using XHDR XREF if XOVER doesn't work to mark -crossposted articles as read in all groups. - The following options determine which locking method should be used when appending posted or postponed messages to mailbox-style files. Tin will try each method that can be configured, in succession. If none of your @@ -310,9 +297,6 @@ time they use tin. NNTP_SERVER_FILE (default: /etc/nntpserver) Only define if your NNTP-server file is other than /etc/nntpserver. -DISABLE_PIPELINING -Define if your newsserver can't handle pipelined commands. - --enable-long-article-numbers (default: off) Add code to handle huge (>2^31) article numbers, such article numbers violate the NNTP RFC and support for them may sensible increases tins memory usage. @@ -572,6 +556,11 @@ containing the include- and lib-director If you do not specify a PATH, the makefile will use the standard locations for this library. +--with-url-normalization[=[uriparser,curl] (default: yes) +Apply Syntax-Based Normalization (RFC 3986 6.2.2) to detected URLs +before passing them to url_handler. Requires --with-pkg-config and +either liburiparser or libcurl. + --enable-heapsort (default: on) Enable heapsort(3) as alternative to qsort(3). In large groups with a long retention and long threads this may be a performance win as the data in @@ -754,7 +743,26 @@ $CPPFLAGS and $LDFLAGS in the binary. Th reproducible builds. INLINE_DEBUG_MIME -experimental, if set show (some) MIME (parse) errors/info inline. +experimental, if set show (some) MIME or yenc (parse) errors/info inline. + +DEBUG_UCNV +additional debug messages for ucnv_*-functions (e.g. charset guessing), +requires DEBUG and is for development only. + +DEBUG_ART +additional debug messages for article decoding/cooking, for development only. + +FILE_MODE_BROKEN +define if st_mode of stat() is not reliable + +NO_LOCKING +define if (dot)locking should be skipped, should be used as a last resort +if none of the locking schemes fcntl, lockf or flock works. See also +--disable-fcntl, --enable-lockf and --enable-flock + +BACKUP_FILE_EXT +extension used for temporary backup files. set in misc.c:invoke_editor() +to ".b" License ------- diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/TODO tin-2.6.5/doc/TODO --- tin-2.6.4/doc/TODO 2024-12-22 19:56:49.000000000 +0100 +++ tin-2.6.5/doc/TODO 2025-12-18 20:03:07.819264646 +0100 @@ -15,7 +15,7 @@ o get_respcode() doesn't handle the 401 [20100429 Urs Janssen ] o col_response is a misnomer as the counter doesn't count responses - anymore (except on the very first article). The man-page is outdated too. + anymore (except on the very first article). The man page is outdated too. [20080826 Urs Janssen ] o unexpected multiline responses confuse tin, e.g.: @@ -25,7 +25,6 @@ o unexpected multiline responses confus [20050207 Urs Janssen ] o batch mode has several bugs - - -vc could be more verbose (like -vcZ is) - -o currently is not a 'batch_mode' option (it may ask questions) [Urs Janssen ] @@ -41,25 +40,17 @@ o add version number to other config-fi used (wildmat or regexp (or TRE)) [Urs Janssen ] -o overview file caching code is over-complex - - cache the original overview info instead of rebuilding it from - the processed (decoded etc.) data, no matter if it's broken (e.g. - contains raw 8 bit data) as we have to deal with that anyway. if there - are no original overviews, cache the original data from the postings - headers (after unfolding and tab removal). - - Add docs to explain how to create system-wide overviews +o Add docs to explain how to create system-wide overviews o iso2asc conversion is missing for 'internal' strings (e.g. 'M'enu) + (eg. via _()/P_() beening a wrapper abround *gettext() with additional + if (iso2asc_supported >= 0) process_charsets(..., FALSE)) [20020319 Urs Janssen ] o comments in attributes get lost (we need to do something like we do for the filter file) [20080425 Urs Janssen ] -o if falling back to HEAD/NEXT ([X]OVER not working) tinrc.getart_limit - isn't honored - [20090112 Urs Janssen ] - o the keys GroupToggleSubjDisplay / GROUP_TOGGLE_SUBJECT_DISPLAY and ThreadToggleSubjDisplay / THREAD_TOGGLE_SUBJECT_DISPLAY are misnamed, as they toggle the display of the sender address, not the subject. @@ -67,10 +58,13 @@ o the keys GroupToggleSubjDisplay / GRO o the key ToggleHelpDisplay / GLOBAL_TOGGLE_HELP_DISPLAY is misnamed (like txt_help_global_toggle_mini_help, but at least text now is - updated) wrong as it toggles tinrc.beginner_level which also controls + updated) as it toggles tinrc.beginner_level which also controls displaying the posting etiquette [20210106 Urs Janssen ] +o the literal IPv6 with embedded IPv4 addresses part in URL_REGEX is buggy + and does not catch all valid combinations + Pager Problems -------------- @@ -94,25 +88,26 @@ o mailers other than sendmail (f.e. mut New features ------------ -o add code for more TLS/SSL libraries (wolfSSL, mbed TLS, BearSSL, MatrixSSL, +o add code for more TLS/SSL libraries, e.g. + wolfSSL , + mbed TLS , BearSSL, MatrixSSL, axTLS, ...) o configure check for OpenSSL currently depends on pkg-config o with -T and an expired cert we could try to give more info then just - "certificate has expired" and then quitting, e.g. "was valid till ... " - or "not yet valid ..." with the corresponding dates (and the current + "certificate has expired" and then quitting, e.g. "was valid till ..." + or "not yet valid ..." with the corresponding dates (and the current date); with -k we could emphasise the fact on connect. + (done for 'J' ConnectionInfo-page) o with -T and hostname mismatch (OpenSSL: X509_V_ERR_HOSTNAME_MISMATCH) we could give more info than just "TLS handshake failed: hostname mismatch" (show CN (vs. used hostname)); with -k we could mention the mismatch on the 'J' ConnectionInfo-page. -o add configure check and code for libdeflate - (if zlib can't be found). - -o add possibility to dump the current key mapping to a file +o add possibility to dump the current key mapping to a file or even + add a keymap-menu to see and change the mapping from inside tin. o make the group status flag (moderated, new, bogus, ...) configurable like the thread and article flag (select.c:build_gline(%f)) @@ -126,12 +121,9 @@ o add configure check for cl_clear_secr o update included libcanlock to >= 3.3.1 [20211024 Urs Janssen ] -o allow per server cache_overview_files, compress_overview_files setting via - serverrc. - [20180215 Urs Janssen ] - -o if we extend serverrc it should also get some 'M'enu. - [20190205 Urs Janssen ] +o default_post_newsgroups, default_repost_group may hold groups not valid + on the current server, these are candidates to move to serverrc. + strip_newsrc may also be a candidate o implement SAVE_APPEND_FILE_ALL ('A') and SAVE_OVERWRITE_ALL ('O') keys which just ask once if file(s) already exist (open_save_filename()). @@ -147,8 +139,9 @@ o allow to cancel piping / saving multi current one [20160409 Urs Janssen ] -o add per scope getart_limit via attributes - [20131114 Urs Janssen ] +o add per scope render_bidi via attributes + +o add per scope hideline_regex via attributes e.g. to exclude *ascii-art o add support for %A (Address), %C (Firstname), %N (Fullname) to group_format and thread_format @@ -168,15 +161,16 @@ o add nntp_default_server to tin.defaul file, if it starts with $ it is read from the referenced variable. [20101118 Urs Janssen ] +o tin.defaults allows to preset mm_charset which will preset + mm_charset without charset conversion but mm_network_charset + if charset conversion is available. This is useful (and matches + $MM_CHARSET) but not emphasised in tin(5). + o the old space_goto_next_article=ON && space_goto_next_unread=OFF is not possible with the new goto_next_unread rc-var, we need something like an additional goto_next_read rc-var [20101101 Urs Janssen ] -o add DEFAULT_SIGDASHES_REGEX and related 'M'enu-entry for signature - detection in cook.c - [20080925 Urs Janssen ] - o allow remapping of the 'z' abort-key (lynx style) in wait_for_input(). o add more user defined screen layout at different levels (e.g. posting @@ -254,9 +248,8 @@ o add $LOCKEXT support o add xxencode (), base224 (), - base91 () and yenc (hide/decode-)support - (see for readable code, ignore - the crap on ). also check + base91 () and yenc decode-support + (see for readable code. also check which might replace yenc etc.pp. some day. [20020216 Urs Janssen ] @@ -323,18 +316,10 @@ o add cmd-line/tinrc-switch to fetch on [-G is a start] allow setting a per group limit via attributes -o check if server supports 'LIST MODERATORS' and/or 'LIST DISTRIB.PATS' and +o check if server supports 'LIST MODERATORS' and if it does parse the output so it can be shown to the user. (e.g. when posting to a moderated group, show the moderators mail-address, but still - leave the mailing to the server; if the group has limited distribution - inform the user, ...) - -o if using "-n" command-line switch you can't subscribe to newsgroups not - present in your newsrc - a simple check against the server - (e.g. GROUP $newsgroup or if !NNTP try to stat the dir) would help. - if the server understands "LIST ACTIVE grp" we could also get the group's - attribute (moderated, etc.) and with "LIST NEWSGROUPS grp" it's - description. + leave the mailing to the server) o item_by_item_etiquette_warnings [compile-time?] (e.g. enable x-posts without f'up warning, disable long-sig warning) @@ -356,12 +341,17 @@ o pgpverify invocation with a single ke o pgp-{6,7} support -o use runtime config for pgp instead of hardcoded values depending on - compile time detection, i.e. have tinrc vars for pgp_decode, pgp_verify, ... - like in mutt and/or +o use runtime config for pgp instead of hardcoded values depending on compile + time detection, i.e. have tinrc vars for pgp_decode, pgp_verify, ... + like in mutt (and use fork()/exec*() instead of system() where %F is + replaced (wordexp(3)-like (ulBuildArgv()-but quote aware)) with the + filename (and %U by the user); e.g. + pgp_verify=gpg --no-batch --verify %F + -> execlp("gpg", "gpg", "--no-batch", "--verify", artfile, NULL); + ) and/or -o add check for GPGME () and if - found use it for pgp actions. +o add check for GPGME () and + if found use it for pgp actions. o add feature Cc: @@ -374,6 +364,10 @@ o add new key which tags articles based GROUP_MARK_UNSELECTED_ARTICLES_READ) [20051110 Urs Janssen ] +o Additions to the page menu: + key to toggle hideline_regex on/off (e.g. '{' or '}') as toggle-raw + may not help to show original article (e.g. base64 encoded article). + o Additions to the thread menu: ']' (GLOBAL_QUICK_FILTER_KILL) '[' (GLOBAL_QUICK_FILTER_SELECT) @@ -398,6 +392,7 @@ o Additions to the group menu: 'V' (View/pipe/save multimedia attachments) 'Y' (check for new articles in group) '%' (toggle rot13 encoding of screen content) + key to search in (raw) article headers (and body). o Additions to the select menu: '%' (toggle rot13 encoding of screen content) @@ -417,7 +412,6 @@ o Add to the attachment menu ('V'): 'x' repost current attachment to another group '%' (toggle rot13 encoding of screen content) 'M' (GLOBAL_OPTION_MENU) - 'J' (GLOBAL_CONNECTION_INFO) '&' (GLOBAL_TOGGLE_COLOR) 'I' (GLOBAL_TOGGLE_INVERSE_VIDEO) '\'' (PAGE_ARTICLE_INFO) (the key would then be miss-named, but 'V' @@ -431,6 +425,9 @@ o Add to the URL Menu ('U'): 'M' (GLOBAL_OPTION_MENU) 'J' (GLOBAL_CONNECTION_INFO) +o Add to the Options Menu ('M'): + 'I' (GLOBAL_TOGGLE_INVERSE_VIDEO) + o integrate multi-part tagging with regular tagging, eg. "This article appears to have multi-parts, try and find them (y/n)?" @@ -467,6 +464,7 @@ o add check for liblzma/libbzip2/zlib ( , , , , + , ) and add an option to write/read compressed local overviews (done for zlib). the libs might also be used for post-processing articles. @@ -482,6 +480,7 @@ o rewrite/cleanup all the debugging cod [Urs Janssen ] o Add 'M'enu option to define chars for utf8_graphics. + (and rename option to unicode_graphics or the like) o allow user defined mouse button bindings (like keymap). @@ -525,28 +524,28 @@ o posting to a binary group should warn o when posting to a group containing uppercase-letters: bring up a warning: "Newsgroup-names should be all lowercase, correct it? (Y/n)" -o Enhance -n to take newsgroup name as argument and use group_get_art_info() - to allow posting to groups other than those in newsrc. - o add config option for (external) viewer to show postings stored in - keep_posted_articles_file + posted_articles_file [20021003 Michael Gerhards ] Filtering enhancements ---------------------- -o add Xref + Path filter to the filter-menu - o add used filter-type to filter file or filter rule or use different - filter files for wildmat/regexp - -o add command: mark all articles older/newer than (or ) as - read (useful when subscribing to a new group with high-traffic...) + filter files for wildmat/regexp; or at least check the filter file + before usage and inform the user if its format seems not to match + the wildcard-tinrc entry, e.g. read the filter-file (count the + rules and if any ignore everything but the lines which take a regexp + or wildmat (subj|from|msgid(?:|_last|_only)|refs_only|xref|path) and + try to compile_regex() it - if there are errors like + PCRE2_ERROR_QUANTIFIER_INVALID warn the user if wildcard-tinrc is + regexp ("looks like a wildmat filter file, but ... q)uit r)rename ...). o fix kill/hot mechanism so that it is possible to match articles on arbitrary headers [done for Path, Dennis] o don't strip "Re: " out of the subject before applying the filter on it + (note: we now have the raw subject in subject_raw) o allow any given amount of days in default_filter_days not only {1, 2, 4} * 28 days @@ -584,8 +583,8 @@ o add missing mailcap (RFC 1524) featur o add BiDi handling to page header -o add trn like $HIDELINE tinrc-option to skip lines matching the given - regex when displaying (pipeing, printing, saving or quoting) an article. +o possibility to recook the article with a manually supplied charset + (e.g. to override a false guess or the like) Internal Changes ---------------- @@ -593,9 +592,9 @@ o check remaining fopen(..., "r") calls tin_fopen() to get some default error-handling and if not put a comment to them. -o in ENABLE_NLS case replace PLURAL() macro with proper use of - ngettext(3) (if found by configure) to support languages with - more than one plural form. +o add configure check for (missing) ngettext(3) (see P_()/NP_() in tin.h). + fix the "untranslatable" strings and use full sentences instead. + (grep for "plural-forms") [20150113 Urs Janssen ] o rename disable_gnksa_domain_check to enable_gnksa_domain_check and @@ -625,10 +624,6 @@ o rewrite auth.c - it is overcomplex and the current codeflow has issues (e.g. prompts for user/pass if not in newsauth even for e.g. SASL ANONYMOUS). - sasl-libs likely have callbacks, make use of them! - - add config option (per server?) to force the use of SASL or USER/PASS - only (or disallow SASL (mech list?) or USER/PASS): - - I saw at least one bigger server which announced SASL (compiled in) - but did not support it (intentional lacking local config!). o fix aclocal.m4:CF_FUNC_SYSTEM and/or misc.c:invoke_cmd() that --enable-broken-system-fix/IGNORE_SYSTEM_STATUS isn't needed anymore. @@ -640,8 +635,8 @@ o move several (server related) files i ${TIN_INDEX_NEWSDIR-"${TIN_HOMEDIR-"$HOME"}/.tin"}${NNTPSERVER+"/$NNTPSERVER"}/.news/ [20050807 Urs Janssen ] -o remove untranslatable constructs like txt_prefix_*, txt_marked_as_*, - txt_reading_*, ... +o remove untranslatable constructs like txt_saved_to, txt_saved_to_range, + txt_mark_arts_read, txt_mark_art_read, ... [20050413 Urs Janssen ] o keys which could be renamed/merged: @@ -660,13 +655,10 @@ o read_overview() calls eat_re() which which might not be what ppl. expect and eat_re() is the only function which needs the 'regex' overhead in batch_mode... (see also the note about "Re: "-stripping at "Filtering enhancements"). + note: we now have article->subject_raw (no re-stripping, but also no + mime-decoding!), which we may use instead (after mime-decoding). [20050225 Urs Janssen ] -o use new_nntp_command() instead of nntp_command() in the rest of the - code (where useful; if we do a global change, rename it to - nntp_command()). see check_extensions() for a sample usage. - [20050211 Urs Janssen ] - o replace various occurrence of "US-ASCII" by DEFAULT(_MIME)_CHARSET and define that to "US-ASCII" (to make 'updates' easier). See also RFC 6657 and e.g. RFC 7111 (text/cvs now defaults to UTF-8). @@ -703,14 +695,15 @@ o check where iKeyAbort should be used [Urs Janssen ] o close potential security holes: - - remove fixed length buffers (find_nov_file(), print_from(), - quote_space_to_dash(), escape_shell_meta(), - build_messageid(), get_secret(), get_host_name(), get_domain_name(), - get_fqdn(), get_user_name(), get_full_name(), build_sender(), ...) + - remove fixed length buffers (find_nov_file(), quote_space_to_dash(), + escape_shell_meta(), build_messageid(), get_secret(), get_host_name(), + get_domain_name(), get_fqdn(), get_full_name(), build_sender(), ...) - change all system()/popen() calls to fork() and exec() calls - check where we should use snprintf() instead of sprintf() - - check where we should use strncat() instead of strcat() - - check where we should use strncpy() instead of strcpy() + - check where we should use strncat() (or append_to_string()) instead of + strcat() + - check where we should use strscpy() (configure check needed) or + strncpy() instead of strcpy() - check possible races with access()/link()/rename()/stat()/ unlink()/chdir()/fopen()/fstat()/open()/ opendir()/t_open() @@ -736,6 +729,7 @@ o check code with clang-analyzer (), infer () Splint (LCLint) , + IKOS , zzuf () and aflnet () @@ -748,9 +742,6 @@ o rewrite code to use INEWS_PATH instea o remove built in path of external commands (metamail, ispell, ...) [for ispell $ISPELL can be used to override systempath and progname] -o add configure-switch for DISABLE_PIPELINING - [20090612 Urs Janssen ] - o mask inline pgp signature/key block like we do for uu-sections [20090722 Urs Janssen ] @@ -770,6 +761,8 @@ o as rename_file() and copy_fp() now re o without %G and %P expansion, we could read mailcaps only once and keep the config in memory +o tin.h MIME_ENCODING_* and rfc2046.h ENCODING_* are not aligned + Unicode ------- o make mm_network_charset an "option_list" to avoid junk input or @@ -817,11 +810,18 @@ o check for wcsftime() and if found use least in page.c). [20130129 Urs Janssen ] -o BiDi handling to select-, group-, thread-level +o BiDi handling to select-, group-, thread-level (ui-layout expects + left-to-right text). o check for rpmatch(3) and if found use in yes/no questions, prompt.c:prompt_yn()? +o check for libunibreak + and make use of it if found? (tinrc.dont_break_words) + +o check for libgrapheme + and if found use it for char/word-segmentation? + Docs/online help ---------------- o document the difference between @@ -843,8 +843,7 @@ o the online help of GroupMarkUnselArtR o document the different signals/actions [20080209 Urs Janssen ] -o review the Spanish, Swedish and Russian translations - (es.po, sv.po, ru.po); add/finish missing man-page translation(s). +o review the unfinished (man page) translations o add installation guide (in html?) @@ -876,18 +875,29 @@ o the limited pgp support (inline pgp a verification or key import but no decryption ...) is nearly undocumented in the man page +o document that -G overrides getart_limit in tinrc but not in attributes + +o document the limits of -G / getart_limit (INT_MIN, INT_MAX) + Not yet classified ------------------ -o configure check for volatile sig_atomic_t and if found use in - signal_handler to flag actions to be done; check the flag outside +o add. cmd-line option to override/(ignore) the default serverrc? + +o "-w group,list" uses only the first group found in the servers active + file to post to + +o tinrc.info_in_last_line has no 'M'enu entry (but a toggle-key at most + levels: GLOBAL_TOGGLE_INFO_LAST_LINE) + +o flag actions in signal_handler to be done; check the flag outside the signal_handler (where? handle_keypad()?) and do the outstanding actions there, like: enum sactions {nothing, write_newsrc, tin_done, ...} - volatile sig_atomic_t pending_saction = nothing; + volatile sig_atomic_t pending_sactions = nothing; /* ... */ case SIGUSR2: - pending_saction = write_newsrc; - (could fix our SIGUSR2 and SIGTERM issue). + pending_sactions = write_newsrc; + (could fix our SIGUSR2 and SIGTERM issue; see SIGWINCH/prompt_list()). o add tinrc option to disable charset guessing for group-descriptions and MOTD. @@ -917,19 +927,20 @@ o verbatim regions can't be nested, sho o allow per group cancel_lock_algo setting via attributes? [20170810 Urs Janssen ] -o allow per group cache_overview_files, compress_overview_files setting - via attributes? - [20180215 Urs Janssen ] - o exit HEAD/NEXT loop on 5xx responses to HEAD? (see art.c:open_art_header()) [20161011 Urs Janssen ] o motd is only shown/checked for if using nntp, subscriptions is also - evaluated if reading from local spool - look for motd[.nnrpd|.innd] in - the same dir if not using nntp? + evaluated if reading from local spool - look for motd[.nnrpd|.news[|.innd]] + in the same dir if not using nntp? -o follow $LC_COLLATE (e.g. add strxfrm() to subj_comp_*/from_comp_*)? +o if reading from local spool, groups which are present in the active + but all articles are exired (and thus the group-dir got removed from + the spool) are shown as bogus ('D'). + +o follow $LC_COLLATE (e.g. add strxfrm()/wcsxfrm()/strcoll()/wcscoll() to + subj_comp_*/from_comp_*)? [20160421 Urs Janssen ] o IDNA decode news_headers_to_display? @@ -1048,9 +1059,14 @@ o add PGP_INCLUDE_KEY to pgp_mail_keys? [20050426 Urs Janssen ] o trn and perls Net::NNTP::Auth use ~/.nntpauth (format is - "^server\s+user\s+password"), shall we also try ~/.nntpauth if we can't - find a matching entry in ~/.newsauth? and should we look for + /^$server\s+$user\s+$password/), shall we also try ~/.nntpauth if we + can't find a matching entry in ~/.newsauth? and should we look for ${TIN_HOMEDIR:-"$HOME"}/.tin/.newsauth if ~/.newsauth is not found? + What about ~/.authinfo (Gnus; format is .netrc-like: + /machine\s+$server\s+ login\s+$user\s+ (?:password\s+$password\s+)? + (?:\s+port\s+$port\s+)?(?:force\s+yes\s+)?/x + see ; + and note the default-token)? [20040128 Urs Janssen ] o what todo if in a CTE: x-uue the CD: filename differs from the one given @@ -1093,6 +1109,9 @@ o configure checks for fdopen(3) and de don't have any code guarded with that macro nor any fallback code if not found. +o add check for libmagic and if + found use it to verify given mime-types in attachments + o add check for libarchive and use for post-processing? [20111225 Urs Janssen ] @@ -1106,6 +1125,9 @@ o add check for libtre and offer TRE as , [20130706 Urs Janssen ] +o add check for libenca + as fallback if not USE_ICU_UCSDET? + o eval $NEWSHOST if $NNTPSERVER is unset (like Net::NNTP(3perl)) [20141225 Urs Janssen ] @@ -1118,3 +1140,23 @@ o option to {display,warn,hide} article o also check for $NEWS_ORGANIZATION (see lynx(1))? o add $MAILCHECK alarm-timer? + +o add configure check for nanosleep(2) and prefer over usleep(3) + (curses.c:input_pending())? + +o in case of HAVE_LIB_PCRE2 && HAVE_SETLOCALE && !NO_LOCALE && ENABLE_NLS + (and $LC_CTYPE != C/POSIX[.UTF-8]) do we want to (see pcre2api(3)): + pcretables = pcre2_maketables_8(NULL); + pcreccontext = pcre2_compile_context_create_8(NULL); + pcre2_set_character_tables_8(pcreccontext, pcretables); + pcre2_compile(..., pcreccontext); + pcre2_maketables_free(pcretables); + and add PCRE2_UCP options? Do we want do set PCRE2_UCP unconditionally, + even though it slows down matching? + +o when saving/decoding articles/attachments use realpath() and + warn if the canonical absolute path starts with any of + { "/boot/", "/dev/", "/etc/", "/proc/", "/root/", "/sbin/", + "/sys/", "/usr/sbin/" /*, ... */ } + +o should NNTP_SERVER_FILE be changeable via configure? diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/WHATSNEW tin-2.6.5/doc/WHATSNEW --- tin-2.6.4/doc/WHATSNEW 2024-12-21 15:29:04.000000000 +0100 +++ tin-2.6.5/doc/WHATSNEW 2025-07-30 13:49:11.480556322 +0200 @@ -5,6 +5,7 @@ New features - pcre2 support (configure --with-pcre2-config[=PATH] vs. --with-pcre[=PATH]) - NNTPS support based on libressl/gnuttls/OpenSSL (RFC 8143) + with ALPN (RFC 7301) (configure --with-nntps[=[libtls|openssl|gnutls]]) - "COMPRESS DEFLATE" support (RFC 8054) - compress_overview_files option @@ -14,19 +15,26 @@ New features suppress_soft_hyphens - ConnectionInfo page ('J') incl. TLS connection info and MOTD - ArticleInfo page ('\'') for MIME-debugging +- PageToggleVerbatim (,) - ${TIN_HOMEDIR:-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/msglog - -t timeout cmd.-line option - -L cmd.-line option - -F filter-file cmd.-line option +- -n cmd.line.grp now also allows to specify a group not present in + newsrc yet (same for -nw) +- 'g'oto group with -n works for group not in newsrc yet +- 'S'ubscribe pattern with -n may now work for groups not in newsrc yet + (local spool with active file and/or RFC 3977 server only) - :port suffix in newsauth, newsrctable and -g - -[zZMN] now note unsubscribed cmd-line groups - cmd. execution via ! for x_body - mime encode and fold long header-lines (> 998 octets) if !post_8bit_header - post f'up from thread-level ('f' and 'F') - configurable display format of attachments - (page_mime_format, page_uue_format, attachment_format) + (page_mime_format, page_uue_format, page_yenc_format, attachment_format) - new option show_art_score (with col_score_neg, col_score_pos) - new option dont_break_words +- new option hideline_regex - ranges can be undone - REPRODUCIBLE_BUILD define to prevent recoding of __DATE__, __TIME__, $CFLAGS, $CPPFLAGS and $LDFLAGS in the binary @@ -42,10 +50,18 @@ New features - allow argument names for -D (case insensitive, comma separated list, can be mix with numeric values) - URI syntax-check and normalization it with uriNormalizeSyntaxA() if - liburiparser was found + liburiparser or libcurl was found - $LC_NUMERIC for RADIXCHAR (used when showing attachment sizes) - allow hex-numbers for cmd.-line switches which take numeric args - +- hide_inline_data (was hide_uue) now also hides yenc encoded parts + (hide only, no decoding support yet), inline pgp and/or shar +- hide_inline_data can be set per scope via attributes +- add_cmd_line_opts and disabled_nntp_cmds in serverrc +- cache_overview_files and compress_overview_files in serverrc +- keep_expired_filters to keep expired filter rules +- serverrc-menu via ConfigServerrcMenu ('s') +- get distributions from "LIST DISTRIB.PATS" and descriptions from + "LIST DISTRIBUTIONS" if available Changes ------- @@ -61,6 +77,14 @@ Changes instead of $TMPDIR - valid IPv6-addresses in brackets are now allowed in gnksa-filters - allow ccTLD .ss, disallow ccTLD .an and .tp +- if reading via NNTP Message-ID 'L'ookup in group-, thread- and page level + now try to find the ID via NNTP if the ID is not in the current group +- verbatim_handling (tinrc/attributes) has changed from ON/OFF value to NUM + value with more options +- hide_uue (tinrc) has been renamed to hide_inline_data and is now also + available in attributes +- lower 8bit check for Newsgroups, Followup-To and Distribution + from error to warning Retired Features ---------------- @@ -68,3 +92,7 @@ Retired Features - --with-sum specifying the sum of uue-file got more and more uncommon at the end of last century and uue mostly vanished later on ... - no longer expands %G and/or %P in $MAILCAPS +- no longer allow ISO2ASC=6 (CP437 table) as that was the only non + to ASCII conversion and should be done with iconv() +- --enable-broken-listgroup-fix (disable LISTGROUP via serverrc instead) +- --disable-xhdr-xref (disable XHDR via serverrc instead) diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/config-anomalies tin-2.6.5/doc/config-anomalies --- tin-2.6.4/doc/config-anomalies 2024-08-24 14:37:20.000000000 +0200 +++ tin-2.6.5/doc/config-anomalies 2025-11-28 14:23:57.562557771 +0100 @@ -37,7 +37,6 @@ tinrc variables that should be removed b attributes file with scope=*: savedir -auto_save mark_saved_read post_process_type post_process_view @@ -72,13 +71,13 @@ quote_regex3 * strip_re_regex * strip_was_regex * show_signatures -hide_uue * +hide_inline_data news_quote_format mail_quote_format * xpost_quote_format * auto_cc_bcc default_filter_days * -getart_limit * +getart_limit recent_time * mail_address from in attributes; should be split into username and address diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/keymap.sample tin-2.6.5/doc/keymap.sample --- tin-2.6.4/doc/keymap.sample 2024-07-06 18:55:48.000000000 +0200 +++ tin-2.6.5/doc/keymap.sample 2025-11-06 14:53:23.977155051 +0100 @@ -51,6 +51,7 @@ MenuFilterSelect ^A MenuFilterKill ^K MarkFeedRead ^X MarkFeedUnread ^W +MarkAncientArtRead ^E ##### @@ -69,6 +70,7 @@ ConfigSelect ^J ^M ConfigLastPage G ConfigNoSave Q ConfigScopeMenu S +ConfigServerrcMenu s ConfigFirstPage g ConfigResetAttrib r @@ -136,7 +138,8 @@ PageToggleTabs ^T PageFollowupQuoteHeaders ^W PageToggleTex2iso " PageToggleRot % -PageToggleUue ( +PageToggleVerbatim , +PageToggleInlineData ( PageReveal ) PageToggleAllHeaders * PageArticleInfo ' diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/l10n/de/tin.1 tin-2.6.5/doc/l10n/de/tin.1 --- tin-2.6.4/doc/l10n/de/tin.1 2024-12-23 10:57:25.000000000 +0100 +++ tin-2.6.5/doc/l10n/de/tin.1 1970-01-01 01:00:00.000000000 +0100 @@ -1,4120 +0,0 @@ -.\" -.\" Project : tin - a Usenet newsreader -.\" Module : tin.1 -.\" Author : I. Lea, U. Janssen -.\" Created : 1991-08-23 -.\" Updated : 2024-12-24 -.\" Notes : use American English; still needs some work, e.g.: -.\" - document authorization (.newsauth) -.\" - document random organization feature -.\" -.\"******************************************************************* -.\" -.\" This file was generated with po4a. Translate the source file. -.\" -.\"******************************************************************* -.TH tin 1 "24 Dezember 2024" 2.6.4 "Usenet Newsreader" -.\" -.\" -.SH NAME -.\" -.\" -tin, rtin \- Usenet Newsreader -.SH ÜBERSICHT -.\" -.\" -\fBtin\fP [\|[\|\fB\-h\fP\||\|\fB\-H\fP\||\|\fB\-V\fP\|]\ \|| [\|[\|\fB\-a\fP\|] -[\|\fB\-dlnq\fP\||\|\fB\-Q\fP\|] [\|\fB\-ACkrTzxX\fP\|]\|] [\|[\|\fB\-R\fP\||\|\fB\-S\fP\|] -\|\|\fB\-s\fP \fINews\-Verz.\fP\|] [\|\fB\-cuvZ\fP\|] [\|\fB\-4\fP\||\|\fB\-6\fP\|] -[\|\fB\-o\fP\||\|\fB\-w\fP\||\|\fB\-N\fP\||\|\fB\-M\fP \fIAdresse\fP\|] [\|\fB\-D\fP -\fIDebuggrad\fP\|] [\|\fB\-F\fP \fIFilter\-Datei\fP\|] [\|\fB\-G\fP \fIArtikellimit\fP\|] -[\|\fB\-f\fP \fInewsrc\-Datei\fP\|] [\|\fB\-g\fP \fIServer\fP\|[\|:\fIPort\fP\|]\|] [\|\fB\-L\fP -\fIMessage\-ID\fP\|] [\|\fB\-m\fP \fIMail\-Verz.\fP\|] [\|\fB\-p\fP \fIPort\fP\|] [\|\fB\-t\fP -\fITimeout\fP\|] [\|\fB\-I\fP \fIindex\-Verz.\fP\|]\ \|[\fINewsgruppe\fP\|[\|,.\|.\|.\|]\|]\|] -.SH BESCHREIBUNG -\fBtin\fP ist ein einfach zu bedienender Newsreader für das Usenet. Er kann -Artikel von einem lokalen (z. B. aus \fI/var/spool/news\fP) oder entfernten -Server (\fBrtin\fP oder \fBtin \-r\fP Option) mittels NNTP (Network News Transport -Protocol, \fBRFC\%3977\fP) oder NNTPS (\fBRFC\%8143\fP) lesen. Er benutzt, sofern -vorhanden, lokale NOV \fB\%newsoverview\fP(5) Indexdateien bzw. den [X]OVER -NNTP\-Befehl (\fBRFC\%2980\fP, \fBRFC\%3977\fP). -.PP -\fBtin\fP hat vier unterschiedliche Arbeitsebenen: Auswahlebene, Gruppenebene, -Threadebene und Artikelebene. Mit dem \fBHelp\fP ('\fBh\fP') Befehl können die -jeweils verfügbaren Befehle angezeigt werden. -.PP -Zu Beginn zeigt \fBtin\fP eine Liste der Gruppen in -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP. Ein Pfeil '\(->' oder ein inverser -Balken zeigt auf die erste Newsgruppe. Um zu einer Gruppe zu navigieren -können die Cursor\-Tasten (hängt vom verwendetem Terminal ab) oder \fBDown\fP -('\fBj\fP') und \fBUp\fP ('\fBk\fP') benutzt werden. Mit Bildrauf/Bildrunter (hängt -vom verwendetem Terminal ab) oder \fBPageUp\fP ('\fB^U\fP') (CTRL\-U) und -\fBPageDown\fP ('\fB^D\fP') (CTRL\-D) kann Seitenweise navigiert werden. Die -ausgewählte Gruppe wird durch Drücken von '\fB\fP' betreten. -.PP -.\" -.\" -Durch Drücken der \fBGroupNextUnreadArtOrGrp\fP ('\fB\fP') Taste wird -die nächste Newsgruppe mit ungelesenen Artikeln betreten. -.SH RÜCKGABEWERT -.\" TODO: also exits with signalnr caught as exit status -.TP 12 -\fB0\fP -Programm erfolgreich beendet. Im Batch\-Modus: keine ungelesenen Nachrichten -vorhanden. -.TP -\fB1\fP -Bedien\-, Syntax\-, Konfigurations\- oder Netzwerk\-Fehler. -.TP -\fB2\fP -Ungelesene Nachrichten vorhanden (nur im Batch\-Modus (\*(rq\fB\-Z\fP\*(rq)). -.TP -\fB3\fP -.\" -.\" -NNTP Fehler. -.SH OPTIONEN -.TP 12 -\fB\-4\fP -Verbindung via IPv4 zum NNTP Server erzwingen. Nur verfügbar, wenn \fBtin\fP -mit IPv6\-Unterstützung gebaut wurde. -.TP -\fB\-6\fP -Verbindung via IPv6 zum NNTP Server erzwingen. Nur verfügbar, wenn \fBtin\fP -mit IPv6\-Unterstützung gebaut wurde. -.TP -\fB\-a\fP -ANSI\-Farben ein/\-ausschalten (Voreinstellung ist aus). -.TP -\fB\-A\fP -Erzwinge Authentifikation beim Verbindungsaufbau. Nur verfügbar, wenn via -NNTP gelesen wird. -.TP -\fB\-c\fP -Erstelle bzw. aktualisiere Index\-Dateien für alle Gruppen in -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP bzw. der mittels \*(rq\fB\-f\fP\*(rq angegebenen -Datei und markiere alle Artikel als gelesen. -.TP -\fB\-C\fP -Die NNTP\-Erweiterung COMPRESS (\fBRFC\%8054\fP) verwenden, falls -verfügbar. Auch \fBnntp_read_timeout_secs\fP, '\fB\-t\fP\*(rq und die Abschnitte -"SICHERHEIT" und "FEHLER" beachten. -.TP -\fB\-d\fP -.\" -.\" FIXME: explain debug levels -Keine Gruppenbeschreibungen und die Server Meldung des Tages laden -(Interaktiver\-Modus). -.TP -\fB\-D\fP\fI Debuggrad\fP -Enter debug\-level, the levels can specified via number (should be avoided as -it will be removed in the future) or name (case insensitive) as listed -below. Use comma to give multiple levels, any combinations are allowed -(e.g., \*(rq\fB\-D\fP \fIGNKSA,2,NNTP\fP\*(rq). If removal is requested it will be -performed at startup and on normal termination (that is the files are only -available while tin is running). -.in +.3i -.nf -.ta \w'%128 'u +\w'ATTRIBUTES 'u +\w'ATTRIBUTES 'u +\w'ATTRIBUTES'u - \fI1 NNTP NNTPS\fP - \fI2 FILTER ARTS\fP - \fI4 NEWSRC BITMAP\fP - \fI8 THREADING REFS\fP - \fI16 MEMORY MALLOC\fP - \fI32 ATTRIBUTES\fP - \fI64 MISC GNKSA ACTIVE\fP -\fI127 ALL EVERYTHING\fP -\fI128 REMOVE DELETE\fP -.fi -.in -0.3i -Im NNTP\-Level steuert \*(rq\fB\-v\fP\*(rq die Ausführlichkeit der Ausgabe. Je nach -Debuggrad könnten verschiedene Dateien nach \fI$TMPDIR\fP geschrieben werden -und/oder eine Bildschirmausgabe erfolgen. Auch den Abschnitt "SICHERHEIT" -beachten! -.TP -\fB\-f\fP\fI Datei\fP -Benutze die angegebene newsrc\-Datei anstelle von -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP oder der Datei aus -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP. -.TP -\fB\-F\fP\fI Datei\fP -Angegebene Filter\-Datei anstelle von \fI${TIN_HOMEDIR:\-"$HOME"}/.filter\fP -verwenden. -.TP -\fB\-g\fP\fI Server\fP[\fB:\fP\fIPort\fP] -Zugehörigen Newsserver[:Port] und newsrc\-Datei aus -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP benutzen. Nur verfügbar, wenn -via NNTP gelesen wird.Wenn Sie einen Port mit einer direkten IPv6\-Adresse -angeben möchten, muss die Adresse in eckige Klammern gesetzt werden. -.TP -\fB\-G\fP\fI Artikellimit\fP -Beschränkt die Anzahl der Artikel pro Gruppe, die vom Server abgerufen -werden sollen. Wenn \fIarticle\-limit\fP > 0 ist, werden nicht mehr als die -letzten \fIarticle\-limit\fP Artikel pro Gruppe vom Server geholt. Wenn -\fIarticle\-limit\fP < 0 ist, beginnt \fBtin\fP mit dem Abruf von Artikeln ab -Ihrem ersten ungelesenen Artikel minus dem absoluten Wert von -\fIarticle\-limit\fP. Die Voreinstellung ist 0, was keine Begrenzung bedeutet. -.TP -\fB\-h\fP -Kurzübersicht der verfügbaren Kommandozeilenoptionen. -.TP -\fB\-H\fP -Kurzeinführung in \fBtin\fP welche auch beim allerersten Start ausgegeben wird. -.TP -\fB\-I\fP\fI Verzeichnis\fP -Verzeichnis in dem die Newsgroup\-Indexdateien gespeichert werden. Standard -ist \fI${TIN_INDEX_NEWSDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.news\fP. Diese -Option hat keine Auswirkung, falls \fBtin\fP seine Indexdateien über NNTP -abruft und \fBcache_overview_files\fP ausgeschaltet ist. -.TP -\fB\-k\fP -Zertifikatsüberprüfungsschritt für NNTPS\-Verbindungen überspringen und ohne -Überprüfung fort fahren. Diese Option beinhaltet \*(rq\fB\-T\fP\*(rq. Auch den -Abschnitt "SICHERHEIT" beachten. -.TP -\fB\-l\fP -Ruft die Anzahl der Artikel pro Gruppe aus der Datei -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP ab. Beim Lesen über -NNTP erfolgt dies mit dem LIST Befehl (\fBRFC\%3977\fP). Dies kann zu falschen -Artikelzahlen führen, ist aber normalerweise schneller als der Standard, der -darin besteht, die Datei -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP (entweder direkt -oder über LIST) zu Lesen und dann die Artikelanzahl über den Befehl NNTP -GROUP ((\fBRFC\%3977\fP) \*(rq\fB\-ln\fP\*(rq zu überprüfen. Wenn das Lesen über NNTP und -LIST COUNTS (\fBRFC\%6048\fP) verfügbar ist, wird dies stattdessen verwendet, -da es genauere Artikelzahlen liefert. -.TP -\fB\-L\fP -Zeigt die Nachricht mit der angegebenen Message\-ID an, falls diese verfügbar -ist. Nur verfügbar, wenn via NNTP gelesen wird. -.TP -\fB\-m\fP\fI Verzeichnis\fP -Zu benutzendes Mailbox\-Verzeichnis. Voreinstellung ist -\fI${TIN_HOMEDIR:\-"$HOME"}/Mail\fP. -.TP -\fB\-M\fP\fI Benutzer\fP -Sende ungelesene Artikel an den angegebenen Benutzer um sie später lesen zu -können. Für weitere Informationen siehe den Abschnitt "AUTOMATISCHES MAILEN -UND SPEICHERN VON UNGELESENEN ARTIKELN". -.TP -\fB\-n\fP -Nur die Gruppen aus der Datei -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP laden, die im -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP des Benutzers abonniert sind. Dies -ermöglicht eine spürbare Beschleunigung beim verbinden über eine langsame -Leitung, kann aber möglicherweise nicht erkennen, welche Gruppen moderiert -werden. Siehe auch \*(rq\fB\-l\fP\*(rq. -.TP -\fB\-N\fP -Sende ungelesene Artikel an dich selbst um sie später lesen zu können. Für -weitere Informationen siehe den Abschnitt "AUTOMATISCHES MAILEN UND -SPEICHERN VON UNGELESENEN ARTIKELN". -.TP -\fB\-o\fP -Schnell\-Modus um alle zurückgestellten Artikel zu posten und danach \fBtin\fP -wieder beenden. Nach Möglichkeit mit \*(rq\fB\-n\fP\*(rq kombinieren. -.TP -\fB\-p\fP\fI Port\fP -Zu benutzende Portnummer falls per NNTP gelesen wird (Voreinstellung ist 119 -oder 563 falls NNTPS benutzt wird, siehe \*(rq\fB\-T\fP\*(rq). Übersteuert die -Umgebungsvariablen $\fBNNTPPORT\fP und $\fBNNTPSPORT\fP. Nur verfügbar, wenn via -NNTP bzw. NNTPS gelesen wird. -.TP -\fB\-q\fP -Nicht prüfen ob neue Newsgruppen vorhanden sind und die Server Meldung des -Tages nicht laden. -.TP -\fB\-Q\fP -Schnellstart. \fBtin\fP so schnell wie möglich starten, zur Zeit entspricht -diese Option \*(rq\fB\-dnq\fP\*(rq. Siehe auch die Kommandozeilenoptionen '\fB\-C\fP\*(rq und -\&\*(rq\fB\-G\fP\*(rq. -.TP -\fB\-r\fP -Nachrichten aus der Ferne vom Standard\-NNTP\-Server, der in der -Umgebungsvariable $\fBNNTPSERVER\fP angegeben oder in der Datei -\fI/etc/nntpserver\fP enthalten ist lesen. -.TP -\fB\-R\fP -Lese mittels \*(rq\fB\-S\fP\*(rq gespeicherte Artikel. -.TP -\fB\-s\fP\fI Verzeichnis\fP -Artikel in/aus Verzeichnis speichern/lesen. Standard ist -\fI${TIN_HOMEDIR:\-"$HOME"}/News\fP. -.TP -\fB\-S\fP -Speichere ungelesene Artikel zum späteren Lesen mittels \*(rq\fB\-R\fP\*(rq. Für -weitere Informationen siehe den Abschnitt "AUTOMATISCHES MAILEN UND -SPEICHERN VON UNGELESENEN ARTIKELN". -.TP -\fB\-t\fP\fI Timeout\fP -Übersteuert die \fBnntp_read_timeout_secs\fP Einstellung. Voreinstellung sind -120, das Maximum 16383 Sekunden. -.TP -\fB\-T\fP -NNTPS (NNTP über TLS) aktivieren. Dies setzt auch die Umgebungsvariable -$\fBNNTPSPORT\fP außer Kraft, falls diese gesetzt ist. Nur verfügbar, wenn über -NNTP gelesen wird. -.TP -\fB\-u\fP -Erstellt/aktualisiert Indexdateien für jede Gruppe in -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP oder der Datei, die durch die Option -\&\*(rq\fB\-f\fP\*(rq angegeben ist. Diese Option ist deaktiviert, wenn \fBtin\fP seine -Indexdateien über einen NNTP\-Server abruft und \fBcache_overview_files\fP -abgestellt ist. -.TP -\fB\-v\fP -Ausführliche Ausgabe für \*(rq\fB\-c\fP\*(rq, \*(rq\fB\-D\fP\*(rq, \*(rq\fB\-M\fP\*(rq, \*(rq\fB\-N\fP\*(rq, -\&\*(rq\fB\-S\fP\*(rq, \*(rq\fB\-u\fP\*(rq, \*(rq\fB\-V\fP\*(rq und \*(rq\fB\-Z\fP\*(rq\-Optionen. Kann mehrfach -verwendet werden, um die Ausführlichkeit zu erhöhen. -.TP -\fB\-V\fP -Versionsinformationen und Kompilieroptionen ausgeben. -.TP -\fB\-w\fP -Schnell\-Modus um nur einen Artikel zu posten. Diese Option beinhaltet -\&\*(rq\fB\-d\fP\*(rq. Nach Möglichkeit mit \*(rq\fB\-n\fP\*(rq kombinieren. -.TP -\fB\-x\fP -Sie können keine Artikel veröffentlichen, wenn Sie diese Option verwenden. -.TP -\fB\-X\fP -Schreibgeschützter Modus. \fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP und Dateien -unter \fI${TIN_HOMEDIR:\-"$HOME"}/.tin\fP werden nicht überschrieben aber -angelegt falls sie nicht existieren. Nach Möglichkeit mit \*(rq\fB\-x\fP\*(rq -kombinieren. -.TP -\fB\-z\fP -\fBtin\fP nur starten wenn es neue/ungelesene Artikel gibt. Falls das der Fall -ist wird der Cursor auf die erste Gruppe mit ungelesenen Artikeln -positioniert. Nützlich um \fBtin\fP in login\-Dateien aufzurufen. -.TP -\fB\-Z\fP -Prüft ob es neue/ungelesene Artikel gibt und beendet sich mit dem -entsprechenden Rückgabewert. Falls mit der \&\*(rq\fB\-v\fP\*(rq Option kombiniert -wird die Zahl der ungelesenen Artikel in jeder Gruppe ausgegeben. Ein -Rückgabewert von 0 bedeutet keine ungelesene Artikel, 1 das ein Fehler -aufgetreten ist und 2 das ungelesene Artikel vorhanden sind. Nützlich in -Skripten. -.PP -\fBtin\fP kann seine Optionen auch dynamisch mit dem Befehl \fBOptionMenu\fP -('\fBM\fP') ändern. Alle Änderungen werden in -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP geschrieben. Weitere Informationen -finden Sie im Abschnitt "MENÜ DER GLOBALE OPTIONEN UND KONFIGURIERBAREN -TINRC\-VARIABLEN" und \fB\%tin\fP(5). -.PP -Eine Liste von Gruppen kann nach den anderen Kommandozeilenoptionen -angegeben werden. Dies kann nützlich sein, falls Sie eine handverlesene -Untermenge der aktiven Newsgruppen einblenden oder abonnieren möchten. Siehe -den Abschnitt "NEWSGROUP LISTEN & WILDCARDS" für die Arten von Muster, die -\fBtin\fP versteht. -.PP -Wenn Sie einen einzelnen Gruppennamen oder eine Wildcard, die nur auf eine -einzelne Gruppe passt angeben, dann wird automatisch in diese Gruppe -betreten. Andernfalls wird der normale Auswahlbildschirm angezeigt mit allen -passenden zusätzlichen Gruppen. -.PP -Mit dem \*(rq\fB\-w\fP\*(rq\-Schalter wird ein angegebener Gruppenname als Vorgabe -verwendet. Falls mehr als eine Gruppe oder ein Platzhalter angegeben wird, -wird nur die erste Gruppe bzw. die erste Gruppe verwendet, die -übereinstimmt. -.PP -Sobald Sie \fBSelectYankActive\fP ('\fBy\fP') verwenden, um alle aktiven Gruppen -einzublenden, oder \fBSelectToggleReadDisplay\fP ('\fBr\fP') verwenden, um den -Status gelesen/ungelesen umzuschalten, sind die Befehlszeilengruppen -verschwunden. Sie können \fBSelectSyncWithActive\fP ('\fBY\fP') verwenden, um die -Datei \fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP erneut zu -lesen um diese wieder anzuzeigen. -.PP -NB: With the \*(rq\fB\-n\fP\*(rq flag, only unsubscribed groups in the -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP file (or the newsrc\-file given by the -\&\*(rq\fB\-f\fP\*(rq command\-line switch or via -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP) can be matched. -.PP -.\" -.\" -Die Befehlszeilenoptionen haben eine höhere Priorität als Attribute und -tinrc Optionen. Daher hat die Befehlszeilenoption Vorrang vor dem -konfigurierten Wert, mit der einzigen Ausnahme, dass, wenn ein Port für den -Newsserver in \fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP angegeben wird, -dieser den Port überschreibt, der in der Befehlszeile angegeben ist. Die -Reihenfolge der Befehlszeilenoptionen ist nicht wichtig. Wenn sie -gegenseitig ausschließend sind, wird die mit der höchsten Priorität -ausgewählt und eventuell eine Warnung ausgegeben. -.SH GEBRAUCH -.\" -.\" -.SS "NEWS ADMINISTRATION" -Die Pflege von Netnews in großen Rechnernetzen kann sehr zeitaufwendig sein, -wie ich feststellen musste, als ich mit der Pflege unseres Newssystems und -der Benutzerbetreuung beauftragt wurde. -.PP -.\" -.\" -A user starting \fBtin\fP for the first time can be automatically subscribed to -a list of newsgroups that are deemed appropriate by the news -administrator. The subscriptions file should be created in your news lib -directory (i.e., \fI${TIN_LIBDIR:\-NEWSLIBDIR}/subscriptions\fP) and should be -world readable. If you read news via NNTP, then your news server must -support the LIST SUBSCRIPTIONS command. It is part of the NNTP List -Extensions (\fBRFC\%6048\fP) and all modern servers should understand it. -.SS ANSICHTEN -\fBtin\fP hat vier unterschiedliche Arbeitsebenen: Auswahlebene, Gruppenebene, -Threadebene und Artikelebene. -.PP -In der Auswahlebene zeigt der Titel (den Name des News\-Servers (mit einem -"/[T]"\- oder "[k]"\-Suffix falls per NNTPS (unsicher) gelesen wird) und) die -Anzahl der abonnierten Gruppen (mit neuen ungelesenen Artikeln). Die -Newsgruppen werden in der Mitte des Bildschirms, in der Regel mit der Anzahl -der ungelesenen Artikel in der gleichen Zeile davor, abgebildet, aber das -kann mittels \fBselect_format\fP angepasst werden. -.PP -.nf -\f(CR\(->M 1 2 comp.security.announce Announcements from the CERT abou - M 2 1 news.admin.announce Announcements for news adminstra - 3 22 news.software.misc News\-related software other than - 4 1475 news.software.nntp The Network News Transfer Protoc - X 5 124 news.software.readers Discussion of software used to r\fR -.fi -.PP -Eventuell steht am Anfang der Zeile noch eines der folgende Zeichen: -.TP 10 -\fBu\fP -Diese Gruppe ist nicht abonniert. Um nur abonnierte Gruppen anzuzeigen kann -die \fBSelectToggleReadDisplay\fP ('\fBr\fP') oder \fBSelectYankActive\fP ('\fBy\fP') -Umschalttaste benutzt werden. -.TP -\fBM\fP -Diese Gruppe ist moderiert. Alle Postings müssen erst vom Gruppen\-Moderator -freigegeben werden bevor sie veröffentlicht werden. \fBtin\fP fragt vor dem -Posten in eine moderierte Gruppe nach einer Bestätigung. -.TP -\fBN\fP -Dies ist eine neue Newsgruppe, die seit der letzten Benutzung von \fBtin\fP -erstellt wurde. Neue Newsgruppen sind standardmäßig nicht abonniert (siehe -jedoch $\fBAUTOSUBSCRIBE\fP / $\fBAUTOUNSUBSCRIBE\fP -Umgebungsvariablen). Abonnieren Sie sie auf die normale Weise, falls die -Gruppe weiterhin in Ihrem Auswahlmenü erscheinen soll. Oder Ignorieren Sie -sie einfach und sie werden beim nächsten Start von \fBtin\fP verschwunden -sein. Sie müssten allen Gruppen einblenden, um sie in einer späteren Sitzung -zu finden. -.TP -\fBD\fP -Diese Gruppe existiert nicht mehr. Falls Sie diese Gruppe nicht mehr sehen -möchten, können Sie sie auf normale Weise abbestellen. Diese Markierung wird -nur angezeigt, wenn Sie \fBstrip_bogus\fP im Optionsmenü auf "ask" gesetzt -haben. -.TP -\fBX\fP -Sie dürfen keine Beiträge mehr in dieser Gruppe verfassen. Oft wird eine -Gruppe durch eine mit einem passenderen Namen ersetzt. -.TP -\fB=\fP -Diese Gruppe wurde umbenannt und in sie darf nicht mehr gepostet -werden. Falls Sie dies trotzdem versuchen, erhalten Sie eine Fehlermeldung -vom Newsserver in der die Gruppe steht in die Sie posten sollten. -.PP -At the Group level the title contains the name of the group, the number of -conversation threads, the abbreviated threading method (\fBthread_articles\fP), -the limit of articles to get (if set; \fBgetart_limit\fP), the total number of -(unread) articles (\fBart_marked_read\fP or \fBart_marked_unread\fP), the number -of hot articles \fBart_marked_selected\fP, the number of read hot articles (if -any; \fBart_marked_read_selected\fP), the number of recent articles -(\fBart_marked_recent\fP) and the number of killed articles -(\fBart_marked_killed\fP). I.e.: -.PP -.nf -.\" FIXME - make this autocenter - alt.sources (5B \-50/23+ 0* 3o 0K) -.fi -.PP -The characters after the numbers are depending to the configuration and if -your are in \fBshow_only_unread_arts\fP mode or not. Some numbers could be -missing if the specific option is not enabled. It might also contain an 'M', -\&'X' or '=' (see above; doesn't work with the \*(rq\fB\-n\fP\*(rq command\-line -switch!) if the group is moderated, set to no posting or postings to it get -redirected. -.PP -If a thread has unread articles it is marked with \fBart_marked_unread\fP in -front of the total number of articles in the thread. If there are recent -articles within the thread it might be marked with \fBart_marked_recent\fP in -front of the total number of articles in the thread \(em this is controlled -by the \fBrecent_time\fP option. If a thread has hot articles in it (see also -section "FILTERING ARTICLES") it's marked with \fBart_marked_selected\fP in -front of the total number of articles in the thread. The display can be -customized via \fBgroup_format\fP. -.PP -.nf -\f(CR de.admin.net\-abuse.announce (11B 13+ 1* 1o 0K) M\fR - -\f(CR\(-> 1 + 3 108 bincancels in de.talk.sex Christopher Lueg Fremdcancel\-FAQ Thomas Roessler 1 [ 7] What is this funny tree in the thr Robert F. Simmig - 2 [ 12] +\(-> Sephan Wagner Tin thread\-level (was: What is Bob Johnson tin threading menu Brian Richardson\fR - -.fi -.PP -.\" FIXME - add description of fields -In der Artikelebene hat der Kopf der Seite folgendes Format: -.PP -.nf -\f(CRSo, 28 Dez 1997 21:21:01 de.admin.news.groups Thread 20 v. 86 -Zeilen 50 Re: EINSPRUCH zu RESULT:de.comm.mobil.ALL Artikel 47 von 59 -Urs Janssen bei Arbeitskreis Kultur und Kommunikati\fR - -\f(CRArtikel\-Körper\fR -.fi -.PP -.\" -.\" -Das Aussehen der Auswahl\-, Gruppen\- und Threadebene kann individuell -angepasst werden. Siehe hierzu den Abschnitt "ANSICHTEN ANPASSEN". -.SS "GEMEINSAME BEWEGUNGSTASTEN" -Diese Tabelle zeigt Tasten welche in \fBtin\fP in allen Ebenen zum Navigieren -verwendet werden. -.RS -.nf -.ta \w'Beg. of list/article 'u +\w'ANSI/vt100 'u - ANSI/vt100 Other Terminals -Beg. of list/article \fBHome\fP \fBFirstPage\fP (\fB^\fP) -End of list/article \fBEnd\fP \fBLastPage\fP (\fB$\fP) -Page Up \fBPgUp\fP \fBPageUp\fP (\fBu\fP, \fB^U\fP or \fB^B\fP) -Page Down \fBPgDn\fP \fBPageDown\fP (\fB^D\fP or \fB^F\fP or \fB\fP) -Line Up \fBUp arrow\fP \fBUp\fP (\fBk\fP or \fB^P\fP) -Line Down \fBDown arrow\fP \fBDown\fP (\fBj\fP or \fB^N\fP) -.fi -.RE -.\" -.\" -.SS "GEMEINSAME BEARBEITUNGSBEFEHLE" -Ein \fB\%emacs\fP(1)\-artiges Bearbeitungspaket erlaubt das einfache Bearbeiten -von eingegebenen Zeichenketten. Eine Verlaufsliste ermöglicht die einfache -Wiederverwendung bereits eingegebener Zeichenketten. Zusätzlich zu den -Cursortasten stehen beim Bearbeiten einer Zeichenkette folgende Befehle zur -Verfügung: -.TP 10 -\fB^A, ^E\fP -An den Zeilenanfang bzw. das Zeilenende springen. -.TP -\fB^F, ^B\fP -Zerstörungsfreie Bewegung um eine Position vorwärts bzw. zurück. -.TP -\fB^D\fP -das aktuell unter dem Cursor befindliche Zeichen löschen oder EOF senden, -falls keine Zeichen im Puffer vorhanden sind. -.TP -\fB^H, \fP -Zeichen links vom Cursor löschen. -.TP -\fB^K\fP -Lösche vom Cursor bis zum Zeilenende. -.TP -\fB^P, ^N\fP -Durch die Verlaufsliste vorwärts bzw. rückwärts bewegen. -.TP -\fB^L, ^R\fP -Aktuelle Zeile neu aufbauen. -.TP -\fB\fP -setzt die Zeile in der Verlaufsliste, falls sie nicht leer ist; fügt eine -Leerzeile an und kehrt zum Anrufer zurück. -.TP -\fB\fP -.\" -.\" -bricht den gegenwärtigen Bearbeitungsvorgang ab. -.SS "ALLGEMEINE BEFEHLE" -Die folgenden Befehle stehen in allen vier Ebenen zur Verfügung und bewirken -überall das Gleichen. -.TP 10 -\fBShellEscape '!'\fP -Shell\-Escape. \fBShellEscape\fP startet selbstständig eine Shell, -\fBShellEscape\fP führt ein externes -aus. Diese Funktion wurde möglicherweise vom Systemadministrator -deaktiviert. -.TP -\fBToggleColor '&'\fP -ANSI Farben ein\-/ausschalten. -.TP -\fBRedrawScr '^L'\fP -Bildschirminhalt neu aufbauen. -.TP -\fBScrollUp '<'\fP -Eine Zeile nach oben blättern (scrollen). -.TP -\fBScrollDown '>'\fP -Eine Zeile nach unten blättern (scrollen). -.TP -\fBPostponed 'O' '^O'\fP -Reload postponed article. If your system blocks the \fBPostponed\fP key you -must quote it by pressing '\fB^V\fP' (CTRL\-V) first. The postpone\-menu offers -the following actions: \fBPromptYes\fP ('\fBy\fP') = reload and spawn editor; -\fBPostponeOverride\fP ('\fBY\fP') = post article (without spawning editor); -\fBPostponeAll\fP ('\fBA\fP') = post all postponed articles (without spawning -editor); \fBPromptNo\fP ('\fBn\fP') = skip this article; \fBQuit\fP ('\fBq\fP') = quit -postponed menu. Currently there is no 'simple' way to delete a postponed -article from the postponed\-file, you have to use the following command -sequence instead: reload it with \fBPostponed\fP, enter editor with -\fBPromptYes\fP, quit editor, discard posting with \fBQuit\fP -('\fB^O\fP\*(rq\fBy\fP\*(rq\fBq\fP'). See also \*(rq\fB\-o\fP\*(rq command\-line switch. -.TP -\fBHelp 'h'\fP -Hilfebildschirm mit den im aktuellen Menü verfügbaren Befehlen. Sie können -\fBSearchSubjF\fP ('\fB/\fP'), \fBSearchSubjB\fP ('\fB?\fP') und \fBSearchRepeat\fP -('\fB\(rs\fP') verwenden, um darin zu suchen. \fBQuit\fP ('\fBq\fP') kehrt zum Menü -zurück. -.TP -\fBToggleHelpDisplay 'H'\fP -Mini\-Hilfe am unterem Bildschirmrand und Posting Etikette nach dem Verfassen -eines Artikels ein\-/ausschalten (\fBbeginner_level\fP). -.TP -\fBDisplayPostHist 'W'\fP -Listet die vom Benutzer geposteten Artikel auf. Es werden das Datum des -Postings, die Newsgruppe und das Thema aufgelistet. Weitere Informationen -finden Sie im Abschnitt "POSTING VERLAUFSLISTE". -.TP -\fBVersion 'v'\fP -.\" ------------------------------------------------------------------- -.\" -Versions\-Informationen ausgeben. -.SS "BEFEHLE ZUR GRUPPENAUSWAHL" -.TP 10 -\fB4\fP -Gruppe 4 auswählen. -.TP -\fBSelectResetNewsrc '^R'\fP -Setzt die Datei \fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP zurück. Dies zerstört -alle Aufzeichnungen über gelesene Artikel, also benutze diese Funktion mit -Vorsicht. -.TP -\fBSetRange '#'\fP -Wählen Sie eine Reihe von Artikeln auf die der nächste Befehl angewendet -wird. Siehe Abschnitt "BEREICHE" für weitere Informationen. -.TP -\fBSelectSortActive '.'\fP -Liste vorhandener Newsgruppen sortieren. -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBSearchSubjF '/'\fP -Vorwärts nach einer Gruppe anhand des Namens und/oder der Kurzbeschreibung -(falls angezeigt) suchen. -.TP -\fBSearchSubjB '?'\fP -Rückwärts mach einer Gruppe anhand des Namens und/oder der Kurzbeschreibung -(falls angezeigt) suchen. -.TP -\fBSelectReadGrp '^J' ''\fP -Lese die aktuelle Gruppe. -.TP -\fBSelectEnterNextUnreadGrp '' 'n'\fP -Nächste Gruppe mit ungelesenen Nachrichten betreten. Wechselt zum Anfang der -Gruppenliste und sucht nach ungelesenen Gruppen. -.TP -\fBCatchup 'c'\fP -Aktuelle Gruppe als gelesen markieren [nach Bestätigung] und zur nächsten -Gruppe in der Gruppenauswahlliste wechseln. -.TP -\fBCatchupNextUnread 'C'\fP -Aktuelle Gruppe als gelesen markieren [nach Bestätigung] und zur nächsten -ungelesenen Gruppe in der Gruppenauswahlliste wechseln. -.TP -\fBSelectToggleDescriptions 'd'\fP -Schaltet die Anzeige zwischen nur den Gruppennamen oder den Gruppennamen und -der Gruppenbeschreibungen um. -.TP -\fBEditFilter 'E'\fP -Filter\-Datei bearbeiten und danach anwenden. -.TP -\fBSelectGoto 'g'\fP -Wählt eine neue Gruppe nach Namen aus. Mit diesem Befehl kann auf jede -Gruppe zugegriffen werden, auch auf solche, die gerade nicht eingeblendet -werden. -.TP -\fBToggleInfoLastLine 'i'\fP -Umschalten der Anzeige der Beschreibung der aktuellen Newsgroup in der -letzten Zeile. Dies ist nicht verfügbar, wenn \fBtin\fP mit \&\*(rq\fB\-d\fP\*(rq -gestartet wurde. -.TP -\fBToggleInverseVideo 'I'\fP -(De)aktiviere inverse Darstellung. -.TP -\fBConnectionInfo 'J'\fP -Informationen zur aktuellen Verbindung anzeigen. -.TP -\fBLookupMessage 'L'\fP -Artikel anhand der \*(rqMessage\-ID:\*(rq Nachschlagen. Wenn keine der in den -\&\*(rqNewsgroups:\*(rq\-Kopfzeilen des referenzierten Artikels aufgeführten Gruppen -verfügbar ist, wird in der letzten Zeile nur der Inhalt der -\&\*(rqNewsgroups:\*(rq\-Kopfzeilen angezeigt. Auf dieser Ebene funktioniert dieser -Befehl nur beim Lesen mittels NNTP und der Server muss [X]HDR (\fBRFC\%2980\fP, -\fBRFC\%3977\fP) oder XPAT (\fBRFC\%2980\fP) unterstützen. -.TP -\fBSelectMoveGrp 'm'\fP -Verschieben Sie die aktuelle Gruppe innerhalb der Gruppenauswahlliste. Durch -Eingabe von '1' wird die Gruppe zur ersten angezeigten Gruppe in der Liste, -durch Eingabe von '8' zur achten Gruppe in der Liste usw. Durch Eingabe von -\&'$' wird die Gruppe zur letzten angezeigten Gruppe. -.TP -\fBOptionMenu 'M'\fP -Menü für benutzerkonfigurierbare Optionen (weitere Informationen finden sich -im Abschnitt "GLOBALES OPTIONSMENÜ UND KONFIGURIERBARE TINRC VARIABLEN"). -.TP -\fBSelectNextUnreadGrp 'N'\fP -Setzt den Cursor auf die nächste Gruppe mit ungelesenen Artikeln. -.TP -\fBQuit 'q'\fP -\fBtin\fP beenden, falls \fBconfirm_choice\fP gesetzt ist wird nochmal -nachgefragt. -.TP -\fBQuitTin 'Q'\fP -Beendet \fBtin\fP sofort, ohne Bestätigungsnachfrage. -.TP -\fBSelectToggleReadDisplay 'r'\fP -Anzeige aller abonnierten Gruppen und nur der Gruppen mit ungelesenen -Artikeln umschalten. Der Befehl hat keine Auswirkung, wenn beim Start von -\fBtin\fP Gruppen in der Befehlszeile angegeben wurden. -.TP -\fBBugReport 'R'\fP -Einen Fehlerbericht oder Kommentar an -senden. Dies ist der sinnvollste Weg um Fehler zu melden und behoben zu -bekommen bzw. nach neuen Funktionen zu fragen. -.TP -\fBSelectSubscribe 's'\fP -Ausgewählte Gruppe abonnieren. -.TP -\fBSelectSubscribePat 'S'\fP -Abonnieren Sie Gruppen, die dem vom Benutzer angegebenen Muster -entsprechen. Siehe den Abschnitt "NEWSGROUP LISTEN & WILDCARDS" für die -Mustertypen, die \fBtin\fP versteht. -.TP -\fBSelectUnsubscribe 'u'\fP -Aktuelle Gruppe abbestellen. Dies kann zum Entfernen ungültiger Gruppen -verwendet werden. Siehe \fBstrip_bogus\fP im Abschnitt "MENÜ DER GLOBALE -OPTIONEN UND KONFIGURIERBAREN TINRC\-VARIABLEN". -.TP -\fBSelectUnsubscribePat 'U'\fP -Abmelden von Gruppen, die dem vom Benutzer angegebenen Muster -entsprechen. Siehe den Abschnitt "NEWSGROUP LISTEN & WILDCARDS" für die -Mustertypen, die tin versteht. -.TP -\fBPost 'w'\fP -Post an article to current group. If posting fails for some reason, you'll -get the chance to \fBPostEdit\fP ('\fBe\fP') the article again, \fBPostPostpone\fP -('\fBo\fP') it for later processing (see also \*(rq\fB\-o\fP\*(rq command\-line switch) or -discard it via \fBQuit\fP ('\fBq\fP'). -.TP -\fBSelectQuitNoWrite 'X'\fP -\fBtin\fP beenden ohne ggf. gemachte Änderungen an den Einstellung zu -speichern. -.TP -\fBSelectYankActive 'y'\fP -Yanks in all groups. Toggles the displayed groups between all the groups in -the \fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP file and just -those that are subscribed to in \fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP. -.TP -\fBSelectSyncWithActive 'Y'\fP -Liest die Datei \fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP -erneut ein, um zu sehen, ob seit dem Start von \fBtin\fP neue Nachrichten -eingetroffen sind. -.TP -\fBSelectMarkGrpUnread 'z' 'Z'\fP -.\" ------------------------------------------------------------------- -.\" -Alle Artikel in der aktuellen Gruppe als ungelesen markieren. -.SS GRUPPEN\-INDEX\-BEFEHLE -Alle Suchen auf dieser Ebene sind im \fBshow_only_unread_arts\fP\-Modus auf -ungelesene Artikel beschränkt. \fBGroupToggleReadUnread\fP ('\fBr\fP') kann -verwendet werden, um die Einstellung direkt vor/nach der Suche umzuschalten. -.TP 10 -\fB4\fP -Artikel 4 auswählen. -.TP -\fBMenuFilterSelect '^A'\fP -Automatische Hervorheben des/der Artikel(s) über ein Menü. Lesen Sie den -Abschnitt "FILTERN VON ARTIKELN" für weitere Informationen. -.TP -\fBMenuFilterKill '^K'\fP -Artikel mit Hilfe eines Menüs ausblenden. Lesen Sie für weitere -Informationen den Abschnitt "FILTERN VON ARTIKELN". -.TP -\fBMarkFeedRead '^X'\fP -Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte -(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als -gelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll. -.TP -\fBMarkFeedUnread '^W'\fP -Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte -(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als -ungelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll. -.TP -\fBSetRange '#'\fP -Wählen Sie eine Reihe von Artikeln auf die der nächste Befehl angewendet -wird. Siehe Abschnitt "BEREICHE" für weitere Informationen. -.TP -\fBLastViewed '\-'\fP -Zur zuletzt angezeigte Nachricht springen. -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBSearchSubjF '/'\fP -Vorwärts nach dem angegebenem Subject suchen. -.TP -\fBSearchSubjB '?'\fP -Rückwärts nach dem angegebenem Subject suchen. -.TP -\fBGroupSelThd '*'\fP -Wähle aktuellen Thread für die spätere Verarbeitung aus. -.TP -\fBGroupDoAutoSel '+'\fP -Wählt alle Threads in der aktuellen Gruppe aus. Es ist eine Abkürzung für -\fBGroupSelPattern\fP mit einem Muster von \*(rq*\*(rq. -.TP -\fBGroupToggleThdSel '.'\fP -Auswahl des aktuellen Threads umschalten. Wenn mindestens ein ungelesener -Artikel (aber nicht jeder ungelesene Artikel) im aktuellen Thread ausgewählt -ist, werden alle ungelesenen Artikel ausgewählt. -.TP -\fBGroupSelThdIfUnreadSelected ';'\fP -Wenn für jeden Thread in der aktuellen Gruppe mindestens ein ungelesener -Artikel ausgewählt ist, werden alle ungelesenen Artikel ausgewählt. Dies ist -nützlich für die automatische Auswahl anhand des Autors, wenn der Leser den -gesamten Thread sehen möchte. -.TP -\fBGroupSelPattern '='\fP -Fordert zur Eingabe eines Musters auf, mit dem verglichen werden soll. Alle -Threads, deren Subject mit dem Muster übereinstimmen, werden als ausgewählt -markiert. Wenn nur '\fB\fP' eingeben, wird das zuletzt eingegebene -Muster wiederverwendet. -.TP -\fBGroupReverseSel '@'\fP -Markierung für alle Artikel umkehren. -.TP -\fBGroupUndoSel '~'\fP -Undo all selections on all articles. It clears the toggle effect of -\fBGroupMarkUnselArtRead\fP ('\fBX\fP') command. Thus after first doing a -\fBGroupMarkUnselArtRead\fP, one can then do \fBGroupUndoSel\fP to reset -articles. Thus, one can iteratively whittle down uninteresting threads. -.TP -\fBPipe '|'\fP -Leitet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Befehl weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBQuickFilterSelect '['\fP -Auto select article(s) with a single key [after confirmation]. The defaults -used for selection are based upon the following four tinrc config variables: -\fBdefault_filter_select_case\fP, \fBdefault_filter_select_expire\fP, -\fBdefault_filter_select_global\fP and \fBdefault_filter_select_header\fP. Read -the section "GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES" for a -full explanation of these variables and "FILTERING ARTICLES" for more -information on filtering. -.TP -\fBQuickFilterKill ']'\fP -Kill article(s) with a single key [after confirmation]. The defaults used -for killing are based upon the following four tinrc config variables: -\fBdefault_filter_kill_case\fP, \fBdefault_filter_kill_expire\fP, -\fBdefault_filter_kill_global\fP and \fBdefault_filter_kill_header\fP. Read the -section "GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES" for a full -explanation of these variables and "FILTERING ARTICLES" for more information -on filtering. -.TP -\fBGroupReadBasenote '^J' ''\fP -Lese den aktuelle Artikel. -.TP -\fBGroupNextUnreadArtOrGrp ''\fP -Zeige den nächsten ungelesenen Artikel oder die nächste ungelesene Gruppe. -.TP -\fBSearchAuthF 'a'\fP -Autoren\-Suche vorwärts. Sucht nach Artikeln mit einem bestimmtem -\&\*(rqFrom:\*(rq\-Header. -.TP -\fBSearchAuthB 'A'\fP -Autoren\-Suche rückwärts. Siehe auch \fBSearchAuthF\fP ('\fBa\fP') oben. -.TP -\fBSearchBody 'B'\fP -Durchsuche die Körper aller Artikel in der Gruppe (kann langsam sein). Die -Suche kann mit \fBQuit\fP ('\fBq\fP') abgebrochen werden. -.TP -\fBCatchup 'c'\fP -Markiert alle Artikel als gelesen [nach Bestätigung] und kehrt dann zur -Gruppenauswahlliste zurück. -.TP -\fBCatchupNextUnread 'C'\fP -Markiert alle Artikel als gelesen [nach Bestätigung] und betritt die nächste -Gruppe mit ungelesenen Nachrichten. -.TP -\fBGroupToggleSubjDisplay 'd'\fP -Durchläuft die Anzeige des Autors durch alle möglichen Optionen für die -tinrc\-Variable \fBshow_author\fP. -.TP -\fBGroupCancel 'D'\fP -Löschen (cancel) oder Ersetzen (supersede) des aktuellen Artikels. Er muss -vom selben Benutzer geschrieben worden sein. Die Nachricht zum Löschen ist -in der Newsgruppe 'control' oder 'control.cancel' zu sehen. -.TP -\fBEditFilter 'E'\fP -Filter\-Datei bearbeiten und danach anwenden. -.TP -\fBGroupGoto 'g'\fP -Wählt eine neue Gruppe nach Namen aus. Mit diesem Befehl kann auf jede -Gruppe zugegriffen werden, auch auf solche, die gerade nicht eingeblendet -werden. -.TP -\fBGroupToggleGetartLimit 'G'\fP -Artikel/Gruppe Beschränkungen ein\-/ausschalten. -.TP -\fBToggleInfoLastLine 'i'\fP -Subject des ersten Artikels im aktuellen Thread in der letzten Zeile -anzeigen. -.TP -\fBToggleInverseVideo 'I'\fP -(De)aktiviere inverse Darstellung. -.TP -\fBConnectionInfo 'J'\fP -Informationen zur aktuellen Verbindung anzeigen. -.TP -\fBGroupMarkThdRead 'K'\fP -Markieren den Artikel/Thread als gelesen und fährt mit dem nächsten -ungelesenen Artikel/Thread fort. Wenn ein Bereich von Artikeln/Threads -festgelegt ist, wird der Bereich als gelesen markiert und nicht der aktuelle -Artikel/Thread. Falls getaggte Artikel/Threads vorhanden sind, wird gefragt, -wie fortgefahren werden soll. -.TP -\fBGroupListThd 'l'\fP -Öffnet den Thread unter der aktuellen Cursorposition. -.TP -\fBLookupMessage 'L'\fP -Artikel nach \*(rqMessage\-ID:\*(rq suchen. In dieser Ebene werden nur die IDs in -der aktuellen Gruppe durchsucht. -.TP -\fBGroupMail 'm'\fP -Mailt den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an -jemanden weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBOptionMenu 'M'\fP -Menü für benutzerkonfigurierbare Optionen (weitere Informationen finden sich -im Abschnitt "GLOBALES OPTIONSMENÜ UND KONFIGURIERBARE TINRC VARIABLEN"). -.TP -\fBGroupNextGroup 'n'\fP -Zur nächsten Newsgruppe springen. -.TP -\fBGroupNextUnreadArt 'N'\fP -Zum nächsten ungelesenen Artikel springen. -.TP -\fBPrint 'o'\fP -Sendet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Drucker. Mehr Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, -DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBGroupPrevGroup 'p'\fP -Zur vorherigen Gruppe springen. -.TP -\fBGroupPrevUnreadArt 'P'\fP -Zum vorherigen ungelesenen Artikel gehen. -.TP -\fBQuit 'q'\fP -Kehre zur vorherigen Ebene zurück. -.TP -\fBQuitTin 'Q'\fP -Beendet \fBtin\fP sofort, ohne Bestätigungsnachfrage. -.TP -\fBGroupToggleReadUnread 'r'\fP -Wechselt zwischen der Anzeige aller und nur ungelesener Artikel. -.TP -\fBBugReport 'R'\fP -Einen Fehlerbericht oder Kommentar an -senden. Dies ist der sinnvollste Weg um Fehler zu melden und behoben zu -bekommen bzw. nach neuen Funktionen zu fragen. -.TP -\fBGroupSave 's'\fP -Speichert den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel. Mehr -Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, DRUCKEN, -NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBGroupAutoSave 'S'\fP -Markierte Artikel automatisch ohne weiteres Nachfragen speichern. -.TP -\fBGroupTag 't'\fP -Tag\-Status des aktuellen Artikels/Threads für \fBGroupMail\fP ('\fBm\fP') / -\fBPipe\fP ('\fB|\fP') / \fBPrint\fP ('\fBo\fP') / \fBGroupSave\fP ('\fBs\fP') / -\fBGroupRepost\fP ('\fBx\fP') umschalten. -.TP -\fBGroupTagParts 'T'\fP -Alle Teile der aktuellen mehrteiligen Nachricht automatisch in der -Reihenfolge markieren bzw. die vorhandenen Markierungen entfernen. -.TP -\fBGroupToggleThreading 'u'\fP -Cycle the threading mode through no threading, threading by subject, -threading by references, threading on both subject and references, group -multipart articles into a thread (\*(rqSubject:\*(rq based). -.TP -\fBGroupUntag 'U'\fP -Markierung aller markierten Artikel entfernen. -.TP -\fBPost 'w'\fP -Veröffentlichen Sie einen Artikel in der aktuellen Gruppe. Wenn das -Versenden aus irgendeinem Grund fehlschlägt, haben Sie die Möglichkeit, den -Artikel über \fBPostEdit\fP ('\fBe\fP') erneut zu bearbeiten, ihn über -\fBPostPostpone\fP ('\fBo\fP') für eine spätere Bearbeitung zurückzustellen (siehe -auch \*(rq\fB\-o\fP\*(rq Kommandozeilenschalter) oder ihn über \fBQuit\fP ('\fBq\fP') zu -verwerfen. -.TP -\fBGroupRepost 'x'\fP -Erneutes Posten eines bereits geposteten Artikels / Threads / automatisch -ausgewählter (heißer) Artikel / Artikel, die einem Muster entsprechen / mit -Tags versehenen Artikel in eine andere Newsgroup. Nützlich zum -Wiederveröffentlichen von globalen zu lokalen Newsgroups. Nicht verwenden um -eigenen Artikel mehrfach zu posten. -.TP -\fBGroupMarkUnselArtRead 'X'\fP -Mark all unread articles that have not been selected as read, redraw screen -to reflect changes and put index at the first thread to begin reading. -Pressing \fBGroupMarkUnselArtRead\fP ('\fBX\fP') again will toggle back to the way -it was before. See \fBGroupUndoSel\fP ('\fB~\fP') command for clearing the toggle -effect, leaving the group will also clear the toggle effect and make the -changes permanent. -.TP -\fBMarkArtUnread 'z'\fP -Aktuellen Artikel als ungelesen markieren. -.TP -\fBMarkThdUnread 'Z'\fP -.\" ------------------------------------------------------------------- -.\" -Aktuellen Thread als ungelesen markieren. Wenn ein Thread\-Bereich festgelegt -ist, wird der Bereich anstelle des aktuellen Threads als ungelesen -markiert. Falls getaggte Threads vorhanden sind, wird gefragt, wie -fortgefahren werden soll. -.SS "BEFEHLE ZUM AUFLISTEN VON THREADS" -.\" this sections should be complete -.TP 10 -\fB4\fP -Artikel 4 aus dem Thread auswählen. -.TP -\fBMenuFilterSelect '^A'\fP -Automatische Hervorheben des/der Artikel(s) über ein Menü. Lesen Sie den -Abschnitt "FILTERN VON ARTIKELN" für weitere Informationen. -.TP -\fBMenuFilterKill '^K'\fP -Artikel mit Hilfe eines Menüs ausblenden. Lesen Sie für weitere -Informationen den Abschnitt "FILTERN VON ARTIKELN". -.TP -\fBMarkFeedRead '^X'\fP -Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte -(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als -gelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll. -.TP -\fBMarkFeedUnread '^W'\fP -Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte -(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als -ungelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll. -.TP -\fBSetRange '#'\fP -Wählen Sie eine Reihe von Artikeln auf die der nächste Befehl angewendet -wird. Siehe Abschnitt "BEREICHE" für weitere Informationen. -.TP -\fBLastViewed '\-'\fP -Zur zuletzt angezeigte Nachricht springen. -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBSearchSubjF '/'\fP -Vorwärts nach dem angegebenem Subject suchen. -.TP -\fBSearchSubjB '?'\fP -Rückwärts nach dem angegebenem Subject suchen. -.TP -\fBThreadSelArt '*'\fP -Wähle aktuellen Thread für die spätere Verarbeitung aus. -.TP -\fBThreadToggleArtSel '.'\fP -Auswahl des aktuellen Artikels umkehren. -.TP -\fBThreadReverseSel '@'\fP -Artikelauswahl invertieren. -.TP -\fBThreadUndoSel '~'\fP -Alle Markierungen im aktuellen Thread rückgängig machen. -.TP -\fBPipe '|'\fP -Leitet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Befehl weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBThreadReadArt '^J' ''\fP -Aktuellen Artikel im Thread lesen. -.TP -\fBThreadReadNextArtOrThread ''\fP -Nächsten ungelesenen Artikel im Thread anzeigen. -.TP -\fBSearchAuthF 'a'\fP -Author forward search. This searches for articles with a specific \*(rqFrom:\*(rq -line. The search will wrap over into the next thread if nothing is found in -the current one. -.TP -\fBSearchAuthB 'A'\fP -Autoren\-Suche rückwärts. Siehe auch \fBSearchAuthF\fP ('\fBa\fP') oben. -.TP -\fBSearchBody 'B'\fP -Durchsuche die Körper aller Artikel in der Gruppe (kann langsam sein). Die -Suche kann mit \fBQuit\fP ('\fBq\fP') abgebrochen werden. -.TP -\fBCatchup 'c'\fP -Thread [nach Bestätigung] als gelesen markieren und zur Gruppenindexseite -zurückkehren. -.TP -\fBCatchupNextUnread 'C'\fP -Thread [nach Bestätigung] als gelesen markieren und zum nächsten Thread mit -ungelesenen Nachrichten wechseln. -.TP -\fBThreadToggleSubjDisplay 'd'\fP -Durchläuft die Anzeige des Autors durch alle möglichen Optionen für die -tinrc\-Variable \fBshow_author\fP. -.TP -\fBThreadCancel 'D'\fP -Löschen (cancel) oder Ersetzen (supersede) des aktuellen Artikels. Er muss -vom selben Benutzer geschrieben worden sein. Die Nachricht zum Löschen ist -in der Newsgruppe 'control' oder 'control.cancel' zu sehen. -.TP -\fBEditFilter 'E'\fP -Filter\-Datei bearbeiten und danach anwenden. -.TP -\fBThreadFollowupQuote 'f'\fP -Veröffentlicht ein Follow\-up zum aktuellen Artikel mit einer Kopie des -Artikels. -.TP -\fBThreadFollowup 'F'\fP -Veröffentlicht ein Follow\-up zum aktuellen Artikel ohne eine Kopie des -Artikels. -.TP -\fBToggleInfoLastLine 'i'\fP -Subject des geöffneten Artikels in der untersten Zeile anzeigen. -.TP -\fBToggleInverseVideo 'I'\fP -(De)aktiviere inverse Darstellung. -.TP -\fBConnectionInfo 'J'\fP -Informationen zur aktuellen Verbindung anzeigen. -.TP -\fBThreadMarkArtRead 'K'\fP -Mark article as read and move onto the next unread article. If a range of -articles is set, the range will be marked as read instead of the current -article. When tagged articles are present, a prompt asks how to proceed. -.TP -\fBLookupMessage 'L'\fP -Artikel nach \*(rqMessage\-ID:\*(rq suchen. In dieser Ebene werden nur die IDs in -der aktuellen Gruppe durchsucht. -.TP -\fBThreadMail 'm'\fP -Mailt den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an -jemanden weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBPrint 'o'\fP -Sendet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Drucker. Mehr Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, -DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBQuit 'q'\fP -Kehre zur vorherigen Ebene zurück. -.TP -\fBQuitTin 'Q'\fP -Beendet \fBtin\fP sofort, ohne Bestätigungsnachfrage. -.TP -\fBBugReport 'R'\fP -Einen Fehlerbericht oder Kommentar an -senden. Dies ist der sinnvollste Weg um Fehler zu melden und behoben zu -bekommen bzw. nach neuen Funktionen zu fragen. -.TP -\fBThreadSave 's'\fP -Speichert den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel. Mehr -Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, DRUCKEN, -NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBThreadAutoSave 'S'\fP -Markierte Artikel automatisch ohne weiteres Nachfragen speichern. -.TP -\fBThreadTag 't'\fP -Tag\-Status des aktuellen Artikels zum Versenden, Weiterleiten, Drucken, -Speichern oder erneuten Veröffentlichen umschalten. -.TP -\fBThreadTagParts 'T'\fP -Alle Teile der aktuellen mehrteiligen Nachricht automatisch in der -Reihenfolge markieren bzw. die vorhandenen Markierungen entfernen. -.TP -\fBThreadUntag 'U'\fP -Markierung aller markierten Threads entfernen. -.TP -\fBPost 'w'\fP -Veröffentlichen Sie einen Artikel in der aktuellen Gruppe. Wenn das -Versenden aus irgendeinem Grund fehlschlägt, haben Sie die Möglichkeit, den -Artikel über \fBPostEdit\fP ('\fBe\fP') erneut zu bearbeiten, ihn über -\fBPostPostpone\fP ('\fBo\fP') für eine spätere Bearbeitung zurückzustellen (siehe -auch \*(rq\fB\-o\fP\*(rq Kommandozeilenschalter) oder ihn über \fBQuit\fP ('\fBq\fP') zu -verwerfen. -.TP -\fBMarkArtUnread 'z'\fP -Mark current article in thread as unread. If a range of articles is set, the -range will be marked as unread instead of the current article. When tagged -articles are present, a prompt asks how to proceed. -.TP -\fBMarkThdUnread 'Z'\fP -.\" ------------------------------------------------------------------- -.\" -Alle Artikel im aktuellen Thread als ungelesen markieren. -.SS "BEFEHLE ZUM ANZEIGEN VON ARTIKELN" -.\" FIXME - refine descriptions -.TP 10 -\fB0\fP -Den ersten (Basis) Artikel in diesem Thread lesen. -.TP -\fB4\fP -Antwort 4 im diesem Thread lesen. -.TP -\fBMenuFilterSelect '^A'\fP -Automatische Hervorheben des/der Artikel(s) über ein Menü. Lesen Sie den -Abschnitt "FILTERN VON ARTIKELN" für weitere Informationen. -.TP -\fBPageReplyQuoteHeaders '^E'\fP -Dem Autor des aktuellen Artikels per E\-Mail mit einer Kopie des Artikels -einschließlich aller Header anworten. -.TP -\fBPagePGPCheckArticle '^G'\fP -\fB\%pgp\fP(1) / \fB\%gpg\fP(1)\-Operationen für den Artikel ausführen. Es muß -Inline\-PGP (\fBRFC\%4880\fP) und nicht MIME\-PGP (\fBRFC\%3156\fP) vorliegen. -.TP -\fBPageToggleRaw '^H'\fP -Schaltet den Anzeigemodus um (Roh einschließlich aller Header zu -Aufbereitet). -.TP -\fBMenuFilterKill '^K'\fP -Artikel mit Hilfe eines Menüs ausblenden. Lesen Sie für weitere -Informationen den Abschnitt "FILTERN VON ARTIKELN". -.TP -\fBPageToggleTabs '^T'\fP -Tabulatorbreite zwischen 4 und 8 Zeichen Umschalten. -.TP -\fBPageFollowupQuoteHeaders '^W'\fP -Follow\-up zum aktuellen Artikel mit einer Kopie des Artikels einschließlich -aller Header veröffentlichen. -.TP -\fBPageToggleTex2iso '"'\fP -TeX auf ISO\-Dekodierung für aktuellen Artikel umschalten. Das -Standardverhalten wird der Variable \fBtex2iso_conv\fP aus der tinrc\-Datei -entnommen. -.TP -\fBPageToggleAllHeaders '*'\fP -Schaltet die Anzeige aller Header vs. Header in \fBnews_headers_to_display\fP -um. -.TP -\fBPageArticleInfo \*(rq'\fP -Detaillierte MIME\-Informationen des Artikels. -.TP -\fBPageToggleRot '%'\fP -ROT\-13 Entschlüsseln ein\-/ausschalten. -.TP -\fBPageToggleUue '('\fP -Schalten Sie die Anzeige von uuencodierten Abschnitten um. Das -Standardverhalten wird durch die Variable \fBhide_uue\fP in der tinrc\-Datei -festgelegt. -.TP -\fBPageReveal ')'\fP -The form feed character (^L) is often used to hide 'spoilers' that the -reader may not initially wish to see when viewing an article. Any text after -a formfeed is not displayed. This key\-press acts like a reveal key and turns -the hidden text back on. Scrolling down will also reveal the text, scrolling -up will hide it again. -.TP -\fBLastViewed '\-'\fP -Zur zuletzt angezeigte Nachricht springen. -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBSearchSubjF '/'\fP -Vorwärts innerhalb dieses Artikels suchen. -.TP -\fBSearchSubjB '?'\fP -Rückwärts innerhalb dieses Artikels suchen. -.TP -\fBPageSkipIncludedText ':'\fP -Zum Ende des nächsten zitierten Textblocks in diesem Artikel -springen. Zitierter Text ist alles, was mit \fBquote_regex\fP, \fBquote_regex2\fP -oder \fBquote_regex3\fP übereinstimmt. -.TP -\fBPageTopThd '<'\fP -Gehe zum ersten Artikel im aktuellen Thread. -.TP -\fBPageBotThd '>'\fP -Gehe zum letzten Artikel im aktuellen Thread. -.TP -\fBPageToggleHighlight '_'\fP -Wort\-Hervorheben ein\-/ausschalten. -.TP -\fBPipe '|'\fP -Leitet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Befehl weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBQuickFilterSelect '['\fP -Auto select article(s) with a single key. The defaults used for selection -are set based upon the following four tinrc config variables: -\fBdefault_filter_select_case\fP, \fBdefault_filter_select_expire\fP, -\fBdefault_filter_select_global\fP and \fBdefault_filter_select_header\fP Read the -section "GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES" for a full -explanation of these variables and "FILTERING ARTICLES" for more information -on filtering. -.TP -\fBQuickFilterKill ']'\fP -Kill article(s) with a single key. The defaults used for killing are based -upon the following four tinrc config variables: \fBdefault_filter_kill_case\fP, -\fBdefault_filter_kill_expire\fP, \fBdefault_filter_kill_global\fP and -\fBdefault_filter_kill_header\fP. Read the section "GLOBAL OPTIONS MENU AND -TINRC CONFIGURABLE VARIABLES" for a full explanation of these variables and -"FILTERING ARTICLES" for more information on filtering. -.TP -\fBPageNextThd '^J' ''\fP -Zum nächsten Basisartikel springen. -.TP -\fBPageNextUnread ''\fP -Go to next unread article. If the tinrc variable \fBgoto_next_unread\fP doesn't -contain PageNextUnread, then this key will first page through the current -article. -.TP -\fBSearchAuthF 'a'\fP -Suche nach Autor (vorwärts). -.TP -\fBSearchAuthB 'A'\fP -Suche nach Autor (rückwärts). -.TP -\fBSearchBody 'B'\fP -Durchsuche die Körper aller Artikel in der Gruppe (kann langsam sein). Die -Suche kann mit \fBQuit\fP ('\fBq\fP') abgebrochen werden. -.TP -\fBCatchup 'c'\fP -Mark the current thread as read [after confirmation] and return to the -previous menu. Move cursor to next item. -.TP -\fBCatchupNextUnread 'C'\fP -Mark the rest of the current thread as read [after confirmation] and enter -the next thread with unread articles. -.TP -\fBPageCancel 'D'\fP -Löschen (cancel) oder Ersetzen (supersede) des aktuellen Artikels. Er muss -vom selben Benutzer geschrieben worden sein. Die Nachricht zum Löschen ist -in der Newsgruppe 'control' oder 'control.cancel' zu sehen. -.TP -\fBPageEditArticle 'e'\fP -Aktuellen Artikel bearbeiten. Dies ist auf Mailgroups und gespeicherte -Nachrichten beschränkt. -.TP -\fBEditFilter 'E'\fP -Filter\-Datei bearbeiten und danach anwenden. -.TP -\fBPageFollowupQuote 'f'\fP -Veröffentlicht ein Follow\-up zum aktuellen Artikel mit einer Kopie des -Artikels. -.TP -\fBPageFollowup 'F'\fP -Veröffentlicht ein Follow\-up zum aktuellen Artikel ohne eine Kopie des -Artikels. -.TP -\fBPageFirstPage 'g'\fP -Zum Anfang des Artikels springen. -.TP -\fBPageLastPage 'G'\fP -Zum Ende des Artikels springen. -.TP -\fBToggleInfoLastLine 'i'\fP -Subject des geöffneten Artikels in der untersten Zeile anzeigen. -.TP -\fBToggleInverseVideo 'I'\fP -(De)aktiviere inverse Darstellung. -.TP -\fBConnectionInfo 'J'\fP -Informationen zur aktuellen Verbindung anzeigen. -.TP -\fBPageKillThd 'K'\fP -Markiere den Rest des Threads als gelesen und springe zu nächstem -ungelesenen Thread. -.TP -\fBPageListThd 'l'\fP -Zeigt das Thread\-Menü an, zu dem der aktuelle Artikel gehört. -.TP -\fBLookupMessage 'L'\fP -Artikel nach \*(rqMessage\-ID:\*(rq suchen. In dieser Ebene werden nur die IDs in -der aktuellen Gruppe durchsucht. -.TP -\fBPageMail 'm'\fP -Mailt den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an -jemanden weiter. Mehr Informationen finden Sie im Abschnitt "MAILEN, -WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBOptionMenu 'M'\fP -Menü für benutzerkonfigurierbare Optionen (weitere Informationen finden sich -im Abschnitt "GLOBALES OPTIONSMENÜ UND KONFIGURIERBARE TINRC VARIABLEN"). -.TP -\fBPageNextArt 'n'\fP -Gehe zum nächsten Artikel. -.TP -\fBPageNextUnreadArt 'N'\fP -Zum nächsten ungelesenen Artikel springen. -.TP -\fBPrint 'o'\fP -Sendet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den -Drucker. Mehr Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, -DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBPagePrevArt 'p'\fP -Gehe zum vorherigen Artikel. -.TP -\fBPagePrevUnreadArt 'P'\fP -Gehe zum vorherigen ungelesenen Artikel. -.TP -\fBQuit 'q'\fP -Kehrt zur vorherigen Ebene zurück. -.TP -\fBQuitTin 'Q'\fP -Beendet \fBtin\fP sofort, ohne Bestätigungsnachfrage. -.TP -\fBPageReplyQuote 'r'\fP -Per E\-Mail an den Autor des aktuellen Artikels antworten und eine Kopie des -Artikels beifügen. -.TP -\fBPageReply 'R'\fP -Per E\-Mail an den Autor des aktuellen Artikels antworten ohne eine Kopie des -Artikels beizufügen. -.TP -\fBPageSave 's'\fP -Speichert den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) -Artikel / Artikel, die dem Muster entsprechen / markierte Artikel. Mehr -Informationen finden Sie im Abschnitt "MAILEN, WEITERLEITEN, DRUCKEN, -NACHSENDEN UND SPEICHERN VON ARTIKELN". -.TP -\fBPageAutoSave 'S'\fP -Markierte Artikel automatisch ohne weiteres Nachfragen speichern. -.TP -\fBPageTag 't'\fP -Tag\-Status des aktuellen Artikels zum Versenden, Weiterleiten, Drucken, -Speichern oder erneuten Veröffentlichen umschalten. -.TP -\fBPageGroupSel 'T'\fP -Kehrt zur Auswahlebene zurück. -.TP -\fBPageGotoParent 'u'\fP -Gehe zum übergeordneten Artikel. -.TP -\fBPageViewUrl 'U'\fP -Eine Liste der URLs im aktuellen Artikel anzeigen. Weitere Informationen -finden Sie im Abschnitt "URL LISTE". -.TP -\fBPageViewAttach 'V'\fP -Zeigt eine Liste der Anhänge des aktuellen Artikels an. Weitere -Informationen finden Sie im Abschnitt "ANHANGSVERZEICHNIS". -.TP -\fBPost 'w'\fP -Veröffentlichen Sie einen Artikel in der aktuellen Gruppe. Wenn das -Versenden aus irgendeinem Grund fehlschlägt, haben Sie die Möglichkeit, den -Artikel über \fBPostEdit\fP ('\fBe\fP') erneut zu bearbeiten, ihn über -\fBPostPostpone\fP ('\fBo\fP') für eine spätere Bearbeitung zurückzustellen (siehe -auch \*(rq\fB\-o\fP\*(rq Kommandozeilenschalter) oder ihn über \fBQuit\fP ('\fBq\fP') zu -verwerfen. -.TP -\fBPageRepost 'x'\fP -Erneutes Posten eines bereits geposteten Artikels / Threads / automatisch -ausgewählter (heißer) Artikel / Artikel, die einem Muster entsprechen / mit -Tags versehenen Artikel in eine andere Newsgroup. Nützlich zum -Wiederveröffentlichen von globalen zu lokalen Newsgroups. Nicht verwenden um -eigenen Artikel mehrfach zu posten. -.TP -\fBMarkArtUnread 'z'\fP -Alle Artikel als ungelesen markieren. -.TP -\fBMarkThdUnread 'Z'\fP -.\" ------------------------------------------------------------------- -.\" -Markiere den aktuellen Thread als ungelesen. -.SS "URL LISTE" -\fBPageViewUrl\fP ('\fBU\fP') zeigt eine Liste der URLs im aktuellen Artikel -an. Neben den üblichen Bewegungstasten stehen folgende Befehle zur -Verfügung: -.RS 4 -.TP 10 -\fBUrlSelect '^J' ''\fP -Die aktuelle URL wird abgefragt und mit dem \fBurl_handler\fP -geöffnet. '\fB\fP' oder keine Eingabe überspringt die URL. -.TP -\fBSearchSubjF '/'\fP -Suche nach URL (vorwärts). -.TP -\fBSearchSubjB '?'\fP -Suche nach URL (rückwärts). -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBShellEscape '!'\fP -Ausgang zur Shell. -.TP -\fBToggleInfoLastLine 'i'\fP -Anzeige der aktuellen URL in der letzten Zeile (de)aktivieren. -.TP -\fBHelp 'h'\fP -Hilfeseite der verfügbaren Befehle. -.TP -\fBToggleHelpDisplay 'H'\fP -Mini\-Hilfe am unterem Bildschirmrand und Posting Etikette nach dem Verfassen -eines Artikels ein\-/ausschalten (\fBbeginner_level\fP). -.RE -.\" ------------------------------------------------------------------- -.\" -.SS ANHANGSVERZEICHNIS -\fBPageViewAttach\fP ('\fBV\fP') zeigt eine Liste der Anhänge des aktuellen -Artikels an. Neben den üblichen Bewegungstasten stehen folgende Befehle zur -Verfügung: -.RS 4 -.TP 10 -\fBAttachPipe 'p'\fP -Anhang an Befehl weiterleiten. -.TP -\fBAttachSave 's'\fP -Aktuellen Anhang / markierte Anhänge auf speichern. -.TP -\fBAttachSelect '^J' ''\fP -Multimediaanhänge anzeigen. -.TP -\fBAttachTag 't'\fP -Einen oder mehrere Anhänge zum Speichern markieren. -.TP -\fBAttachTagPattern '='\fP -Prompts for a pattern to match. All attachments whose name/description or -content type/transfer encoding match the pattern will be tagged. -.TP -\fBAttachToggleTagged '@'\fP -Markierung der Anhänge umkehren. -.TP -\fBAttachUntag 'U'\fP -Markierung der markierten Anhängen aufheben. -.TP -\fBSearchSubjF '/'\fP -Vorwärtssuche nach Anhang. -.TP -\fBSearchSubjB '?'\fP -Rückwärtssuche nach Anhang. -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBGlobalPipe '|'\fP -Pipe Anhang an den Befehl. Verwendet den rohen Anhang, es wird keine -Dekodierung vorgenommen. -.TP -\fBShellEscape '!'\fP -Ausgang zur Shell. -.TP -\fBToggleInfoLastLine 'i'\fP -Name oder Beschreibung des Anhangs in der untersten Zeile anzeigen. -.TP -\fBHelp 'h'\fP -Hilfeseite der verfügbaren Befehle. -.TP -\fBToggleHelpDisplay 'H'\fP -Mini\-Hilfe am unterem Bildschirmrand und Posting Etikette nach dem Verfassen -eines Artikels ein\-/ausschalten (\fBbeginner_level\fP). -.RE -.\" ------------------------------------------------------------------- -.\" -.SS "POSTING VERLAUFSLISTE" -\fBDisplayPostHist\fP ('\fBW\fP') displays a list of all previous posted articles -stored in \fI${TIN_HOMEDIR:\-"$HOME"}/.tin/posted\fP. The following information -is shown: a time stamp in "dd\-mm\-yy"\-format, a single letter indicating the -action which initiated the message, the group names (eventually shortened, -see also \fBabbreviate_groupname\fP) or a mail address the message was sent to -and the subject of the message. Besides the common moving keys, the -following commands are available: -.RS 4 -.TP 10 -\fBPostedArticlesSelect '^J' ''\fP -The article with the current \*(rqMessage\-ID:\*(rq will be opened if available. -Note that this requires that the \*(rqMessage\-ID:\*(rq of the article was recorded -in \fI${TIN_HOMEDIR:\-"$HOME"}/.tin/posted\fP which may not always be the case. -If using NNTP and the internal inews (\fBinews_prog\fP set to "\-\-internal") -and either the server proposes a \*(rqMessage\-ID:\*(rq during the POST -(\fBRFC\%3977\fP) command or \fBtin\fP is built to generate \*(rqMessage\-ID:\*(rq this -should be the case. With an external inews (and reading from local spool) it -is not. -.TP -\fBSearchSubjF '/'\fP -Suche nach URL (vorwärts). -.TP -\fBSearchSubjB '?'\fP -Suche nach URL (rückwärts). -.TP -\fBSearchRepeat '\(rs'\fP -Vorherige Suche wiederholen. -.TP -\fBShellEscape '!'\fP -Ausgang zur Shell. -.TP -\fBToggleInfoLastLine 'i'\fP -Umschalten der Anzeige der aktuellen \*(rqMessage\-ID:\*(rq in der letzten Zeile. -.TP -\fBHelp 'h'\fP -Hilfeseite der verfügbaren Befehle. -.TP -\fBToggleHelpDisplay 'H'\fP -Mini\-Hilfe am unterem Bildschirmrand und Posting Etikette nach dem Verfassen -eines Artikels ein\-/ausschalten (\fBbeginner_level\fP). -.RE -.\" ------------------------------------------------------------------- -.\" -.SS "MENÜ DER GLOBALE OPTIONEN UND KONFIGURIERBAREN TINRC\-VARIABLEN" -.\" FIXME - add missing descriptions -.\" - \fI${TIN_LIBDIR:\-NEWSLIBDIR}/tinrc\fR is used -.\" in the !TIN_DEFAULTS_DIR config case -At startup, \fBtin\fP reads in the configuration files (see also \fB\%tin\fP(5)). -They contain a list of variables that can be used to configure the way -\fBtin\fP works. If it exists, the global configuration file, \fI/etc/tin/tinrc\fP -is read. After that, the user's own configuration file is read from -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP. The global file is useful for -distributing system\-wide defaults to new users who have no private tinrc -yet. -.PP -The variables are user configurable by editing -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP directly. Most of them can also be set -in the GLOBAL OPTIONS MENU which is accessed by pressing \fBOptionMenu\fP -('\fBM\fP') at all levels. It allows the user to customize the behavior of -\fBtin\fP. The options are saved to the file -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP when you exit \fBtin\fP so don't edit the -file directly whilst \fBtin\fP is running. -.PP -In the options menu use the cursor keys in the usual way to move around. Use -\fBConfigSelect\fP ('\fB^J\fP' or '\fB\fP') to 'open' the option you wish -to change. You will need to enter a new value or use '\fB\fP' to -toggle the available options. \fBConfigSelect\fP will save the new value, -\&'\fB\fP' will abort without saving changes. -.PP -As with the other menus, \fBRedrawScr\fP ('\fB^L\fP') will redraw the screen. You -can use \fBSearchSubjF\fP ('\fB/\fP'), \fBSearchSubjB\fP ('\fB?\fP') and \fBSearchRepeat\fP -('\fB\(rs\fP') to search for a specific option. Use \fBQuit\fP ('\fBq\fP') to exit -the option menu and keep your changes. Use \fBQuitTin\fP ('\fBQ\fP') to exit -without keeping your changes. -.PP -The options menu provides access to the attributes menu for the current -group by the \fBConfigToggleAttrib\fP ('\fB\fP') command. Pressing -\fBConfigToggleAttrib\fP again toggles back to the options menu. For more -information see section "ATTRIBUTES MENU AND GROUP ATTRIBUTES". -.PP -The \fBConfigScopeMenu\fP ('\fBS\fP') command brings up the scopes menu. For more -information see section "SCOPES MENU". -.PP -Here is a full list of all the available variables. The name in braces is -the name of the corresponding setting in -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP. -.TP 4 -\fBLange Newsgruppennamen abkürzen (abbreviate_groupname)\fP -Falls ON werden, sofern nötig, lange Newsgruppennamen in der Auswahl\- und -Artikelebene wie folgt abgekürzt: news.software.readers \(-> -n.software.readers \(-> n.s.readers \(-> n.s.r. Voreinstellung ist -OFF. -.TP -\fBFüge gepostete Artikel zum Filter (add_posted_to_filter)\fP -Falls ON füge gepostete Artikel die einen neuen Thread einleiten zum Filter -hinzu um eventuelle Antworten hervorzuheben. Voreinstellung ist ON. -.TP -\fBFüge 'User\-Agent:'\-Kopfzeile ein (advertising)\fP -Falls ON füge 'User\-Agent:'\-Kopfzeile ein. Voreinstellung ist ON. -.TP -\fBÜbersp. multipart/alternative\-Teile (alternative_handling)\fP -Falls ON entsorge multipart/alternative Teile des Artikels -automatisch. Voreinstellung ist ON. -.TP -\fBZeichen für gelöschte Artikel (art_marked_deleted)\fP -Zeichen das anzeigt, dass ein Artikel gelöscht wurde. Voreinstellung ist -\&'D'. -.TP -\fBZeichen für Artikel im Bereich (art_marked_inrange)\fP -Zeichen mit dem angezeigt wird, dass sich ein Artikel in einem Bereich -befindet. Voreinstellung ist '#'. -.TP -\fBZeichen für wiederkehrende Artikel (art_marked_return)\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel als ungelesener -Artikel zurückkehrt, wenn die Gruppe das nächste Mal betreten -wird. Voreinstellung ist '\-'. -.TP -\fBZeichen für wichtige Artikel (art_marked_selected)\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread -automatisch ausgewählt ist (heiß). Voreinstellung ist '*'. -.TP -\fBZeichen für aktuelle Artikel (art_marked_recent)\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread neu ist -(nicht älter als X Tage). Siehe auch \fBrecent_time\fP. Voreinstellung ist ' -o'. -.TP -\fBZeichen für ungelesene Artikel (art_marked_unread)\fP -Zeichen das anzeigt, dass ein Artikel noch nicht gelesen -wurde. Voreinstellung ist '+'. -.TP -\fBZeichen für gelesene Artikel (art_marked_read)\fP -Zeichen das anzeigt, dass ein Artikel schon gelesen wurde. Voreinstellung -ist ' '. -.TP -\fBZeichen für gekillte Artikel (art_marked_killed)\fP -Zeichen das anzeigt, dass ein Artikel gekillt wurde. Voreinstellung ist -\&'K'. \fBkill_level\fP muss passend gesetzt sein. -.TP -\fBZeichen für gelesene wichtige Art. (art_marked_read_selected)\fP -Zeichen, das verwendet wird, um anzuzeigen, dass ein Artikel automatisch -ausgewählt (heiß) war, bevor er gelesen wurde. Standard ist -\&':'. \fBkill_level\fP muss entsprechend eingestellt werden. -.TP -\fBStart des MIME\-Viewers bestätigen (ask_for_metamail)\fP -Falls ON, fragt \fBtin\fP, bevor ein MIME\-Viewer (\fBmetamail_prog\fP) zum -Anzeigen von MIME\-Nachrichten verwendet wird. Dies geschieht nur, wenn ein -MIME\-Viewer festgelegt ist. Voreinstellung ist OFF. -.TP -\fBFormatanweisung für die Anhangsebene (attachment_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Anhangsebene -benutzt. Für weitere Informationen sei auf den Abschnitt "ANSICHTEN -ANPASSEN" verwiesen. Voreingestellt ist "%t%s%e%c%d". -.TP -\fBSendet Ihnen eine cc und/oder eine blinde cc autom. (auto_cc_bcc)\fP -Setzt Ihren Namen automatisch in das Feld \*(rqCc:\*(rq und/oder \*(rqBcc:\*(rq, wenn -Sie einen Artikel versenden. Die Voreinstellung ist Nein. -.TP -\fBZeige Thread mit rechter Pfeilt. an (auto_list_thread)\fP -Falls ON: Thread beim Betreten mit der rechten Cursortaste automatisch -anzeigen? Voreinstellung ist ON. -.TP -\fBAutom. Wiederverbindung zum Server (auto_reconnect)\fP -Voreinstellung ist OFF. -.TP -\fBSpeicher Artikel im Batchmode (\-S) (batch_save)\fP -Falls ON werden Artikel/Threads im Batchmode gespeichert wenn \*(rq\fB\-S\fP\*(rq oder -gemailt, wenn \*(rq\fB\-M\fP\*(rq bzw. \*(rq\fB\-N\fP\*(rq in der Kommandozeile angegeben -wurde. Voreinstellung ist ON. -.TP -\fBZeigt Mini\-Menü & Posting\-Knigge (beginner_level)\fP -Falls diese Funktion eingeschaltet ist (ON), wird am unteren Bildschirmrand -für jede Ebene ein Mini\-Menü mit den nützlichsten Befehlen -angezeigt. Außerdem wird nach dem Verfassen eines Artikels ein kurzer -Posting\-Knigge angezeigt. Standard ist ON. -.TP -\fBSpeichere NNTP Overview Daten lokal (cache_overview_files)\fP -If ON, create local copies of NNTP overview files. This can be used to -considerably speed up accessing large groups when using a slow connection. -See also "INDEX FILES". Default is OFF. -.TP -\fBCompress locally cached NNTP overview files (compress_overview_files)\fP -If ON, locally cached NNTP overview files (\fBcache_overview_files\fP) are -saved in compressed form (\fBRFC\%1952\fP). Useful to reduce local disk space -used. Default is OFF. -.TP -\fBHash\-Algorithmus für Cancel\-Lock/Cancel\-Key (cancel_lock_algo)\fP -Diesen Hash\-Algorithmus für Cancel\-Locks verwenden. Nur vorhanden falls -\fBtin\fP mit Cancel\-Lock\-Unterstützung gebaut wurde. Keiner deaktiviert die -Erzeugung von Cancel\-Locks. Gültige Werte sind Keiner, sha1, sha256 und -sha512. Voreinstellung ist sha1. Siehe auch -\fI${TIN_HOMEDIR:\-"$HOME"}/.cancelsecret\fP in \fB\%tin\fP(5). -.TP -\fBCatchup der Gruppen beim Beenden (catchup_read_groups)\fP -.\" -.\" FIXME - I leave this to someone who's using colors -Falls auf ON gestellt, wird der Benutzer beim Beenden gefragt, ob alle -während der aktuellen Sitzung gelesenen Gruppen als gelesen markiert werden -sollen. Voreinstellung ist OFF. -.TP -\fBStandard Hintergrundfarbe (col_back)\fP -Standard Hintergrundfarbe -.TP -\fBFarbe des Fremdzitat\-Textes (col_extquote)\fP -Farbe des Fremdzitat\-Textes -.TP -\fBFarbe des Autors (From:) (col_from)\fP -Farbe des Autors (From:) -.TP -\fBFarbe der Artikelheaderzeilen (col_head)\fP -Farbe der Artikelheaderzeilen -.TP -\fBFarbe des Hilfstext (col_help)\fP -Farbe des Hilfstext -.TP -\fBFarbe des inversen Text (Hinterg.) (col_invers_bg)\fP -Hintergrundfarbe für inversen Text -.TP -\fBFarbe des inversen Text (Vordergr.) (col_invers_fg)\fP -Vordergrundfarbe für inversen Text -.TP -\fBFarbe der Statusmeldungen (col_message)\fP -Farbe der Statusmeldungen in der letzten Zeile -.TP -\fBFarbe der Hervorhebung _Striche_ (col_markdash)\fP -Farbe der hervorgehobenen Wörter wie _hier_. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBFarbe der Hervorhebung /Schrägstr./ (col_markslash)\fP -Farbe der hervorgehobenen Wörter wie /hier/. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBFarbe der Hervorhebung *Sterne* (col_markstar)\fP -Farbe der hervorgehobenen Wörter wie *hier*. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBFarbe der Hervorhebung \-Durchstr.\- (col_markstroke)\fP -Farbe der hervorgehobenen Wörter wie \-hier\-. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBFarbe des Minihilfemenü (col_minihelp)\fP -Farbe des Minihilfemenü -.TP -\fBFarbe des angezeigten Headers (col_newsheaders)\fP -Farbe des angezeigten Headers -.TP -\fBStandard Vordergrundfarbe (col_normal)\fP -Standard Vordergrundfarbe -.TP -\fBFarbe der zitierten Zeilen (col_quote)\fP -Farbe der zitierten Zeilen -.TP -\fBFarbe von zweifach zitierten Zeilen (col_quote2)\fP -Farbe von zweifach zitierten Zeilen -.TP -\fBFarbe von =>3\-fach zitierten Zeilen (col_quote3)\fP -Farbe von =>3\-fach zitierten Zeilen -.TP -\fBFarbe des Antwortzählers (col_response)\fP -Farbe des Antwortzählers. Das ist der Text "Antwort x von y" im -Artikel\-Viewer. -.TP -\fBFarbe von Signaturen (col_signature)\fP -Farbe von Signaturen -.TP -\fBFarbe negativer Bewertung (col_score_neg)\fP -Farbe negativer Bewertung -.TP -\fBFarbe positiver Bewertung (col_score_pos)\fP -Farbe positiver Bewertung -.TP -\fBFarbe der hervorgehobenen URLs (col_urls)\fP -Farbe der hervorgehobenen URLs -.TP -\fBFarbe des wortgetreu darzustellenden Textes (col_verbatim)\fP -Farbe des wortgetreu darzustellenden Textes -.TP -\fBFarbe der Subjectzeile (col_subject)\fP -Farbe der Subjectzeile -.TP -\fBFarbe der Textzeilen (col_text)\fP -Farbe der Textzeilen -.TP -\fBFarbe des Hilfe/Mail\-Zeichens (col_title)\fP -Farbe des Hilfe/Mail\-Zeichens -.TP -\fBBestätigung erforderlich für (confirm_choice)\fP -Vorsichtshalber um Bestätigung bitten. -.RS +.5i -.IP \(bu 3 -.\" TODO: check if all affected commands are marked [after confirmation] -\fBcommands\fP Ask for confirmation before executing certain dangerous commands -(e.g., \fBCatchup\fP ('\fBc\fP')). Commands that this affects are marked in this -manual with '[after confirmation]'. Default is commands & quit. -.IP \(bu -\fBquit\fP Sie werden aufgefordert, zu bestätigen, dass Sie \fBtin\fP beenden -möchten, wenn Sie den Befehl \fBQuit\fP ('\fBq\fP') verwenden. -.IP \(bu -\fBselect\fP Bitten Sie um Bestätigung, bevor Sie alle nicht ausgewählten -Artikel (mit dem Befehl \fBGroupMarkUnselArtRead\fP ('\fBX\fP')) als gelesen -markieren. -.RE -.TP -\fBDatums Format\-Zeichenkette (date_format)\fP -.\" -.\" most of these default_* settings are not available from the menu -.\" as they are intended for internal use only. -Format string \fBtin\fP uses for date representation. A description of the -different format options can be found at \fB\%strftime\fP(3). \fBtin\fP uses -\fB\%strftime\fP(3) when available and supports most format options in his -fallback code. Default is "%a, %d %b %Y %H:%M:%S". -.TP -\fB(default_art_search)\fP -.TP -\fB(default_author_search)\fP -.TP -\fB(default_config_search)\fP -Der letzte Artikel/Autor/Konfigurationsoption, nach dem gesucht wurde. -.TP -\fB(default_filter_days)\fP -Voreinstellung ist 28. -.TP -\fB(default_filter_kill_case)\fP -Standard für schnellen (1 Taste) Kill\-Filter. ON = Groß\-/Kleinschreibung -berücksichtigen, OFF = Groß\-/Kleinschreibung ignorieren. -.TP -\fB(default_filter_kill_expire)\fP -Standard für schnellen (1\-Taste) Kill\-Filter\-Ablauf. ON = auf -\fBdefault_filter_days\fP begrenzen, OFF = niemals ablaufen. Standard ist OFF. -.TP -\fB(default_filter_kill_global)\fP -Standard für schnellen (1\-Taste) Kill\-Filter global. ON = auf alle Gruppen -anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON. -.TP -\fB(default_filter_kill_header)\fP -Voreinstellung für Schnell (1 Tasten) Killfilter Header. -.RS +.5i -.IP 0 3 -\%\*(rqSubject:\*(rq (Groß/Kleinschreibung beachten) -.IP 1 -\%\*(rqSubject:\*(rq (Groß/Kleinschreibung ignorieren) -.IP 2 -\%\*(rqFrom:\*(rq (Groß/Kleinschreibung beachten) -.IP 3 -\%\*(rqFrom:\*(rq (Groß/Kleinschreibung ignorieren) -.IP 4 -\%\*(rqMessage\-ID:\*(rq & alle \*(rqReferences:\*(rq Einträge -.IP 5 -\%\*(rqMessage\-ID:\*(rq & letzter \*(rqReferences:\*(rq Eintrag -.IP 6 -\%\*(rqMessage\-ID:\*(rq allein -.IP 7 -\%\*(rqLines:\*(rq -.RE -.TP -\fB(default_filter_select_case)\fP -Standard für den schnellen (1 Taste) automatischen Auswahlfilter. EIN = -Groß\-/Kleinschreibung berücksichtigen, AUS = Groß\-/Kleinschreibung -ignorieren. -.TP -\fB(default_filter_select_expire)\fP -Standard für schnellen (1\-Taste) Auto\-Auswahlfilter\-Ablauf. ON = auf -\fBdefault_filter_days\fP begrenzen, OFF = niemals ablaufen. Standard ist OFF. -.TP -\fB(default_filter_select_global)\fP -Standard für schnellen (1\-Taste) Auto\-Auswahlfilter global. ON = auf alle -Gruppen anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON. -.TP -\fB(default_filter_select_header)\fP -Standardheader für den Filter mit schneller automatischer Auswahl (1 Taste). -.RS +.5i -.IP 0 3 -\%\*(rqSubject:\*(rq (Groß/Kleinschreibung beachten) -.IP 1 -\%\*(rqSubject:\*(rq (Groß/Kleinschreibung ignorieren) -.IP 2 -\%\*(rqFrom:\*(rq (Groß/Kleinschreibung beachten) -.IP 3 -\%\*(rqFrom:\*(rq (Groß/Kleinschreibung ignorieren) -.IP 4 -\%\*(rqMessage\-ID:\*(rq & alle \*(rqReferences:\*(rq Einträge -.IP 5 -\%\*(rqMessage\-ID:\*(rq & letzter \*(rqReferences:\*(rq Eintrag -.IP 6 -\%\*(rqMessage\-ID:\*(rq allein -.IP 7 -\%\*(rqLines:\*(rq -.RE -.TP -\fB(default_goto_group)\fP -.TP -\fB(default_group_search)\fP -.TP -\fB(default_mail_address)\fP -.TP -\fB(default_move_group)\fP -.TP -\fB(default_pattern)\fP -.TP -\fB(default_pipe_command)\fP -.TP -\fB(default_post_newsgroups)\fP -.TP -\fB(default_post_subject)\fP -.TP -\fB(default_range_group)\fP -.TP -\fB(default_range_select)\fP -.TP -\fB(default_range_thread)\fP -.TP -\fB(default_repost_group)\fP -.TP -\fB(default_save_file)\fP -.TP -\fB(default_save_mode)\fP -.TP -\fB(default_select_pattern)\fP -.TP -\fB(default_shell_command)\fP -.TP -\fB(default_subject_search)\fP -.TP -\fBKeine Worttrennungen beim Umbrechen (dont_break_words)\fP -Lange Zeilen nicht innerhalb eines Wortes Umrechen. Dies gilt für den -Artikelkörper mit Ausnahme von wortgetreuen Blöcken. Siehe auch -\fBwrap_column\fP. Die Voreinstellung ist OFF. -.TP -\fBZeige \(-> anstatt einer Markierung (draw_arrow)\fP -Ermöglicht die Auswahl von Gruppen/Artikeln mit einem Pfeil '\(->', wenn -aktiviert, oder durch eine hervorgehobene Leiste, wenn deaktiviert. Der -Standardwert ist OFF. -.TP -\fBAufruf Ihres Editors (editor_format)\fP -The format string used to create the editor start command with parameters. -Default is '%E +%N %F' with %E=Editor, %N=Linenumber and %F=Filename (e.g., -/bin/vi +7 .article). See also $\fBVISUAL\fP and $\fBEDITOR\fP under -"ENVIRONMENT". -.TP -\fBFremdzitate erkennen (extquote_handling)\fP -Falls ON werden Fremdzitate in Artikeln erkannt. Voreinstellung ist ON. -.TP -\fBRegulärer Ausd. für Zeilen mit Fremdzitaten (extquote_regex)\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_extquote\fP. If \fBextquote_regex\fP is blank, -then \fBtin\fP uses a built\-in default. -.TP -\fBAnzeigeauffrischung nach Kommandos (force_screen_redraw)\fP -Legt fest, ob nach bestimmten externen Befehlen immer ein Neuaufbau des -Bildschirms durchgeführt werden soll. Standard ist OFF. -.TP -\fBAnzahl der zu holenden Artikel (getart_limit)\fP -If \fBgetart_limit\fP is > 0 not more than the last \fBgetart_limit\fP -articles/group are fetched from the server. If \fBgetart_limit\fP is < 0 -\fBtin\fP will start fetching articles from your first unread minus absolute -value of \fBgetart_limit\fP. Default is 0, which means no limit. -.TP -\fBCatchup der Gruppe mit l. Cursor (group_catchup_on_exit)\fP -Falls ON: Catchup (als gelesen markieren) der Gruppe beim Verlassen mit der -linken Cursortaste. Voreinstellung ist ON. -.TP -\fBFormatanweisung für die Gruppenebene (group_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Gruppenebene -benutzt. Für weitere Informationen sei auf den Abschnitt "ANSICHTEN -ANPASSEN" verwiesen. Voreingestellt ist "%n\ %m\ %R\ %L\ \ %s\ \ %F". -.TP -\fBZum nächsten ungelesenen Artikel... (goto_next_unread)\fP -Which keys \fBtin\fP should accept to jump to the next unread article. -Possible is any combination of \fBPageDown\fP and \fBPageNextUnread\fP. When -\fBPageDown\fP is set \fBtin\fP jumps to the next article at the end of the -current one. When \fBPageNextUnread\fP is set \fBtin\fP jumps immediately to the -next article when \fBPageNextUnread\fP ('\fB\fP') is -pressed. Default is \fBPageNextUnread\fP. -.TP -\fBZeige uue\-Teile als Anhang (hide_uue)\fP -Falls auf 'Nein' gesetzt, werden die Rohdaten im uuencoded Format -angezeigt. Wenn auf 'Ja' gesetzt, werden Abschnitte von uuencoded Daten mit -einer einzigen Tag\-Zeile angezeigt, die die Größe und den Dateinamen zeigt -(ähnlich wie ein MIME\-Anhang). Falls auf 'Alle ausblenden' gesetzt, wird -jede Zeile, die wie uuencoded Daten aussieht, in eine Tag\-Zeile -umgewandelt. Dies ist nützlich, wenn uuencoded Daten über mehr als einen -Artikel verteilt sind, kann aber auch zu falschen Positiven führen. Diese -Einstellung kann auch im Artikelbetrachter umgeschaltet werden. Der -Standardwert ist 'Nein'. -.TP -\fBExternes inews\-Programm (inews_prog)\fP -Pfad, Name und Optionen des externen \fB\%inews\fP(1). Wenn Sie über NNTP -lesen, ist der Standardwert "\-\-internal" (verwende eingebautes NNTP inews), -ansonsten ist es "inews \-h". Der Artikel wird mittels '< Artikel' an -\fBinews_prog\fP via STDIN übergeben. -.TP -\fB(info_in_last_line)\fP -.\" this is missing from the Menu -Wenn ON, zeigen Sie die aktuelle Gruppenbeschreibung oder den Artikelbereich -in der letzten Zeile an (nicht im Pager und im globalen Menü) \(em -\fBToggleInfoLastLine\fP ('\fBi\fP') wechselt die Einstellung. Diese Funktion ist -nützlich, da die volle Breite des Bildschirms zur Verfügung steht, um lange -Betreffzeilen anzuzeigen. Voreinstellung ist OFF. -.TP -\fBBenutze interaktives Mailprogramm (interactive_mailer)\fP -Interactive mailreader: if greater than 0 your mailreader will be invoked -earlier for reply so you can use more of its features (e.g., MIME, pgp, -\&...). 1 means include headers, 2 means don't include headers (old -use_mailreader_i=ON option). 0 turns off usage. This option has to suit -\fBmailer_format\fP. Default is 0. -.TP -.\" TODO: fix menu description -.\" mono_mark* currently do allow "Reverse video" even if -.\" inverse_okay=FALSE -\fBInverse Darstellung für die Header (inverse_okay)\fP -Falls ON: inverse Darstellung für Header und das Hervorheben von URLs -benutzen. Voreinstellung ist ON. -.TP -\fBHalte Fehlschl. in ~/dead.articles (keep_dead_articles)\fP -Wenn ON, alle fehlgeschlagenen Beiträge in -\fI${TIN_HOMEDIR:\-"$HOME"}/dead.articles\fP behalten, zusätzlich zum Speichern -des letzten fehlgeschlagenen Beitrags in -\fI${TIN_HOMEDIR:\-"$HOME"}/dead.article\fP. Die Voreinstellung ist ON. -.TP -\fBFilter (kill) anwenden auf (kill_level)\fP -This option controls the processing and display of articles that are -killed. There are 3 options: -.RS +.5i -.IP 0 3 -\fBKill only unread arts\fP is the 'traditional' behavior of \fBtin\fP. Only -unread articles are killed once only by marking them read. As filtering only -happens on unread articles with \fBkill_level\fP set to 0, \fBart_marked_killed\fP -and \fBart_marked_read_selected\fP are only shown once. When you reenter the -group the mark will be gone. -.IP 1 -\fBKillt alle Artikel, markiert mit K\fP wird auf alle Artikel in der Gruppe -angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls -diese Option verwendet wird. Gelöschte Artikel werden wie gewohnt in Threads -angezeigt, sind jedoch mit \fBart_marked_killed\fP markiert. -.IP 2 -\fBKillt alle Artikel, zeigt sie nie\fP wird alle Artikel in der Gruppe -angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls -diese Option verwendet wird. Gelöschte Artikel werden überhaupt nicht -angezeigt. -.RE -Voreinstellung ist 0 (\fBKillt nur ungelesene Artikel\fP). -.TP -\fBBenutze 8bit Zeichen im Mail Header (mail_8bit_header)\fP -Erlaubt unkodierte 8\-Bit\-Zeichen im Header von E\-Mail\-Nachrichten. Der -Standardwert ist OFF. Das Aktivieren hat nur Wirkung, wenn -\fBmail_mime_encoding\fP auch auf 8bit gesetzt ist. Das Beibehalten auf OFF ist -für die meisten Benutzer sicher und entspricht dem Internet Mail Standard -(\fBRFC\%5322\fP und \fBRFC\%2047\fP). Die Voreinstellung ist OFF. -.TP -\fBMailadresse (und Name) (mail_address)\fP -E\-Mail\-Adresse des Benutzers (und vollständiger Name), falls nicht -benutzername@host. Wird beim Erstellen von Artikeln, beim Versenden von -E\-Mails und beim Signieren mit \fB\%pgp\fP(1) / \fB\%gpg\fP(1) (\fBRFC\%4880\fP) -verwendet. -.TP -\fBMIME\-Kodierung für E\-Mails (mail_mime_encoding)\fP -MIME\-Kodierung des Textkörpers in E\-Mail\-Nachrichten falls erforderlich -(8bit, base64, quoted\-printable, 7bit). Voreinstellung ist quoted\-printable. -.TP -\fBEinleitungszeile bei Mailantwort (mail_quote_format)\fP -Format der Einleitungszeile für Mailantworten (%A=Mailadresse, %D=Datum, -%F=Name und Adresse, %G=Name der Gruppe, %M=Message\-ID, %N=Name des Autors, -%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere -Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist "In article -%M you wrote:". -.TP -\fBMailbox\-Format (mailbox_format)\fP -Select one of the following mailbox\-formats: MBOXO (default, except on SCO), -MBOXRD or MMDF (default on SCO). See \fB\%mbox\fP(5) and \fBRFC\%4155\fP for more -details on MBOXO and MBOXRD and \fB\%mmdf\fP(5) for more details about MMDF. -.TP -\fBMail Verzeichnis (maildir)\fP -The directory where articles/threads are to be saved in \fB\%mbox\fP(5) -format. This feature is mainly for use with the \fB\%mutt\fP(1) mail -program. It allows the user to save articles/threads/groups simply by giving -\&'=' as the filename to save to. Default is \fI${TIN_HOMEDIR:\-"$HOME"}/Mail\fP. -.TP -\fBAufruf Ihres Mailkommandos (mailer_format)\fP -The format string used to create the mailer command with parameters that is -used for mailing articles to other people. Default is '%M "%T" < %F' -(e.g., /bin/mail "iain" < ~/.article). The flexible format allows other -mailers with different command line parameters to be used such as -.in +.3i -.nf -sendmail \-oem \-t < %F -mutt \-H %F -claws\-mail \-\-compose "mailto:%T?subject=%S&insert=%F" -.fi -.in -0.3i -\fBinteractive_mailer\fP muss passend dazu gesetzt sein. Folgende Ersetzungen -werden unterstützt: -.in +.3i -.nf -.ta \w'%S'u +\w'default_mailer'u -%F Dateiname -%M default_mailer -%S Subject\-Feld -%T To\-Feld -%U Benutzername -%% % -.fi -.in -0.3i -.TP -\&\fB'Art. (un)gelesen markieren' ignorie... (mark_ignore_tags)\fP -When this is ON, the \fBGroupMarkThdRead\fP ('\fBK\fP'), \fBThreadMarkArtRead\fP -('\fBK\fP'), \fBMarkThdUnread\fP ('\fBZ\fP') at Group level and \fBMarkArtUnread\fP -('\fBz\fP') at Thread level functions mark just the current article or thread, -ignoring other tagged, (un)read articles. When OFF, the same function -presents a menu with choices of the current thread or article, all tagged, -unread articles, or nothing. -.TP -\fBMark. gesp. Artikel/Threads gelesen (mark_saved_read)\fP -Falls ON werden gespeicherte Artikel als gelesen markiert. Voreinstellung -ist ON. -.TP -\fBMIME\-Viewer (metamail_prog)\fP -Path, name and options of external \fB\%metamail\fP(1) program used to view -non\-textual parts of articles. To use the built\-in viewer, set to -\-\-internal. This is the default value when \fB\%metamail\fP(1) is not -installed. Leave it blank if you don't want any automatic viewing of -non\-textual attachments. The \fBPageViewAttach\fP ('\fBV\fP') command can always -be used to manually view any attachments. See also \fBask_for_metamail\fP. -.TP -\fBMM_CHARSET (mm_charset)\fP -Charset supported locally, which is also used for MIME header (charset -parameter and charset name in header encoding) in mail and news postings. If -\fBMIME_STRICT_CHARSET\fP is defined at compile time, text in charset other -than the value of this parameter is considered not displayable and -represented as '?'. Otherwise, all character sets are regarded as compatible -with the display. If it's not set, the value of the environment variable -$\fBMM_CHARSET\fP is used. US\-ASCII or compile\-time default is used in case -neither of them is defined. If your system supports \fB\%iconv\fP(3), or -\fB\%ucnv_*\fP(), this option is disabled and you should use -\fBmm_network_charset\fP instead. -.TP -\fBMM_NETWORK_CHARSET (mm_network_charset)\fP -Charset used for posting and MIME headers; replaces \fBmm_charset\fP. -Conversion between \fBmm_network_charset\fP and local charset (determined via -\fB\%nl_langinfo\fP(3)) is done via \fB\%iconv\fP(3), or \fB\%ucnv_*\fP(), if none -of these functions are available on your system this option is disabled and -you have to use \fBmm_charset\fP instead. \fBmm_network_charset\fP is limited to -one of the following charsets: -.in +.3i -US\-ASCII, ISO\-8859\-{1,2,3,4,5,7,9,10,13,14,15,16}, KOI8\-{R,U,RU} -EUC\-{CN,JP,KR,TW}, ISO\-2022\-{CN,CN\-EXT,JP,JP\-1,JP\-2}, Big5, UTF\-8 -.in -0.3i -Not all values might work on your system, see \fB\%iconv_open\fP(3) for more -details. If it's not set, the value of the environment variable -$\fBMM_CHARSET\fP is used. US\-ASCII or compile\-time default is used in case -neither of them is defined. -.TP -\fBHervorhebungsattr. _Unterstriche_ (mono_markdash)\fP -Character attribute of words emphasized like _this_. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBHervorhebungsattr. /Schrägstriche/ (mono_markslash)\fP -Character attribute of words emphasized like /this/. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBHervorhebungsattribute *Sterne* (mono_markstar)\fP -Character attribute of words emphasized like *this*. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBHervorhebungsattr. \-Durchstreich.\- (mono_markstroke)\fP -Character attribute of words emphasized like \-this\-. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fB(newnews)\fP -These are internal timers used by \fBtin\fP to keep track of new newsgroups. -Do not change them unless you understand what they are for. -.TP -\fBZeige diese Header\-Felder (oder *) (news_headers_to_display)\fP -Welche Header wollen Sie sehen. Wenn Sie _alle_ sehen wollen, setzen Sie ein -\&'*' als Wert ein. Dies ist die einzige Möglichkeit, um Platzhalter -(Wildcards) zu nutzen. Wenn Sie als Wert 'X\-' angeben, sehen Sie alle Header -die mit 'X\-' beginnen (wie X\-Alan oder X\-Pape). Sie können mehrere durch -Leerzeichen getrennte Werte angeben. Wenn Sie hier nichts definieren wird -diese Option deaktiviert. -.TP -\fBZeige folgende Header nicht an (news_headers_to_not_display)\fP -Genau das Gleiche wie \fBnews_headers_to_display\fP, mit der Ausnahme, das es -das Gegenteil bewirkt. Wenn Sie dachten, das X\-Header eine tolle Sachen -waren, nun aber festgestellt haben, das dort einiges überflüssiges steht, -dann könnten Sie wie folgt vorgehen: \fBnews_headers_to_display=X\-\fP -\fBnews_headers_to_not_display=X\-Alan X\-Pape\fP Wenn Sie hier nichts angeben, -wird diese Option deaktiviert. -.TP -\fBEinleitungszeile beim Antworten (news_quote_format)\fP -Format der Einleitungszeile für Newsartikel (%A=Mailadresse, %D=Datum, -%F=Name und Adresse, %G=Name der Gruppe, %M=Message\-ID, %N=Name des Autors, -%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere -Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist "%F -wrote:". -.TP -\fBNNTP\-lese Zeitlimit in Sekunden (nntp_read_timeout_secs)\fP -Time in seconds to wait for a response from the server. Default is 120. -Setting this to 0 means no timeout. As if you use the "\fB\-C\fP" option in -conjunction with a low value for \fBnntp_read_timeout_secs\fP may result in a -timeout (and disconnect in batch mode) when connecting to large servers or -entering large groups, because the timer is set when the command is sent to -the server and that needs some time to compress the large response, the -value should not be set too small. -.TP -\fBUnicode Normalisierungsart (normalization_form)\fP -Normalisierungsart die \fBtin\fP verwenden soll um die Unicode\-Eingabe zu -normalisieren. Die möglichen Werte sind: -.RS +.5i -.IP 0 3 -\fBNone\fP: keine Normalisierung -.IP 1 -\fBNFKC\fP: Kompatibilitätszerlegung, gefolgt von kanonischer Zusammensetzung -.IP 2 -\fBNFKD\fP: Kompatibilitätszerlegung -.IP 3 -\fBNFC\fP: Kanonische Zerlegung, gefolgt von kanonischer Zusammensetzung -.IP 4 -\fBNFD\fP: Kanonische Zerlegung -.IP 5 -\fBNFKC_CF\fP: Kompatibilitätszerlegung, gefolgt von kanonischer -Zusammensetzung und Faltung -.RE -Einige Normalisierungsarten sind nur verfügbar, wenn sie von der Bibliothek -unterstützt werden, die \fBtin\fP verwendet, um die Normalisierung -durchzuführen. Nach Möglichkeit sollte NFC verwendet werden (\fBRFC\%5198\fP). -.TP -\fBFormatanweisung für Mime\-Header auf Artikelebene (page_mime_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung von Mime\-Headern auf -Artikelebene benutzt. Fr weitere Informationen sei auf den Abschnitt -"ANSICHTEN ANPASSEN" verwiesen. Voreingestellt ist "[\-\- -%T%S%*n%z%*l%!c%!d%*e\-\-]". -.TP -\fBFormatanweisung für die Anzeige des UUE\-Headers auf Artikelebene (page_uue_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung von UUE\-Headern auf -Artikelebene benutzt. Für weitere Informationen sei auf den Abschnitt -"ANSICHTEN ANPASSEN" verwiesen. Voreingestellt ist "[\-\- %T%S%*n%I%!d%*e -\-\-]". -.TP -\fBSetze Cursor auf ersten ungel. Art. (pos_first_unread)\fP -Falls ON wird der Cursor auf den ersten ungelesenen Artikel in der Gruppe -gesetzt, andernfalls auf den letzten Artikel. -.TP -\fBBenutze 8bit\-Zeichen im Newsheader (post_8bit_header)\fP -Allows 8bit characters unencoded in the header of a news article, if set -this also disables the generation of MIME\-headers when they are usually -required. Default is OFF. Only enacted if \fBpost_mime_encoding\fP is also set -to 8bit. In a number of local hierarchies where 8bit characters are used, -using unencoded (raw) 8bit characters in header is acceptable and sometimes -even recommended so that you need to check the convention adopted in the -local hierarchy of your interest to determine what to do with this and -\fBpost_mime_encoding\fP. -.TP -\fBMIME\-Kodierung in Newsartikeln (post_mime_encoding)\fP -MIME encoding of the body in news message, if necessary. (8bit, base64, -quoted\-printable, 7bit). Default is 8bit, which leads to no encoding. -base64 and quoted\-printable are usually undesired on usenet. -.TP -\fBNachbearbeitete Artikel anzeigen (post_process_view)\fP -If ON, then \fBtin\fP will start an appropriate viewer program to display any -files that were post processed and uudecoded. The program is determined -using the \fB\%mailcap\fP(5) file. Default is ON. -.TP -\fBNachbearbeiten gespeichert. Artikel (post_process_type)\fP -This specifies whether to perform post processing on saved articles. -Because the shell archive may contain commands you may not want to be -executed, be careful when extracting shell archives. The following values -are allowed: -.RS +.5i -.IP 0 3 -\fBNein\fP (Voreinstellung), es wird keine Nachbearbeitung gemacht. -.IP 1 -\fBShell\-Archive\fP, Entpacken nur von mehrteiligen \fB\%shar\fP(1)\-Dateien. -.IP 2 -\fBJa\fP, binäre Anhänge und Daten werden dekodiert und gespeichert. -.RE -.TP -\fBGepostete Artikel speichern in (posted_articles_file)\fP -Keep posted articles in given file. If the given filename does not contain -any expandable strings it will be prefixed with -\fI${TIN_HOMEDIR:\-"$HOME"}/Mail/\fP. If no filename is set then postings will -not be saved. See the section "MAILING PIPING PRINTING REPOSTING AND SAVING -ARTICLES" for more information about the various expansion -characters. Default is 'posted'. -.TP -\fBAlle Header beim Drucken ausgeben (print_header)\fP -If ON, then the full article header is sent to the printer. Otherwise only -the \*(rqSubject:\*(rq and \*(rqFrom:\*(rq fields are output. Default is OFF. -.TP -\fBDruckprogramm mit Optionen (printer)\fP -The printer program with options that is to be used to print articles. The -default is \fB\%lpr\fP(1) for BSD machines and \fB\%lp\fP(1) for SysV -machines. Printing from \fBtin\fP may have been disabled by the System -Administrator. -.TP -\fBBearbeite nur ungelesene Artikel (process_only_unread)\fP -Falls ON speichere/drucke/pipe/maile nur ungelesene Artikel (markierte -Artikel ausgenommen). Voreinstellung ist OFF. -.TP -\fBLeeres Fup'2 im Editor anzeigen (prompt_followupto)\fP -Falls ON zeige leere \*(rqFollowup\-To:\*(rq\-Kopfzeile im Editor. Voreinstellung -ist OFF. -.TP -\fBZitatzeichen (quote_chars)\fP -The character used in quoting included text to article followups and mail -replies. The '_' character represents a blank character and is replaced with -\&' ' when read, %I is replaced by author's initials. If the article has -multiple addresses only the first is evaluated. Default is '>_'. -.TP -\fBZitierverhalten (quote_style)\fP -How articles should be quoted when following up or replying to them. There -are a number of things that can be done: empty lines can be quoted, -signatures can be quoted and quote_chars can be compressed when quoting -multiple times (for example, '> > >' will be turned into -\&'>>>'). The default is to compress quotes, and to quote empty -lines. -.br -When you are viewing an article in raw mode ('\fB^H\fP'), and follow up or -reply to it, the signature will be quoted even if it would otherwise not -be. If \fBshow_signatures\fP is off, then the signature will never be quoted. -.TP -\fBRegulärer Ausd. für zit. Zeilen (quote_regex)\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote\fP. If \fBquote_regex\fP is blank, then -\fBtin\fP uses a built\-in default. -.TP -\fBReg. Ausd. für zweifach zitierte Z. (quote_regex2)\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote2\fP. If \fBquote_regex2\fP is blank, then -\fBtin\fP uses a built\-in default. -.TP -\fBReg. Ausd. für >=3\-fach zitierte Z. (quote_regex3)\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote3\fP. If \fBquote_regex3\fP is blank, then -\fBtin\fP uses a built\-in default. -.TP -\fBArtikel Neuheitszeit\-Limit (recent_time)\fP -Wenn auf 0 gesetzt, ist diese Funktion deaktiviert, ansonsten bedeutet es -die Anzahl der Tage. -.TP -\fBBiDi wiedergeben (render_bidi)\fP -If ON \fBtin\fP does the rendering of bi\-directional text. If OFF \fBtin\fP leaves -the rendering of bi\-directional text to the terminal. Default is OFF. -.TP -\fBActive alle ... Sekunden neu lesen (reread_active_file_secs)\fP -The news \fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP file is -reread at regular intervals to show if any new news has arrived. Default is -1200. Setting this to 0 will disable this feature. -.TP -\fBVerz. um Art/Threads zu speichern (savedir)\fP -Verzeichnis, in dem Artikel/Threads gespeichert werden. Voreinstellung ist -\fI${TIN_HOMEDIR:\-"$HOME"}/News\fP. -.TP -\fBBewertungsgrenze (kill) (score_limit_kill)\fP -If the score of an article is below or equal this value the article gets -marked as killed. -.TP -\fBBewertungsgrenze (select) (score_limit_select)\fP -If the score of an article is above or equal this value the article gets -marked as hot. -.TP -\fBBewertung für gekillte Artikel (score_kill)\fP -Score of an article which should be killed, this must be <= -\fBscore_limit_kill\fP. -.TP -\fBBewertung für wichtige Artikel (score_select)\fP -Score of an article which should be marked hot, this must be >= -\fBscore_limit_select\fP. -.TP -\fBBlättere Artikel um ... Zeilen (scroll_lines)\fP -The number of lines that will be scrolled up/down in the article pager when -using cursor\-up/down. The default is 1 (line\-by\-line). Set to 0 to get -traditional \fBtin\fP page\-by\-page scrolling. Set to \-1 to get page\-by\-page -scrolling where the top/bottom line is carried over onto the next page. -This setting supersedes show_last_line_prev_page=ON. Set to \-2 to get -half\-page scrolling. This setting supersedes \fBfull_page_scroll\fP=OFF. -.TP -\fBFormatanweisung für die Auswahlebene (select_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Auswahlebene -benutzt. Für weitere Informationen sei auf den Abschnitt "ANSICHTEN -ANPASSEN" verwiesen. Voreingestellt ist "%f\ %n\ %U\ \ %G\ \ %d". -.TP -\fBIm Gruppen\- und Threadlevel, zeige Autor an mit (show_author)\fP -Welche Informationen über den Autor sollen angezeigt werden. Die -Voreinstellung ist 2, der vollständige Name des Autors. -.RS +.5i -.IP 0 3 -\fBNichts\fP, nur die \*(rqSubject:\*(rq Zeile wird angezeigt. -.IP 1 -\fBAddress\fP, \*(rqSubject:\*(rq line & the address part of the \*(rqFrom:\*(rq line are -displayed. -.IP 2 -\fBFull Name\fP, \*(rqSubject:\*(rq line & the authors full name part of the -\&\*(rqFrom:\*(rq line are displayed (default). -.IP 3 -\fBAddress and Name\fP, \*(rqSubject:\*(rq line & all of the \*(rqFrom:\*(rq line are -displayed. -.RE -.TP -\fBZeige Beschreibung der Newsgruppen (show_description)\fP -If ON show a short group description text after newsgroup name at the group -selection level. The \*(rq\fB\-d\fP\*(rq command\-line flag will override the setting -and turn descriptions off. The text used is taken from the -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/newsgroups\fP file and if supported (requires -\fBtin\fP to be built with mh\-mail\-handling support) from -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/mailgroups\fP for mailgroups. Default is ON. -.TP -\fBSortierfunktion (sort_function)\fP -Sortierfunktion für Artikel. Voreinstellung ist 0. -.RS +.5i -.IP 0 3 -Mit \fB\%qsort\fP(3) sortieren. -.IP 1 -Mit \fB\%heapsort\fP(3) sortieren. Kann in großen Gruppen mit langen Threads -schneller sein. -.RE -.TP -\fBZeige Hilfe/Mail\-Zeichen im Ebenentitel (show_help_mail_sign)\fP -Allows you to select whether \fBtin\fP shows a help indication, a new mail -indication, both, or neither in the various level titles. Default is 3. -.RS +.5i -.IP 0 3 -\fBKein Hilfe\- oder Mailanzeige\fP. -.IP 1 -\fBNur Hilfe anzeigen\fP. -.IP 2 -\fBShow only mail sign if new mail\fP, show only the mail sign, and only if new -mail has arrived. -.IP 3 -\fBShow mail if new mail else help s.\fP, show mail sign if new mail has -arrived otherwise show help sign. -.RE -.TP -\fBZeige nur ungelesene Artikel (show_only_unread_arts)\fP -Falls ON, werden nur neue/ungelesene Artikel angezeigt, andernfalls werden -alle Artikel angezeigt. -.TP -\fBZeige nur Gruppen mit ungel. Art. (show_only_unread_groups)\fP -Falls ON zeige nur abonnierte Gruppen mit ungelesen Artikeln. Voreinstellung -ist OFF. -.TP -\fBZeige Signaturen an (show_signatures)\fP -Falls OFF zeige keine Signaturen an. Voreinstellung ist ON. -.TP -\fBZeige Bewertung an (show_art_score)\fP -Falls ON, wird die Bewertung bei der Anzeige von Artikeln in der unteren -linken Ecke gezeigt. Voreinstellung ist OFF. Siehe auch \fBcol_score_neg\fP und -\fBcol_score_pos\fP. -.TP -\fBTrenne Sig mit '\en\-\- \en' ab (sigdashes)\fP -Falls ON, wird der Signatur ein Signaturtrenner -vorangestellt. Voreinstellung ist ON. -.TP -\fBErzeuge Signatur aus Pfad/Kommando (sigfile)\fP -The path that specifies the signature file to use when posting, following up -to or replying to an article. If the path is a directory then the signature -will be randomly generated from files that are in the specified -directory. If the path starts with a ! the program the path points to will -be executed to generate a signature. In order to pass the group name to the -program, %G can be specified. This will be replaced by the name of the -current newsgroup. \-\-none will suppress any signature. Default is -\fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP. -.TP -\fBSignatur beim Reposten anhängen (signature_repost)\fP -Falls ON wird die Signatur auch an repostete Artikel -angehängt. Voreinstellung ist ON. -.TP -\fBReg. für /Schrägst./ Hervorhebungen (slashes_regex)\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markslash\fP or \fBmono_markslash\fP. If -\fBslashes_regex\fP is blank, then \fBtin\fP uses a built\-in default. -.TP -\fBSortiere Artikel nach (sort_article_type)\fP -This specifies how articles should be sorted. Sort by ascending Date (6) is -the default. The following sort types are allowed: -.RS +.5i -.IP 0 3 -\fBNichts\fP, keine Sortierung. -.IP 1 -\fBSubject: (absteigend)\fP, Artikel absteigend nach \*(rqSubject:\*(rq sortieren. -.IP 2 -\fBSubject: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqSubject:\*(rq sortieren. -.IP 3 -\fBFrom: (absteigend)\fP, Artikel absteigend nach \*(rqFrom:\*(rq sortieren. -.IP 4 -\fBFrom: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqFrom:\*(rq sortieren. -.IP 5 -\fBDate: (absteigend)\fP, Artikel absteigend nach \*(rqDate:\*(rq sortieren. -.IP 6 -\fBDate: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqDate:\*(rq sortieren. -.IP 7 -\fBBewertung (absteigend)\fP, Artikel absteigend nach Bewertung sortieren. -.IP 8 -\fBBewertung (aufsteigend)\fP, Artikel aufsteigend nach Bewertung sortieren. -.IP 9 -\fBLines: (absteigend)\fP, Artikel absteigend nach \*(rqLines:\*(rq sortieren. -.IP 10 -\fBLines: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqLines:\*(rq sortieren. -.RE -.TP -\fBSortiere Threads nach (sort_threads_type)\fP -This specifies how threads will be sorted. Sort by descending Score (1) is -the default. The following sort types are allowed: -.RS +.5i -.IP 0 3 -\fBNichts\fP, keine Sortierung der Threads. -.IP 1 -\fBBewertung (absteigend)\fP, Threads absteigend nach Bewertung sortieren. -.IP 2 -\fBBewertung (aufsteigend)\fP, Threads aufsteigend nach Bewertung sortieren. -.IP 3 -\fBLast posting date (descending)\fP, sort threads by date of last posting -descending. -.IP 4 -\fBLast posting date (ascending)\fP, sort threads by date of last posting -ascending. -.RE -.TP -\fBSpamfallenwarnung in Adresse (spamtrap_warning_addresses)\fP -Set this option to a list of comma\-separated strings to be warned if you are -replying to an article by mail where the e\-mail address contains one of -these strings. The matching is case\-insensitive. Example: -.sp -\fIspam,delete,remove\fP -.TP -\fBRegu. A. für *Stern* Hervorhebungen (stars_regex)\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markstar\fP or \fBmono_markstar\fP. If -\fBstars_regex\fP is blank, then \fBtin\fP uses a built\-in default. -.TP -\fBLeerzeichen am Zeilenende entfernen (strip_blanks)\fP -.\" only done in select/thread level, not in group level (nor in the pager) -.\" IMHO we should remove it -Strips the blanks from the end of each line therefore speeding up the -display when reading on a slow terminal or via modem. Default is ON. -.TP -\fBLösche nicht vorhan. G. aus newsrc (strip_bogus)\fP -Bogus groups are groups that are present in your -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP file that no longer exist on the news -server. There are 3 options. 0 means do nothing & always keep bogus groups. -1 means bogus groups will be permanently removed. 2 means that bogus groups -will appear on the Group Selection Menu, prefixed with a 'D'. This allows -you to unsubscribe from them as and when you wish. Default is 0 (Always -Keep). -.TP -\fBNur abonnierte Gruppen in newsrc (strip_newsrc)\fP -If ON, then unsubscribed groups will be permanently removed from your -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP file. Default is OFF. -.TP -\fBReg. Ausd. für den Subjectanfang (strip_re_regex)\fP -A regular expression to find Subject prefixes like "Re:" to remove. If -\fBstrip_re_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBReg. Ausd. für das Subjectende (strip_was_regex)\fP -A regular expression to find Subject suffixes like "(was:" to remove. If -\fBstrip_was_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBReg. für \-Durchstr.\- Hervorhebungen (strokes_regex)\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markstroke\fP or \fBmono_markstroke\fP. If -\fBstrokes_regex\fP is blank, then \fBtin\fP uses a built\-in default. -.TP -\fBNä.ungel.\-kein Abbr. am Listenende? (wrap_on_next_unread)\fP -If enabled a search for the next unread article will wrap around all -articles to find also previous unread articles. If disabled the search stops -at the end of the thread list. Default is ON. -.TP -\fBWandle TeX\-Umlaute automatisch um (tex2iso_conv)\fP -If ON, show "a as Umlaut\-a, etc. Default is OFF. This behavior can also be -toggled in the article viewer via \fBPageToggleTex2iso\fP ('\fB"\fP'). -.TP -\fBThreade Artikel anhand (thread_articles)\fP -Defines which threading method to use. It's possible to set the threading -type on a per group basis by setting the group attribute variable -\fBthread_arts\fP to 0 \(en 4 in the file -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/attributes\fP. (See also "GROUP ATTRIBUTES".) -The default is Both Subject and References. The choices are: -.RS +.5i -.IP 0 3 -\fBNone\fP, keinen Diskussionsfaden aufbauen. -.IP 1 -\fBSubject\fP, Diskussionsfaden nur anhand von \*(rqSubject:\*(rq aufbauen. -.IP 2 -\fBReferences\fP, Diskussionsfaden nur anhand von \*(rqReferences:\*(rq aufbauen. -.IP 3 -\fBBoth Subject and References\fP, Diskussionsfaden anhand von \*(rqReferences:\*(rq -und \*(rqSubject:\*(rq aufbauen (Voreinstellung). -.IP 4 -\fBMultipart Subject\fP, Diskussionsfaden mehrteiliger Artikel anhand von -\&'Subject:\*(rq aufbauen. -.IP 5 -\fBPercentage Match\fP, thread base upon a partial character match on -\&\*(rqSubject:\*(rq. -.RE -.TP -\fBCatchup mit der linken Cursort. (thread_catchup_on_exit)\fP -Falls ON: Catchup (als gelesen markieren) der Gruppe/des Threads beim -Verlassen mit der linken Cursortaste. Voreinstellung ist ON. -.TP -\fBFormatanweisung für die Threadebene (thread_format)\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Threadebene -benutzt. Für weitere Informationen sei auf den Abschnitt "ANSICHTEN -ANPASSEN" verwiesen. Voreingestellt ist "%n\ %m\ \ [%L]\ \ %T\ \ %F". -.TP -\fBProzentualer Subject Vergleich (thread_perc)\fP -How closely the subjects must match for two threads to be considered part of -the same thread. This is a percentage and the default if 75%. -.TP -\fBBewertung eines Threads (thread_score)\fP -Wie die Gesamtpunktzahl eines Threads berechnet wird. Voreinstellung ist 0, -die maximale Punktzahl in diesem Diskussionsfaden (Thread). -.RS +.5i -.IP 0 3 -\fBMax\fP, Maximalwert im Diskussionsfaden. -.IP 1 -\fBSum\fP, Summer aller Bewertungen im Diskussionsfaden. -.IP 2 -\fBAverage\fP, Durchschnitt aller Bewertungen im Diskussionsfaden. -.RE -.TP -\fBCA\-Zertifikatsdatei (tls_ca_cert_file)\fP -The name of file containing all trusted CA certificates used for NNTPS -(\fB\%RFC8143\fP) connections. If left empty the system default will be used. -.TP -\fBVerwende Umschreibungen (translit)\fP -If ON append //TRANSLIT to the first argument of \fB\%iconv_open\fP(3) to -enable transliteration. This means that when a character cannot be -represented in the target character set, it can be approximated through one -or several similarly looking characters. On systems where this extension -doesn't exist, this option is disabled. Default is OFF. -.TP -\fBWie mit Leerzeilen umgegangen werden soll (trim_article_body)\fP -Allows you to select how \fBtin\fP treats blank lines in article bodies. -Default is 0. This option does not affect lines within verbatim blocks. -.RS +.5i -.IP 0 3 -\fBArtikelrumpf nicht anpassen\fP. -.IP 1 -\fBFührende Leerzeilen überspringen\fP. -.IP 2 -\fBAbschließende Leerzeilen überspr.\fP. -.IP 3 -\fBFühr. & abschlies. Leerz. überspr.\fP, Führende und abschließende Leerzeilen -überspringen. -.IP 4 -\fBMehrere zwischen Textblöcken zusammenfassen\fP, Leerzeilen zwischen -Textblöcken zusammenfassen. -.IP 5 -\fBMehrere zwischen Textbl. zusammenfassen + führende Leerzeilen überspringen\fP, 4 + 1; Leerzeilen zwischen Textblöcken zusammenfassen und -führende Leerzeilen überspringen. -.IP 6 -\fBMehrere zwischen Textbl. zusammenfassen + abschließende Leerz. überspringen\fP, 4 + 2; Leerzeilen zwischen Textblöcken zusammenfassen -und abschließende Leerzeilen überspringen. -.IP 7 -\fBMehrere zwischen Textbl. zusammenf. + führende/abschließende Leerz. überspr.\fP, 4 + 3; Leerzeilen zwischen Textblöcken zusammenfassen und -führende sowie abschließende Leerzeilen überspringen -.RE -.TP -\fBWeiche Bindestriche unterdrücken (suppress_soft_hyphens)\fP -If ON remove soft hyphens in non verbatim blocks of articles in UTF\-8 when -they are displayed in a UTF\-8 locale. The character SOFT HYPHEN (U+00AD) is -an invisible format character that merely indicates a preferred intraword -line break position. However, some terminal emulators display a space or a -hyphen, for example, in the place of the soft hyphen. This setting can be -used to improve the display of those articles. Default is OFF. -.TP -\fBReg. für _Unterstr._ Hervorhebungen (underscores_regex)\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markdash\fP or \fBmono_markdash\fP. If -\fBunderscores_regex\fP is blank, then \fBtin\fP uses a built\-in default. -.TP -\fBEntferne ~/.article nach dem posten (unlink_article)\fP -Falls ON entferne ~/.article nach dem posten. Voreinstellung ist ON. -.TP -\fBÖffne URLs mit ... (url_handler)\fP -The program that will be run when launching URLs in the article viewer using -\fBPageViewUrl\fP ('\fBU\fP'). The actual URL will be appended. Default is -\fBurl_handler.pl\fP. -.TP -\fBURL\-Hervorhebung im Artikel (url_highlight)\fP -Aktivieren der URL\-Hervorhebung im Artikel. Voreinstellung ist ON. -.TP -\fBBenutze ANSI\-Farben (use_color)\fP -ANSI\-Farben in \fBtin\fP benutzen. Voreinstellung ist OFF. -.TP -\fBScrollt. vom Nummernblock nutzen (use_keypad)\fP -Voreinstellung ist OFF. -.TP -\fBMaus in xterm nutzen (use_mouse)\fP -Allows the mouse button support in an \fB\%xterm\fP(1x) to be -enabled/disabled. Default is OFF. -.TP -\&\fB\*(rqX\-Face:\*(rqs mit slrnface Anzeigen (use_slrnface)\fP -If enabled \fBtin\fP uses \fB\%slrnface\fP(1) to interpret the \*(rqX\-Face:\*(rq -header. For this option to have any effect, \fBtin\fP must be running in an -\fB\%xterm\fP(1x) and \fB\%slrnface\fP(1) must be in your $\fBPATH\fP. Default is -OFF. -.TP -\fBUTF\-8\-Grafik benutzten (utf8_graphics)\fP -If ON use UTF\-8 characters for indicator ('\(->'), thread/attachment -tree and ellipsis ('...'). Default is OFF. -.TP -\fBReg. Ausd. für den Anfang e. wortgetreuen Textblock (verbatim_begin_regex)\fP -Ein regulärer Ausdruck, der den Beginn eines wortgetreu wiederzugebenden -Absatzes findet. -.TP -\fBReg. Ausd. für das Ende eines wortgetreuen Textblocks (verbatim_end_regex)\fP -Ein regulärer Ausdruck, der das Ende eines wortgetreu wiederzugebenden -Absatzes findet. -.TP -\fBWortgetreue Textblöcke erkennen (verbatim_handling)\fP -Falls ON werden wortgetreue Textblöcke in Artikeln erkannt. Voreinstellung -ist ON. -.TP -\fBPlatzhalter\-Übereinstimmung (wildcard)\fP -Allows you to select how \fBtin\fP matches strings. The default is 0 and uses -the \fB\%wildmat\fP(3) notation, which is how this has traditionally been -handled. Setting this to 1 allows you to use \fB\%perl\fP(1) compatible -regular expressions \fB\%pcre\fP(3) or \fB\%pcre2\fP(3) (see also \fB\%perlre\fP(1) -and \fB\%pcrepattern\fP(3) or \fB\%pcre2pattern\fP(3)). You will probably want -to update your filter file if you use this regularly. NB: Newsgroup names -will always be matched using the \fB\%wildmat\fP(3) notation. -.TP -\fBAnstelle der Markierung anzeigen (word_h_display_marks)\fP -Should the leading and ending stars, slashes, strokes and dashes also be -displayed, even when they are highlighting marks? -.RS +.5i -.IP 0 3 -\fBnein\fP -.IP 1 -ja, \fBMarkierung\fP anzeigen -.IP 2 -ein \fBLeerzeichen\fP ausgeben -.RE -.TP -\fBWort\-Hervorhebung im Artikel (word_highlight)\fP -Enable word highlighting. See \fBword_h_display_marks\fP for the options -available. If \fBuse_color\fP is enabled the colors specified in -\fBcol_markdash\fP, \fBcol_markslash\fP, \fBcol_markstar\fP and \fBcol_markstroke\fP are -used for word highlighting else the character attributes specified in -\fBmono_markdash\fP, \fBmono_markslash\fP, \fBmono_markstar\fP and \fBmono_markstroke\fP -are used. Default is ON. -.TP -\fBZeilen umbrechen nach (wrap_column)\fP -Sets the column at which a displayed article body should be wrapped. If -this value is equal to 0, it defaults to the current screen width. If this -value is greater than your current screen width and \fBdont_break_words\fP is -unset the part off\-screen is not displayed. Thus setting this option to a -large value can be used to disable wrapping. If this value is negative the -wrap margin is the current screen width plus the given value (as long as the -result is still positive, otherwise it will fall back to the current screen -width). Default is 0, wrapping at the current screen width. -.TP -\fBEinleitungszeile beim Crossposten (xpost_quote_format)\fP -.\" -.\" -Format ist das gleiche wie für \fBnews_quote_format\fP, dies wird verwendet, -wenn auf ein Crossposting in mehrere Gruppen geantwortet wird, ohne dass ein -\&\*(rqFollowup\-To:\*(rq angegeben ist. -.SS "ATTRIBUTE UND GRUPPENATTRIBUTE MENÜ" -\fBtin\fP allows certain attributes to be set on a per group basis. If it -exists, the global attributes file, \fI${TIN_LIBDIR:\-NEWSLIBDIR}/attributes\fP -is read. After that, the user's own attributes file -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/attributes\fP is read. The global attributes -file is useful for distributing system\-wide defaults to new users who have -no private attributes file yet. -.PP -Note that the \fIscope=\fP line has to be specified before -the attributes are specified for that list. All attributes are set to a -reasonable default so you only have to specify the attribute that you want -to change (e.g., \fBsavedir\fP). All toggle attributes are set by specifying -ON/OFF. Otherwise, these function exactly the same as their global -equivalents. For more details see \fB\%tin\fP(5). -.PP -Attributes can also be changed from the attributes menu which can be -accessed by \fBConfigToggleAttrib\fP ('\fB\fP') from the options menu -or \fBScopeSelect\fP ('\fB^J\fP' or '\fB\fP') from the scopes menu. The -attributes menu looks and behaves very similar to the options menu. The -title shows the current scope. Attributes set in the current scope are -marked with '+' to the left of the attributes number. -.PP -.\" -.\" -Besides the keys for moving around and changing values known from the -options menu the attributes menu provides the following command: -\fBConfigResetAttrib\fP ('\fBr\fP') which resets an attribute to a default value. -.SS GÜLTIGKEITSBEREICHS\-MENÜ -The scopes menu (accessible from the options menu with \fBConfigScopeMenu\fP -('\fBS\fP')) shows all scopes read from the global and local attributes file. -Scopes from the global attributes file are marked with '!\&' to the left of -the scope number. Delete/rename/move are not possible with those scopes. -.PP -.\" -.\" -In addition to the common moving keys the following commands are available: -\fBScopeSelect\fP ('\fB^J\fP' or '\fB\fP') enter the attributes menu for -the current scope, \fBScopeEditAttributesFile\fP ('\fBE\fP') edit the local -attributes file, \fBScopeAdd\fP ('\fBa\fP') add a new scope, \fBScopeDelete\fP -('\fBd\fP') delete the current scope, \fBScopeMove\fP ('\fBm\fP') move the current -scope to a new position, \fBScopeRename\fP ('\fBr\fP') rename the current -scope. \fBToggleHelpDisplay\fP ('\fBH\fP') toggles the help mini menu at the -bottom of the screen and posting etiquette after composing an article -(\fBbeginner_level\fP). -.SS "FILTERN VON ARTIKELN" -.\" FIXME - add scoring description -When there is a subject or an author which you are either very interested -in, or find completely uninteresting, you can easily instruct \fBtin\fP to -\fIauto\-select\fP or \fIauto\-kill\fP articles that match \fIrules\fP that you -specify. This can be anything from the name of the author to the number of -lines in an article. -.PP -When \fBtin\fP starts up the user's kill\-file -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/filter\fP or the file specified via \*(rq\fB\-F\fP\*(rq -is read (see also \fB\%tin\fP(5) ). Each time a newsgroup is entered the rules -are applied and articles killed or selected when they meet certain criteria. -.PP -The degree to which rules are applied depend on the \fBkill_level\fP tinrc -setting. By default killed articles will only be marked read. Adjust -\fBkill_level\fP for more aggressive processing. Articles that match an -auto\-selection rule are marked with a \*(rq*\*(rq. -.PP -Filtering rules can be manually entered into -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/filter\fP (but don't do this whilst running -\fBtin\fP else you will lose your changes) or by using an on\-screen menu within -\fBtin\fP. -.PP -The filtering capabilities of \fBtin\fP have been significantly enhanced over -previous versions to include scoring and better pattern matching. It is -recommended that you read the file \fIfiltering\fP in the \fBtin\fP documentation -directory. This file can also be read online at -.br -. -.PP -.\" FIXME - Next paragraph is out of date -.\" -.\" -The on\-screen filtering menu is accessed by pressing \fBMenuFilterKill\fP -('\fB^K\fP') or \fBMenuFilterSelect\fP ('\fB^A\fP') at the Group and Article -levels. It allows the user to kill or select an article that matches the -current \*(rqSubject:\*(rq line, \*(rqFrom:\*(rq line or a string entered by the -user. The user entered string can be applied to the \&\*(rqSubject:\*(rq or -\&\*(rqFrom:\*(rq line of an article. The filter can be limited to the current -newsgroup or it can apply to all newsgroups. Once entered the user can abort -the command and not save the new filter, edit the full filter file or save -filter. -.SS "ARTIKEL POSTEN" -\fBtin\fP allows posting of articles, follow\-up to already posted articles and -replying direct through mail to the author of an article. -.PP -Use the \fBPost\fP ('\fBw\fP') command to post an article to a newsgroup. After -entering the post subject the default editor (i.e., \fB\%vi\fP(1)) or the -editor specified by the $\fBVISUAL\fP or $\fBEDITOR\fP environment variable will -be started and the article can be entered. To crosspost articles simply add -a comma and the name of the newsgroup(s) to the end of the \*(rqNewsgroups:\*(rq -line at the beginning of the article. After saving and exiting the editor -you are asked if you wish to a)bort posting the article, e)dit the article -again or p)ost the article to the specified newsgroup(s). -.PP -Verwenden Sie den Befehl \fBDisplayPostHist\fP ('\fBW\fP'), um eine Verlaufsliste -der von Ihnen geposteten Artikel anzuzeigen. Angezeigt werden das Datum, an -dem der Artikel gepostet wurde, in welchen Newsgruppen der Artikel gepostet -wurde und die Subjectzeile des Artikels. Weitere Informationen finden Sie im -Abschnitt "POSTING VERLAUFSLISTE". -.PP -Use the \fBPageFollowupQuote\fP ('\fBf\fP'), \fBPageFollowup\fP ('\fBF\fP') or -\fBPageFollowupQuoteHeaders\fP ('\fB^W\fP') command to post a follow\-up article to -an already posted article. The \fBPageFollowupQuote\fP command will copy the -text of the original article into the editor. The -\fBPageFollowupQuoteHeaders\fP command will copy the text and all headers of -the original article into the editor. The editing procedure is the same as -when posting an article with the \fBPost\fP ('\fBw\fP') command. -.PP -.\" -.\" -Use the \fBPageReplyQuote\fP ('\fBr\fP'), \fBPageReply\fP ('\fBR\fP') or -\fBPageReplyQuoteHeaders\fP ('\fB^E\fP') command to reply direct through mail to -the author of an already posted article. The \fBPageReplyQuote\fP command will -copy the text of the original article into the editor. The -\fBPageReplyQuoteHeaders\fP command will copy the text and all headers of the -original article into the editor. The editing procedure is the same as when -posting an article with the \fBPost\fP ('\fBw\fP') command. After saving and -exiting the editor you are asked if you wish to abort sending the article -via \fBPostAbort\fP ('\fBa\fP'), edit the article again via \fBPostEdit\fP ('\fBe\fP') -or send the article to the author via \fBPostSend\fP ('\fBs\fP'). -.SS "EINLEITUNGSZEILE ANPASSEN" -When posting a followup to an article or replying direct to the author of an -article via email the text of the article can be quoted. The beginning of -the quoted text can contain information about the quoted article (e.g., Name -and the Message\-ID of the article). If the article has multiple addresses -only the first is evaluated. To allow for different situations certain -information from the article can be used in the quoted string. The following -variables are expanded if found in the tinrc variables \fBmail_quote_format\fP, -\fBnews_quote_format\fP or \fBxpost_quote_format\fP: -.RS -.nf -.ta \w'%A 'u +\w'Mailadresse'u -\fB%A\fP Mailadresse -\fB%D\fP Datum (benutzt \fBdate_format\fP) -\fB%F\fP Name und Adresse (%N <%A>) -\fB%G\fP Name der Gruppe -\fB%M\fP Message\-ID -\fB%N\fP Name des Autors -\fB%C\fP Vorname des Autors -\fB%I\fP Initialen des Autor -.fi -.RE -z. B. -.RS -.nf -\f(CRmail_quote_format=On %D in %G you wrote: -news_quote_format=In %M, %F wrote:\fR -.fi -.RE -ergäbe folgendes: -.RS -.nf -\f(CRAm 21. Sept 1993 9:45:51 \-0400 in alt.sources schrieben Sie: -In schreib Joe Bar :\fR -.fi -.RE -.\" -.\" -The quoted text section of an article is marked by a preceding quote string -at the beginning of each quoted line. The default quote string is set to -\&'>_'. The default can be changed by setting the tinrc variable -\fBquote_chars\fP to ones own preference. (Note that '_' underline is used to -represent a space). -.SS "MAILEN, WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN" -The command interface to \fBGroupMail\fP, \fBPageMail\fP, \fBPostMail\fP or -\fBThreadMail\fP ('\fBm\fP'), \fBPipe\fP ('\fB|\fP'), \fBPrint\fP ('\fBo\fP'), \fBPageRepost\fP -or \fBGroupRepost\fP ('\fBx\fP') and \fBGroupSave\fP, \fBPageSave\fP or \fBThreadSave\fP -('\fBs\fP' and \fBGroupAutoSave\fP, \fBPageAutoSave\fP or \fBThreadAutoSave\fP '\fBS\fP') -articles is the same for ease of use. -.PP -Auto\-saving with \fB*AutoSave\fP ('\fBS\fP') is a special case and operates only -on marked articles. They will processed without any further prompting -according to the default save parameters defined in tinrc or by any -attributes set for the current group. -.PP -Otherwise, the initial prompt will ask you to select which article, thread, -hot (auto\-selected), regular expression pattern, tagged articles you wish to -mail, pipe etc. -.PP -Tagged articles must have already been tagged with a \fB*Tag\fP ('\fBt\fP') -command. All tagged articles can be untagged by a \fB*Untag\fP ('\fBU\fP') untag -command. -.PP -If a regular expression pattern is selected you are asked to enter a pattern -(e.g., to match all articles subject lines containing 'net News' you enter -"net News"). Any articles that match the entered expression will be mailed, -piped etc. See also the \fBwildcard\fP tinrc variable for advanced pattern -matching options. -.PP -Various expansion characters are recognized when entering the directory and -file to save to. Environment variables (prefixed with '$') and user home -directories (prefixed by '~' or '~username') can be specified. Environment -variables can themselves contain other special characters. -.PP -To save articles to a mailbox enter '=' when asked for -the save filename. If you enter just '=' then articles will be saved to a -mailbox with the name of the current newsgroup (eg, alt.sources). See -\fBmaildir\fP. -.PP -To save in savedir// format enter -\&'+'. See \fBsavedir\fP. Like '+' %G is expanded to the -current news.group.name but without \fBsavedir\fP prefixed. %P is expanded to -the news.group.name with all '.\&' replaced by '/'. -.PP -If saving multiple files at once the filename (if not referring to a -mailbox) will be extended by ".num" where "num" is at least 3 digit number -counting up from 1. Environment variables are allowed within a filename -(e.g., \fI$SOURCES/dir/filename\fP). -.PP -.\" -.\" -When saving articles you can specify whether the saved files should be post -processed. A default process type can be set via \fBpost_process_type\fP. -.SS "AUTOMATISCHES MAILEN UND SPEICHERN VON UNGELESENEN ARTIKELN" -\fBtin\fP allows new/unread news articles to be mailed (\*(rq\fB\-M\fP\*(rq and -\&\*(rq\fB\-N\fP\*(rq option) or saved (\*(rq\fB\-S\fP\*(rq option) in batch mode for later -reading. Useful when going on holiday and you don't want to return and find -that expire has removed a whole load of unread articles. Best to run via -\fB\%cron\fP(8) everyday while away, after which you will be mailed a report -of which articles were mailed/saved from which newsgroups and the total -number of articles mailed/saved. Articles are saved in a private news -structure under your \fBsavedir\fP directory (default is -\fI${TIN_HOMEDIR:\-"$HOME"}/News\fP). Be careful of using this option if you -read a lot of groups because you could overflow your file system. -.PP -When using \*(rq\fB\-S\fP\*(rq together with a given directory to save to (\*(rq\fB\-s\fP\*(rq -option), the same directory must be specified when reading the articles by -\&\*(rq\fB\-R\fP\*(rq. -.PP -If you only want to save some of your groups use the \fBbatch_save\fP tinrc -variable. Set to ON or OFF in tinrc to enable/disable saving of all groups -and then use the \fBbatch_save\fP attribute to fine tune which groups you want -to have saved. For example, if you want to save most of your groups, then -set \fBbatch_save\fP to ON in tinrc and selectively turn off the ones you don't -want using attributes. -.TP 2i -\fBtin \-M iain \-c \-f newsrc.mail\fP -(alle ungelesenen Artikel in den in der Datei newsrc.mail angegebenen -Newsgruppen an den lokalen Benutzer iain senden und als gelesen markieren) -.TP 2i -\fBtin \-S \-c \-f newsrc.save\fP -(alle ungelesenen Artikel in den in der Datei newsrc.save angegebenen -Newsgruppen speichern und als gelesen markieren) -.TP 2i -\fBtin \-R\fP -.\" -.\" -(mittels \fBtin \-S\fP gespeicherte Artikel lesen) -.SS BEREICHE -A range is simply a group of items marked using the \fBSetRange\fP (\fB'#'\fP) -key. Certain \fBtin\fP commands will operate on a range if one exists rather -than just the current item. A range is an expression of the form -\(en, e.g., 10\(en15 will highlight items 10 -through 15 on the current screen. Other than absolute numeric positions, -\&'.\&' can be used in place of the current cursor position and '$' can be -used to mean the highest number available. Entering '0' at the prompt undoes -the previously entered range selection. Currently the only commands that -understand ranges are \fBGroupMarkThdRead\fP ('\fBK\fP'), \fBMarkArtUnread\fP -('\fBz\fP') and \fBMarkThdUnread\fP ('\fBZ\fP'). -.SS "NEWSGROUP LISTEN & WILDCARDS" -Several places in \fBtin\fP allow you to specify a list of newsgroups. These -include command\-line groups, (un)subscribe groups, the AUTO[UN]SUBSCRIBE -mechanism. The scope= attributes file tag and the filter file group= tag -also use the same syntax. \fBtin\fP interprets this variable similarly to -\fB\%rn\fP(1). It contains a list of patterns, separated by commas and -possibly prefixed with exclamation points. An exclamation point negates the -meaning of a match on this pattern, and can be used to cancel certain -matches. See \fB\%wildmat\fP(3) for details about the understood -patterns. Some examples: -.sp -\fIalt.config,news.*,!news.test\fP -.sp -Passt auf alt.config und alles in der 'news'\-Hierarchie außer news.test -.PP -.\" -.\" -See the explanation for the $\fBAUTOSUBSCRIBE\fP and $\fBAUTOUNSUBSCRIBE\fP -variables for further examples. -.SS SIGNATUREN -\fBtin\fP will recognize a signature in either -\fI${TIN_HOMEDIR:\-"$HOME"}/.signature\fP or \fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP. -If \fI${TIN_HOMEDIR:\-"$HOME"}/.signature\fP exists, then the signature will be -pulled into the editor for mail commands only. A signature in -\fI${TIN_HOMEDIR:\-"$HOME"}/.signature\fP will not be pulled into the editor for -posting commands since \fB\%inews\fP(1) will append the signature itself. -.PP -Eine Signatur in \fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP wird sowohl für Post\- als -auch für Mail\-Befehle in den Editor geladen. -.PP -Nachstehend eine Beispiel \fI.Sig\fP Datei: -.RS -.nf -\f(CRNAMES Erika Mustermann -SNAIL Heidestraße 17, 99999 Notreal, Germany\fR -.fi -.RE -.PP -.\" -.\" -\fBtin\fP also has the capability to generate random signatures on a per -newsgroup basis if so desired. The way to accomplish this is to specify the -default signature or the group attribute sigfile as a directory. If for -example the sigfile path is \fI/usr/iain/.sigs\fP and \fI.sigs\fP is a directory -then \fBtin\fP will select a random signature from any file that is in the -directory \fI.sigs\fP (note: one signature per numbered file). A random -signature can also consist of a fixed part signature that can contain your -name, address etc. followed by the random sig. The fixed part of the random -sig is read from the file \fI$HOME/.sigfixed\fP. -.SS "ANSICHTEN ANPASSEN" -Das Aussehen der Auswahl\-, Gruppen\- und Threadebene kann den eigenen -Bedürfnissen angepasst werden. Hierzu dienen Formatanweisungen, welche den -Inhalt und die Position der einzelnen Elemente einer Bildschirmzeile -definieren. Innerhalb der Formatanweisungen werden Platzhalter eingesetzt, -die später beim Bildschirmaufbau durch den eigentlichen Inhalt ersetzt -werden. Falls der Artikel mehrere Adressen hat, wird nur die erste -ausgewertet. Folgende Platzhalter stehen zur Verfügung: -.PP -.in +.3i -.nf -.ta \w'%G 'u +\w'aktuelle Gruppen\-, Thread\- oder Artikelnummer'u -\fB%D\fP Datum -\fB%F\fP Absender, Name und/oder E\-Mail Adresse -\fB%G\fP Name der Gruppe -\fB%I\fP Initialen des Absenders -\fB%L\fP Anzahl der Zeilen -\fB%M\fP Message\-ID -\fB%R\fP Anzahl der Antworten im Thread -\fB%S\fP Bewertung -\fB%T\fP Subject und/oder Baumdarstellung des Thread -\fB%U\fP Anzahl ungelesener Artikel -\fB%d\fP Gruppenbeschreibung -\fB%f\fP Gruppenkennzeichnung -\fB%m\fP Artikelkennzeichnungen -\fB%n\fP aktuelle Gruppen\-, Thread\- oder Artikelnummer -\fB%s\fP Subject -\fB%%\fP % -.fi -.in -0.3i -.PP -Nicht alle Platzhalter können in jeder Ebene verwendet werden. Die folgende -Tabelle gibt einen Überblick über die Verfügbarkeit der einzelnen -Platzhalter: -.PP -.in +.3i -.nf -.ta \w'%G 'uC +\w'\fBselect_format\fP 'uC +\w'\fBgroup_format\fP 'uC +\w'\fBthread_format\fP'uC - \fBselect_format\fP \fBgroup_format\fP \fBthread_format\fP -\fB%D\fP X X -\fB%F\fP X X -\fB%G\fP X -\fB%I\fP X X -\fB%L\fP X X -\fB%M\fP X X -\fB%R\fP X -\fB%S\fP X X -\fB%T\fP X -\fB%U\fP X -\fB%d\fP X -\fB%f\fP X -\fB%m\fP X X -\fB%n\fP X X X -\fB%s\fP X -\fB%%\fP X X X -.fi -.in -0.3i -.PP -Voreingestellt sind folgende Formatanweisungen: -.PP -.in +.3i -.nf -.ta \w'select_format 'u +\w'"\fB%n %m [%L] %T %F\fP"'u -\fBselect_format\fP: "\fB%f %n %U %G %d\fP" -\fBgroup_format\fP: "\fB%n %m %R %L %s %F\fP" -\fBthread_format\fP: "\fB%n %m [%L] %T %F\fP" -.fi -.in -0.3i -.PP -Ob in der Auswahlebene die Gruppenbeschreibung angezeigt wird, hängt von -\fBshow_description\fP ab. Außerdem kann mit \fBSelectToggleDescriptions\fP -('\fBd\fP') die Beschreibung aus\- bzw. eingeblendet werden. -.PP -Welche Absenderinformationen bei '\fB%F\fP' angezeigt werden ist abhängig von -\fBshow_author\fP. Zusätzlich kann mit \fBGroupToggleSubjDisplay\fP -bzw. \fBThreadToggleSubjDisplay\fP ('\fBd\fP') durch die möglichen Anzeigeoptionen -durchgeschaltet werden. -.PP -Für die Datumsanzeige mit '\fB%D\fP' wird \fBdate_format\fP benutzt. Man kann -allerdings auch in runden Klammern ein eigenes Datumsformat angeben, das -anstelle von \fBdate_format\fP benutzt werden soll. Der Platzhalter dafür würde -dann z. B. so aussehen: '\fB%(%d %b %y %H:%M)D\fP' (siehe \fBdate_format\fP für -weiterführende Informationen). -.PP -Die Länge der einzelnen Elemente (außer '\fB%%\fP') kann mit einer positiven -Zahl nach dem '\fB%\fP' definiert werden. Das folgende Beispiel stellt den -Bewertung in der Threadebene 10 Zeichen breit dar: '\fB%10S\fP'. -.PP -Wenn der Gruppenname zusammen mit der Gruppenbeschreibung angezeigt wird, -kann die Breite des Gruppennamens über einen optionalen, durch Komma -getrennten, zweiten Wert gesteuert werden (z. B. '\fB%60,20G\fP'). Der erste -Wert kann weggelassen werden (z. B. ('\fB%,20G\fP))'. Ist kein zweiter Wert -angegeben verwendet \fBtin\fP ein Standardwert von 32. -.PP -Einige Platzhalter haben eine voreingestellte Breite die unter Umständen -dazu führt, dass der Inhalt abgeschnitten wird. Für Platzhalter die nur -Zahlen enthalten wird der Wert durch eine passende Zehnerpotenz geteilt und -mit dem zugehörigen SI\-Suffix versehen, z. B. wird bei einer Breite von vier -aus 54321 dann "54 k". Wenn das nicht gewünscht ist muss die Breite -angegeben werden, z. B. '\fB%6n\fP'. Hier ist eine Übersicht der -Voreinstellungen: -.PP -.in +.3i -.nf -.ta \w'Platzhalter 'u +\w'Breite'u -Platzhalter Breite -\fB%I\fP 3 -\fB%L\fP 4 -\fB%M\fP 10 -\fB%R\fP 3 -\fB%S\fP 6 -\fB%U\fP 5 -\fB%n\fP 4 -.fi -.in -0.3i -.PP -Wird bei '\fB%D\fP' keine Länge angegeben, so wird die Länge anhand der -Formatanweisung für das Datum und dem aktuellen Tag bestimmt. Sind in der -Formatanweisung volle Wochentags\- oder Monatsnamen enthalten, kann es -vorkommen, dass das Datum anderer Artikel länger als ermittelt ist. In -diesem Fall wird das Datum abgeschnitten dargestellt. Das tritt z. B. auf, -wenn der aktuelle Monat Mai ist und der Artikel, zu dem das Datum angezeigt -werden soll, im Dezember gepostet wurde. In solchen Fällen ist es sinnvoll, -die maximale Länge manuell zu ermitteln und in die Formatanweisung -einzutragen. -.PP -Falls der Formatstring enthält '\fB%G\fP' und '\fB%d\fP' enthält und keine Länge -gegeben ist, bestimmt der längste Gruppenname die Länge für '\fB%G\fP.' Der -verbleibende Platz wird für '\fB%d\fP' verwendet. -.PP -Sind in der Formatanweisung '\fB%F\fP' und '\fB%s\fP' bzw. '\fB%T\fP' enthalten und -jeweils keine Längen angegeben, dann nimmt '\fB%F\fP' ein Drittel und '\fB%s\fP' -bzw. '\fB%T\fP' zwei Drittel des für beide zusammen verfügbaren Platzes ein. -.PP -Weiterhin kann eine Mindest\- oder Maximalbildschirmbreite pro Element (außer -\&'\fB%%\fP') definiert werden. Das entsprechende Element wird dann erst -dargestellt, wenn auf dem Bildschirm mehr bzw. weniger Zeichen als angegeben -dargestellt werden können. Das ist hilfreich, um die Anzeige bei kleineren -Bildschirmen oder Terminalfenstern nicht zu überfrachten. Hier erfolgt die -Angabe vor dem den Platzhalter charakterisierenden Buchstaben durch eine -positive Zahl, welcher ein '\fB>\fP' bzw. '\fB<\fP' vorangestellt -wird. Soll z. B. der Bewertung erst ab einer Bildschirmbreite größer 100 -Zeichen angezeigt werden, lautet die Formatanweisung '\fB%>100S\fP'. -.PP -Wenn eine Längenangabe und eine Mindest\- oder Maximalbildschirmbreite -angegeben werden soll, muss zuerst die Länge und danach die Mindestbreite -oder Maximalbreite in der Formatanweisung stehen. Um die Bewertung 10 -Zeichen breit und erst ab einer Bildschirmbreite über 100 Zeichen -darzustellen, lautet die Anweisung '\fB%10>100S\fP'. Für '\fB%F\fP' und -\&'\fB%s\fP' bzw. '\fB%T\fP' kann, getrennt durch einen Doppelpunkt, eine zweite -Länge angegeben werden, die verwendet wird, wenn die Mindestbildschirmbreite -nicht erreicht wird. Wird nach dem Doppelpunkt keine Länge angegeben, wird -der Eintrag auch bei Unterschreitung der Mindestbildschirmbreite angezeigt -und die Länge so berechnet, als wäre keine Mindestbildschirmbreite angegeben -worden. Im folgenden Beispiel zeigt \fBtin\fP den Betreff mit einer Länge von -60 Zeichen an, wenn der Bildschirm breiter als 100 Zeichen ist, ansonsten -wird eine Länge von 40 Zeichen verwendet: '\fB%60>100:40s\fP'. -.PP -Das Aussehen der Anhangsebene sowie der MIME\- und UUEncode\-Header auf -Artikelebene kann ebenfalls über Formatzeichenfolgen angepasst werden. Die -folgenden Variablen sind verfügbar: -.PP -.in +.3i -.nf -.ta \w'%G 'u +\w'Complete/incomplete UUE part indicator'u -\fB%C\fP Zeichensatz -\fB%c\fP Wie %C aber mit Beschreibung -\fB%D\fP Zeilenanzahl -\fB%d\fP Wie %D aber mit Beschreibung -\fB%E\fP Content Kodierung -\fB%e\fP Wie %E aber mit Beschreibung -\fB%I\fP Kennzeichen für vollständige/unvollständige UUE\-Teile -\fB%L\fP Sprache -\fB%l\fP Wie %L aber mit Beschreibung -\fB%N\fP Name -\fB%n\fP Wie %N aber mit Beschreibung -\fB%S\fP Content Untertyp -\fB%s\fP Wie %S aber mit Beschreibung -\fB%T\fP Content Typ -\fB%t\fP Wie %T aber mit Beschreibung -\fB%Z\fP Größe in Bytes -\fB%z\fP Wie %Z aber mit Beschreibung -\fB%%\fP % -.fi -.in -0.3i -.PP -Nicht alle Elemente können in jeder Variablen verwendet werden. Die folgende -Tabelle bietet einen Überblick: -.PP -.in +.3i -.nf -.ta \w'%G 'uC +\w'\fBattachment_format\fP 'uC +\w'\fBpage_mime_format\fP 'uC +\w'\fBpage_uue_format\fP'uC - \fBattachment_format\fP \fBpage_mime_format\fP \fBpage_uue_format\fP -\fB%C\fP X X -\fB%c\fP X X -\fB%D\fP X X X -\fB%d\fP X X X -\fB%E\fP X X X -\fB%e\fP X X X -\fB%I\fP X -\fB%L\fP X X -\fB%l\fP X X -\fB%N\fP X X -\fB%n\fP X X -\fB%S\fP X X X -\fB%s\fP X X X -\fB%T\fP X X X -\fB%t\fP X X X -\fB%Z\fP X X X -\fB%z\fP X X X -\fB%%\fP X X X -.fi -.in -0.3i -.PP -Standardmäßig wird der String nicht abgeschnitten. Wenn er die -Bildschirmbreite überschreitet, wird er umgebrochen. Wenn dem % Zeichen ein -Ausrufezeichen ('!\&') vor Großbuchstaben folgt, wird das Element -weggelassen, wenn nicht genügend Platz vorhanden ist. Wenn dem % Zeichen ein -Sternchen ('*') vor Kleinbuchstaben folgt, wird die Beschreibung -weggelassen, wenn nicht genügend Platz vorhanden ist. Wenn dem % Zeichen vor -einem Kleinbuchstaben ein Ausrufezeichen ('!\&') folgt, wird zuerst die -Beschreibung und dann der Inhalt weggelassen. Das Kürzen erfolgt immer von -rechts nach links, zuerst wird die Beschreibung weggelassen, und wenn keine -Beschreibung mehr angezeigt wird, wird der Inhalt weggelassen. Wenn %T und -%S direkt aufeinander folgen, wird ein '/' dazwischen eingefügt. %Z hat -immer einen Dezimalpunkt und kann einen einbuchstabigen bi\-Suffix haben. -.PP -Voreingestellt sind folgende Formatanweisungen: -.PP -.in +.3i -.nf -.ta \w'attachment_format'u +\w'"\fB%T%S%E%C%d\fP"'u -\fBattachment_format\fP: "\fB%T%S%E%C%d\fP" -\fBpage_mime_format\fP: "\fB[\-\- %T%S%*n%z%*l%!c%!d%*e \-\-]\fP" -\fBpage_uue_format\fP: "\fB[\-\- %T%S%*n%I%!d%*e \-\-]\fP" -.fi -.\" -.\" -.SS "TIPPS UND TRICKS" -In \fBtin\fP kann weitgehend mit den vier Cursortasten navigiert werden. Die -linke Pfeiltaste geht eine Ebene nach oben, die rechte Pfeiltaste eine Ebene -nach unten, die obere Pfeiltaste eine Zeile nach oben und die untere -Pfeiltaste eine Zeile nach unten. -.PP -In den folgenden Newsgruppen finden sich nützliche Informationen über -Newssoftware: -.in +.5i -.ti -\w'\(em'u -\(emde.comm.software.newsreader (Informationen über Newsreader wie tin, -slrn, ...) -.ti -\w'\(em'u -\(emnews.software.nntp (Informationen über NNTP) -.ti -\w'\(em'u -\(emnews.answers (Frequently Asked Questions (FAQ) verschiedenster Themen) -.PP -Many prompts within \fBtin\fP offer a default choice that the cursor is -positioned on. By pressing '\fB\fP' the default value is taken. -Most prompts can be aborted by pressing '\fB\fP'. -.PP -When \fBtin\fP is run in an \fB\%xterm\fP(1x) it will resize itself each time the -\fB\%xterm\fP(1x) is resized. -.PP -\fBtin\fP will reread the -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP file at set -intervals (\fBreread_active_file_secs\fP) to show any newly arrived news. -.PP -.\" -.\" -Falls Sie feststellen, dass eine große Anzahl neuer Newsgruppen den -Bildschirm füllt, können diese durch Drücken von \fBSelectToggleReadDisplay\fP -('\fBr\fP') ausgeblendet werden. -.SS "XTERM BUTTONS" -Falls die Umgebungsvariable \fB$TERM\fP auf \fB\%xterm\fP(1x) gesetzt ist können -die Maustasten benutzt werden um Gruppen oder Artikel auszuwählen. Es wird -davon ausgegangen, dass die Maustasten normal zugeteilt sind (Maustaste1 ist -die linke Maustaste). -.PP -Im Allgemein (d. h. für die Gruppen\-, Thread\- und Artikelmenüs), -.TP 10 -Maustaste1 (Links) -Geht in die nächste (untere) Ebene, wenn Sie auf einen Artikel klicken, -sonst nach unten blättern. -.TP -Maustaste2 (Mitte) -kehrt zur vorherigen (oberen) Ebene zurück, wenn Sie auf einen Artikel -klicken, andernfalls wird eine Seite nach oben geblättert. -.TP -Maustaste3 (Rechts) -positions on the article line under mouse cursor, or pages down if you've -clicked outside the list of articles. -.PP -Im Gruppenauswahlmenü, wenn die Maus auf eine Gruppe zeigt, dann: -.TP 10 -Linke Maustaste -moves to and selects the group pointed at, just like \fBSelectReadGrp\fP -('\fB\fP'). -.TP -Mittlere Maustaste -Beendet das Programm, genau wie \fBQuit\fP ('\fBq\fP'). -.TP -Rechte Maustaste -springt zu der Gruppe, auf die gezeigt wird. -.PP -Wenn die Maus im Artikelmenü auf einen Artikel (oder Thread) zeigt, dann: -.TP 10 -Linke Maustaste -reads the article pointed at, just like \fBGroupReadBasenote\fP -('\fB\fP'), or the thread, just like \fBGroupListThd\fP ('\fBl\fP'). -.TP -Mittlere Maustaste -exits the menu, catching up on the group if you have -\fBgroup_catchup_on_exit\fP set in your configuration, just like \fBQuit\fP -('\fBq\fP'). -.TP -Rechte Maustaste -springt zu dem Artikel (oder Thread), auf den gezeigt wird. -.PP -Im Thread\-Menü, wenn die Maus auf einen Artikel zeigt, dann: -.TP 10 -Linke Maustaste -liest den Artikel, auf den verwiesen wird, genau wie \fBThreadReadArt\fP -('\fB\fP'). -.TP -Mittlere Maustaste -exits the menu, catching up on the thread if you have -\fBthread_catchup_on_exit\fP set in your configuration, just like \fBQuit\fP -('\fBq\fP'). -.TP -Rechte Maustaste -springt zu dem Artikel, auf den gezeigt wird. -.PP -.\" -.\" -In other menus and areas button pressing reverts back to usual cut and paste -of \fB\%xterm\fP(1x), but after one click of any button. -.SS "INDEX DATEIEN" -Wenn Ihr Newsserver NOV\-Indexdateien unterstützt (siehe -\fB\%newsoverview\fP(5), die meisten modernen Installationen tun dies) und Sie -eine schnelle Verbindung zu Ihrem Newsserver haben, können Sie diesen -Abschnitt ignorieren. -.PP -Wenn Ihr Newsserver keine NOV\-Indexdateien unterstützt oder Sie eine sehr -sehr langsame Verbindung zu Ihrem Newsserver haben, kann \fBtin\fP den Index -für jede Newsgruppe zwischenspeichern wenn \fBcache_overview_files\fP auf ON -gesetzt ist. Beachten Sie, daß dieser Cache große Mengen an Speicherplatz -verbrauchen kann, wenn Sie sehr viele Gruppen und/oder Gruppen mit hohem -Datenverkehr lesen. Um Platz zu sparen kann \fBcompress_overview_files\fP auf -ON gesetzt werden. -.PP -Each user creates/updates his/her own index files that are stored in -\fI${TIN_INDEX_NEWSDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.news/\fP. If you are -reading via NNTP then the news server name will be appended to keep the -indexes for different servers separate. If you are reading off the local -spool and local overview files already exist then turning on caching will -have no effect. Likewise unless you see significant delays entering a group -when reading via NNTP then turning on caching will have little or no effect. -.PP -Entering a group the first time tends to be slow because the index file must -be built from scratch. To alleviate the slowness start \fBtin\fP to create all -index files for the groups you subscribe to with \fBtin \-u \-v\fP and go for a -coffee. Subsequent readings of a group will only need to do incremental -updating of the index file and will be much faster as only new articles will -need to be cached. -.PP -As indexing might take some time you may want to run \fBtin\fP from the system -batcher \fB\%cron\fP(8) with the \*(rq\fB\-u\fP\*(rq option: -.PP -.RS -.nf -\f(CR30 6 * * * /usr/local/bin/tin \-u\fR -.fi -.RE -.PP -Falls Sie wenig Platz auf der lokalen Festplatte haben, sollten Sie in -Betracht ziehen, zwischengespeicherte Daten für Gruppen, die Sie nicht mehr -lesen, manuell zu bereinigen: -.PP -.RS -.nf -\f(CRfind ${TIN_INDEX_NEWSDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.news* \e -\-type f \-name "[0\-9]*.[0\-9]" \-atime +28 | xargs rm \-f\fR -.fi -.RE -.\" -.\" -.SH DATEIEN -.\" TODO: mention dead.article, dead.articles -.\" .article[.$$], .cancel[.$$], .letter[.$$]? -.\" ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -.\" $PWD/trace[.out] (--with-trace) -.\" $TMPDIR/NNTP (-D 1) -.\" $TMPDIR/FILTER (-D 2) -.\" $TMPDIR/ARTS (-D 2) -.\" $TMPDIR/BITMAP (-D 4) -.\" $TMPDIR/REFS.dump (-D 8) -.\" $TMPDIR/REFS.info (-D 8) -.\" $TMPDIR/MALLOC (-D 16) -.\" $TMPDIR/ATTRIBUTES (-D 32) -.\" $TMPDIR/SCOPES-R (-D 32) -.\" $TMPDIR/SCOPES-W (-D 32) -.\" $TMPDIR/ACTIVE (-D 64) -.\" $TMPDIR/GNKSA (-D 64) -Für eine ausführlich Beschreibung siehe \fB\%tin\fP(5). -.PP -\fI$MAILCAPS\fP -.br -\fI~/.mailcap\fP -.br -\fI/etc/mailcap\fP -.br -\fI/usr/etc/mailcap\fP -.br -\fI/usr/local/etc/mailcap\fP -.br -\fI/etc/mail/mailcap\fP -.PP - -\fI/etc/nntpserver\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.cancelsecret\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.mime.types\fP -.br -\fI/etc/mime.types\fP -.br -\fI/etc/tin/mime.types\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsauth\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/.oldnewsrc\fP -.fi -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.signature\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.sigfixed\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/.inputhistory\fP -.PP - -\fI${TIN_INDEX_MAILDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.mail/\fP -.PP - -.nf -\fI${TIN_INDEX_NEWSDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.news${NNTPSERVER:+"\-$NNTPSERVER"}/\fP -.fi -.PP - -\fI${TIN_INDEX_SAVEDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.save/\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/active.mail\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/active.save\fP -.PP - -.\" .I ${TIN_LIBDIR:\-NEWSLIBDIR}/attributes -\fI/etc/tin/attributes\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/attributes\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/filter\fP -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/keymap${${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}:+".${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}"}\fP -.br -\fI/etc/tin/keymap${${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}:+".${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}"}\fP -.fi -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/mailgroups\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/posted\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/Mail/posted\fP -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/postponed.articles\fP -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/motd\fP -.fi -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/msglog\fP -.fi -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/newsgroups\fP -.fi -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/serverrc\fP -.fi -.PP - -.\" .I ${TIN_LIBDIR:\-NEWSLIBDIR}/tinrc -\fI/etc/tin/tinrc\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP -.PP - -\fI/etc/tin/tin.defaults\fP -.PP - -\fI/usr/local/share/locale/${LC_MESSAGES}/LC_MESSAGES/tin.mo\fP -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/active.times\fP -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/newsgroups\fP -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/organization\fP -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/overview.fmt\fP -.PP - -.\" -.\" -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/subscriptions\fP -.SH UMGEBUNGSVARIABLEN -.\" TODO: - sort in a useful order -.\" - add undocumented env-vars (e.g. $DEV_TCP (SCO), -.\" ${HOST:-"$HOSTNAME"} fallback) -.TP -\fBTINRC\fP -Setzen Sie diese Variable wenn Sie Kommandozeilenoptionen angeben möchten -mit denen \fBtin\fP gestartet werden soll um die Eingabe, jedes Mal wenn \fBtin\fP -ausgeführt wird, zu sparen. Der Inhalt der Umgebungsvariablen wird den -angegebenen Kommandozeilenoptionen vorangestellt \(em bevor diese auf -Gültigkeit überprüft werden \(em um Sie manuell übersteuern zu können. -.TP -\fBTIN_HOMEDIR\fP -Setzen Sie diese Variable falls Sie das \fI.tin\fP Verzeichnis nicht in -\fI$HOME/\fPhaben möchten. Wenn Sie z.B. alle privaten Dateien von \fBtin\fP in -\fI/tmp/.tin\fP haben möchten, setzen Sie $\fBTIN_HOMEDIR\fP auf \fI/tmp\fP. -.TP -\fBTIN_INDEX_NEWSDIR\fP -Define this variable if you do not want the \fI.news\fP directory in -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/\fP. E.g., if you want all \fBtin\fP's news index -files in \fI/tmp/.news\fP you would set $\fBTIN_INDEX_NEWSDIR\fP to \fI/tmp\fP. -.TP -\fBTIN_INDEX_MAILDIR\fP -Define this variable if you do not want the \fI.mail\fP directory in -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/\fP. E.g., if you want all \fBtin\fP's mail index -files in \fI/tmp/.mail\fP you would set $\fBTIN_INDEX_MAILDIR\fP to \fI/tmp\fP. -.TP -\fBTIN_INDEX_SAVEDIR\fP -Define this variable if you do not want the \fI.save\fP directory in -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/\fP. E.g., if you want all \fBtin\fP's save index -files in \fI/tmp/.save\fP you would set $\fBTIN_INDEX_SAVEDIR\fP to \fI/tmp\fP. -.TP -\fBTIN_LIBDIR\fP -Define this variable if you want to override the \fBNEWSLIBDIR\fP path that was -compiled into the \fBtin\fP binary, default is \fI/usr/lib/news\fP. If \fBtin\fP is -running in NNTP mode setting this variable has no effect. -.TP -\fBTIN_SPOOLDIR\fP -Define this variable if you want to override the \fBSPOOLDIR\fP path that was -compiled into the \fBtin\fP binary, default is \fI/var/spool/news\fP. If \fBtin\fP -is running in NNTP mode setting this variable has no effect. -.TP -\fBTIN_NOVROOTDIR\fP -Define this variable if you want to override the \fBNOVROOTDIR\fP path that was -compiled into the \fBtin\fP binary, default is \fBSPOOLDIR\fP (see above). If -\fBtin\fP is running in NNTP mode setting this variable has no effect. -.TP -\fBTIN_NOVFILENAME\fP -Define this variable if you want to override the \fBOVERVIEW_FILE\fP filename -that was compiled into the \fBtin\fP binary, default is \fI.overview\fP. If \fBtin\fP -is running in NNTP mode setting this variable has no effect. -.TP -\fBTIN_ACTIVEFILE\fP -Setzen Sie diese Variable, wenn Sie den \fBNEWSLIBDIR/active\fP\-Pfad -überschreiben wollen, der in das \fBtin\fP\-Binary einkompiliert wurde. Falls -\fBtin\fP im NNTP\-Modus läuft, hat diese Variable keine Auswirkung. Sollte -$\fBTIN_LIBDIR\fP gesetzt sein wird es $\fBTIN_ACTIVEFILE\fP vorangestellt. -.TP -\fBNNTPSERVER\fP -The default NNTP server to remotely read news from. This variable only needs -to be set if the \*(rq\fB\-r\fP\*(rq command\-line option is specified and the file -\fI/etc/nntpserver\fP does not exist. The \*(rq\fB\-g\fP\*(rq command line option -overrides $\fBNNTPSERVER\fP. -.TP -\fBNNTPPORT\fP -The NNTP TCP\-port to read news from. This variable only needs to be set if -the TCP\-port is not 119 (the default). The \*(rq\fB\-p\fP\*(rq command\-line option -does override $\fBNNTPPORT\fP. -.TP -\fBNNTPSPORT\fP -The NNTPS TCP\-port to read news from. This variable only needs to be set if -the TCP\-port is not 563 (the default). The \*(rq\fB\-p\fP\*(rq and \*(rq\fB\-T\fP\*(rq -command\-line options do override $\fBNNTPSPORT\fP. -.TP -\fBDISTRIBUTION\fP -Setzen den Artikel\-Header \*(rqDistribution:\*(rq auf den Inhalt der Variablen -statt auf den Systemstandard. -.TP -\fBISO2ASC\fP -Auswahl einer ISO\-zu\-ASCII\-Zeichensatz\-Dekodierungstabelle für die -Dekodierung des Artikeltextes. Die Werte können von \-1 bis 6 reichen. -.RS +.5i -.TP -\fB\-1\fP -Keine Umformung -.TP -\fB0\fP -Universal\-Tabelle für viele Sprachen -.TP -\fB1\fP -Universal\-Tabelle mit einfachem Abstand -.TP -\fB2\fP -Tabelle für Dänisch, Niederländisch, Deutsch, Norwegisch und Schwedisch -.TP -\fB3\fP -Tabelle für Dänisch, Finnisch, Norwegisch und Schwedisch mit der -entsprechenden ISO 646\-Variante -.TP -\fB4\fP -Tabelle mit \fBRFC\%1345\fP\-Codes in Klammern -.TP -\fB5\fP -Tabelle für Drucker, die es erlauben, mit Backspace zu überschreiben -.TP -\fB6\fP -Tabelle für IBM PC\-Zeichensatz (Codepage 437) -.RE -.TP -\fBORGANIZATION\fP -Set the article header field \*(rqOrganization:\*(rq to the contents of the -variable instead of the system default. If it points to a readable file a -random line from that file will be used. If reading news on an Apollo -DomainOS machine the environment variable $\fBNEWSORG\fP has to be used instead -of $\fBORGANIZATION\fP. -.TP -\fBNEWSORG (DomainOS)\fP -DomainOS spezifisch, wie $\fBORGANIZATION\fP auf anderen Betriebssystemen -(siehe oben). -.TP -\fBREPLYTO\fP -Setzt die \*(rqReply\-To:\*(rq\-Kopfzeile auf die in der Variable angegebene -Rücksendeadresse. Dies ist nützlich, wenn Sie Antworten an eine andere -Adresse erhalten möchten. -.TP -\fBNAME\fP -Überschreibt den vollständigen Namen, der im Geos\-Feld in \fI/etc/passwd\fP -angegeben ist, siehe auch \fBmail_address\fP. -.TP -\fBREALNAME\fP -Bewirkt das Gleiche wie $\fBNAME\fP. -.TP -\fBHOME\fP -Das Anmeldeverzeichnis des Benutzers. Weitere Informationen finden sich in -\fB\%environ\fP(5). -.TP -\fBMAILER\fP -Diese Variable hat Vorrang vor dem Standard\-Mailer, der bei allen -Versandoperationen innerhalb von \fBtin\fP verwendet wird. -.TP -\fBMAIL\fP -Voller Pfad zum Postfach des Benutzers. -.TP -.\" we don't support the %message || ?message notation -\fBMAILPATH\fP -Eine durch Doppelpunkte getrennte Liste von Dateinamen, die auf neue E\-Mails -überprüft werden. Übersteuert die Variable $\fBMAIL\fP. -.TP -\fBVISUAL\fP -This variable has precedence over the default editor (i.e., \fB\%vi\fP(1)) -that is used in all editing operations within \fBtin\fP (e.g., posting, -replying, follow\-ups, ...). Evaluation order is -\fI${VISUAL:\-"${EDITOR:\-vi}"}\fP. See \fB\%environ\fP(5) for more info. -.TP -\fBEDITOR\fP -Falls $\fBVISUAL\fP nicht gesetzt ist, wird in dieser Variablen nach einem -Standard\-Editor gesucht. Wenn $\fBEDITOR\fP und $\fBVISUAL\fP beide nicht gesetzt -sind verwendet \fBtin\fP den Standard\-Editor des Systems (\fB\%vi\fP(1) bei -UNIX\-Systemen). Weitere Informationen finden sich in \fB\%environ\fP(5). -.TP -\fBAUTOSUBSCRIBE\fP -A new group is checked against the list of patterns; if it matches, \fBtin\fP -subscribes the user to the group without further query. See the section -"NEWSGROUP LISTS & WILDCARDS" for an explanation of the valid syntax. For -example, setting -.sp -\fIAUTOSUBSCRIBE=comp.os.unix.*,talk.*,!talk.politics.*\fP -.sp -will automatically subscribe the user to all new groups in the comp.os.unix -hierarchy, and all talk groups other than talk.politics groups (which will -be queried for as usual). Of course this does not work if \fBtin\fP is started -with the \*(rq\fB\-X\fP\*(rq command\-line switch. -.TP -\fBAUTOUNSUBSCRIBE\fP -Is handled like the $\fBAUTOSUBSCRIBE\fP variable, but groups matching the list -are unsubscribed from without further query. For example, setting -.sp -\fIAUTOUNSUBSCRIBE=alt.flame.*,u*,!uk.*\fP -.sp -wird den Benutzer automatisch von allen neuen alt.flame\-Gruppen und allen -Gruppen die mit u beginnen (Universitätsgruppen), mit Ausnahme von -UK\-Gruppen (die wie gewohnt abgefragt werden), abmelden. -.TP -\fBTMPDIR\fP -Pfadname eines Verzeichnisses, das \fBtin\fP für die Erstellung temporärer -Dateien zur Verfügung gestellt wird. -.TP -\fBMAILCAPS\fP -Diese Variable kann verwendet werden, um den Standard\-Suchpfad für -\fB\%mailcap\fP(5)\-Dateien zu überschreiben. Siehe auch \fB\%tin\fP(5). -.TP -\fBNOMETAMAIL\fP -Setzen Sie diese Variable, um die Verwendung von \fB\%metamail\fP(1) oder einen -Ersatz (z. B. metamutt) zu unterdrücken. -.TP -\fBMM_CHARSET\fP -Benutzter MIME\-Zeichensatz, falls nicht über die tinrc\-Variable -\fBmm_charset\fP konfiguriert. -.TP -\fBISPELL\fP -Set this variable to point to \fB\%ispell\fP(1) or a replacement and its -cmd\-line options. -.TP -\fBPGPOPTS\fP -Zusätzliche Optionen, die Sie an Ihr \fB\%pgp\fP(1)\- oder \fB\%gpg\fP(1)\-Programm -übergeben möchten. -.TP -\fBPGPPATH\fP -Übersteuert den Namen des \fB\%pgp\fP(1)\-Verzeichnisses in \fB$HOME\fP, dass deine -Schlüssel usw. enthält. -.TP -\fBGNUPGHOME\fP -Übersteuert den Namen des \fB\%gpg\fP(1)\-Verzeichnisses in \fB$HOME\fP, dass deine -Schlüssel usw. enthält. -.TP -\fBLC_CTYPE\fP -This variable determines the \fB\%locale\fP(5) category for character handling -functions. Usually it determines the character classes for pattern matching -character classification and case conversion. Currently this is not true for -\fBtin\fP (which temporary unsets \fB$LC_CTYPE\fP right before any match is done -to avoid confusion). Its value should be of the form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP]. See \fB\%environ\fP(5) -for more information. -.TP -\fBLC_MESSAGES\fP -Datums\- und Zeitformate. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] entsprechen. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBLC_NUMERIC\fP -Formate für numerische Werte. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] entsprechen. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBLC_TIME\fP -Datums\- und Zeitformate. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] entsprechen. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBLC_ALL\fP -Datums\- und Zeitformate. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] entsprechen. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBLANG\fP -Datums\- und Zeitformate. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] entsprechen. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBLANGUAGE\fP -Datums\- und Zeitformate. Ihr Wert sollte der Form -\fIlanguage\fP[\fI_territory\fP][\fI.codeset\fP][\fI@modifier\fP] -entsprechen. \fB$LC_ALL\fP der \fB$LANG\fP muss ebenfalls gesetzt sein. Für -weitere Informationen siehe \fB\%locale\fP(5) und \fB\%environ\fP(5). -.TP -\fBCOLUMNS\fP -A decimal integer > 0 used to indicate the user's preferred width in -column positions for the terminal screen or window. If this variable is -unset or null, the implementation determines the number of columns, -appropriate for the terminal or window. When \fB$COLUMNS\fP is set, any -terminal\-width information implied by \fB$TERM\fP will be overridden. Users and -portable applications should not set \fB$COLUMNS\fP unless they wish to -override the system selection and produce output unrelated to the terminal -characteristics. -.TP -\fBLINES\fP -A decimal integer > 0 used to indicate the user's preferred number of -lines on a page or the vertical screen or window size in lines. A line in -this case is a vertical measure large enough to hold the tallest character -in the character set being displayed. If this variable is unset or null, the -implementation determines the number of lines, appropriate for the terminal -or window. When \fB$LINES\fP is set, any terminal\-height information implied by -\fB$TERM\fP will be overridden. Users and portable applications should not set -\fB$LINES\fP unless they wish to override the system selection. -.TP -\fBTERM\fP -Der verwendete Terminaltyp. Weitere Informationen finden sich in -\fB\%environ\fP(5). -.TP -\fBDISPLAY\fP -Anzeigename der auf den X\-Server zeigt; erforderlich für xface. -.TP -\fBWINDOWID\fP -Wird verwendet, um die X\-Window\-ID des Terminal zu bestimmen. Erforderlich -für xface. Sollte vom Terminalemulator gesetzt werden. -.TP -\fBSHELL\fP -Der Pfadname der Login\-Shell des Benutzers. Dient zum Setzen von -\fBdefault_shell_command\fP. -.TP -\fBXDG_RUNTIME_DIR\fP -.\" -.\" -Pfadname des Verzeichnisses, in dem nicht zwingend benötigte Laufzeitdateien -abgelegt werden sollen. -.SH SIGNALE -.\" TODO: add missing, sort useful, document in detail -\fBtin\fP verarbeitet folgende Signale: -.TP -\fBSIGHUP\fP -Sauber beenden. -.TP -\fBSIGTERM\fP -Sauber beenden. -.TP -\fBSIGUSR1\fP -Beenden ohne das Terminal (tty) wiederherzustellen. -.TP -\fBSIGUSR2\fP -.\" -.\" -.\" .SH DIAGNOSTICS -.\" give an overview of the most common error messages and how to cope with -.\" them. -.\" -.\" -.\" -Speichern der \fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP\-Datei. -.SH SICHERHEIT -Falls \fBtin\fP im Debug\-Modus (\*(rq\fB\-D n\fP\*(rq) gestartet wird, werden in -\fB$TMPDIR\fP für alle Benutzer lesbare Dateien erzeugt, welche das -NNTP\-Passwort des aktuellen Benutzers im Klartext enthalten können (falls -Verbose angeschaltet ist). Auf Multiuser\-Systemen sollte daher $TMPDIR auf -einen sicheren Speicherort gesetzt werden, bevor \fBtin\fP im (verbosen) -Debug\-Modus gestartet wird (z. B. \fBTMPDIR=$HOME tin \-vD 1\fP). -.PP -Die Verwendung der Option \*(rq\fB\-k\fP\*(rq zum Überspringen der -Zertifikatsüberprüfung macht die Sitzung unsicher, da das Zertifikat des -Servers nicht überprüft wird; Vermeiden Sie diese Option nach Möglichkeit. -.PP -.\" -.\" -Falls der Server anfangs keine Authentifizierung verlangt, aber -Komprimierung unterstützt und Komprimierung angefordert wird, beendet sich -\fBtin\fP falls später eine Authentifizierung verlangt wird. Durch Benutzung -der Befehlszeilenoption \*(rq\fB\-A\fP\*(rq in Verbindung mit \*(rq\fB\-C\fP\*(rq kann dieses -Verhalten umgangen werden. -.SH "KONFORM ZU" -.\" - RFC\%2045, RFC\%2047, RFC\%2231, RFC\%2980, RFC\%3977, RFC\%4155 -.\" RFC\%4643, RFC\%5322, RFC\%5536, RFC\%5537, RFC\%6048 or whatever -.\" -.\" -\fBtin\fP ist konform zu dem Basisdefinitionsband von IEEE Std 1003.1\-2008, -Abschnitt 12, Utility\-Konventionen (Utility Argument Syntax, Utility Syntax -Guidelines). -.SH ANMERKUNGEN -Unterstützung für reguläre Ausdrücke wird durch die PCRE\-Bibliothek -\fB\%pcre\fP(3) oder \fB\%pcre2\fP(3) bereitgestellt welche Open\-Source\-Software -ist. Autor ist Philip Hazel und das Urheberrecht \(co liegt bei der -University of Cambridge, England. -.br -.\" -.\" - -.SH FEHLER -\fBCNews\fP\0NNTPd, \fB\%noffle\fP(1) (<= V1.0\-pre5) und \fBNewsCache\fP (<= -V1.1.91) können nicht mit gepipelinten GROUP\-Befehlen (\fBRFC\%3977\fP) -umgehen. Falls Sie Probleme mit einem der genannten historischen Server -haben, definieren Sie DISABLE_PIPELINING in include/autoconf.h und -kompilieren Sie das Programm neu. -.PP -Die Verwendung des \*(rq\fB\-C\fP\*(rq (COMPRESS)\-Flags mit \fBINN\fP\-Versionen zwischen -2.6.1 und 2.7.1 (beide einschl.) kann dazu führen, dass \fBtin\fP beim Posten -hängt und sich mit einem Timeout beendet. Dies wurde in der \fBINN\fP\-Version -2.7.2 behoben. Als Workaround verwenden Sie einfach kein \*(rq\fB\-C\fP\*(rq. -.PP -.\" -.\" -Bevor Sie einen Bug\-Report an schicken, -überprüfen Sie bitte, ob die aktuellste (stabile) Version verwendet wird, -falls nicht, bitte erst aktualisieren! Sehen Sie sich die doc/TODO\-Datei für -bekannte Fehler an. Wenn Sie immer noch meinen einen Fehler gefunden zu -haben benutzen Sie bitte die Funktion \fBBugReport\fP ('\fBR\fP') und schreiben -auf Englisch. Bitte fügen Sie Ihrem Bug\-Report KEINE Core\-Datei bei \(em -außer wir haben diese angefordert. -.SH GESCHICHTE -\fBtin\fP basiert auf \fB\%tass\fP(1), einem Newsreader der von Rich Skrenta -entwickelt und dessen Code im März 1991 von ihm in alt.sources -veröffentlicht wurde. Die erste Version von \fBtin\fP wurde am 23. August 1991 -veröffentlicht. \fB\%tass\fP(1) orientiert sich stark an notesfiles, einer -Public Domain Version für UNIX von PLATO Notes, welches 1982 von Ray Essick -und Rob Kolstad an der University of Illinois entstand. Eine Übersicht der -Versionen findet sich unter -.br -.\" -.\" -. -.SH DANKSAGUNGEN -.IP "Rich Skrenta" -Autor von \fB\%tass\fP(1) v3.2, der Basis für diesen Newsreader. -.IP "Bill Davidsen" -Autor von envarg.c, Umgebungsvariablenleseroutine. -.IP "Mike Gleason" -Autor von sigfile.c, Zufallssignaturengenerierungsroutine. -.IP "Markus Kuhn " -Autor von langinfo.c, charset.c und der iso2asc.txt ISO\-8859\-1 -Dokumentation. -.IP "Arnold D. Robbins" -Autor von strftime.c, Datumsfromatierungsroutine. -.IP "Rich Salz" -Autor von wildmat.c Mustervergleichs\- und parsdate.y Datumsanalyseroutinen. -.IP "Dave Taylor" -Autor von curses.c aus dem Mailreader \fB\%elm\fP(1). -.IP "Chris Thewalt" -Autor von getline.c, \fB\%emacs\fP(1)\-artige Eingaberoutine. -.IP "Steven Madsen" -für \fB\%pgp\fP(1) (Pretty Good Privacy) Unterstützung. -.IP "Philip Hazel " -für \fB\%pcre\fP(3), \fB\%pcre2\fP(3) (Bibliothek für Perl\-kompatible reguläre -Ausdrücke). -.IP "Mark Martinec " -.\" -.\" -für \fB\%snprintf\fP(3) und \fB\%vsnprintf\fP(3) Fallbacks. -.SH AUTOR -.TP 1i -Iain Lea -.\" -.\" -.SH MAINTAINER -.TP 1i -Urs Janßen -.\" -.\" -.SH ÜBERSETZUNG -.IP "Erika Mustermann " -Wenn Sie Fehler in der Übersetzung finden, schicken Sie bitte eine E-Mail -an . -.\" -.SH "SIEHE AUCH" -\fB\%elm\fP(1), \fB\%emacs\fP(1), \fB\%gpg\fP(1), \fB\%inews\fP(1), \fB\%ispell\fP(1), -\fB\%lp\fP(1), \fB\%lpr\fP(1), \fB\%metamail\fP(1), \fB\%mutt\fP(1), \fB\%noffle\fP(1), -\fB\%perl\fP(1), \fB\%perlre\fP(1), \fB\%pgp\fP(1), \fB\%rn\fP(1), \fB\%sendmail\fP(1), -\fB\%shar\fP(1), \fB\%slrnface\fP(1), \fB\%tass\fP(1), \fB\%unshar\fP(1), -\fB\%uudecode\fP(1), \fB\%vi\fP(1), \fB\%xterm\fP(1x), \fB\%heapsort\fP(3), -\fB\%iconv\fP(3), \fB\%iconv_open\fP(3), \fB\%nl_langinfo\fP(3), \fB\%pcre\fP(3), -\fB\%pcre2\fP(3), \fB\%pcrepattern\fP(3), \fB\%pcre2pattern\fP(3), \fB\%qsort\fP(3), -\fB\%snprintf\fP(3), \fB\%strftime\fP(3), \fB\%vsnprintf\fP(3), \fB\%wildmat\fP(3), -\fB\%environ\fP(5), \fB\%locale\fP(5), \fB\%mailcap\fP(5), \fB\%mbox\fP(5), -\fB\%mmdf\fP(5), \fB\%newsoverview\fP(5), \fB\%tin\fP(5), \fB\%cron\fP(8), \fBRFC\%1345\fP, -\fBRFC\%1524\fP, \fBRFC\%1952\fP, \fBRFC\%2045\fP, \fBRFC\%2046\fP, \fBRFC\%2047\fP, -\fBRFC\%2231\fP, \fBRFC\%2980\fP, \fBRFC\%3156\fP, \fBRFC\%3977\fP, \fBRFC\%4155\fP, -\fBRFC\%4643\fP, \fBRFC\%4880\fP, \fBRFC\%5198\fP, \fBRFC\%5322\fP, \fBRFC\%5536\fP, -\fBRFC\%5537\fP, \fBRFC\%6048\fP, \fBRFC\%6838\fP, \fBRFC\%8054\fP, \fBRFC\%8143\fP diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/l10n/de/tin.5 tin-2.6.5/doc/l10n/de/tin.5 --- tin-2.6.4/doc/l10n/de/tin.5 2024-12-23 10:57:26.000000000 +0100 +++ tin-2.6.5/doc/l10n/de/tin.5 1970-01-01 01:00:00.000000000 +0100 @@ -1,2785 +0,0 @@ -.\" Project : tin -.\" Module : tin.5 -.\" Author : U. Janssen -.\" Created : 2000-07-10 -.\" Updated : 2024-12-24 -.\" Notes : needs a some work, see TODOs -.\" -.\" -.\"******************************************************************* -.\" -.\" This file was generated with po4a. Translate the source file. -.\" -.\"******************************************************************* -.TH tin 5 "24 Dezember 2024" 2.6.4 "Usenet Newsreader" - -.SH NAME -tin, rtin \- zugehörige Dateien - -.SH BESCHREIBUNG -Diese Handbuchseite beschreibt die vom Newsreader \fB\%tin\fP(1) benutzen -(Konfigurations)\-Dateien und deren Formate. Alle Dateien sollten Unixartige -Zeilenenden ('\(rsn' aka LF) haben. - -.SH DATEIEN -.\" TODO: mention -.\" ${TIN_HOMEDIR:\-"$HOME"}/dead.article -.\" ${TIN_HOMEDIR:\-"$HOME"}/dead.articles -.\" ${TIN_HOMEDIR:\-"$HOME"}/.article[.$$] -.\" ${TIN_HOMEDIR:\-"$HOME"}/.cancel[.$$] -.\" ${TIN_HOMEDIR:\-"$HOME"}/.letter[.$$] -.\" ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -.\" $PWD/trace[.out] (--with-trace) -.\" $TMPDIR/NNTP (-D 1) -.\" $TMPDIR/FILTER (-D 2) -.\" $TMPDIR/ARTS (-D 2) -.\" $TMPDIR/BITMAP (-D 4) -.\" $TMPDIR/REFS.dump (-D 8) -.\" $TMPDIR/REFS.info (-D 8) -.\" $TMPDIR/MALLOC (-D 16) -.\" $TMPDIR/ATTRIBUTES (-D 32) -.\" $TMPDIR/SCOPES-R (-D 32) -.\" $TMPDIR/SCOPES-W (-D 32) -.\" $TMPDIR/ACTIVE (-D 64) -\fI$MAILCAPS\fP -.br -\fI~/.mailcap\fP -.br -\fI/etc/mailcap\fP -.br -\fI/usr/etc/mailcap\fP -.br -\fI/usr/local/etc/mailcap\fP -.br -\fI/etc/mail/mailcap\fP -.sp -.RS -\fB\%mailcap\fP(5)\-Dateien, wie in \fBRFC\%1524\fP definiert. Die Mailcap\-Dateien -werden von \fB\%tin\fP(1) gelesen, um zu bestimmen, wie Nicht\-Text\-Nachrichten -angezeigt werden können. Jede Zeile die mit "#" beginnt ist ein -Kommentar. Leerzeilen werden ignoriert. Andernfalls definiert jede Zeile -einen einzelnen Mailcap\-Eintrag für einen Inhaltstyp. Lange Zeilen können -fortgesetzt werden, indem man sie mit einem Backslash\-Zeichen "\(rs" -beendet. -.sp -Jeder einzelne Mailcap\-Eintrag besteht aus einer Content\-Typ\-Spezifikation, -einem Befehl zum Ausführen und (möglicherweise) einem Satz optionaler -"Flag"\-Werte. -.sp -Das Feld "Typ" ist ein beliebiger Name für einen legalen Inhaltstyp. Es ist -die Zeichenkette, die mit der \*(rqContent\-Type:\*(rq\-Kopfzeile verglichen wird, -um zu entscheiden, ob dies der Mailcap\-Eintrag ist, der der aktuellen -Nachricht entspricht. Zusätzlich kann das Feld Typ einen Subtyp oder einen -Platzhalter enthalten, der allen Subtypen entspricht. -.sp -Das Feld "command" ist ein beliebiger UNIX\-Befehl und wird verwendet, um den -Interpreter für den angegebenen Nachrichtentyp anzugeben. Es wird über die -\fB\%system\fP(3)\-Funktion an die Shell übergeben. -.sp -.\" -.\" Two special codes can appear in the viewing command for objects of type -.\" multipart (any subtype). These are "%n" and "%F". %n will be replaced by -.\" the number of parts within the multipart object. %F will be replaced by a -.\" series of arguments, two for each part, giving first the content-type and -.\" then the name of the temporary file where the decoded part has been stored. -.\" -Semicolons and backslashes within the command or any flag field must be -quoted with backslashes. If the field contains "%s", those two characters -will be replaced by the name of a file that contains the body of the -message. If it contains "%t", those two characters will be replaced by the -content\-type field, including the subtype, if any. If it contains "%{" -followed by a parameter name and a closing "}", then all those characters -will be replaced by the value of the named parameter, if any, from the -\&\*(rqContent\-Type:\*(rq header. Finally, if the field contains "\(rs%", those -two characters will be replaced by a single "%" character. -.sp -Neben dem Typ und dem Befehlsfeld sind folgende "Flags" definiert: -.TP -\fBcompose\fP -The "compose" field may be used to specify a program that can be used to -compose a new body or body part in the given format. Its intended use is to -support mail composing agents that support the composition of multiple types -of mail using external composing agents. As with the view\-command, the -semantics of program execution are operating system dependent. The result of -the composing program may be data that is not yet suitable for mail -transport \(em that is, a Content\-Transfer\-Encoding may need to be applied -to the data. -.TP -\fBcomposetyped\fP -The "composetyped" field is similar to the "compose" field, but is to be -used when the composing program needs to specify the \*(rqContent\-Type:\*(rq -header field to be applied to the composed data. The "compose" field is -simpler, and is preferred for use with existing (non\-mail\-oriented) programs -for composing data in a given format. The "composetyped" field is necessary -when the Content\-Type information must include auxiliary parameters, and the -composition program must then know enough about mail formats to produce -output that includes the mail type information. -.TP -\fBedit\fP -The "edit" field may be used to specify a program that can be used to edit a -body or body part in the given format. In many cases, it may be identical in -content to the "compose" field, and shares the operating\-system dependent -semantics for program execution. -.TP -\fBprint\fP -The "print" field may be used to specify a program that can be used to print -a message or body part in the given format. As with the view\-command, the -semantics of program execution are operating system dependent. -.TP -\fBtest\fP -The "test" field may be used to test some external condition (e.g., the -machine architecture, or the window system in use) to determine whether or -not the mailcap line applies. It specifies a program to be run to test some -condition. The semantics of execution and of the value returned by the test -program are operating system dependent. If the test fails, a subsequent -mailcap entry should be sought. Multiple test fields are not permitted \(em -since a test can call a program, it can already be arbitrarily complex. -.TP -\fBneedsterminal\fP -The "needsterminal" field indicates that the view\-command must be run on an -interactive terminal. This is needed to inform window\-oriented user agents -that an interactive terminal is needed. (The decision is not left -exclusively to the view\-command because in some circumstances it may not be -possible for such programs to tell whether or not they are on interactive -terminals.) The needsterminal command should be assumed to apply to the -compose and edit commands, too, if they exist. Note that this is NOT a test -\- it is a requirement for the environment in which the program will be -executed, and should typically cause the creation of a terminal window when -not executed on either a real terminal or a terminal window. -.TP -\fBcopiousoutput\fP -The "copiousoutput" field indicates that the output from the view\-command -will be an extended stream of output, and is to be interpreted as advice to -the UA (User Agent mail\-reading program) that the output should be either -paged or made scroll\-able. Note that it is probably a mistake if -needsterminal and copiousoutput are both specified. -.TP -\fBdescription\fP -Das Feld "description" stellt eine Textbeschreibung (optional in -Anführungszeichen) bereit, die den Datentyp beschreibt und von -E\-Mail\-Programmen verwendet werden kann, die die Daten beschreiben möchten, -bevor sie ihre Anzeige anbieten. -.TP -\fBtextualnewlines\fP -The "textualnewlines" field, if set to any non\-zero value, indicates that -this type of data is line\-oriented and that, if encoded in base64, all -newlines should be converted to canonical form (CRLF) before encoding, and -will be in that form after decoding. In general, this field is needed only -if there is line\-oriented data of some type other than text/* or non\-line\- -oriented data that is a subtype of text. -.TP -\fBx11\-bitmap\fP -The "x11\-bitmap" field names a file, in X11 bitmap (xbm) format, which -points to an appropriate icon to be used to visually denote the presence of -this kind of data. -.TP -\fBnametemplate\fP -The "nametemplate" field gives a filename format, in which %s will be -replaced by a short unique string to give the name of the temporary file to -be passed to the viewing command. This is only expected to be relevant in -environments where filename extensions are meaningful, e.g., one could -specify that a GIF file being passed to a gif viewer should have a name -ending in ".gif" by using "nametemplate=%s.gif" -.PP -\fB\%tin\fP(1) currently only respects the "test", "description", -"nametemplate" and partly the "needsterminal" flags, all other flags are -internally ignored. It also can't handle the "%F" and "%n" expansions yet. -.TP -Beispiel: -.RS -.nf -# mailcap Beispiel\-Datei -.br -image/*;\e -.br -.in +0.3i -xv \-8 \-geometry +0 '%s';\e -.br -description=%{name} %t\-Image;\e -.br -test=test "$DISPLAY" != "";\e -.br -nametemplate=%s.IMAGE -.in -0.3i -.sp -message/rfc822;\e -.br -.in +0.3i -${PAGER:\-"more"} '%s';\e -.br -edit=${EDITOR:\-"vi"} '%s';\e -.br -compose=${EDITOR:\-"vi"} '%s';\e -.br -print=a2ps '%s';\e -.br -needsterminal -.in -0.3i -.fi -.RE -.RE -.PP - -\fI/etc/nntpserver\fP -.sp -.RS -Standard\-NNTP\-Server zum Lesen von Nachrichten, wenn nicht vom lokalen Spool -gelesen wird. '\fB\-g\fP \fIServer\fP', $\fBNNTPSERVER\fP haben eine höhere Priorität -(in dieser Reihenfolge), der zur Kompilierungszeit angegebene Standardserver -hat eine niedrigere Priorität. -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.cancelsecret\fP -.sp -.RS -Geheimwort das für Cancel\-Locks verwendet werden soll falls \fB\%tin\fP(1) mit -Unterstützung dafür gebaut wurde. Eine leere Datei deaktiviert in diesem -Fall die Erstellung des Cancel\-Locks. Diese Datei sollte nur für den -Benutzer lesbar sein. -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.mime.types\fP -.br -\fI/etc/mime.types\fP -.br -\fI/etc/tin/mime.types\fP -.sp -.RS -Mime\-Typ / Dateinamen Erweiterungspaare -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsauth\fP -.sp -.RS -"\fInntpserver[:port]\fP \fIpassword\fP [\fIuser\fP]" pairs for NNTP servers that -require authorization. If the password contains a space or a tab it must be -enclosed in double quotes ("). Usernames must not be enclosed in double -quotes and thus can't contain spaces or tabs. Any line that starts with "#" -is a comment. Blank lines are ignored. This file should be readable only for -the user as it contains the user's unencrypted password for reading news! -.TP -\fBNNTPServer\fP -Vollständiger Name (FQDN) des Newsservers. Zusätzlich kann noch ein Port mit -angehängter :Portnummer angegeben werden. -.TP -\fBPasswort\fP -Unverschlüsseltes Passwort für den Newsserver. -.TP -\fBUser\fP -Benutzername auf dem Newsserver falls er vom lokalen Benutzernamen -abweicht. Dieses Feld ist optional. -.TP -Beispiel: -.RS -# Beispiel .newsauth\-Datei -.br -news.example.org geheim -.br -news.example.net verborgen gast -.br -news.example.com "streng geheim" james.bond@example.com -.RE -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP -.sp -.RS -"\fINewsgruppe\fP\fIMarkierung\fP [\fIArtikel\fP[,\fIArtikel\fP | \-\fIArtikel\fP]...]" -Zeilen. -.TP -\fBNewsgruppe\fP -Der Name der Newsgruppe. -.TP -\fBMarkierung\fP -Markierung die angibt ob die Gruppe abonniert ist ':' oder nicht '!\&'. -.TP -\fBArtikel\fP -Bereich bereits gelesener Artikel aus dieser Gruppe; durch Kommas getrennte -Zahlen mit aufeinander folgenden Zahlen, die durch Bindestriche -zusammengefasst sind. Leere Zeilen und Zeilen, die mit "#" beginnen werden -ignoriert und nicht zurückgeschrieben. -.TP -Beispiel: -.RS -# .newsrc Beispiel\-Datei -.br -news.software.b! 1\-666,669 -.br -news.software.nntp: 1\-13245,13247,13249 -.br -news.software.readers: 1\-19567,19571\-19597 -.RE -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/.oldnewsrc\fP -.fi -.sp -.RS -Sicherungskopie von \fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.signature\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP -.sp -.RS -Signatur -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.sigfixed\fP -.sp -.RS -Fester Bestandteil einer zufällig erzeugten Signatur, dieser wird zuerst -hinzugefügt -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/.inputhistory\fP -.sp -.RS -Verlaufsliste der zuletzt verwendeten Zeichenfolgen -.RE -.PP - -\fI${TIN_INDEX_MAILDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.mail/\fP -.sp -.RS -Mailgruppen\-Indexdateien -.RE -.PP - -.nf -\fI${TIN_INDEX_NEWSDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.news${NNTPSERVER:+"\-$NNTPSERVER"}/\fP -.fi -.sp -.RS -Newsgruppen\-Indexdateien -.RE -.PP - -\fI${TIN_INDEX_SAVEDIR:\-"${TIN_HOMEDIR:\-"$HOME"}/.tin"}/.save/\fP -.sp -.RS -Indexdateien für gespeicherte Newsgruppen -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/active.mail\fP -.sp -.RS -Active Datei ("\fIMailgroupname\fP \fIMaximalwert\fP \fIMinimalwert\fP \fIMailspool\fP" -Quadrupel) der E\-Mail\-Gruppen des Benutzers (erfordert, dass \fB\%tin\fP(1) mit -mh\-Mail\-Handling\-Unterstützung gebaut wurde). -.TP -\fBMailgroupname\fP -Pfad der Mailbox relativ zu Feld #4, wobei '/' in '.\&' umgewandelt sein -muss. -.TP -\fBMaximalwert\fP -Geben Sie hier einfach eine große Zahl ein, die höher ist als die der -höchsten Nachricht im Postfach -.TP -\fBMinimalwert\fP -hier 0 angeben -.TP -\fBMailspool\fP -Pfad des Mail\-Spool\-Verzeichnisses. Dies muss der vollständige Pfadname zum -Stammverzeichnis des E\-Mail Ordnerbereichs sein. -.TP -Beispiel: -.RS -Mail.inbox 12345 00000 /home/foo -.br -Mail.outbox 23456 00000 /home/foo -.RE -.sp -Dies ermöglicht den Zugriff auf die Ordner "Posteingang"und "Postausgang" -des Benutzers foo. Der Zugriff erfolgt über /home/foo/Mail/inbox und -/home/foo/Mail/outbox -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/active.save\fP -.sp -.RS -aktive Datei der gespeicherten Newsgroups des Benutzers, verwendet von \fBtin \-R\fP. -.RE -.PP - -.\" tin uses inns old (pre 2.x) Path convention. -.\" as with inn >= 2.2.x getting more and more popular -.\" we should think about checking for the new Paths (/news/etc/) -.\" ${TIN_LIBDIR\-/news/etc"}/attributes -\fI/etc/tin/attributes\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/attributes\fP -.sp -.RS -The group attributes files may be used to override some global settings from -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP on a per group basis. Order is -important as last match counts; this allows one to refine attributes for -narrowed scopes. Note that the \fIscope=\fP line has to be -specified before the attributes are specified for that list and each -attribute can only be set once per scope section. All attributes are set to -a reasonable default so you only have to specify the attribute that you want -to change. All toggle attributes are set by specifying ON/OFF. Otherwise, -they function exactly as their global equivalents. The following group -attributes are available: -.TP -\fBscope\fP -This changes the list of groups to which the attributes that follow will be -applied. See the section NEWSGROUP LISTS & WILDCARDS in \fB\%tin\fP(1) for the -types of pattern that can be used here. -.TP -\fBadd_posted_to_filter\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBadvertising\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBalternative_handling\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBask_for_metamail\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBauto_cc_bcc\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBauto_list_thread\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBauto_select\fP -Führt nach dem Betreten der Gruppe automatisch den Befehl -\fBGroupMarkUnselArtRead\fP ('\fBX\fP') aus. -.TP -\fBbatch_save\fP -Sende ungelesene Artikel an den angegebenen Benutzer um sie später lesen zu -können. Für weitere Informationen siehe den Abschnitt "AUTOMATISCHES MAILEN -UND SPEICHERN VON UNGELESENEN ARTIKELN" in \fB\%tin\fP(1). -.TP -\fBdate_format\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBdelete_tmp_files\fP -If this is set to ON, then saved article files that have been post\-processed -will be automatically deleted, otherwise the user will be asked whether to -delete the post\-processed files. Automatic processing of marked articles -using \fBGroupAutoSave\fP ('\fBS\fP') will suppress prompting. -.TP -\fBeditor_format\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBextquote_handling\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBfcc\fP -Postfach zum Speichern gesendeter E\-Mails. Das verwendete Format wird über -die Variable tinrc \fBmailbox_format\fP festgelegt. -.TP -\fBfollowup_to\fP -Setzt den \*(rqFollowup\-To:\*(rq\-Header auf die angegebene(n) Gruppe(n). -.TP -\fBfrom\fP -Identisch mit der tinrc\-Variable \fBmail_address\fP -.TP -\fBgroup_catchup_on_exit\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBgroup_format\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmail_8bit_header\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmail_mime_encoding\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmaildir\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmailing_list\fP -Wird verwendet, falls eine Gruppe eine Mailingliste ist. Alle Antworten an -die Gruppe werden stattdessen an diese E\-Mail\-Adresse weitergeleitet. -.TP -\fBmark_ignore_tags\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmark_saved_read\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBmime_forward\fP -Determines whether usenet articles are forwarded as attachment or -inline. When set to OFF, the forwarded article will be included in the body -of the mail, while setting this variable to ON will cause the article to be -attached as a separate MIME part. Enabling \fBmime_forward\fP is particularly -useful for articles consisting of multiple MIME parts such as PGP/MIME -signed messages or being encoded in a different character set than your -local one. It is also useful if the receiver should be able to operate on -the entire forwarded article (i.e., view or save it without your -comments). On the other hand, if you want to forward only some parts of the -article or to insert 'inline' annotations, you might want to disable this -option. Currently mime_forward is forced if the article to be attached is a -multipart MIME article, this may change in a future version. Please note -that for this option to have effect, the tinrc variable -\fBinteractive_mailer\fP has to be set to 0 (which is the default). -.TP -\fBmime_types_to_save\fP -A comma separated list of MIME major/minor Content\-Types that will be saved -when using the view/save and save/autosave features. A single * can be used -to wildcard the major and/or minor type and a ! as the first character in an -entry will negate it, eg: image/*,!image/bmp,!text/html. Default is */* -.TP -\fBnews_headers_to_display\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBnews_headers_to_not_display\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBnews_quote_format\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBorganization\fP -This can be used to set the article header field \*(rqOrganization:\*(rq. It -overrides the setting (if any) of organization in \fI/etc/tin/tin.defaults\fP -and $\fBORGANIZATION\fP (or $\fBNEWSORG\fP on Apollo DomainOS). If it points to a -readable file a random line from that file will be used. Note that some news -servers might still overwrite the \&\*(rqOrganization:\*(rq header. -.TP -\fBpos_first_unread\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBpost_8bit_header\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBpost_mime_encoding\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBpost_process_type\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBpost_process_view\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBprint_header\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBprocess_only_unread\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBprompt_followupto\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBquote_chars\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsavedir\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -.\" TODO: document option -\fBsavefile\fP -.TP -\fBshow_art_score\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBshow_author\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBshow_only_unread_arts\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBshow_signatures\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsigdashes\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsigfile\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsignature_repost\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsort_article_type\fP -Identisch mit der tinrc\-Variable \fBsort_article_type\fP -.TP -\fBsort_threads_type\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBtex2iso_conv\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBthread_articles\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBthread_catchup_on_exit\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBthread_format\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBthread_perc\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBtrim_article_body\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBsuppress_soft_hyphens\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBverbatim_handling\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBwrap_on_next_unread\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBx_body\fP -A piece of text that will be added at the start of a message body. If this -string starts with a / or ~ then it is assumed to be the name of a file -containing the text to insert. If the string starts with a ! then what -follows is assumed to be the path to a program to be executed to generate -the content. %G is expanded to the current news.group.name and %P is -expanded to the news.group.name with all '.\&' replaced by '/'. -.TP -\fBx_comment_to\fP -Fügt Header \*(rqX\-Comment\-To:\*(rq ein, dies ist nur in FIDO\-Gruppen nützlich. -.TP -\fBx_headers\fP -A string including header\-name and the contents of the header that will be -automatically added when posting. If the string starts with a / or ~ then it -is assumed to be the name of a file containing the header and its content to -be inserted. If the string starts with a ! then what follows is assumed to -be the path to a program to be executed to generate the header and its -content. %G is expanded to the current news.group.name and %P is expanded to -the news.group.name with all '.\&' replaced by '/'. -.TP -\fBquick_kill_scope\fP -Eine durch Komma getrennte Liste von Newsgroup\-Mustern im Wildmat\-Stil, auf -welche Gruppen die durch \fBQuickFilterKill\fP hinzugefügte Filterregel -angewendet wird. Falls sie nicht gesetzt ist, wird die Vorgabe aus der -tinrc\-Variablen \fBdefault_filter_kill_global\fP verwendet. -.TP -\fBquick_kill_expire\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_kill_expire\fP -.TP -\fBquick_kill_case\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_kill_case\fP -.TP -\fBquick_kill_header\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_kill_header\fP -.TP -\fBquick_select_scope\fP -Eine durch Kommata getrennte Liste von Newsgroup\-Mustern (im Wildmat\-Stil) -auf welche Gruppen die durch \fBQuickFilterSelect\fP hinzugefügte Filterregel -angewendet wird. Falls sie nicht gesetzt ist, wird die Vorgabe aus der -tinrc\-Variablen \fBdefault_filter_select_global\fP verwendet. -.TP -\fBquick_select_expire\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_select_expire\fP -.TP -\fBquick_select_case\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_select_case\fP -.TP -\fBquick_select_header\fP -Identisch mit der tinrc\-Variable \fBdefault_filter_select_header\fP -.TP -\fBispell\fP -Path and options for \fB\%ispell\fP(1)\-like spell\-checker, e.g., "aspell -\-\-mode=email \-\-dont\-backup check" -.TP -\fBmm_network_charset\fP -Identisch mit der tinrc\-Variable gleichen Namens -.TP -\fBundeclared_charset\fP -Assume (broken) articles without MIME charset declaration have this charset -\(em default is US\-ASCII. This attribute works only on systems with working -\fB\%iconv\fP(3) or \fB\%ucnv_*\fP(), others might have to compile \fB\%tin\fP(1) -with \-\-disable\-mime\-strict\-charset. -.TP -\fBundeclared_cs_guess\fP -Guess charset for (broken) articles without MIME charset declaration. This -attribute works only on systems with working \fB\%iconv\fP(3) or \fB\%ucnv_*\fP() -and \fB\%ucsdet_getName()\fP from libicui18n. It has no effect if -undeclared_charset is also set. -.TP -Beispiel: -.RS -.nf -# zusätzliche Header einfügen -# ISO\-8859\-1 als Zeichensatz annehmen falls keiner -# angegeben wurde; in allen Gruppen außer fido7.* -scope=*,!fido7.* -x_headers=~/.tin/headers -undeclared_charset=ISO\-8859\-1 - -# in *sources* Postprozesstyp auf nur Shell Archive setzen -scope=*sources* -post_process_type=1 - -# in *binaries* turn on full post processing, -# remove tmp files and set Followup\-To: poster -scope=*binaries* -post_process_type=2 -delete_tmp_files=ON -followup_to=poster - -# Anderes quote_chars in fido.* Newsgruppen -# und X\-Comment\-To: Zeile hinzufügen -scope=fido.* -quote_chars=%I>_ -x_comment_to=ON - -# in fido7.* Gruppen den Zeichnsatz erraten -scope=fido7.* -undeclared_cs_guess=ON - -# Keine Signatur in *.test Newsgruppen anhängen -# und Subject vorwählen -scope=*.test -sigfile=\-\-none -x_headers=Subject: Test \- ignore \- no reply - -# ISO\-2022\-JP\-2 als Zeichensatz annehmen -scope=fj.*,japan.* -undeclared_charset=ISO\-2022\-JP\-2 -.fi -.RE -.RE -.PP - -.\" TODO: add missing descriptions and explain things in detail. -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/filter\fP -.sp -.RS -The filter file is used to assign scores to certain articles. Based on the -score an article can be filtered out (hidden) or marked hot. Empty lines or -lines beginning with a '#' are ignored. Multiple matching\-rules in the same -scope are all applied individually and not only when they all hit at the -same time (logical OR not AND). -.TP -\fBcomment\fP -Every entry (rule) in the filter file might get a comment. Multiple lines -are allowed (but only for comments yet). Every line must start with the -"comment=" keyword. Comments must appear first in the rule. Comment lines -placed within a rule will be moved to the begin of the next rule. This might -be changed in the future. Don't use '#' to mark comments as those lines are -ignored and your comments will get lost on the next write of the file. -.TP -\fBgroup\fP -Eine durch Komma getrennte Liste von Newsgroup\-Mustern im Wildmat\-Stil, auf -welche Gruppen die Filterregel angewendet wird. Diese Zeile ist zwingend -erforderlich! -.TP -\fBcase\fP -0=Groß/Kleinschreibung beachten, 1=Groß/Kleinschreibung ignorieren -.TP -\fBscore\fP -Wert der Regel; kann auch eines der Zauberwörter "kill" oder "hot" sein. -.TP -\fBsubj\fP -Vergleiche mit \*(rqSubject:\*(rq. Der verwendete Vergleichstyp (Wildmat oder -Regex) hängt von der Einstellung der tinrc\-Variable \fBwildcard\fP ab. -.TP -\fBfrom\fP -Match against \*(rqFrom:\*(rq. \fB\%tin\fP(1) converts the contents of the -\&\*(rqFrom:\*(rq header to an old style e\-mail address, e.g., \*(rqsome@body.example -(John Doe)\*(rq instead of \*(rqJohn Doe \*(rq, before -trying to match the patterns in the filter rule. The matching type used -(wildmat or regex) depends on the setting of the tinrc variable \fBwildcard\fP. -.TP -\fBmsgid\fP -Vergleiche mit \*(rqMessage\-ID:\*(rq & allen \*(rqReferences:\*(rq. Der verwendete -Vergleichstyp (Wildmat oder Regex) hängt von der Einstellung der -tinrc\-Variablen \fBwildcard\fP ab. -.TP -\fBmsgid_last\fP -Vergleiche mit \*(rqMessage\-ID:\*(rq und letztem \*(rqReferences:\*(rq Eintrag (direkte -Antworten). Der verwendete Vergleichstyp (Wildmat oder Regex) hängt von der -Einstellung der tinrc\-Variable \fBwildcard\fP ab. -.TP -\fBmsgid_only\fP -Vergleiche mit \*(rqMessage\-ID:\*(rq. Der verwendete Vergleichstyp (Wildmat oder -Regex) hängt von der Einstellung der tinrc\-Variable \fBwildcard\fP ab. -.TP -\fBrefs_only\fP -Vergleiche mit \*(rqReferences:\*(rq. Der verwendete Vergleichstyp (Wildmat oder -Regex) hängt von der Einstellung der tinrc\-Variable \fBwildcard\fP ab. -.TP -\fBlines\fP -Übereinstimmung mit \*(rqLines:\*(rq, Zahl -entspricht mehr als. -.TP -\fBgnksa\fP -Match against \*(rqFrom:\*(rq address parser return codes. num matches more than the returned numeric -value. GNKSA_LOCAL_DOMAIN_LITERAL or GNKSA_INVALID_DOMAIN are only returned -if \fBdisable_gnksa_domain_check\fP is set to false. As the built in domain -list is outdated this should be considered carefully. -.in +0.3i -.nf -.ta \w'%406 'u +\w'GNKSA_ZERO_LENGTH_LOCAL_WORD'u - \fB0\fP GNKSA_OK - \fB1\fP GNKSA_INTERNAL_ERROR -\fB100\fP GNKSA_LANGLE_MISSING -\fB101\fP GNKSA_LPAREN_MISSING -\fB102\fP GNKSA_RPAREN_MISSING -\fB103\fP GNKSA_ATSIGN_MISSING -\fB104\fP GNKSA_RANGLE_MISSING -\fB200\fP GNKSA_SINGLE_DOMAIN -\fB201\fP GNKSA_INVALID_DOMAIN -\fB202\fP GNKSA_ILLEGAL_DOMAIN -\fB203\fP GNKSA_UNKNOWN_DOMAIN -\fB204\fP GNKSA_INVALID_FQDN_CHAR -\fB205\fP GNKSA_ZERO_LENGTH_LABEL -\fB206\fP GNKSA_ILLEGAL_LABEL_LENGTH -\fB207\fP GNKSA_ILLEGAL_LABEL_HYPHEN -\fB208\fP GNKSA_ILLEGAL_LABEL_BEGNUM -\fB209\fP GNKSA_BAD_DOMAIN_LITERAL -\fB210\fP GNKSA_LOCAL_DOMAIN_LITERAL -\fB211\fP GNKSA_RBRACKET_MISSING -\fB300\fP GNKSA_LOCALPART_MISSING -\fB301\fP GNKSA_INVALID_LOCALPART -\fB302\fP GNKSA_ZERO_LENGTH_LOCAL_WORD -\fB400\fP GNKSA_ILLEGAL_UNQUOTED_CHAR -\fB401\fP GNKSA_ILLEGAL_QUOTED_CHAR -\fB402\fP GNKSA_ILLEGAL_ENCODED_CHAR -\fB403\fP GNKSA_BAD_ENCODE_SYNTAX -\fB404\fP GNKSA_ILLEGAL_PAREN_CHAR -\fB405\fP GNKSA_INVALID_REALNAME -\fB406\fP GNKSA_MISSING_REALNAME -.fi -.in -0.3i -.TP -\fBxref\fP -Match against \*(rqXref:\*(rq line. Before any matching is done the line is turned -into the same format \*(rqNewsgroups:\*(rq has that is it is turned into a comma -separated newsgroup list with all other information (i.e., the article -counter) removed. The matching type used (wildmat or regex) depends on the -setting of the tinrc variable \fBwildcard\fP. -.TP -.\" TODO: document option in detail -\fBpath\fP -Match against \*(rqPath:\*(rq line. This may not work on some servers. The -matching type used (wildmat or regex) depends on the setting of the tinrc -variable \fBwildcard\fP. -.TP -\fBtime\fP -time_t Wert wann die Regel abläuft -.TP -Beispiel: -.RS -.nf -comment=Markiert alle Artikel über tin, rtin, -comment=tind, ktin or cdtin als heiß -group=* -case=1 -score=hot -subj=\eb(cd|[rk]?)?tin(d|pre)?[\-.0\-9]*\eb - -comment=downscore postings in nsr from google based on -comment=message\-id or path, if both hit they end up with -comment=a score of \-66 which is enough to mark them killed -group=news.software.readers -case=1 -score=\-33 -path=\e.googlegroups\e.com!not\-for\-mail$ -msgid_only=@googlegroups\e.com> -.fi -.RE -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/keymap${${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}:+".${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}"}\fP -.br -\fI/etc/tin/keymap${${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}:+".${LC_ALL:\-"${LC_MESSAGES:\-"${LC_CTYPE:\-"$LANG"}"}"}"}\fP -.fi -.sp -.RS -Keymap\-file, containing "\fIkeyname\fP \fIvalue\fP \fI[value]\fP" pairs separated by -spaces or tabs. If the keymap\-file named with full specified \fB\%locale\fP(5) -is not found, less specific ones are looked for. Various parts will be -stripped off the name, in the following order codeset, normalized codeset, -territory and modifier when looking for the keymap\-file. Below is a list of -all rebindable keynames and their defaults. If a keyname is bound to NULL it -is unassigned. -.sp -.nf -.ta \w'GroupSelThdIfUnreadSelected 'u +\w'SPACE'u +\w'SPACE'u -\fBShellEscape\fP ! -\fBSetRange\fP # -\fBLastPage\fP $ -\fBToggleColor\fP & -\fBLastViewed\fP \- -\fBSearchRepeat\fP \(rs -\fBSearchSubjF\fP / -\fBSearchSubjB\fP ? -\fBSearchAuthB\fP A -\fBSearchBody\fP B -\fBCatchupNextUnread\fP C -\fBEditFilter\fP E -\fBToggleHelpDisplay\fP H -\fBToggleInverseVideo\fP I -\fBConnectionInfo\fP J -\fBLookupMessage\fP L -\fBOptionMenu\fP M -\fBPostponed\fP O ^O -\fBQuitTin\fP Q -\fBBugReport\fP R -\fBDisplayPostHist\fP W -\fBMarkThrUnread\fP Z -\fBFirstPage\fP ^ -\fBSearchAuthF\fP a -\fBCatchup\fP c -\fBHelp\fP h -\fBToggleInfoLastLine\fP i -\fBDown\fP j ^N -\fBUp\fP k ^P -\fBPrint\fP o -\fBQuit\fP q -\fBVersion\fP v -\fBPost\fP w -\fBMarkArtUnread\fP z -\fBQuickFilterSelect\fP [ -\fBQuickFilterKill\fP ] -\fBPipe\fP | -\fBScrollUp\fP < -\fBScrollDown\fP > -\fBPageUp\fP b ^B ^U -\fBPageDown\fP ^D ^F SPACE -\fBRedrawScr\fP ^L -\fBPostponed\fP ^O -\fBMenuFilterSelect\fP ^A -\fBMenuFilterKill\fP ^K -\fBMarkFeedRead\fP ^X -\fBMarkFeedUnread\fP ^W -.sp -\fBAttachSelect\fP ^J ^M -\fBAttachPipe\fP p -\fBAttachSave\fP s -\fBAttachTag\fP t -\fBAttachUntag\fP U -\fBAttachTagPattern\fP = -\fBAttachToggleTagged\fP @ -.sp -\fBConfigToggleAttrib\fP TAB -\fBConfigSelect\fP ^J ^M -\fBConfigLastPage\fP G -\fBConfigNoSave\fP Q -\fBConfigScopeMenu\fP S -\fBConfigFirstPage\fP g -\fBConfigResetAttrib\fP r -.sp -\fBFeedTag\fP T -\fBFeedArt\fP a -\fBFeedHot\fP h -\fBFeedPat\fP p -\fBFeedRepost\fP r -\fBFeedSupersede\fP s -\fBFeedThd\fP t -.sp -\fBFilterEdit\fP e -\fBFilterSave\fP s -.sp -\fBGroupNextUnreadArtOrGrp\fP TAB -\fBGroupReadBasenote\fP ^J ^M -\fBGroupSelThd\fP * -\fBGroupDoAutoSel\fP + -\fBGroupToggleThdSel\fP . -\fBGroupSelThdIfUnreadSelected\fP ; -\fBGroupSelPattern\fP = -\fBGroupReverseSel\fP @ -\fBGroupCancel\fP D -\fBGroupToggleGetartLimit\fP G -\fBGroupMarkThdRead\fP K -\fBGroupNextUnreadArt\fP N -\fBGroupPrevUnreadArt\fP P -\fBGroupAutoSave\fP S -\fBGroupTagParts\fP T -\fBGroupUntag\fP U -\fBGroupMarkUnselArtRead\fP X -\fBGroupToggleSubjDisplay\fP d -\fBGroupGoto\fP g -\fBGroupListThd\fP l -\fBGroupMail\fP m -\fBGroupNextGroup\fP n -\fBGroupPrevGroup\fP p -\fBGroupToggleReadUnread\fP r -\fBGroupSave\fP s -\fBGroupTag\fP t -\fBGroupToggleThreading\fP u -\fBGroupRepost\fP x -\fBGroupUndoSel\fP ~ -.sp -\fBHelpLastPage\fP G -\fBHelpFirstPage\fP g -.sp -\fBPageReplyQuoteHeaders\fP ^E -\fBPagePGPCheckArticle\fP ^G -\fBPageToggleRaw\fP ^H -\fBPageNextUnread\fP TAB -\fBPageNextThd\fP ^J ^M -\fBPageToggleTabs\fP ^T -\fBPageFollowupQuoteHeaders\fP ^W -\fBPageToggleTex2iso\fP " -\fBPageToggleAllHeaders\fP * -\fBPageArticleInfo\fP ' -\fBPageToggleRot\fP % -\fBPageToggleUue\fP ( -\fBPageReveal\fP ) -\fBPageSkipIncludedText\fP : -\fBPageTopThd\fP < -\fBPageBotThd\fP > -\fBPageCancel\fP D -\fBPageFollowup\fP F -\fBPageLastPage\fP G -\fBPageKillThd\fP K -\fBPageNextUnreadArt\fP N -\fBPagePrevUnreadArt\fP P -\fBPageReply\fP R -\fBPageAutoSave\fP S -\fBPageGroupSel\fP T -\fBPageViewUrl\fP U -\fBPageViewAttach\fP V -\fBPageToggleHighlight\fP _ -\fBPageEditArticle\fP e -\fBPageFollowupQuote\fP f -\fBPageFirstPage\fP g -\fBPageListThd\fP l -\fBPageMail\fP m -\fBPageNextArt\fP n -\fBPagePrevArt\fP p -\fBPageReplyQuote\fP r -\fBPageSave\fP s -\fBPageTag\fP t -\fBPageGotoParent\fP u -\fBPageRepost\fP x -.sp -\fBPgpEncSign\fP b -\fBPgpEncrypt\fP e -\fBPgpIncludekey\fP i -\fBPgpSign\fP s -.sp -\fBPostAbort\fP a -\fBPostContinue\fP c -\fBPostCancel\fP d -\fBPostEdit\fP e -\fBPostPGP\fP g -\fBPostIspell\fP i -\fBPostIgnore\fP i -\fBPostMail\fP m -\fBPostPostpone\fP o -\fBPostPost\fP p y -\fBPostSupersede\fP s -\fBPostSend\fP s y -.sp -\fBPostedArticlesSelect\fP ^J ^M -.sp -\fBPostponeOverride\fP Y -\fBPostponeAll\fP A -.sp -\fBPromptYes\fP y Y -\fBPromptNo\fP n N -.sp -\fBPProcNone\fP n -\fBPProcShar\fP s -\fBPProcYes\fP y -.sp -\fBSaveAppendFile\fP a -\fBSaveOverwriteFile\fP o -.sp -\fBSelectEnterNextUnreadGrp\fP TAB n -\fBSelectReadGrp\fP ^J ^M -\fBSelectResetNewsrc\fP ^R -\fBSelectSortActive\fP . -\fBSelectNextUnreadGrp\fP N -\fBSelectSubscribePat\fP S -\fBSelectUnsubscribePat\fP U -\fBSelectQuitNoWrite\fP X -\fBSelectSyncWithActive\fP Y -\fBSelectToggleDescriptions\fP d -\fBSelectGoto\fP g -\fBSelectMoveGrp\fP m -\fBSelectToggleReadDisplay\fP r -\fBSelectSubscribe\fP s -\fBSelectUnsubscribe\fP u -\fBSelectYankActive\fP y -\fBSelectMarkGrpUnread\fP z Z -.sp -\fBScopeSelect\fP ^J ^M -\fBScopeEditAttributesFile\fP E -\fBScopeAdd\fP a -\fBScopeDelete\fP d -\fBScopeMove\fP m -\fBScopeRename\fP r -.sp -\fBThreadReadNextArtOrThread\fP TAB -\fBThreadReadArt\fP ^J ^M -\fBThreadSelArt\fP * -\fBThreadToggleArtSel\fP . -\fBThreadReverseSel\fP @ -\fBThreadCancel\fP D -\fBThreadFollowup\fP F -\fBThreadMarkArtRead\fP K -\fBThreadAutoSave\fP S -\fBThreadUntag\fP U -\fBThreadToggleSubjDisplay\fP d -\fBThreadFollowupQuote\fP f -\fBThreadMail\fP m -\fBThreadSave\fP s -\fBThreadTag\fP t -\fBThreadTagParts\fP T -\fBThreadUndoSel\fP ~ -.sp -\fBUrlSelect\fP ^J ^M -.fi -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/mailgroups\fP -.sp -.RS -Diese Datei enthält kurze Beschreibungen der einzelnen Newsgruppen. Es wird -normalerweise durch die lokalen Newsserver aktualisiert (zB. \fB\%innd\fP(8)) -sobald eine neue Gruppe wird erstellt. Jede Zeile besteht aus zwei durch -Tabulator getrennten Feldern "\fIGruppen.Name\fP \fIKurzbeschreibung\fP". -.TP -\fBMailgroupname\fP -ist der Name der Newsgruppe -.TP -\fBdescription\fP -ist die zugehörige Kurzbeschreibung -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/newsrctable\fP -.sp -.RS -"\fINNTPServer[:Port]\fP \fInewsrc\fP [\fIKurzname\fP [\fI...\fP]]" Paare für den -\&\*(rq\fB\-g\fP\*(rqKommandozeilenschalter. Bei der Suche wird nicht zwischen Groß\- und -Kleinschreibung unterschieden und jede Zeile, die mit "#", ";" oder " " -beginnt, wird als Kommentar behandelt. Nur verfügbar, wenn via NNTP gelesen -wird. -.TP -\fBNNTPServer\fP -Vollständig qualifizierter Domänenname des Newsservers. Eine einfache -IPv6\-Adresse muss in eckige Klammern gesetzt werden. Zusätzlich kann ein -Port durch Anhängen von :portnumber angegeben werden. Wenn ein Port -angegeben wird, überschreibt er jeden Port, der mit \*(rq\fB\-g\fP\*(rq oder \*(rq\fB\-p\fP\*(rq -angegeben oder durch \*(rq\fB\-T\fP\*(rq oder \*(rq\fB\-k\fP\*(rq impliziert oder über -$\fBNNTPPORT\fP gesetzt wurde. Die Zeichenfolge "default" oder "*" fungiert als -Platzhalter für die Übereinstimmung mit jedem Namen. Eine solche Zeile -sollte an letzter Stelle stehen. -.TP -\fBnewsrc\fP -Zugehöriges newsrc. Eine mit \*(rq\fB\-f\fP\*(rq angegebene Datei hat eine höhere -Priorität. -.TP -\fBKurzname\fP -nickname(s) for the nntpserver. Nicknames must not contain ":" and must be -unique. -.TP -Beispiel: -.RS -# Beispiel newsrctable\-Datei -.br -news.tin.org .newsrc\-tin.org tinorg -.br -news.example.org /tmp/nrc\-ex example ex -.br -[::1]:1119 /tmp/localhost6\-1119 lh6 -.br -# Catch\-All\-Regeln sollten an letzter Stelle stehen -.br -# mit der spezifischeren Regel an erster Stelle -.br -*:563 ~/.tin/newsrcs/${NNTPSERVER\-localhost}:563/newsrc -.br -* ~/.tin/newsrcs/${NNTPSERVER\-localhost}/newsrc -.RE -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/posted\fP -.sp -.RS -Verlaufsliste der geposteten Artikel. Die Datei wird von \fB\%tin\fP(1) -geschrieben und vom Befehl \fBDisplayPostHist\fP ('\fBW\fP') verwendet. Sie sollte -nicht manuell verändert werden. Jede Zeile, die mit "#" beginnt, ist ein -Kommentar. Leerzeilen werden ignoriert. Alle anderen Zeilen müssen aus -mindestens vier durch Pipes getrennten Feldern bestehen, beginnend mit einem -Zeitstempel "dd\-mm\-yy", einem einzelnen Buchstaben, der die Aktion angibt, -die die Nachricht ausgelöst hat, einem Gruppennamen oder einer Mailadresse, -an die die Nachricht gesendet wurde, dem Subject der Nachricht und optional -der \*(rqMessage\-ID\*(rq der Nachricht, falls bekannt. -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/Mail/posted\fP -.sp -.RS -Kopie aller geposteten Artikel im \fB\%mbox\fP(5)\-Format. Der Dateiname kann -durch setzen von \fBposted_articles_file\fP geändert werden. -.RE -.PP - -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/postponed.articles\fP -.sp -.RS -Vorrat an zurückgestellten Artikeln. Diese Datei benutzt das -\fB\%mbox\fP(5)\-Format. -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/motd\fP -.fi -.sp -.RS -This file is a copy of the servers message of the day (MOTD) message. It is -automatically created on startup except when using the \*(rq\fB\-Q\fP\*(rq -command\-line option and is unlinked on exit. -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/msglog\fP -.fi -.sp -.RS -Datei zum Speichern von $\fBNNTPSERVER\fP und $\fBNNTPPORT\fP bezogenen Info\- und -Fehlermeldungen. Die Datei wird beim Start überschrieben und ist zur -Debuggen gedacht. -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/newsgroups\fP -.fi -.sp -.RS -Eine Kopie der Newsgroups\-Datei des Servers, die kurze Beschreibungen jeder -Newsgruppe enthält. Sie wird beim Start automatisch aktualisiert, außer wenn -die Befehlszeilenoption \*(rq\fB\-X\fP\*(rq oder \*(rq \fB\-q\fP\*(rq verwendet werden und eine -alte Kopie existiert. Jede Zeile besteht aus zwei tabulatorgetrennten -Feldern "\fIGruppen.Name\fP \fIKurzbeschreibung\fP". -.TP -\fBGruppen.Name\fP -ist der Name der Newsgruppe -.TP -\fBKurzbeschreibung\fP -ist die zugehörige Kurzbeschreibung -.RE -.PP - -.nf -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/$NNTPSERVER${NNTPPORT:+":$NNTPPORT"}/serverrc\fP -.fi -.sp -.RS -File to store $\fBNNTPSERVER\fP and $\fBNNTPPORT\fP related data via a list of -"\fIvariable\fP=\fIvalue\fP" pairs. Currently there are only a few variables, all -are not meant to be changed by the user. -.TP -\fBversion\fP -Interne Versionsnummer. -.TP -\fBmotd_hash\fP -Interner Hash der MOTD des Servers, damit dessen Anzeige übersprungen werden -kann, falls dieser unverändert ist. -.TP -\fBlast_newnews\fP -Interner Zeitstempel, der von \fB\%tin\fP(1) verwendet wird, um neue -Newsgruppen auf dem Server zu erkennen. -.RE -.PP - -.\" tin uses inns old (pre 2.x) Path convention. -.\" as with inn >= 2.2.x getting more and more popular -.\" we should think about checking for the new Paths (/news/etc/) -.\" .IR ${TIN_LIBDIR\-"/news/etc"}/tinrc -\fI/etc/tin/tinrc\fP -.br -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP -.sp -.RS -At startup, \fB\%tin\fP(1) reads in the configuration file. This contains a -list of "\fIvariable\fP=\fIvalue\fP" pairs that can be used to configure the way -\fB\%tin\fP(1) works. \fIvalue\fP strings are limited to 1022 chars and will be -discarded if exceeding this limit. If it exists, the global configuration -file, \fI${TIN_LIBDIR:\-NEWSLIBDIR}/tinrc\fP is read first. After that, the -user's own configuration file \fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP is -read. The global file is useful for distributing system\-wide defaults to new -users who have no private tinrc yet (see also \fB/etc/tin/tin.defaults\fP). -.TP -\fBabbreviate_groupname\fP -Falls ON werden, sofern nötig, lange Newsgruppennamen in der Auswahl\- und -Artikelebene wie folgt abgekürzt: news.software.readers \-> -n.software.readers \-> n.s.readers \-> n.s.r. Voreinstellung ist OFF. -.TP -\fBadd_posted_to_filter\fP -Falls ON füge gepostete Artikel die einen neuen Thread einleiten zum Filter -hinzu um eventuelle Antworten hervorzuheben. Voreinstellung ist ON. -.TP -\fBadvertising\fP -Falls ON füge 'User\-Agent:'\-Kopfzeile ein. Voreinstellung ist ON. -.TP -\fBalternative_handling\fP -Falls ON entsorge multipart/alternative Teile des Artikels -automatisch. Voreinstellung ist ON. -.TP -\fBart_marked_deleted\fP -Zeichen das anzeigt, dass ein Artikel gelöscht wurde. Voreinstellung ist -\&'D'. -.TP -\fBart_marked_inrange\fP -Zeichen mit dem angezeigt wird, dass sich ein Artikel in einem Bereich -befindet. Voreinstellung ist '#'. -.TP -\fBart_marked_return\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel als ungelesener -Artikel zurückkehrt, wenn die Gruppe das nächste Mal betreten -wird. Voreinstellung ist '\-'. -.TP -\fBart_marked_selected\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread -automatisch ausgewählt ist (heiß). Voreinstellung ist '*'. -.TP -\fBart_marked_recent\fP -Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread neu ist -(nicht älter als X Tage). Siehe auch \fBrecent_time\fP. Voreinstellung ist ' -o'. -.TP -\fBart_marked_unread\fP -Zeichen das anzeigt, dass ein Artikel noch nicht gelesen -wurde. Voreinstellung ist '+'. -.TP -\fBart_marked_read\fP -Zeichen das anzeigt, dass ein Artikel schon gelesen wurde. Voreinstellung -ist ' '. -.TP -\fBart_marked_killed\fP -Zeichen das anzeigt, dass ein Artikel gekillt wurde. Voreinstellung ist -\&'K'. \fBkill_level\fP muss passend gesetzt sein. -.TP -\fBart_marked_read_selected\fP -Zeichen, das verwendet wird, um anzuzeigen, dass ein Artikel automatisch -ausgewählt (heiß) war, bevor er gelesen wurde. Standard ist -\&':'. \fBkill_level\fP muss entsprechend eingestellt werden. -.TP -\fBStart des MIME\-Viewers bestätigen (ask_for_metamail)\fP -If ON \fB\%tin\fP(1) will ask before using a MIME viewer (\fBmetamail_prog\fP) to -display MIME messages. This only occurs if a MIME viewer is set. Default is -OFF. -.TP -\fBattachment_format\fP -Diese Formatanweisung wird von \fB\%tin\fP(1) zur Darstellung der Anhangsebene -benutzt. Voreingestellt ist "%t%s%e%c%d". -.TP -\fBauto_cc_bcc\fP -Setzt Ihren Namen automatisch in das Feld \*(rqCc:\*(rq und/oder \*(rqBcc:\*(rq, wenn -Sie einen Artikel versenden. Die Voreinstellung ist Nein. -.TP -\fBauto_list_thread\fP -Falls ON: Thread beim Betreten mit der rechten Cursortaste automatisch -anzeigen? Voreinstellung ist ON. -.TP -\fBauto_reconnect\fP -Automatisch Verbindung zum Server wiederherstellen. Voreinstellung ist OFF. -.TP -\fBbatch_save\fP -Falls ON werden Artikel/Threads im Batchmode gespeichert wenn \*(rq\fB\-S\fP\*(rq oder -gemailt, wenn \*(rq\fB\-M\fP\*(rq bzw. \*(rq\fB\-N\fP\*(rq in der Kommandozeile angegeben -wurde. Voreinstellung ist ON. -.TP -\fBbeginner_level\fP -Falls diese Funktion eingeschaltet ist (ON), wird am unteren Bildschirmrand -für jede Ebene ein Mini\-Menü mit den nützlichsten Befehlen -angezeigt. Außerdem wird nach dem Verfassen eines Artikels ein kurzer -Posting\-Knigge angezeigt. Standard ist ON. -.TP -\fBcache_overview_files\fP -If ON, create local copies of NNTP overview files. This can be used to -considerably speed up accessing large groups when using a slow connection. -Default is OFF. -.TP -\fBcompress_overview_files\fP -If ON, locally cached NNTP overview files (\fBcache_overview_files\fP) are -saved in compressed form (\fBRFC\%1952\fP). Useful to reduce local disk space -used. Default is OFF. -.TP -\fBcancel_lock_algo\fP -Diesen Hash\-Algorithmus für Cancel\-Locks verwenden. Nur vorhanden falls -\fBtin\fP mit Cancel\-Lock\-Unterstützung gebaut wurde. Keiner deaktiviert die -Erzeugung von Cancel\-Locks. Gültige Werte sind Keiner, sha1, sha256 und -sha512. Voreinstellung ist sha1. -.TP -\fBcatchup_read_groups\fP -Falls auf ON gestellt, wird der Benutzer beim Beenden gefragt, ob alle -während der aktuellen Sitzung gelesenen Gruppen als gelesen markiert werden -sollen. Voreinstellung ist OFF. -.TP -\fBcol_back\fP -Standard Hintergrundfarbe -.TP -\fBcol_extquote\fP -Farbe des Fremdzitat\-Textes -.TP -\fBcol_from\fP -Farbe des Autors (From:) -.TP -\fBcol_head\fP -Farbe der Artikelheaderzeilen -.TP -\fBcol_help\fP -Farbe des Hilfstext -.TP -\fBcol_invers_bg\fP -Hintergrundfarbe für inversen Text -.TP -\fBcol_invers_fg\fP -Vordergrundfarbe für inversen Text -.TP -\fBcol_markdash\fP -Farbe der hervorgehobenen Wörter wie _hier_. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBcol_markslash\fP -Farbe der hervorgehobenen Wörter wie /hier/. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBcol_markstar\fP -Farbe der hervorgehobenen Wörter wie *hier*. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBcol_markstroke\fP -Farbe der hervorgehobenen Wörter wie \-hier\-. Siehe auch -\fBword_h_display_marks\fP und \fBword_highlight\fP. -.TP -\fBcol_message\fP -Farbe der Statusmeldungen in der letzten Zeile -.TP -\fBcol_minihelp\fP -Farbe des Minihilfemenü -.TP -\fBcol_newsheaders\fP -Farbe des angezeigten Headers -.TP -\fBcol_normal\fP -Standard Vordergrundfarbe -.TP -\fBcol_quote\fP -Farbe der zitierten Zeilen -.TP -\fBcol_quote2\fP -Farbe von zweifach zitierten Zeilen -.TP -\fBcol_quote3\fP -Farbe von =>3\-fach zitierten Zeilen -.TP -\fBcol_response\fP -Farbe des Antwortzählers. Das ist der Text "Antwort x von y" im -Artikel\-Viewer. -.TP -\fBcol_signature\fP -Farbe von Signaturen -.TP -\fBcol_score_neg\fP -Farbe negativer Bewertung -.TP -\fBcol_score_pos\fP -Farbe positiver Bewertung -.TP -\fBcol_urls\fP -Farbe der hervorgehobenen URLs -.TP -\fBcol_verbatim\fP -Farbe des wortgetreu darzustellenden Textes -.TP -\fBcol_subject\fP -Farbe der Subjectzeile -.TP -\fBcol_text\fP -Farbe der Textzeilen -.TP -\fBcol_title\fP -Farbe des Hilfe/Mail\-Zeichens -.TP -\fBconfirm_choice\fP -\fB\%tin\fP(1) can ask for manual confirmation to protect the user. Available -choices: -.in +0.5i -.\" TODO: check if all affected commands are marked [after confirmation] -\fBcommands\fP: Ask for confirmation before executing certain dangerous -commands (e.g., \fBCatchup\fP ('\fBc\fP')). Commands that this affects are marked -in this manual with '[after confirmation]'. -.sp -\fBquit\fP: You'll be asked to confirm that you wish to exit \fB\%tin\fP(1) when -you use the \fBQuit\fP ('\fBq\fP') command. -.sp -\fBselect\fP: Ask for confirmation before marking all not selected (with -\fBGroupMarkUnselArtRead\fP ('\fBX\fP') command) articles as read. -.in -0.5i -Voreinstellung ist Kommandos & Ende. -.TP -\fBdate_format\fP -Format string used for date representation. A description of the different -format options can be found at \fB\%strftime\fP(3). \fB\%tin\fP(1) uses -\fB\%strftime\fP(3) when available and supports most format options in his -fallback code. Default is "%a, %d %b %Y %H:%M:%S". -.TP -\fBdefault_art_search\fP -.TP -\fBdefault_author_search\fP -.TP -\fBdefault_config_search\fP -Der letzte Artikel/Autor/Konfigurationsoption, nach dem gesucht wurde. -.TP -\fBdefault_filter_days\fP -Voreinstellung ist 28. -.TP -\fBdefault_filter_kill_case\fP -Standard für schnellen (1 Taste) Kill\-Filter. ON = Groß\-/Kleinschreibung -berücksichtigen, OFF = Groß\-/Kleinschreibung ignorieren. -.TP -\fBdefault_filter_kill_expire\fP -Standard für schnellen (1\-Taste) Kill\-Filter\-Ablauf. ON = auf -\fBdefault_filter_days\fP begrenzen, OFF = niemals ablaufen. Standard ist OFF. -.TP -\fBdefault_filter_kill_global\fP -Standard für schnellen (1\-Taste) Kill\-Filter global. ON = auf alle Gruppen -anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON. -.TP -\fBdefault_filter_kill_header\fP -Voreinstellung für Schnell (1 Tasten) Killfilter Header. -.in +0.3i -.nf -.ta \w'0,1 'u +\w'\'\'Message\-ID:\'\' & letzter \'\'References:\'\' Eintrag'u -0 \*(rqSubject:\*(rq (Groß/Kleinschreibung beachten) -1 \*(rqSubject:\*(rq (Groß/Kleinschreibung ignorieren) -2 \*(rqFrom:\*(rq (Groß/Kleinschreibung beachten) -3 \*(rqFrom:\*(rq (Groß/Kleinschreibung ignorieren) -4 \*(rqMessage\-ID:\*(rq & alle \*(rqReferences:\*(rq Einträge -5 \*(rqMessage\-ID:\*(rq & letzter \*(rqReferences:\*(rq Eintrag -6 \*(rqMessage\-ID:\*(rq allein -7 \*(rqLines:\*(rq -.fi -.in -0.3i -.TP -\fBdefault_filter_select_case\fP -Standard für den schnellen (1 Taste) automatischen Auswahlfilter. EIN = -Groß\-/Kleinschreibung berücksichtigen, AUS = Groß\-/Kleinschreibung -ignorieren. -.TP -\fBdefault_filter_select_expire\fP -Standard für schnellen (1\-Taste) Auto\-Auswahlfilter\-Ablauf. ON = auf -\fBdefault_filter_days\fP begrenzen, OFF = niemals ablaufen. Standard ist OFF. -.TP -\fBdefault_filter_select_global\fP -Standard für schnellen (1\-Taste) Auto\-Auswahlfilter global. ON = auf alle -Gruppen anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON. -.TP -\fBdefault_filter_select_header\fP -Standardheader für den Filter mit schneller automatischer Auswahl (1 Taste). -.in +0.3i -.nf -.ta \w'0,1 'u +\w'\'\'Message\-ID:\'\' & letzter \'\'References:\'\' Eintrag'u -0 \*(rqSubject:\*(rq (Groß/Kleinschreibung beachten) -1 \*(rqSubject:\*(rq (Groß/Kleinschreibung ignorieren) -2 \*(rqFrom:\*(rq (Groß/Kleinschreibung beachten) -3 \*(rqFrom:\*(rq (Groß/Kleinschreibung ignorieren) -4 \*(rqMessage\-ID:\*(rq & alle \*(rqReferences:\*(rq Einträge -5 \*(rqMessage\-ID:\*(rq & letzter \*(rqReferences:\*(rq Eintrag -6 \*(rqMessage\-ID:\*(rq allein -7 \*(rqLines:\*(rq -.fi -.in -0.3i -.TP -\fBdefault_goto_group\fP -.TP -\fBdefault_group_search\fP -.TP -\fBdefault_mail_address\fP -.TP -\fBdefault_move_group\fP -.TP -\fBdefault_pattern\fP -.TP -\fBdefault_pipe_command\fP -.TP -\fBdefault_post_newsgroups\fP -.TP -\fBdefault_post_subject\fP -.TP -\fBdefault_range_group\fP -.TP -\fBdefault_range_select\fP -.TP -\fBdefault_range_thread\fP -.TP -\fBdefault_repost_group\fP -.TP -\fBdefault_save_file\fP -.TP -\fBdefault_save_mode\fP -.TP -\fBdefault_select_pattern\fP -.TP -\fBdefault_shell_command\fP -.TP -\fBdefault_subject_search\fP -.TP -\fBdont_break_words\fP -Lange Zeilen nicht innerhalb eines Wortes Umrechen. Dies gilt für den -Artikelkörper mit Ausnahme von wortgetreuen Blöcken. Siehe auch -\fBwrap_column\fP. Die Voreinstellung ist OFF. -.TP -\fBdraw_arrow\fP -Ermöglicht die Auswahl von Gruppen/Artikeln mit einem Pfeil '\->', wenn -aktiviert, oder durch eine hervorgehobene Leiste, wenn deaktiviert. Der -Standardwert ist OFF. -.TP -\fBeditor_format\fP -The format string used to create the editor start command with parameters. -Default is '%E +%N %F' with %E=Editor, %N=Linenumber and %F=Filename (e.g., -/bin/vi +7 .article). See also $\fBVISUAL\fP and $\fBEDITOR\fP under "ENVIRONMENT" -in \fB\%tin\fP(1) -.TP -\fBextquote_handling\fP -Falls ON werden Fremdzitate in Artikeln erkannt. Voreinstellung ist ON. -.TP -\fBextquote_regex\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_extquote\fP. If \fBextquote_regex\fP is blank, -then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBforce_screen_redraw\fP -Legt fest, ob nach bestimmten externen Befehlen immer ein Neuaufbau des -Bildschirms durchgeführt werden soll. Standard ist OFF. -.TP -\fBgetart_limit\fP -If \fBgetart_limit\fP is > 0 not more than the last \fBgetart_limit\fP -articles/group are fetched from the server. If \fBgetart_limit\fP is < 0 -\fB\%tin\fP(1) will start fetching articles from your first unread minus -absolute value of \fBgetart_limit\fP. Default is 0, which means no limit. -.TP -\fBgoto_next_unread\fP -Which keys \fB\%tin\fP(1) should accept to jump to the next unread article. -Possible is any combination of \fBPageDown\fP and \fBPageNextUnread\fP. When -\fBPageDown\fP is set \fB\%tin\fP(1) jumps to the next article at the end of the -current one. When \fBPageNextUnread\fP is set \fB\%tin\fP(1) jumps immediately to -the next article when \fBPageNextUnread\fP ('\fB\fP') is -pressed. Default is \fBPageNextUnread\fP. -.TP -\fBgroup_catchup_on_exit\fP -Falls ON: Catchup (als gelesen markieren) der Gruppe beim Verlassen mit der -linken Cursortaste. Voreinstellung ist ON. -.TP -\fBgroup_format\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Gruppenebene -benutzt. Voreingestellt ist "%n\ %m\ %R\ %L\ \ %s\ \ %F". Folgende -Ersetzungen werden unterstützt: -.in +0.3i -.nf -.ta \w'%G 'u +\w'Absender, Name und/oder E\-Mail Adresse'u -%D Datum -%F Absender, Name und/oder E\-Mail Adresse -%I Initialen des Absenders -%L Anzahl der Zeilen -%M Message\-ID -%R Anzahl der Antworten im Thread -%S Bewertung -%m Artikelkennzeichnungen -%n aktuelle Threadnummer -%s Subject -%% % -.fi -.in -0.3i -.TP -\fBhide_uue\fP -Falls auf 'Nein' gesetzt, werden die Rohdaten im uuencoded Format -angezeigt. Wenn auf 'Ja' gesetzt, werden Abschnitte von uuencoded Daten mit -einer einzigen Tag\-Zeile angezeigt, die die Größe und den Dateinamen zeigt -(ähnlich wie ein MIME\-Anhang). Falls auf 'Alle ausblenden' gesetzt, wird -jede Zeile, die wie uuencoded Daten aussieht, in eine Tag\-Zeile -umgewandelt. Dies ist nützlich, wenn uuencoded Daten über mehr als einen -Artikel verteilt sind, kann aber auch zu falschen Positiven führen. Diese -Einstellung kann auch im Artikelbetrachter umgeschaltet werden. Der -Standardwert ist 'Nein'. -.TP -\fBinews_prog\fP -Pfad, Name und Optionen des externen \fB\%inews\fP(1). Wenn Sie über NNTP -lesen, ist der Standardwert "\-\-internal" (verwende eingebautes NNTP inews), -ansonsten ist es "inews \-h". Der Artikel wird mittels '< Artikel' an -\fBinews_prog\fP via STDIN übergeben. -.TP -\fBinfo_in_last_line\fP -Wenn ON, zeigen Sie die aktuelle Gruppenbeschreibung oder den Artikelbereich -in der letzten Zeile an (nicht im Pager und im globalen Menü) \(em -\fBToggleInfoLastLine\fP ('\fBi\fP') wechselt die Einstellung. Diese Funktion ist -nützlich, da die volle Breite des Bildschirms zur Verfügung steht, um lange -Betreffzeilen anzuzeigen. Voreinstellung ist OFF. -.TP -\fBinteractive_mailer\fP -If greater than 0 your mailreader will be invoked earlier for reply so you -can use more of its features (e.g., MIME, pgp, ...). 1 means include -headers, 2 means don't include headers (old use_mailreader_i=ON option). 0 -turns off usage. This option has to suit \fBmailer_format\fP. Default is 0. -.TP -\fBinverse_okay\fP -Falls ON: inverse Darstellung für Header und das Hervorheben von URLs -benutzen. Voreinstellung ist ON. -.TP -\fBkeep_dead_articles\fP -Wenn ON, alle fehlgeschlagenen Beiträge in -\fI${TIN_HOMEDIR:\-"$HOME"}/dead.articles\fP behalten, zusätzlich zum Speichern -des letzten fehlgeschlagenen Beitrags in -\fI${TIN_HOMEDIR:\-"$HOME"}/dead.article\fP. Die Voreinstellung ist ON. -.TP -\fBkill_level\fP -This option controls the processing and display of articles that are -killed. There are 3 options, default is 0 (\fBKill only unread arts\fP). -.RS +1i -.IP 0 3 -\fBKill only unread arts\fP is the 'traditional' behavior of \fB\%tin\fP(1). Only -unread articles are killed once only by marking them read. As filtering only -happens on unread articles with \fBkill_level\fP set to 0, \fBart_marked_killed\fP -and \fBart_marked_read_selected\fP are only shown once. When you reenter the -group the mark will be gone. -.IP 1 -\fBKillt alle Artikel, markiert mit K\fP wird auf alle Artikel in der Gruppe -angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls -diese Option verwendet wird. Gelöschte Artikel werden wie gewohnt in Threads -angezeigt, sind jedoch mit \fBart_marked_killed\fP markiert. -.IP 2 -\fBKillt alle Artikel, zeigt sie nie\fP wird alle Artikel in der Gruppe -angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls -diese Option verwendet wird. Gelöschte Artikel werden überhaupt nicht -angezeigt. -.RE -.TP -\fBmail_8bit_header\fP -Erlaubt unkodierte 8\-Bit\-Zeichen im Header von E\-Mail\-Nachrichten. Der -Standardwert ist OFF. Das Aktivieren hat nur Wirkung, wenn -\fBmail_mime_encoding\fP auch auf 8bit gesetzt ist. Das Beibehalten auf OFF ist -für die meisten Benutzer sicher und entspricht dem Internet Mail Standard -(\fBRFC\%5322\fP und \fBRFC\%2047\fP). Die Voreinstellung ist OFF. -.TP -\fBmail_address\fP -E\-Mail\-Adresse des Benutzers (und vollständiger Name), falls nicht -benutzername@host. Wird beim Erstellen von Artikeln, beim Versenden von -E\-Mails und beim Signieren mit \fB\%pgp\fP(1) verwendet. -.TP -\fBmail_mime_encoding\fP -MIME\-Kodierung des Textkörpers in E\-Mail\-Nachrichten falls erforderlich -(8bit, base64, quoted\-printable, 7bit). Voreinstellung ist quoted\-printable. -.TP -\fBmail_quote_format\fP -Format der Einleitungszeile für Mailantworten (%A=Mailadresse, %D=Datum, -%F=Name und Adresse, %G=Name der Gruppe, %M=Message\-ID, %N=Name des Autors, -%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere -Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist "In article -%M you wrote:". -.TP -\fBmailbox_format\fP -Select one of the following mailbox\-formats: MBOXO (default, except on SCO), -MBOXRD or MMDF (default on SCO). See \fB\%mbox\fP(5) and \fBRFC\%4155\fP for more -details on MBOXO and MBOXRD and \fB\%mmdf\fP(5) for more details about MMDF. -.TP -\fBmaildir\fP -The directory where articles/threads are to be saved in \fB\%mbox\fP(5) -format. This feature is mainly for use with the \fB\%mutt\fP(1) mail -program. It allows the user to save articles/threads/groups simply by giving -\&'=' as the filename to save to. Default is \fI${TIN_HOMEDIR:\-"$HOME"}/Mail\fP. -.TP -\fBmailer_format\fP -The format string used to create the mailer command with parameters that is -used for mailing articles to other people. Default is '%M "%T" < %F' -(e.g., /bin/mail "iain" < ~/.article). The flexible format allows other -mailers with different command line parameters to be used such as -.in +0.3i -.nf -sendmail \-oem \-t < %F -mutt \-H %F -claws\-mail \-\-compose "mailto:%T?subject=%S&insert=%F" -.fi -.in -0.3i -\fBinteractive_mailer\fP muss passend dazu gesetzt sein. Folgende Ersetzungen -werden unterstützt: -.in +0.3i -.nf -.ta \w'%S'u +\w'default_mailer'u -%F Dateiname -%M default_mailer -%S Subject\-Feld -%T To\-Feld -%U Benutzername -%% % -.fi -.in -0.3i -.TP -\fBmark_saved_read\fP -Falls ON werden gespeicherte Artikel als gelesen markiert. Voreinstellung -ist ON. -.TP -\fBmark_ignore_tags\fP -When this is ON, the \fBGroupMarkThdRead\fP ('\fBK\fP'), \fBThreadMarkArtRead\fP -('\fBK\fP'), \fBMarkThdUnread\fP ('\fBZ\fP') at Group level and \fBMarkArtUnread\fP -('\fBz\fP') at Thread level functions mark just the current article or thread, -ignoring other tagged, (un)read articles. When OFF, the same function -presents a menu with choices of the current thread or article, all tagged, -unread articles, or nothing. -.TP -\fBmetamail_prog\fP -Path, name and options of external \fB\%metamail\fP(1) program used to view -non\-textual parts of articles. To use the built\-in viewer, set to -\-\-internal. This is the default value when \fB\%metamail\fP(1) is not -installed. Leave it blank if you don't want any automatic viewing of -non\-textual attachments. The \fBPageViewAttach\fP ('\fBV\fP') command can always -be used to manually view any attachments. See also \fBask_for_metamail\fP. -.TP -\fBmm_charset\fP -Charset supported locally, which is also used for MIME header (charset -parameter and charset name in header encoding) in mail and news postings. If -\fBMIME_STRICT_CHARSET\fP is defined at compile time, text in charset other -than the value of this parameter is considered not displayable and -represented as '?'. Otherwise, all character sets are regarded as compatible -with the display. If it's not set, the value of the environment variable -$\fBMM_CHARSET\fP is used. US\-ASCII or compile\-time default is used in case -neither of them is defined. If your system supports \fB\%iconv\fP(3) or -\fB\%ucnv_*\fP(), this option is disabled and you should use -\fBmm_network_charset\fP instead. -.TP -\fBmm_network_charset\fP -Charset used for posting and MIME headers; replaces \fBmm_charset\fP. -Conversion between \fBmm_network_charset\fP and local charset (determined via -\fB\%nl_langinfo\fP(3)) is done via \fB\%iconv\fP(3) or \fB\%ucnv_*\fP(), if none -of these functions are available on your system this option is disabled and -you have to use \fBmm_charset\fP instead. \fBmm_network_charset\fP is limited to -one of the following charsets: -.in +0.3i -US\-ASCII, ISO\-8859\-{1,2,3,4,5,7,9,10,13,14,15,16}, KOI8\-{R,U,RU} -EUC\-{CN,JP,KR,TW}, ISO\-2022\-{CN,CN\-EXT,JP,JP\-1,JP\-2}, Big5, UTF\-8 -.in -0.3i -Not all values might work on your system, see \fB\%iconv_open\fP(3) for more -details. If it's not set, the value of the environment variable -$\fBMM_CHARSET\fP is used. US\-ASCII or compile\-time default is used in case -neither of them is defined. -.TP -\fBmono_markdash\fP -Character attribute of words emphasized like _this_. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBmono_markslash\fP -Character attribute of words emphasized like /this/. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBmono_markstar\fP -Character attribute of words emphasized like *this*. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBmono_markstroke\fP -Character attribute of words emphasized like \-this\-. It depends on your -terminal which attributes are usable. See also \fBword_h_display_marks\fP and -\fBword_highlight\fP. -.TP -\fBnewnews\fP -Interne Timer, die von \fB\%tin\fP(1) verwendet werden, um den Überblick über -neue Newsgroups zu behalten. Nicht ändern, es sei denn, Sie verstehen genau -wozu sie dienen. -.TP -\fBnews_headers_to_display\fP -Welche Header wollen Sie sehen. Wenn Sie _alle_ sehen wollen, setzen Sie ein -\&'*' als Wert ein. Dies ist die einzige Möglichkeit, um Platzhalter -(Wildcards) zu nutzen. Wenn Sie als Wert 'X\-' angeben, sehen Sie alle Header -die mit 'X\-' beginnen (wie X\-Alan oder X\-Pape). Sie können mehrere durch -Leerzeichen getrennte Werte angeben. Wenn Sie hier nichts definieren wird -diese Option deaktiviert. -.TP -\fBnews_headers_to_not_display\fP -Genau das Gleiche wie \fBnews_headers_to_display\fP, mit der Ausnahme, das es -das Gegenteil bewirkt. Wenn Sie dachten, das X\-Header eine tolle Sachen -waren, nun aber festgestellt haben, das dort einiges überflüssiges steht, -dann könnten Sie wie folgt vorgehen: \fBnews_headers_to_display=X\-\fP -\fBnews_headers_to_not_display=X\-Alan X\-Pape\fP Wenn Sie hier nichts angeben, -wird diese Option deaktiviert. -.TP -\fBnews_quote_format\fP -Format der Einleitungszeile für Newsartikel (%A=Mailadresse, %D=Datum, -%F=Name und Adresse, %G=Name der Gruppe, %M=Message\-ID, %N=Name des Autors, -%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere -Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist "%F -wrote:". -.TP -\fBnntp_read_timeout_secs\fP -Maximal n Sekunden auf eine Antwort vom Server warten (0 = kein -Zeitlimit). Voreinstellung ist 120. -.TP -\fBnormalization_form\fP -Normalisierungsart die verwenden soll um die Unicode\-Eingabe zu -normalisieren. Die möglichen Werte sind: -.RS +1i -.IP 0 3 -\fBNone\fP: keine Normalisierung -.IP 1 -\fBNFKC\fP: Kompatibilitätszerlegung, gefolgt von kanonischer Zusammensetzung -.IP 2 -\fBNFKD\fP: Kompatibilitätszerlegung -.IP 3 -\fBNFC\fP: Kanonische Zerlegung, gefolgt von kanonischer Zusammensetzung -.IP 4 -\fBNFD\fP: Kanonische Zerlegung -.IP 5 -\fBNFKC_CF\fP: Kompatibilitätszerlegung, gefolgt von kanonischer -Zusammensetzung und Faltung -.RE -Einige Normalisierungsarten sind nur verfügbar, wenn sie von der Bibliothek -unterstützt werden, die \fB\%tin\fP(1) für die Normalisierung verwendet. Nach -Möglichkeit sollte NFC verwendet werden (\fBRFC\%5198\fP). -.TP -\fBpage_mime_format\fP -Diese Formatanweisung wird von tin \fB\%tin\fP(1) zur Darstellung von -Mime\-Headern auf Artikelebene benutzt. Voreingestellt ist "[\-\- -%T%S%*n%z%*l%!c%!d%*e \-\-]". -.TP -\fBpage_uue_format\fP -Diese Formatanweisung wird von tin \fB\%tin\fP(1) zur Darstellung von -UUE\-Headern auf Artikelebene benutzt. Voreingestellt ist "[\-\- -%T%S%*n%I%!d%*e \-\-]". -.TP -\fBpos_first_unread\fP -Falls ON wird der Cursor auf den ersten ungelesenen Artikel in der Gruppe -gesetzt, andernfalls auf den letzten Artikel. -.TP -\fBpost_8bit_header\fP -Allows 8bit characters unencoded in the header of a news article, if set -this also disables the generation of MIME\-headers when they are usually -required. Default is OFF. Only enacted if \fBpost_mime_encoding\fP is also set -to 8bit. In a number of local hierarchies where 8bit characters are used, -using unencoded (raw) 8bit characters in header is acceptable and sometimes -even recommended so that you need to check the convention adopted in the -local hierarchy of your interest to determine what to do with this and -\fBpost_mime_encoding\fP. -.TP -\fBpost_mime_encoding\fP -MIME encoding of the body in news message, if necessary. (8bit, base64, -quoted\-printable, 7bit). Default is 8bit, which leads to no encoding. -base64 and quoted\-printable are usually undesired on usenet. -.TP -\fBpost_process_view\fP -If ON, then \fB\%tin\fP(1) will start an appropriate viewer program to display -any files that were post processed and uudecoded. The program is determined -using the \fB\%mailcap\fP(5) file. Default is ON. -.TP -\fBpost_process_type\fP -This specifies whether to perform post processing on saved articles. -Because the shell archive may contain commands you may not want to be -executed, be careful when extracting shell archives. The following values -are allowed: -.RS +1i -.IP 0 3 -\fBNein\fP (Voreinstellung), es wird keine Nachbearbeitung gemacht. -.IP 1 -\fBShell\-Archive\fP, Entpacken nur von mehrteiligen \fB\%shar\fP(1)\-Dateien. -.IP 2 -\fBJa\fP, binäre Anhänge und Daten werden dekodiert und gespeichert. -.RE -.TP -\fBposted_articles_file\fP -Keep posted articles in given file. If the given filename does not contain -any expandable strings it will be prefixed with -\fI${TIN_HOMEDIR:\-"$HOME"}/Mail/\fP. If no filename is set then postings will -not be saved. See the section "MAILING PIPING PRINTING REPOSTING AND SAVING -ARTICLES" for more information about the various expansion -characters. Default is 'posted'. -.TP -\fBprint_header\fP -If ON, then the full article header is sent to the printer. Otherwise only -the \*(rqSubject:\*(rq and \*(rqFrom:\*(rq fields are output. Default is OFF. -.TP -\fBprinter\fP -The printer program with options that is to be used to print articles. The -default is \fB\%lpr\fP(1) for BSD machines and \fB\%lp\fP(1) for SysV -machines. Printing from \fB\%tin\fP(1) may have been disabled by the System -Administrator. -.TP -\fBprocess_only_unread\fP -Falls ON speichere/drucke/pipe/maile nur ungelesene Artikel (markierte -Artikel ausgenommen). Voreinstellung ist OFF. -.TP -\fBprompt_followupto\fP -Falls ON zeige leere \*(rqFollowup\-To:\*(rq\-Kopfzeile im Editor. Voreinstellung -ist OFF. -.TP -\fBquote_chars\fP -The character used in quoting included text to article followups and mail -replies. The '_' character represents a blank character and is replaced with -\&' ' when read, %I is replaced by author's initials. If the article has -multiple addresses only the first is evaluated. Default is '>_'. -.TP -\fBquote_style\fP -This bit coded integer value controls how articles are to be quoted when -following up or replying to them. Any of the following options can be -combined by adding all relevant values. Default is 5, which means that quote -characters are compressed and empty lines are quoted. -.RS +1i -.IP 0 3 -\fBNichts besonderes\fP Nicht leere Zeilen zitieren. -.IP 1 -\fBCompress quotes\fP Compress quote characters together when quoting multiple -times (for example, '> > >' will be turned into -\&'>>>'). This option is on by default. -.IP 2 -\fBQuote Signatures\fP This option is off by default. Signatures are always -quoted regardless of this option when you are viewing an article in raw mode -\fBPageToggleRaw\fP ('\fB^H\fP') and followup or reply to it. Signatures are never -quoted regardless of this option when \fBshow_signatures\fP is off. -.IP 4 -\fBLeerzeilen zitieren\fP Diese Option ist standardmäßig aktiviert. -.RE -.TP -\fBquote_regex\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote\fP. If \fBquote_regex\fP is blank, then -\fB\%tin\fP(1) uses a built\-in default. -.TP -\fBquote_regex2\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote2\fP. If \fBquote_regex2\fP is blank, then -\fB\%tin\fP(1) uses a built\-in default. -.TP -\fBquote_regex3\fP -A regular expression that will be applied when reading articles. All -matching lines are shown in \fBcol_quote3\fP. If \fBquote_regex3\fP is blank, then -\fB\%tin\fP(1) uses a built\-in default. -.TP -\fBrecent_time\fP -Wenn auf 0 gesetzt, ist diese Funktion deaktiviert, ansonsten bedeutet es -die Anzahl der Tage. -.TP -\fBrender_bidi\fP -Falls ON, kümmert sich \fB\%tin\fP(1) um die Darstellung von bidirektionalem -Text. Bei OFF, überlässt \fB\%tin\fP(1) die Darstellung von bidirektionalem -Text dem Terminal. -.TP -\fBreread_active_file_secs\fP -The news \fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP file is -reread at regular intervals to show if any new news has arrived. Default is -1200. Setting this to 0 will disable this feature. -.TP -\fBsavedir\fP -Verzeichnis, in dem Artikel/Threads gespeichert werden. Voreinstellung ist -\fI${TIN_HOMEDIR:\-"$HOME"}/News\fP. -.TP -\fBscore_limit_kill\fP -If the score of an article is below or equal this value the article gets -marked as killed. -.TP -\fBscore_limit_select\fP -If the score of an article is above or equal this value the article gets -marked as hot. -.TP -\fBscore_kill\fP -Score of an article which should be killed, this must be <= -\fBscore_limit_kill\fP. -.TP -\fBscore_select\fP -Score of an article which should be marked hot, this must be >= -\fBscore_limit_select\fP. -.TP -\fBscroll_lines\fP -The number of lines that will be scrolled up/down in the article pager when -using cursor\-up/down. The default is 1 (line\-by\-line). Set to 0 to get -traditional \fB\%tin\fP(1) page\-by\-page scrolling. Set to \-1 to get -page\-by\-page scrolling where the top/bottom line is carried over onto the -next page. This setting supersedes \fBshow_last_line_prev_page\fP=ON. Set to -\-2 to get half\-page scrolling. This setting supersedes -\fBfull_page_scroll\fP=OFF. -.TP -\fBselect_format\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Auswahlebene -benutzt. Voreingestellt ist "%f\ %n\ %U\ \ %G\ \ %d". Folgende Ersetzungen -werden unterstützt: -.in +0.3i -.nf -.ta \w'%G 'u +\w'Anzahl ungelesener Artikel'u -%G Name der Gruppe -%U Anzahl ungelesener Artikel -%d Gruppenbeschreibung -%f Gruppenkennzeichnung -%n aktuelle Gruppennummer -%% % -.fi -.in -0.3i -.TP -\fBsort_function\fP -Sortierfunktion für Artikel. Voreinstellung ist 0. -.RS +.5i -.IP 0 3 -Mit \fB\%qsort\fP(3) sortieren. -.IP 1 -Mit \fB\%heapsort\fP(3) sortieren. Kann in großen Gruppen mit langen Threads -schneller sein. -.RE -.TP -\fBshow_author\fP -Welche Informationen über den Autor sollen angezeigt werden. Die -Voreinstellung ist 2, der vollständige Name des Autors. -.RS +1i -.IP 0 3 -\fBNichts\fP, nur die \*(rqSubject:\*(rq Zeile wird angezeigt. -.IP 1 -\fBAddress\fP, \*(rqSubject:\*(rq line & the address part of the \*(rqFrom:\*(rq line are -displayed. -.IP 2 -\fBFull Name\fP, \*(rqSubject:\*(rq line & the authors full name part of the -\&\*(rqFrom:\*(rq line are displayed (default). -.IP 3 -\fBAddress and Name\fP, \*(rqSubject:\*(rq line & all of the \*(rqFrom:\*(rq line are -displayed. -.RE -.TP -\fBshow_art_score\fP -Falls ON, wird die Bewertung bei der Anzeige von Artikeln in der unteren -linken Ecke gezeigt. Voreinstellung ist OFF. Siehe auch \fBcol_score_neg\fP und -\fBcol_score_pos\fP. -.TP -\fBshow_description\fP -If ON show a short group description text after newsgroup name at the group -selection level. The \*(rq\fB\-d\fP\*(rq command\-line flag will override the setting -and turn descriptions off. The text used is taken from the -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/newsgroups\fP file and if supported (requires -\fB\%tin\fP(1) to be built with mh\-mail\-handling support) from -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/mailgroups\fP for mailgroups. Default is ON. -.TP -\fBshow_help_mail_sign\fP -Auswahl ob \fB\%tin\fP(1) in den verschiedenen Ebenentiteln eine Hilfeanzeige, -eine neue E\-Mail\-Anzeige, beides oder keines von beiden anzeigt. Die -Voreinstellung ist 3. -.RS +1i -.IP 0 3 -\fBKein Hilfe\- oder Mailanzeige\fP. -.IP 1 -\fBNur Hilfe anzeigen\fP. -.IP 2 -\fBShow only mail sign if new mail\fP, show only the mail sign, and only if new -mail has arrived. -.IP 3 -\fBShow mail if new mail else help s.\fP, show mail sign if new mail has -arrived otherwise show help sign. -.RE -.TP -\fBshow_only_unread_arts\fP -Falls ON, werden nur neue/ungelesene Artikel angezeigt, andernfalls werden -alle Artikel angezeigt. -.TP -\fBshow_only_unread_groups\fP -Falls ON zeige nur abonnierte Gruppen mit ungelesen Artikeln. Voreinstellung -ist OFF. -.TP -\fBshow_signatures\fP -Falls OFF zeige keine Signaturen an. Voreinstellung ist ON. -.TP -\fBsigdashes\fP -Falls ON, wird der Signatur ein Signaturtrenner -vorangestellt. Voreinstellung ist ON. -.TP -\fBsigfile\fP -The path that specifies the signature file to use when posting, following up -to or replying to an article. If the path is a directory then the signature -will be randomly generated from files that are in the specified -directory. If a file named \fI.sigfixed\fP does exist in that dir or -\fI${TIN_HOMEDIR:\-"$HOME"}/.sigfixed\fP does exist it will be prepended to the -chosen signature (first match counts). If the path starts with a ! the -program the path points to will be executed to generate a signature. In -order to pass the group name to the program, %G can be specified. This will -be replaced by the name of the current newsgroup. \-\-none will suppress any -signature. Default is \fI${TIN_HOMEDIR:\-"$HOME"}/.Sig\fP. See also -\fI${TIN_HOMEDIR:\-"$HOME"}/.sigfixed\fP. -.TP -\fBsignature_repost\fP -Falls ON wird die Signatur auch an repostete Artikel -angehängt. Voreinstellung ist ON. -.TP -\fBslashes_regex\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markslash\fP or \fBmono_markslash\fP. If -\fBslashes_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBsort_article_type\fP -This specifies how articles should be sorted. Sort by ascending Date (6) is -the default. The following sort types are allowed: -.RS +1i -.IP 0 3 -\fBNichts\fP, keine Sortierung. -.IP 1 -\fBSubject: (absteigend)\fP, Artikel absteigend nach \*(rqSubject:\*(rq sortieren. -.IP 2 -\fBSubject: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqSubject:\*(rq sortieren. -.IP 3 -\fBFrom: (absteigend)\fP, Artikel absteigend nach \*(rqFrom:\*(rq sortieren. -.IP 4 -\fBFrom: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqFrom:\*(rq sortieren. -.IP 5 -\fBDate: (absteigend)\fP, Artikel absteigend nach \*(rqDate:\*(rq sortieren. -.IP 6 -\fBDate: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqDate:\*(rq sortieren. -.IP 7 -\fBBewertung (absteigend)\fP, Artikel absteigend nach Bewertung sortieren. -.IP 8 -\fBBewertung (aufsteigend)\fP, Artikel aufsteigend nach Bewertung sortieren. -.IP 9 -\fBLines: (absteigend)\fP, Artikel absteigend nach \*(rqLines:\*(rq sortieren. -.IP 10 -\fBLines: (aufsteigend)\fP, Artikel aufsteigend nach \*(rqLines:\*(rq sortieren. -.RE -.TP -\fBsort_threads_type\fP -This specifies how threads will be sorted. Sort by descending Score (1) is -the default. The following sort types are allowed: -.RS +1i -.IP 0 3 -\fBNichts\fP, keine Sortierung der Threads. -.IP 1 -\fBBewertung (absteigend)\fP, Threads absteigend nach Bewertung sortieren. -.IP 2 -\fBBewertung (aufsteigend)\fP, Threads aufsteigend nach Bewertung sortieren. -.IP 3 -\fBLast posting date (descending)\fP, sort threads by date of last posting -descending. -.IP 4 -\fBLast posting date (ascending)\fP, sort threads by date of last posting -ascending. -.RE -.TP -\fBspamtrap_warning_addresses\fP -Set this option to a list of comma\-separated strings to be warned if you are -replying to an article by mail where the e\-mail address contains one of -these strings. The matching is case\-insensitive. Example: -.sp -\fIspam,delete,remove\fP -.TP -\fBstars_regex\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markstar\fP or \fBmono_markstar\fP. If -\fBstars_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBstrip_blanks\fP -Strips the blanks from the end of each line therefore speeding up the -display when reading on a slow terminal or via modem. Default is ON. -.TP -\fBstrip_bogus\fP -Bogus groups are groups that are present in your -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP file that no longer exist on the news -server. There are 3 options. 0 means do nothing & always keep bogus groups. -1 means bogus groups will be permanently removed. 2 means that bogus groups -will appear on the Group Selection Menu, prefixed with a 'D'. This allows -you to unsubscribe from them as and when you wish. Default is 0 (Always -Keep). -.TP -\fBstrip_newsrc\fP -If ON, then unsubscribed groups will be permanently removed from your -\fI${TIN_HOMEDIR:\-"$HOME"}/.newsrc\fP file. Default is OFF. -.TP -\fBstrip_re_regex\fP -Ein regulärer Ausdruck zum Suchen nach Betreffpräfixen wie "Re:", die -entfernt werden sollen. Wenn \fBstrip_re_regex\fP leer ist, verwendet -\fB\%tin\fP(1) einen integrierten Standardwert. -.TP -\fBstrip_was_regex\fP -A regular expression to find Subject suffixes like "(was:" to remove. If -\fBstrip_was_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBstrokes_regex\fP -A regular expression that will be applied when reading articles. All -matching words are shown in \fBcol_markstroke\fP or \fBmono_markstroke\fP. If -\fBstrokes_regex\fP is blank, then \fB\%tin\fP(1) uses a built\-in default. -.TP -\fBtex2iso_conv\fP -Decode German style TeX umlaut codes to ISO If ON, show "a as Umlaut\-a, -etc. Default is OFF. This behavior can also be toggled in the article viewer -via \fBPageToggleTex2iso\fP ('\fB"\fP'). -.TP -\fBthread_articles\fP -Definiert wie der Diskussionsfaden gebaut werden soll. Zur Auswahl stehen: -.RS +1i -.IP 0 3 -Keinen Diskussionsfaden aufbauen. -.IP 1 -Diskussionsfaden nur anhand von \*(rqSubject:\*(rq aufbauen. -.IP 2 -Diskussionsfaden nur anhand von \*(rqReferences:\*(rq aufbauen. -.IP 3 -Diskussionsfaden anhand von \*(rqReferences:\*(rq und \*(rqSubject:\*(rq aufbauen -(Voreinstellung). -.IP 4 -Diskussionsfaden mehrteiliger Artikel anhand von 'Subject:\*(rq aufbauen. -.IP 5 -Anhand der prozentualen Übereinstimmung der Subjects gruppieren -.RE -It's also possible to set the threading type on a per group basis by setting -the group attribute variable \fBthread_articles\fP to 0 \(en 5 in the file -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/attributes\fP. -.TP -\fBthread_format\fP -Diese Formatanweisung wird von \fBtin\fP zur Darstellung der Threadebene -benutzt. Voreingestellt ist "%n\ %m\ \ [%L]\ \ %T\ \ %F". Folgende -Ersetzungen werden unterstützt: -.in +0.3i -.nf -.ta \w'%G 'u +\w'Subject und/oder Baumdarstellung des Thread'u -%D Datum -%F Absender, Name und/oder E\-Mail Adresse -%I Initialen des Absenders -%L Anzahl der Zeilen -%M Message\-ID -%S Bewertung -%T Subject und/oder Baumdarstellung des Thread -%m Artikelkennzeichnungen -%n aktuelle Artikelnummer -%% % -.fi -.in -0.3i -.TP -\fBthread_perc\fP -Defines how close the subjects must match while threading by Percentage -Match for threads to be considered part of a single thread. This value is in -the range 0 to 100. The default is 75. -.TP -\fBthread_catchup_on_exit\fP -Falls ON: Catchup (als gelesen markieren) der Gruppe/des Threads beim -Verlassen mit der linken Cursortaste. Voreinstellung ist ON. -.TP -\fBthread_score\fP -Wie die Gesamtpunktzahl eines Threads berechnet wird. Voreinstellung ist 0, -die maximale Punktzahl in diesem Diskussionsfaden (Thread). -.RS +1i -.IP 0 3 -\fBMax\fP, Maximalwert im Diskussionsfaden. -.IP 1 -\fBSum\fP, Summer aller Bewertungen im Diskussionsfaden. -.IP 2 -\fBAverage\fP, Durchschnitt aller Bewertungen im Diskussionsfaden. -.RE -.TP -\fBtls_ca_cert_file\fP -Name der Datei, die alle vertrauenswürdigen CA\-Zertifikate enthält, die für -NNTPS\-Verbindungen (\fBRFC\%8143\fP) verwendet werden. Falls es leer bleibt, -wird der Systemstandard verwendet. -.TP -\fBtranslit\fP -If ON append //TRANSLIT to the first argument of \fB\%iconv_open\fP(3) to -enable transliteration. This means that when a character cannot be -represented in the target character set, it can be approximated through one -or several similarly looking characters. On systems where this extension -doesn't exist, this option is disabled. Default is OFF. -.TP -\fBtrim_article_body\fP -Auswahl, wie \fB\%tin\fP(1) Leerzeilen in Artikelkörpern behandelt. Der -Voreinstellung ist 0. Diese Option wirkt sich nicht auf Zeilen innerhalb von -wortgetreu wiederzugebenden Textblöcken aus. -.RS +1i -.IP 0 3 -\fBArtikelrumpf nicht anpassen\fP. -.IP 1 -\fBFührende Leerzeilen überspringen\fP. -.IP 2 -\fBAbschließende Leerzeilen überspr.\fP. -.IP 3 -\fBFühr. & abschlies. Leerz. überspr.\fP, Führende und abschließende Leerzeilen -überspringen. -.IP 4 -\fBMehrere zwischen Textblöcken zusammenfassen\fP, Leerzeilen zwischen -Textblöcken zusammenfassen. -.IP 5 -\fBMehrere zwischen Textbl. zusammenfassen + führende Leerzeilen überspringen\fP, 4 + 1; Leerzeilen zwischen Textblöcken zusammenfassen und -führende Leerzeilen überspringen. -.IP 6 -\fBMehrere zwischen Textbl. zusammenfassen + abschließende Leerz. überspringen\fP, 4 + 2; Leerzeilen zwischen Textblöcken zusammenfassen -und abschließende Leerzeilen überspringen. -.IP 7 -\fBMehrere zwischen Textbl. zusammenf. + führende/abschließende Leerz. überspr.\fP, 4 + 3; Leerzeilen zwischen Textblöcken zusammenfassen und -führende sowie abschließende Leerzeilen überspringen -.RE -.TP -\fBsuppress_soft_hyphens\fP -Falls ON, werden weiche Bindestriche (U+00AD) von nicht wörtlichen Blöcken -bei der Artikelanzeige entfernt. Voreinstellung ist OFF. -.TP -\fBunderscores_regex\fP -Regulärer Ausdruck, der beim Lesen von Artikeln angewendet wird. Alle -passenden Wörter werden in \fBcol_markdash\fP oder \fBmono_markdash\fP -angezeigt. Falls \fBunderscores_regex\fP leer ist, verwendet \fB\%tin\fP(1) einen -integrierten Standardwert. -.TP -\fBunlink_article\fP -Falls ON entferne \fI${TIN_HOMEDIR:\-"$HOME"}/.article\fP nach dem -posten. Voreinstellung ist ON. -.TP -\fBurl_handler\fP -The program that will be run when launching URLs in the article viewer using -\fBPageViewUrl\fP ('\fBU\fP'). The actual URL will be appended. Default is -\fBurl_handler.pl\fP. -.TP -\fBurl_highlight\fP -Aktivieren der URL\-Hervorhebung im Artikel. Voreinstellung ist ON. -.TP -\fBuse_color\fP -Falls aktiviert verwendet \fB\%tin\fP(1) ANSI\-Farben. Die Voreinstellung ist -OFF. -.TP -\fBuse_keypad\fP -Navigationstasten auf dem Tastenfeld verwenden. Voreinstellung ist OFF. -.TP -\fBuse_mouse\fP -Allows the mouse button support in an \fB\%xterm\fP(1x) to be -enabled/disabled. Default is OFF. -.TP -\fBuse_slrnface\fP -If enabled \fB\%slrnface\fP(1) will be used to interpret the \*(rqX\-Face:\*(rq -header. For this option to have any effect, \fB\%tin\fP(1) must be running in -an \fB\%xterm\fP(1x) and \fB\%slrnface\fP(1) must be in your $\fBPATH\fP. Default -is OFF. -.TP -\fButf8_graphics\fP -If ON use UTF\-8 characters for indicator ('\->'), thread/attachment tree -and ellipsis ('...'). Default is OFF. -.TP -\fBverbatim_begin_regex\fP -Ein regulärer Ausdruck, der den Beginn eines wortgetreu wiederzugebenden -Absatzes findet. Voreinstellung ist #v+ -.TP -\fBverbatim_end_regex\fP -Ein regulärer Ausdruck, der das Ende eines wortgetreu wiederzugebenden -Absatzes findet. Voreinstellung ist #v\- -.TP -\fBverbatim_handling\fP -Falls ON werden wortgetreue Textblöcke in Artikeln erkannt. Voreinstellung -ist ON. -.TP -\fBPlatzhalter\fP -Allows you to select how \fB\%tin\fP(1) matches strings. The default is 0 and -uses the \fB\%wildmat\fP(3) notation, which is how this has traditionally been -handled. Setting this to 1 allows you to use \fB\%perl\fP(1) compatible -regular expressions \fB\%pcre\fP(3) or \fB\%pcre2\fP(3). (see also -\fB\%perlre\fP(1) and \fB\%pcrepattern\fP(3) or \fB\%pcre2pattern\fP(3)). You will -probably want to update your filter file if you use this regularly. NB: -Newsgroup names will always be matched using the \fB\%wildmat\fP(3) notation. -.TP -\fBword_h_display_marks\fP -Should the leading and ending stars, slashes, strokes and dashes also be -displayed, even when they are highlighting marks? -.RS +1i -.IP 0 3 -\fBnein\fP -.IP 1 -ja, \fBMarkierung\fP anzeigen -.IP 2 -ein \fBLeerzeichen\fP ausgeben -.RE -.TP -\fBword_highlight\fP -Enable word highlighting. See \fBword_h_display_marks\fP for the options -available. If \fBuse_color\fP is enabled the colors specified in -\fBcol_markdash\fP, \fBcol_markslash\fP, \fBcol_markstar\fP and \fBcol_markstroke\fP are -used for word highlighting else the character attributes specified in -\fBmono_markdash\fP, \fBmono_markslash\fP, \fBmono_markstar\fP and \fBmono_markstroke\fP -are used. Default is ON. -.TP -\fBwrap_column\fP -Sets the column at which a displayed article body should be wrapped. If -this value is equal to 0, it defaults to the current screen width. If this -value is greater than your current screen width and \fBdont_break_words\fP is -unset the part off\-screen is not displayed. Thus setting this option to a -large value can be used to disable wrapping. If this value is negative the -wrap margin is the current screen width plus the given value (as long as the -result is still positive, otherwise it will fall back to the current screen -width). Default is 0, wrapping at the current screen width. -.TP -\fBwrap_on_next_unread\fP -If enabled a search for the next unread article will wrap around all -articles to find also previous unread articles. If disabled the search stops -at the end of the thread list. Default is ON. -.TP -\fBxpost_quote_format\fP -Format ist das gleiche wie für \fBnews_quote_format\fP, dies wird verwendet, -wenn auf ein Crossposting in mehrere Gruppen geantwortet wird, ohne dass ein -\&\*(rqFollowup\-To:\*(rq angegeben ist. -.RE -.PP - -\fI/etc/tin/tin.defaults\fP -.sp -.RS -Yet another global configuration file with "\fIvariable\fP=\fIvalue\fP" -pairs. This one is for the more general options which usually can't be -controlled via \fI${TIN_LIBDIR:\-NEWSLIBDIR}/tinrc\fP and/or -\fI${TIN_HOMEDIR:\-"$HOME"}/.tin/tinrc\fP like resetting (to override the -built\-in default) the \fInewslibdir\fP. -.TP -\fBdomainname\fP -Setzt den globalen Domänennamen, der in From\-Zeilen verwendet wird -.TP -\fBorganization\fP -Legt den Namen Ihrer Organisation fest. $\fBORGANIZATION\fP überschreibt den -angegebenen Wert. -.TP -\fBnewslibdir\fP -Definiert den Standardspeicherort für einige Konfigurationsdateien. Übliche -Werte sind \fI/usr/lib/news\fP, \fI/var/lib/news\fP, \fI/usr/local/lib/news\fP oder -\fI/news/db\fP. $\fBTIN_LIBDIR\fP übersteuert den angegebenen Wert. -.TP -\fBbugaddress\fP -Definiert die E\-Mail\-Adresse, an die Benutzer Fehlerberichte über eine -integrierte Funktion senden können. Die Voreinstellung zeigt auf eine -Entwickler\-Mailingliste auf tin.org. Sie können diese Adresse in eine lokale -ändern, wenn Sie die Probleme Ihrer Benutzer selbst lösen wollen. -.TP -\fBinewsdir\fP -Definiert das Verzeichnis, welches das ausführbare \fB\%inews\fP(1) enthält. -.TP -\fBmm_charset\fP -Standardzeichensatz, der im \*(rqContent\-Type:\*(rq MIME\-Header verwendet werden -soll. $\fBMM_CHARSET\fP überschreibt den angegebenen Wert. -.TP -\fBpost_mime_encoding\fP -Voreingestellte Zeichenkodierung in MIME\-Artikeln. 8bit ist wahrscheinlich -die beste Wahl. -.TP -\fBmail_mime_encoding\fP -Voreingestellte Zeichenkodierung in MIME\-Mails. Quoted\-Printable ist hier -eine gute Wahl. -.TP -\fBdisable_gnksa_domain_check\fP -Unregistrierte Top\-Level\-Domains zulassen. Da die Liste der gültigen TLDs -nicht mehr aktiv gepflegt wird wurde ab \fB\%tin\fP(1) Version 2.1.5 die -Voreinstellung auf ON geändert. -.TP -\fBdisable_sender\fP -Keinen \*(rqSender:\*(rq Header erzeugen. Falls \fBinews_prog\fP nicht auf \-\-internal -steht wird die Einstellung ignoriert. -.TP -\fBspooldir\fP -Basisverzeichnis Ihres News\-Spools (Bnews, Cnews und INN traditioneller -Spool\-Stil), übliche Werte sind \fI/var/spool/news,\fP, \fI/usr/spool/news\fP, -\fI/news/spool\fP. $\fBTIN_SPOOLDIR\fP überschreibt einen angegebenen Wert. -.TP -\fBoverviewdir\fP -Basisverzeichnis Ihrer NOV Daten \fB\%newsoverview\fP(5) (traditioneller -Spool\-Stil, kann identisch mit \fIspooldir\fP sein), übliche Werte sind -\fI/var/spool/overview\fP, \fI/usr/spool/overview\fP, -\fI/news/overview\fP. $\fBTIN_NOVROOTDIR\fP überschreibt einen angegebenen Wert. -.TP -\fBoverviewfile\fP -Name einer Overview\-Datei, übliche Namen sind \fI.overview\fP oder -\fIover.view\fP. $\fBTIN_NOVFILENAME\fP übersteuert den angegebenen Wert. -.TP -\fBoverviewfmtfile\fP -Vollständiger Pfadname der overview.fmt\-Datei Ihres Newssystems; -normalerweise befindet sich die Datei in \fInewslibdir\fP und heißt -\fIoverview.fmt\fP, so dass Sie diese Einstellung nur ändern müssen wenn sich -Ihre Konfiguration unterscheidet. -.TP -\fBactivefile\fP -Vollständiger Pfadname der Aktive\-Datei Ihres Newssystems; normalerweise -befindet sich die Datei in \fInewslibdir\fP und heißt \fIactive\fP, so dass Sie -diese Einstellung nur ändern müssen wenn sich Ihre Konfiguration -unterscheidet. $\fBTIN_ACTIVEFILE\fP überschreibt einen angegebenen Wert. -.TP -\fBactivetimesfile\fP -Vollständiger Pfadname der active.times\-Datei Ihres Newssystems; -normalerweise befindet sich die Datei in \fInewslibdir\fP und heißt -\fIactive.times\fP, daher müssen Sie diese Einstellung nur ändern, wenn Ihre -Konfiguration abweicht. -.TP -\fBnewsgroupsfile\fP -Vollständiger Pfadname der Newsgroups\-Datei Ihres Newssystems; normalerweise -befindet sich die Datei in \fInewslibdir\fP und heißt \fInewsgroups\fP, so dass -Sie diese Einstellung nur ändern müssen wenn sich Ihre Konfiguration -unterscheidet. -.TP -\fBsubscriptionsfile\fP -Vollständiger Pfadname der Abonnements\-Datei Ihres Newssystems; -normalerweise befindet sich die Datei in \fInewslibdir\fP und heißt -\fIsubscriptions\fP, so dass Sie diese Einstellung nur ändern müssen wenn sich -Ihre Konfiguration unterscheidet. -.RE -.PP - -\fI/usr/local/share/locale/$LC_MESSAGES/LC_MESSAGES/tin.mo\fP -.sp -.RS -Übersetzung in die in $\fBLC_ALL\fP, $\fBLC_MESSAGES\fP oder $\fBLANG\fP angegebene -Sprache -.RE -.PP - -.\" tin uses inns old (pre 2.x) Path convention. -.\" as with inn >= 2.2.x getting more and more popular -.\" we should think about checking for the new Paths -.\" (described shown below). -\fI${TIN_LIBDIR:\-NEWSLIBDIR}"/"${TIN_ACTIVEFILE:\-active}\fP -.sp -.RS -Diese Datei enthält eine Liste der Newsgruppen, die der lokale Server -vorhält. Jede Newsgruppe sollte nur einmal aufgeführt werden. Jede Zeile -beschreibt eine Gruppe; in jeder Newsgruppe haben die Artikel eindeutige -Namen: monoton steigende Nummern. -.sp -.\" TODO: tin issues just a warning in that case. -Wenn ein Artikel in Newsgruppen gepostet wird die nicht in dieser Datei -erwähnt sind, werden diese Newsgruppen ignoriert. Wenn keine gültigen -Newsgruppen angegeben werden, wird der Artikel zurückgewiesen. -.sp -Jede Zeile besteht aus vier durch Leerzeichen getrennte Felder "\fIName\fP -\fIhighmark\fP \fIlowmark\fP \fIMarker\fP". -.TP -\fBName\fP -ist der Name der Newsgruppe -.TP -\fBhighmark\fP -die höchste Artikelnummer die je in der Gruppe benutzt wurde -.TP -\fBlowmark\fP -ist die niedrigste Artikelnummer in der Gruppe; es ist nicht gewährleistet, -dass diese Zahl genau ist und sie sollte nur als Hinweis angesehen -werden. Beachten Sie, dass es aufgrund von Artikel Stornierungen, zu Lücken -in der Nummerierung Sequenz kommen kann. Falls die niedrigste Artikelnummer -größer als die höchste Artikelnummer ist, dann gibt es keine Artikel in der -Newsgroup. -.TP -\fBMarker\fP -kann eines der folgenden sein -.RS -.TP -\fBy\fP -lokale Postings sind erlaubt -.TP -\fBn\fP -lokale Postings sind nicht erlaubt, Artikel kommen nur über andere Server -.TP -\fBm\fP -die Gruppe ist moderiert und alle Postings müssen approved werden -.TP -\fBj\fP -Artikel in dieser Gruppe werden nicht gespeichert sondern nur durchgereicht -.TP -\fBx\fP -in diese Gruppe darf nicht gepostet werden -.TP -\fB=foo.bar\fP -Artikel werden auf dem Server in der Gruppe \*(rqfoo.bar\*(rq abgelegt -.RE -.TP -\fB\%tin\fP(1) -versucht die Datei nur zu lesen, falls Sie aus dem lokalen Spool lesen. Wenn -News per NNTP gelesen wird verwendet \fB\%tin\fP(1) stattdessen die Befehle -LIST (\fBRFC\%3977\fP) oder LIST COUNTS (\fBRFC\%6048\fP). -.RE -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/active.times\fP -.sp -.RS -Diese Datei enthält eine chronologische Aufzeichnung, wann Newsgroups -erstellt wurden. Sie wird normalerweise vom lokalen Newsserver aktualisiert -(z. B. \fB\%innd\fP(8)) wenn eine neue Gruppe erstellt wird. Jede Zeile besteht -aus drei durch Leerzeichen getrennten Feldern "\fIName\fP \fIZeit\fP -\fIErsteller\fP". -.TP -\fBName\fP -ist der Name der Newsgruppe -.TP -\fBtime\fP -Zeit wann die Gruppe erzeugt wurde, ausgedrückt als Anzahl von Sekunden seit -Beginn der Epoche. -.TP -\fBErsteller\fP -die Mailadresse der Person die die Gruppe angelegt hat. -.TP -\fB\%tin\fP(1) -versucht die Datei nur zu lesen, falls Sie aus dem lokalen Spool lesen. Wenn -News per NNTP gelesen wird verwendet \fB\%tin\fP(1) stattdessen den NEWGROUPS -(\fBRFC\%3977\fP) Befehl. -.RE -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/newsgroups\fP -.sp -.RS -Diese Datei enthält kurze Beschreibungen der einzelnen Newsgruppen. Es wird -normalerweise durch die lokalen Newsserver aktualisiert (zB. \fB\%innd\fP(8)) -sobald eine neue Gruppe wird erstellt. Jede Zeile besteht aus zwei durch -Tabulator getrennten Feldern "\fIGruppen.Name\fP \fIKurzbeschreibung\fP". -.TP -\fBGruppen.Name\fP -ist der Name der Newsgruppe -.TP -\fBKurzbeschreibung\fP -ist die zugehörige Kurzbeschreibung -.TP -\fB\%tin\fP(1) -versucht die Datei nur zu lesen, falls Sie aus dem lokalen Spool lesen. Wenn -News per NNTP gelesen wird verwendet \fB\%tin\fP(1) stattdessen den LIST -NEWSGROUPS (\fBRFC\%3977\fP) Befehl. -.RE -.PP - -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/organization\fP -.sp -.RS -In diese Datei kann eine Standardorganisation angegeben werden, die in der -\&\*(rqOrganisation:\*(rq\-Kopfzeile verwendet wird. $\fBORGANIZATION\fP hat eine höhere -Priorität falls gesetzt. -.RE -.PP - -.\" is the Path correct? or is it /news/etc/overview.fmt -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/overview.fmt\fP -.sp -.RS -Diese Datei gibt die Struktur der Nachrichtenübersichtsdatenbank an (siehe -auch \fB\%newsoverview\fP(5)). Die Reihenfolge der Zeilen in dieser Datei ist -wichtig; sie bestimmt die Reihenfolge, in der die Felder in der Datenbank -stehen. Siehe auch \fB\%overview.fmt\fP(5). \fB\%tin\fP(1) versucht die Datei nur -dann zu lesen. Falls Sie direkt vom lokalen Spool lesen, wenn Sie -Nachrichten mittels NNTP lesen, verwendet \fB\%tin\fP(1) stattdessen den Befehl -LIST OVERVIEW.FMT (\fBRFC\%3977\fP). -.RE -.PP - -.\" is the Path correct? or is it /news/etc/subscriptions -\fI${TIN_LIBDIR:\-NEWSLIBDIR}/subscriptions\fP -.sp -.RS -Diese Datei enthält eine Liste von Newsgroups \(em eine pro Zeile \(em die -der Client abonnieren sollte, wenn der Benutzer keine -${TIN_HOMEDIR:\-"$HOME"}/.newsrc für den Newsserver hat. \fB\%tin\fP(1) versucht -die Datei nur dann zu lesen, wenn Sie direkt aus dem lokalen Spool -lesen. Falls Sie Nachrichten mittels NNTP lesen, verwendet \fB\%tin\fP(1) -stattdessen den Befehl LIST SUBSCRIPTIONS (\fBRFC\%6048\fP). -.RE - -.SH "SIEHE AUCH" -\fB\%inews\fP(1), \fB\%ispell\fP(1), \fB\%lp\fP(1), \fB\%lpr\fP(1), \fB\%metamail\fP(1), -\fB\%mutt\fP(1), \fB\%perl\fP(1), \fB\%perlre\fP(1), \fB\%pgp\fP(1), \fB\%rn\fP(1), -\fB\%shar\fP(1), \fB\%slrnface\fP(1), \fB\%tin\fP(1), \fB\%xterm\fP(1x), -\fB\%heapsort\fP(3), \fB\%iconv\fP(3), \fB\%iconv_open\fP(3), \fB\%nl_langinfo\fP(3), -\fB\%pcre\fP(3), \fB\%pcre2\fP(3), \fB\%pcrepattern\fP(3), \fB\%pcre2pattern\fP(3), -\fB\%qsort\fP(3), \fB\%strftime\fP(3), \fB\%system\fP(3), \fB\%active\fP(5), -\fB\%mailcap\fP(5), \fB\%mbox\fP(5), \fB\%mmdf\fP(5), \fB\%newsoverview\fP(5), -\fB\%overview.fmt\fP(5), \fB\%innd\fP(8), \fBRFC\%1524\fP, \fBRFC\%1952\fP, -\fBRFC\%2045\fP, \fBRFC\%2046\fP, \fBRFC\%2047\fP, \fBRFC\%2231\fP, \fBRFC\%2980\fP, -\fBRFC\%3977\fP, \fBRFC\%4155\fP, \fBRFC\%4643\fP, \fBRFC\%5198\fP, \fBRFC\%5322\fP, -\fBRFC\%5536\fP, \fBRFC\%5537\fP, \fBRFC\%6048\fP, \fBRFC\%6838\fP, \fBRFC\%8143\fP diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/l10n/de.add tin-2.6.5/doc/l10n/de.add --- tin-2.6.4/doc/l10n/de.add 2023-11-07 08:09:44.000000000 +0100 +++ tin-2.6.5/doc/l10n/de.add 1970-01-01 01:00:00.000000000 +0100 @@ -1,6 +0,0 @@ -PO4A-HEADER: mode=after; position=MAINTAINER;beginboundary=^\.SH -.SH ÜBERSETZUNG -.IP "Erika Mustermann " -Wenn Sie Fehler in der Übersetzung finden, schicken Sie bitte eine E-Mail -an . -.\" diff -Nurp '--exclude=.bzr*' tin-2.6.4/doc/l10n/de.po tin-2.6.5/doc/l10n/de.po --- tin-2.6.4/doc/l10n/de.po 2024-12-23 10:57:23.000000000 +0100 +++ tin-2.6.5/doc/l10n/de.po 1970-01-01 01:00:00.000000000 +0100 @@ -1,15164 +0,0 @@ -# German translations for the tin man pages. -# This file is distributed under the same license as the tin package. -# Urs Janssen , 2008-2025. -# -msgid "" -msgstr "" -"Project-Id-Version: tin-man 2.6.4\n" -"Report-Msgid-Bugs-To: translation@tin.org\n" -"POT-Creation-Date: 2024-12-23 10:54+0100\n" -"PO-Revision-Date: 2024-12-23 10:57+0100\n" -"Last-Translator: Urs Janssen \n" -"Language-Team: German \n" -"Language: de\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Bugs: Report translation errors to the Language-Team address.\n" - -#. type: TH -#: doc/tin.1:11 doc/tin.5:9 -#, no-wrap -msgid "tin" -msgstr "tin" - -#. type: TH -#: doc/tin.1:11 doc/tin.5:9 -#, no-wrap -msgid "December 24th, 2024" -msgstr "24 Dezember 2024" - -#. type: TH -#: doc/tin.1:11 doc/tin.5:9 -#, no-wrap -msgid "2.6.4" -msgstr "2.6.4" - -#. type: TH -#: doc/tin.1:11 doc/tin.5:9 -#, no-wrap -msgid "Usenet newsreader" -msgstr "Usenet Newsreader" - -#. type: SH -#: doc/tin.1:14 doc/tin.5:11 -#, no-wrap -msgid "NAME" -msgstr "NAME" - -#. type: Plain text -#: doc/tin.1:18 -msgid "tin, rtin - Usenet newsreader" -msgstr "tin, rtin - Usenet Newsreader" - -#. type: SH -#: doc/tin.1:18 -#, no-wrap -msgid "SYNOPSIS" -msgstr "ÜBERSICHT" - -#. type: Plain text -#: doc/tin.1:53 -msgid "" -"B [\\|[\\|B<-h>\\||\\|B<-H>\\||\\|B<-V>\\|]\\ \\|| [\\|[\\|B<-a>\\|] " -"[\\|B<-dlnq>\\||\\|B<-Q>\\|] [\\|B<-ACkrTzxX>\\|]\\|] [\\|[\\|B<-R>\\||\\|B<-" -"S>\\|] \\|\\|B<-s> I\\|] [\\|B<-cuvZ>\\|] [\\|B<-4>\\||\\|" -"B<-6>\\|] [\\|B<-o>\\||\\|B<-w>\\||\\|B<-N>\\||\\|B<-M> I
\\|] [\\|" -"B<-D> I\\|] [\\|B<-F> I\\|] [\\|B<-G> " -"I\\|] [\\|B<-f> I\\|] [\\|B<-g> I\\|[\\|:" -"I\\|]\\|] [\\|B<-L> I\\|] [\\|B<-m> I\\|] [\\|B<-" -"p> I\\|] [\\|B<-t> I\\|] [\\|B<-I> I\\|]\\ \\|" -"[I\\|[\\|,.\\|.\\|.\\|]\\|]\\|]" -msgstr "" -"B [\\|[\\|B<-h>\\||\\|B<-H>\\||\\|B<-V>\\|]\\ \\|| [\\|[\\|B<-a>\\|] " -"[\\|B<-dlnq>\\||\\|B<-Q>\\|] [\\|B<-ACkrTzxX>\\|]\\|] [\\|[\\|B<-R>\\||\\|B<-" -"S>\\|] \\|\\|B<-s> I\\|] [\\|B<-cuvZ>\\|] [\\|B<-4>\\||\\|" -"B<-6>\\|] [\\|B<-o>\\||\\|B<-w>\\||\\|B<-N>\\||\\|B<-M> I\\|] [\\|" -"B<-D> I\\|] [\\|B<-F> I\\|] [\\|B<-G> " -"I\\|] [\\|B<-f> I\\|] [\\|B<-g> I\\|[\\|:" -"I\\|]\\|] [\\|B<-L> I\\|] [\\|B<-m> I\\|] [\\|" -"B<-p> I\\|] [\\|B<-t> I\\|] [\\|B<-I> I\\|]\\ \\|" -"[I\\|[\\|,.\\|.\\|.\\|]\\|]\\|]" - -#. type: SH -#: doc/tin.1:53 doc/tin.5:14 -#, no-wrap -msgid "DESCRIPTION" -msgstr "BESCHREIBUNG" - -#. type: Plain text -#: doc/tin.1:62 -msgid "" -"B is a full-screen easy to use Usenet newsreader. It can read news " -"locally (e.g., I) or remotely (B or B option) " -"via an NNTP (Network News Transport Protocol, B) or NNTPS " -"(B) server. It will automatically utilize NOV B<\\" -"%newsoverview>(5) style index files if available locally or via the NNTP " -"[X]OVER command (B, B)." -msgstr "" -"B ist ein einfach zu bedienender Newsreader für das Usenet. Er kann " -"Artikel von einem lokalen (z. B. aus I) oder entfernten " -"Server (B oder B Option) mittels NNTP (Network News Transport " -"Protocol, B) oder NNTPS (B) lesen. Er benutzt, " -"sofern vorhanden, lokale NOV B<\\%newsoverview>(5) Indexdateien bzw. den " -"[X]OVER NNTP-Befehl (B, B)." - -#. type: Plain text -#: doc/tin.1:68 -msgid "" -"B has four separate levels of operation: Selection level, Group level, " -"Thread level and Article level. Use the B ('B') command to view a " -"list of the commands available at a particular level." -msgstr "" -"B hat vier unterschiedliche Arbeitsebenen: Auswahlebene, Gruppenebene, " -"Threadebene und Artikelebene. Mit dem B ('B') Befehl können die " -"jeweils verfügbaren Befehle angezeigt werden." - -#. type: Plain text -#: doc/tin.1:76 -msgid "" -"On startup B will show a list of the newsgroups found in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>. An arrow '\\(-E' or highlighted " -"bar will point to the first newsgroup. Move to a group by using the terminal " -"arrow keys (terminal dependent) or B ('B') and B ('B'). Use " -"PgUp/PgDn (terminal dependent) or B ('B<^U>') (CTRL-U) and " -"B ('B<^D>') (CTRL-D) to page up/down. Enter a newsgroup by " -"pressing 'BCRE>'." -msgstr "" -"Zu Beginn zeigt B eine Liste der Gruppen in I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc>. Ein Pfeil '\\(-E' oder ein inverser Balken zeigt " -"auf die erste Newsgruppe. Um zu einer Gruppe zu navigieren können die Cursor-" -"Tasten (hängt vom verwendetem Terminal ab) oder B ('B') und B " -"('B') benutzt werden. Mit Bildrauf/Bildrunter (hängt vom verwendetem " -"Terminal ab) oder B ('B<^U>') (CTRL-U) und B ('B<^D>') " -"(CTRL-D) kann Seitenweise navigiert werden. Die ausgewählte Gruppe wird " -"durch Drücken von 'BCRE>' betreten." - -#. type: Plain text -#: doc/tin.1:81 -msgid "" -"The B ('BTABE>') key enters the next " -"newsgroup with unread articles." -msgstr "" -"Durch Drücken der B ('BTABE>') Taste wird " -"die nächste Newsgruppe mit ungelesenen Artikeln betreten." - -#. type: SH -#: doc/tin.1:81 -#, no-wrap -msgid "EXIT STATUS" -msgstr "RÜCKGABEWERT" - -#. type: TP -#: doc/tin.1:83 doc/tin.1:1173 doc/tin.1:3799 -#, no-wrap -msgid "B<0>" -msgstr "B<0>" - -#. type: Plain text -#: doc/tin.1:86 -msgid "Successful program execution. No unread news available in batch mode." -msgstr "" -"Programm erfolgreich beendet. Im Batch-Modus: keine ungelesenen Nachrichten " -"vorhanden." - -#. type: TP -#: doc/tin.1:86 doc/tin.1:3802 -#, no-wrap -msgid "B<1>" -msgstr "B<1>" - -#. type: Plain text -#: doc/tin.1:89 -msgid "Usage, syntax, configuration file or network error." -msgstr "Bedien-, Syntax-, Konfigurations- oder Netzwerk-Fehler." - -#. type: TP -#: doc/tin.1:89 doc/tin.1:3805 -#, no-wrap -msgid "B<2>" -msgstr "B<2>" - -#. type: Plain text -#: doc/tin.1:92 -msgid "Unread news available (batch mode (''B<-Z>'') only)." -msgstr "Ungelesene Nachrichten vorhanden (nur im Batch-Modus (''B<-Z>''))." - -#. type: TP -#: doc/tin.1:92 doc/tin.1:3808 -#, no-wrap -msgid "B<3>" -msgstr "B<3>" - -#. type: Plain text -#: doc/tin.1:97 -msgid "NNTP error." -msgstr "NNTP Fehler." - -#. type: SH -#: doc/tin.1:97 -#, no-wrap -msgid "OPTIONS" -msgstr "OPTIONEN" - -#. type: TP -#: doc/tin.1:98 -#, no-wrap -msgid "B<-4>" -msgstr "B<-4>" - -#. type: Plain text -#: doc/tin.1:102 -msgid "" -"Force connecting via IPv4 to the remote NNTP server. Only available when " -"built with IPv6 support." -msgstr "" -"Verbindung via IPv4 zum NNTP Server erzwingen. Nur verfügbar, wenn B " -"mit IPv6-Unterstützung gebaut wurde." - -#. type: TP -#: doc/tin.1:102 -#, no-wrap -msgid "B<-6>" -msgstr "B<-6>" - -#. type: Plain text -#: doc/tin.1:106 -msgid "" -"Force connecting via IPv6 to the remote NNTP server. Only available when " -"built with IPv6 support." -msgstr "" -"Verbindung via IPv6 zum NNTP Server erzwingen. Nur verfügbar, wenn B " -"mit IPv6-Unterstützung gebaut wurde." - -#. type: TP -#: doc/tin.1:106 -#, no-wrap -msgid "B<-a>" -msgstr "B<-a>" - -#. type: Plain text -#: doc/tin.1:109 -msgid "Toggle ANSI color (default is off)." -msgstr "ANSI-Farben ein/-ausschalten (Voreinstellung ist aus)." - -#. type: TP -#: doc/tin.1:109 -#, no-wrap -msgid "B<-A>" -msgstr "B<-A>" - -#. type: Plain text -#: doc/tin.1:112 -msgid "" -"Force authentication on initial connect. Only available when reading via " -"NNTP." -msgstr "" -"Erzwinge Authentifikation beim Verbindungsaufbau. Nur verfügbar, wenn via " -"NNTP gelesen wird." - -#. type: TP -#: doc/tin.1:112 -#, no-wrap -msgid "B<-c>" -msgstr "B<-c>" - -#. type: Plain text -#: doc/tin.1:117 -msgid "" -"Create/update index files for every group in I<${TIN_HOMEDIR:-\"$HOME\"}/." -"newsrc> or file specified by the ''B<-f>'' option and mark all articles as " -"read." -msgstr "" -"Erstelle bzw. aktualisiere Index-Dateien für alle Gruppen in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> bzw. der mittels ''B<-f>'' angegebenen " -"Datei und markiere alle Artikel als gelesen." - -#. type: TP -#: doc/tin.1:117 -#, no-wrap -msgid "B<-C>" -msgstr "B<-C>" - -#. type: Plain text -#: doc/tin.1:122 -msgid "" -"Use COMPRESS NNTP extension (B) if available. See also " -"B, 'B<-t>'' and the \"SECURITY\" and \"BUGS\" " -"section." -msgstr "" -"Die NNTP-Erweiterung COMPRESS (B) verwenden, falls verfügbar. " -"Auch B, 'B<-t>'' und die Abschnitte \"SICHERHEIT\" " -"und \"FEHLER\" beachten." - -#. type: TP -#: doc/tin.1:122 -#, no-wrap -msgid "B<-d>" -msgstr "B<-d>" - -#. FIXME: explain debug levels -#. type: Plain text -#: doc/tin.1:128 -msgid "" -"Don't load newsgroup descriptions and servers message of the day " -"(interactive mode)." -msgstr "" -"Keine Gruppenbeschreibungen und die Server Meldung des Tages laden " -"(Interaktiver-Modus)." - -#. type: TP -#: doc/tin.1:128 -#, no-wrap -msgid "B<-D>I< debug-level>" -msgstr "B<-D>I< Debuggrad>" - -#. type: Plain text -#: doc/tin.1:136 -msgid "" -"Enter debug-level, the levels can specified via number (should be avoided as " -"it will be removed in the future) or name (case insensitive) as listed " -"below. Use comma to give multiple levels, any combinations are allowed (e." -"g., ''B<-D> I''). If removal is requested it will be performed " -"at startup and on normal termination (that is the files are only available " -"while tin is running)." -msgstr "" - -#. type: ta -#: doc/tin.1:138 -#, no-wrap -msgid "\\w'%128 'u +\\w'ATTRIBUTES 'u +\\w'ATTRIBUTES 'u +\\w'ATTRIBUTES'u" -msgstr "\\w'%128 'u +\\w'ATTRIBUTES 'u +\\w'ATTRIBUTES 'u +\\w'ATTRIBUTES'u" - -#. type: Plain text -#: doc/tin.1:148 -#, no-wrap -msgid "" -" I<1\tNNTP\tNNTPS>\n" -" I<2\tFILTER\tARTS>\n" -" I<4\tNEWSRC\tBITMAP>\n" -" I<8\tTHREADING\tREFS>\n" -" I<16\tMEMORY\tMALLOC>\n" -" I<32\tATTRIBUTES>\n" -" I<64\tMISC\tGNKSA\tACTIVE>\n" -"I<127\tALL\tEVERYTHING>\n" -"I<128\tREMOVE\tDELETE>\n" -msgstr "" -" I<1\tNNTP\tNNTPS>\n" -" I<2\tFILTER\tARTS>\n" -" I<4\tNEWSRC\tBITMAP>\n" -" I<8\tTHREADING\tREFS>\n" -" I<16\tMEMORY\tMALLOC>\n" -" I<32\tATTRIBUTES>\n" -" I<64\tMISC\tGNKSA\tACTIVE>\n" -"I<127\tALL\tEVERYTHING>\n" -"I<128\tREMOVE\tDELETE>\n" - -#. type: Plain text -#: doc/tin.1:153 -msgid "" -"For NNTP-level ''B<-v>'' controls the verbosity of the output. Depending on " -"the debug-level various files may be written to I<$TMPDIR> and/or on screen " -"output may be given. See also the \"SECURITY\" section!" -msgstr "" -"Im NNTP-Level steuert ''B<-v>'' die Ausführlichkeit der Ausgabe. Je nach " -"Debuggrad könnten verschiedene Dateien nach I<$TMPDIR> geschrieben werden " -"und/oder eine Bildschirmausgabe erfolgen. Auch den Abschnitt \"SICHERHEIT\" " -"beachten!" - -#. type: TP -#: doc/tin.1:153 -#, no-wrap -msgid "B<-f>I< file>" -msgstr "B<-f>I< Datei>" - -#. type: Plain text -#: doc/tin.1:158 -msgid "" -"Use the specified file of subscribed to newsgroups in place of " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> or a file specified via " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>." -msgstr "" -"Benutze die angegebene newsrc-Datei anstelle von I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc> oder der Datei aus I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"newsrctable>." - -#. type: TP -#: doc/tin.1:158 -#, no-wrap -msgid "B<-F>I< file>" -msgstr "B<-F>I< Datei>" - -# -# -#. type: Plain text -#: doc/tin.1:161 -msgid "" -"Use the specified filter file instead of I<${TIN_HOMEDIR:-\"$HOME\"}/." -"filter>." -msgstr "" -"Angegebene Filter-Datei anstelle von I<${TIN_HOMEDIR:-\"$HOME\"}/.filter> " -"verwenden." - -#. type: TP -#: doc/tin.1:161 -#, no-wrap -msgid "B<-g>I< server>[B<:>I]" -msgstr "B<-g>I< Server>[B<:>I]" - -#. type: Plain text -#: doc/tin.1:167 -msgid "" -"Use the server[:port] and newsrc specified in I<${TIN_HOMEDIR:-\"$HOME\"}/." -"tin/newsrctable>. Only available when reading via NNTP. If you want to give " -"a port with a plain IPv6 address, the address must be enclosed in square " -"brackets." -msgstr "" -"Zugehörigen Newsserver[:Port] und newsrc-Datei aus I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.tin/newsrctable> benutzen. Nur verfügbar, wenn via NNTP gelesen " -"wird.Wenn Sie einen Port mit einer direkten IPv6-Adresse angeben möchten, " -"muss die Adresse in eckige Klammern gesetzt werden." - -#. type: TP -#: doc/tin.1:167 -#, no-wrap -msgid "B<-G>I< article-limit>" -msgstr "B<-G>I< Artikellimit>" - -#. type: Plain text -#: doc/tin.1:175 -msgid "" -"Limit the number of articles/group to retrieve from the server. If " -"I is E 0 not more than the last I articles/" -"group are fetched from the server. If I is E 0 B " -"will start fetching articles from your first unread minus absolute value of " -"I. Default is 0, which means no limit." -msgstr "" -"Beschränkt die Anzahl der Artikel pro Gruppe, die vom Server abgerufen " -"werden sollen. Wenn I E 0 ist, werden nicht mehr als die " -"letzten I Artikel pro Gruppe vom Server geholt. Wenn " -"I E 0 ist, beginnt B mit dem Abruf von Artikeln ab " -"Ihrem ersten ungelesenen Artikel minus dem absoluten Wert von I. Die Voreinstellung ist 0, was keine Begrenzung bedeutet." - -#. type: TP -#: doc/tin.1:175 -#, no-wrap -msgid "B<-h>" -msgstr "B<-h>" - -#. type: Plain text -#: doc/tin.1:178 -msgid "Help listing all command-line options." -msgstr "Kurzübersicht der verfügbaren Kommandozeilenoptionen." - -#. type: TP -#: doc/tin.1:178 -#, no-wrap -msgid "B<-H>" -msgstr "B<-H>" - -#. type: Plain text -#: doc/tin.1:182 -msgid "" -"Brief introduction to B that is also shown the first time it is started." -msgstr "" -"Kurzeinführung in B welche auch beim allerersten Start ausgegeben wird." - -#. type: TP -#: doc/tin.1:182 -#, no-wrap -msgid "B<-I>I< dir>" -msgstr "B<-I>I< Verzeichnis>" - -#. type: Plain text -#: doc/tin.1:188 -msgid "" -"Directory in which to store newsgroup index files. Default is " -"I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news>. This " -"option has no effect if B retrieves its index files via NNTP and " -"B is turned off." -msgstr "" -"Verzeichnis in dem die Newsgroup-Indexdateien gespeichert werden. Standard " -"ist I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news>. Diese " -"Option hat keine Auswirkung, falls B seine Indexdateien über NNTP " -"abruft und B ausgeschaltet ist." - -#. type: TP -#: doc/tin.1:188 -#, no-wrap -msgid "B<-k>" -msgstr "B<-k>" - -#. type: Plain text -#: doc/tin.1:193 -msgid "" -"Skip the certificate verification step for NNTPS connections and proceed " -"without checking. This option implies ''B<-T>''. See also the \"SECURITY\" " -"section." -msgstr "" -"Zertifikatsüberprüfungsschritt für NNTPS-Verbindungen überspringen und ohne " -"Überprüfung fort fahren. Diese Option beinhaltet ''B<-T>''. Auch den " -"Abschnitt \"SICHERHEIT\" beachten." - -#. type: TP -#: doc/tin.1:193 -#, no-wrap -msgid "B<-l>" -msgstr "B<-l>" - -#. type: Plain text -#: doc/tin.1:205 -msgid "" -"Get number of articles per group from the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/" -"\"${TIN_ACTIVEFILE:-active}> file. If reading via NNTP this is done with the " -"LIST command (B). This might result in incorrect article counts " -"but is usually faster than the default which is to read the I<${TIN_LIBDIR:-" -"NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file (either directly or via " -"LIST) and then check the article count via NNTP GROUP command (B) ''B<-ln>''. If reading via NNTP and LIST COUNTS (B) is " -"available that is used instead as it gives more accurate article counts." -msgstr "" -"Ruft die Anzahl der Artikel pro Gruppe aus der Datei I<${TIN_LIBDIR:-" -"NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> ab. Beim Lesen über NNTP erfolgt " -"dies mit dem LIST Befehl (B). Dies kann zu falschen " -"Artikelzahlen führen, ist aber normalerweise schneller als der Standard, der " -"darin besteht, die Datei I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-" -"active}> (entweder direkt oder über LIST) zu Lesen und dann die " -"Artikelanzahl über den Befehl NNTP GROUP ((B) ''B<-ln>'' zu " -"überprüfen. Wenn das Lesen über NNTP und LIST COUNTS (B) " -"verfügbar ist, wird dies stattdessen verwendet, da es genauere Artikelzahlen " -"liefert." - -#. type: TP -#: doc/tin.1:205 -#, no-wrap -msgid "B<-L>" -msgstr "B<-L>" - -#. type: Plain text -#: doc/tin.1:209 -msgid "" -"Show the message with the given Message-ID if available. Only available when " -"reading via NNTP." -msgstr "" -"Zeigt die Nachricht mit der angegebenen Message-ID an, falls diese verfügbar " -"ist. Nur verfügbar, wenn via NNTP gelesen wird." - -#. type: TP -#: doc/tin.1:209 -#, no-wrap -msgid "B<-m>I< dir>" -msgstr "B<-m>I< Verzeichnis>" - -#. type: Plain text -#: doc/tin.1:212 -msgid "Mailbox directory to use. Default is I<${TIN_HOMEDIR:-\"$HOME\"}/Mail>." -msgstr "" -"Zu benutzendes Mailbox-Verzeichnis. Voreinstellung ist I<${TIN_HOMEDIR:-" -"\"$HOME\"}/Mail>." - -#. type: TP -#: doc/tin.1:212 -#, no-wrap -msgid "B<-M>I< user>" -msgstr "B<-M>I< Benutzer>" - -#. type: Plain text -#: doc/tin.1:216 -msgid "" -"Mail unread articles to specified user for later reading. For more " -"information read section \"AUTOMATIC MAILING AND SAVING NEW NEWS\"." -msgstr "" -"Sende ungelesene Artikel an den angegebenen Benutzer um sie später lesen zu " -"können. Für weitere Informationen siehe den Abschnitt \"AUTOMATISCHES MAILEN " -"UND SPEICHERN VON UNGELESENEN ARTIKELN\"." - -#. type: TP -#: doc/tin.1:216 -#, no-wrap -msgid "B<-n>" -msgstr "B<-n>" - -#. type: Plain text -#: doc/tin.1:223 -msgid "" -"Only load groups from the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-" -"active}> file that are subscribed to in the user's I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc>. This allows a noticeable speedup when connecting via a " -"slow line, but B may not be able detect which groups are moderated. See " -"also ''B<-l>''." -msgstr "" -"Nur die Gruppen aus der Datei I<${TIN_LIBDIR:-NEWSLIBDIR}\"/" -"\"${TIN_ACTIVEFILE:-active}> laden, die im I<${TIN_HOMEDIR:-\"$HOME\"}/." -"newsrc> des Benutzers abonniert sind. Dies ermöglicht eine spürbare " -"Beschleunigung beim verbinden über eine langsame Leitung, kann aber " -"möglicherweise nicht erkennen, welche Gruppen moderiert werden. Siehe auch " -"''B<-l>''." - -#. type: TP -#: doc/tin.1:223 -#, no-wrap -msgid "B<-N>" -msgstr "B<-N>" - -#. type: Plain text -#: doc/tin.1:227 -msgid "" -"Mail unread articles to yourself for later reading. For more information " -"read section \"AUTOMATIC MAILING AND SAVING NEW NEWS\"." -msgstr "" -"Sende ungelesene Artikel an dich selbst um sie später lesen zu können. Für " -"weitere Informationen siehe den Abschnitt \"AUTOMATISCHES MAILEN UND " -"SPEICHERN VON UNGELESENEN ARTIKELN\"." - -#. type: TP -#: doc/tin.1:227 -#, no-wrap -msgid "B<-o>" -msgstr "B<-o>" - -#. type: Plain text -#: doc/tin.1:231 -msgid "" -"Quick post all postponed articles and exit. In order for this to be really " -"quick, it should be used with ''B<-n>'' if possible." -msgstr "" -"Schnell-Modus um alle zurückgestellten Artikel zu posten und danach B " -"wieder beenden. Nach Möglichkeit mit ''B<-n>'' kombinieren." - -#. type: TP -#: doc/tin.1:231 -#, no-wrap -msgid "B<-p>I< port>" -msgstr "B<-p>I< Port>" - -#. type: Plain text -#: doc/tin.1:236 -msgid "" -"Port to use if reading via NNTP (default is 119 or 563 if NNTPS is enabled, " -"see ''B<-T>''). This also overrides the environment variables $B " -"and $B if set. Only available when reading via NNTP." -msgstr "" -"Zu benutzende Portnummer falls per NNTP gelesen wird (Voreinstellung ist 119 " -"oder 563 falls NNTPS benutzt wird, siehe ''B<-T>''). Übersteuert die " -"Umgebungsvariablen $B und $B. Nur verfügbar, wenn via " -"NNTP bzw. NNTPS gelesen wird." - -#. type: TP -#: doc/tin.1:236 -#, no-wrap -msgid "B<-q>" -msgstr "B<-q>" - -#. type: Plain text -#: doc/tin.1:239 -msgid "" -"Don't check for new newsgroups and skip loading the servers message of the " -"day." -msgstr "" -"Nicht prüfen ob neue Newsgruppen vorhanden sind und die Server Meldung des " -"Tages nicht laden." - -#. type: TP -#: doc/tin.1:239 -#, no-wrap -msgid "B<-Q>" -msgstr "B<-Q>" - -#. type: Plain text -#: doc/tin.1:244 -msgid "" -"Quick start. Start B as quickly as possible. Currently this is " -"equivalent to ''B<-dnq>''. See also the ''B<-C>'' and ''B<-G>'' command-line " -"options." -msgstr "" -"Schnellstart. B so schnell wie möglich starten, zur Zeit entspricht " -"diese Option ''B<-dnq>''. Siehe auch die Kommandozeilenoptionen 'B<-C>'' und " -"''B<-G>''." - -#. type: TP -#: doc/tin.1:244 -#, no-wrap -msgid "B<-r>" -msgstr "B<-r>" - -#. type: Plain text -#: doc/tin.1:249 -msgid "" -"Read news remotely from the default NNTP server specified in the environment " -"variable $B or contained in the file I." -msgstr "" -"Nachrichten aus der Ferne vom Standard-NNTP-Server, der in der " -"Umgebungsvariable $B angegeben oder in der Datei I enthalten ist lesen." - -#. type: TP -#: doc/tin.1:249 -#, no-wrap -msgid "B<-R>" -msgstr "B<-R>" - -#. type: Plain text -#: doc/tin.1:252 -msgid "Read news saved by the ''B<-S>'' option." -msgstr "Lese mittels ''B<-S>'' gespeicherte Artikel." - -#. type: TP -#: doc/tin.1:252 -#, no-wrap -msgid "B<-s>I< dir>" -msgstr "B<-s>I< Verzeichnis>" - -#. type: Plain text -#: doc/tin.1:256 -msgid "" -"Save/read articles to/in directory. Default is I<${TIN_HOMEDIR:-\"$HOME\"}/" -"News>." -msgstr "" -"Artikel in/aus Verzeichnis speichern/lesen. Standard ist I<${TIN_HOMEDIR:-" -"\"$HOME\"}/News>." - -#. type: TP -#: doc/tin.1:256 -#, no-wrap -msgid "B<-S>" -msgstr "B<-S>" - -#. type: Plain text -#: doc/tin.1:260 -msgid "" -"Save unread articles for later reading by the ''B<-R>'' option. For more " -"information read section \"AUTOMATIC MAILING AND SAVING NEW NEWS\"." -msgstr "" -"Speichere ungelesene Artikel zum späteren Lesen mittels ''B<-R>''. Für " -"weitere Informationen siehe den Abschnitt \"AUTOMATISCHES MAILEN UND " -"SPEICHERN VON UNGELESENEN ARTIKELN\"." - -#. type: TP -#: doc/tin.1:260 -#, no-wrap -msgid "B<-t>I< timeout>" -msgstr "B<-t>I< Timeout>" - -#. type: Plain text -#: doc/tin.1:264 -msgid "" -"Override the B setting. Default is 120 seconds, " -"allowed maximum is 16383." -msgstr "" -"Übersteuert die B Einstellung. Voreinstellung sind " -"120, das Maximum 16383 Sekunden." - -#. type: TP -#: doc/tin.1:264 -#, no-wrap -msgid "B<-T>" -msgstr "B<-T>" - -#. type: Plain text -#: doc/tin.1:268 -msgid "" -"Enable NNTPS (NNTP over TLS). This also overrides the environment variable " -"$B if set. Only available when reading via NNTP." -msgstr "" -"NNTPS (NNTP über TLS) aktivieren. Dies setzt auch die Umgebungsvariable " -"$B außer Kraft, falls diese gesetzt ist. Nur verfügbar, wenn über " -"NNTP gelesen wird." - -#. type: TP -#: doc/tin.1:268 -#, no-wrap -msgid "B<-u>" -msgstr "B<-u>" - -#. type: Plain text -#: doc/tin.1:274 -msgid "" -"Create/update index files for every group in I<${TIN_HOMEDIR:-\"$HOME\"}/." -"newsrc> or file specified by the ''B<-f>'' option. This option is disabled " -"if B retrieves its index files via an NNTP server and " -"B is turned off." -msgstr "" -"Erstellt/aktualisiert Indexdateien für jede Gruppe in I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc> oder der Datei, die durch die Option ''B<-f>'' angegeben " -"ist. Diese Option ist deaktiviert, wenn B seine Indexdateien über einen " -"NNTP-Server abruft und B abgestellt ist." - -#. type: TP -#: doc/tin.1:274 -#, no-wrap -msgid "B<-v>" -msgstr "B<-v>" - -#. type: Plain text -#: doc/tin.1:279 -msgid "" -"Verbose mode for ''B<-c>'', ''B<-D>'', ''B<-M>'', ''B<-N>'', \\&''B<-S>'', " -"''B<-u>'', ''B<-V>'' and ''B<-Z>'' options. Can be used multiple times to " -"increase verbosity." -msgstr "" -"Ausführliche Ausgabe für ''B<-c>'', ''B<-D>'', ''B<-M>'', ''B<-N>'', \\&''B<-" -"S>'', ''B<-u>'', ''B<-V>'' und ''B<-Z>''-Optionen. Kann mehrfach verwendet " -"werden, um die Ausführlichkeit zu erhöhen." - -#. type: TP -#: doc/tin.1:279 -#, no-wrap -msgid "B<-V>" -msgstr "B<-V>" - -#. type: Plain text -#: doc/tin.1:282 -msgid "Print version information and compilation options." -msgstr "Versionsinformationen und Kompilieroptionen ausgeben." - -#. type: TP -#: doc/tin.1:282 -#, no-wrap -msgid "B<-w>" -msgstr "B<-w>" - -#. type: Plain text -#: doc/tin.1:287 -msgid "" -"Quick mode to post an article and then exit. This option implies \\&''B<-" -"d>''. In order for this to be really quick, it should be used with ''B<-n>'' " -"if possible." -msgstr "" -"Schnell-Modus um nur einen Artikel zu posten. Diese Option beinhaltet " -"\\&''B<-d>''. Nach Möglichkeit mit ''B<-n>'' kombinieren." - -#. type: TP -#: doc/tin.1:287 -#, no-wrap -msgid "B<-x>" -msgstr "B<-x>" - -#. type: Plain text -#: doc/tin.1:290 -msgid "No-posting mode. You cannot post articles if you use this option." -msgstr "" -"Sie können keine Artikel veröffentlichen, wenn Sie diese Option verwenden." - -#. type: TP -#: doc/tin.1:290 -#, no-wrap -msgid "B<-X>" -msgstr "B<-X>" - -#. type: Plain text -#: doc/tin.1:296 -msgid "" -"No overwrite mode. I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> and files in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin> will not be overwritten but may be created " -"if they don't exist. Should be used with ''B<-x>'' if possible." -msgstr "" -"Schreibgeschützter Modus. I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> und Dateien " -"unter I<${TIN_HOMEDIR:-\"$HOME\"}/.tin> werden nicht überschrieben aber " -"angelegt falls sie nicht existieren. Nach Möglichkeit mit ''B<-x>'' " -"kombinieren." - -#. type: TP -#: doc/tin.1:296 -#, no-wrap -msgid "B<-z>" -msgstr "B<-z>" - -#. type: Plain text -#: doc/tin.1:301 -msgid "" -"Only start B if there is any new/unread news. If there is news B " -"will position cursor at first group with unread news. Useful for putting in " -"login file." -msgstr "" -"B nur starten wenn es neue/ungelesene Artikel gibt. Falls das der Fall " -"ist wird der Cursor auf die erste Gruppe mit ungelesenen Artikeln " -"positioniert. Nützlich um B in login-Dateien aufzurufen." - -#. type: TP -#: doc/tin.1:301 -#, no-wrap -msgid "B<-Z>" -msgstr "B<-Z>" - -#. type: Plain text -#: doc/tin.1:307 -msgid "" -"Check if there is any new/unread news and exit with appropriate status. If " -"\\&''B<-v>'' option is specified the number of unread articles in each group " -"is printed. An exit code 0 indicates no news, 1 that an error occurred and 2 " -"that new/unread news exists. Useful for writing scripts." -msgstr "" -"Prüft ob es neue/ungelesene Artikel gibt und beendet sich mit dem " -"entsprechenden Rückgabewert. Falls mit der \\&''B<-v>'' Option kombiniert " -"wird die Zahl der ungelesenen Artikel in jeder Gruppe ausgegeben. Ein " -"Rückgabewert von 0 bedeutet keine ungelesene Artikel, 1 das ein Fehler " -"aufgetreten ist und 2 das ungelesene Artikel vorhanden sind. Nützlich in " -"Skripten." - -#. type: Plain text -#: doc/tin.1:313 -msgid "" -"B can also dynamically change its options by the B ('B') " -"command. Any changes are written to I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>. " -"For more information see section \"GLOBAL OPTIONS MENU AND TINRC " -"CONFIGURABLE VARIABLES\" and B<\\%tin>(5)." -msgstr "" -"B kann seine Optionen auch dynamisch mit dem Befehl B " -"('B') ändern. Alle Änderungen werden in I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"tinrc> geschrieben. Weitere Informationen finden Sie im Abschnitt \"MENÜ DER " -"GLOBALE OPTIONEN UND KONFIGURIERBAREN TINRC-VARIABLEN\" und B<\\%tin>(5)." - -#. type: Plain text -#: doc/tin.1:318 -msgid "" -"A list of groups can be specified after the other command-line options. This " -"can be useful if you wish to yank in or subscribe to a hand-picked subset of " -"the active newsgroups. See the section \"NEWSGROUP LISTS & WILDCARDS\" for " -"the types of pattern that B understands." -msgstr "" -"Eine Liste von Gruppen kann nach den anderen Kommandozeilenoptionen " -"angegeben werden. Dies kann nützlich sein, falls Sie eine handverlesene " -"Untermenge der aktiven Newsgruppen einblenden oder abonnieren möchten. Siehe " -"den Abschnitt \"NEWSGROUP LISTEN & WILDCARDS\" für die Arten von Muster, die " -"B versteht." - -#. type: Plain text -#: doc/tin.1:323 -msgid "" -"If you specify a single group-name, or a wildcard that matches a single " -"group, then you will automatically enter that group. Otherwise the normal " -"group selection screen will appear, but with all the matching groups present " -"too, as though you had yanked just those groups in." -msgstr "" -"Wenn Sie einen einzelnen Gruppennamen oder eine Wildcard, die nur auf eine " -"einzelne Gruppe passt angeben, dann wird automatisch in diese Gruppe " -"betreten. Andernfalls wird der normale Auswahlbildschirm angezeigt mit allen " -"passenden zusätzlichen Gruppen." - -#. type: Plain text -#: doc/tin.1:327 -msgid "" -"With the ''B<-w>'' flag a given group-name is used as default group to post " -"to. If more than one group or a wildcard is specified only the first group " -"respectively the first group that matches is used." -msgstr "" -"Mit dem ''B<-w>''-Schalter wird ein angegebener Gruppenname als Vorgabe " -"verwendet. Falls mehr als eine Gruppe oder ein Platzhalter angegeben wird, " -"wird nur die erste Gruppe bzw. die erste Gruppe verwendet, die übereinstimmt." - -#. type: Plain text -#: doc/tin.1:334 -msgid "" -"Once you use B ('B') to yank in all active groups, or " -"B ('B') to toggle the read/unread status, then " -"the command-line groups will be gone. You can use B " -"('B') to reread the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-" -"active}> file and get them back." -msgstr "" -"Sobald Sie B ('B') verwenden, um alle aktiven Gruppen " -"einzublenden, oder B ('B') verwenden, um den " -"Status gelesen/ungelesen umzuschalten, sind die Befehlszeilengruppen " -"verschwunden. Sie können B ('B') verwenden, um die " -"Datei I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> erneut zu " -"lesen um diese wieder anzuzeigen." - -#. type: Plain text -#: doc/tin.1:339 -msgid "" -"NB: With the ''B<-n>'' flag, only unsubscribed groups in the " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file (or the newsrc-file given by the " -"\\&''B<-f>'' command-line switch or via I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"newsrctable>) can be matched." -msgstr "" - -#. type: Plain text -#: doc/tin.1:349 -msgid "" -"Command-line options have higher priority than attributes and tinrc " -"options. Thus, command-line option takes precedence over configured values " -"with the single exception that if a port is given for the newsserver in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable> it will override any port " -"given on the command-line. The order of command-line options is not " -"important. If they are mutual exclusive the one with the highest priority " -"will be chosen and a warning may be given." -msgstr "" -"Die Befehlszeilenoptionen haben eine höhere Priorität als Attribute und " -"tinrc Optionen. Daher hat die Befehlszeilenoption Vorrang vor dem " -"konfigurierten Wert, mit der einzigen Ausnahme, dass, wenn ein Port für den " -"Newsserver in I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable> angegeben wird, " -"dieser den Port überschreibt, der in der Befehlszeile angegeben ist. Die " -"Reihenfolge der Befehlszeilenoptionen ist nicht wichtig. Wenn sie " -"gegenseitig ausschließend sind, wird die mit der höchsten Priorität " -"ausgewählt und eventuell eine Warnung ausgegeben." - -#. type: SH -#: doc/tin.1:349 -#, no-wrap -msgid "USAGE" -msgstr "GEBRAUCH" - -#. type: SS -#: doc/tin.1:352 -#, no-wrap -msgid "NEWS ADMINISTRATION" -msgstr "" - -#. type: Plain text -#: doc/tin.1:356 -msgid "" -"Maintaining Netnews on large networks of machines can be a pretty time " -"consuming job as I discovered when I was given the job of maintaining our " -"news system and news users." -msgstr "" -"Die Pflege von Netnews in großen Rechnernetzen kann sehr zeitaufwendig sein, " -"wie ich feststellen musste, als ich mit der Pflege unseres Newssystems und " -"der Benutzerbetreuung beauftragt wurde." - -#. type: Plain text -#: doc/tin.1:366 -msgid "" -"A user starting B for the first time can be automatically subscribed to " -"a list of newsgroups that are deemed appropriate by the news administrator. " -"The subscriptions file should be created in your news lib directory (i.e., " -"I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>) and should be world readable. If " -"you read news via NNTP, then your news server must support the LIST " -"SUBSCRIPTIONS command. It is part of the NNTP List Extensions (B) and all modern servers should understand it." -msgstr "" - -#. type: SS -#: doc/tin.1:366 -#, no-wrap -msgid "SCREEN FORMAT" -msgstr "ANSICHTEN" - -#. type: Plain text -#: doc/tin.1:369 -msgid "" -"B has four separate levels of operation: Selection level, Group level, " -"Thread level and Article level." -msgstr "" -"B hat vier unterschiedliche Arbeitsebenen: Auswahlebene, Gruppenebene, " -"Threadebene und Artikelebene." - -#. type: Plain text -#: doc/tin.1:376 -msgid "" -"At the Selection level the title displays (the name of the news server (with " -"a \"[T]\"- or \"[k]\"-suffix if reading via NNTPS (insecurely)) and) the " -"number of subscribed groups (containing new unread articles). The newsgroups " -"are displayed in the middle of the screen usually with the number of unread " -"articles displayed on the same line in front, but it can be customized via " -"B." -msgstr "" -"In der Auswahlebene zeigt der Titel (den Name des News-Servers (mit einem \"/" -"[T]\"- oder \"[k]\"-Suffix falls per NNTPS (unsicher) gelesen wird) und) die " -"Anzahl der abonnierten Gruppen (mit neuen ungelesenen Artikeln). Die " -"Newsgruppen werden in der Mitte des Bildschirms, in der Regel mit der Anzahl " -"der ungelesenen Artikel in der gleichen Zeile davor, abgebildet, aber das " -"kann mittels B angepasst werden." - -#. type: Plain text -#: doc/tin.1:384 -#, no-wrap -msgid "" -"\\f(CR\\(-EM 1 2 comp.security.announce Announcements from the CERT abou\n" -" M 2 1 news.admin.announce Announcements for news adminstra\n" -" 3 22 news.software.misc News-related software other than\n" -" 4 1475 news.software.nntp The Network News Transfer Protoc\n" -" X 5 124 news.software.readers Discussion of software used to r\\fR\n" -msgstr "" -"\\f(CR\\(-EM 1 2 comp.security.announce Announcements from the CERT abou\n" -" M 2 1 news.admin.announce Announcements for news adminstra\n" -" 3 22 news.software.misc News-related software other than\n" -" 4 1475 news.software.nntp The Network News Transfer Protoc\n" -" X 5 124 news.software.readers Discussion of software used to r\\fR\n" - -#. type: Plain text -#: doc/tin.1:387 -msgid "" -"There may also be a character prefixing the line. An explanation follows:" -msgstr "Eventuell steht am Anfang der Zeile noch eines der folgende Zeichen:" - -#. type: TP -#: doc/tin.1:387 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:392 -msgid "" -"This group is unsubscribed. To see only your subscribed groups use the " -"B ('B') or B ('B') toggle " -"keys." -msgstr "" -"Diese Gruppe ist nicht abonniert. Um nur abonnierte Gruppen anzuzeigen kann " -"die B ('B') oder B ('B') " -"Umschalttaste benutzt werden." - -#. type: TP -#: doc/tin.1:392 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:397 -msgid "" -"This is a moderated group. Any posts you make will have to be approved by " -"the group administrator before it will be made public. B will ask for " -"confirmation before you post to a moderated group." -msgstr "" -"Diese Gruppe ist moderiert. Alle Postings müssen erst vom Gruppen-Moderator " -"freigegeben werden bevor sie veröffentlicht werden. B fragt vor dem " -"Posten in eine moderierte Gruppe nach einer Bestätigung." - -#. type: TP -#: doc/tin.1:397 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:406 -msgid "" -"This is a new newsgroup which has been created since you last used B. " -"New newsgroups are not subscribed to by default (However, see the " -"$B / $B environment variables). Subscribe " -"to it in the normal way if you wish the group to continue to appear in your " -"Selection Menu. Simply ignore new newsgroups and they will be gone the next " -"time you start B. You will have to yank in all the groups to find them " -"in a later session." -msgstr "" -"Dies ist eine neue Newsgruppe, die seit der letzten Benutzung von B " -"erstellt wurde. Neue Newsgruppen sind standardmäßig nicht abonniert (siehe " -"jedoch $B / $B Umgebungsvariablen). " -"Abonnieren Sie sie auf die normale Weise, falls die Gruppe weiterhin in " -"Ihrem Auswahlmenü erscheinen soll. Oder Ignorieren Sie sie einfach und sie " -"werden beim nächsten Start von B verschwunden sein. Sie müssten allen " -"Gruppen einblenden, um sie in einer späteren Sitzung zu finden." - -#. type: TP -#: doc/tin.1:406 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:411 -msgid "" -"This group no longer exists. If you no longer wish to see this group then " -"unsubscribe from it in the normal way. This flag will only appear if you " -"have set B to \"ask\" in the Options Menu." -msgstr "" -"Diese Gruppe existiert nicht mehr. Falls Sie diese Gruppe nicht mehr sehen " -"möchten, können Sie sie auf normale Weise abbestellen. Diese Markierung wird " -"nur angezeigt, wenn Sie B im Optionsmenü auf \"ask\" gesetzt " -"haben." - -#. type: TP -#: doc/tin.1:411 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:415 -msgid "" -"You may no longer make posts to this group. Often a group will be superseded " -"by a more appropriately named one." -msgstr "" -"Sie dürfen keine Beiträge mehr in dieser Gruppe verfassen. Oft wird eine " -"Gruppe durch eine mit einem passenderen Namen ersetzt." - -#. type: TP -#: doc/tin.1:415 -#, no-wrap -msgid "B<=>" -msgstr "B<=>" - -#. type: Plain text -#: doc/tin.1:420 -msgid "" -"This group has been renamed and you may no longer post to it. If you do, " -"then you will receive an error from your news server telling you the correct " -"group to post to." -msgstr "" -"Diese Gruppe wurde umbenannt und in sie darf nicht mehr gepostet werden. " -"Falls Sie dies trotzdem versuchen, erhalten Sie eine Fehlermeldung vom " -"Newsserver in der die Gruppe steht in die Sie posten sollten." - -#. type: Plain text -#: doc/tin.1:430 -msgid "" -"At the Group level the title contains the name of the group, the number of " -"conversation threads, the abbreviated threading method (B), " -"the limit of articles to get (if set; B), the total number of " -"(unread) articles (B or B), the number " -"of hot articles B, the number of read hot articles (if " -"any; B), the number of recent articles " -"(B) and the number of killed articles " -"(B). I.e.:" -msgstr "" - -#. FIXME - make this autocenter -#. type: Plain text -#: doc/tin.1:434 -#, no-wrap -msgid " alt.sources (5B -50/23+ 0* 3o 0K)\n" -msgstr " alt.sources (5B -50/23+ 0* 3o 0K)\n" - -#. type: Plain text -#: doc/tin.1:442 -msgid "" -"The characters after the numbers are depending to the configuration and if " -"your are in B mode or not. Some numbers could be " -"missing if the specific option is not enabled. It might also contain an 'M', " -"\\&'X' or '=' (see above; doesn't work with the ''B<-n>'' command-line " -"switch!) if the group is moderated, set to no posting or postings to it get " -"redirected." -msgstr "" - -#. type: Plain text -#: doc/tin.1:451 -msgid "" -"If a thread has unread articles it is marked with B in " -"front of the total number of articles in the thread. If there are recent " -"articles within the thread it might be marked with B in " -"front of the total number of articles in the thread \\(em this is controlled " -"by the B option. If a thread has hot articles in it (see also " -"section \"FILTERING ARTICLES\") it's marked with B in " -"front of the total number of articles in the thread. The display can be " -"customized via B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:455 -#, no-wrap -msgid "\\f(CR de.admin.net-abuse.announce (11B 13+ 1* 1o 0K) M\\fR\n" -msgstr "\\f(CR de.admin.net-abuse.announce (11B 13+ 1* 1o 0K) M\\fR\n" - -#. type: Plain text -#: doc/tin.1:460 -#, no-wrap -msgid "" -"\\f(CR\\(-E 1 + 3 108 bincancels in de.talk.sex Christopher Lueg El\n" -" 2 + 69 EMP/ECP gecancelt. xynx. BI= 10 Henning Weede Ehwee\n" -" 3 o 93 EMP gecancelt. SouthBeach/Palms Henning Weede Ehwee\n" -" 4 * 368 E1997-11-12E Fremdcancel-FAQ Thomas Roessler Ero\\fR\n" -msgstr "" -"\\f(CR\\(-E 1 + 3 108 bincancels in de.talk.sex Christopher Lueg El\n" -" 2 + 69 EMP/ECP gecancelt. xynx. BI= 10 Henning Weede Ehwee\n" -" 3 o 93 EMP gecancelt. SouthBeach/Palms Henning Weede Ehwee\n" -" 4 * 368 E1997-11-12E Fremdcancel-FAQ Thomas Roessler Ero\\fR\n" - -#. FIXME - add description of fields -#. type: Plain text -#: doc/tin.1:465 -msgid "" -"At the Thread level the screen usually (depends on the threading method " -"used) looks like this, but can be customized via B:" -msgstr "" -"Auf Thread-Ebene sieht der Bildschirm normalerweise (abhängig von der " -"verwendeten Thread-Methode) so aus, kann aber über B " -"angepasst werden:" - -#. type: Plain text -#: doc/tin.1:472 -#, no-wrap -msgid "" -"\\f(CR\\(-E 1 [ 7] What is this funny tree in the thr Robert F. Simmig\n" -" 2 [ 12] +\\(-E Sephan Wagner Es\n" -" 3 [ 230] | `\\(-ETin thread-level (was: What is Bob Johnson Ebob\n" -" 4 [ 22] `\\(-Etin threading menu Brian Richardson\\fR\n" -msgstr "" -"\\f(CR\\(-E 1 [ 7] What is this funny tree in the thr Robert F. Simmig\n" -" 2 [ 12] +\\(-E Sephan Wagner Es\n" -" 3 [ 230] | `\\(-ETin thread-level (was: What is Bob Johnson Ebob\n" -" 4 [ 22] `\\(-Etin threading menu Brian Richardson\\fR\n" - -#. FIXME - add description of fields -#. type: Plain text -#: doc/tin.1:477 -msgid "At the Article level the page header has the following format:" -msgstr "In der Artikelebene hat der Kopf der Seite folgendes Format:" - -#. type: Plain text -#: doc/tin.1:483 -#, no-wrap -msgid "" -"\\f(CRSun, 28 Dec 1997 21:21:01 de.admin.news.groups Thread 20 of 86\n" -"Lines 50 Re: EINSPRUCH zu RESULT:de.comm.mobil.ALL Article 47 of 59\n" -"Urs Janssen Eurs@akk.orgE at Arbeitskreis Kultur und Kommunikati\\fR\n" -msgstr "" -"\\f(CRSo, 28 Dez 1997 21:21:01 de.admin.news.groups Thread 20 v. 86\n" -"Zeilen 50 Re: EINSPRUCH zu RESULT:de.comm.mobil.ALL Artikel 47 von 59\n" -"Urs Janssen Eurs@akk.orgE bei Arbeitskreis Kultur und Kommunikati\\fR\n" - -#. type: Plain text -#: doc/tin.1:485 -#, no-wrap -msgid "\\f(CRarticle-body\\fR\n" -msgstr "\\f(CRArtikel-Körper\\fR\n" - -#. type: Plain text -#: doc/tin.1:491 -msgid "" -"The look of the Selection, Group and Thread level can be customized. See the " -"section \"CUSTOMIZING THE SCREEN FORMAT\"." -msgstr "" -"Das Aussehen der Auswahl-, Gruppen- und Threadebene kann individuell " -"angepasst werden. Siehe hierzu den Abschnitt \"ANSICHTEN ANPASSEN\"." - -#. type: SS -#: doc/tin.1:491 -#, no-wrap -msgid "COMMON MOVING KEYS" -msgstr "GEMEINSAME BEWEGUNGSTASTEN" - -#. type: Plain text -#: doc/tin.1:494 -msgid "" -"This table shows the common keys used for moving around all levels within " -"B." -msgstr "" -"Diese Tabelle zeigt Tasten welche in B in allen Ebenen zum Navigieren " -"verwendet werden." - -#. type: ta -#: doc/tin.1:496 -#, no-wrap -msgid "\\w'Beg. of list/article 'u +\\w'ANSI/vt100 'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:504 -#, no-wrap -msgid "" -"\tANSI/vt100\tOther Terminals\n" -"Beg. of list/article\tB\tB (B<^>)\n" -"End of list/article\tB\tB (B<$>)\n" -"Page Up\tB\tB (B, B<^U> or B<^B>)\n" -"Page Down\tB\tB (B<^D> or B<^F> or BSPACEE>)\n" -"Line Up\tB\tB (B or B<^P>)\n" -"Line Down\tB\tB (B or B<^N>)\n" -msgstr "" - -#. type: SS -#: doc/tin.1:508 -#, no-wrap -msgid "COMMON EDITING COMMANDS" -msgstr "GEMEINSAME BEARBEITUNGSBEFEHLE" - -#. type: Plain text -#: doc/tin.1:515 -msgid "" -"An B<\\%emacs>(1) style editing package allows the easy editing of input " -"strings. A history list allows the easy reuse of previously entered " -"strings. In addition to the cursor keys, the following commands are " -"available when editing a string:" -msgstr "" -"Ein B<\\%emacs>(1)-artiges Bearbeitungspaket erlaubt das einfache Bearbeiten " -"von eingegebenen Zeichenketten. Eine Verlaufsliste ermöglicht die einfache " -"Wiederverwendung bereits eingegebener Zeichenketten. Zusätzlich zu den " -"Cursortasten stehen beim Bearbeiten einer Zeichenkette folgende Befehle zur " -"Verfügung:" - -#. type: TP -#: doc/tin.1:515 -#, no-wrap -msgid "B<^A, ^E>" -msgstr "B<^A, ^E>" - -#. type: Plain text -#: doc/tin.1:518 -msgid "move to beginning or end of line, respectively." -msgstr "An den Zeilenanfang bzw. das Zeilenende springen." - -#. type: TP -#: doc/tin.1:518 -#, no-wrap -msgid "B<^F, ^B>" -msgstr "B<^F, ^B>" - -#. type: Plain text -#: doc/tin.1:521 -msgid "non-destructive move forward or back one location, respectively." -msgstr "Zerstörungsfreie Bewegung um eine Position vorwärts bzw. zurück." - -#. type: TP -#: doc/tin.1:521 -#, no-wrap -msgid "B<^D>" -msgstr "B<^D>" - -#. type: Plain text -#: doc/tin.1:525 -msgid "" -"delete the character currently under the cursor, or send EOF if no " -"characters in the buffer." -msgstr "" -"das aktuell unter dem Cursor befindliche Zeichen löschen oder EOF senden, " -"falls keine Zeichen im Puffer vorhanden sind." - -#. type: TP -#: doc/tin.1:525 -#, no-wrap -msgid "B<^H, EDELE>" -msgstr "B<^H, EENTFE>" - -#. type: Plain text -#: doc/tin.1:528 -msgid "delete character left of the cursor." -msgstr "Zeichen links vom Cursor löschen." - -#. type: TP -#: doc/tin.1:528 -#, no-wrap -msgid "B<^K>" -msgstr "B<^K>" - -#. type: Plain text -#: doc/tin.1:531 -msgid "delete from cursor to end of line." -msgstr "Lösche vom Cursor bis zum Zeilenende." - -#. type: TP -#: doc/tin.1:531 -#, no-wrap -msgid "B<^P, ^N>" -msgstr "B<^P, ^N>" - -#. type: Plain text -#: doc/tin.1:534 -msgid "move through history, previous and next, respectively." -msgstr "Durch die Verlaufsliste vorwärts bzw. rückwärts bewegen." - -#. type: TP -#: doc/tin.1:534 -#, no-wrap -msgid "B<^L, ^R>" -msgstr "B<^L, ^R>" - -#. type: Plain text -#: doc/tin.1:537 -msgid "redraw the current line." -msgstr "Aktuelle Zeile neu aufbauen." - -#. type: TP -#: doc/tin.1:537 -#, no-wrap -msgid "BCRE>" -msgstr "BCRE>" - -#. type: Plain text -#: doc/tin.1:541 -msgid "" -"places line on history list if non-blank, appends newline and returns to the " -"caller." -msgstr "" -"setzt die Zeile in der Verlaufsliste, falls sie nicht leer ist; fügt eine " -"Leerzeile an und kehrt zum Anrufer zurück." - -#. type: TP -#: doc/tin.1:541 -#, no-wrap -msgid "BESCE>" -msgstr "BESCE>" - -#. type: Plain text -#: doc/tin.1:546 -msgid "aborts the present editing operation." -msgstr "bricht den gegenwärtigen Bearbeitungsvorgang ab." - -#. type: SS -#: doc/tin.1:546 -#, no-wrap -msgid "GLOBAL COMMANDS" -msgstr "ALLGEMEINE BEFEHLE" - -#. type: Plain text -#: doc/tin.1:549 -msgid "" -"The following commands are available at all 4 menu levels and always have " -"the same effect." -msgstr "" -"Die folgenden Befehle stehen in allen vier Ebenen zur Verfügung und bewirken " -"überall das Gleichen." - -#. type: TP -#: doc/tin.1:549 doc/tin.1:1455 doc/tin.1:1509 doc/tin.1:1555 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:554 -msgid "" -"Shell escape. B by itself will launch a shell, B " -"EcommandE will run an external EcommandE. This facility may " -"have been disabled by the System Administrator." -msgstr "" -"Shell-Escape. B startet selbstständig eine Shell, " -"B EcommandE führt ein externes EcommandE aus. " -"Diese Funktion wurde möglicherweise vom Systemadministrator deaktiviert." - -#. type: TP -#: doc/tin.1:554 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:557 -msgid "Toggle use of ANSI color." -msgstr "ANSI Farben ein-/ausschalten." - -#. type: TP -#: doc/tin.1:557 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:560 -msgid "Redraw the current screen." -msgstr "Bildschirminhalt neu aufbauen." - -#. type: TP -#: doc/tin.1:560 -#, no-wrap -msgid "B'>" -msgstr "B'>" - -#. type: Plain text -#: doc/tin.1:563 -msgid "Scroll screen up by one line." -msgstr "Eine Zeile nach oben blättern (scrollen)." - -#. type: TP -#: doc/tin.1:563 -#, no-wrap -msgid "B'>" -msgstr "B'>" - -#. type: Plain text -#: doc/tin.1:566 -msgid "Scroll screen down by one line." -msgstr "Eine Zeile nach unten blättern (scrollen)." - -#. type: TP -#: doc/tin.1:566 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:580 -msgid "" -"Reload postponed article. If your system blocks the B key you " -"must quote it by pressing 'B<^V>' (CTRL-V) first. The postpone-menu offers " -"the following actions: B ('B') = reload and spawn editor; " -"B ('B') = post article (without spawning editor); " -"B ('B') = post all postponed articles (without spawning " -"editor); B ('B') = skip this article; B ('B') = quit " -"postponed menu. Currently there is no 'simple' way to delete a postponed " -"article from the postponed-file, you have to use the following command " -"sequence instead: reload it with B, enter editor with " -"B, quit editor, discard posting with B " -"('B<^O>''B''B'). See also ''B<-o>'' command-line switch." -msgstr "" - -#. type: TP -#: doc/tin.1:580 doc/tin.1:1461 doc/tin.1:1516 doc/tin.1:1561 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:586 -msgid "" -"Help screen of commands available on the current menu. You can use " -"B ('B'), B ('B') and B " -"('B<\\(rs>') to search on this screen. B ('B') returns to the menu." -msgstr "" -"Hilfebildschirm mit den im aktuellen Menü verfügbaren Befehlen. Sie können " -"B ('B'), B ('B') und B " -"('B<\\(rs>') verwenden, um darin zu suchen. B ('B') kehrt zum Menü " -"zurück." - -#. type: TP -#: doc/tin.1:586 doc/tin.1:1464 doc/tin.1:1519 doc/tin.1:1564 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:590 doc/tin.1:1468 doc/tin.1:1523 doc/tin.1:1568 -msgid "" -"Toggle the display of help mini menu at the bottom of the screen and posting " -"etiquette after composing an article (B)." -msgstr "" -"Mini-Hilfe am unterem Bildschirmrand und Posting Etikette nach dem Verfassen " -"eines Artikels ein-/ausschalten (B)." - -#. type: TP -#: doc/tin.1:590 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:595 -msgid "" -"List articles posted by user. The date posted, the newsgroup and the subject " -"are listed. See the section \"POSTING HISTORY LISTING\" for more information." -msgstr "" -"Listet die vom Benutzer geposteten Artikel auf. Es werden das Datum des " -"Postings, die Newsgruppe und das Thema aufgelistet. Weitere Informationen " -"finden Sie im Abschnitt \"POSTING VERLAUFSLISTE\"." - -#. type: TP -#: doc/tin.1:595 -#, no-wrap -msgid "B" -msgstr "B" - -#. ------------------------------------------------------------------- -#. type: Plain text -#: doc/tin.1:600 -msgid "Print B version information." -msgstr "Versions-Informationen ausgeben." - -#. type: SS -#: doc/tin.1:600 -#, no-wrap -msgid "NEWSGROUP SELECTION COMMANDS" -msgstr "BEFEHLE ZUR GRUPPENAUSWAHL" - -#. type: TP -#: doc/tin.1:601 doc/tin.1:742 doc/tin.1:998 doc/tin.1:1176 doc/tin.1:3812 -#, no-wrap -msgid "B<4>" -msgstr "B<4>" - -#. type: Plain text -#: doc/tin.1:604 -msgid "Select group 4." -msgstr "Gruppe 4 auswählen." - -#. type: TP -#: doc/tin.1:604 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:608 -msgid "" -"Reset I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file. This will destroy all " -"records of which articles have been read, so use this carefully." -msgstr "" -"Setzt die Datei I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> zurück. Dies zerstört " -"alle Aufzeichnungen über gelesene Artikel, also benutze diese Funktion mit " -"Vorsicht." - -#. type: TP -#: doc/tin.1:608 doc/tin.1:763 doc/tin.1:1019 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:612 doc/tin.1:767 doc/tin.1:1023 -msgid "" -"Choose a range of articles to be affected by the next command. See the " -"section \"RANGES\" for more information." -msgstr "" -"Wählen Sie eine Reihe von Artikeln auf die der nächste Befehl angewendet " -"wird. Siehe Abschnitt \"BEREICHE\" für weitere Informationen." - -#. type: TP -#: doc/tin.1:612 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:615 -msgid "Sort the list of newsgroups." -msgstr "Liste vorhandener Newsgruppen sortieren." - -#. type: TP -#: doc/tin.1:615 doc/tin.1:770 doc/tin.1:1026 doc/tin.1:1236 doc/tin.1:1452 -#: doc/tin.1:1503 doc/tin.1:1552 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:618 doc/tin.1:773 doc/tin.1:1029 doc/tin.1:1239 doc/tin.1:1455 -#: doc/tin.1:1506 doc/tin.1:1555 -msgid "Repeat the previous search." -msgstr "Vorherige Suche wiederholen." - -#. type: TP -#: doc/tin.1:618 doc/tin.1:773 doc/tin.1:1029 doc/tin.1:1239 doc/tin.1:1446 -#: doc/tin.1:1497 doc/tin.1:1546 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:621 -msgid "Search for a group by name and description (if displayed)." -msgstr "" -"Vorwärts nach einer Gruppe anhand des Namens und/oder der Kurzbeschreibung " -"(falls angezeigt) suchen." - -#. type: TP -#: doc/tin.1:621 doc/tin.1:776 doc/tin.1:1032 doc/tin.1:1242 doc/tin.1:1449 -#: doc/tin.1:1500 doc/tin.1:1549 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:624 -msgid "Backward search through the group names and descriptions." -msgstr "" -"Rückwärts mach einer Gruppe anhand des Namens und/oder der Kurzbeschreibung " -"(falls angezeigt) suchen." - -#. type: TP -#: doc/tin.1:624 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:627 -msgid "Read current group." -msgstr "Lese die aktuelle Gruppe." - -#. type: TP -#: doc/tin.1:627 -#, no-wrap -msgid "BTABE' 'n'>" -msgstr "BTABE' 'n'>" - -#. type: Plain text -#: doc/tin.1:631 -msgid "" -"Enter next group with unread news. Will wrap around to the beginning of the " -"group selection list looking for unread groups." -msgstr "" -"Nächste Gruppe mit ungelesenen Nachrichten betreten. Wechselt zum Anfang der " -"Gruppenliste und sucht nach ungelesenen Gruppen." - -#. type: TP -#: doc/tin.1:631 doc/tin.1:851 doc/tin.1:1070 doc/tin.1:1300 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:635 -msgid "" -"Make current group as all read [after confirmation] and move to the next " -"group in the group selection list." -msgstr "" -"Aktuelle Gruppe als gelesen markieren [nach Bestätigung] und zur nächsten " -"Gruppe in der Gruppenauswahlliste wechseln." - -#. type: TP -#: doc/tin.1:635 doc/tin.1:855 doc/tin.1:1074 doc/tin.1:1304 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:639 -msgid "" -"Mark current group as all read [after confirmation] and enter the next " -"unread group in the group selection list." -msgstr "" -"Aktuelle Gruppe als gelesen markieren [nach Bestätigung] und zur nächsten " -"ungelesenen Gruppe in der Gruppenauswahlliste wechseln." - -#. type: TP -#: doc/tin.1:639 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:643 -msgid "" -"Toggle display to show just the group name or the group name and the group " -"descriptions." -msgstr "" -"Schaltet die Anzeige zwischen nur den Gruppennamen oder den Gruppennamen und " -"der Gruppenbeschreibungen um." - -#. type: TP -#: doc/tin.1:643 doc/tin.1:868 doc/tin.1:1087 doc/tin.1:1316 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:646 doc/tin.1:871 doc/tin.1:1090 doc/tin.1:1319 -msgid "Edit the filter file and reload it afterwards." -msgstr "Filter-Datei bearbeiten und danach anwenden." - -#. type: TP -#: doc/tin.1:646 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:650 doc/tin.1:875 -msgid "" -"Choose a new group by name. This command can be used to access any group, " -"even those not currently yanked in." -msgstr "" -"Wählt eine neue Gruppe nach Namen aus. Mit diesem Befehl kann auf jede " -"Gruppe zugegriffen werden, auch auf solche, die gerade nicht eingeblendet " -"werden." - -#. type: TP -#: doc/tin.1:650 doc/tin.1:878 doc/tin.1:1096 doc/tin.1:1332 doc/tin.1:1458 -#: doc/tin.1:1512 doc/tin.1:1558 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:655 -msgid "" -"Toggle the display of the description of the current newsgroup in the last " -"line. This will not be available if B was started with the \\&''B<-d>'' " -"option." -msgstr "" -"Umschalten der Anzeige der Beschreibung der aktuellen Newsgroup in der " -"letzten Zeile. Dies ist nicht verfügbar, wenn B mit \\&''B<-d>'' " -"gestartet wurde." - -#. type: TP -#: doc/tin.1:655 doc/tin.1:882 doc/tin.1:1099 doc/tin.1:1335 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:658 doc/tin.1:885 doc/tin.1:1102 doc/tin.1:1338 -msgid "Toggle inverse video." -msgstr "(De)aktiviere inverse Darstellung." - -#. type: TP -#: doc/tin.1:658 doc/tin.1:885 doc/tin.1:1102 doc/tin.1:1338 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:661 doc/tin.1:888 doc/tin.1:1105 doc/tin.1:1341 -msgid "Show details about current connection." -msgstr "Informationen zur aktuellen Verbindung anzeigen." - -#. type: TP -#: doc/tin.1:661 doc/tin.1:897 doc/tin.1:1111 doc/tin.1:1347 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:668 -msgid "" -"Look up article by ''Message-ID:''. If none of the groups listed in the " -"''Newsgroups:''-header of the referenced article is available, just the " -"contents of the ''Newsgroups:''-header will be displayed in the last line. " -"At this level this command only works if reading via NNTP and the server " -"supports [X]HDR (B, B) or XPAT (B)." -msgstr "" -"Artikel anhand der ''Message-ID:'' Nachschlagen. Wenn keine der in den " -"''Newsgroups:''-Kopfzeilen des referenzierten Artikels aufgeführten Gruppen " -"verfügbar ist, wird in der letzten Zeile nur der Inhalt der ''Newsgroups:''-" -"Kopfzeilen angezeigt. Auf dieser Ebene funktioniert dieser Befehl nur beim " -"Lesen mittels NNTP und der Server muss [X]HDR (B, B) " -"oder XPAT (B) unterstützen." - -#. type: TP -#: doc/tin.1:668 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:674 -msgid "" -"Move the current group within the group selection list. By entering '1' the " -"group will become the first displayed group in the list, by entering '8' the " -"eighth group in the list etc. By entering '$' the group will be the last " -"group displayed." -msgstr "" -"Verschieben Sie die aktuelle Gruppe innerhalb der Gruppenauswahlliste. Durch " -"Eingabe von '1' wird die Gruppe zur ersten angezeigten Gruppe in der Liste, " -"durch Eingabe von '8' zur achten Gruppe in der Liste usw. Durch Eingabe von " -"'$' wird die Gruppe zur letzten angezeigten Gruppe." - -#. type: TP -#: doc/tin.1:674 doc/tin.1:906 doc/tin.1:1356 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:678 doc/tin.1:910 doc/tin.1:1360 -msgid "" -"User configurable options menu (for more information see section \"GLOBAL " -"OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES\")." -msgstr "" -"Menü für benutzerkonfigurierbare Optionen (weitere Informationen finden sich " -"im Abschnitt \"GLOBALES OPTIONSMENÜ UND KONFIGURIERBARE TINRC VARIABLEN\")." - -#. type: TP -#: doc/tin.1:678 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:681 -msgid "Positions the cursor on the next group with unread articles in it." -msgstr "Setzt den Cursor auf die nächste Gruppe mit ungelesenen Artikeln." - -#. type: TP -#: doc/tin.1:681 doc/tin.1:927 doc/tin.1:1125 doc/tin.1:1377 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:685 -msgid "" -"Quit B \\(em ask the user to confirm if B is set " -"accordingly." -msgstr "" -"B beenden, falls B gesetzt ist wird nochmal nachgefragt." - -#. type: TP -#: doc/tin.1:685 doc/tin.1:930 doc/tin.1:1128 doc/tin.1:1380 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:688 doc/tin.1:933 doc/tin.1:1131 doc/tin.1:1383 -msgid "Quit B \\(em don't ask the user to confirm." -msgstr "Beendet B sofort, ohne Bestätigungsnachfrage." - -#. type: TP -#: doc/tin.1:688 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:693 -msgid "" -"Toggle display of all subscribed to groups and just those groups containing " -"unread articles. Command has no effect if groups were specified on the " -"command-line when B was started." -msgstr "" -"Anzeige aller abonnierten Gruppen und nur der Gruppen mit ungelesenen " -"Artikeln umschalten. Der Befehl hat keine Auswirkung, wenn beim Start von " -"B Gruppen in der Befehlszeile angegeben wurden." - -#. type: TP -#: doc/tin.1:693 doc/tin.1:936 doc/tin.1:1131 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:697 doc/tin.1:940 doc/tin.1:1135 -msgid "" -"Mail a bug report or comment to Etin-bugs@tin.orgE. This is the best " -"way of getting bugs fixed and features added/changed." -msgstr "" -"Einen Fehlerbericht oder Kommentar an Etin-bugs@tin.orgE senden. " -"Dies ist der sinnvollste Weg um Fehler zu melden und behoben zu bekommen " -"bzw. nach neuen Funktionen zu fragen." - -#. type: TP -#: doc/tin.1:697 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:700 -msgid "Subscribe to current group." -msgstr "Ausgewählte Gruppe abonnieren." - -#. type: TP -#: doc/tin.1:700 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:705 -msgid "" -"Subscribe to groups matching user specified pattern. See the section " -"\"NEWSGROUP LISTS & WILDCARDS\" for the types of pattern that B " -"understands." -msgstr "" -"Abonnieren Sie Gruppen, die dem vom Benutzer angegebenen Muster entsprechen. " -"Siehe den Abschnitt \"NEWSGROUP LISTEN & WILDCARDS\" für die Mustertypen, " -"die B versteht." - -#. type: TP -#: doc/tin.1:705 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:710 -msgid "" -"Unsubscribe to current group. This can be used to remove bogus groups. See " -"B in the \"GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE " -"VARIABLES\" section." -msgstr "" -"Aktuelle Gruppe abbestellen. Dies kann zum Entfernen ungültiger Gruppen " -"verwendet werden. Siehe B im Abschnitt \"MENÜ DER GLOBALE " -"OPTIONEN UND KONFIGURIERBAREN TINRC-VARIABLEN\"." - -#. type: TP -#: doc/tin.1:710 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:715 -msgid "" -"Unsubscribe to groups matching user specified pattern. See the section " -"\"NEWSGROUP LISTS & WILDCARDS\" for the types of pattern that B " -"understands." -msgstr "" -"Abmelden von Gruppen, die dem vom Benutzer angegebenen Muster entsprechen. " -"Siehe den Abschnitt \"NEWSGROUP LISTEN & WILDCARDS\" für die Mustertypen, " -"die tin versteht." - -#. type: TP -#: doc/tin.1:715 doc/tin.1:965 doc/tin.1:1154 doc/tin.1:1417 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:721 -msgid "" -"Post an article to current group. If posting fails for some reason, you'll " -"get the chance to B ('B') the article again, B " -"('B') it for later processing (see also ''B<-o>'' command-line switch) or " -"discard it via B ('B')." -msgstr "" - -#. type: TP -#: doc/tin.1:721 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:724 -msgid "Quit B without saving any changes to the configuration." -msgstr "" -"B beenden ohne ggf. gemachte Änderungen an den Einstellung zu speichern." - -#. type: TP -#: doc/tin.1:724 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:729 -msgid "" -"Yanks in all groups. Toggles the displayed groups between all the groups in " -"the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file and just " -"those that are subscribed to in I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>." -msgstr "" - -#. type: TP -#: doc/tin.1:729 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:733 -msgid "" -"Reread the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file " -"to see if any new news has arrived since starting B." -msgstr "" -"Liest die Datei I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> " -"erneut ein, um zu sehen, ob seit dem Start von B neue Nachrichten " -"eingetroffen sind." - -#. type: TP -#: doc/tin.1:733 -#, no-wrap -msgid "B" -msgstr "B" - -#. ------------------------------------------------------------------- -#. type: Plain text -#: doc/tin.1:738 -msgid "Mark all articles in the current group as unread." -msgstr "Alle Artikel in der aktuellen Gruppe als ungelesen markieren." - -#. type: SS -#: doc/tin.1:738 -#, no-wrap -msgid "GROUP INDEX COMMANDS" -msgstr "GRUPPEN-INDEX-BEFEHLE" - -#. type: Plain text -#: doc/tin.1:742 -msgid "" -"All searches in this level are limited to unread articles if in " -"B mode. B ('B') can be use " -"toggle the setting right before/after the search." -msgstr "" -"Alle Suchen auf dieser Ebene sind im B-Modus auf " -"ungelesene Artikel beschränkt. B ('B') kann " -"verwendet werden, um die Einstellung direkt vor/nach der Suche umzuschalten." - -#. type: Plain text -#: doc/tin.1:745 -msgid "Select article 4." -msgstr "Artikel 4 auswählen." - -#. type: TP -#: doc/tin.1:745 doc/tin.1:1001 doc/tin.1:1179 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:749 doc/tin.1:1005 doc/tin.1:1183 -msgid "" -"Auto select article(s) using a menu. Read the section \"FILTERING ARTICLES\" " -"for more information." -msgstr "" -"Automatische Hervorheben des/der Artikel(s) über ein Menü. Lesen Sie den " -"Abschnitt \"FILTERN VON ARTIKELN\" für weitere Informationen." - -#. type: TP -#: doc/tin.1:749 doc/tin.1:1005 doc/tin.1:1198 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:753 doc/tin.1:1009 doc/tin.1:1202 -msgid "" -"Kill article(s) using a menu. Read the section \"FILTERING ARTICLES\" for " -"more information." -msgstr "" -"Artikel mit Hilfe eines Menüs ausblenden. Lesen Sie für weitere " -"Informationen den Abschnitt \"FILTERN VON ARTIKELN\"." - -#. type: TP -#: doc/tin.1:753 doc/tin.1:1009 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:758 doc/tin.1:1014 -msgid "" -"Mark current article, thread, range, auto-selected (hot) articles, articles " -"matching pattern or tagged articles as read. A prompt asks which type should " -"be marked." -msgstr "" -"Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte " -"(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als " -"gelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll." - -#. type: TP -#: doc/tin.1:758 doc/tin.1:1014 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:763 doc/tin.1:1019 -msgid "" -"Mark current article, thread, range, auto-selected (hot) articles, articles " -"matching pattern or tagged articles as unread. A prompt asks which type " -"should be marked." -msgstr "" -"Markiert den aktuellen Artikel, Thread, Bereich, automatisch ausgewählte " -"(heiße) Artikel, Artikel mit Musterübereinstimmung oder getaggte Artikel als " -"ungelesen. Eine Eingabeaufforderung fragt, welcher Typ markiert werden soll." - -#. type: TP -#: doc/tin.1:767 doc/tin.1:1023 doc/tin.1:1233 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:770 doc/tin.1:1026 doc/tin.1:1236 -msgid "Re-enter the last message that was viewed." -msgstr "Zur zuletzt angezeigte Nachricht springen." - -#. type: Plain text -#: doc/tin.1:776 doc/tin.1:1032 -msgid "Search forward for specified subject." -msgstr "Vorwärts nach dem angegebenem Subject suchen." - -#. type: Plain text -#: doc/tin.1:779 doc/tin.1:1035 -msgid "Search backwards for specified subject." -msgstr "Rückwärts nach dem angegebenem Subject suchen." - -#. type: TP -#: doc/tin.1:779 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:782 doc/tin.1:1038 -msgid "Select current thread for later processing." -msgstr "Wähle aktuellen Thread für die spätere Verarbeitung aus." - -#. type: TP -#: doc/tin.1:782 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:786 -msgid "" -"Selects all threads in current group. It is a shortcut for calling " -"B with a pattern of ''*''." -msgstr "" -"Wählt alle Threads in der aktuellen Gruppe aus. Es ist eine Abkürzung für " -"B mit einem Muster von ''*''." - -#. type: TP -#: doc/tin.1:786 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:791 -msgid "" -"Toggle selection of current thread. If at least one unread article, (but not " -"every unread article) in the current thread is selected, then all unread " -"articles become selected." -msgstr "" -"Auswahl des aktuellen Threads umschalten. Wenn mindestens ein ungelesener " -"Artikel (aber nicht jeder ungelesene Artikel) im aktuellen Thread ausgewählt " -"ist, werden alle ungelesenen Artikel ausgewählt." - -#. type: TP -#: doc/tin.1:791 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:796 -msgid "" -"For each thread in current group, if it at least one unread article is " -"selected, all unread articles become selected. This is useful for auto-" -"selection on author where reader wants to see entire thread." -msgstr "" -"Wenn für jeden Thread in der aktuellen Gruppe mindestens ein ungelesener " -"Artikel ausgewählt ist, werden alle ungelesenen Artikel ausgewählt. Dies ist " -"nützlich für die automatische Auswahl anhand des Autors, wenn der Leser den " -"gesamten Thread sehen möchte." - -#. type: TP -#: doc/tin.1:796 -#, no-wrap -msgid "B" - -#. type: Plain text -#: doc/tin.1:802 -msgid "" -"Prompts for a pattern with which to match on. All threads whose subjects " -"match the pattern will be marked selected. A pattern of ''*'' will match all " -"subjects. Entering just 'BCRE>' will reuse the last pattern that " -"was entered." -msgstr "" -"Fordert zur Eingabe eines Musters auf, mit dem verglichen werden soll. Alle " -"Threads, deren Subject mit dem Muster übereinstimmen, werden als ausgewählt " -"markiert. Wenn nur 'BCRE>' eingeben, wird das zuletzt eingegebene " -"Muster wiederverwendet." - -#. type: TP -#: doc/tin.1:802 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:805 -msgid "Reverse all selections on all articles." -msgstr "Markierung für alle Artikel umkehren." - -#. type: TP -#: doc/tin.1:805 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:811 -msgid "" -"Undo all selections on all articles. It clears the toggle effect of " -"B ('B') command. Thus after first doing a " -"B, one can then do B to reset articles. " -"Thus, one can iteratively whittle down uninteresting threads." -msgstr "" - -#. type: TP -#: doc/tin.1:811 doc/tin.1:1047 doc/tin.1:1259 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:816 doc/tin.1:1052 doc/tin.1:1264 -msgid "" -"Pipe current article / thread / auto-selected (hot) articles / articles " -"matching pattern / tagged articles into command. See the section \"MAILING " -"PIPING PRINTING REPOSTING AND SAVING ARTICLES\" for more information." -msgstr "" -"Leitet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) " -"Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den " -"Befehl weiter. Mehr Informationen finden Sie im Abschnitt \"MAILEN, " -"WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN\"." - -#. type: TP -#: doc/tin.1:816 doc/tin.1:1264 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:825 -msgid "" -"Auto select article(s) with a single key [after confirmation]. The defaults " -"used for selection are based upon the following four tinrc config variables: " -"B, B, " -"B and B. Read " -"the section \"GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES\" for a " -"full explanation of these variables and \"FILTERING ARTICLES\" for more " -"information on filtering." -msgstr "" - -#. type: TP -#: doc/tin.1:825 doc/tin.1:1273 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:834 -msgid "" -"Kill article(s) with a single key [after confirmation]. The defaults used " -"for killing are based upon the following four tinrc config variables: " -"B, B, " -"B and B. Read the " -"section \"GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES\" for a full " -"explanation of these variables and \"FILTERING ARTICLES\" for more " -"information on filtering." -msgstr "" - -#. type: TP -#: doc/tin.1:834 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:837 -msgid "Read current article." -msgstr "Lese den aktuelle Artikel." - -#. type: TP -#: doc/tin.1:837 -#, no-wrap -msgid "BTABE'>" -msgstr "BTABE'>" - -#. type: Plain text -#: doc/tin.1:840 -msgid "View next unread article or group." -msgstr "" -"Zeige den nächsten ungelesenen Artikel oder die nächste ungelesene Gruppe." - -#. type: TP -#: doc/tin.1:840 doc/tin.1:1058 doc/tin.1:1290 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:844 -msgid "" -"Author forward search. This searches for articles with a specific ''From:'' " -"line." -msgstr "" -"Autoren-Suche vorwärts. Sucht nach Artikeln mit einem bestimmtem ''From:''-" -"Header." - -#. type: TP -#: doc/tin.1:844 doc/tin.1:1063 doc/tin.1:1293 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:847 doc/tin.1:1066 -msgid "Author backward search. Otherwise, see B ('B') above." -msgstr "Autoren-Suche rückwärts. Siehe auch B ('B') oben." - -#. type: TP -#: doc/tin.1:847 doc/tin.1:1066 doc/tin.1:1296 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:851 doc/tin.1:1070 doc/tin.1:1300 -msgid "" -"Search the body of all articles in group (can be slow). You can abort the " -"search using B ('B')." -msgstr "" -"Durchsuche die Körper aller Artikel in der Gruppe (kann langsam sein). Die " -"Suche kann mit B ('B') abgebrochen werden." - -#. type: Plain text -#: doc/tin.1:855 -msgid "" -"Mark all articles as read [after confirmation] then return to the group " -"selection list. Move cursor to next group." -msgstr "" -"Markiert alle Artikel als gelesen [nach Bestätigung] und kehrt dann zur " -"Gruppenauswahlliste zurück." - -#. type: Plain text -#: doc/tin.1:859 -msgid "" -"Mark all articles as read [after confirmation] and enter the next group with " -"unread news." -msgstr "" -"Markiert alle Artikel als gelesen [nach Bestätigung] und betritt die nächste " -"Gruppe mit ungelesenen Nachrichten." - -#. type: TP -#: doc/tin.1:859 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:863 doc/tin.1:1082 -msgid "" -"Cycle the display of the author through all the possible options for the " -"tinrc variable B." -msgstr "" -"Durchläuft die Anzeige des Autors durch alle möglichen Optionen für die " -"tinrc-Variable B." - -#. type: TP -#: doc/tin.1:863 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:868 doc/tin.1:1087 doc/tin.1:1313 -msgid "" -"Cancel (delete) or supersede (overwrite) the current article. It must have " -"been posted by the same user. The cancel message can be seen in the " -"newsgroup 'control' or 'control.cancel'." -msgstr "" -"Löschen (cancel) oder Ersetzen (supersede) des aktuellen Artikels. Er muss " -"vom selben Benutzer geschrieben worden sein. Die Nachricht zum Löschen ist " -"in der Newsgruppe 'control' oder 'control.cancel' zu sehen." - -#. type: TP -#: doc/tin.1:871 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:875 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:878 -msgid "Toggle article/group limit." -msgstr "Artikel/Gruppe Beschränkungen ein-/ausschalten." - -#. type: Plain text -#: doc/tin.1:882 -msgid "" -"Display the subject of the first article in the current thread in the last " -"line." -msgstr "" -"Subject des ersten Artikels im aktuellen Thread in der letzten Zeile " -"anzeigen." - -#. type: TP -#: doc/tin.1:888 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:894 -msgid "" -"Mark article/thread as read and move onto the next unread article/thread. If " -"a range of articles/threads is set, the range will be marked as read instead " -"of the current article/thread. When tagged articles/threads are present, a " -"prompt asks how to proceed." -msgstr "" -"Markieren den Artikel/Thread als gelesen und fährt mit dem nächsten " -"ungelesenen Artikel/Thread fort. Wenn ein Bereich von Artikeln/Threads " -"festgelegt ist, wird der Bereich als gelesen markiert und nicht der aktuelle " -"Artikel/Thread. Falls getaggte Artikel/Threads vorhanden sind, wird gefragt, " -"wie fortgefahren werden soll." - -#. type: TP -#: doc/tin.1:894 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:897 -msgid "Open the thread under the current cursor position." -msgstr "Öffnet den Thread unter der aktuellen Cursorposition." - -#. type: Plain text -#: doc/tin.1:901 doc/tin.1:1115 doc/tin.1:1351 -msgid "" -"Look up article by ''Message-ID:''. In this level only the IDs in the " -"current group are searched." -msgstr "" -"Artikel nach ''Message-ID:'' suchen. In dieser Ebene werden nur die IDs in " -"der aktuellen Gruppe durchsucht." - -#. type: TP -#: doc/tin.1:901 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:906 doc/tin.1:1120 doc/tin.1:1356 -msgid "" -"Mail current article / thread / auto-selected (hot) articles / articles " -"matching pattern / tagged articles to someone. See the section \"MAILING " -"PIPING PRINTING REPOSTING AND SAVING ARTICLES\" for more information." -msgstr "" -"Mailt den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) " -"Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an " -"jemanden weiter. Mehr Informationen finden Sie im Abschnitt \"MAILEN, " -"WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN\"." - -#. type: TP -#: doc/tin.1:910 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:913 -msgid "Go to next group." -msgstr "Zur nächsten Newsgruppe springen." - -#. type: TP -#: doc/tin.1:913 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:916 doc/tin.1:1366 -msgid "Go to the next unread article." -msgstr "Zum nächsten ungelesenen Artikel springen." - -#. type: TP -#: doc/tin.1:916 doc/tin.1:1120 doc/tin.1:1366 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:921 doc/tin.1:1125 doc/tin.1:1371 -msgid "" -"Send current article / thread / auto-selected (hot) articles / articles " -"matching pattern / tagged articles to printer. See the section \"MAILING " -"PIPING PRINTING REPOSTING AND SAVING ARTICLES\" for more information." -msgstr "" -"Sendet den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) " -"Artikel / Artikel, die dem Muster entsprechen / markierte Artikel an den " -"Drucker. Mehr Informationen finden Sie im Abschnitt \"MAILEN, WEITERLEITEN, " -"DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN\"." - -#. type: TP -#: doc/tin.1:921 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:924 -msgid "Go to previous group." -msgstr "Zur vorherigen Gruppe springen." - -#. type: TP -#: doc/tin.1:924 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:927 -msgid "Go to previous unread article." -msgstr "Zum vorherigen ungelesenen Artikel gehen." - -#. type: Plain text -#: doc/tin.1:930 doc/tin.1:1128 -msgid "Return to previous level." -msgstr "Kehre zur vorherigen Ebene zurück." - -#. type: TP -#: doc/tin.1:933 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:936 -msgid "Toggle the display between all articles and unread articles." -msgstr "Wechselt zwischen der Anzeige aller und nur ungelesener Artikel." - -#. type: TP -#: doc/tin.1:940 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:945 doc/tin.1:1140 doc/tin.1:1396 -msgid "" -"Save current article / thread / auto-selected (hot) articles / articles " -"matching pattern / tagged articles. See the section \"MAILING PIPING " -"PRINTING REPOSTING AND SAVING ARTICLES\" for more information." -msgstr "" -"Speichert den aktuellen Artikel / Thread / automatisch ausgewählte (heiße) " -"Artikel / Artikel, die dem Muster entsprechen / markierte Artikel. Mehr " -"Informationen finden Sie im Abschnitt \"MAILEN, WEITERLEITEN, DRUCKEN, " -"NACHSENDEN UND SPEICHERN VON ARTIKELN\"." - -#. type: TP -#: doc/tin.1:945 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:948 doc/tin.1:1143 doc/tin.1:1399 -msgid "Save marked articles automatically without further prompting." -msgstr "Markierte Artikel automatisch ohne weiteres Nachfragen speichern." - -#. type: TP -#: doc/tin.1:948 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:953 -msgid "" -"Toggle tag-status of current article / thread for B ('B') / " -"B ('B<|>') / B ('B') / B ('B') / " -"B ('B')." -msgstr "" -"Tag-Status des aktuellen Artikels/Threads für B ('B') / " -"B ('B<|>') / B ('B') / B ('B') / " -"B ('B') umschalten." - -#. type: TP -#: doc/tin.1:953 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:957 doc/tin.1:1151 -msgid "" -"Automatically tag/untag all the parts of the current multi-part message in " -"order." -msgstr "" -"Alle Teile der aktuellen mehrteiligen Nachricht automatisch in der " -"Reihenfolge markieren bzw. die vorhandenen Markierungen entfernen." - -#. type: TP -#: doc/tin.1:957 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:962 -msgid "" -"Cycle the threading mode through no threading, threading by subject, " -"threading by references, threading on both subject and references, group " -"multipart articles into a thread (''Subject:'' based)." -msgstr "" - -#. type: TP -#: doc/tin.1:962 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:965 -msgid "Untag all articles that were tagged." -msgstr "Markierung aller markierten Artikel entfernen." - -#. type: Plain text -#: doc/tin.1:972 doc/tin.1:1161 doc/tin.1:1424 -msgid "" -"Post an article to the current group. If posting fails for some reason, " -"you'll get the chance to edit the article again via B ('B'), " -"postpone it for later processing via B ('B') (see also ''B<-" -"o>'' command-line switch) or discard it via B ('B')." -msgstr "" -"Veröffentlichen Sie einen Artikel in der aktuellen Gruppe. Wenn das " -"Versenden aus irgendeinem Grund fehlschlägt, haben Sie die Möglichkeit, den " -"Artikel über B ('B') erneut zu bearbeiten, ihn über " -"B ('B') für eine spätere Bearbeitung zurückzustellen (siehe " -"auch ''B<-o>'' Kommandozeilenschalter) oder ihn über B ('B') zu " -"verwerfen." - -#. type: TP -#: doc/tin.1:972 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:978 doc/tin.1:1430 -msgid "" -"Repost an already posted article / thread / auto-selected (hot) articles / " -"articles matching pattern / tagged articles to another newsgroup(s). Useful " -"for reposting from global to local newsgroups. Do not use this to crosspost " -"your own articles." -msgstr "" -"Erneutes Posten eines bereits geposteten Artikels / Threads / automatisch " -"ausgewählter (heißer) Artikel / Artikel, die einem Muster entsprechen / mit " -"Tags versehenen Artikel in eine andere Newsgroup. Nützlich zum " -"Wiederveröffentlichen von globalen zu lokalen Newsgroups. Nicht verwenden um " -"eigenen Artikel mehrfach zu posten." - -#. type: TP -#: doc/tin.1:978 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:986 -msgid "" -"Mark all unread articles that have not been selected as read, redraw screen " -"to reflect changes and put index at the first thread to begin reading. " -"Pressing B ('B') again will toggle back to the way " -"it was before. See B ('B<~>') command for clearing the toggle " -"effect, leaving the group will also clear the toggle effect and make the " -"changes permanent." -msgstr "" - -#. type: TP -#: doc/tin.1:986 doc/tin.1:1161 doc/tin.1:1430 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:989 -msgid "Mark current article as unread." -msgstr "Aktuellen Artikel als ungelesen markieren." - -#. type: TP -#: doc/tin.1:989 doc/tin.1:1166 doc/tin.1:1433 -#, no-wrap -msgid "B" -msgstr "B" - -#. ------------------------------------------------------------------- -#. type: Plain text -#: doc/tin.1:996 -msgid "" -"Mark current thread as unread. If a range of threads is set, the range will " -"be marked as unread instead of the current thread. When tagged threads are " -"present, a prompt asks how to proceed." -msgstr "" -"Aktuellen Thread als ungelesen markieren. Wenn ein Thread-Bereich festgelegt " -"ist, wird der Bereich anstelle des aktuellen Threads als ungelesen markiert. " -"Falls getaggte Threads vorhanden sind, wird gefragt, wie fortgefahren werden " -"soll." - -#. type: SS -#: doc/tin.1:996 -#, no-wrap -msgid "THREAD LISTING COMMANDS" -msgstr "BEFEHLE ZUM AUFLISTEN VON THREADS" - -#. type: Plain text -#: doc/tin.1:1001 -msgid "Select article 4 within thread." -msgstr "Artikel 4 aus dem Thread auswählen." - -#. type: TP -#: doc/tin.1:1035 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1038 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1041 -msgid "Toggle selection of current article." -msgstr "Auswahl des aktuellen Artikels umkehren." - -#. type: TP -#: doc/tin.1:1041 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1044 -msgid "Reverse article selections." -msgstr "Artikelauswahl invertieren." - -#. type: TP -#: doc/tin.1:1044 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1047 -msgid "Undo all selections on current thread." -msgstr "Alle Markierungen im aktuellen Thread rückgängig machen." - -#. type: TP -#: doc/tin.1:1052 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:1055 -msgid "Read current article within thread." -msgstr "Aktuellen Artikel im Thread lesen." - -#. type: TP -#: doc/tin.1:1055 -#, no-wrap -msgid "BTABE'>" -msgstr "BTABE'>" - -#. type: Plain text -#: doc/tin.1:1058 -msgid "View next unread article within thread." -msgstr "Nächsten ungelesenen Artikel im Thread anzeigen." - -#. type: Plain text -#: doc/tin.1:1063 -msgid "" -"Author forward search. This searches for articles with a specific ''From:'' " -"line. The search will wrap over into the next thread if nothing is found in " -"the current one." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1074 -msgid "" -"Mark thread as read [after confirmation] and return to the group index " -"page. Move cursor to next thread." -msgstr "" -"Thread [nach Bestätigung] als gelesen markieren und zur Gruppenindexseite " -"zurückkehren." - -#. type: Plain text -#: doc/tin.1:1078 -msgid "" -"Mark thread as read [after confirmation] and enter the next thread " -"containing unread news." -msgstr "" -"Thread [nach Bestätigung] als gelesen markieren und zum nächsten Thread mit " -"ungelesenen Nachrichten wechseln." - -#. type: TP -#: doc/tin.1:1078 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1082 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1090 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1093 doc/tin.1:1322 -msgid "" -"Post a followup to the current article with a copy of the article included." -msgstr "" -"Veröffentlicht ein Follow-up zum aktuellen Artikel mit einer Kopie des " -"Artikels." - -#. type: TP -#: doc/tin.1:1093 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1096 -msgid "" -"Post a followup to the current article without a copy of the article " -"included." -msgstr "" -"Veröffentlicht ein Follow-up zum aktuellen Artikel ohne eine Kopie des " -"Artikels." - -#. type: Plain text -#: doc/tin.1:1099 doc/tin.1:1335 -msgid "Display the subject of the current article in the last line." -msgstr "Subject des geöffneten Artikels in der untersten Zeile anzeigen." - -#. type: TP -#: doc/tin.1:1105 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1111 -msgid "" -"Mark article as read and move onto the next unread article. If a range of " -"articles is set, the range will be marked as read instead of the current " -"article. When tagged articles are present, a prompt asks how to proceed." -msgstr "" - -#. type: TP -#: doc/tin.1:1115 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1135 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1140 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1143 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1147 doc/tin.1:1403 -msgid "" -"Toggle tag status of current article for mailing, piping, printing, saving " -"or reposting." -msgstr "" -"Tag-Status des aktuellen Artikels zum Versenden, Weiterleiten, Drucken, " -"Speichern oder erneuten Veröffentlichen umschalten." - -#. type: TP -#: doc/tin.1:1147 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1151 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1154 -msgid "Untag all tagged threads." -msgstr "Markierung aller markierten Threads entfernen." - -#. type: Plain text -#: doc/tin.1:1166 -msgid "" -"Mark current article in thread as unread. If a range of articles is set, the " -"range will be marked as unread instead of the current article. When tagged " -"articles are present, a prompt asks how to proceed." -msgstr "" - -#. ------------------------------------------------------------------- -#. type: Plain text -#: doc/tin.1:1171 -msgid "Mark all articles in thread as unread." -msgstr "Alle Artikel im aktuellen Thread als ungelesen markieren." - -#. type: SS -#: doc/tin.1:1171 -#, no-wrap -msgid "ARTICLE VIEWER COMMANDS" -msgstr "BEFEHLE ZUM ANZEIGEN VON ARTIKELN" - -#. type: Plain text -#: doc/tin.1:1176 -msgid "Read the first (base) article in this thread." -msgstr "Den ersten (Basis) Artikel in diesem Thread lesen." - -#. type: Plain text -#: doc/tin.1:1179 -msgid "Read response 4 in this thread." -msgstr "Antwort 4 im diesem Thread lesen." - -#. type: TP -#: doc/tin.1:1183 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1187 -msgid "" -"Reply through mail to the author of the current article with a copy of the " -"article with all headers included." -msgstr "" -"Dem Autor des aktuellen Artikels per E-Mail mit einer Kopie des Artikels " -"einschließlich aller Header anworten." - -#. type: TP -#: doc/tin.1:1187 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1195 -msgid "" -"Perform B<\\%pgp>(1) / B<\\%gpg>(1) operations on article. This expects " -"inline pgp (B) and not MIME pgp (B)." -msgstr "" -"B<\\%pgp>(1) / B<\\%gpg>(1)-Operationen für den Artikel ausführen. Es muß " -"Inline-PGP (B) und nicht MIME-PGP (B) vorliegen." - -#. type: TP -#: doc/tin.1:1195 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1198 -msgid "Toggles the display mode (raw including all headers vs. cooked)." -msgstr "" -"Schaltet den Anzeigemodus um (Roh einschließlich aller Header zu " -"Aufbereitet)." - -#. type: TP -#: doc/tin.1:1202 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1205 -msgid "Toggle the TAB width between 4 and 8 characters." -msgstr "Tabulatorbreite zwischen 4 und 8 Zeichen Umschalten." - -#. type: TP -#: doc/tin.1:1205 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1209 -msgid "" -"Post a followup to the current article with a copy of the article with all " -"headers included." -msgstr "" -"Follow-up zum aktuellen Artikel mit einer Kopie des Artikels einschließlich " -"aller Header veröffentlichen." - -#. type: TP -#: doc/tin.1:1209 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1213 -msgid "" -"Toggle TeX to ISO decoding for current article. The default behavior is " -"taken from the B variable in the tinrc file." -msgstr "" -"TeX auf ISO-Dekodierung für aktuellen Artikel umschalten. Das " -"Standardverhalten wird der Variable B aus der tinrc-Datei " -"entnommen." - -#. type: TP -#: doc/tin.1:1213 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1216 -msgid "" -"Toggles the display of all headers vs. headers in B." -msgstr "" -"Schaltet die Anzeige aller Header vs. Header in B " -"um." - -#. type: TP -#: doc/tin.1:1216 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1219 -msgid "Detailed MIME information of the article." -msgstr "Detaillierte MIME-Informationen des Artikels." - -#. type: TP -#: doc/tin.1:1219 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1222 -msgid "Toggle ROT-13 decoding for this article." -msgstr "ROT-13 Entschlüsseln ein-/ausschalten." - -#. type: TP -#: doc/tin.1:1222 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1226 -msgid "" -"Toggle the display of uuencoded sections. The default behavior is taken from " -"the B variable in the tinrc file." -msgstr "" -"Schalten Sie die Anzeige von uuencodierten Abschnitten um. Das " -"Standardverhalten wird durch die Variable B in der tinrc-Datei " -"festgelegt." - -#. type: TP -#: doc/tin.1:1226 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1233 -msgid "" -"The form feed character (^L) is often used to hide 'spoilers' that the " -"reader may not initially wish to see when viewing an article. Any text after " -"a formfeed is not displayed. This key-press acts like a reveal key and turns " -"the hidden text back on. Scrolling down will also reveal the text, scrolling " -"up will hide it again." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1242 -msgid "Forward search the text of this article." -msgstr "Vorwärts innerhalb dieses Artikels suchen." - -#. type: Plain text -#: doc/tin.1:1245 -msgid "Backward search the text of this article." -msgstr "Rückwärts innerhalb dieses Artikels suchen." - -#. type: TP -#: doc/tin.1:1245 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1250 -msgid "" -"Skip to the end of the next quoted text-block in this article. Quoted text " -"is everything which matches B, B or " -"B." -msgstr "" -"Zum Ende des nächsten zitierten Textblocks in diesem Artikel springen. " -"Zitierter Text ist alles, was mit B, B oder " -"B übereinstimmt." - -#. type: TP -#: doc/tin.1:1250 -#, no-wrap -msgid "B'>" -msgstr "B'>" - -#. type: Plain text -#: doc/tin.1:1253 -msgid "Go to the first article in the current thread." -msgstr "Gehe zum ersten Artikel im aktuellen Thread." - -#. type: TP -#: doc/tin.1:1253 -#, no-wrap -msgid "B'>" -msgstr "B'>" - -#. type: Plain text -#: doc/tin.1:1256 -msgid "Go to the last article in the current thread." -msgstr "Gehe zum letzten Artikel im aktuellen Thread." - -#. type: TP -#: doc/tin.1:1256 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1259 -msgid "Toggle word highlighting on/off." -msgstr "Wort-Hervorheben ein-/ausschalten." - -#. type: Plain text -#: doc/tin.1:1273 -msgid "" -"Auto select article(s) with a single key. The defaults used for selection " -"are set based upon the following four tinrc config variables: " -"B, B, " -"B and B Read the " -"section \"GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES\" for a full " -"explanation of these variables and \"FILTERING ARTICLES\" for more " -"information on filtering." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1282 -msgid "" -"Kill article(s) with a single key. The defaults used for killing are based " -"upon the following four tinrc config variables: B, " -"B, B and " -"B. Read the section \"GLOBAL OPTIONS MENU AND " -"TINRC CONFIGURABLE VARIABLES\" for a full explanation of these variables and " -"\"FILTERING ARTICLES\" for more information on filtering." -msgstr "" - -#. type: TP -#: doc/tin.1:1282 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:1285 -msgid "Go to next base article." -msgstr "Zum nächsten Basisartikel springen." - -#. type: TP -#: doc/tin.1:1285 -#, no-wrap -msgid "BTABE'>" -msgstr "BTABE'>" - -#. type: Plain text -#: doc/tin.1:1290 -msgid "" -"Go to next unread article. If the tinrc variable B doesn't " -"contain PageNextUnread, then this key will first page through the current " -"article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1293 -msgid "Author forward search." -msgstr "Suche nach Autor (vorwärts)." - -#. type: Plain text -#: doc/tin.1:1296 -msgid "Author backward search." -msgstr "Suche nach Autor (rückwärts)." - -#. type: Plain text -#: doc/tin.1:1304 -msgid "" -"Mark the current thread as read [after confirmation] and return to the " -"previous menu. Move cursor to next item." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1308 -msgid "" -"Mark the rest of the current thread as read [after confirmation] and enter " -"the next thread with unread articles." -msgstr "" - -#. type: TP -#: doc/tin.1:1308 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1313 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1316 -msgid "" -"Edit the current article. This is restricted to mailgroups and saved news." -msgstr "" -"Aktuellen Artikel bearbeiten. Dies ist auf Mailgroups und gespeicherte " -"Nachrichten beschränkt." - -#. type: TP -#: doc/tin.1:1319 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1322 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1326 -msgid "" -"Post a followup to the current article without including a copy of the " -"article." -msgstr "" -"Veröffentlicht ein Follow-up zum aktuellen Artikel ohne eine Kopie des " -"Artikels." - -#. type: TP -#: doc/tin.1:1326 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1329 -msgid "Go to the start of the article." -msgstr "Zum Anfang des Artikels springen." - -#. type: TP -#: doc/tin.1:1329 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1332 -msgid "Go to the end of the article." -msgstr "Zum Ende des Artikels springen." - -#. type: TP -#: doc/tin.1:1341 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1344 -msgid "Mark rest of thread as read and move onto the next unread thread." -msgstr "" -"Markiere den Rest des Threads als gelesen und springe zu nächstem " -"ungelesenen Thread." - -#. type: TP -#: doc/tin.1:1344 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1347 -msgid "Show the thread menu that the current article is a part of." -msgstr "Zeigt das Thread-Menü an, zu dem der aktuelle Artikel gehört." - -#. type: TP -#: doc/tin.1:1351 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1360 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1363 -msgid "Go to the next article." -msgstr "Gehe zum nächsten Artikel." - -#. type: TP -#: doc/tin.1:1363 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1371 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1374 -msgid "Go to the previous article." -msgstr "Gehe zum vorherigen Artikel." - -#. type: TP -#: doc/tin.1:1374 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1377 -msgid "Go to the previous unread article." -msgstr "Gehe zum vorherigen ungelesenen Artikel." - -#. type: Plain text -#: doc/tin.1:1380 -msgid "Return to the previous level." -msgstr "Kehrt zur vorherigen Ebene zurück." - -#. type: TP -#: doc/tin.1:1383 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1387 -msgid "" -"Reply through mail to the author of the current article with a copy of the " -"article included." -msgstr "" -"Per E-Mail an den Autor des aktuellen Artikels antworten und eine Kopie des " -"Artikels beifügen." - -#. type: TP -#: doc/tin.1:1387 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1391 -msgid "" -"Reply through mail to the author of the current article without including " -"the original article." -msgstr "" -"Per E-Mail an den Autor des aktuellen Artikels antworten ohne eine Kopie des " -"Artikels beizufügen." - -#. type: TP -#: doc/tin.1:1391 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1396 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1399 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:1403 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1406 -msgid "Return to group selection level." -msgstr "Kehrt zur Auswahlebene zurück." - -#. type: TP -#: doc/tin.1:1406 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1409 -msgid "Go to parent article." -msgstr "Gehe zum übergeordneten Artikel." - -#. type: TP -#: doc/tin.1:1409 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1413 -msgid "" -"Display a list of URLs in the current article. See the section \"URL " -"LISTING\" for more information." -msgstr "" -"Eine Liste der URLs im aktuellen Artikel anzeigen. Weitere Informationen " -"finden Sie im Abschnitt \"URL LISTE\"." - -#. type: TP -#: doc/tin.1:1413 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1417 -msgid "" -"Display a list of attachments of the current article. See the section " -"\"ATTACHMENT LISTING\" for more information." -msgstr "" -"Zeigt eine Liste der Anhänge des aktuellen Artikels an. Weitere " -"Informationen finden Sie im Abschnitt \"ANHANGSVERZEICHNIS\"." - -#. type: TP -#: doc/tin.1:1424 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1433 -msgid "Mark article as unread." -msgstr "Alle Artikel als ungelesen markieren." - -#. ------------------------------------------------------------------- -#. type: Plain text -#: doc/tin.1:1438 -msgid "Mark the current thread as unread." -msgstr "Markiere den aktuellen Thread als ungelesen." - -#. type: SS -#: doc/tin.1:1438 -#, no-wrap -msgid "URL LISTING" -msgstr "URL LISTE" - -#. type: Plain text -#: doc/tin.1:1441 -msgid "" -"B ('B') displays a list of URLs in the current article. " -"Besides the common moving keys, the following commands are available:" -msgstr "" -"B ('B') zeigt eine Liste der URLs im aktuellen Artikel an. " -"Neben den üblichen Bewegungstasten stehen folgende Befehle zur Verfügung:" - -#. type: TP -#: doc/tin.1:1442 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:1446 -msgid "" -"The current URL will be prompted and opened using the B. " -"'BESCE>' or no input will skip the URL." -msgstr "" -"Die aktuelle URL wird abgefragt und mit dem B geöffnet. " -"'BESCE>' oder keine Eingabe überspringt die URL." - -#. type: Plain text -#: doc/tin.1:1449 doc/tin.1:1549 -msgid "URL forward search." -msgstr "Suche nach URL (vorwärts)." - -#. type: Plain text -#: doc/tin.1:1452 doc/tin.1:1552 -msgid "URL backward search." -msgstr "Suche nach URL (rückwärts)." - -#. type: Plain text -#: doc/tin.1:1458 doc/tin.1:1512 doc/tin.1:1558 -msgid "Shell escape." -msgstr "Ausgang zur Shell." - -#. type: Plain text -#: doc/tin.1:1461 -msgid "Toggle the display of the current URL in the last line." -msgstr "Anzeige der aktuellen URL in der letzten Zeile (de)aktivieren." - -#. type: Plain text -#: doc/tin.1:1464 doc/tin.1:1519 doc/tin.1:1564 -msgid "Help screen of commands available." -msgstr "Hilfeseite der verfügbaren Befehle." - -#. ------------------------------------------------------------------- -#. type: SS -#: doc/tin.1:1471 -#, no-wrap -msgid "ATTACHMENT LISTING" -msgstr "ANHANGSVERZEICHNIS" - -#. type: Plain text -#: doc/tin.1:1474 -msgid "" -"B ('B') displays a list of attachments of the current " -"article. Besides the common moving keys, the following commands are " -"available:" -msgstr "" -"B ('B') zeigt eine Liste der Anhänge des aktuellen " -"Artikels an. Neben den üblichen Bewegungstasten stehen folgende Befehle zur " -"Verfügung:" - -#. type: TP -#: doc/tin.1:1475 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1478 -msgid "Pipe attachment into command." -msgstr "Anhang an Befehl weiterleiten." - -#. type: TP -#: doc/tin.1:1478 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1481 -msgid "Save current attachment / tagged attachments to disk." -msgstr "Aktuellen Anhang / markierte Anhänge auf speichern." - -#. type: TP -#: doc/tin.1:1481 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:1484 -msgid "View attachment." -msgstr "Multimediaanhänge anzeigen." - -#. type: TP -#: doc/tin.1:1484 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1487 -msgid "Tag one or more attachments for saving." -msgstr "Einen oder mehrere Anhänge zum Speichern markieren." - -#. type: TP -#: doc/tin.1:1487 -#, no-wrap -msgid "B" - -#. type: Plain text -#: doc/tin.1:1491 -msgid "" -"Prompts for a pattern to match. All attachments whose name/description or " -"content type/transfer encoding match the pattern will be tagged." -msgstr "" - -#. type: TP -#: doc/tin.1:1491 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1494 -msgid "Reverse tagging of all attachments." -msgstr "Markierung der Anhänge umkehren." - -#. type: TP -#: doc/tin.1:1494 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1497 -msgid "Untag all tagged attachments." -msgstr "Markierung der markierten Anhängen aufheben." - -#. type: Plain text -#: doc/tin.1:1500 -msgid "Attachment forward search." -msgstr "Vorwärtssuche nach Anhang." - -#. type: Plain text -#: doc/tin.1:1503 -msgid "Attachment backward search." -msgstr "Rückwärtssuche nach Anhang." - -#. type: TP -#: doc/tin.1:1506 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1509 -msgid "" -"Pipe attachment into command. Uses the raw attachment, no decoding is done." -msgstr "" -"Pipe Anhang an den Befehl. Verwendet den rohen Anhang, es wird keine " -"Dekodierung vorgenommen." - -#. type: Plain text -#: doc/tin.1:1516 -msgid "" -"Toggle the display of the name/description of the current attachment in the " -"last line." -msgstr "Name oder Beschreibung des Anhangs in der untersten Zeile anzeigen." - -#. ------------------------------------------------------------------- -#. type: SS -#: doc/tin.1:1526 -#, no-wrap -msgid "POSTING HISTORY LISTING" -msgstr "POSTING VERLAUFSLISTE" - -#. type: Plain text -#: doc/tin.1:1534 -msgid "" -"B ('B') displays a list of all previous posted articles " -"stored in I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>. The following " -"information is shown: a time stamp in \"dd-mm-yy\"-format, a single letter " -"indicating the action which initiated the message, the group names " -"(eventually shortened, see also B) or a mail address " -"the message was sent to and the subject of the message. Besides the common " -"moving keys, the following commands are available:" -msgstr "" - -#. type: TP -#: doc/tin.1:1535 -#, no-wrap -msgid "BCRE'>" -msgstr "BCRE'>" - -#. type: Plain text -#: doc/tin.1:1546 -msgid "" -"The article with the current ''Message-ID:'' will be opened if available. " -"Note that this requires that the ''Message-ID:'' of the article was recorded " -"in I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted> which may not always be the " -"case. If using NNTP and the internal inews (B set to \"--" -"internal\") and either the server proposes a ''Message-ID:'' during the " -"POST (B) command or B is built to generate ''Message-ID:'' " -"this should be the case. With an external inews (and reading from local " -"spool) it is not." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1561 -msgid "Toggle the display of the current ''Message-ID:'' in the last line." -msgstr "" -"Umschalten der Anzeige der aktuellen ''Message-ID:'' in der letzten Zeile." - -#. ------------------------------------------------------------------- -#. type: SS -#: doc/tin.1:1571 -#, no-wrap -msgid "GLOBAL OPTIONS MENU AND TINRC CONFIGURABLE VARIABLES" -msgstr "MENÜ DER GLOBALE OPTIONEN UND KONFIGURIERBAREN TINRC-VARIABLEN" - -#. FIXME - add missing descriptions -#. - \fI${TIN_LIBDIR:\-NEWSLIBDIR}/tinrc\fR is used -#. in the !TIN_DEFAULTS_DIR config case -#. type: Plain text -#: doc/tin.1:1583 -msgid "" -"At startup, B reads in the configuration files (see also B<\\" -"%tin>(5)). They contain a list of variables that can be used to configure " -"the way B works. If it exists, the global configuration file, I is read. After that, the user's own configuration file is read " -"from I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>. The global file is useful for " -"distributing system-wide defaults to new users who have no private tinrc yet." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1591 -msgid "" -"The variables are user configurable by editing I<${TIN_HOMEDIR:-\"$HOME\"}/." -"tin/tinrc> directly. Most of them can also be set in the GLOBAL OPTIONS MENU " -"which is accessed by pressing B ('B') at all levels. It " -"allows the user to customize the behavior of B. The options are saved " -"to the file I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc> when you exit B so " -"don't edit the file directly whilst B is running." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1597 -msgid "" -"In the options menu use the cursor keys in the usual way to move around. Use " -"B ('B<^J>' or 'BCRE>') to 'open' the option you wish " -"to change. You will need to enter a new value or use 'BSPACEE>' to " -"toggle the available options. B will save the new value, " -"\\&'BESCE>' will abort without saving changes." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1604 -msgid "" -"As with the other menus, B ('B<^L>') will redraw the screen. You " -"can use B ('B'), B ('B') and B " -"('B<\\(rs>') to search for a specific option. Use B ('B') to exit " -"the option menu and keep your changes. Use B ('B') to exit " -"without keeping your changes." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1609 -msgid "" -"The options menu provides access to the attributes menu for the current " -"group by the B ('BTABE>') command. Pressing " -"B again toggles back to the options menu. For more " -"information see section \"ATTRIBUTES MENU AND GROUP ATTRIBUTES\"." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1612 -msgid "" -"The B ('B') command brings up the scopes menu. For more " -"information see section \"SCOPES MENU\"." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1616 -msgid "" -"Here is a full list of all the available variables. The name in braces is " -"the name of the corresponding setting in I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"tinrc>." -msgstr "" - -#. type: TP -#: doc/tin.1:1616 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1622 -msgid "" -"If ON abbreviate long newsgroup names at group selection level and article " -"level (if necessary) like this: news.software.readers \\(-E n.software." -"readers \\(-E n.s.readers \\(-E n.s.r. Default is OFF." -msgstr "" -"Falls ON werden, sofern nötig, lange Newsgruppennamen in der Auswahl- und " -"Artikelebene wie folgt abgekürzt: news.software.readers \\(-E n.software." -"readers \\(-E n.s.readers \\(-E n.s.r. Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:1622 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1626 doc/tin.5:1351 -msgid "" -"If ON add posted articles which start a new thread to filter for " -"highlighting follow-ups. Default is ON." -msgstr "" -"Falls ON füge gepostete Artikel die einen neuen Thread einleiten zum Filter " -"hinzu um eventuelle Antworten hervorzuheben. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1626 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1629 doc/tin.5:1354 -msgid "Turn ON advertising in header (''User-Agent:''). Default is ON." -msgstr "Falls ON füge 'User-Agent:'-Kopfzeile ein. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1629 -#, no-wrap -msgid "B" -msgstr "B<Übersp. multipart/alternative-Teile (alternative_handling)>" - -#. type: Plain text -#: doc/tin.1:1632 doc/tin.5:1357 -msgid "" -"If ON strip multipart/alternative messages automatically. Default is ON." -msgstr "" -"Falls ON entsorge multipart/alternative Teile des Artikels automatisch. " -"Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1632 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1635 doc/tin.5:1360 -msgid "The character used to show that an article was deleted. Default is 'D'." -msgstr "" -"Zeichen das anzeigt, dass ein Artikel gelöscht wurde. Voreinstellung ist 'D'." - -#. type: TP -#: doc/tin.1:1635 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1638 doc/tin.5:1363 -msgid "" -"The character used to show that an article is in a range. Default is '#'." -msgstr "" -"Zeichen mit dem angezeigt wird, dass sich ein Artikel in einem Bereich " -"befindet. Voreinstellung ist '#'." - -#. type: TP -#: doc/tin.1:1638 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1642 doc/tin.5:1367 -msgid "" -"The character used to show that an article will return as an unread article " -"when the group is next entered. Default is '-'." -msgstr "" -"Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel als ungelesener " -"Artikel zurückkehrt, wenn die Gruppe das nächste Mal betreten wird. " -"Voreinstellung ist '-'." - -#. type: TP -#: doc/tin.1:1642 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1646 doc/tin.5:1371 -msgid "" -"The character used to show that an article/thread is auto-selected (hot). " -"Default is '*'." -msgstr "" -"Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread " -"automatisch ausgewählt ist (heiß). Voreinstellung ist '*'." - -#. type: TP -#: doc/tin.1:1646 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1650 doc/tin.5:1375 -msgid "" -"The character used to show that an article/thread is recent (not older than " -"X days). See also B. Default is 'o'." -msgstr "" -"Zeichen das verwendet wird, um anzuzeigen, dass ein Artikel/Thread neu ist " -"(nicht älter als X Tage). Siehe auch B. Voreinstellung ist ' o'." - -#. type: TP -#: doc/tin.1:1650 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1654 doc/tin.5:1379 -msgid "" -"The character used to show that an article has not been read. Default is " -"'+'." -msgstr "" -"Zeichen das anzeigt, dass ein Artikel noch nicht gelesen wurde. " -"Voreinstellung ist '+'." - -#. type: TP -#: doc/tin.1:1654 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1657 doc/tin.5:1382 -msgid "The character used to show that an article was read. Default is ' '." -msgstr "" -"Zeichen das anzeigt, dass ein Artikel schon gelesen wurde. Voreinstellung " -"ist ' '." - -#. type: TP -#: doc/tin.1:1657 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1661 doc/tin.5:1386 -msgid "" -"The character used to show that an article was killed. Default is 'K'. " -"B must be set accordingly." -msgstr "" -"Zeichen das anzeigt, dass ein Artikel gekillt wurde. Voreinstellung ist 'K'. " -"B muss passend gesetzt sein." - -#. type: TP -#: doc/tin.1:1661 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1665 doc/tin.5:1390 -msgid "" -"The character used to show that an article was hot before it was read. " -"Default is ':'. B must be set accordingly." -msgstr "" -"Zeichen, das verwendet wird, um anzuzeigen, dass ein Artikel automatisch " -"ausgewählt (heiß) war, bevor er gelesen wurde. Standard ist ':'. " -"B muss entsprechend eingestellt werden." - -#. type: TP -#: doc/tin.1:1665 doc/tin.5:1390 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1670 -msgid "" -"If ON B will ask before using a MIME viewer (B) to " -"display MIME messages. This only occurs if a MIME viewer is set. Default is " -"OFF." -msgstr "" -"Falls ON, fragt B, bevor ein MIME-Viewer (B) zum " -"Anzeigen von MIME-Nachrichten verwendet wird. Dies geschieht nur, wenn ein " -"MIME-Viewer festgelegt ist. Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:1670 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1675 -msgid "" -"Format string B uses for Attachment level representation. See the " -"section \"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%t%s%e%c%d\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung der Anhangsebene " -"benutzt. Für weitere Informationen sei auf den Abschnitt \"ANSICHTEN " -"ANPASSEN\" verwiesen. Voreingestellt ist \"%t%s%e%c%d\"." - -#. type: TP -#: doc/tin.1:1675 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1679 doc/tin.5:1407 -msgid "" -"Automatically put your name in the ''Cc:'' and/or ''Bcc:'' field when " -"mailing an article. Default is No." -msgstr "" -"Setzt Ihren Namen automatisch in das Feld ''Cc:'' und/oder ''Bcc:'', wenn " -"Sie einen Artikel versenden. Die Voreinstellung ist Nein." - -#. type: TP -#: doc/tin.1:1679 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1683 doc/tin.5:1411 -msgid "" -"If ON automatically list thread when entering it using right arrow key. " -"Default is ON." -msgstr "" -"Falls ON: Thread beim Betreten mit der rechten Cursortaste automatisch " -"anzeigen? Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1683 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1686 doc/tin.1:2736 -msgid "Default is OFF." -msgstr "Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:1686 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1691 doc/tin.5:1419 -msgid "" -"If set ON articles/threads will be saved in batch mode when save \\&''B<-" -"S>'' or mail ''B<-M>, B<-N>'' is specified on the command line. Default is " -"ON." -msgstr "" -"Falls ON werden Artikel/Threads im Batchmode gespeichert wenn ''B<-S>'' oder " -"gemailt, wenn ''B<-M>'' bzw. ''B<-N>'' in der Kommandozeile angegeben wurde. " -"Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1691 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1696 doc/tin.5:1424 -msgid "" -"If set ON a mini menu of the most useful commands will be displayed at the " -"bottom of the screen for each level. Also a short posting etiquette will be " -"displayed after composing an article. Default is ON." -msgstr "" -"Falls diese Funktion eingeschaltet ist (ON), wird am unteren Bildschirmrand " -"für jede Ebene ein Mini-Menü mit den nützlichsten Befehlen angezeigt. " -"Außerdem wird nach dem Verfassen eines Artikels ein kurzer Posting-Knigge " -"angezeigt. Standard ist ON." - -#. type: TP -#: doc/tin.1:1696 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1701 -msgid "" -"If ON, create local copies of NNTP overview files. This can be used to " -"considerably speed up accessing large groups when using a slow connection. " -"See also \"INDEX FILES\". Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:1701 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:1706 doc/tin.5:1434 -msgid "" -"If ON, locally cached NNTP overview files (B) are " -"saved in compressed form (B). Useful to reduce local disk space " -"used. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:1706 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1713 -msgid "" -"Use this hash algorithm for cancel-locks. Only available when built with " -"cancel-lock support. none disables the generation of cancel-locks. Valid " -"values are none, sha1, sha256 and sha512. Default is sha1. See also " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret> in B<\\%tin>(5)." -msgstr "" -"Diesen Hash-Algorithmus für Cancel-Locks verwenden. Nur vorhanden falls " -"B mit Cancel-Lock-Unterstützung gebaut wurde. Keiner deaktiviert die " -"Erzeugung von Cancel-Locks. Gültige Werte sind Keiner, sha1, sha256 und " -"sha512. Voreinstellung ist sha1. Siehe auch I<${TIN_HOMEDIR:-\"$HOME\"}/." -"cancelsecret> in B<\\%tin>(5)." - -#. type: TP -#: doc/tin.1:1713 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1719 doc/tin.5:1444 -msgid "" -"If set ON the user is asked when quitting if all groups read during the " -"current session should be marked read. Default is OFF." -msgstr "" -"Falls auf ON gestellt, wird der Benutzer beim Beenden gefragt, ob alle " -"während der aktuellen Sitzung gelesenen Gruppen als gelesen markiert werden " -"sollen. Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:1719 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1722 doc/tin.5:1447 -msgid "Standard background color" -msgstr "Standard Hintergrundfarbe" - -#. type: TP -#: doc/tin.1:1722 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1725 doc/tin.5:1450 -msgid "Color of quoted text from external sources" -msgstr "Farbe des Fremdzitat-Textes" - -#. type: TP -#: doc/tin.1:1725 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1728 doc/tin.5:1453 -msgid "Color of sender (From:)" -msgstr "Farbe des Autors (From:)" - -#. type: TP -#: doc/tin.1:1728 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1731 doc/tin.5:1456 -msgid "Color of header-lines" -msgstr "Farbe der Artikelheaderzeilen" - -#. type: TP -#: doc/tin.1:1731 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1734 doc/tin.5:1459 -msgid "Color of help pages" -msgstr "Farbe des Hilfstext" - -#. type: TP -#: doc/tin.1:1734 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1737 doc/tin.5:1462 -msgid "Color of background for inverse text" -msgstr "Hintergrundfarbe für inversen Text" - -#. type: TP -#: doc/tin.1:1737 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1740 doc/tin.5:1465 -msgid "Color of foreground for inverse text" -msgstr "Vordergrundfarbe für inversen Text" - -#. type: TP -#: doc/tin.1:1740 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1743 doc/tin.5:1484 -msgid "Color of status messages in last line" -msgstr "Farbe der Statusmeldungen in der letzten Zeile" - -#. type: TP -#: doc/tin.1:1743 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1747 doc/tin.5:1469 -msgid "" -"Color of words emphasized like _this_. See also B and " -"B." -msgstr "" -"Farbe der hervorgehobenen Wörter wie _hier_. Siehe auch " -"B und B." - -#. type: TP -#: doc/tin.1:1747 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1751 doc/tin.5:1473 -msgid "" -"Color of words emphasized like /this/. See also B and " -"B." -msgstr "" -"Farbe der hervorgehobenen Wörter wie /hier/. Siehe auch " -"B und B." - -#. type: TP -#: doc/tin.1:1751 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1755 doc/tin.5:1477 -msgid "" -"Color of words emphasized like *this*. See also B and " -"B." -msgstr "" -"Farbe der hervorgehobenen Wörter wie *hier*. Siehe auch " -"B und B." - -#. type: TP -#: doc/tin.1:1755 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1759 doc/tin.5:1481 -msgid "" -"Color of words emphasized like -this-. See also B and " -"B." -msgstr "" -"Farbe der hervorgehobenen Wörter wie -hier-. Siehe auch " -"B und B." - -#. type: TP -#: doc/tin.1:1759 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1762 doc/tin.5:1487 -msgid "Color of mini help menu" -msgstr "Farbe des Minihilfemenü" - -#. type: TP -#: doc/tin.1:1762 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1765 doc/tin.5:1490 -msgid "Color of actual news header fields" -msgstr "Farbe des angezeigten Headers" - -#. type: TP -#: doc/tin.1:1765 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1768 doc/tin.5:1493 -msgid "Standard foreground color" -msgstr "Standard Vordergrundfarbe" - -#. type: TP -#: doc/tin.1:1768 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1771 doc/tin.5:1496 -msgid "Color of quoted lines" -msgstr "Farbe der zitierten Zeilen" - -#. type: TP -#: doc/tin.1:1771 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1774 doc/tin.5:1499 -msgid "Color of twice quoted lines" -msgstr "Farbe von zweifach zitierten Zeilen" - -#. type: TP -#: doc/tin.1:1774 -#, no-wrap -msgid "B3 times quoted line (col_quote3)>" -msgstr "B3-fach zitierten Zeilen (col_quote3)>" - -#. type: Plain text -#: doc/tin.1:1777 doc/tin.5:1502 -msgid "Color of E=3 times quoted lines" -msgstr "Farbe von =E3-fach zitierten Zeilen" - -#. type: TP -#: doc/tin.1:1777 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1781 doc/tin.5:1506 -msgid "" -"Color of response counter. This is the text that says \"Response x of y\" in " -"the article viewer." -msgstr "" -"Farbe des Antwortzählers. Das ist der Text \"Antwort x von y\" im Artikel-" -"Viewer." - -#. type: TP -#: doc/tin.1:1781 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1784 doc/tin.5:1509 -msgid "Color of signatures" -msgstr "Farbe von Signaturen" - -#. type: TP -#: doc/tin.1:1784 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1787 doc/tin.5:1512 -msgid "Color of negative score" -msgstr "Farbe negativer Bewertung" - -#. type: TP -#: doc/tin.1:1787 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1790 doc/tin.5:1515 -msgid "Color of positive score" -msgstr "Farbe positiver Bewertung" - -#. type: TP -#: doc/tin.1:1790 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1793 doc/tin.5:1518 -msgid "Color of urls highlight" -msgstr "Farbe der hervorgehobenen URLs" - -#. type: TP -#: doc/tin.1:1793 -#, no-wrap -msgid "B" -msgstr "B" - -# -#. type: Plain text -#: doc/tin.1:1796 doc/tin.5:1521 -msgid "Color of verbatim blocks" -msgstr "Farbe des wortgetreu darzustellenden Textes" - -#. type: TP -#: doc/tin.1:1796 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1799 doc/tin.5:1524 -msgid "Color of article subject" -msgstr "Farbe der Subjectzeile" - -#. type: TP -#: doc/tin.1:1799 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1802 doc/tin.5:1527 -msgid "Color of text-lines" -msgstr "Farbe der Textzeilen" - -#. type: TP -#: doc/tin.1:1802 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1805 doc/tin.5:1530 -msgid "Color of help/mail sign" -msgstr "Farbe des Hilfe/Mail-Zeichens" - -#. type: TP -#: doc/tin.1:1805 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1808 -msgid "Ask for manual confirmation to protect the user." -msgstr "Vorsichtshalber um Bestätigung bitten." - -#. type: IP -#: doc/tin.1:1809 doc/tin.1:1815 doc/tin.1:1819 -#, no-wrap -msgid "\\(bu" -msgstr "\\(bu" - -#. TODO: check if all affected commands are marked [after confirmation] -#. type: Plain text -#: doc/tin.1:1815 -msgid "" -"B Ask for confirmation before executing certain dangerous commands " -"(e.g., B ('B')). Commands that this affects are marked in this " -"manual with '[after confirmation]'. Default is commands & quit." -msgstr "" - -#. type: Plain text -#: doc/tin.1:1819 -msgid "" -"B You'll be asked to confirm that you wish to exit B when you use " -"the B ('B') command." -msgstr "" -"B Sie werden aufgefordert, zu bestätigen, dass Sie B beenden " -"möchten, wenn Sie den Befehl B ('B') verwenden." - -#. type: Plain text -#: doc/tin.1:1823 -msgid "" -"B Bitten Sie um Bestätigung, bevor Sie alle nicht ausgewählten " -"Artikel (mit dem Befehl B ('B')) als gelesen " -"markieren." - -#. type: TP -#: doc/tin.1:1824 -#, no-wrap -msgid "B" -msgstr "B" - -# -#. most of these default_* settings are not available from the menu -#. as they are intended for internal use only. -#. type: Plain text -#: doc/tin.1:1836 -msgid "" -"Format string B uses for date representation. A description of the " -"different format options can be found at B<\\%strftime>(3). B uses B<\\" -"%strftime>(3) when available and supports most format options in his " -"fallback code. Default is \"%a, %d %b %Y %H:%M:%S\"." -msgstr "" - -#. type: TP -#: doc/tin.1:1836 -#, no-wrap -msgid "B<(default_art_search)>" -msgstr "B<(default_art_search)>" - -#. type: TP -#: doc/tin.1:1838 -#, no-wrap -msgid "B<(default_author_search)>" -msgstr "B<(default_author_search)>" - -#. type: TP -#: doc/tin.1:1840 -#, no-wrap -msgid "B<(default_config_search)>" -msgstr "B<(default_config_search)>" - -#. type: Plain text -#: doc/tin.1:1843 doc/tin.5:1569 -msgid "The last article/author/config option that was searched for." -msgstr "Der letzte Artikel/Autor/Konfigurationsoption, nach dem gesucht wurde." - -#. type: TP -#: doc/tin.1:1843 -#, no-wrap -msgid "B<(default_filter_days)>" -msgstr "B<(default_filter_days)>" - -#. type: Plain text -#: doc/tin.1:1846 doc/tin.5:1572 -msgid "Default is 28." -msgstr "Voreinstellung ist 28." - -#. type: TP -#: doc/tin.1:1846 -#, no-wrap -msgid "B<(default_filter_kill_case)>" -msgstr "B<(default_filter_kill_case)>" - -#. type: Plain text -#: doc/tin.1:1850 doc/tin.5:1576 -msgid "" -"Default for quick (1 key) kill filter case. ON = filter case sensitive, OFF " -"= ignore case. Default is OFF." -msgstr "" -"Standard für schnellen (1 Taste) Kill-Filter. ON = Groß-/Kleinschreibung " -"berücksichtigen, OFF = Groß-/Kleinschreibung ignorieren." - -#. type: TP -#: doc/tin.1:1850 -#, no-wrap -msgid "B<(default_filter_kill_expire)>" -msgstr "B<(default_filter_kill_expire)>" - -#. type: Plain text -#: doc/tin.1:1855 doc/tin.5:1581 -msgid "" -"Default for quick (1 key) kill filter expire. ON = limit to " -"B, OFF = don't ever expire. Default is OFF." -msgstr "" -"Standard für schnellen (1-Taste) Kill-Filter-Ablauf. ON = auf " -"B begrenzen, OFF = niemals ablaufen. Standard ist OFF." - -#. type: TP -#: doc/tin.1:1855 -#, no-wrap -msgid "B<(default_filter_kill_global)>" -msgstr "B<(default_filter_kill_global)>" - -#. type: Plain text -#: doc/tin.1:1859 doc/tin.5:1585 -msgid "" -"Default for quick (1 key) kill filter global. ON=apply to all groups, " -"OFF=apply to current group. Default is ON." -msgstr "" -"Standard für schnellen (1-Taste) Kill-Filter global. ON = auf alle Gruppen " -"anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON." - -#. type: TP -#: doc/tin.1:1859 -#, no-wrap -msgid "B<(default_filter_kill_header)>" -msgstr "B<(default_filter_kill_header)>" - -#. type: Plain text -#: doc/tin.1:1862 doc/tin.5:1588 -msgid "Default for quick (1 key) kill filter header." -msgstr "Voreinstellung für Schnell (1 Tasten) Killfilter Header." - -#. type: IP -#: doc/tin.1:1863 doc/tin.1:1897 doc/tin.1:2044 doc/tin.1:2250 doc/tin.1:2310 -#: doc/tin.1:2430 doc/tin.1:2455 doc/tin.1:2471 doc/tin.1:2523 doc/tin.1:2553 -#: doc/tin.1:2631 doc/tin.1:2663 doc/tin.1:2688 doc/tin.1:2794 doc/tin.5:1780 -#: doc/tin.5:1980 doc/tin.5:2044 doc/tin.5:2096 doc/tin.5:2197 doc/tin.5:2212 -#: doc/tin.5:2245 doc/tin.5:2298 doc/tin.5:2327 doc/tin.5:2398 doc/tin.5:2447 -#: doc/tin.5:2474 doc/tin.5:2589 -#, no-wrap -msgid "0" -msgstr "0" - -#. type: Plain text -#: doc/tin.1:1865 doc/tin.1:1899 -msgid "\\%''Subject:'' (case sensitive)" -msgstr "\\%''Subject:'' (Groß/Kleinschreibung beachten)" - -#. type: IP -#: doc/tin.1:1865 doc/tin.1:1899 doc/tin.1:2050 doc/tin.1:2252 doc/tin.1:2312 -#: doc/tin.1:2432 doc/tin.1:2459 doc/tin.1:2473 doc/tin.1:2525 doc/tin.1:2555 -#: doc/tin.1:2633 doc/tin.1:2665 doc/tin.1:2690 doc/tin.1:2796 doc/tin.5:1787 -#: doc/tin.5:1982 doc/tin.5:2046 doc/tin.5:2098 doc/tin.5:2201 doc/tin.5:2214 -#: doc/tin.5:2247 doc/tin.5:2300 doc/tin.5:2329 doc/tin.5:2400 doc/tin.5:2449 -#: doc/tin.5:2476 doc/tin.5:2591 -#, no-wrap -msgid "1" -msgstr "1" - -#. type: Plain text -#: doc/tin.1:1867 doc/tin.1:1901 -msgid "\\%''Subject:'' (ignore case)" -msgstr "\\%''Subject:'' (Groß/Kleinschreibung ignorieren)" - -#. type: IP -#: doc/tin.1:1867 doc/tin.1:1901 doc/tin.1:2055 doc/tin.1:2254 doc/tin.1:2316 -#: doc/tin.1:2435 doc/tin.1:2475 doc/tin.1:2527 doc/tin.1:2558 doc/tin.1:2635 -#: doc/tin.1:2667 doc/tin.1:2692 doc/tin.1:2798 doc/tin.5:1792 doc/tin.5:1984 -#: doc/tin.5:2050 doc/tin.5:2102 doc/tin.5:2217 doc/tin.5:2249 doc/tin.5:2302 -#: doc/tin.5:2332 doc/tin.5:2402 doc/tin.5:2451 doc/tin.5:2478 doc/tin.5:2593 -#, no-wrap -msgid "2" -msgstr "2" - -#. type: Plain text -#: doc/tin.1:1869 doc/tin.1:1903 -msgid "\\%''From:'' (case sensitive)" -msgstr "\\%''From:'' (Groß/Kleinschreibung beachten)" - -#. type: IP -#: doc/tin.1:1869 doc/tin.1:1903 doc/tin.1:2256 doc/tin.1:2438 doc/tin.1:2478 -#: doc/tin.1:2529 doc/tin.1:2560 doc/tin.1:2637 doc/tin.1:2694 doc/tin.5:1986 -#: doc/tin.5:2220 doc/tin.5:2252 doc/tin.5:2304 doc/tin.5:2334 doc/tin.5:2404 -#: doc/tin.5:2480 -#, no-wrap -msgid "3" -msgstr "3" - -#. type: Plain text -#: doc/tin.1:1871 doc/tin.1:1905 -msgid "\\%''From:'' (ignore case)" -msgstr "\\%''From:'' (Groß/Kleinschreibung ignorieren)" - -#. type: IP -#: doc/tin.1:1871 doc/tin.1:1905 doc/tin.1:2258 doc/tin.1:2531 doc/tin.1:2562 -#: doc/tin.1:2640 doc/tin.1:2696 doc/tin.5:1988 doc/tin.5:2108 doc/tin.5:2306 -#: doc/tin.5:2336 doc/tin.5:2406 doc/tin.5:2482 -#, no-wrap -msgid "4" -msgstr "4" - -#. type: Plain text -#: doc/tin.1:1873 doc/tin.1:1907 -msgid "\\%''Message-ID:'' & full ''References:'' line" -msgstr "\\%''Message-ID:'' & alle ''References:'' Einträge" - -#. type: IP -#: doc/tin.1:1873 doc/tin.1:1907 doc/tin.1:2260 doc/tin.1:2533 doc/tin.1:2642 -#: doc/tin.1:2699 doc/tin.5:1990 doc/tin.5:2308 doc/tin.5:2408 doc/tin.5:2485 -#, no-wrap -msgid "5" -msgstr "5" - -#. type: Plain text -#: doc/tin.1:1875 doc/tin.1:1909 -msgid "\\%''Message-ID:'' & last ''References:'' entry only" -msgstr "\\%''Message-ID:'' & letzter ''References:'' Eintrag" - -#. type: IP -#: doc/tin.1:1875 doc/tin.1:1909 doc/tin.1:2535 doc/tin.1:2701 doc/tin.5:2310 -#: doc/tin.5:2487 -#, no-wrap -msgid "6" -msgstr "6" - -#. type: Plain text -#: doc/tin.1:1877 doc/tin.1:1911 -msgid "\\%''Message-ID:'' entry only" -msgstr "\\%''Message-ID:'' allein" - -#. type: IP -#: doc/tin.1:1877 doc/tin.1:1911 doc/tin.1:2538 doc/tin.1:2703 doc/tin.5:2313 -#: doc/tin.5:2489 -#, no-wrap -msgid "7" -msgstr "7" - -#. type: Plain text -#: doc/tin.1:1879 doc/tin.1:1913 -msgid "\\%''Lines:''" -msgstr "\\%''Lines:''" - -#. type: TP -#: doc/tin.1:1880 -#, no-wrap -msgid "B<(default_filter_select_case)>" -msgstr "B<(default_filter_select_case)>" - -#. type: Plain text -#: doc/tin.1:1884 doc/tin.5:1605 -msgid "" -"Default for quick (1 key) auto-selection filter case. ON=filter case " -"sensitive, OFF=ignore case. Default is OFF." -msgstr "" -"Standard für den schnellen (1 Taste) automatischen Auswahlfilter. EIN = " -"Groß-/Kleinschreibung berücksichtigen, AUS = Groß-/Kleinschreibung " -"ignorieren." - -#. type: TP -#: doc/tin.1:1884 -#, no-wrap -msgid "B<(default_filter_select_expire)>" -msgstr "B<(default_filter_select_expire)>" - -#. type: Plain text -#: doc/tin.1:1889 doc/tin.5:1610 -msgid "" -"Default for quick (1 key) auto-selection filter expire. ON = limit to " -"B, OFF = don't ever expire. Default is OFF." -msgstr "" -"Standard für schnellen (1-Taste) Auto-Auswahlfilter-Ablauf. ON = auf " -"B begrenzen, OFF = niemals ablaufen. Standard ist OFF." - -#. type: TP -#: doc/tin.1:1889 -#, no-wrap -msgid "B<(default_filter_select_global)>" -msgstr "B<(default_filter_select_global)>" - -#. type: Plain text -#: doc/tin.1:1893 doc/tin.5:1614 -msgid "" -"Default for quick (1 key) auto-selection filter global. ON=apply to all " -"groups, OFF=apply to current group. Default is ON." -msgstr "" -"Standard für schnellen (1-Taste) Auto-Auswahlfilter global. ON = auf alle " -"Gruppen anwenden, OFF = auf die aktuelle Gruppe anwenden. Standard ist ON." - -#. type: TP -#: doc/tin.1:1893 -#, no-wrap -msgid "B<(default_filter_select_header)>" -msgstr "B<(default_filter_select_header)>" - -#. type: Plain text -#: doc/tin.1:1896 doc/tin.5:1617 -msgid "Default for quick (1 key) auto-selection filter header." -msgstr "" -"Standardheader für den Filter mit schneller automatischer Auswahl (1 Taste)." - -#. type: TP -#: doc/tin.1:1914 -#, no-wrap -msgid "B<(default_goto_group)>" -msgstr "B<(default_goto_group)>" - -#. type: TP -#: doc/tin.1:1916 -#, no-wrap -msgid "B<(default_group_search)>" -msgstr "B<(default_group_search)>" - -#. type: TP -#: doc/tin.1:1918 -#, no-wrap -msgid "B<(default_mail_address)>" -msgstr "B<(default_mail_address)>" - -#. type: TP -#: doc/tin.1:1920 -#, no-wrap -msgid "B<(default_move_group)>" -msgstr "B<(default_move_group)>" - -#. type: TP -#: doc/tin.1:1922 -#, no-wrap -msgid "B<(default_pattern)>" -msgstr "B<(default_pattern)>" - -#. type: TP -#: doc/tin.1:1924 -#, no-wrap -msgid "B<(default_pipe_command)>" -msgstr "B<(default_pipe_command)>" - -#. type: TP -#: doc/tin.1:1926 -#, no-wrap -msgid "B<(default_post_newsgroups)>" -msgstr "B<(default_post_newsgroups)>" - -#. type: TP -#: doc/tin.1:1928 -#, no-wrap -msgid "B<(default_post_subject)>" -msgstr "B<(default_post_subject)>" - -#. type: TP -#: doc/tin.1:1930 -#, no-wrap -msgid "B<(default_range_group)>" -msgstr "B<(default_range_group)>" - -#. type: TP -#: doc/tin.1:1932 -#, no-wrap -msgid "B<(default_range_select)>" -msgstr "B<(default_range_select)>" - -#. type: TP -#: doc/tin.1:1934 -#, no-wrap -msgid "B<(default_range_thread)>" -msgstr "B<(default_range_thread)>" - -#. type: TP -#: doc/tin.1:1936 -#, no-wrap -msgid "B<(default_repost_group)>" -msgstr "B<(default_repost_group)>" - -#. type: TP -#: doc/tin.1:1938 -#, no-wrap -msgid "B<(default_save_file)>" -msgstr "B<(default_save_file)>" - -#. type: TP -#: doc/tin.1:1940 -#, no-wrap -msgid "B<(default_save_mode)>" -msgstr "B<(default_save_mode)>" - -#. type: TP -#: doc/tin.1:1942 -#, no-wrap -msgid "B<(default_select_pattern)>" -msgstr "B<(default_select_pattern)>" - -#. type: TP -#: doc/tin.1:1944 -#, no-wrap -msgid "B<(default_shell_command)>" -msgstr "B<(default_shell_command)>" - -#. type: TP -#: doc/tin.1:1946 -#, no-wrap -msgid "B<(default_subject_search)>" -msgstr "B<(default_subject_search)>" - -#. type: TP -#: doc/tin.1:1948 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1952 doc/tin.5:1668 -msgid "" -"Do not break long lines inside a word. This applies to the body except for " -"verbatim blocks. See also B. Default is OFF." -msgstr "" -"Lange Zeilen nicht innerhalb eines Wortes Umrechen. Dies gilt für den " -"Artikelkörper mit Ausnahme von wortgetreuen Blöcken. Siehe auch " -"B. Die Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:1952 -#, no-wrap -msgid "B instead of highlighted bar (draw_arrow)>" -msgstr "B anstatt einer Markierung (draw_arrow)>" - -#. type: Plain text -#: doc/tin.1:1956 -msgid "" -"Allows groups/articles to be selected by an arrow '\\(-E' if set ON or " -"by a highlighted bar if set OFF. Default is OFF." -msgstr "" -"Ermöglicht die Auswahl von Gruppen/Artikeln mit einem Pfeil '\\(-E', " -"wenn aktiviert, oder durch eine hervorgehobene Leiste, wenn deaktiviert. Der " -"Standardwert ist OFF." - -#. type: TP -#: doc/tin.1:1956 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1962 -msgid "" -"The format string used to create the editor start command with parameters. " -"Default is '%E +%N %F' with %E=Editor, %N=Linenumber and %F=Filename (e.g., /" -"bin/vi +7 .article). See also $B and $B under " -"\"ENVIRONMENT\"." -msgstr "" - -#. type: TP -#: doc/tin.1:1962 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1965 doc/tin.5:1682 -msgid "If ON quotes from external sources will be detected. Default is OFF." -msgstr "" -"Falls ON werden Fremdzitate in Artikeln erkannt. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1965 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1970 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching lines are shown in B. If B is blank, " -"then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:1970 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1974 doc/tin.5:1693 -msgid "" -"Specifies whether a screen redraw should always be done after certain " -"external commands. Default is OFF." -msgstr "" -"Legt fest, ob nach bestimmten externen Befehlen immer ein Neuaufbau des " -"Bildschirms durchgeführt werden soll. Standard ist OFF." - -#. type: TP -#: doc/tin.1:1974 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1981 -msgid "" -"If B is E 0 not more than the last B " -"articles/group are fetched from the server. If B is E 0 " -"B will start fetching articles from your first unread minus absolute " -"value of B. Default is 0, which means no limit." -msgstr "" - -#. type: TP -#: doc/tin.1:1981 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1984 doc/tin.5:1717 -msgid "" -"If ON catchup group when leaving with the left arrow key. Default is ON." -msgstr "" -"Falls ON: Catchup (als gelesen markieren) der Gruppe beim Verlassen mit der " -"linken Cursortaste. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:1984 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1988 -msgid "" -"Format string B uses for Group level representation. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%n\\ %m\\ %R\\ %L\\ \\ %s\\ " -"\\ %F\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung der Gruppenebene " -"benutzt. Für weitere Informationen sei auf den Abschnitt \"ANSICHTEN " -"ANPASSEN\" verwiesen. Voreingestellt ist \"%n\\ %m\\ %R\\ %L\\ \\ %s\\ \\ " -"%F\"." - -#. type: TP -#: doc/tin.1:1988 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:1996 -msgid "" -"Which keys B should accept to jump to the next unread article. " -"Possible is any combination of B and B. When " -"B is set B jumps to the next article at the end of the " -"current one. When B is set B jumps immediately to the " -"next article when B ('BTABE>') is pressed. " -"Default is B." -msgstr "" - -#. type: TP -#: doc/tin.1:1996 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2006 doc/tin.5:1747 -msgid "" -"If set to 'No' then raw uuencoded data is displayed. If set to 'Yes' then " -"sections of uuencoded data will be shown with a single tag line showing the " -"size and filename (much the same as a MIME attachment). If set to 'Hide " -"all' then any line that looks like uuencoded data will be folded into a tag " -"line. This is useful when uuencoded data is split across more than one " -"article but can also lead to false positives. This setting can also be " -"toggled in the article viewer. Default is 'No'." -msgstr "" -"Falls auf 'Nein' gesetzt, werden die Rohdaten im uuencoded Format angezeigt. " -"Wenn auf 'Ja' gesetzt, werden Abschnitte von uuencoded Daten mit einer " -"einzigen Tag-Zeile angezeigt, die die Größe und den Dateinamen zeigt " -"(ähnlich wie ein MIME-Anhang). Falls auf 'Alle ausblenden' gesetzt, wird " -"jede Zeile, die wie uuencoded Daten aussieht, in eine Tag-Zeile umgewandelt. " -"Dies ist nützlich, wenn uuencoded Daten über mehr als einen Artikel verteilt " -"sind, kann aber auch zu falschen Positiven führen. Diese Einstellung kann " -"auch im Artikelbetrachter umgeschaltet werden. Der Standardwert ist 'Nein'." - -#. type: TP -#: doc/tin.1:2006 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2013 doc/tin.5:1754 -msgid "" -"Path, name and options of external B<\\%inews>(1). If you are reading via " -"NNTP the default value is \"--internal\" (use built-in NNTP inews), else it " -"is \"inews -h\". The article is passed to B on STDIN via 'E " -"article'." -msgstr "" -"Pfad, Name und Optionen des externen B<\\%inews>(1). Wenn Sie über NNTP " -"lesen, ist der Standardwert \"--internal\" (verwende eingebautes NNTP " -"inews), ansonsten ist es \"inews -h\". Der Artikel wird mittels 'E " -"Artikel' an B via STDIN übergeben." - -#. type: TP -#: doc/tin.1:2013 -#, no-wrap -msgid "B<(info_in_last_line)>" -msgstr "B<(info_in_last_line)>" - -#. type: Plain text -#: doc/tin.1:2020 doc/tin.5:1760 -msgid "" -"If ON, show current group description or article subject in the last line " -"(not in the pager and global menu) \\(em B ('B') " -"toggles setting. This facility is useful as the full width of the screen is " -"available to display long subjects. Default is OFF." -msgstr "" -"Wenn ON, zeigen Sie die aktuelle Gruppenbeschreibung oder den Artikelbereich " -"in der letzten Zeile an (nicht im Pager und im globalen Menü) \\(em " -"B ('B') wechselt die Einstellung. Diese Funktion ist " -"nützlich, da die volle Breite des Bildschirms zur Verfügung steht, um lange " -"Betreffzeilen anzuzeigen. Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:2020 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2027 -msgid "" -"Interactive mailreader: if greater than 0 your mailreader will be invoked " -"earlier for reply so you can use more of its features (e.g., MIME, " -"pgp, ...). 1 means include headers, 2 means don't include headers (old " -"use_mailreader_i=ON option). 0 turns off usage. This option has to suit " -"B. Default is 0." -msgstr "" - -#. TODO: fix menu description -#. mono_mark* currently do allow "Reverse video" even if -#. inverse_okay=FALSE -#. type: TP -#: doc/tin.1:2027 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2034 doc/tin.5:1770 -msgid "" -"If ON use inverse video for page headers and URL highlighting. Default is " -"ON." -msgstr "" -"Falls ON: inverse Darstellung für Header und das Hervorheben von URLs " -"benutzen. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2034 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2039 doc/tin.5:1775 -msgid "" -"If ON keep all failed postings in I<${TIN_HOMEDIR:-\"$HOME\"}/dead.articles> " -"besides keeping the last failed posting in I<${TIN_HOMEDIR:-\"$HOME\"}/dead." -"article>. Default is ON." -msgstr "" -"Wenn ON, alle fehlgeschlagenen Beiträge in I<${TIN_HOMEDIR:-\"$HOME\"}/dead." -"articles> behalten, zusätzlich zum Speichern des letzten fehlgeschlagenen " -"Beitrags in I<${TIN_HOMEDIR:-\"$HOME\"}/dead.article>. Die Voreinstellung " -"ist ON." - -#. type: TP -#: doc/tin.1:2039 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2043 -msgid "" -"This option controls the processing and display of articles that are " -"killed. There are 3 options:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2050 -msgid "" -"B is the 'traditional' behavior of B. Only " -"unread articles are killed once only by marking them read. As filtering only " -"happens on unread articles with B set to 0, B " -"and B are only shown once. When you reenter the " -"group the mark will be gone." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2055 doc/tin.5:1792 -msgid "" -"B will process all articles in the group and " -"therefore there is a processing overhead when using this option. Killed " -"articles are threaded as normal but they will be marked with " -"B." -msgstr "" -"B wird auf alle Artikel in der Gruppe " -"angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls " -"diese Option verwendet wird. Gelöschte Artikel werden wie gewohnt in Threads " -"angezeigt, sind jedoch mit B markiert." - -#. type: Plain text -#: doc/tin.1:2059 doc/tin.5:1796 -msgid "" -"B will process all articles in the group and " -"therefore there is a processing overhead when using this option. Killed " -"articles simply does not get displayed at all." -msgstr "" -"B wird alle Artikel in der Gruppe " -"angewendet und verursacht daher einen erhöhten Bearbeitungsaufwand, falls " -"diese Option verwendet wird. Gelöschte Artikel werden überhaupt nicht " -"angezeigt." - -#. type: Plain text -#: doc/tin.1:2061 -msgid "Default is 0 (B)." -msgstr "Voreinstellung ist 0 (B)." - -#. type: TP -#: doc/tin.1:2061 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2067 doc/tin.5:1803 -msgid "" -"Allows 8bit characters unencoded in the header of mail message. Default is " -"OFF. Turning it ON is effective only if B is also set to " -"8bit. Leaving it OFF is safe for most users and compliant to Internet Mail " -"Standard (B and B). Default is OFF." -msgstr "" -"Erlaubt unkodierte 8-Bit-Zeichen im Header von E-Mail-Nachrichten. Der " -"Standardwert ist OFF. Das Aktivieren hat nur Wirkung, wenn " -"B auch auf 8bit gesetzt ist. Das Beibehalten auf OFF ist " -"für die meisten Benutzer sicher und entspricht dem Internet Mail Standard " -"(B und B). Die Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:2067 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2075 -msgid "" -"User's mail address (and full name), if not username@host. This is used when " -"creating articles, sending mail and when B<\\%pgp>(1) / B<\\%gpg>(1) " -"signing (B)." -msgstr "" -"E-Mail-Adresse des Benutzers (und vollständiger Name), falls nicht " -"benutzername@host. Wird beim Erstellen von Artikeln, beim Versenden von E-" -"Mails und beim Signieren mit B<\\%pgp>(1) / B<\\%gpg>(1) (B) " -"verwendet." - -#. type: TP -#: doc/tin.1:2075 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2079 doc/tin.5:1813 -msgid "" -"MIME encoding of the body in mail message, if necessary (8bit, base64, " -"quoted-printable, 7bit). Default is quoted-printable." -msgstr "" -"MIME-Kodierung des Textkörpers in E-Mail-Nachrichten falls erforderlich " -"(8bit, base64, quoted-printable, 7bit). Voreinstellung ist quoted-printable." - -#. type: TP -#: doc/tin.1:2079 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2085 doc/tin.5:1819 -msgid "" -"Format of quote line when replying (via mail) to an article (%A=Address, " -"%D=Date, %F=Fullname+Address, %G=Groupname, %M=Message-ID, %N=Fullname, " -"%C=Firstname, %I=Initials). If the article has multiple addresses only the " -"first is evaluated. Default is \"In article %M you wrote:\"" -msgstr "" -"Format der Einleitungszeile für Mailantworten (%A=Mailadresse, %D=Datum, " -"%F=Name und Adresse, %G=Name der Gruppe, %M=Message-ID, %N=Name des Autors, " -"%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere " -"Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist \"In " -"article %M you wrote:\"." - -#. type: TP -#: doc/tin.1:2085 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2095 doc/tin.5:1829 -msgid "" -"Select one of the following mailbox-formats: MBOXO (default, except on SCO), " -"MBOXRD or MMDF (default on SCO). See B<\\%mbox>(5) and B for " -"more details on MBOXO and MBOXRD and B<\\%mmdf>(5) for more details about " -"MMDF." -msgstr "" - -#. type: TP -#: doc/tin.1:2095 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2104 doc/tin.5:1838 -msgid "" -"The directory where articles/threads are to be saved in B<\\%mbox>(5) " -"format. This feature is mainly for use with the B<\\%mutt>(1) mail program. " -"It allows the user to save articles/threads/groups simply by giving '=' as " -"the filename to save to. Default is I<${TIN_HOMEDIR:-\"$HOME\"}/Mail>." -msgstr "" - -#. type: TP -#: doc/tin.1:2104 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2110 doc/tin.5:1844 -msgid "" -"The format string used to create the mailer command with parameters that is " -"used for mailing articles to other people. Default is '%M \"%T\" E " -"%F' (e.g., /bin/mail \"iain\" E ~/.article). The flexible format allows " -"other mailers with different command line parameters to be used such as" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2115 doc/tin.5:1849 -#, no-wrap -msgid "" -"sendmail -oem -t E %F\n" -"mutt -H %F\n" -"claws-mail --compose \"mailto:%T?subject=%S&insert=%F\"\n" -msgstr "" -"sendmail -oem -t E %F\n" -"mutt -H %F\n" -"claws-mail --compose \"mailto:%T?subject=%S&insert=%F\"\n" - -#. type: Plain text -#: doc/tin.1:2119 doc/tin.5:1853 -msgid "" -"B must be set adequate. The following substitutions are " -"supported:" -msgstr "" -"B muss passend dazu gesetzt sein. Folgende Ersetzungen " -"werden unterstützt:" - -#. type: ta -#: doc/tin.1:2121 doc/tin.5:1855 -#, no-wrap -msgid "\\w'%S'u +\\w'default_mailer'u" -msgstr "\\w'%S'u +\\w'default_mailer'u" - -#. type: Plain text -#: doc/tin.1:2128 doc/tin.5:1862 -#, no-wrap -msgid "" -"%F\tfilename\n" -"%M\tdefault_mailer\n" -"%S\tsubject-field\n" -"%T\tto-filed\n" -"%U\tusername\n" -"%%\t%\n" -msgstr "" -"%F\tDateiname\n" -"%M\tdefault_mailer\n" -"%S\tSubject-Feld\n" -"%T\tTo-Feld\n" -"%U\tBenutzername\n" -"%%\t%\n" - -#. type: TP -#: doc/tin.1:2130 -#, no-wrap -msgid "B<'Mark as (un)read' ignores tags (mark_ignore_tags)>" -msgstr "B<'Art. (un)gelesen markieren' ignorie... (mark_ignore_tags)>" - -#. type: Plain text -#: doc/tin.1:2138 doc/tin.5:1875 -msgid "" -"When this is ON, the B ('B'), B " -"('B'), B ('B') at Group level and B " -"('B') at Thread level functions mark just the current article or thread, " -"ignoring other tagged, (un)read articles. When OFF, the same function " -"presents a menu with choices of the current thread or article, all tagged, " -"unread articles, or nothing." -msgstr "" - -#. type: TP -#: doc/tin.1:2138 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2141 doc/tin.5:1867 -msgid "If ON mark articles that are saved as read. Default is ON." -msgstr "" -"Falls ON werden gespeicherte Artikel als gelesen markiert. Voreinstellung " -"ist ON." - -#. type: TP -#: doc/tin.1:2141 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2153 doc/tin.5:1887 -msgid "" -"Path, name and options of external B<\\%metamail>(1) program used to view " -"non-textual parts of articles. To use the built-in viewer, set to --" -"internal. This is the default value when B<\\%metamail>(1) is not " -"installed. Leave it blank if you don't want any automatic viewing of non-" -"textual attachments. The B ('B') command can always be " -"used to manually view any attachments. See also B." -msgstr "" - -#. type: TP -#: doc/tin.1:2153 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2168 -msgid "" -"Charset supported locally, which is also used for MIME header (charset " -"parameter and charset name in header encoding) in mail and news postings. If " -"B is defined at compile time, text in charset other " -"than the value of this parameter is considered not displayable and " -"represented as '?'. Otherwise, all character sets are regarded as compatible " -"with the display. If it's not set, the value of the environment variable " -"$B is used. US-ASCII or compile-time default is used in case " -"neither of them is defined. If your system supports B<\\%iconv>(3), or B<\\" -"%ucnv_*>(), this option is disabled and you should use B " -"instead." -msgstr "" - -#. type: TP -#: doc/tin.1:2168 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2181 -msgid "" -"Charset used for posting and MIME headers; replaces B. " -"Conversion between B and local charset (determined via " -"B<\\%nl_langinfo>(3)) is done via B<\\%iconv>(3), or B<\\%ucnv_*>(), if " -"none of these functions are available on your system this option is disabled " -"and you have to use B instead. B is limited " -"to one of the following charsets:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2184 doc/tin.5:1918 -msgid "" -"US-ASCII, ISO-8859-{1,2,3,4,5,7,9,10,13,14,15,16}, KOI8-{R,U,RU} EUC-{CN,JP," -"KR,TW}, ISO-2022-{CN,CN-EXT,JP,JP-1,JP-2}, Big5, UTF-8" -msgstr "" -"US-ASCII, ISO-8859-{1,2,3,4,5,7,9,10,13,14,15,16}, KOI8-{R,U,RU} EUC-{CN,JP," -"KR,TW}, ISO-2022-{CN,CN-EXT,JP,JP-1,JP-2}, Big5, UTF-8" - -#. type: Plain text -#: doc/tin.1:2190 doc/tin.5:1924 -msgid "" -"Not all values might work on your system, see B<\\%iconv_open>(3) for more " -"details. If it's not set, the value of the environment variable " -"$B is used. US-ASCII or compile-time default is used in case " -"neither of them is defined." -msgstr "" - -#. type: TP -#: doc/tin.1:2190 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2195 doc/tin.5:1929 -msgid "" -"Character attribute of words emphasized like _this_. It depends on your " -"terminal which attributes are usable. See also B and " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2195 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2200 doc/tin.5:1934 -msgid "" -"Character attribute of words emphasized like /this/. It depends on your " -"terminal which attributes are usable. See also B and " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2200 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2205 doc/tin.5:1939 -msgid "" -"Character attribute of words emphasized like *this*. It depends on your " -"terminal which attributes are usable. See also B and " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2205 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2210 doc/tin.5:1944 -msgid "" -"Character attribute of words emphasized like -this-. It depends on your " -"terminal which attributes are usable. See also B and " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2210 -#, no-wrap -msgid "B<(newnews)>" -msgstr "B<(newnews)>" - -#. type: Plain text -#: doc/tin.1:2214 -msgid "" -"These are internal timers used by B to keep track of new newsgroups. " -"Do not change them unless you understand what they are for." -msgstr "" - -#. type: TP -#: doc/tin.1:2214 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2221 doc/tin.5:1957 -msgid "" -"Which news headers you wish to see. If you want to see _all_ the headers, " -"place an '*' as this value. This is the only way a wildcard can be used. If " -"you enter 'X-' as the value, you will see all headers beginning with " -"'X-' (like X-Alan or X-Pape). You can list more than one by delimiting with " -"spaces. Not defining anything turns off this option." -msgstr "" -"Welche Header wollen Sie sehen. Wenn Sie _alle_ sehen wollen, setzen Sie ein " -"'*' als Wert ein. Dies ist die einzige Möglichkeit, um Platzhalter " -"(Wildcards) zu nutzen. Wenn Sie als Wert 'X-' angeben, sehen Sie alle Header " -"die mit 'X-' beginnen (wie X-Alan oder X-Pape). Sie können mehrere durch " -"Leerzeichen getrennte Werte angeben. Wenn Sie hier nichts definieren wird " -"diese Option deaktiviert." - -#. type: TP -#: doc/tin.1:2221 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2230 doc/tin.5:1966 -msgid "" -"Same as B except it denotes the opposite. An " -"example of using both options might be if you thought 'X-' headers were A " -"Good Thing(tm), but thought Alan and Pape were miscreants... well then you " -"would do something like this: B " -"B Not defining anything turns off " -"this option." -msgstr "" -"Genau das Gleiche wie B, mit der Ausnahme, das es " -"das Gegenteil bewirkt. Wenn Sie dachten, das X-Header eine tolle Sachen " -"waren, nun aber festgestellt haben, das dort einiges überflüssiges steht, " -"dann könnten Sie wie folgt vorgehen: B " -"B Wenn Sie hier nichts angeben, " -"wird diese Option deaktiviert." - -#. type: TP -#: doc/tin.1:2230 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2236 doc/tin.5:1972 -msgid "" -"Format of quote line when posting/following up an article (%A=Address, " -"%D=Date, %F=Fullname+Address, %G=Groupname, %M=Message-ID, %N=Fullname, " -"%C=Firstname, %I=Initials). If the article has multiple addresses only the " -"first is evaluated. Default is \"%F wrote:\"." -msgstr "" -"Format der Einleitungszeile für Newsartikel (%A=Mailadresse, %D=Datum, " -"%F=Name und Adresse, %G=Name der Gruppe, %M=Message-ID, %N=Name des Autors, " -"%C=Vorname des Autors, %I=Initialen des Autor). Falls der Artikel mehrere " -"Adressen hat, wird nur die erste ausgewertet. Voreinstellung ist \"%F wrote:" -"\"." - -#. type: TP -#: doc/tin.1:2236 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2245 -msgid "" -"Time in seconds to wait for a response from the server. Default is 120. " -"Setting this to 0 means no timeout. As if you use the \"B<-C>\" option in " -"conjunction with a low value for B may result in a " -"timeout (and disconnect in batch mode) when connecting to large servers or " -"entering large groups, because the timer is set when the command is sent to " -"the server and that needs some time to compress the large response, the " -"value should not be set too small." -msgstr "" - -#. type: TP -#: doc/tin.1:2245 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2249 -msgid "" -"The normalization form B should use to normalize unicode input. The " -"possible values are:" -msgstr "" -"Normalisierungsart die B verwenden soll um die Unicode-Eingabe zu " -"normalisieren. Die möglichen Werte sind:" - -#. type: Plain text -#: doc/tin.1:2252 doc/tin.5:1982 -msgid "B: no normalization" -msgstr "B: keine Normalisierung" - -#. type: Plain text -#: doc/tin.1:2254 doc/tin.5:1984 -msgid "B: Compatibility Decomposition, followed by Canonical Composition" -msgstr "" -"B: Kompatibilitätszerlegung, gefolgt von kanonischer Zusammensetzung" - -#. type: Plain text -#: doc/tin.1:2256 doc/tin.5:1986 -msgid "B: Compatibility Decomposition" -msgstr "B: Kompatibilitätszerlegung" - -#. type: Plain text -#: doc/tin.1:2258 doc/tin.5:1988 -msgid "B: Canonical Decomposition, followed by Canonical Composition" -msgstr "B: Kanonische Zerlegung, gefolgt von kanonischer Zusammensetzung" - -#. type: Plain text -#: doc/tin.1:2260 doc/tin.5:1990 -msgid "B: Canonical Decomposition" -msgstr "B: Kanonische Zerlegung" - -#. type: Plain text -#: doc/tin.1:2262 doc/tin.5:1992 -msgid "" -"B: Compatibility Decomposition, followed by Canonical Composition " -"and Case Folding" -msgstr "" -"B: Kompatibilitätszerlegung, gefolgt von kanonischer " -"Zusammensetzung und Faltung" - -#. type: Plain text -#: doc/tin.1:2266 -msgid "" -"Some normalization modes are only available if they are supported by the " -"library B uses to do the normalization. NFC should be used if possible " -"(B)." -msgstr "" -"Einige Normalisierungsarten sind nur verfügbar, wenn sie von der Bibliothek " -"unterstützt werden, die B verwendet, um die Normalisierung " -"durchzuführen. Nach Möglichkeit sollte NFC verwendet werden (B)." - -#. type: TP -#: doc/tin.1:2266 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2271 -msgid "" -"Format string B uses for mime header at Page level. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"[-- %T%S%*n%z%*l%!c%!d%*e " -"--]\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung von Mime-Headern auf " -"Artikelebene benutzt. Fr weitere Informationen sei auf den Abschnitt " -"\"ANSICHTEN ANPASSEN\" verwiesen. Voreingestellt ist \"[-- %T%S%*n%z%*l%!c%!" -"d%*e--]\"." - -#. type: TP -#: doc/tin.1:2271 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2276 -msgid "" -"Format string B uses for uue header at Page level. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"[-- %T%S%*n%I%!d%*e --]\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung von UUE-Headern auf " -"Artikelebene benutzt. Für weitere Informationen sei auf den Abschnitt " -"\"ANSICHTEN ANPASSEN\" verwiesen. Voreingestellt ist \"[-- %T%S%*n%I%!d%*e " -"--]\"." - -#. type: TP -#: doc/tin.1:2276 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2280 doc/tin.5:2013 -msgid "" -"If ON put cursor at first unread article in group otherwise at last article. " -"Default is ON." -msgstr "" -"Falls ON wird der Cursor auf den ersten ungelesenen Artikel in der Gruppe " -"gesetzt, andernfalls auf den letzten Artikel." - -#. type: TP -#: doc/tin.1:2280 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2291 doc/tin.5:2024 -msgid "" -"Allows 8bit characters unencoded in the header of a news article, if set " -"this also disables the generation of MIME-headers when they are usually " -"required. Default is OFF. Only enacted if B is also set " -"to 8bit. In a number of local hierarchies where 8bit characters are used, " -"using unencoded (raw) 8bit characters in header is acceptable and sometimes " -"even recommended so that you need to check the convention adopted in the " -"local hierarchy of your interest to determine what to do with this and " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2291 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2296 doc/tin.5:2029 -msgid "" -"MIME encoding of the body in news message, if necessary. (8bit, base64, " -"quoted-printable, 7bit). Default is 8bit, which leads to no encoding. " -"base64 and quoted-printable are usually undesired on usenet." -msgstr "" - -#. type: TP -#: doc/tin.1:2296 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2303 -msgid "" -"If ON, then B will start an appropriate viewer program to display any " -"files that were post processed and uudecoded. The program is determined " -"using the B<\\%mailcap>(5) file. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2303 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2309 doc/tin.5:2043 -msgid "" -"This specifies whether to perform post processing on saved articles. " -"Because the shell archive may contain commands you may not want to be " -"executed, be careful when extracting shell archives. The following values " -"are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2312 doc/tin.5:2046 -msgid "B (default), no post processing is done." -msgstr "B (Voreinstellung), es wird keine Nachbearbeitung gemacht." - -#. type: Plain text -#: doc/tin.1:2316 doc/tin.5:2050 -msgid "B, unpacking of multi-part B<\\%shar>(1) files only." -msgstr "" -"B, Entpacken nur von mehrteiligen B<\\%shar>(1)-Dateien." - -#. type: Plain text -#: doc/tin.1:2318 doc/tin.5:2052 -msgid "B, binary attachments and data will be decoded and saved." -msgstr "B, binäre Anhänge und Daten werden dekodiert und gespeichert." - -#. type: TP -#: doc/tin.1:2319 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2327 doc/tin.5:2061 -msgid "" -"Keep posted articles in given file. If the given filename does not contain " -"any expandable strings it will be prefixed with I<${TIN_HOMEDIR:-\"$HOME\"}/" -"Mail/>. If no filename is set then postings will not be saved. See the " -"section \"MAILING PIPING PRINTING REPOSTING AND SAVING ARTICLES\" for more " -"information about the various expansion characters. Default is 'posted'." -msgstr "" - -#. type: TP -#: doc/tin.1:2327 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2331 doc/tin.5:2065 -msgid "" -"If ON, then the full article header is sent to the printer. Otherwise only " -"the ''Subject:'' and ''From:'' fields are output. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2331 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2340 -msgid "" -"The printer program with options that is to be used to print articles. The " -"default is B<\\%lpr>(1) for BSD machines and B<\\%lp>(1) for SysV " -"machines. Printing from B may have been disabled by the System " -"Administrator." -msgstr "" - -#. type: TP -#: doc/tin.1:2340 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2344 doc/tin.5:2079 -msgid "" -"If ON only save/print/pipe/mail unread articles (tagged articles excepted). " -"Default is OFF." -msgstr "" -"Falls ON speichere/drucke/pipe/maile nur ungelesene Artikel (markierte " -"Artikel ausgenommen). Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:2344 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2348 -msgid "" -"If ON show empty ''Followup-To:'' header when editing an article. Default is " -"OFF." -msgstr "" -"Falls ON zeige leere ''Followup-To:''-Kopfzeile im Editor. Voreinstellung " -"ist OFF." - -#. type: TP -#: doc/tin.1:2348 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2354 doc/tin.5:2089 -msgid "" -"The character used in quoting included text to article followups and mail " -"replies. The '_' character represents a blank character and is replaced with " -"' ' when read, %I is replaced by author's initials. If the article has " -"multiple addresses only the first is evaluated. Default is 'E_'." -msgstr "" - -#. type: TP -#: doc/tin.1:2354 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2361 -msgid "" -"How articles should be quoted when following up or replying to them. There " -"are a number of things that can be done: empty lines can be quoted, " -"signatures can be quoted and quote_chars can be compressed when quoting " -"multiple times (for example, 'E E E' will be turned into " -"'EEE'). The default is to compress quotes, and to quote empty " -"lines." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2365 -msgid "" -"When you are viewing an article in raw mode ('B<^H>'), and follow up or " -"reply to it, the signature will be quoted even if it would otherwise not " -"be. If B is off, then the signature will never be quoted." -msgstr "" - -#. type: TP -#: doc/tin.1:2365 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2370 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching lines are shown in B. If B is blank, then " -"B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2370 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2375 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching lines are shown in B. If B is blank, then " -"B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2375 -#, no-wrap -msgid "B= 3 times q.l. (quote_regex3)>" -msgstr "B=3-fach zitierte Z. (quote_regex3)>" - -#. type: Plain text -#: doc/tin.1:2380 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching lines are shown in B. If B is blank, then " -"B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2380 -#, no-wrap -msgid "B
" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2384 doc/tin.5:2136 -msgid "" -"If set to 0, this feature is deactivated, otherwise it means the number of " -"days. Default is 2." -msgstr "" -"Wenn auf 0 gesetzt, ist diese Funktion deaktiviert, ansonsten bedeutet es " -"die Anzahl der Tage." - -#. type: TP -#: doc/tin.1:2384 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2388 -msgid "" -"If ON B does the rendering of bi-directional text. If OFF B leaves " -"the rendering of bi-directional text to the terminal. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2388 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2393 doc/tin.5:2148 -msgid "" -"The news I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file is " -"reread at regular intervals to show if any new news has arrived. Default is " -"1200. Setting this to 0 will disable this feature." -msgstr "" - -#. type: TP -#: doc/tin.1:2393 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2397 doc/tin.5:2152 -msgid "" -"Directory where articles/threads are saved. Default is I<${TIN_HOMEDIR:-" -"\"$HOME\"}/News>." -msgstr "" -"Verzeichnis, in dem Artikel/Threads gespeichert werden. Voreinstellung ist " -"I<${TIN_HOMEDIR:-\"$HOME\"}/News>." - -#. type: TP -#: doc/tin.1:2397 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2401 doc/tin.5:2156 -msgid "" -"If the score of an article is below or equal this value the article gets " -"marked as killed." -msgstr "" - -#. type: TP -#: doc/tin.1:2401 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2405 doc/tin.5:2160 -msgid "" -"If the score of an article is above or equal this value the article gets " -"marked as hot." -msgstr "" - -#. type: TP -#: doc/tin.1:2405 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2409 doc/tin.5:2164 -msgid "" -"Score of an article which should be killed, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2409 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2413 doc/tin.5:2168 -msgid "" -"Score of an article which should be marked hot, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2413 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2421 -msgid "" -"The number of lines that will be scrolled up/down in the article pager when " -"using cursor-up/down. The default is 1 (line-by-line). Set to 0 to get " -"traditional B page-by-page scrolling. Set to -1 to get page-by-page " -"scrolling where the top/bottom line is carried over onto the next page. " -"This setting supersedes show_last_line_prev_page=ON. Set to -2 to get half-" -"page scrolling. This setting supersedes B=OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2421 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2425 -msgid "" -"Format string B uses for Selection level representation. See the " -"section \"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%f\\ %n\\ %U\\ \\ " -"%G\\ \\ %d\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung der Auswahlebene " -"benutzt. Für weitere Informationen sei auf den Abschnitt \"ANSICHTEN " -"ANPASSEN\" verwiesen. Voreingestellt ist \"%f\\ %n\\ %U\\ \\ %G\\ \\ %d\"." - -#. type: TP -#: doc/tin.1:2425 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2429 doc/tin.5:2211 -msgid "" -"Which information about the author should be shown. Default is 2, authors " -"full name." -msgstr "" -"Welche Informationen über den Autor sollen angezeigt werden. Die " -"Voreinstellung ist 2, der vollständige Name des Autors." - -#. type: Plain text -#: doc/tin.1:2432 doc/tin.5:2214 -msgid "B, only the ''Subject:'' line will be displayed." -msgstr "B, nur die ''Subject:'' Zeile wird angezeigt." - -#. type: Plain text -#: doc/tin.1:2435 doc/tin.5:2217 -msgid "" -"B
, ''Subject:'' line & the address part of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2438 doc/tin.5:2220 -msgid "" -"B, ''Subject:'' line & the authors full name part of the " -"\\&''From:'' line are displayed (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2441 doc/tin.5:2223 -msgid "" -"B
, ''Subject:'' line & all of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: TP -#: doc/tin.1:2442 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2451 -msgid "" -"If ON show a short group description text after newsgroup name at the group " -"selection level. The ''B<-d>'' command-line flag will override the setting " -"and turn descriptions off. The text used is taken from the I<${TIN_LIBDIR:-" -"NEWSLIBDIR}/newsgroups> file and if supported (requires B to be built " -"with mh-mail-handling support) from I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"mailgroups> for mailgroups. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2451 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2454 doc/tin.5:2196 -msgid "Function used for sorting articles. Default is 0." -msgstr "Sortierfunktion für Artikel. Voreinstellung ist 0." - -#. type: Plain text -#: doc/tin.1:2459 doc/tin.5:2201 -msgid "Use B<\\%qsort>(3) for sorting." -msgstr "Mit B<\\%qsort>(3) sortieren." - -#. type: Plain text -#: doc/tin.1:2464 doc/tin.5:2206 -msgid "" -"Use B<\\%heapsort>(3) for sorting. This might be faster in large groups " -"with long threads (somewhat presorted data)." -msgstr "" -"Mit B<\\%heapsort>(3) sortieren. Kann in großen Gruppen mit langen Threads " -"schneller sein." - -#. type: TP -#: doc/tin.1:2465 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2470 -msgid "" -"Allows you to select whether B shows a help indication, a new mail " -"indication, both, or neither in the various level titles. Default is 3." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2473 doc/tin.5:2247 -msgid "B." -msgstr "B." - -#. type: Plain text -#: doc/tin.1:2475 doc/tin.5:2249 -msgid "B." -msgstr "B." - -#. type: Plain text -#: doc/tin.1:2478 doc/tin.5:2252 -msgid "" -"B, show only the mail sign, and only if new " -"mail has arrived." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2481 doc/tin.5:2255 -msgid "" -"B, show mail sign if new mail has " -"arrived otherwise show help sign." -msgstr "" - -#. type: TP -#: doc/tin.1:2482 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2486 doc/tin.5:2260 -msgid "" -"If ON show only new/unread articles otherwise show all articles. Default is " -"ON." -msgstr "" -"Falls ON, werden nur neue/ungelesene Artikel angezeigt, andernfalls werden " -"alle Artikel angezeigt." - -#. type: TP -#: doc/tin.1:2486 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2490 doc/tin.5:2264 -msgid "" -"If ON show only subscribed groups that contain unread articles. Default is " -"OFF." -msgstr "" -"Falls ON zeige nur abonnierte Gruppen mit ungelesen Artikeln. Voreinstellung " -"ist OFF." - -#. type: TP -#: doc/tin.1:2490 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2493 doc/tin.5:2267 -msgid "If OFF don't show signatures when displaying articles. Default is ON." -msgstr "Falls OFF zeige keine Signaturen an. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2493 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2497 doc/tin.5:2228 -msgid "" -"If ON show article score in the lower left corner when displaying articles. " -"Default is OFF. See also B and B." -msgstr "" -"Falls ON, wird die Bewertung bei der Anzeige von Artikeln in der unteren " -"linken Ecke gezeigt. Voreinstellung ist OFF. Siehe auch B und " -"B." - -#. type: TP -#: doc/tin.1:2497 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2500 doc/tin.5:2270 -msgid "If ON prepend the signature with sigdashes. Default is ON." -msgstr "" -"Falls ON, wird der Signatur ein Signaturtrenner vorangestellt. " -"Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2500 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2510 -msgid "" -"The path that specifies the signature file to use when posting, following up " -"to or replying to an article. If the path is a directory then the signature " -"will be randomly generated from files that are in the specified directory. " -"If the path starts with a ! the program the path points to will be executed " -"to generate a signature. In order to pass the group name to the program, %G " -"can be specified. This will be replaced by the name of the current " -"newsgroup. --none will suppress any signature. Default is I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.Sig>." -msgstr "" - -#. type: TP -#: doc/tin.1:2510 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2513 doc/tin.5:2286 -msgid "If ON add signature to reposted articles. Default is ON." -msgstr "" -"Falls ON wird die Signatur auch an repostete Artikel angehängt. " -"Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2513 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2518 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2518 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2522 doc/tin.5:2297 -msgid "" -"This specifies how articles should be sorted. Sort by ascending Date (6) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2525 doc/tin.5:2300 -msgid "B, don't sort articles." -msgstr "B, keine Sortierung." - -#. type: Plain text -#: doc/tin.1:2527 doc/tin.5:2302 -msgid "" -"B, sort articles by ''Subject:'' field descending." -msgstr "" -"B, Artikel absteigend nach ''Subject:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2529 doc/tin.5:2304 -msgid "B, sort articles by ''Subject:'' field ascending." -msgstr "" -"B, Artikel aufsteigend nach ''Subject:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2531 doc/tin.5:2306 -msgid "B, sort articles by ''From:'' field descending." -msgstr "B, Artikel absteigend nach ''From:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2533 doc/tin.5:2308 -msgid "B, sort articles by ''From:'' field ascending." -msgstr "B, Artikel aufsteigend nach ''From:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2535 doc/tin.5:2310 -msgid "B, sort articles by ''Date:'' field descending." -msgstr "B, Artikel absteigend nach ''Date:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2538 doc/tin.5:2313 -msgid "" -"B, sort articles by ''Date:'' field ascending (default)." -msgstr "B, Artikel aufsteigend nach ''Date:'' sortieren." - -#. type: Plain text -#: doc/tin.1:2540 doc/tin.5:2315 -msgid "B, sort articles by filtering score descending." -msgstr "" -"B, Artikel absteigend nach Bewertung sortieren." - -#. type: IP -#: doc/tin.1:2540 doc/tin.5:2315 -#, no-wrap -msgid "8" -msgstr "8" - -#. type: Plain text -#: doc/tin.1:2542 doc/tin.5:2317 -msgid "B, sort articles by filtering score ascending." -msgstr "" -"B, Artikel aufsteigend nach Bewertung sortieren." - -#. type: IP -#: doc/tin.1:2542 doc/tin.5:2317 -#, no-wrap -msgid "9" -msgstr "9" - -#. type: Plain text -#: doc/tin.1:2544 doc/tin.5:2319 -msgid "B, sort articles by ''Lines:'' field descending." -msgstr "B, Artikel absteigend nach ''Lines:'' sortieren." - -#. type: IP -#: doc/tin.1:2544 doc/tin.5:2319 -#, no-wrap -msgid "10" -msgstr "10" - -#. type: Plain text -#: doc/tin.1:2546 doc/tin.5:2321 -msgid "B, sort articles by ''Lines:'' field ascending." -msgstr "" -"B, Artikel aufsteigend nach ''Lines:'' sortieren." - -#. type: TP -#: doc/tin.1:2547 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2552 doc/tin.5:2326 -msgid "" -"This specifies how threads will be sorted. Sort by descending Score (1) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2555 doc/tin.5:2329 -msgid "B, don't sort threads." -msgstr "B, keine Sortierung der Threads." - -#. type: Plain text -#: doc/tin.1:2558 doc/tin.5:2332 -msgid "" -"B, sort threads by filtering score descending (default)." -msgstr "" -"B, Threads absteigend nach Bewertung sortieren." - -#. type: Plain text -#: doc/tin.1:2560 doc/tin.5:2334 -msgid "B, sort threads by filtering score ascending." -msgstr "" -"B, Threads aufsteigend nach Bewertung sortieren." - -#. type: Plain text -#: doc/tin.1:2562 doc/tin.5:2336 -msgid "" -"B, sort threads by date of last posting " -"descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2564 doc/tin.5:2338 -msgid "" -"B, sort threads by date of last posting " -"ascending." -msgstr "" - -#. type: TP -#: doc/tin.1:2565 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2570 doc/tin.5:2344 -msgid "" -"Set this option to a list of comma-separated strings to be warned if you are " -"replying to an article by mail where the e-mail address contains one of " -"these strings. The matching is case-insensitive. Example:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2572 doc/tin.5:2346 -msgid "I" -msgstr "I" - -#. type: TP -#: doc/tin.1:2572 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2577 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2577 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2583 doc/tin.5:2357 -msgid "" -"Strips the blanks from the end of each line therefore speeding up the " -"display when reading on a slow terminal or via modem. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2583 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2592 doc/tin.5:2366 -msgid "" -"Bogus groups are groups that are present in your I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc> file that no longer exist on the news server. There are " -"3 options. 0 means do nothing & always keep bogus groups. 1 means bogus " -"groups will be permanently removed. 2 means that bogus groups will appear on " -"the Group Selection Menu, prefixed with a 'D'. This allows you to " -"unsubscribe from them as and when you wish. Default is 0 (Always Keep)." -msgstr "" - -#. type: TP -#: doc/tin.1:2592 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2596 doc/tin.5:2370 -msgid "" -"If ON, then unsubscribed groups will be permanently removed from your " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2596 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2602 -msgid "" -"A regular expression to find Subject prefixes like \"Re:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2602 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2608 doc/tin.5:2382 -msgid "" -"A regular expression to find Subject suffixes like \"(was:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2608 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2613 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2613 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2618 doc/tin.5:2620 -msgid "" -"If enabled a search for the next unread article will wrap around all " -"articles to find also previous unread articles. If disabled the search stops " -"at the end of the thread list. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2618 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2622 -msgid "" -"If ON, show \"a as Umlaut-a, etc. Default is OFF. This behavior can also be " -"toggled in the article viewer via B ('B<\">')." -msgstr "" - -#. type: TP -#: doc/tin.1:2622 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2630 -msgid "" -"Defines which threading method to use. It's possible to set the threading " -"type on a per group basis by setting the group attribute variable " -"B to 0 \\(en 4 in the file I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"attributes>. (See also \"GROUP ATTRIBUTES\".) The default is Both Subject " -"and References. The choices are:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2633 -msgid "B, don't thread." -msgstr "B, keinen Diskussionsfaden aufbauen." - -#. type: Plain text -#: doc/tin.1:2635 -msgid "B, thread on ''Subject:'' only." -msgstr "B, Diskussionsfaden nur anhand von ''Subject:'' aufbauen." - -#. type: Plain text -#: doc/tin.1:2637 -msgid "B, thread on ''References:'' only." -msgstr "" -"B, Diskussionsfaden nur anhand von ''References:'' aufbauen." - -#. type: Plain text -#: doc/tin.1:2640 -msgid "" -"B, thread on ''References:'' then " -"\\&''Subject:'' (default)." -msgstr "" -"B, Diskussionsfaden anhand von ''References:'' " -"und ''Subject:'' aufbauen (Voreinstellung)." - -#. type: Plain text -#: doc/tin.1:2642 -msgid "B, thread multipart articles on ''Subject:''." -msgstr "" -"B, Diskussionsfaden mehrteiliger Artikel anhand von " -"'Subject:'' aufbauen." - -#. type: Plain text -#: doc/tin.1:2645 -msgid "" -"B, thread base upon a partial character match on " -"\\&''Subject:''." -msgstr "" - -#. type: TP -#: doc/tin.1:2646 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2650 doc/tin.5:2442 -msgid "" -"If ON catchup group/thread when leaving with the left arrow key. Default is " -"ON." -msgstr "" -"Falls ON: Catchup (als gelesen markieren) der Gruppe/des Threads beim " -"Verlassen mit der linken Cursortaste. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2650 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2654 -msgid "" -"Format string B uses for Thread level representation. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%n\\ %m\\ \\ [%L]\\ \\ %T\\ " -"\\ %F\"." -msgstr "" -"Diese Formatanweisung wird von B zur Darstellung der Threadebene " -"benutzt. Für weitere Informationen sei auf den Abschnitt \"ANSICHTEN " -"ANPASSEN\" verwiesen. Voreingestellt ist \"%n\\ %m\\ \\ [%L]\\ \\ %T\\ \\ " -"%F\"." - -#. type: TP -#: doc/tin.1:2654 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2658 -msgid "" -"How closely the subjects must match for two threads to be considered part of " -"the same thread. This is a percentage and the default if 75%." -msgstr "" - -#. type: TP -#: doc/tin.1:2658 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2662 doc/tin.5:2446 -msgid "" -"How the total score of a thread is computed. Default is 0, the maximum score " -"in this thread." -msgstr "" -"Wie die Gesamtpunktzahl eines Threads berechnet wird. Voreinstellung ist 0, " -"die maximale Punktzahl in diesem Diskussionsfaden (Thread)." - -#. type: Plain text -#: doc/tin.1:2665 doc/tin.5:2449 -msgid "B, the maximum score in this thread." -msgstr "B, Maximalwert im Diskussionsfaden." - -#. type: Plain text -#: doc/tin.1:2667 doc/tin.5:2451 -msgid "B, the sum of all scores in this thread." -msgstr "B, Summer aller Bewertungen im Diskussionsfaden." - -#. type: Plain text -#: doc/tin.1:2669 doc/tin.5:2453 -msgid "B, the average score in this thread." -msgstr "B, Durchschnitt aller Bewertungen im Diskussionsfaden." - -#. type: TP -#: doc/tin.1:2670 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2675 -msgid "" -"The name of file containing all trusted CA certificates used for NNTPS (B<\\" -"%RFC8143>) connections. If left empty the system default will be used." -msgstr "" - -#. type: TP -#: doc/tin.1:2675 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2683 doc/tin.5:2467 -msgid "" -"If ON append //TRANSLIT to the first argument of B<\\%iconv_open>(3) to " -"enable transliteration. This means that when a character cannot be " -"represented in the target character set, it can be approximated through one " -"or several similarly looking characters. On systems where this extension " -"doesn't exist, this option is disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2683 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2687 -msgid "" -"Allows you to select how B treats blank lines in article bodies. " -"Default is 0. This option does not affect lines within verbatim blocks." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2690 doc/tin.5:2476 -msgid "B, do nothing." -msgstr "B." - -#. type: Plain text -#: doc/tin.1:2692 doc/tin.5:2478 -msgid "B." -msgstr "B." - -#. type: Plain text -#: doc/tin.1:2694 doc/tin.5:2480 -msgid "B." -msgstr "B." - -#. type: Plain text -#: doc/tin.1:2696 doc/tin.5:2482 -msgid "" -"B, skip leading and trailing blank lines." -msgstr "" -"B, Führende und abschließende Leerzeilen " -"überspringen." - -#. type: Plain text -#: doc/tin.1:2699 doc/tin.5:2485 -msgid "" -"B, replace multiple blank lines between text " -"blocks with one blank line." -msgstr "" -"B, Leerzeilen zwischen " -"Textblöcken zusammenfassen." - -#. type: Plain text -#: doc/tin.1:2701 doc/tin.5:2487 -msgid "B, 4 + 1" -msgstr "" -"B, 4 + 1; Leerzeilen zwischen Textblöcken zusammenfassen und " -"führende Leerzeilen überspringen." - -#. type: Plain text -#: doc/tin.1:2703 doc/tin.5:2489 -msgid "B, 4 + 2" -msgstr "" -"B, 4 + 2; Leerzeilen zwischen Textblöcken zusammenfassen und " -"abschließende Leerzeilen überspringen." - -#. type: Plain text -#: doc/tin.1:2705 doc/tin.5:2491 -msgid "B, 4 + 3" -msgstr "" -"B, 4 + 3; Leerzeilen zwischen Textblöcken zusammenfassen und " -"führende sowie abschließende Leerzeilen überspringen" - -#. type: TP -#: doc/tin.1:2706 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2714 -msgid "" -"If ON remove soft hyphens in non verbatim blocks of articles in UTF-8 when " -"they are displayed in a UTF-8 locale. The character SOFT HYPHEN (U+00AD) is " -"an invisible format character that merely indicates a preferred intraword " -"line break position. However, some terminal emulators display a space or a " -"hyphen, for example, in the place of the soft hyphen. This setting can be " -"used to improve the display of those articles. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2714 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2719 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2719 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2722 -msgid "If ON remove I<~/.article> after posting. Default is ON." -msgstr "Falls ON entferne ~/.article nach dem posten. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2722 -#, no-wrap -msgid "B" -msgstr "B<Öffne URLs mit ... (url_handler)>" - -#. type: Plain text -#: doc/tin.1:2727 doc/tin.5:2512 -msgid "" -"The program that will be run when launching URLs in the article viewer using " -"B ('B'). The actual URL will be appended. Default is " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2727 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2730 doc/tin.5:2515 -msgid "Enable highlighting URLs in message body. Default is ON." -msgstr "Aktivieren der URL-Hervorhebung im Artikel. Voreinstellung ist ON." - -#. type: TP -#: doc/tin.1:2730 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2733 -msgid "If enabled B uses ANSI-colors. Default is OFF." -msgstr "ANSI-Farben in B benutzen. Voreinstellung ist OFF." - -#. type: TP -#: doc/tin.1:2733 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:2736 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2742 doc/tin.5:2529 -msgid "" -"Allows the mouse button support in an B<\\%xterm>(1x) to be enabled/" -"disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2742 -#, no-wrap -msgid "B" -msgstr "B<''X-Face:''s mit slrnface Anzeigen (use_slrnface)>" - -#. type: Plain text -#: doc/tin.1:2752 -msgid "" -"If enabled B uses B<\\%slrnface>(1) to interpret the ''X-Face:'' " -"header. For this option to have any effect, B must be running in an B<\\" -"%xterm>(1x) and B<\\%slrnface>(1) must be in your $B. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2752 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2756 -msgid "" -"If ON use UTF-8 characters for indicator ('\\(-E'), thread/attachment " -"tree and ellipsis ('...'). Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2756 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2760 -msgid "" -"A regular expression that B will use to find the begin of a verbatim " -"block." -msgstr "" -"Ein regulärer Ausdruck, der den Beginn eines wortgetreu wiederzugebenden " -"Absatzes findet." - -#. type: TP -#: doc/tin.1:2760 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2764 -msgid "" -"A regular expression that B will use to find the end of a verbatim " -"block." -msgstr "" -"Ein regulärer Ausdruck, der das Ende eines wortgetreu wiederzugebenden " -"Absatzes findet." - -#. type: TP -#: doc/tin.1:2764 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2767 doc/tin.5:2560 -msgid "If ON verbatim blocks will be detected. Default is ON." -msgstr "" -"Falls ON werden wortgetreue Textblöcke in Artikeln erkannt. Voreinstellung " -"ist ON." - -#. type: TP -#: doc/tin.1:2767 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2789 -msgid "" -"Allows you to select how B matches strings. The default is 0 and uses " -"the B<\\%wildmat>(3) notation, which is how this has traditionally been " -"handled. Setting this to 1 allows you to use B<\\%perl>(1) compatible " -"regular expressions B<\\%pcre>(3) or B<\\%pcre2>(3) (see also B<\\" -"%perlre>(1) and B<\\%pcrepattern>(3) or B<\\%pcre2pattern>(3)). You will " -"probably want to update your filter file if you use this regularly. NB: " -"Newsgroup names will always be matched using the B<\\%wildmat>(3) notation." -msgstr "" - -#. type: TP -#: doc/tin.1:2789 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2793 doc/tin.5:2588 -msgid "" -"Should the leading and ending stars, slashes, strokes and dashes also be " -"displayed, even when they are highlighting marks?" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2796 doc/tin.5:2591 -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2798 doc/tin.5:2593 -msgid "yes, B" -msgstr "ja, B anzeigen" - -#. type: Plain text -#: doc/tin.1:2800 doc/tin.5:2595 -msgid "print a B instead" -msgstr "ein B ausgeben" - -#. type: TP -#: doc/tin.1:2801 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2809 doc/tin.5:2604 -msgid "" -"Enable word highlighting. See B for the options " -"available. If B is enabled the colors specified in " -"B, B, B and B are " -"used for word highlighting else the character attributes specified in " -"B, B, B and B " -"are used. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2809 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2820 doc/tin.5:2615 -msgid "" -"Sets the column at which a displayed article body should be wrapped. If " -"this value is equal to 0, it defaults to the current screen width. If this " -"value is greater than your current screen width and B is " -"unset the part off-screen is not displayed. Thus setting this option to a " -"large value can be used to disable wrapping. If this value is negative the " -"wrap margin is the current screen width plus the given value (as long as the " -"result is still positive, otherwise it will fall back to the current screen " -"width). Default is 0, wrapping at the current screen width." -msgstr "" - -#. type: TP -#: doc/tin.1:2820 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:2827 doc/tin.5:2625 -msgid "" -"Format is the same as for B, this is used when answering " -"to a crossposting to several groups with no ''Followup-To:'' set." -msgstr "" -"Format ist das gleiche wie für B, dies wird verwendet, " -"wenn auf ein Crossposting in mehrere Gruppen geantwortet wird, ohne dass ein " -"''Followup-To:'' angegeben ist." - -#. type: SS -#: doc/tin.1:2827 -#, no-wrap -msgid "ATTRIBUTES MENU AND GROUP ATTRIBUTES" -msgstr "ATTRIBUTE UND GRUPPENATTRIBUTE MENÜ" - -#. type: Plain text -#: doc/tin.1:2834 -msgid "" -"B allows certain attributes to be set on a per group basis. If it " -"exists, the global attributes file, I<${TIN_LIBDIR:-NEWSLIBDIR}/attributes> " -"is read. After that, the user's own attributes file I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.tin/attributes> is read. The global attributes file is useful " -"for distributing system-wide defaults to new users who have no private " -"attributes file yet." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2842 -msgid "" -"Note that the IgrouplistE> line has to be specified before " -"the attributes are specified for that list. All attributes are set to a " -"reasonable default so you only have to specify the attribute that you want " -"to change (e.g., B). All toggle attributes are set by specifying ON/" -"OFF. Otherwise, these function exactly the same as their global equivalents. " -"For more details see B<\\%tin>(5)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2849 -msgid "" -"Attributes can also be changed from the attributes menu which can be " -"accessed by B ('BTABE>') from the options menu " -"or B ('B<^J>' or 'BCRE>') from the scopes menu. The " -"attributes menu looks and behaves very similar to the options menu. The " -"title shows the current scope. Attributes set in the current scope are " -"marked with '+' to the left of the attributes number." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2856 -msgid "" -"Besides the keys for moving around and changing values known from the " -"options menu the attributes menu provides the following command: " -"B ('B') which resets an attribute to a default value." -msgstr "" - -#. type: SS -#: doc/tin.1:2856 -#, no-wrap -msgid "SCOPES MENU" -msgstr "GÜLTIGKEITSBEREICHS-MENÜ" - -#. type: Plain text -#: doc/tin.1:2861 -msgid "" -"The scopes menu (accessible from the options menu with B " -"('B')) shows all scopes read from the global and local attributes file. " -"Scopes from the global attributes file are marked with '!\\&' to the left of " -"the scope number. Delete/rename/move are not possible with those scopes." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2873 -msgid "" -"In addition to the common moving keys the following commands are available: " -"B ('B<^J>' or 'BCRE>') enter the attributes menu for " -"the current scope, B ('B') edit the local " -"attributes file, B ('B') add a new scope, B " -"('B') delete the current scope, B ('B') move the current " -"scope to a new position, B ('B') rename the current scope. " -"B ('B') toggles the help mini menu at the bottom of " -"the screen and posting etiquette after composing an article " -"(B)." -msgstr "" - -#. type: SS -#: doc/tin.1:2873 -#, no-wrap -msgid "FILTERING ARTICLES" -msgstr "FILTERN VON ARTIKELN" - -#. FIXME - add scoring description -#. type: Plain text -#: doc/tin.1:2880 -msgid "" -"When there is a subject or an author which you are either very interested " -"in, or find completely uninteresting, you can easily instruct B to " -"I or I articles that match I that you " -"specify. This can be anything from the name of the author to the number of " -"lines in an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2887 -msgid "" -"When B starts up the user's kill-file I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"filter> or the file specified via ''B<-F>'' is read (see also B<\\" -"%tin>(5) ). Each time a newsgroup is entered the rules are applied and " -"articles killed or selected when they meet certain criteria." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2892 -msgid "" -"The degree to which rules are applied depend on the B tinrc " -"setting. By default killed articles will only be marked read. Adjust " -"B for more aggressive processing. Articles that match an auto-" -"selection rule are marked with a ''*''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2897 -msgid "" -"Filtering rules can be manually entered into I<${TIN_HOMEDIR:-\"$HOME\"}/." -"tin/filter> (but don't do this whilst running B else you will lose your " -"changes) or by using an on-screen menu within B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2902 -msgid "" -"The filtering capabilities of B have been significantly enhanced over " -"previous versions to include scoring and better pattern matching. It is " -"recommended that you read the file I in the B documentation " -"directory. This file can also be read online at" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2904 -msgid "Ehttp://bzr.tin.org/doc/filteringE." -msgstr "Ehttp://bzr.tin.org/doc/filteringE." - -#. FIXME - Next paragraph is out of date -#. type: Plain text -#: doc/tin.1:2917 -msgid "" -"The on-screen filtering menu is accessed by pressing B " -"('B<^K>') or B ('B<^A>') at the Group and Article levels. " -"It allows the user to kill or select an article that matches the current " -"''Subject:'' line, ''From:'' line or a string entered by the user. The user " -"entered string can be applied to the \\&''Subject:'' or ''From:'' line of an " -"article. The filter can be limited to the current newsgroup or it can apply " -"to all newsgroups. Once entered the user can abort the command and not save " -"the new filter, edit the full filter file or save filter." -msgstr "" - -#. type: SS -#: doc/tin.1:2917 -#, no-wrap -msgid "POSTING ARTICLES" -msgstr "ARTIKEL POSTEN" - -#. type: Plain text -#: doc/tin.1:2920 -msgid "" -"B allows posting of articles, follow-up to already posted articles and " -"replying direct through mail to the author of an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2930 -msgid "" -"Use the B ('B') command to post an article to a newsgroup. After " -"entering the post subject the default editor (i.e., B<\\%vi>(1)) or the " -"editor specified by the $B or $B environment variable will " -"be started and the article can be entered. To crosspost articles simply add " -"a comma and the name of the newsgroup(s) to the end of the ''Newsgroups:'' " -"line at the beginning of the article. After saving and exiting the editor " -"you are asked if you wish to a)bort posting the article, e)dit the article " -"again or p)ost the article to the specified newsgroup(s)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2935 -msgid "" -"Use the B ('B') command to display a history of the " -"articles you have posted. The date the article was posted, which newsgroups " -"the article was posted to and the articles subject line are displayed. See " -"the section \"POSTING HISTORY LISTING\" for more information." -msgstr "" -"Verwenden Sie den Befehl B ('B'), um eine Verlaufsliste " -"der von Ihnen geposteten Artikel anzuzeigen. Angezeigt werden das Datum, an " -"dem der Artikel gepostet wurde, in welchen Newsgruppen der Artikel gepostet " -"wurde und die Subjectzeile des Artikels. Weitere Informationen finden Sie im " -"Abschnitt \"POSTING VERLAUFSLISTE\"." - -#. type: Plain text -#: doc/tin.1:2943 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^W>') command to post a follow-up article to " -"an already posted article. The B command will copy the " -"text of the original article into the editor. The " -"B command will copy the text and all headers of " -"the original article into the editor. The editing procedure is the same as " -"when posting an article with the B ('B') command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2957 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^E>') command to reply direct through mail to " -"the author of an already posted article. The B command will " -"copy the text of the original article into the editor. The " -"B command will copy the text and all headers of the " -"original article into the editor. The editing procedure is the same as when " -"posting an article with the B ('B') command. After saving and " -"exiting the editor you are asked if you wish to abort sending the article " -"via B ('B'), edit the article again via B ('B') " -"or send the article to the author via B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:2957 -#, no-wrap -msgid "CUSTOMIZING THE ARTICLE QUOTE STRING" -msgstr "EINLEITUNGSZEILE ANPASSEN" - -#. type: Plain text -#: doc/tin.1:2966 -msgid "" -"When posting a followup to an article or replying direct to the author of an " -"article via email the text of the article can be quoted. The beginning of " -"the quoted text can contain information about the quoted article (e.g., Name " -"and the Message-ID of the article). If the article has multiple addresses " -"only the first is evaluated. To allow for different situations certain " -"information from the article can be used in the quoted string. The following " -"variables are expanded if found in the tinrc variables B, " -"B or B:" -msgstr "" - -#. type: ta -#: doc/tin.1:2968 -#, no-wrap -msgid "\\w'%A 'u +\\w'Address'u" -msgstr "\\w'%A 'u +\\w'Mailadresse'u" - -#. type: Plain text -#: doc/tin.1:2977 -#, no-wrap -msgid "" -"B<%A>\tAddress (Email)\n" -"B<%D>\tDate (uses B)\n" -"B<%F>\tFull address (%N E%AE)\n" -"B<%G>\tGroupname\n" -"B<%M>\tMessage-ID\n" -"B<%N>\tFullname of author\n" -"B<%C>\tFirstname of author\n" -"B<%I>\tInitials of author\n" -msgstr "" -"B<%A>\tMailadresse\n" -"B<%D>\tDatum (benutzt B)\n" -"B<%F>\tName und Adresse (%N E%AE)\n" -"B<%G>\tName der Gruppe\n" -"B<%M>\tMessage-ID\n" -"B<%N>\tName des Autors\n" -"B<%C>\tVorname des Autors\n" -"B<%I>\tInitialen des Autor\n" - -#. type: Plain text -#: doc/tin.1:2980 -msgid "e.g.," -msgstr "z. B." - -#. type: Plain text -#: doc/tin.1:2985 -#, no-wrap -msgid "" -"\\f(CRmail_quote_format=On %D in %G you wrote:\n" -"news_quote_format=In %M, %F wrote:\\fR\n" -msgstr "" -"\\f(CRmail_quote_format=On %D in %G you wrote:\n" -"news_quote_format=In %M, %F wrote:\\fR\n" - -#. type: Plain text -#: doc/tin.1:2989 -msgid "would expand to:" -msgstr "ergäbe folgendes:" - -#. type: Plain text -#: doc/tin.1:2994 -#, no-wrap -msgid "" -"\\f(CROn 21 Sep 1993 09:45:51 -0400 in alt.sources you wrote:\n" -"In EabcINN123@example.orgE, Joe Bar Ejoe@example.orgE wrote:\\fR\n" -msgstr "" -"\\f(CRAm 21. Sept 1993 9:45:51 -0400 in alt.sources schrieben Sie:\n" -"In EabcINN123@example.orgE schreib Joe Bar Ejoe@example.orgE:\\fR\n" - -#. type: Plain text -#: doc/tin.1:3004 -msgid "" -"The quoted text section of an article is marked by a preceding quote string " -"at the beginning of each quoted line. The default quote string is set to " -"\\&'E_'. The default can be changed by setting the tinrc variable " -"B to ones own preference. (Note that '_' underline is used to " -"represent a space)." -msgstr "" - -#. type: SS -#: doc/tin.1:3004 -#, no-wrap -msgid "MAILING PIPING PRINTING REPOSTING AND SAVING ARTICLES" -msgstr "MAILEN, WEITERLEITEN, DRUCKEN, NACHSENDEN UND SPEICHERN VON ARTIKELN" - -#. type: Plain text -#: doc/tin.1:3011 -msgid "" -"The command interface to B, B, B or " -"B ('B'), B ('B<|>'), B ('B'), B " -"or B ('B') and B, B or B " -"('B' and B, B or B 'B') " -"articles is the same for ease of use." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3016 -msgid "" -"Auto-saving with B<*AutoSave> ('B') is a special case and operates only " -"on marked articles. They will processed without any further prompting " -"according to the default save parameters defined in tinrc or by any " -"attributes set for the current group." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3020 -msgid "" -"Otherwise, the initial prompt will ask you to select which article, thread, " -"hot (auto-selected), regular expression pattern, tagged articles you wish to " -"mail, pipe etc." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3024 -msgid "" -"Tagged articles must have already been tagged with a B<*Tag> ('B') " -"command. All tagged articles can be untagged by a B<*Untag> ('B') untag " -"command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3030 -msgid "" -"If a regular expression pattern is selected you are asked to enter a pattern " -"(e.g., to match all articles subject lines containing 'net News' you enter " -"\"net News\"). Any articles that match the entered expression will be " -"mailed, piped etc. See also the B tinrc variable for advanced " -"pattern matching options." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3035 -msgid "" -"Various expansion characters are recognized when entering the directory and " -"file to save to. Environment variables (prefixed with '$') and user home " -"directories (prefixed by '~' or '~username') can be specified. Environment " -"variables can themselves contain other special characters." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3040 -msgid "" -"To save articles to a mailbox enter '=Emailbox nameE' when asked for " -"the save filename. If you enter just '=' then articles will be saved to a " -"mailbox with the name of the current newsgroup (eg, alt.sources). See " -"B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3045 -msgid "" -"To save in savedir/Enews.group.nameE/EfilenameE format enter " -"'+EfilenameE'. See B. Like '+' %G is expanded to the " -"current news.group.name but without B prefixed. %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3050 -msgid "" -"If saving multiple files at once the filename (if not referring to a " -"mailbox) will be extended by \".num\" where \"num\" is at least 3 digit " -"number counting up from 1. Environment variables are allowed within a " -"filename (e.g., I<$SOURCES/dir/filename>)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3056 -msgid "" -"When saving articles you can specify whether the saved files should be post " -"processed. A default process type can be set via B." -msgstr "" - -#. type: SS -#: doc/tin.1:3056 -#, no-wrap -msgid "AUTOMATIC MAILING AND SAVING NEW NEWS" -msgstr "AUTOMATISCHES MAILEN UND SPEICHERN VON UNGELESENEN ARTIKELN" - -#. type: Plain text -#: doc/tin.1:3068 -msgid "" -"B allows new/unread news articles to be mailed (''B<-M>'' and \\&''B<-" -"N>'' option) or saved (''B<-S>'' option) in batch mode for later reading. " -"Useful when going on holiday and you don't want to return and find that " -"expire has removed a whole load of unread articles. Best to run via B<\\" -"%cron>(8) everyday while away, after which you will be mailed a report of " -"which articles were mailed/saved from which newsgroups and the total number " -"of articles mailed/saved. Articles are saved in a private news structure " -"under your B directory (default is I<${TIN_HOMEDIR:-\"$HOME\"}/" -"News>). Be careful of using this option if you read a lot of groups because " -"you could overflow your file system." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3072 -msgid "" -"When using ''B<-S>'' together with a given directory to save to (''B<-s>'' " -"option), the same directory must be specified when reading the articles by " -"''B<-R>''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3079 -msgid "" -"If you only want to save some of your groups use the B tinrc " -"variable. Set to ON or OFF in tinrc to enable/disable saving of all groups " -"and then use the B attribute to fine tune which groups you want " -"to have saved. For example, if you want to save most of your groups, then " -"set B to ON in tinrc and selectively turn off the ones you don't " -"want using attributes." -msgstr "" - -#. type: TP -#: doc/tin.1:3079 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3083 -msgid "" -"(mail any unread articles in newsgroups specified in file newsrc.mail to the " -"local user iain and mark them as read)" -msgstr "" -"(alle ungelesenen Artikel in den in der Datei newsrc.mail angegebenen " -"Newsgruppen an den lokalen Benutzer iain senden und als gelesen markieren)" - -#. type: TP -#: doc/tin.1:3083 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3087 -msgid "" -"(save any unread articles in newsgroups specified in file newsrc.save and " -"mark them as read)" -msgstr "" -"(alle ungelesenen Artikel in den in der Datei newsrc.save angegebenen " -"Newsgruppen speichern und als gelesen markieren)" - -#. type: TP -#: doc/tin.1:3087 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3092 -msgid "(read any articles saved by B)" -msgstr "(mittels B gespeicherte Artikel lesen)" - -#. type: SS -#: doc/tin.1:3092 -#, no-wrap -msgid "RANGES" -msgstr "BEREICHE" - -#. type: Plain text -#: doc/tin.1:3104 -msgid "" -"A range is simply a group of items marked using the B (B<'#'>) " -"key. Certain B commands will operate on a range if one exists rather " -"than just the current item. A range is an expression of the form " -"EminE\\(enEmaxE, e.g., 10\\(en15 will highlight items 10 " -"through 15 on the current screen. Other than absolute numeric positions, '." -"\\&' can be used in place of the current cursor position and '$' can be used " -"to mean the highest number available. Entering '0' at the prompt undoes the " -"previously entered range selection. Currently the only commands that " -"understand ranges are B ('B'), B " -"('B') and B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:3104 -#, no-wrap -msgid "NEWSGROUP LISTS & WILDCARDS" -msgstr "NEWSGROUP LISTEN & WILDCARDS" - -#. type: Plain text -#: doc/tin.1:3116 -msgid "" -"Several places in B allow you to specify a list of newsgroups. These " -"include command-line groups, (un)subscribe groups, the AUTO[UN]SUBSCRIBE " -"mechanism. The scope= attributes file tag and the filter file group= tag " -"also use the same syntax. B interprets this variable similarly to B<\\" -"%rn>(1). It contains a list of patterns, separated by commas and possibly " -"prefixed with exclamation points. An exclamation point negates the meaning " -"of a match on this pattern, and can be used to cancel certain matches. See " -"B<\\%wildmat>(3) for details about the understood patterns. Some examples:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3118 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3120 -msgid "" -"Matches alt.config and everything in the 'news' hierarchy except news.test" -msgstr "" -"Passt auf alt.config und alles in der 'news'-Hierarchie außer news.test" - -#. type: Plain text -#: doc/tin.1:3125 -msgid "" -"See the explanation for the $B and $B " -"variables for further examples." -msgstr "" - -#. type: SS -#: doc/tin.1:3125 -#, no-wrap -msgid "SIGNATURES" -msgstr "SIGNATUREN" - -#. type: Plain text -#: doc/tin.1:3134 -msgid "" -"B will recognize a signature in either I<${TIN_HOMEDIR:-\"$HOME\"}/." -"signature> or I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>. If I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.signature> exists, then the signature will be pulled into the " -"editor for mail commands only. A signature in I<${TIN_HOMEDIR:-\"$HOME\"}/." -"signature> will not be pulled into the editor for posting commands since B<\\" -"%inews>(1) will append the signature itself." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3137 -msgid "" -"A signature in I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig> will be pulled into the " -"editor for both posting and mailing commands." -msgstr "" -"Eine Signatur in I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig> wird sowohl für Post- als " -"auch für Mail-Befehle in den Editor geladen." - -#. type: Plain text -#: doc/tin.1:3139 -msgid "The following is an example of a I<.Sig> file:" -msgstr "Nachstehend eine Beispiel I<.Sig> Datei:" - -#. type: Plain text -#: doc/tin.1:3144 -#, no-wrap -msgid "" -"\\f(CRNAMES Joe Bar Ejoe@example.orgE\n" -"SNAIL Musterweg 12, 99999 Notreal, Germany\\fR\n" -msgstr "" -"\\f(CRNAMES Erika Mustermann Eerika@example.orgE\n" -"SNAIL Heidestraße 17, 99999 Notreal, Germany\\fR\n" - -#. type: Plain text -#: doc/tin.1:3159 -msgid "" -"B also has the capability to generate random signatures on a per " -"newsgroup basis if so desired. The way to accomplish this is to specify the " -"default signature or the group attribute sigfile as a directory. If for " -"example the sigfile path is I and I<.sigs> is a directory " -"then B will select a random signature from any file that is in the " -"directory I<.sigs> (note: one signature per numbered file). A random " -"signature can also consist of a fixed part signature that can contain your " -"name, address etc. followed by the random sig. The fixed part of the random " -"sig is read from the file I<$HOME/.sigfixed>." -msgstr "" - -#. type: SS -#: doc/tin.1:3159 -#, no-wrap -msgid "CUSTOMIZING THE SCREEN FORMAT" -msgstr "ANSICHTEN ANPASSEN" - -#. type: Plain text -#: doc/tin.1:3165 -msgid "" -"The look of the Selection, Group and Thread level can be customized via " -"format strings. These format strings define the content and the position of " -"each element on the screen. Variables are used within the format strings as " -"placeholders. If the article has multiple addresses only the first is " -"evaluated. The following variables are available:" -msgstr "" -"Das Aussehen der Auswahl-, Gruppen- und Threadebene kann den eigenen " -"Bedürfnissen angepasst werden. Hierzu dienen Formatanweisungen, welche den " -"Inhalt und die Position der einzelnen Elemente einer Bildschirmzeile " -"definieren. Innerhalb der Formatanweisungen werden Platzhalter eingesetzt, " -"die später beim Bildschirmaufbau durch den eigentlichen Inhalt ersetzt " -"werden. Falls der Artikel mehrere Adressen hat, wird nur die erste " -"ausgewertet. Folgende Platzhalter stehen zur Verfügung:" - -#. type: ta -#: doc/tin.1:3168 -#, no-wrap -msgid "\\w'%G 'u +\\w'current group/thread/article number'u" -msgstr "\\w'%G 'u +\\w'aktuelle Gruppen-, Thread- oder Artikelnummer'u" - -#. type: Plain text -#: doc/tin.1:3185 -#, no-wrap -msgid "" -"B<%D>\tdate\n" -"B<%F>\tfrom, name and/or address\n" -"B<%G>\tnewsgroup name\n" -"B<%I>\tinitials\n" -"B<%L>\tline count\n" -"B<%M>\tmessage-id\n" -"B<%R>\tnumber of responses in thread\n" -"B<%S>\tscore\n" -"B<%T>\tthread tree\n" -"B<%U>\tunread count\n" -"B<%d>\tnewsgroup description\n" -"B<%f>\tnewsgroup flag\n" -"B<%m>\tarticle marks\n" -"B<%n>\tcurrent group/thread/article number\n" -"B<%s>\tsubject\n" -"B<%%>\t%\n" -msgstr "" -"B<%D>\tDatum\n" -"B<%F>\tAbsender, Name und/oder E-Mail Adresse\n" -"B<%G>\tName der Gruppe\n" -"B<%I>\tInitialen des Absenders\n" -"B<%L>\tAnzahl der Zeilen\n" -"B<%M>\tMessage-ID\n" -"B<%R>\tAnzahl der Antworten im Thread\n" -"B<%S>\tBewertung\n" -"B<%T>\tSubject und/oder Baumdarstellung des Thread\n" -"B<%U>\tAnzahl ungelesener Artikel\n" -"B<%d>\tGruppenbeschreibung\n" -"B<%f>\tGruppenkennzeichnung\n" -"B<%m>\tArtikelkennzeichnungen\n" -"B<%n>\taktuelle Gruppen-, Thread- oder Artikelnummer\n" -"B<%s>\tSubject\n" -"B<%%>\t%\n" - -#. type: Plain text -#: doc/tin.1:3190 -msgid "" -"Not all variables can be used in each level. The following table provides an " -"overview:" -msgstr "" -"Nicht alle Platzhalter können in jeder Ebene verwendet werden. Die folgende " -"Tabelle gibt einen Überblick über die Verfügbarkeit der einzelnen " -"Platzhalter:" - -#. type: ta -#: doc/tin.1:3193 -#, no-wrap -msgid "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" -msgstr "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" - -#. type: Plain text -#: doc/tin.1:3211 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%D>\t\tX\tX\n" -"B<%F>\t\tX\tX\n" -"B<%G>\tX\n" -"B<%I>\t\tX\tX\n" -"B<%L>\t\tX\tX\n" -"B<%M>\t\tX\tX\n" -"B<%R>\t\tX\n" -"B<%S>\t\tX\tX\n" -"B<%T>\t\t\tX\n" -"B<%U>\tX\n" -"B<%d>\tX\n" -"B<%f>\tX\n" -"B<%m>\t\tX\tX\n" -"B<%n>\tX\tX\tX\n" -"B<%s>\t\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" -"\tB\tB\tB\n" -"B<%D>\t\tX\tX\n" -"B<%F>\t\tX\tX\n" -"B<%G>\tX\n" -"B<%I>\t\tX\tX\n" -"B<%L>\t\tX\tX\n" -"B<%M>\t\tX\tX\n" -"B<%R>\t\tX\n" -"B<%S>\t\tX\tX\n" -"B<%T>\t\t\tX\n" -"B<%U>\tX\n" -"B<%d>\tX\n" -"B<%f>\tX\n" -"B<%m>\t\tX\tX\n" -"B<%n>\tX\tX\tX\n" -"B<%s>\t\tX\n" -"B<%%>\tX\tX\tX\n" - -#. type: Plain text -#: doc/tin.1:3215 doc/tin.1:3379 -msgid "Defaults for the format strings:" -msgstr "Voreingestellt sind folgende Formatanweisungen:" - -#. type: ta -#: doc/tin.1:3218 -#, no-wrap -msgid "\\w'select_format 'u +\\w'\"B<%n %m [%L] %T %F>\"'u" -msgstr "\\w'select_format 'u +\\w'\"B<%n %m [%L] %T %F>\"'u" - -#. type: Plain text -#: doc/tin.1:3222 -#, no-wrap -msgid "" -"B:\t\"B<%f %n %U %G %d>\"\n" -"B:\t\"B<%n %m %R %L %s %F>\"\n" -"B:\t\"B<%n %m [%L] %T %F>\"\n" -msgstr "" -"B:\t\"B<%f %n %U %G %d>\"\n" -"B:\t\"B<%n %m %R %L %s %F>\"\n" -"B:\t\"B<%n %m [%L] %T %F>\"\n" - -#. type: Plain text -#: doc/tin.1:3228 -msgid "" -"B controls whether the newsgroup description is shown or " -"not. The description can also be toggled with B " -"('B')." -msgstr "" -"Ob in der Auswahlebene die Gruppenbeschreibung angezeigt wird, hängt von " -"B ab. Außerdem kann mit B " -"('B') die Beschreibung aus- bzw. eingeblendet werden." - -#. type: Plain text -#: doc/tin.1:3233 -msgid "" -"The information displayed with 'B<%F>' depends on the value of " -"B. B resp. B " -"('B') switches through all available options." -msgstr "" -"Welche Absenderinformationen bei 'B<%F>' angezeigt werden ist abhängig von " -"B. Zusätzlich kann mit B bzw. " -"B ('B') durch die möglichen Anzeigeoptionen " -"durchgeschaltet werden." - -#. type: Plain text -#: doc/tin.1:3237 -msgid "" -"For date representation 'B<%D>' uses B. It is possible to " -"specify a different date format in round brackets (e.g., 'B<%(%d %b %y %H:" -"%M)D>'). See B for more details." -msgstr "" -"Für die Datumsanzeige mit 'B<%D>' wird B benutzt. Man kann " -"allerdings auch in runden Klammern ein eigenes Datumsformat angeben, das " -"anstelle von B benutzt werden soll. Der Platzhalter dafür würde " -"dann z. B. so aussehen: 'B<%(%d %b %y %H:%M)D>' (siehe B für " -"weiterführende Informationen)." - -#. type: Plain text -#: doc/tin.1:3241 -msgid "" -"The length of each item (except 'B<%%>') can be defined with a positive " -"number after the 'B<%>'. The following example displays the score in the " -"thread level 10 characters wide: 'B<%10S>'." -msgstr "" -"Die Länge der einzelnen Elemente (außer 'B<%%>') kann mit einer positiven " -"Zahl nach dem 'B<%>' definiert werden. Das folgende Beispiel stellt den " -"Bewertung in der Threadebene 10 Zeichen breit dar: 'B<%10S>'." - -#. type: Plain text -#: doc/tin.1:3247 -msgid "" -"If the newsgroup name is displayed together with the newsgroup description, " -"the width of the newsgroup name can be controlled via an optional comma " -"separated second value (e.g., 'B<%60,20G>'). It is valid to omit the first " -"value (e.g., ('B<%,20G>')). If no second value is given, B uses a " -"default value of 32." -msgstr "" -"Wenn der Gruppenname zusammen mit der Gruppenbeschreibung angezeigt wird, " -"kann die Breite des Gruppennamens über einen optionalen, durch Komma " -"getrennten, zweiten Wert gesteuert werden (z. B. 'B<%60,20G>'). Der erste " -"Wert kann weggelassen werden (z. B. ('B<%,20G>))'. Ist kein zweiter Wert " -"angegeben verwendet B ein Standardwert von 32." - -#. type: Plain text -#: doc/tin.1:3254 -msgid "" -"Some variables do have a default width which may lead to truncation. " -"Truncation for variables which contain only numbers happens by dividing the " -"value with a sufficient power of ten and adding a SI suffix to the result, " -"that is the variable holds a value of 54321 and the width for the variable " -"is 4 the result will be \"54 k\". If that's undesired you have to specify a " -"larger width manually, e.g., 'B<%6n>'. Here is an overview of the defaults:" -msgstr "" -"Einige Platzhalter haben eine voreingestellte Breite die unter Umständen " -"dazu führt, dass der Inhalt abgeschnitten wird. Für Platzhalter die nur " -"Zahlen enthalten wird der Wert durch eine passende Zehnerpotenz geteilt und " -"mit dem zugehörigen SI-Suffix versehen, z. B. wird bei einer Breite von vier " -"aus 54321 dann \"54 k\". Wenn das nicht gewünscht ist muss die Breite " -"angegeben werden, z. B. 'B<%6n>'. Hier ist eine Übersicht der " -"Voreinstellungen:" - -#. type: ta -#: doc/tin.1:3257 -#, no-wrap -msgid "\\w'Variable 'u +\\w'width'u" -msgstr "\\w'Platzhalter 'u +\\w'Breite'u" - -#. type: Plain text -#: doc/tin.1:3266 -#, no-wrap -msgid "" -"Variable\twidth\n" -"B<%I>\t 3\n" -"B<%L>\t 4\n" -"B<%M>\t10\n" -"B<%R>\t 3\n" -"B<%S>\t 6\n" -"B<%U>\t 5\n" -"B<%n>\t 4\n" -msgstr "" -"Platzhalter\tBreite\n" -"B<%I>\t 3\n" -"B<%L>\t 4\n" -"B<%M>\t10\n" -"B<%R>\t 3\n" -"B<%S>\t 6\n" -"B<%U>\t 5\n" -"B<%n>\t 4\n" - -#. type: Plain text -#: doc/tin.1:3277 -msgid "" -"If no length is given for 'B<%D>', the length is determined by the format " -"string for the date and the date of the current day. If the date format " -"string contains weekdays or months names it may happen that the date is " -"longer than determined in the first pass. In this case, the date is " -"truncated before display. This occurs, for example, if the current month is " -"May and the article to which the date is displayed was posted in December. " -"In such cases it might useful to determine the maximum length manually and " -"specify the length in the format string." -msgstr "" -"Wird bei 'B<%D>' keine Länge angegeben, so wird die Länge anhand der " -"Formatanweisung für das Datum und dem aktuellen Tag bestimmt. Sind in der " -"Formatanweisung volle Wochentags- oder Monatsnamen enthalten, kann es " -"vorkommen, dass das Datum anderer Artikel länger als ermittelt ist. In " -"diesem Fall wird das Datum abgeschnitten dargestellt. Das tritt z. B. auf, " -"wenn der aktuelle Monat Mai ist und der Artikel, zu dem das Datum angezeigt " -"werden soll, im Dezember gepostet wurde. In solchen Fällen ist es sinnvoll, " -"die maximale Länge manuell zu ermitteln und in die Formatanweisung " -"einzutragen." - -#. type: Plain text -#: doc/tin.1:3281 -msgid "" -"In case the format string contains 'B<%G>' and 'B<%d>' and no length are " -"given, B determines the longest newsgroup name and uses this length for " -"'B<%G>'. The remaining space will used for 'B<%d>'." -msgstr "" -"Falls der Formatstring enthält 'B<%G>' und 'B<%d>' enthält und keine Länge " -"gegeben ist, bestimmt der längste Gruppenname die Länge für 'B<%G>.' Der " -"verbleibende Platz wird für 'B<%d>' verwendet." - -#. type: Plain text -#: doc/tin.1:3285 -msgid "" -"When the format string contains the specifier 'B<%F>' and 'B<%s>' resp. " -"'B<%T>' and no length are given, 'B<%F>' will use one third and 'B<%s>' " -"resp. 'B<%T>' will use two third of the available space." -msgstr "" -"Sind in der Formatanweisung 'B<%F>' und 'B<%s>' bzw. 'B<%T>' enthalten und " -"jeweils keine Längen angegeben, dann nimmt 'B<%F>' ein Drittel und 'B<%s>' " -"bzw. 'B<%T>' zwei Drittel des für beide zusammen verfügbaren Platzes ein." - -#. type: Plain text -#: doc/tin.1:3295 -msgid "" -"In addition, a minimum or a maximum screen width can be defined for each " -"item (except 'B<%%>'). In this case, the item will only be displayed when " -"the screen is wider resp. smaller than specified. This comes in handy to not " -"overload a small screen but have maximum information on a large screen. The " -"minimum screen width has to be specified by a positive number preceded by an " -"'B>', the maximum screenwidth has to be specified by a positive number " -"preceded by an 'B>'. In the following example B will display the " -"score only if the screen is wider than 100 characters: 'B<%E100S>'." -msgstr "" -"Weiterhin kann eine Mindest- oder Maximalbildschirmbreite pro Element (außer " -"'B<%%>') definiert werden. Das entsprechende Element wird dann erst " -"dargestellt, wenn auf dem Bildschirm mehr bzw. weniger Zeichen als angegeben " -"dargestellt werden können. Das ist hilfreich, um die Anzeige bei kleineren " -"Bildschirmen oder Terminalfenstern nicht zu überfrachten. Hier erfolgt die " -"Angabe vor dem den Platzhalter charakterisierenden Buchstaben durch eine " -"positive Zahl, welcher ein 'B>' bzw. 'B>' vorangestellt wird. " -"Soll z. B. der Bewertung erst ab einer Bildschirmbreite größer 100 Zeichen " -"angezeigt werden, lautet die Formatanweisung 'B<%E100S>'." - -#. type: Plain text -#: doc/tin.1:3309 -msgid "" -"If both the length and the minimum or maximum screen width should be " -"specified for an item, the length must be the first parameter and the " -"minimum or maximum screen width must be the second one. The following " -"example displays the score with a length of 10 characters only if the screen " -"is wider than 100 characters: 'B<%10E100S>'. A second length can be " -"specified for 'B<%F>' and 'B<%s>' resp. 'B<%T>', separated by a colon, which " -"is used if the minimum or maximum screen width is not reached. If no length " -"is specified after the colon, the item is displayed even if the minimum " -"screen width is not reached and the length is calculated as if no minimum " -"(or maximum) screen width had been specified. In the following example " -"B will display the subject with a length of 60 characters if the screen " -"is wider than 100 characters, otherwise a length of 40 characters is used: " -"'B<%60E100:40s>'." -msgstr "" -"Wenn eine Längenangabe und eine Mindest- oder Maximalbildschirmbreite " -"angegeben werden soll, muss zuerst die Länge und danach die Mindestbreite " -"oder Maximalbreite in der Formatanweisung stehen. Um die Bewertung 10 " -"Zeichen breit und erst ab einer Bildschirmbreite über 100 Zeichen " -"darzustellen, lautet die Anweisung 'B<%10E100S>'. Für 'B<%F>' und " -"'B<%s>' bzw. 'B<%T>' kann, getrennt durch einen Doppelpunkt, eine zweite " -"Länge angegeben werden, die verwendet wird, wenn die Mindestbildschirmbreite " -"nicht erreicht wird. Wird nach dem Doppelpunkt keine Länge angegeben, wird " -"der Eintrag auch bei Unterschreitung der Mindestbildschirmbreite angezeigt " -"und die Länge so berechnet, als wäre keine Mindestbildschirmbreite angegeben " -"worden. Im folgenden Beispiel zeigt B den Betreff mit einer Länge von " -"60 Zeichen an, wenn der Bildschirm breiter als 100 Zeichen ist, ansonsten " -"wird eine Länge von 40 Zeichen verwendet: 'B<%60E100:40s>'." - -#. type: Plain text -#: doc/tin.1:3313 -msgid "" -"The look of the Attachment level and the mime and uue header at Page level " -"can be customized too via format strings. The following variables are " -"available:" -msgstr "" -"Das Aussehen der Anhangsebene sowie der MIME- und UUEncode-Header auf " -"Artikelebene kann ebenfalls über Formatzeichenfolgen angepasst werden. Die " -"folgenden Variablen sind verfügbar:" - -#. type: ta -#: doc/tin.1:3316 -#, no-wrap -msgid "\\w'%G 'u +\\w'Complete/incomplete UUE part indicator'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3335 -#, no-wrap -msgid "" -"B<%C>\tCharset\n" -"B<%c>\tLike %C but with description\n" -"B<%D>\tLine count\n" -"B<%d>\tLike %D but with description\n" -"B<%E>\tContent encoding\n" -"B<%e>\tLike %E but with description\n" -"B<%I>\tComplete/incomplete UUE part indicator\n" -"B<%L>\tLanguage\n" -"B<%l>\tLike %L but with description\n" -"B<%N>\tName\n" -"B<%n>\tLike %N but with description\n" -"B<%S>\tContent subtype\n" -"B<%s>\tLike %S but with description\n" -"B<%T>\tContent type\n" -"B<%t>\tLike %T but with description\n" -"B<%Z>\tSize in bytes\n" -"B<%z>\tLike %Z but with description\n" -"B<%%>\t%\n" -msgstr "" -"B<%C>\tZeichensatz\n" -"B<%c>\tWie %C aber mit Beschreibung\n" -"B<%D>\tZeilenanzahl\n" -"B<%d>\tWie %D aber mit Beschreibung\n" -"B<%E>\tContent Kodierung\n" -"B<%e>\tWie %E aber mit Beschreibung\n" -"B<%I>\tKennzeichen für vollständige/unvollständige UUE-Teile\n" -"B<%L>\tSprache\n" -"B<%l>\tWie %L aber mit Beschreibung\n" -"B<%N>\tName\n" -"B<%n>\tWie %N aber mit Beschreibung\n" -"B<%S>\tContent Untertyp\n" -"B<%s>\tWie %S aber mit Beschreibung\n" -"B<%T>\tContent Typ\n" -"B<%t>\tWie %T aber mit Beschreibung\n" -"B<%Z>\tGröße in Bytes\n" -"B<%z>\tWie %Z aber mit Beschreibung\n" -"B<%%>\t%\n" - -#. type: Plain text -#: doc/tin.1:3340 -msgid "" -"Not all items can be used in each variable. The following table provides an " -"overview:" -msgstr "" -"Nicht alle Elemente können in jeder Variablen verwendet werden. Die folgende " -"Tabelle bietet einen Überblick:" - -#. type: ta -#: doc/tin.1:3343 -#, no-wrap -msgid "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" -msgstr "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" - -#. type: Plain text -#: doc/tin.1:3363 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%C>\tX\tX\n" -"B<%c>\tX\tX\n" -"B<%D>\tX\tX\tX\n" -"B<%d>\tX\tX\tX\n" -"B<%E>\tX\tX\tX\n" -"B<%e>\tX\tX\tX\n" -"B<%I>\t\t\tX\n" -"B<%L>\tX\tX\n" -"B<%l>\tX\tX\n" -"B<%N>\t\tX\tX\n" -"B<%n>\t\tX\tX\n" -"B<%S>\tX\tX\tX\n" -"B<%s>\tX\tX\tX\n" -"B<%T>\tX\tX\tX\n" -"B<%t>\tX\tX\tX\n" -"B<%Z>\tX\tX\tX\n" -"B<%z>\tX\tX\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" -"\tB\tB\tB\n" -"B<%C>\tX\tX\n" -"B<%c>\tX\tX\n" -"B<%D>\tX\tX\tX\n" -"B<%d>\tX\tX\tX\n" -"B<%E>\tX\tX\tX\n" -"B<%e>\tX\tX\tX\n" -"B<%I>\t\t\tX\n" -"B<%L>\tX\tX\n" -"B<%l>\tX\tX\n" -"B<%N>\t\tX\tX\n" -"B<%n>\t\tX\tX\n" -"B<%S>\tX\tX\tX\n" -"B<%s>\tX\tX\tX\n" -"B<%T>\tX\tX\tX\n" -"B<%t>\tX\tX\tX\n" -"B<%Z>\tX\tX\tX\n" -"B<%z>\tX\tX\tX\n" -"B<%%>\tX\tX\tX\n" - -#. type: Plain text -#: doc/tin.1:3377 -msgid "" -"By default, the string is not truncated. If it exceeds the screen width, it " -"is wrapped. If the % sign is followed by an exclamation mark ('!\\&') for " -"uppercase letters, the element is omitted if there is not enough space. If " -"the % sign is followed by an asterisk ('*') for a lowercase letter, the " -"description is omitted if there is not enough space. If the % sign is " -"followed by an exclamation mark ('!\\&') for a lowercase letter, the " -"description is omitted first and then the content. The shortening is always " -"from right to left, first the description is omitted and when no more " -"description is displayed, the content is omitted. If %T and %S follow each " -"other directly a '/' will be inserted in between. %Z will always have one " -"decimal point and may have a one letter bi-suffix." -msgstr "" -"Standardmäßig wird der String nicht abgeschnitten. Wenn er die " -"Bildschirmbreite überschreitet, wird er umgebrochen. Wenn dem % Zeichen ein " -"Ausrufezeichen ('!\\&') vor Großbuchstaben folgt, wird das Element " -"weggelassen, wenn nicht genügend Platz vorhanden ist. Wenn dem % Zeichen ein " -"Sternchen ('*') vor Kleinbuchstaben folgt, wird die Beschreibung " -"weggelassen, wenn nicht genügend Platz vorhanden ist. Wenn dem % Zeichen vor " -"einem Kleinbuchstaben ein Ausrufezeichen ('!\\&') folgt, wird zuerst die " -"Beschreibung und dann der Inhalt weggelassen. Das Kürzen erfolgt immer von " -"rechts nach links, zuerst wird die Beschreibung weggelassen, und wenn keine " -"Beschreibung mehr angezeigt wird, wird der Inhalt weggelassen. Wenn %T und " -"%S direkt aufeinander folgen, wird ein '/' dazwischen eingefügt. %Z hat " -"immer einen Dezimalpunkt und kann einen einbuchstabigen bi-Suffix haben." - -#. type: ta -#: doc/tin.1:3382 -#, no-wrap -msgid "\\w'attachment_format'u +\\w'\"B<%T%S%E%C%d>\"'u" -msgstr "\\w'attachment_format'u +\\w'\"B<%T%S%E%C%d>\"'u" - -#. type: Plain text -#: doc/tin.1:3386 -#, no-wrap -msgid "" -"B:\t\"B<%T%S%E%C%d>\"\n" -"B:\t\"B<[-- %T%S%*n%z%*l%!c%!d%*e --]>\"\n" -"B:\t\t\"B<[-- %T%S%*n%I%!d%*e --]>\"\n" -msgstr "" -"B:\t\"B<%T%S%E%C%d>\"\n" -"B:\t\"B<[-- %T%S%*n%z%*l%!c%!d%*e --]>\"\n" -"B:\t\t\"B<[-- %T%S%*n%I%!d%*e --]>\"\n" - -#. type: SS -#: doc/tin.1:3389 -#, no-wrap -msgid "TIPS AND TRICKS" -msgstr "TIPPS UND TRICKS" - -#. type: Plain text -#: doc/tin.1:3393 -msgid "" -"B can be pretty much be navigated by using the four cursor keys. The " -"left arrow key goes up a level, the right arrow key goes down a level, the " -"up arrow key goes up a line and the down arrow key goes down a line." -msgstr "" -"In B kann weitgehend mit den vier Cursortasten navigiert werden. Die " -"linke Pfeiltaste geht eine Ebene nach oben, die rechte Pfeiltaste eine Ebene " -"nach unten, die obere Pfeiltaste eine Zeile nach oben und die untere " -"Pfeiltaste eine Zeile nach unten." - -#. type: Plain text -#: doc/tin.1:3395 -msgid "" -"The following newsgroups provide useful information concerning news software:" -msgstr "" -"In den folgenden Newsgruppen finden sich nützliche Informationen über " -"Newssoftware:" - -#. type: Plain text -#: doc/tin.1:3398 -msgid "" -"\\(emnews.software.readers (info. about news user agents tin, rn, nn, slrn " -"etc.)" -msgstr "" -"\\(emde.comm.software.newsreader (Informationen über Newsreader wie tin, " -"slrn, ...)" - -#. type: Plain text -#: doc/tin.1:3400 -msgid "\\(emnews.software.nntp (info. about NNTP)" -msgstr "\\(emnews.software.nntp (Informationen über NNTP)" - -#. type: Plain text -#: doc/tin.1:3402 -msgid "" -"\\(emnews.answers (Frequently Asked Questions (FAQ) about many different " -"themes)" -msgstr "" -"\\(emnews.answers (Frequently Asked Questions (FAQ) verschiedenster Themen)" - -#. type: Plain text -#: doc/tin.1:3406 -msgid "" -"Many prompts within B offer a default choice that the cursor is " -"positioned on. By pressing 'BCRE>' the default value is taken. " -"Most prompts can be aborted by pressing 'BESCE>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3413 -msgid "" -"When B is run in an B<\\%xterm>(1x) it will resize itself each time " -"the B<\\%xterm>(1x) is resized." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3417 -msgid "" -"B will reread the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-" -"active}> file at set intervals (B) to show any " -"newly arrived news." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3422 -msgid "" -"If you find large number of new newsgroups cluttering up your screen, " -"pressing B ('B') will make them go away." -msgstr "" -"Falls Sie feststellen, dass eine große Anzahl neuer Newsgruppen den " -"Bildschirm füllt, können diese durch Drücken von B " -"('B') ausgeblendet werden." - -#. type: SS -#: doc/tin.1:3422 -#, no-wrap -msgid "XTERM BUTTONS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3428 -msgid "" -"If the environment variable B<$TERM> is set to B<\\%xterm>(1x), then button " -"pressing can be used to select groups and articles. In this discussion, the " -"buttons are assumed to be assigned conventionally (i.e., Button1 is the left " -"button)." -msgstr "" -"Falls die Umgebungsvariable B<$TERM> auf B<\\%xterm>(1x) gesetzt ist können " -"die Maustasten benutzt werden um Gruppen oder Artikel auszuwählen. Es wird " -"davon ausgegangen, dass die Maustasten normal zugeteilt sind (Maustaste1 ist " -"die linke Maustaste)." - -#. type: Plain text -#: doc/tin.1:3430 -msgid "In general (i.e., for the group, thread and article menus)," -msgstr "Im Allgemein (d. h. für die Gruppen-, Thread- und Artikelmenüs)," - -#. type: TP -#: doc/tin.1:3430 -#, no-wrap -msgid "Button1 (left)" -msgstr "Maustaste1 (Links)" - -#. type: Plain text -#: doc/tin.1:3433 -msgid "" -"enters next (lower) level if you click on an article, otherwise pages down." -msgstr "" -"Geht in die nächste (untere) Ebene, wenn Sie auf einen Artikel klicken, " -"sonst nach unten blättern." - -#. type: TP -#: doc/tin.1:3433 -#, no-wrap -msgid "Button2 (center)" -msgstr "Maustaste2 (Mitte)" - -#. type: Plain text -#: doc/tin.1:3437 -msgid "" -"returns to the previous (upper) level if you click on an article, otherwise " -"pages up." -msgstr "" -"kehrt zur vorherigen (oberen) Ebene zurück, wenn Sie auf einen Artikel " -"klicken, andernfalls wird eine Seite nach oben geblättert." - -#. type: TP -#: doc/tin.1:3437 -#, no-wrap -msgid "Button3 (right)" -msgstr "Maustaste3 (Rechts)" - -#. type: Plain text -#: doc/tin.1:3441 -msgid "" -"positions on the article line under mouse cursor, or pages down if you've " -"clicked outside the list of articles." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3443 -msgid "In the group selection menu, if the mouse is pointing at a group then:" -msgstr "Im Gruppenauswahlmenü, wenn die Maus auf eine Gruppe zeigt, dann:" - -#. type: TP -#: doc/tin.1:3443 doc/tin.1:3455 doc/tin.1:3469 -#, no-wrap -msgid "left button" -msgstr "Linke Maustaste" - -#. type: Plain text -#: doc/tin.1:3447 -msgid "" -"moves to and selects the group pointed at, just like B " -"('BCRE>')." -msgstr "" - -#. type: TP -#: doc/tin.1:3447 doc/tin.1:3459 doc/tin.1:3472 -#, no-wrap -msgid "center button" -msgstr "Mittlere Maustaste" - -#. type: Plain text -#: doc/tin.1:3450 -msgid "quits the program, just like B ('B')." -msgstr "Beendet das Programm, genau wie B ('B')." - -#. type: TP -#: doc/tin.1:3450 doc/tin.1:3464 doc/tin.1:3477 -#, no-wrap -msgid "right button" -msgstr "Rechte Maustaste" - -#. type: Plain text -#: doc/tin.1:3453 -msgid "moves to the group pointed at." -msgstr "springt zu der Gruppe, auf die gezeigt wird." - -#. type: Plain text -#: doc/tin.1:3455 -msgid "" -"In the article menu, if the mouse is pointing at an article (or thread) then:" -msgstr "" -"Wenn die Maus im Artikelmenü auf einen Artikel (oder Thread) zeigt, dann:" - -#. type: Plain text -#: doc/tin.1:3459 -msgid "" -"reads the article pointed at, just like B " -"('BCRE>'), or the thread, just like B ('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3464 -msgid "" -"exits the menu, catching up on the group if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3467 -msgid "moves to the article (or thread) pointed at." -msgstr "springt zu dem Artikel (oder Thread), auf den gezeigt wird." - -#. type: Plain text -#: doc/tin.1:3469 -msgid "In the thread menu, if the mouse is pointing at an article then:" -msgstr "Im Thread-Menü, wenn die Maus auf einen Artikel zeigt, dann:" - -#. type: Plain text -#: doc/tin.1:3472 -msgid "" -"reads article pointed at, just like B ('BCRE>')." -msgstr "" -"liest den Artikel, auf den verwiesen wird, genau wie B " -"('BCRE>')." - -#. type: Plain text -#: doc/tin.1:3477 -msgid "" -"exits the menu, catching up on the thread if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3480 -msgid "moves to the article pointed at." -msgstr "springt zu dem Artikel, auf den gezeigt wird." - -#. type: Plain text -#: doc/tin.1:3487 -msgid "" -"In other menus and areas button pressing reverts back to usual cut and paste " -"of B<\\%xterm>(1x), but after one click of any button." -msgstr "" - -#. type: SS -#: doc/tin.1:3487 -#, no-wrap -msgid "INDEX FILES" -msgstr "INDEX DATEIEN" - -#. type: Plain text -#: doc/tin.1:3492 -msgid "" -"If your news server supports NOV index files (see B<\\%newsoverview>(5), " -"most modern installations will) and you have a fast connection to your news " -"server then this section can be ignored." -msgstr "" -"Wenn Ihr Newsserver NOV-Indexdateien unterstützt (siehe B<\\" -"%newsoverview>(5), die meisten modernen Installationen tun dies) und Sie " -"eine schnelle Verbindung zu Ihrem Newsserver haben, können Sie diesen " -"Abschnitt ignorieren." - -#. type: Plain text -#: doc/tin.1:3499 -msgid "" -"If your news server doesn't support NOV index files or you have a very slow " -"connection to your news server then B can cache the index for each " -"newsgroup if B is set to ON. Note that this cache can " -"use up large amounts of disk space if you read a lot of groups and/or high " -"traffic groups. To reduce the amount of disk space used, " -"B can be set to ON." -msgstr "" -"Wenn Ihr Newsserver keine NOV-Indexdateien unterstützt oder Sie eine sehr " -"sehr langsame Verbindung zu Ihrem Newsserver haben, kann B den Index " -"für jede Newsgruppe zwischenspeichern wenn B auf ON " -"gesetzt ist. Beachten Sie, daß dieser Cache große Mengen an Speicherplatz " -"verbrauchen kann, wenn Sie sehr viele Gruppen und/oder Gruppen mit hohem " -"Datenverkehr lesen. Um Platz zu sparen kann B auf " -"ON gesetzt werden." - -#. type: Plain text -#: doc/tin.1:3508 -msgid "" -"Each user creates/updates his/her own index files that are stored in " -"I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news/>. If you " -"are reading via NNTP then the news server name will be appended to keep the " -"indexes for different servers separate. If you are reading off the local " -"spool and local overview files already exist then turning on caching will " -"have no effect. Likewise unless you see significant delays entering a group " -"when reading via NNTP then turning on caching will have little or no effect." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3515 -msgid "" -"Entering a group the first time tends to be slow because the index file must " -"be built from scratch. To alleviate the slowness start B to create all " -"index files for the groups you subscribe to with B and go for a " -"coffee. Subsequent readings of a group will only need to do incremental " -"updating of the index file and will be much faster as only new articles will " -"need to be cached." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3520 -msgid "" -"As indexing might take some time you may want to run B from the system " -"batcher B<\\%cron>(8) with the ''B<-u>'' option:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3525 -#, no-wrap -msgid "\\f(CR30 6 * * * /usr/local/bin/tin -u\\fR\n" -msgstr "\\f(CR30 6 * * * /usr/local/bin/tin -u\\fR\n" - -#. type: Plain text -#: doc/tin.1:3531 -msgid "" -"If you are low on local disk space you should consider to manually purge " -"cached data for groups you are not reading anymore with something like:" -msgstr "" -"Falls Sie wenig Platz auf der lokalen Festplatte haben, sollten Sie in " -"Betracht ziehen, zwischengespeicherte Daten für Gruppen, die Sie nicht mehr " -"lesen, manuell zu bereinigen:" - -#. type: Plain text -#: doc/tin.1:3537 -#, no-wrap -msgid "" -"\\f(CRfind ${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news* \\e\n" -"-type f -name \"[0-9]*.[0-9]\" -atime +28 | xargs rm -f\\fR\n" -msgstr "" -"\\f(CRfind ${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news* \\e\n" -"-type f -name \"[0-9]*.[0-9]\" -atime +28 | xargs rm -f\\fR\n" - -#. type: SH -#: doc/tin.1:3542 doc/tin.5:21 -#, no-wrap -msgid "FILES" -msgstr "DATEIEN" - -#. TODO: mention dead.article, dead.articles -#. .article[.$$], .cancel[.$$], .letter[.$$]? -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. $TMPDIR/GNKSA (-D 64) -#. type: Plain text -#: doc/tin.1:3561 -msgid "For a detailed description see B<\\%tin>(5)." -msgstr "Für eine ausführlich Beschreibung siehe B<\\%tin>(5)." - -#. TODO: mention -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.article -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.articles -#. ${TIN_HOMEDIR:\-"$HOME"}/.article[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.cancel[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.letter[.$$] -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. type: Plain text -#: doc/tin.1:3563 doc/tin.5:42 -msgid "I<$MAILCAPS>" -msgstr "I<$MAILCAPS>" - -#. type: Plain text -#: doc/tin.1:3565 doc/tin.5:44 -msgid "I<~/.mailcap>" -msgstr "I<~/.mailcap>" - -#. type: Plain text -#: doc/tin.1:3567 doc/tin.5:46 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3569 doc/tin.5:48 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3571 doc/tin.5:50 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3573 doc/tin.5:52 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3576 doc/tin.5:221 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3579 doc/tin.5:231 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret>" - -#. type: Plain text -#: doc/tin.1:3582 doc/tin.5:241 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.mime.types>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.mime.types>" - -#. type: Plain text -#: doc/tin.1:3584 doc/tin.5:243 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3586 doc/tin.5:245 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3589 doc/tin.5:252 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsauth>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsauth>" - -#. type: Plain text -#: doc/tin.1:3592 doc/tin.5:287 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" - -#. type: Plain text -#: doc/tin.1:3596 doc/tin.5:318 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/.oldnewsrc>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/.oldnewsrc>\n" - -#. type: Plain text -#: doc/tin.1:3600 doc/tin.5:326 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.signature>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.signature>" - -#. type: Plain text -#: doc/tin.1:3602 doc/tin.5:328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>" - -#. type: Plain text -#: doc/tin.1:3605 doc/tin.5:335 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.sigfixed>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.sigfixed>" - -#. type: Plain text -#: doc/tin.1:3608 doc/tin.5:342 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/.inputhistory>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/.inputhistory>" - -#. type: Plain text -#: doc/tin.1:3611 doc/tin.5:349 -msgid "I<${TIN_INDEX_MAILDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.mail/>" -msgstr "I<${TIN_INDEX_MAILDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.mail/>" - -#. type: Plain text -#: doc/tin.1:3615 doc/tin.5:357 -#, no-wrap -msgid "I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news${NNTPSERVER:+\"-$NNTPSERVER\"}/>\n" -msgstr "I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news${NNTPSERVER:+\"-$NNTPSERVER\"}/>\n" - -#. type: Plain text -#: doc/tin.1:3619 doc/tin.5:365 -msgid "I<${TIN_INDEX_SAVEDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.save/>" -msgstr "I<${TIN_INDEX_SAVEDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.save/>" - -#. type: Plain text -#: doc/tin.1:3622 doc/tin.5:372 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.mail>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.mail>" - -#. type: Plain text -#: doc/tin.1:3625 doc/tin.5:407 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.save>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.save>" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. ${TIN_LIBDIR\-/news/etc"}/attributes -#. type: Plain text -#: doc/tin.1:3629 doc/tin.5:418 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3631 doc/tin.5:420 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>" - -#. TODO: add missing descriptions and explain things in detail. -#. type: Plain text -#: doc/tin.1:3634 doc/tin.5:772 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter>" - -#. type: Plain text -#: doc/tin.1:3638 doc/tin.5:915 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/keymap${${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}:+\".${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}\"}>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/keymap${${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}:+\".${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}\"}>\n" - -#. type: Plain text -#: doc/tin.1:3640 doc/tin.5:917 -#, no-wrap -msgid "I\n" -msgstr "I\n" - -#. type: Plain text -#: doc/tin.1:3644 doc/tin.5:1163 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups>" - -#. type: Plain text -#: doc/tin.1:3647 doc/tin.5:1179 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>" - -#. type: Plain text -#: doc/tin.1:3650 doc/tin.5:1224 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>" - -#. type: Plain text -#: doc/tin.1:3653 doc/tin.5:1239 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/Mail/posted>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/Mail/posted>" - -#. type: Plain text -#: doc/tin.1:3656 doc/tin.5:1249 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/postponed.articles>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/postponed.articles>" - -#. type: Plain text -#: doc/tin.1:3660 doc/tin.5:1259 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/motd>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/motd>\n" - -#. type: Plain text -#: doc/tin.1:3665 doc/tin.5:1270 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/msglog>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/msglog>\n" - -#. type: Plain text -#: doc/tin.1:3670 doc/tin.5:1280 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/newsgroups>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/newsgroups>\n" - -#. type: Plain text -#: doc/tin.1:3675 doc/tin.5:1299 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/serverrc>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/serverrc>\n" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. .IR ${TIN_LIBDIR\-"/news/etc"}/tinrc -#. type: Plain text -#: doc/tin.1:3680 doc/tin.5:1326 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3682 doc/tin.5:1328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>" - -#. type: Plain text -#: doc/tin.1:3685 doc/tin.5:2629 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3688 -msgid "I" -msgstr "I" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths -#. (described shown below). -#. type: Plain text -#: doc/tin.1:3691 doc/tin.5:2739 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}>" - -#. type: Plain text -#: doc/tin.1:3694 doc/tin.5:2800 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/active.times>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/active.times>" - -#. type: Plain text -#: doc/tin.1:3697 doc/tin.5:2827 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups>" - -#. type: Plain text -#: doc/tin.1:3700 doc/tin.5:2850 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/organization>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/organization>" - -#. is the Path correct? or is it /news/etc/overview.fmt -#. type: Plain text -#: doc/tin.1:3703 doc/tin.5:2860 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt>" - -#. is the Path correct? or is it /news/etc/subscriptions -#. type: Plain text -#: doc/tin.1:3708 doc/tin.5:2878 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>" - -#. type: SH -#: doc/tin.1:3708 -#, no-wrap -msgid "ENVIRONMENT" -msgstr "UMGEBUNGSVARIABLEN" - -#. type: TP -#: doc/tin.1:3712 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3720 -msgid "" -"Define this variable if you want to specify command-line options that B " -"should be started with to save typing them each time it is started. The " -"contents of the environment variable are added to the front of the command-" -"line options before it is parsed therefore allowing an option specified on " -"the command-line to override the same option specified in the environment." -msgstr "" -"Setzen Sie diese Variable wenn Sie Kommandozeilenoptionen angeben möchten " -"mit denen B gestartet werden soll um die Eingabe, jedes Mal wenn B " -"ausgeführt wird, zu sparen. Der Inhalt der Umgebungsvariablen wird den " -"angegebenen Kommandozeilenoptionen vorangestellt \\(em bevor diese auf " -"Gültigkeit überprüft werden \\(em um Sie manuell übersteuern zu können." - -#. type: TP -#: doc/tin.1:3720 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3725 -msgid "" -"Define this variable if you do not want the I<.tin> directory in I<$HOME/>. " -"E.g., if you want all B's private files in I you would set " -"$B to I." -msgstr "" -"Setzen Sie diese Variable falls Sie das I<.tin> Verzeichnis nicht in I<$HOME/" -">haben möchten. Wenn Sie z.B. alle privaten Dateien von B in I haben möchten, setzen Sie $B auf I." - -#. type: TP -#: doc/tin.1:3725 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3731 -msgid "" -"Define this variable if you do not want the I<.news> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's news " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3731 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3737 -msgid "" -"Define this variable if you do not want the I<.mail> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's mail " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3737 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3743 -msgid "" -"Define this variable if you do not want the I<.save> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's save " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3743 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3748 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B is " -"running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3748 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3753 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3753 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3759 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is B (see above). If " -"B is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3759 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3765 -msgid "" -"Define this variable if you want to override the B filename " -"that was compiled into the B binary, default is I<.overview>. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3765 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3771 -msgid "" -"Define this variable if you want to override the B path " -"that was compiled into the B binary. If B is running in NNTP mode " -"setting this variable has no effect. If $B is set it is " -"prepended to $B." -msgstr "" -"Setzen Sie diese Variable, wenn Sie den B-Pfad " -"überschreiben wollen, der in das B-Binary einkompiliert wurde. Falls " -"B im NNTP-Modus läuft, hat diese Variable keine Auswirkung. Sollte " -"$B gesetzt sein wird es $B vorangestellt." - -#. type: TP -#: doc/tin.1:3771 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3777 -msgid "" -"The default NNTP server to remotely read news from. This variable only needs " -"to be set if the ''B<-r>'' command-line option is specified and the file I does not exist. The ''B<-g>'' command line option overrides " -"$B." -msgstr "" - -#. type: TP -#: doc/tin.1:3777 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3782 -msgid "" -"The NNTP TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 119 (the default). The ''B<-p>'' command-line option " -"does override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3782 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3787 -msgid "" -"The NNTPS TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 563 (the default). The ''B<-p>'' and ''B<-T>'' command-" -"line options do override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3787 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3791 -msgid "" -"Set the article header field ''Distribution:'' to the contents of the " -"variable instead of the system default." -msgstr "" -"Setzen den Artikel-Header ''Distribution:'' auf den Inhalt der Variablen " -"statt auf den Systemstandard." - -#. type: TP -#: doc/tin.1:3791 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3795 -msgid "" -"Set the ISO to ASCII charset decoding table character to use in decoding an " -"article text. Values can range from -1 to 6." -msgstr "" -"Auswahl einer ISO-zu-ASCII-Zeichensatz-Dekodierungstabelle für die " -"Dekodierung des Artikeltextes. Die Werte können von -1 bis 6 reichen." - -#. type: TP -#: doc/tin.1:3796 -#, no-wrap -msgid "B<-1>" -msgstr "B<-1>" - -#. type: Plain text -#: doc/tin.1:3799 -msgid "no conversion" -msgstr "Keine Umformung" - -#. type: Plain text -#: doc/tin.1:3802 -msgid "universal table for many languages" -msgstr "Universal-Tabelle für viele Sprachen" - -#. type: Plain text -#: doc/tin.1:3805 -msgid "single-spacing universal table" -msgstr "Universal-Tabelle mit einfachem Abstand" - -#. type: Plain text -#: doc/tin.1:3808 -msgid "table for Danish, Dutch, German, Norwegian and Swedish" -msgstr "" -"Tabelle für Dänisch, Niederländisch, Deutsch, Norwegisch und Schwedisch" - -#. type: Plain text -#: doc/tin.1:3812 -msgid "" -"table for Danish, Finnish, Norwegian and Swedish using the appropriate ISO " -"646 variant" -msgstr "" -"Tabelle für Dänisch, Finnisch, Norwegisch und Schwedisch mit der " -"entsprechenden ISO 646-Variante" - -#. type: Plain text -#: doc/tin.1:3815 -msgid "table with B codes in brackets" -msgstr "Tabelle mit B-Codes in Klammern" - -#. type: TP -#: doc/tin.1:3815 -#, no-wrap -msgid "B<5>" -msgstr "B<5>" - -#. type: Plain text -#: doc/tin.1:3818 -msgid "table for printers that allow overstriking with backspace" -msgstr "Tabelle für Drucker, die es erlauben, mit Backspace zu überschreiben" - -#. type: TP -#: doc/tin.1:3818 -#, no-wrap -msgid "B<6>" -msgstr "B<6>" - -#. type: Plain text -#: doc/tin.1:3821 -msgid "table for IBM PC character set (code page 437)" -msgstr "Tabelle für IBM PC-Zeichensatz (Codepage 437)" - -#. type: TP -#: doc/tin.1:3822 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3829 -msgid "" -"Set the article header field ''Organization:'' to the contents of the " -"variable instead of the system default. If it points to a readable file a " -"random line from that file will be used. If reading news on an Apollo " -"DomainOS machine the environment variable $B has to be used instead " -"of $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3832 -msgid "DomainOS specific, same as $B on other OSs (see above)." -msgstr "" -"DomainOS spezifisch, wie $B auf anderen Betriebssystemen " -"(siehe oben)." - -#. type: TP -#: doc/tin.1:3832 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3837 -msgid "" -"Set the article header field ''Reply-To:'' to the return address specified " -"by the variable. This is useful if you wish to receive replies at a " -"different address." -msgstr "" -"Setzt die ''Reply-To:''-Kopfzeile auf die in der Variable angegebene " -"Rücksendeadresse. Dies ist nützlich, wenn Sie Antworten an eine andere " -"Adresse erhalten möchten." - -#. type: TP -#: doc/tin.1:3837 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3841 -msgid "" -"Overrides the full name given in the gecos-field in I, see also " -"B." -msgstr "" -"Überschreibt den vollständigen Namen, der im Geos-Feld in I " -"angegeben ist, siehe auch B." - -#. type: TP -#: doc/tin.1:3841 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3844 -msgid "Same as $B." -msgstr "Bewirkt das Gleiche wie $B." - -#. type: TP -#: doc/tin.1:3844 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3849 -msgid "" -"Pathname of the user's home directory. See B<\\%environ>(5) for more info." -msgstr "" -"Das Anmeldeverzeichnis des Benutzers. Weitere Informationen finden sich in " -"B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3849 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3853 -msgid "" -"This variable has precedence over the default mailer that is used in all " -"mailing operations within B." -msgstr "" -"Diese Variable hat Vorrang vor dem Standard-Mailer, der bei allen " -"Versandoperationen innerhalb von B verwendet wird." - -#. type: TP -#: doc/tin.1:3853 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3856 -msgid "Full path to the user's mailbox." -msgstr "Voller Pfad zum Postfach des Benutzers." - -#. we don't support the %message || ?message notation -#. type: TP -#: doc/tin.1:3856 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3861 -msgid "" -"A colon-separated list of filenames which are checked for new mail. This " -"overrides the $B variable." -msgstr "" -"Eine durch Doppelpunkte getrennte Liste von Dateinamen, die auf neue E-Mails " -"überprüft werden. Übersteuert die Variable $B." - -#. type: TP -#: doc/tin.1:3861 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3870 -msgid "" -"This variable has precedence over the default editor (i.e., B<\\%vi>(1)) " -"that is used in all editing operations within B (e.g., posting, " -"replying, follow-ups, ...). Evaluation order is I<${VISUAL:-\"${EDITOR:-" -"vi}\"}>. See B<\\%environ>(5) for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3870 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3879 -msgid "" -"If $B is unset, then this variable is looked up for a default " -"editor. If $B and $B are both unset, B uses the systems " -"default editor (i.e. B<\\%vi>(1) on UNIX-systems). See B<\\%environ>(5) " -"for more info." -msgstr "" -"Falls $B nicht gesetzt ist, wird in dieser Variablen nach einem " -"Standard-Editor gesucht. Wenn $B und $B beide nicht gesetzt " -"sind verwendet B den Standard-Editor des Systems (B<\\%vi>(1) bei UNIX-" -"Systemen). Weitere Informationen finden sich in B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3879 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3885 -msgid "" -"A new group is checked against the list of patterns; if it matches, B " -"subscribes the user to the group without further query. See the section " -"\"NEWSGROUP LISTS & WILDCARDS\" for an explanation of the valid syntax. For " -"example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3887 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3892 -msgid "" -"will automatically subscribe the user to all new groups in the comp.os.unix " -"hierarchy, and all talk groups other than talk.politics groups (which will " -"be queried for as usual). Of course this does not work if B is started " -"with the ''B<-X>'' command-line switch." -msgstr "" - -#. type: TP -#: doc/tin.1:3892 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3896 -msgid "" -"Is handled like the $B variable, but groups matching the list " -"are unsubscribed from without further query. For example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3898 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3902 -msgid "" -"will automatically unsubscribe the user from all new alt.flame groups and " -"all groups starting with u (university groups) other than UK groups (which " -"will be queried for as usual)." -msgstr "" -"wird den Benutzer automatisch von allen neuen alt.flame-Gruppen und allen " -"Gruppen die mit u beginnen (Universitätsgruppen), mit Ausnahme von UK-" -"Gruppen (die wie gewohnt abgefragt werden), abmelden." - -#. type: TP -#: doc/tin.1:3902 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3906 -msgid "" -"A pathname of a directory made available for B to create temporary " -"files." -msgstr "" -"Pfadname eines Verzeichnisses, das B für die Erstellung temporärer " -"Dateien zur Verfügung gestellt wird." - -#. type: TP -#: doc/tin.1:3906 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3912 -msgid "" -"This variable can be used to override the default path search for B<\\" -"%mailcap>(5) files. See also B<\\%tin>(5)." -msgstr "" -"Diese Variable kann verwendet werden, um den Standard-Suchpfad für B<\\" -"%mailcap>(5)-Dateien zu überschreiben. Siehe auch B<\\%tin>(5)." - -#. type: TP -#: doc/tin.1:3912 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3917 -msgid "" -"Set this variable to disable the use of B<\\%metamail>(1) or a replacement " -"(e.g., metamutt)." -msgstr "" -"Setzen Sie diese Variable, um die Verwendung von B<\\%metamail>(1) oder " -"einen Ersatz (z. B. metamutt) zu unterdrücken." - -#. type: TP -#: doc/tin.1:3917 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3921 -msgid "" -"MIME character set used if not configured via the tinrc variable " -"B." -msgstr "" -"Benutzter MIME-Zeichensatz, falls nicht über die tinrc-Variable " -"B konfiguriert." - -#. type: TP -#: doc/tin.1:3921 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3926 -msgid "" -"Set this variable to point to B<\\%ispell>(1) or a replacement and its cmd-" -"line options." -msgstr "" - -#. type: TP -#: doc/tin.1:3926 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3933 -msgid "" -"Define any additional options that you wish to pass to your B<\\%pgp>(1) or " -"B<\\%gpg>(1) program." -msgstr "" -"Zusätzliche Optionen, die Sie an Ihr B<\\%pgp>(1)- oder B<\\%gpg>(1)-" -"Programm übergeben möchten." - -#. type: TP -#: doc/tin.1:3933 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3938 -msgid "" -"Override the name of the B<\\%pgp>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" -"Übersteuert den Namen des B<\\%pgp>(1)-Verzeichnisses in B<$HOME>, dass " -"deine Schlüssel usw. enthält." - -#. type: TP -#: doc/tin.1:3938 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3943 -msgid "" -"Override the name of the B<\\%gpg>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" -"Übersteuert den Namen des B<\\%gpg>(1)-Verzeichnisses in B<$HOME>, dass " -"deine Schlüssel usw. enthält." - -#. type: TP -#: doc/tin.1:3943 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3955 -msgid "" -"This variable determines the B<\\%locale>(5) category for character " -"handling functions. Usually it determines the character classes for pattern " -"matching character classification and case conversion. Currently this is not " -"true for B (which temporary unsets B<$LC_CTYPE> right before any match " -"is done to avoid confusion). Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%environ>(5) " -"for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3955 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3964 -msgid "" -"Formats of informative and diagnostic messages and interactive responses. " -"Its value should be of the form I[I<_territory>][I<.codeset>]" -"[I<@modifier>]. See B<\\%locale>(5) and B<\\%environ>(5) for more " -"information." -msgstr "" -"Datums- und Zeitformate. Ihr Wert sollte der Form I[I<_territory>]" -"[I<.codeset>][I<@modifier>] entsprechen. Für weitere Informationen siehe B<\\" -"%locale>(5) und B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3964 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3972 -msgid "" -"Numeric value formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" -"Formate für numerische Werte. Ihr Wert sollte der Form " -"I[I<_territory>][I<.codeset>][I<@modifier>] entsprechen. Für " -"weitere Informationen siehe B<\\%locale>(5) und B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3972 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3980 -msgid "" -"Date and time formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" -"Datums- und Zeitformate. Ihr Wert sollte der Form I[I<_territory>]" -"[I<.codeset>][I<@modifier>] entsprechen. Für weitere Informationen siehe B<\\" -"%locale>(5) und B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3980 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3989 -msgid "" -"This variable overrides the value of the B<$LANG> variable and any other " -"B<$LC_> variable. Its value should be of the form I[I<_territory>]" -"[I<.codeset>]. See B<\\%locale>(5) and B<\\%environ>(5) for more " -"information." -msgstr "" -"Datums- und Zeitformate. Ihr Wert sollte der Form I[I<_territory>]" -"[I<.codeset>][I<@modifier>] entsprechen. Für weitere Informationen siehe B<\\" -"%locale>(5) und B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3989 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3998 -msgid "" -"This variable determines the B<\\%locale>(5) category for any category not " -"specifically selected with a variable starting with B<$LC_>. Its value " -"should be of the form I[I<_territory>][I<.codeset>]. See B<\\" -"%environ>(5) for more information." -msgstr "" -"Datums- und Zeitformate. Ihr Wert sollte der Form I[I<_territory>]" -"[I<.codeset>][I<@modifier>] entsprechen. Für weitere Informationen siehe B<\\" -"%locale>(5) und B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:3998 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4006 -msgid "" -"This variable defines a priority list for translations. Whenever a " -"translation is not available the next language from the list is tried. Its " -"value should be of the form I. Requires " -"B<$LC_ALL> or B<$LANG> to be set. See B<\\%environ>(5) for more information." -msgstr "" -"Datums- und Zeitformate. Ihr Wert sollte der Form I[I<_territory>]" -"[I<.codeset>][I<@modifier>] entsprechen. B<$LC_ALL> der B<$LANG> muss " -"ebenfalls gesetzt sein. Für weitere Informationen siehe B<\\%locale>(5) und " -"B<\\%environ>(5)." - -#. type: TP -#: doc/tin.1:4006 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4016 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred width in " -"column positions for the terminal screen or window. If this variable is " -"unset or null, the implementation determines the number of columns, " -"appropriate for the terminal or window. When B<$COLUMNS> is set, any " -"terminal-width information implied by B<$TERM> will be overridden. Users and " -"portable applications should not set B<$COLUMNS> unless they wish to " -"override the system selection and produce output unrelated to the terminal " -"characteristics." -msgstr "" - -#. type: TP -#: doc/tin.1:4016 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4026 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred number of " -"lines on a page or the vertical screen or window size in lines. A line in " -"this case is a vertical measure large enough to hold the tallest character " -"in the character set being displayed. If this variable is unset or null, the " -"implementation determines the number of lines, appropriate for the terminal " -"or window. When B<$LINES> is set, any terminal-height information implied by " -"B<$TERM> will be overridden. Users and portable applications should not set " -"B<$LINES> unless they wish to override the system selection." -msgstr "" - -#. type: TP -#: doc/tin.1:4026 -#, no-wrap -msgid "B" -msgstr "B" - -# -# -#. type: Plain text -#: doc/tin.1:4032 -msgid "" -"The type of terminal in use. This is used when looking up termcap " -"sequences. See B<\\%environ>(5) for more information." -msgstr "" -"Der verwendete Terminaltyp. Weitere Informationen finden sich in B<\\" -"%environ>(5)." - -#. type: TP -#: doc/tin.1:4032 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4035 -msgid "Display name, pointing to the X server; required for xface." -msgstr "Anzeigename der auf den X-Server zeigt; erforderlich für xface." - -#. type: TP -#: doc/tin.1:4035 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4039 -msgid "" -"Used for determining terminal's X window id; required for xface. Should be " -"set by the terminal emulator." -msgstr "" -"Wird verwendet, um die X-Window-ID des Terminal zu bestimmen. Erforderlich " -"für xface. Sollte vom Terminalemulator gesetzt werden." - -#. type: TP -#: doc/tin.1:4039 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4043 -msgid "" -"The pathname of the user's login shell. Used to set B." -msgstr "" -"Der Pfadname der Login-Shell des Benutzers. Dient zum Setzen von " -"B." - -#. type: TP -#: doc/tin.1:4043 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4048 -msgid "" -"The pathname of the user's dir to put non-essential run time files into." -msgstr "" -"Pfadname des Verzeichnisses, in dem nicht zwingend benötigte Laufzeitdateien " -"abgelegt werden sollen." - -#. type: SH -#: doc/tin.1:4048 -#, no-wrap -msgid "SIGNALS" -msgstr "SIGNALE" - -#. TODO: add missing, sort useful, document in detail -#. type: Plain text -#: doc/tin.1:4052 -msgid "B handles a couple of signals:" -msgstr "B verarbeitet folgende Signale:" - -#. type: TP -#: doc/tin.1:4052 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4055 doc/tin.1:4058 -msgid "Terminate gracefully." -msgstr "Sauber beenden." - -#. type: TP -#: doc/tin.1:4055 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:4058 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4061 -msgid "Terminate gracefully but do not restore terminal (tty)." -msgstr "Beenden ohne das Terminal (tty) wiederherzustellen." - -#. type: TP -#: doc/tin.1:4061 -#, no-wrap -msgid "B" -msgstr "B" - -# -# -#. .SH DIAGNOSTICS -#. give an overview of the most common error messages and how to cope with -#. them. -#. type: Plain text -#: doc/tin.1:4072 -msgid "Write out I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>-file." -msgstr "Speichern der I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>-Datei." - -#. type: SH -#: doc/tin.1:4072 -#, no-wrap -msgid "SECURITY" -msgstr "SICHERHEIT" - -#. type: Plain text -#: doc/tin.1:4078 -msgid "" -"If B is started in debug mode (''B<-D n>'') it will create world " -"readable files in B<$TMPDIR> which may contain sensitive data like the users " -"NNTP password in cleartext (if running verbose). On multiuser-systems " -"B<$TMPDIR> should be set to a safe location before starting B in " -"(verbose) debug mode (e.g., B)." -msgstr "" -"Falls B im Debug-Modus (''B<-D n>'') gestartet wird, werden in " -"B<$TMPDIR> für alle Benutzer lesbare Dateien erzeugt, welche das NNTP-" -"Passwort des aktuellen Benutzers im Klartext enthalten können (falls Verbose " -"angeschaltet ist). Auf Multiuser-Systemen sollte daher $TMPDIR auf einen " -"sicheren Speicherort gesetzt werden, bevor B im (verbosen) Debug-Modus " -"gestartet wird (z. B. B)." - -#. type: Plain text -#: doc/tin.1:4082 -msgid "" -"Using the ''B<-k>'' option to skip certificate verification makes the " -"session insecure as the server's certificate is not checked; avoid this " -"option whenever possible." -msgstr "" -"Die Verwendung der Option ''B<-k>'' zum Überspringen der " -"Zertifikatsüberprüfung macht die Sitzung unsicher, da das Zertifikat des " -"Servers nicht überprüft wird; Vermeiden Sie diese Option nach Möglichkeit." - -#. type: Plain text -#: doc/tin.1:4089 -msgid "" -"If the server does not initially require authentication but supports " -"compression and compression is requested, B will exit when " -"authentication is required later on. Using the ''B<-A>'' command line option " -"in conjunction with ''B<-C>'' circumvents this behavior." -msgstr "" -"Falls der Server anfangs keine Authentifizierung verlangt, aber " -"Komprimierung unterstützt und Komprimierung angefordert wird, beendet sich " -"B falls später eine Authentifizierung verlangt wird. Durch Benutzung " -"der Befehlszeilenoption ''B<-A>'' in Verbindung mit ''B<-C>'' kann dieses " -"Verhalten umgangen werden." - -#. type: SH -#: doc/tin.1:4089 -#, no-wrap -msgid "CONFORMING TO" -msgstr "KONFORM ZU" - -#. - RFC\%2045, RFC\%2047, RFC\%2231, RFC\%2980, RFC\%3977, RFC\%4155 -#. RFC\%4643, RFC\%5322, RFC\%5536, RFC\%5537, RFC\%6048 or whatever -#. type: Plain text -#: doc/tin.1:4097 -msgid "" -"B does conform to the Base Definitions volume of IEEE Std 1003.1-2008, " -"Section 12, Utility Conventions (Utility Argument Syntax, Utility Syntax " -"Guidelines)." -msgstr "" -"B ist konform zu dem Basisdefinitionsband von IEEE Std 1003.1-2008, " -"Abschnitt 12, Utility-Konventionen (Utility Argument Syntax, Utility Syntax " -"Guidelines)." - -#. type: SH -#: doc/tin.1:4097 -#, no-wrap -msgid "NOTES" -msgstr "ANMERKUNGEN" - -#. type: Plain text -#: doc/tin.1:4104 -msgid "" -"Regular expression support is provided by the PCRE library package B<\\" -"%pcre>(3) or B<\\%pcre2>(3) which is open source software, written by " -"Philip Hazel, and copyright \\(co by the University of Cambridge, England." -msgstr "" -"Unterstützung für reguläre Ausdrücke wird durch die PCRE-Bibliothek B<\\" -"%pcre>(3) oder B<\\%pcre2>(3) bereitgestellt welche Open-Source-Software " -"ist. Autor ist Philip Hazel und das Urheberrecht \\(co liegt bei der " -"University of Cambridge, England." - -#. type: Plain text -#: doc/tin.1:4108 -msgid "Ehttps://www.pcre.org/E" -msgstr "Ehttps://www.pcre.org/E" - -#. type: SH -#: doc/tin.1:4108 -#, no-wrap -msgid "BUGS" -msgstr "FEHLER" - -#. type: Plain text -#: doc/tin.1:4116 -msgid "" -"B\\0NNTPd, B<\\%noffle>(1) (E= V1.0-pre5) and B " -"(E= V1.1.91) can't handle pipelined GROUP commands (B). If " -"you run into trouble with any of the mentioned historical servers define " -"DISABLE_PIPELINING in include/autoconf.h and recompile." -msgstr "" -"B\\0NNTPd, B<\\%noffle>(1) (E= V1.0-pre5) und B " -"(E= V1.1.91) können nicht mit gepipelinten GROUP-Befehlen (B) umgehen. Falls Sie Probleme mit einem der genannten historischen " -"Server haben, definieren Sie DISABLE_PIPELINING in include/autoconf.h und " -"kompilieren Sie das Programm neu." - -#. type: Plain text -#: doc/tin.1:4123 -msgid "" -"Using the ''B<-C>'' (COMPRESS) flag with B\\0nnrpd versions between " -"2.6.1 and 2.7.1 (both incl.) may cause B to hang and later timeout when " -"posting. This has been fixed in B\\0nnrpd version 2.7.2. As a " -"workaround simply don't use ''B<-C>''." -msgstr "" -"Die Verwendung des ''B<-C>'' (COMPRESS)-Flags mit B-Versionen zwischen " -"2.6.1 und 2.7.1 (beide einschl.) kann dazu führen, dass B beim Posten " -"hängt und sich mit einem Timeout beendet. Dies wurde in der B-Version " -"2.7.2 behoben. Als Workaround verwenden Sie einfach kein ''B<-C>''." - -#. type: Plain text -#: doc/tin.1:4132 -msgid "" -"Before mailing a bug-report to Etin-bugs@tin.orgE please check if " -"you are using the latest (stable) release, and if not, please upgrade first! " -"Have a look at the doc/TODO file for known bugs. If you still think you've " -"found a bug, please use the B ('B') function and write in " -"English. Please do NOT enclose a core-file in your bug-report until we " -"request it." -msgstr "" -"Bevor Sie einen Bug-Report an Etin-bugs@tin.orgE schicken, " -"überprüfen Sie bitte, ob die aktuellste (stabile) Version verwendet wird, " -"falls nicht, bitte erst aktualisieren! Sehen Sie sich die doc/TODO-Datei für " -"bekannte Fehler an. Wenn Sie immer noch meinen einen Fehler gefunden zu " -"haben benutzen Sie bitte die Funktion B ('B') und schreiben " -"auf Englisch. Bitte fügen Sie Ihrem Bug-Report KEINE Core-Datei bei \\(em " -"außer wir haben diese angefordert." - -#. type: SH -#: doc/tin.1:4132 -#, no-wrap -msgid "HISTORY" -msgstr "GESCHICHTE" - -#. type: Plain text -#: doc/tin.1:4141 -msgid "" -"B is based on the B<\\%tass>(1) newsreader that was developed by Rich " -"Skrenta and posted to alt.sources in March 1991; its first version was " -"released on August 23rd 1991. B<\\%tass>(1) itself was heavily influenced " -"by notesfiles a public domain UNIX version of PLATO Notes, developed at the " -"University of Illinois by Ray Essick and Rob Kolstad in 1982. For a version " -"overview see" -msgstr "" -"B basiert auf B<\\%tass>(1), einem Newsreader der von Rich Skrenta " -"entwickelt und dessen Code im März 1991 von ihm in alt.sources " -"veröffentlicht wurde. Die erste Version von B wurde am 23. August 1991 " -"veröffentlicht. B<\\%tass>(1) orientiert sich stark an notesfiles, einer " -"Public Domain Version für UNIX von PLATO Notes, welches 1982 von Ray Essick " -"und Rob Kolstad an der University of Illinois entstand. Eine Übersicht der " -"Versionen findet sich unter" - -#. type: Plain text -#: doc/tin.1:4145 -msgid "Ehttp://www.tin.org/history.htmlE." -msgstr "Ehttp://www.tin.org/history.htmlE." - -#. type: SH -#: doc/tin.1:4145 -#, no-wrap -msgid "CREDITS" -msgstr "DANKSAGUNGEN" - -#. type: IP -#: doc/tin.1:4146 -#, no-wrap -msgid "Rich Skrenta" -msgstr "Rich Skrenta" - -#. type: Plain text -#: doc/tin.1:4150 -msgid "author of B<\\%tass>(1) v3.2 which this newsreader used as its base." -msgstr "Autor von B<\\%tass>(1) v3.2, der Basis für diesen Newsreader." - -#. type: IP -#: doc/tin.1:4150 -#, no-wrap -msgid "Bill Davidsen" -msgstr "Bill Davidsen" - -#. type: Plain text -#: doc/tin.1:4152 -msgid "author of envarg.c environment variable reading routine." -msgstr "Autor von envarg.c, Umgebungsvariablenleseroutine." - -#. type: IP -#: doc/tin.1:4152 -#, no-wrap -msgid "Mike Gleason" -msgstr "Mike Gleason" - -#. type: Plain text -#: doc/tin.1:4154 -msgid "author of sigfile.c random signature generation routines." -msgstr "Autor von sigfile.c, Zufallssignaturengenerierungsroutine." - -#. type: IP -#: doc/tin.1:4154 -#, no-wrap -msgid "Markus Kuhn EMarkus.Kuhn@cl.cam.ac.ukE" -msgstr "Markus Kuhn EMarkus.Kuhn@cl.cam.ac.ukE" - -#. type: Plain text -#: doc/tin.1:4156 -msgid "" -"author of langinfo.c, charset.c and iso2asc.txt ISO-8859-1 documentation." -msgstr "" -"Autor von langinfo.c, charset.c und der iso2asc.txt ISO-8859-1 Dokumentation." - -#. type: IP -#: doc/tin.1:4156 -#, no-wrap -msgid "Arnold D. Robbins" -msgstr "Arnold D. Robbins" - -#. type: Plain text -#: doc/tin.1:4158 -msgid "author of strftime.c date formatting routine." -msgstr "Autor von strftime.c, Datumsfromatierungsroutine." - -#. type: IP -#: doc/tin.1:4158 -#, no-wrap -msgid "Rich Salz" -msgstr "Rich Salz" - -#. type: Plain text -#: doc/tin.1:4160 -msgid "" -"author of wildmat.c pattern matching and parsdate.y date parsing routines." -msgstr "" -"Autor von wildmat.c Mustervergleichs- und parsdate.y Datumsanalyseroutinen." - -#. type: IP -#: doc/tin.1:4160 -#, no-wrap -msgid "Dave Taylor" -msgstr "Dave Taylor" - -#. type: Plain text -#: doc/tin.1:4164 -msgid "author of curses.c from the B<\\%elm>(1) mailreader." -msgstr "Autor von curses.c aus dem Mailreader B<\\%elm>(1)." - -#. type: IP -#: doc/tin.1:4164 -#, no-wrap -msgid "Chris Thewalt" -msgstr "Chris Thewalt" - -#. type: Plain text -#: doc/tin.1:4168 -msgid "author of getline.c B<\\%emacs>(1) style editing routine." -msgstr "Autor von getline.c, B<\\%emacs>(1)-artige Eingaberoutine." - -#. type: IP -#: doc/tin.1:4168 -#, no-wrap -msgid "Steven Madsen" -msgstr "Steven Madsen" - -#. type: Plain text -#: doc/tin.1:4172 -msgid "for adding B<\\%pgp>(1) (Pretty Good Privacy) support." -msgstr "für B<\\%pgp>(1) (Pretty Good Privacy) Unterstützung." - -#. type: IP -#: doc/tin.1:4172 -#, no-wrap -msgid "Philip Hazel Eph10@cam.ac.ukE" -msgstr "Philip Hazel Eph10@cam.ac.ukE" - -#. type: Plain text -#: doc/tin.1:4177 -msgid "" -"for B<\\%pcre>(3), B<\\%pcre2>(3) (Perl-compatible regular expression " -"library)." -msgstr "" -"für B<\\%pcre>(3), B<\\%pcre2>(3) (Bibliothek für Perl-kompatible reguläre " -"Ausdrücke)." - -#. type: IP -#: doc/tin.1:4177 -#, no-wrap -msgid "Mark Martinec Emark.martinec@ijs.siE" -msgstr "Mark Martinec Emark.martinec@ijs.siE" - -#. type: Plain text -#: doc/tin.1:4185 -msgid "for B<\\%snprintf>(3) and B<\\%vsnprintf>(3) fallbacks." -msgstr "für B<\\%snprintf>(3) und B<\\%vsnprintf>(3) Fallbacks." - -#. type: SH -#: doc/tin.1:4185 -#, no-wrap -msgid "AUTHOR" -msgstr "AUTOR" - -#. type: TP -#: doc/tin.1:4186 -#, no-wrap -msgid "Iain Lea Eiain@bricbrac.deE" -msgstr "Iain Lea Eiain@bricbrac.deE" - -#. type: SH -#: doc/tin.1:4190 -#, no-wrap -msgid "MAINTAINER" -msgstr "" - -#. type: TP -#: doc/tin.1:4191 -#, no-wrap -msgid "Urs Janssen Eurs@tin.orgE" -msgstr "Urs Janßen Eurs@tin.orgE" - -#. type: SH -#: doc/tin.1:4195 doc/tin.5:2890 -#, no-wrap -msgid "SEE ALSO" -msgstr "SIEHE AUCH" - -#. type: Plain text -#: doc/tin.1:4259 -msgid "" -"B<\\%elm>(1), B<\\%emacs>(1), B<\\%gpg>(1), B<\\%inews>(1), B<\\%ispell>(1), " -"B<\\%lp>(1), B<\\%lpr>(1), B<\\%metamail>(1), B<\\%mutt>(1), B<\\" -"%noffle>(1), B<\\%perl>(1), B<\\%perlre>(1), B<\\%pgp>(1), B<\\%rn>(1), B<\\" -"%sendmail>(1), B<\\%shar>(1), B<\\%slrnface>(1), B<\\%tass>(1), B<\\" -"%unshar>(1), B<\\%uudecode>(1), B<\\%vi>(1), B<\\%xterm>(1x), B<\\" -"%heapsort>(3), B<\\%iconv>(3), B<\\%iconv_open>(3), B<\\%nl_langinfo>(3), " -"B<\\%pcre>(3), B<\\%pcre2>(3), B<\\%pcrepattern>(3), B<\\%pcre2pattern>(3), " -"B<\\%qsort>(3), B<\\%snprintf>(3), B<\\%strftime>(3), B<\\%vsnprintf>(3), " -"B<\\%wildmat>(3), B<\\%environ>(5), B<\\%locale>(5), B<\\%mailcap>(5), B<\\" -"%mbox>(5), B<\\%mmdf>(5), B<\\%newsoverview>(5), B<\\%tin>(5), B<\\" -"%cron>(8), B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B" -msgstr "" -"B<\\%elm>(1), B<\\%emacs>(1), B<\\%gpg>(1), B<\\%inews>(1), B<\\%ispell>(1), " -"B<\\%lp>(1), B<\\%lpr>(1), B<\\%metamail>(1), B<\\%mutt>(1), B<\\" -"%noffle>(1), B<\\%perl>(1), B<\\%perlre>(1), B<\\%pgp>(1), B<\\%rn>(1), B<\\" -"%sendmail>(1), B<\\%shar>(1), B<\\%slrnface>(1), B<\\%tass>(1), B<\\" -"%unshar>(1), B<\\%uudecode>(1), B<\\%vi>(1), B<\\%xterm>(1x), B<\\" -"%heapsort>(3), B<\\%iconv>(3), B<\\%iconv_open>(3), B<\\%nl_langinfo>(3), " -"B<\\%pcre>(3), B<\\%pcre2>(3), B<\\%pcrepattern>(3), B<\\%pcre2pattern>(3), " -"B<\\%qsort>(3), B<\\%snprintf>(3), B<\\%strftime>(3), B<\\%vsnprintf>(3), " -"B<\\%wildmat>(3), B<\\%environ>(5), B<\\%locale>(5), B<\\%mailcap>(5), B<\\" -"%mbox>(5), B<\\%mmdf>(5), B<\\%newsoverview>(5), B<\\%tin>(5), B<\\" -"%cron>(8), B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B" - -#. type: Plain text -#: doc/tin.5:13 -msgid "tin, rtin - related files" -msgstr "tin, rtin - zugehörige Dateien" - -#. type: Plain text -#: doc/tin.5:20 -msgid "" -"This man page describes the various (config) files and their formats used by " -"the B<\\%tin>(1) newsreader. All files are expected to have unix style " -"('\\(rsn' aka LF) line endings." -msgstr "" -"Diese Handbuchseite beschreibt die vom Newsreader B<\\%tin>(1) benutzen " -"(Konfigurations)-Dateien und deren Formate. Alle Dateien sollten Unixartige " -"Zeilenenden ('\\(rsn' aka LF) haben." - -#. type: Plain text -#: doc/tin.5:61 -msgid "" -"B<\\%mailcap>(5) files as defined in B. The mailcap files are " -"read by B<\\%tin>(1) to determine how to display non-text messages at the " -"local site. Any line that starts with \"#\" is a comment. Blank lines are " -"ignored. Otherwise, each line defines a single mailcap entry for a single " -"content type. Long lines may be continued by ending them with a backslash " -"character, \"\\(rs\"." -msgstr "" -"B<\\%mailcap>(5)-Dateien, wie in B definiert. Die Mailcap-" -"Dateien werden von B<\\%tin>(1) gelesen, um zu bestimmen, wie Nicht-Text-" -"Nachrichten angezeigt werden können. Jede Zeile die mit \"#\" beginnt ist " -"ein Kommentar. Leerzeilen werden ignoriert. Andernfalls definiert jede Zeile " -"einen einzelnen Mailcap-Eintrag für einen Inhaltstyp. Lange Zeilen können " -"fortgesetzt werden, indem man sie mit einem Backslash-Zeichen \"\\(rs\" " -"beendet." - -#. type: Plain text -#: doc/tin.5:64 -msgid "" -"Each individual mailcap entry consists of a content-type specification, a " -"command to execute, and (possibly) a set of optional \"flag\" values." -msgstr "" -"Jeder einzelne Mailcap-Eintrag besteht aus einer Content-Typ-Spezifikation, " -"einem Befehl zum Ausführen und (möglicherweise) einem Satz optionaler " -"\"Flag\"-Werte." - -#. type: Plain text -#: doc/tin.5:69 -msgid "" -"The \"type\" field is simply any legal content type name. It is the string " -"that will be matched against the ''Content-Type:'' header to decide if this " -"is the mailcap entry that matches the current message. Additionally, the " -"type field may specify a subtype or a wildcard to match all subtypes." -msgstr "" -"Das Feld \"Typ\" ist ein beliebiger Name für einen legalen Inhaltstyp. Es " -"ist die Zeichenkette, die mit der ''Content-Type:''-Kopfzeile verglichen " -"wird, um zu entscheiden, ob dies der Mailcap-Eintrag ist, der der aktuellen " -"Nachricht entspricht. Zusätzlich kann das Feld Typ einen Subtyp oder einen " -"Platzhalter enthalten, der allen Subtypen entspricht." - -#. type: Plain text -#: doc/tin.5:75 -msgid "" -"The \"command\" field is any UNIX command and is used to specify the " -"interpreter for the given type of message. It will be passed to the shell " -"via the B<\\%system>(3) facility." -msgstr "" -"Das Feld \"command\" ist ein beliebiger UNIX-Befehl und wird verwendet, um " -"den Interpreter für den angegebenen Nachrichtentyp anzugeben. Es wird über " -"die B<\\%system>(3)-Funktion an die Shell übergeben." - -# -#. Two special codes can appear in the viewing command for objects of type -#. multipart (any subtype). These are "%n" and "%F". %n will be replaced by -#. the number of parts within the multipart object. %F will be replaced by a -#. series of arguments, two for each part, giving first the content-type and -#. then the name of the temporary file where the decoded part has been stored. -#. type: Plain text -#: doc/tin.5:92 -msgid "" -"Semicolons and backslashes within the command or any flag field must be " -"quoted with backslashes. If the field contains \"%s\", those two characters " -"will be replaced by the name of a file that contains the body of the " -"message. If it contains \"%t\", those two characters will be replaced by the " -"content-type field, including the subtype, if any. If it contains \"%{\" " -"followed by a parameter name and a closing \"}\", then all those characters " -"will be replaced by the value of the named parameter, if any, from the " -"\\&''Content-Type:'' header. Finally, if the field contains \"\\(rs%\", " -"those two characters will be replaced by a single \"%\" character." -msgstr "" - -#. type: Plain text -#: doc/tin.5:94 -msgid "Besides the type and command field the following \"flags\" are defined:" -msgstr "Neben dem Typ und dem Befehlsfeld sind folgende \"Flags\" definiert:" - -#. type: TP -#: doc/tin.5:94 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:104 -msgid "" -"The \"compose\" field may be used to specify a program that can be used to " -"compose a new body or body part in the given format. Its intended use is to " -"support mail composing agents that support the composition of multiple types " -"of mail using external composing agents. As with the view-command, the " -"semantics of program execution are operating system dependent. The result of " -"the composing program may be data that is not yet suitable for mail " -"transport \\(em that is, a Content-Transfer-Encoding may need to be applied " -"to the data." -msgstr "" - -#. type: TP -#: doc/tin.5:104 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:114 -msgid "" -"The \"composetyped\" field is similar to the \"compose\" field, but is to be " -"used when the composing program needs to specify the ''Content-Type:'' " -"header field to be applied to the composed data. The \"compose\" field is " -"simpler, and is preferred for use with existing (non-mail-oriented) programs " -"for composing data in a given format. The \"composetyped\" field is " -"necessary when the Content-Type information must include auxiliary " -"parameters, and the composition program must then know enough about mail " -"formats to produce output that includes the mail type information." -msgstr "" - -#. type: TP -#: doc/tin.5:114 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:120 -msgid "" -"The \"edit\" field may be used to specify a program that can be used to edit " -"a body or body part in the given format. In many cases, it may be identical " -"in content to the \"compose\" field, and shares the operating-system " -"dependent semantics for program execution." -msgstr "" - -#. type: TP -#: doc/tin.5:120 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:125 -msgid "" -"The \"print\" field may be used to specify a program that can be used to " -"print a message or body part in the given format. As with the view-command, " -"the semantics of program execution are operating system dependent." -msgstr "" - -#. type: TP -#: doc/tin.5:125 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:134 -msgid "" -"The \"test\" field may be used to test some external condition (e.g., the " -"machine architecture, or the window system in use) to determine whether or " -"not the mailcap line applies. It specifies a program to be run to test some " -"condition. The semantics of execution and of the value returned by the test " -"program are operating system dependent. If the test fails, a subsequent " -"mailcap entry should be sought. Multiple test fields are not permitted \\(em " -"since a test can call a program, it can already be arbitrarily complex." -msgstr "" - -#. type: TP -#: doc/tin.5:134 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:146 -msgid "" -"The \"needsterminal\" field indicates that the view-command must be run on " -"an interactive terminal. This is needed to inform window-oriented user " -"agents that an interactive terminal is needed. (The decision is not left " -"exclusively to the view-command because in some circumstances it may not be " -"possible for such programs to tell whether or not they are on interactive " -"terminals.) The needsterminal command should be assumed to apply to the " -"compose and edit commands, too, if they exist. Note that this is NOT a test " -"- it is a requirement for the environment in which the program will be " -"executed, and should typically cause the creation of a terminal window when " -"not executed on either a real terminal or a terminal window." -msgstr "" - -#. type: TP -#: doc/tin.5:146 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:153 -msgid "" -"The \"copiousoutput\" field indicates that the output from the view-command " -"will be an extended stream of output, and is to be interpreted as advice to " -"the UA (User Agent mail-reading program) that the output should be either " -"paged or made scroll-able. Note that it is probably a mistake if " -"needsterminal and copiousoutput are both specified." -msgstr "" - -#. type: TP -#: doc/tin.5:153 doc/tin.5:1172 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:158 -msgid "" -"The \"description\" field simply provides a textual description, optionally " -"quoted, that describes the type of data, to be used optionally by mail " -"readers that wish to describe the data before offering to display it." -msgstr "" -"Das Feld \"description\" stellt eine Textbeschreibung (optional in " -"Anführungszeichen) bereit, die den Datentyp beschreibt und von E-Mail-" -"Programmen verwendet werden kann, die die Daten beschreiben möchten, bevor " -"sie ihre Anzeige anbieten." - -#. type: TP -#: doc/tin.5:158 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:166 -msgid "" -"The \"textualnewlines\" field, if set to any non-zero value, indicates that " -"this type of data is line-oriented and that, if encoded in base64, all " -"newlines should be converted to canonical form (CRLF) before encoding, and " -"will be in that form after decoding. In general, this field is needed only " -"if there is line-oriented data of some type other than text/* or non-line- " -"oriented data that is a subtype of text." -msgstr "" - -#. type: TP -#: doc/tin.5:166 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:171 -msgid "" -"The \"x11-bitmap\" field names a file, in X11 bitmap (xbm) format, which " -"points to an appropriate icon to be used to visually denote the presence of " -"this kind of data." -msgstr "" - -#. type: TP -#: doc/tin.5:171 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:179 -msgid "" -"The \"nametemplate\" field gives a filename format, in which %s will be " -"replaced by a short unique string to give the name of the temporary file to " -"be passed to the viewing command. This is only expected to be relevant in " -"environments where filename extensions are meaningful, e.g., one could " -"specify that a GIF file being passed to a gif viewer should have a name " -"ending in \".gif\" by using \"nametemplate=%s.gif\"" -msgstr "" - -#. type: Plain text -#: doc/tin.5:184 -msgid "" -"B<\\%tin>(1) currently only respects the \"test\", \"description\", " -"\"nametemplate\" and partly the \"needsterminal\" flags, all other flags are " -"internally ignored. It also can't handle the \"%F\" and \"%n\" expansions " -"yet." -msgstr "" - -#. type: TP -#: doc/tin.5:184 doc/tin.5:272 doc/tin.5:302 doc/tin.5:393 doc/tin.5:724 -#: doc/tin.5:889 doc/tin.5:1201 -#, no-wrap -msgid "Example:" -msgstr "Beispiel:" - -#. type: Plain text -#: doc/tin.5:189 -#, no-wrap -msgid "# mailcap file example\n" -msgstr "# mailcap Beispiel-Datei\n" - -#. type: Plain text -#: doc/tin.5:191 -#, no-wrap -msgid "image/*;\\e\n" -msgstr "image/*;\\e\n" - -#. type: Plain text -#: doc/tin.5:194 -#, no-wrap -msgid "xv -8 -geometry +0 '%s';\\e\n" -msgstr "xv -8 -geometry +0 '%s';\\e\n" - -#. type: Plain text -#: doc/tin.5:196 -#, no-wrap -msgid "description=%{name} %t-Image;\\e\n" -msgstr "description=%{name} %t-Image;\\e\n" - -#. type: Plain text -#: doc/tin.5:198 -#, no-wrap -msgid "test=test \"$DISPLAY\" != \"\";\\e\n" -msgstr "test=test \"$DISPLAY\" != \"\";\\e\n" - -#. type: Plain text -#: doc/tin.5:200 -#, no-wrap -msgid "nametemplate=%s.IMAGE\n" -msgstr "nametemplate=%s.IMAGE\n" - -#. type: Plain text -#: doc/tin.5:203 -#, no-wrap -msgid "message/rfc822;\\e\n" -msgstr "message/rfc822;\\e\n" - -#. type: Plain text -#: doc/tin.5:206 -#, no-wrap -msgid "${PAGER:-\"more\"} '%s';\\e\n" -msgstr "${PAGER:-\"more\"} '%s';\\e\n" - -#. type: Plain text -#: doc/tin.5:208 -#, no-wrap -msgid "edit=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "edit=${EDITOR:-\"vi\"} '%s';\\e\n" - -#. type: Plain text -#: doc/tin.5:210 -#, no-wrap -msgid "compose=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "compose=${EDITOR:-\"vi\"} '%s';\\e\n" - -#. type: Plain text -#: doc/tin.5:212 -#, no-wrap -msgid "print=a2ps '%s';\\e\n" -msgstr "print=a2ps '%s';\\e\n" - -#. type: Plain text -#: doc/tin.5:214 -#, no-wrap -msgid "needsterminal\n" -msgstr "needsterminal\n" - -#. type: Plain text -#: doc/tin.5:227 -msgid "" -"default NNTP-server to read news from if not reading from the local spool. " -"\\&'B<-g> I', $B have higher priority (in that order), " -"the default server given at compile time has lower priority." -msgstr "" -"Standard-NNTP-Server zum Lesen von Nachrichten, wenn nicht vom lokalen Spool " -"gelesen wird. 'B<-g> I', $B haben eine höhere Priorität " -"(in dieser Reihenfolge), der zur Kompilierungszeit angegebene Standardserver " -"hat eine niedrigere Priorität." - -#. type: Plain text -#: doc/tin.5:237 -msgid "" -"secret to be used for cancel-locks if B<\\%tin>(1) is built with support " -"for it. An empty secret file disables the cancel-lock creation in that case. " -"This file should be readable only by the user." -msgstr "" -"Geheimwort das für Cancel-Locks verwendet werden soll falls B<\\%tin>(1) mit " -"Unterstützung dafür gebaut wurde. Eine leere Datei deaktiviert in diesem " -"Fall die Erstellung des Cancel-Locks. Diese Datei sollte nur für den " -"Benutzer lesbar sein." - -#. type: Plain text -#: doc/tin.5:248 -msgid "mime type / filename extension pairs" -msgstr "Mime-Typ / Dateinamen Erweiterungspaare" - -#. type: Plain text -#: doc/tin.5:261 -msgid "" -"\"I I [I]\" pairs for NNTP servers that " -"require authorization. If the password contains a space or a tab it must be " -"enclosed in double quotes (\"). Usernames must not be enclosed in double " -"quotes and thus can't contain spaces or tabs. Any line that starts with " -"\"#\" is a comment. Blank lines are ignored. This file should be readable " -"only for the user as it contains the user's unencrypted password for reading " -"news!" -msgstr "" - -#. type: TP -#: doc/tin.5:261 doc/tin.5:1185 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:265 -msgid "" -"full qualified domain name of the news server. Additionally, a port can be " -"specified by appending :portnumber." -msgstr "" -"Vollständiger Name (FQDN) des Newsservers. Zusätzlich kann noch ein Port mit " -"angehängter :Portnummer angegeben werden." - -#. type: TP -#: doc/tin.5:265 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:268 -msgid "user's unencrypted password for reading news." -msgstr "Unverschlüsseltes Passwort für den Newsserver." - -#. type: TP -#: doc/tin.5:268 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:272 -msgid "" -"username on the news server if it differs from the local login. This field " -"is optional." -msgstr "" -"Benutzername auf dem Newsserver falls er vom lokalen Benutzernamen abweicht. " -"Dieses Feld ist optional." - -#. type: Plain text -#: doc/tin.5:276 -msgid "# sample .newsauth file" -msgstr "# Beispiel .newsauth-Datei" - -#. type: Plain text -#: doc/tin.5:278 -msgid "news.example.org secret" -msgstr "news.example.org geheim" - -#. type: Plain text -#: doc/tin.5:280 -msgid "news.example.net arcane guest" -msgstr "news.example.net verborgen gast" - -#. type: Plain text -#: doc/tin.5:282 -msgid "news.example.com \"top secret\" james.bond@example.com" -msgstr "news.example.com \"streng geheim\" james.bond@example.com" - -#. type: Plain text -#: doc/tin.5:291 -msgid "" -"\"II [I
[,I
| -I
]...]\" lines." -msgstr "" -"\"II [I[,I | -I]...]\" " -"Zeilen." - -#. type: TP -#: doc/tin.5:291 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:294 -msgid "the name of the newsgroup." -msgstr "Der Name der Newsgruppe." - -#. type: TP -#: doc/tin.5:294 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:297 -msgid "a flag indicating if the group is subscribed ':' or not '!\\&'." -msgstr "" -"Markierung die angibt ob die Gruppe abonniert ist ':' oder nicht '!\\&'." - -#. type: TP -#: doc/tin.5:297 -#, no-wrap -msgid "B
" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:302 -msgid "" -"range of already read articles from that group; numbers separated by commas " -"with sequential numbers collapsed with hyphens. Empty lines and lines which " -"start with \"#\" are ignored and not written back." -msgstr "" -"Bereich bereits gelesener Artikel aus dieser Gruppe; durch Kommas getrennte " -"Zahlen mit aufeinander folgenden Zahlen, die durch Bindestriche " -"zusammengefasst sind. Leere Zeilen und Zeilen, die mit \"#\" beginnen werden " -"ignoriert und nicht zurückgeschrieben." - -#. type: Plain text -#: doc/tin.5:306 -msgid "# sample .newsrc file" -msgstr "# .newsrc Beispiel-Datei" - -#. type: Plain text -#: doc/tin.5:308 -msgid "news.software.b! 1-666,669" -msgstr "news.software.b! 1-666,669" - -#. type: Plain text -#: doc/tin.5:310 -msgid "news.software.nntp: 1-13245,13247,13249" -msgstr "news.software.nntp: 1-13245,13247,13249" - -#. type: Plain text -#: doc/tin.5:312 -msgid "news.software.readers: 1-19567,19571-19597" -msgstr "news.software.readers: 1-19567,19571-19597" - -#. type: Plain text -#: doc/tin.5:322 -msgid "backup of I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "Sicherungskopie von I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" - -#. type: Plain text -#: doc/tin.5:331 -msgid "signature" -msgstr "Signatur" - -#. type: Plain text -#: doc/tin.5:338 -msgid "fixed part of a randomly generated signature, this will be added first" -msgstr "" -"Fester Bestandteil einer zufällig erzeugten Signatur, dieser wird zuerst " -"hinzugefügt" - -#. type: Plain text -#: doc/tin.5:345 -msgid "history of last used strings" -msgstr "Verlaufsliste der zuletzt verwendeten Zeichenfolgen" - -#. type: Plain text -#: doc/tin.5:352 -msgid "mailgroups index files" -msgstr "Mailgruppen-Indexdateien" - -#. type: Plain text -#: doc/tin.5:361 -msgid "newsgroups index files" -msgstr "Newsgruppen-Indexdateien" - -#. type: Plain text -#: doc/tin.5:368 -msgid "saved newsgroups index files" -msgstr "Indexdateien für gespeicherte Newsgruppen" - -#. type: Plain text -#: doc/tin.5:378 -msgid "" -"active file (\"I I I I\" " -"quadruples) of user's mailgroups (requires B<\\%tin>(1) to be built with mh-" -"mail-handling support)." -msgstr "" -"Active Datei (\"I I I " -"I\" Quadrupel) der E-Mail-Gruppen des Benutzers (erfordert, dass " -"B<\\%tin>(1) mit mh-Mail-Handling-Unterstützung gebaut wurde)." - -#. type: TP -#: doc/tin.5:378 doc/tin.5:1169 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:382 -msgid "" -"must be the pathname of the mailbox relative to field #4 with '/' changed to " -"'.\\&'" -msgstr "" -"Pfad der Mailbox relativ zu Feld #4, wobei '/' in '.\\&' umgewandelt sein " -"muss." - -#. type: TP -#: doc/tin.5:382 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:386 -msgid "" -"just put a large number here, something higher than the highest message in " -"the mailbox" -msgstr "" -"Geben Sie hier einfach eine große Zahl ein, die höher ist als die der " -"höchsten Nachricht im Postfach" - -#. type: TP -#: doc/tin.5:386 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:389 -msgid "put 0 here" -msgstr "hier 0 angeben" - -#. type: TP -#: doc/tin.5:389 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:393 -msgid "" -"path of mail spool directory. This must be the full pathname to the root of " -"the mail folder area." -msgstr "" -"Pfad des Mail-Spool-Verzeichnisses. Dies muss der vollständige Pfadname zum " -"Stammverzeichnis des E-Mail Ordnerbereichs sein." - -#. type: Plain text -#: doc/tin.5:397 -msgid "Mail.inbox 12345 00000 /home/foo" -msgstr "Mail.inbox 12345 00000 /home/foo" - -#. type: Plain text -#: doc/tin.5:399 -msgid "Mail.outbox 23456 00000 /home/foo" -msgstr "Mail.outbox 23456 00000 /home/foo" - -#. type: Plain text -#: doc/tin.5:403 -msgid "" -"This allows access to the 'inbox' and 'outbox' folders of user foo. They " -"are accessed via /home/foo/Mail/inbox and /home/foo/Mail/outbox" -msgstr "" -"Dies ermöglicht den Zugriff auf die Ordner \"Posteingang\"und " -"\"Postausgang\" des Benutzers foo. Der Zugriff erfolgt über /home/foo/Mail/" -"inbox und /home/foo/Mail/outbox" - -#. type: Plain text -#: doc/tin.5:410 -msgid "active file of user's saved newsgroups, used by B." -msgstr "" -"aktive Datei der gespeicherten Newsgroups des Benutzers, verwendet von B." - -#. type: Plain text -#: doc/tin.5:432 -msgid "" -"The group attributes files may be used to override some global settings from " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc> on a per group basis. Order is " -"important as last match counts; this allows one to refine attributes for " -"narrowed scopes. Note that the IgrouplistE> line has to be " -"specified before the attributes are specified for that list and each " -"attribute can only be set once per scope section. All attributes are set to " -"a reasonable default so you only have to specify the attribute that you want " -"to change. All toggle attributes are set by specifying ON/OFF. Otherwise, " -"they function exactly as their global equivalents. The following group " -"attributes are available:" -msgstr "" - -#. type: TP -#: doc/tin.5:432 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:438 -msgid "" -"This changes the list of groups to which the attributes that follow will be " -"applied. See the section NEWSGROUP LISTS & WILDCARDS in B<\\%tin>(1) for " -"the types of pattern that can be used here." -msgstr "" - -#. type: TP -#: doc/tin.5:438 doc/tin.5:1347 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:441 doc/tin.5:444 doc/tin.5:447 doc/tin.5:450 doc/tin.5:453 -#: doc/tin.5:456 doc/tin.5:469 doc/tin.5:479 doc/tin.5:482 doc/tin.5:495 -#: doc/tin.5:498 doc/tin.5:501 doc/tin.5:504 doc/tin.5:507 doc/tin.5:514 -#: doc/tin.5:517 doc/tin.5:544 doc/tin.5:547 doc/tin.5:550 doc/tin.5:561 -#: doc/tin.5:564 doc/tin.5:567 doc/tin.5:570 doc/tin.5:573 doc/tin.5:576 -#: doc/tin.5:579 doc/tin.5:582 doc/tin.5:585 doc/tin.5:588 doc/tin.5:594 -#: doc/tin.5:597 doc/tin.5:600 doc/tin.5:603 doc/tin.5:606 doc/tin.5:609 -#: doc/tin.5:612 doc/tin.5:618 doc/tin.5:621 doc/tin.5:624 doc/tin.5:627 -#: doc/tin.5:630 doc/tin.5:633 doc/tin.5:636 doc/tin.5:639 doc/tin.5:642 -#: doc/tin.5:645 doc/tin.5:703 -msgid "Identical to the tinrc variable of the same name" -msgstr "Identisch mit der tinrc-Variable gleichen Namens" - -#. type: TP -#: doc/tin.5:441 doc/tin.5:1351 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:444 doc/tin.5:1354 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:447 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:450 doc/tin.5:1403 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:453 doc/tin.5:1407 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:456 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:460 -msgid "" -"Automatically perform the B ('B') command after " -"entering the group." -msgstr "" -"Führt nach dem Betreten der Gruppe automatisch den Befehl " -"B ('B') aus." - -#. type: TP -#: doc/tin.5:460 doc/tin.5:1414 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:466 -msgid "" -"Can be used to override the global setting in tinrc on a per group basis. " -"For more information read section AUTOMATIC MAILING AND SAVING NEW NEWS in " -"B<\\%tin>(1)." -msgstr "" -"Sende ungelesene Artikel an den angegebenen Benutzer um sie später lesen zu " -"können. Für weitere Informationen siehe den Abschnitt \"AUTOMATISCHES MAILEN " -"UND SPEICHERN VON UNGELESENEN ARTIKELN\" in B<\\%tin>(1)." - -#. type: TP -#: doc/tin.5:466 doc/tin.5:1551 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:469 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:476 -msgid "" -"If this is set to ON, then saved article files that have been post-processed " -"will be automatically deleted, otherwise the user will be asked whether to " -"delete the post-processed files. Automatic processing of marked articles " -"using B ('B') will suppress prompting." -msgstr "" - -#. type: TP -#: doc/tin.5:476 doc/tin.5:1672 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:479 doc/tin.5:1679 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:482 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:486 -msgid "" -"Mailbox to save sent mails. The format of the mailbox is controlled via the " -"tinrc B variable." -msgstr "" -"Postfach zum Speichern gesendeter E-Mails. Das verwendete Format wird über " -"die Variable tinrc B festgelegt." - -#. type: TP -#: doc/tin.5:486 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:489 -msgid "Set ''Followup-To:'' header to the specified group(s)." -msgstr "Setzt den ''Followup-To:''-Header auf die angegebene(n) Gruppe(n)." - -#. type: TP -#: doc/tin.5:489 doc/tin.5:802 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:492 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:492 doc/tin.5:1714 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:495 doc/tin.5:1717 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:498 doc/tin.5:1797 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:501 doc/tin.5:1809 doc/tin.5:2666 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:504 doc/tin.5:1829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:507 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:511 -msgid "" -"Used when a group is a mailing list. All responses to the group will be " -"directed to this email address instead" -msgstr "" -"Wird verwendet, falls eine Gruppe eine Mailingliste ist. Alle Antworten an " -"die Gruppe werden stattdessen an diese E-Mail-Adresse weitergeleitet." - -#. type: TP -#: doc/tin.5:511 doc/tin.5:1867 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:514 doc/tin.5:1864 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:517 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:534 -msgid "" -"Determines whether usenet articles are forwarded as attachment or inline. " -"When set to OFF, the forwarded article will be included in the body of the " -"mail, while setting this variable to ON will cause the article to be " -"attached as a separate MIME part. Enabling B is particularly " -"useful for articles consisting of multiple MIME parts such as PGP/MIME " -"signed messages or being encoded in a different character set than your " -"local one. It is also useful if the receiver should be able to operate on " -"the entire forwarded article (i.e., view or save it without your comments). " -"On the other hand, if you want to forward only some parts of the article or " -"to insert 'inline' annotations, you might want to disable this option. " -"Currently mime_forward is forced if the article to be attached is a " -"multipart MIME article, this may change in a future version. Please note " -"that for this option to have effect, the tinrc variable " -"B has to be set to 0 (which is the default)." -msgstr "" - -#. type: TP -#: doc/tin.5:534 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:541 -msgid "" -"A comma separated list of MIME major/minor Content-Types that will be saved " -"when using the view/save and save/autosave features. A single * can be used " -"to wildcard the major and/or minor type and a ! as the first character in an " -"entry will negate it, eg: image/*,!image/bmp,!text/html. Default is */*" -msgstr "" - -#. type: TP -#: doc/tin.5:541 doc/tin.5:1950 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:544 doc/tin.5:1957 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:547 doc/tin.5:1966 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:550 doc/tin.5:2639 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:558 -msgid "" -"This can be used to set the article header field ''Organization:''. It " -"overrides the setting (if any) of organization in I " -"and $B (or $B on Apollo DomainOS). If it points to a " -"readable file a random line from that file will be used. Note that some news " -"servers might still overwrite the \\&''Organization:'' header." -msgstr "" - -#. type: TP -#: doc/tin.5:558 doc/tin.5:2009 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:561 doc/tin.5:2013 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:564 doc/tin.5:2024 doc/tin.5:2663 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:567 doc/tin.5:2037 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:570 doc/tin.5:2029 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:573 doc/tin.5:2061 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:576 doc/tin.5:2075 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:579 doc/tin.5:2079 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:582 doc/tin.5:2083 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:585 doc/tin.5:2148 -#, no-wrap -msgid "B" -msgstr "B" - -#. TODO: document option -#. type: TP -#: doc/tin.5:588 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:591 doc/tin.5:2224 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:594 doc/tin.5:2207 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:597 doc/tin.5:2256 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:600 doc/tin.5:2264 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:603 doc/tin.5:2267 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:606 doc/tin.5:2270 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:609 doc/tin.5:2283 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:612 doc/tin.5:2293 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:615 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:615 doc/tin.5:2322 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:618 doc/tin.5:2389 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:621 doc/tin.5:2394 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:624 doc/tin.5:2438 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:627 doc/tin.5:2414 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:630 doc/tin.5:2433 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:633 doc/tin.5:2467 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:636 doc/tin.5:2492 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:639 doc/tin.5:2557 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:642 doc/tin.5:2615 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:645 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:653 -msgid "" -"A piece of text that will be added at the start of a message body. If this " -"string starts with a / or ~ then it is assumed to be the name of a file " -"containing the text to insert. If the string starts with a ! then what " -"follows is assumed to be the path to a program to be executed to generate " -"the content. %G is expanded to the current news.group.name and %P is " -"expanded to the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:653 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:656 -msgid "Insert ''X-Comment-To:'' header, this is only useful in FIDO groups." -msgstr "" -"Fügt Header ''X-Comment-To:'' ein, dies ist nur in FIDO-Gruppen nützlich." - -#. type: TP -#: doc/tin.5:656 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:665 -msgid "" -"A string including header-name and the contents of the header that will be " -"automatically added when posting. If the string starts with a / or ~ then it " -"is assumed to be the name of a file containing the header and its content to " -"be inserted. If the string starts with a ! then what follows is assumed to " -"be the path to a program to be executed to generate the header and its " -"content. %G is expanded to the current news.group.name and %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:665 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:671 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be used." -msgstr "" -"Eine durch Komma getrennte Liste von Newsgroup-Mustern im Wildmat-Stil, auf " -"welche Gruppen die durch B hinzugefügte Filterregel " -"angewendet wird. Falls sie nicht gesetzt ist, wird die Vorgabe aus der tinrc-" -"Variablen B verwendet." - -#. type: TP -#: doc/tin.5:671 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:674 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:674 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:677 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:677 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:680 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:680 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:686 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be used." -msgstr "" -"Eine durch Kommata getrennte Liste von Newsgroup-Mustern (im Wildmat-Stil) " -"auf welche Gruppen die durch B hinzugefügte Filterregel " -"angewendet wird. Falls sie nicht gesetzt ist, wird die Vorgabe aus der tinrc-" -"Variablen B verwendet." - -#. type: TP -#: doc/tin.5:686 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:689 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:689 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:692 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:692 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:695 -msgid "Identical to the tinrc variable B" -msgstr "Identisch mit der tinrc-Variable B" - -#. type: TP -#: doc/tin.5:695 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:700 -msgid "" -"Path and options for B<\\%ispell>(1)-like spell-checker, e.g., \"aspell --" -"mode=email --dont-backup check\"" -msgstr "" - -#. type: TP -#: doc/tin.5:700 doc/tin.5:1902 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:703 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:714 -msgid "" -"Assume (broken) articles without MIME charset declaration have this charset " -"\\(em default is US-ASCII. This attribute works only on systems with working " -"B<\\%iconv>(3) or B<\\%ucnv_*>(), others might have to compile B<\\" -"%tin>(1) with --disable-mime-strict-charset." -msgstr "" - -#. type: TP -#: doc/tin.5:714 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:724 -msgid "" -"Guess charset for (broken) articles without MIME charset declaration. This " -"attribute works only on systems with working B<\\%iconv>(3) or B<\\" -"%ucnv_*>() and B<\\%ucsdet_getName()> from libicui18n. It has no effect if " -"undeclared_charset is also set." -msgstr "" - -#. type: Plain text -#: doc/tin.5:734 -#, no-wrap -msgid "" -"# include extra headers\n" -"# assume ISO-8859-1 as charset if no charset is declared\n" -"# in all but fido7.* groups\n" -"scope=*,!fido7.*\n" -"x_headers=~/.tin/headers\n" -"undeclared_charset=ISO-8859-1\n" -msgstr "" -"# zusätzliche Header einfügen\n" -"# ISO-8859-1 als Zeichensatz annehmen falls keiner\n" -"# angegeben wurde; in allen Gruppen außer fido7.*\n" -"scope=*,!fido7.*\n" -"x_headers=~/.tin/headers\n" -"undeclared_charset=ISO-8859-1\n" - -#. type: Plain text -#: doc/tin.5:738 -#, no-wrap -msgid "" -"# in *sources* set post process type to shar only\n" -"scope=*sources*\n" -"post_process_type=1\n" -msgstr "" -"# in *sources* Postprozesstyp auf nur Shell Archive setzen\n" -"scope=*sources*\n" -"post_process_type=1\n" - -#. type: Plain text -#: doc/tin.5:745 -#, no-wrap -msgid "" -"# in *binaries* turn on full post processing,\n" -"# remove tmp files and set Followup-To: poster\n" -"scope=*binaries*\n" -"post_process_type=2\n" -"delete_tmp_files=ON\n" -"followup_to=poster\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:751 -#, no-wrap -msgid "" -"# in fido.* newsgroups change quote_chars\n" -"# and add X-Comment-To: line\n" -"scope=fido.*\n" -"quote_chars=%IE_\n" -"x_comment_to=ON\n" -msgstr "" -"# Anderes quote_chars in fido.* Newsgruppen\n" -"# und X-Comment-To: Zeile hinzufügen\n" -"scope=fido.*\n" -"quote_chars=%IE_\n" -"x_comment_to=ON\n" - -#. type: Plain text -#: doc/tin.5:755 -#, no-wrap -msgid "" -"# in fido7.* newsgroups guess charset\n" -"scope=fido7.*\n" -"undeclared_cs_guess=ON\n" -msgstr "" -"# in fido7.* Gruppen den Zeichnsatz erraten\n" -"scope=fido7.*\n" -"undeclared_cs_guess=ON\n" - -#. type: Plain text -#: doc/tin.5:761 -#, no-wrap -msgid "" -"# in *.test newsgroups, don't append signature\n" -"# and preset Subject\n" -"scope=*.test\n" -"sigfile=--none\n" -"x_headers=Subject: test - ignore - no reply\n" -msgstr "" -"# Keine Signatur in *.test Newsgruppen anhängen\n" -"# und Subject vorwählen\n" -"scope=*.test\n" -"sigfile=--none\n" -"x_headers=Subject: Test - ignore - no reply\n" - -#. type: Plain text -#: doc/tin.5:765 -#, no-wrap -msgid "" -"# assume ISO-2022-JP-2 as charset\n" -"scope=fj.*,japan.*\n" -"undeclared_charset=ISO-2022-JP-2\n" -msgstr "" -"# ISO-2022-JP-2 als Zeichensatz annehmen\n" -"scope=fj.*,japan.*\n" -"undeclared_charset=ISO-2022-JP-2\n" - -#. type: Plain text -#: doc/tin.5:779 -msgid "" -"The filter file is used to assign scores to certain articles. Based on the " -"score an article can be filtered out (hidden) or marked hot. Empty lines or " -"lines beginning with a '#' are ignored. Multiple matching-rules in the same " -"scope are all applied individually and not only when they all hit at the " -"same time (logical OR not AND)." -msgstr "" - -#. type: TP -#: doc/tin.5:779 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:788 -msgid "" -"Every entry (rule) in the filter file might get a comment. Multiple lines " -"are allowed (but only for comments yet). Every line must start with the " -"\"comment=\" keyword. Comments must appear first in the rule. Comment lines " -"placed within a rule will be moved to the begin of the next rule. This might " -"be changed in the future. Don't use '#' to mark comments as those lines are " -"ignored and your comments will get lost on the next write of the file." -msgstr "" - -#. type: TP -#: doc/tin.5:788 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:792 -msgid "" -"A comma-separated list of newsgroup patterns in wildmat-style to which " -"groups the filter rule will be applied. This line is mandatory!" -msgstr "" -"Eine durch Komma getrennte Liste von Newsgroup-Mustern im Wildmat-Stil, auf " -"welche Gruppen die Filterregel angewendet wird. Diese Zeile ist zwingend " -"erforderlich!" - -#. type: TP -#: doc/tin.5:792 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:795 -msgid "0=case-sensitive, 1=case-insensitive" -msgstr "0=Groß/Kleinschreibung beachten, 1=Groß/Kleinschreibung ignorieren" - -#. type: TP -#: doc/tin.5:795 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:798 -msgid "" -"Score value of the rule; can also be one of the magic words \"kill\" or " -"\"hot\"." -msgstr "" -"Wert der Regel; kann auch eines der Zauberwörter \"kill\" oder \"hot\" sein." - -#. type: TP -#: doc/tin.5:798 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:802 -msgid "" -"Match against ''Subject:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" -"Vergleiche mit ''Subject:''. Der verwendete Vergleichstyp (Wildmat oder " -"Regex) hängt von der Einstellung der tinrc-Variable B ab." - -#. type: Plain text -#: doc/tin.5:811 -msgid "" -"Match against ''From:''. B<\\%tin>(1) converts the contents of the " -"''From:'' header to an old style e-mail address, e.g., ''some@body.example " -"(John Doe)'' instead of ''John Doe Esome@body.exampleE'', before " -"trying to match the patterns in the filter rule. The matching type used " -"(wildmat or regex) depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:811 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:816 -msgid "" -"Match against ''Message-ID:'' and full ''References:''. The matching type " -"used (wildmat or regex) depends on the setting of the tinrc variable " -"B." -msgstr "" -"Vergleiche mit ''Message-ID:'' & allen ''References:''. Der verwendete " -"Vergleichstyp (Wildmat oder Regex) hängt von der Einstellung der tinrc-" -"Variablen B ab." - -#. type: TP -#: doc/tin.5:816 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:821 -msgid "" -"Match against ''Message-ID:'' and last ''References:'' entry (direct " -"responses) only. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" -"Vergleiche mit ''Message-ID:'' und letztem ''References:'' Eintrag (direkte " -"Antworten). Der verwendete Vergleichstyp (Wildmat oder Regex) hängt von der " -"Einstellung der tinrc-Variable B ab." - -#. type: TP -#: doc/tin.5:821 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:825 -msgid "" -"Match against ''Message-ID:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" -"Vergleiche mit ''Message-ID:''. Der verwendete Vergleichstyp (Wildmat oder " -"Regex) hängt von der Einstellung der tinrc-Variable B ab." - -#. type: TP -#: doc/tin.5:825 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:829 -msgid "" -"Match against ''References:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" -"Vergleiche mit ''References:''. Der verwendete Vergleichstyp (Wildmat oder " -"Regex) hängt von der Einstellung der tinrc-Variable B ab." - -#. type: TP -#: doc/tin.5:829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:832 -msgid "" -"Match against ''Lines:'', Enum matches less than, Enum matches more " -"than." -msgstr "" -"Übereinstimmung mit ''Lines:'', EZahl entspricht weniger als, EZahl " -"entspricht mehr als." - -#. type: TP -#: doc/tin.5:832 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:839 -msgid "" -"Match against ''From:'' address parser return codes. Enum matches less " -"than, Enum matches more than the returned numeric value. " -"GNKSA_LOCAL_DOMAIN_LITERAL or GNKSA_INVALID_DOMAIN are only returned if " -"B is set to false. As the built in domain list " -"is outdated this should be considered carefully." -msgstr "" - -#. type: ta -#: doc/tin.5:841 -#, no-wrap -msgid "\\w'%406\t'u +\\w'GNKSA_ZERO_LENGTH_LOCAL_WORD'u" -msgstr "\\w'%406\t'u +\\w'GNKSA_ZERO_LENGTH_LOCAL_WORD'u" - -#. type: Plain text -#: doc/tin.5:871 -#, no-wrap -msgid "" -" B<0>\tGNKSA_OK\n" -" B<1>\tGNKSA_INTERNAL_ERROR\n" -"B<100>\tGNKSA_LANGLE_MISSING\n" -"B<101>\tGNKSA_LPAREN_MISSING\n" -"B<102>\tGNKSA_RPAREN_MISSING\n" -"B<103>\tGNKSA_ATSIGN_MISSING\n" -"B<104>\tGNKSA_RANGLE_MISSING\n" -"B<200>\tGNKSA_SINGLE_DOMAIN\n" -"B<201>\tGNKSA_INVALID_DOMAIN\n" -"B<202>\tGNKSA_ILLEGAL_DOMAIN\n" -"B<203>\tGNKSA_UNKNOWN_DOMAIN\n" -"B<204>\tGNKSA_INVALID_FQDN_CHAR\n" -"B<205>\tGNKSA_ZERO_LENGTH_LABEL\n" -"B<206>\tGNKSA_ILLEGAL_LABEL_LENGTH\n" -"B<207>\tGNKSA_ILLEGAL_LABEL_HYPHEN\n" -"B<208>\tGNKSA_ILLEGAL_LABEL_BEGNUM\n" -"B<209>\tGNKSA_BAD_DOMAIN_LITERAL\n" -"B<210>\tGNKSA_LOCAL_DOMAIN_LITERAL\n" -"B<211>\tGNKSA_RBRACKET_MISSING\n" -"B<300>\tGNKSA_LOCALPART_MISSING\n" -"B<301>\tGNKSA_INVALID_LOCALPART\n" -"B<302>\tGNKSA_ZERO_LENGTH_LOCAL_WORD\n" -"B<400>\tGNKSA_ILLEGAL_UNQUOTED_CHAR\n" -"B<401>\tGNKSA_ILLEGAL_QUOTED_CHAR\n" -"B<402>\tGNKSA_ILLEGAL_ENCODED_CHAR\n" -"B<403>\tGNKSA_BAD_ENCODE_SYNTAX\n" -"B<404>\tGNKSA_ILLEGAL_PAREN_CHAR\n" -"B<405>\tGNKSA_INVALID_REALNAME\n" -"B<406>\tGNKSA_MISSING_REALNAME\n" -msgstr "" -" B<0>\tGNKSA_OK\n" -" B<1>\tGNKSA_INTERNAL_ERROR\n" -"B<100>\tGNKSA_LANGLE_MISSING\n" -"B<101>\tGNKSA_LPAREN_MISSING\n" -"B<102>\tGNKSA_RPAREN_MISSING\n" -"B<103>\tGNKSA_ATSIGN_MISSING\n" -"B<104>\tGNKSA_RANGLE_MISSING\n" -"B<200>\tGNKSA_SINGLE_DOMAIN\n" -"B<201>\tGNKSA_INVALID_DOMAIN\n" -"B<202>\tGNKSA_ILLEGAL_DOMAIN\n" -"B<203>\tGNKSA_UNKNOWN_DOMAIN\n" -"B<204>\tGNKSA_INVALID_FQDN_CHAR\n" -"B<205>\tGNKSA_ZERO_LENGTH_LABEL\n" -"B<206>\tGNKSA_ILLEGAL_LABEL_LENGTH\n" -"B<207>\tGNKSA_ILLEGAL_LABEL_HYPHEN\n" -"B<208>\tGNKSA_ILLEGAL_LABEL_BEGNUM\n" -"B<209>\tGNKSA_BAD_DOMAIN_LITERAL\n" -"B<210>\tGNKSA_LOCAL_DOMAIN_LITERAL\n" -"B<211>\tGNKSA_RBRACKET_MISSING\n" -"B<300>\tGNKSA_LOCALPART_MISSING\n" -"B<301>\tGNKSA_INVALID_LOCALPART\n" -"B<302>\tGNKSA_ZERO_LENGTH_LOCAL_WORD\n" -"B<400>\tGNKSA_ILLEGAL_UNQUOTED_CHAR\n" -"B<401>\tGNKSA_ILLEGAL_QUOTED_CHAR\n" -"B<402>\tGNKSA_ILLEGAL_ENCODED_CHAR\n" -"B<403>\tGNKSA_BAD_ENCODE_SYNTAX\n" -"B<404>\tGNKSA_ILLEGAL_PAREN_CHAR\n" -"B<405>\tGNKSA_INVALID_REALNAME\n" -"B<406>\tGNKSA_MISSING_REALNAME\n" - -#. type: TP -#: doc/tin.5:873 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:880 -msgid "" -"Match against ''Xref:'' line. Before any matching is done the line is turned " -"into the same format ''Newsgroups:'' has that is it is turned into a comma " -"separated newsgroup list with all other information (i.e., the article " -"counter) removed. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" - -#. TODO: document option in detail -#. type: TP -#: doc/tin.5:880 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:886 -msgid "" -"Match against ''Path:'' line. This may not work on some servers. The " -"matching type used (wildmat or regex) depends on the setting of the tinrc " -"variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:886 doc/tin.5:2810 -#, no-wrap -msgid "B
" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2384 doc/tin.5:2136 -msgid "" -"If set to 0, this feature is deactivated, otherwise it means the number of " -"days. Default is 2." -msgstr "" - -#. type: TP -#: doc/tin.1:2384 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2388 -msgid "" -"If ON B does the rendering of bi-directional text. If OFF B leaves " -"the rendering of bi-directional text to the terminal. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2388 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2393 doc/tin.5:2148 -msgid "" -"The news I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file is " -"reread at regular intervals to show if any new news has arrived. Default is " -"1200. Setting this to 0 will disable this feature." -msgstr "" - -#. type: TP -#: doc/tin.1:2393 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2397 doc/tin.5:2152 -msgid "" -"Directory where articles/threads are saved. Default is I<${TIN_HOMEDIR:-" -"\"$HOME\"}/News>." -msgstr "" - -#. type: TP -#: doc/tin.1:2397 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2401 doc/tin.5:2156 -msgid "" -"If the score of an article is below or equal this value the article gets " -"marked as killed." -msgstr "" - -#. type: TP -#: doc/tin.1:2401 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2405 doc/tin.5:2160 -msgid "" -"If the score of an article is above or equal this value the article gets " -"marked as hot." -msgstr "" - -#. type: TP -#: doc/tin.1:2405 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2409 doc/tin.5:2164 -msgid "" -"Score of an article which should be killed, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2409 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2413 doc/tin.5:2168 -msgid "" -"Score of an article which should be marked hot, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2413 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2421 -msgid "" -"The number of lines that will be scrolled up/down in the article pager when " -"using cursor-up/down. The default is 1 (line-by-line). Set to 0 to get " -"traditional B page-by-page scrolling. Set to -1 to get page-by-page " -"scrolling where the top/bottom line is carried over onto the next page. " -"This setting supersedes show_last_line_prev_page=ON. Set to -2 to get half-" -"page scrolling. This setting supersedes B=OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2421 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2425 -msgid "" -"Format string B uses for Selection level representation. See the " -"section \"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%f\\ %n\\ %U\\ \\ " -"%G\\ \\ %d\"." -msgstr "" - -#. type: TP -#: doc/tin.1:2425 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2429 doc/tin.5:2211 -msgid "" -"Which information about the author should be shown. Default is 2, authors " -"full name." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2432 doc/tin.5:2214 -msgid "B, only the ''Subject:'' line will be displayed." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2435 doc/tin.5:2217 -msgid "" -"B
, ''Subject:'' line & the address part of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2438 doc/tin.5:2220 -msgid "" -"B, ''Subject:'' line & the authors full name part of the " -"\\&''From:'' line are displayed (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2441 doc/tin.5:2223 -msgid "" -"B
, ''Subject:'' line & all of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: TP -#: doc/tin.1:2442 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2451 -msgid "" -"If ON show a short group description text after newsgroup name at the group " -"selection level. The ''B<-d>'' command-line flag will override the setting " -"and turn descriptions off. The text used is taken from the I<${TIN_LIBDIR:-" -"NEWSLIBDIR}/newsgroups> file and if supported (requires B to be built " -"with mh-mail-handling support) from I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"mailgroups> for mailgroups. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2451 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2454 doc/tin.5:2196 -msgid "Function used for sorting articles. Default is 0." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2459 doc/tin.5:2201 -msgid "Use B<\\%qsort>(3) for sorting." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2464 doc/tin.5:2206 -msgid "" -"Use B<\\%heapsort>(3) for sorting. This might be faster in large groups " -"with long threads (somewhat presorted data)." -msgstr "" - -#. type: TP -#: doc/tin.1:2465 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2470 -msgid "" -"Allows you to select whether B shows a help indication, a new mail " -"indication, both, or neither in the various level titles. Default is 3." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2473 doc/tin.5:2247 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2475 doc/tin.5:2249 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2478 doc/tin.5:2252 -msgid "" -"B, show only the mail sign, and only if new " -"mail has arrived." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2481 doc/tin.5:2255 -msgid "" -"B, show mail sign if new mail has " -"arrived otherwise show help sign." -msgstr "" - -#. type: TP -#: doc/tin.1:2482 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2486 doc/tin.5:2260 -msgid "" -"If ON show only new/unread articles otherwise show all articles. Default is " -"ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2486 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2490 doc/tin.5:2264 -msgid "" -"If ON show only subscribed groups that contain unread articles. Default is " -"OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2490 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2493 doc/tin.5:2267 -msgid "If OFF don't show signatures when displaying articles. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2493 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2497 doc/tin.5:2228 -msgid "" -"If ON show article score in the lower left corner when displaying articles. " -"Default is OFF. See also B and B." -msgstr "" - -#. type: TP -#: doc/tin.1:2497 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2500 doc/tin.5:2270 -msgid "If ON prepend the signature with sigdashes. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2500 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2510 -msgid "" -"The path that specifies the signature file to use when posting, following up " -"to or replying to an article. If the path is a directory then the signature " -"will be randomly generated from files that are in the specified directory. " -"If the path starts with a ! the program the path points to will be executed " -"to generate a signature. In order to pass the group name to the program, %G " -"can be specified. This will be replaced by the name of the current " -"newsgroup. --none will suppress any signature. Default is I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.Sig>." -msgstr "" - -#. type: TP -#: doc/tin.1:2510 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2513 doc/tin.5:2286 -msgid "If ON add signature to reposted articles. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2513 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2518 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2518 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2522 doc/tin.5:2297 -msgid "" -"This specifies how articles should be sorted. Sort by ascending Date (6) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2525 doc/tin.5:2300 -msgid "B, don't sort articles." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2527 doc/tin.5:2302 -msgid "" -"B, sort articles by ''Subject:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2529 doc/tin.5:2304 -msgid "B, sort articles by ''Subject:'' field ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2531 doc/tin.5:2306 -msgid "B, sort articles by ''From:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2533 doc/tin.5:2308 -msgid "B, sort articles by ''From:'' field ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2535 doc/tin.5:2310 -msgid "B, sort articles by ''Date:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2538 doc/tin.5:2313 -msgid "" -"B, sort articles by ''Date:'' field ascending (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2540 doc/tin.5:2315 -msgid "B, sort articles by filtering score descending." -msgstr "" - -#. type: IP -#: doc/tin.1:2540 doc/tin.5:2315 -#, no-wrap -msgid "8" -msgstr "8" - -#. type: Plain text -#: doc/tin.1:2542 doc/tin.5:2317 -msgid "B, sort articles by filtering score ascending." -msgstr "" - -#. type: IP -#: doc/tin.1:2542 doc/tin.5:2317 -#, no-wrap -msgid "9" -msgstr "9" - -#. type: Plain text -#: doc/tin.1:2544 doc/tin.5:2319 -msgid "B, sort articles by ''Lines:'' field descending." -msgstr "" - -#. type: IP -#: doc/tin.1:2544 doc/tin.5:2319 -#, no-wrap -msgid "10" -msgstr "10" - -#. type: Plain text -#: doc/tin.1:2546 doc/tin.5:2321 -msgid "B, sort articles by ''Lines:'' field ascending." -msgstr "" - -#. type: TP -#: doc/tin.1:2547 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2552 doc/tin.5:2326 -msgid "" -"This specifies how threads will be sorted. Sort by descending Score (1) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2555 doc/tin.5:2329 -msgid "B, don't sort threads." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2558 doc/tin.5:2332 -msgid "" -"B, sort threads by filtering score descending (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2560 doc/tin.5:2334 -msgid "B, sort threads by filtering score ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2562 doc/tin.5:2336 -msgid "" -"B, sort threads by date of last posting " -"descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2564 doc/tin.5:2338 -msgid "" -"B, sort threads by date of last posting " -"ascending." -msgstr "" - -#. type: TP -#: doc/tin.1:2565 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2570 doc/tin.5:2344 -msgid "" -"Set this option to a list of comma-separated strings to be warned if you are " -"replying to an article by mail where the e-mail address contains one of " -"these strings. The matching is case-insensitive. Example:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2572 doc/tin.5:2346 -msgid "I" -msgstr "" - -#. type: TP -#: doc/tin.1:2572 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2577 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2577 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2583 doc/tin.5:2357 -msgid "" -"Strips the blanks from the end of each line therefore speeding up the " -"display when reading on a slow terminal or via modem. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2583 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2592 doc/tin.5:2366 -msgid "" -"Bogus groups are groups that are present in your I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.newsrc> file that no longer exist on the news server. There are " -"3 options. 0 means do nothing & always keep bogus groups. 1 means bogus " -"groups will be permanently removed. 2 means that bogus groups will appear on " -"the Group Selection Menu, prefixed with a 'D'. This allows you to " -"unsubscribe from them as and when you wish. Default is 0 (Always Keep)." -msgstr "" - -#. type: TP -#: doc/tin.1:2592 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2596 doc/tin.5:2370 -msgid "" -"If ON, then unsubscribed groups will be permanently removed from your " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2596 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2602 -msgid "" -"A regular expression to find Subject prefixes like \"Re:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2602 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2608 doc/tin.5:2382 -msgid "" -"A regular expression to find Subject suffixes like \"(was:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2608 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2613 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2613 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2618 doc/tin.5:2620 -msgid "" -"If enabled a search for the next unread article will wrap around all " -"articles to find also previous unread articles. If disabled the search stops " -"at the end of the thread list. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2618 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2622 -msgid "" -"If ON, show \"a as Umlaut-a, etc. Default is OFF. This behavior can also be " -"toggled in the article viewer via B ('B<\">')." -msgstr "" - -#. type: TP -#: doc/tin.1:2622 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2630 -msgid "" -"Defines which threading method to use. It's possible to set the threading " -"type on a per group basis by setting the group attribute variable " -"B to 0 \\(en 4 in the file I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"attributes>. (See also \"GROUP ATTRIBUTES\".) The default is Both Subject " -"and References. The choices are:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2633 -msgid "B, don't thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2635 -msgid "B, thread on ''Subject:'' only." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2637 -msgid "B, thread on ''References:'' only." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2640 -msgid "" -"B, thread on ''References:'' then " -"\\&''Subject:'' (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2642 -msgid "B, thread multipart articles on ''Subject:''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2645 -msgid "" -"B, thread base upon a partial character match on " -"\\&''Subject:''." -msgstr "" - -#. type: TP -#: doc/tin.1:2646 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2650 doc/tin.5:2442 -msgid "" -"If ON catchup group/thread when leaving with the left arrow key. Default is " -"ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2650 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2654 -msgid "" -"Format string B uses for Thread level representation. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%n\\ %m\\ \\ [%L]\\ \\ %T\\ " -"\\ %F\"." -msgstr "" - -#. type: TP -#: doc/tin.1:2654 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2658 -msgid "" -"How closely the subjects must match for two threads to be considered part of " -"the same thread. This is a percentage and the default if 75%." -msgstr "" - -#. type: TP -#: doc/tin.1:2658 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2662 doc/tin.5:2446 -msgid "" -"How the total score of a thread is computed. Default is 0, the maximum score " -"in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2665 doc/tin.5:2449 -msgid "B, the maximum score in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2667 doc/tin.5:2451 -msgid "B, the sum of all scores in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2669 doc/tin.5:2453 -msgid "B, the average score in this thread." -msgstr "" - -#. type: TP -#: doc/tin.1:2670 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2675 -msgid "" -"The name of file containing all trusted CA certificates used for NNTPS (B<\\" -"%RFC8143>) connections. If left empty the system default will be used." -msgstr "" - -#. type: TP -#: doc/tin.1:2675 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2683 doc/tin.5:2467 -msgid "" -"If ON append //TRANSLIT to the first argument of B<\\%iconv_open>(3) to " -"enable transliteration. This means that when a character cannot be " -"represented in the target character set, it can be approximated through one " -"or several similarly looking characters. On systems where this extension " -"doesn't exist, this option is disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2683 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2687 -msgid "" -"Allows you to select how B treats blank lines in article bodies. " -"Default is 0. This option does not affect lines within verbatim blocks." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2690 doc/tin.5:2476 -msgid "B, do nothing." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2692 doc/tin.5:2478 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2694 doc/tin.5:2480 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2696 doc/tin.5:2482 -msgid "" -"B, skip leading and trailing blank lines." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2699 doc/tin.5:2485 -msgid "" -"B, replace multiple blank lines between text " -"blocks with one blank line." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2701 doc/tin.5:2487 -msgid "B, 4 + 1" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2703 doc/tin.5:2489 -msgid "B, 4 + 2" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2705 doc/tin.5:2491 -msgid "B, 4 + 3" -msgstr "" - -#. type: TP -#: doc/tin.1:2706 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2714 -msgid "" -"If ON remove soft hyphens in non verbatim blocks of articles in UTF-8 when " -"they are displayed in a UTF-8 locale. The character SOFT HYPHEN (U+00AD) is " -"an invisible format character that merely indicates a preferred intraword " -"line break position. However, some terminal emulators display a space or a " -"hyphen, for example, in the place of the soft hyphen. This setting can be " -"used to improve the display of those articles. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2714 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2719 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2719 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2722 -msgid "If ON remove I<~/.article> after posting. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2722 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2727 doc/tin.5:2512 -msgid "" -"The program that will be run when launching URLs in the article viewer using " -"B ('B'). The actual URL will be appended. Default is " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2727 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2730 doc/tin.5:2515 -msgid "Enable highlighting URLs in message body. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2730 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2733 -msgid "If enabled B uses ANSI-colors. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2733 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.1:2736 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2742 doc/tin.5:2529 -msgid "" -"Allows the mouse button support in an B<\\%xterm>(1x) to be enabled/" -"disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2742 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2752 -msgid "" -"If enabled B uses B<\\%slrnface>(1) to interpret the ''X-Face:'' " -"header. For this option to have any effect, B must be running in an B<\\" -"%xterm>(1x) and B<\\%slrnface>(1) must be in your $B. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2752 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2756 -msgid "" -"If ON use UTF-8 characters for indicator ('\\(-E'), thread/attachment " -"tree and ellipsis ('...'). Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2756 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2760 -msgid "" -"A regular expression that B will use to find the begin of a verbatim " -"block." -msgstr "" - -#. type: TP -#: doc/tin.1:2760 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2764 -msgid "" -"A regular expression that B will use to find the end of a verbatim " -"block." -msgstr "" - -#. type: TP -#: doc/tin.1:2764 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2767 doc/tin.5:2560 -msgid "If ON verbatim blocks will be detected. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2767 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2789 -msgid "" -"Allows you to select how B matches strings. The default is 0 and uses " -"the B<\\%wildmat>(3) notation, which is how this has traditionally been " -"handled. Setting this to 1 allows you to use B<\\%perl>(1) compatible " -"regular expressions B<\\%pcre>(3) or B<\\%pcre2>(3) (see also B<\\" -"%perlre>(1) and B<\\%pcrepattern>(3) or B<\\%pcre2pattern>(3)). You will " -"probably want to update your filter file if you use this regularly. NB: " -"Newsgroup names will always be matched using the B<\\%wildmat>(3) notation." -msgstr "" - -#. type: TP -#: doc/tin.1:2789 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2793 doc/tin.5:2588 -msgid "" -"Should the leading and ending stars, slashes, strokes and dashes also be " -"displayed, even when they are highlighting marks?" -msgstr "" - -# fuzzy -#. type: Plain text -#: doc/tin.1:2796 doc/tin.5:2591 -msgid "B" -msgstr "B" - -# fuzzy -#. type: Plain text -#: doc/tin.1:2798 doc/tin.5:2593 -msgid "yes, B" -msgstr "si B" - -#. type: Plain text -#: doc/tin.1:2800 doc/tin.5:2595 -msgid "print a B instead" -msgstr "" - -#. type: TP -#: doc/tin.1:2801 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2809 doc/tin.5:2604 -msgid "" -"Enable word highlighting. See B for the options " -"available. If B is enabled the colors specified in " -"B, B, B and B are " -"used for word highlighting else the character attributes specified in " -"B, B, B and B " -"are used. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2809 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2820 doc/tin.5:2615 -msgid "" -"Sets the column at which a displayed article body should be wrapped. If " -"this value is equal to 0, it defaults to the current screen width. If this " -"value is greater than your current screen width and B is " -"unset the part off-screen is not displayed. Thus setting this option to a " -"large value can be used to disable wrapping. If this value is negative the " -"wrap margin is the current screen width plus the given value (as long as the " -"result is still positive, otherwise it will fall back to the current screen " -"width). Default is 0, wrapping at the current screen width." -msgstr "" - -#. type: TP -#: doc/tin.1:2820 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2827 doc/tin.5:2625 -msgid "" -"Format is the same as for B, this is used when answering " -"to a crossposting to several groups with no ''Followup-To:'' set." -msgstr "" - -#. type: SS -#: doc/tin.1:2827 -#, no-wrap -msgid "ATTRIBUTES MENU AND GROUP ATTRIBUTES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2834 -msgid "" -"B allows certain attributes to be set on a per group basis. If it " -"exists, the global attributes file, I<${TIN_LIBDIR:-NEWSLIBDIR}/attributes> " -"is read. After that, the user's own attributes file I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.tin/attributes> is read. The global attributes file is useful " -"for distributing system-wide defaults to new users who have no private " -"attributes file yet." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2842 -msgid "" -"Note that the IgrouplistE> line has to be specified before " -"the attributes are specified for that list. All attributes are set to a " -"reasonable default so you only have to specify the attribute that you want " -"to change (e.g., B). All toggle attributes are set by specifying ON/" -"OFF. Otherwise, these function exactly the same as their global equivalents. " -"For more details see B<\\%tin>(5)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2849 -msgid "" -"Attributes can also be changed from the attributes menu which can be " -"accessed by B ('BTABE>') from the options menu " -"or B ('B<^J>' or 'BCRE>') from the scopes menu. The " -"attributes menu looks and behaves very similar to the options menu. The " -"title shows the current scope. Attributes set in the current scope are " -"marked with '+' to the left of the attributes number." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2856 -msgid "" -"Besides the keys for moving around and changing values known from the " -"options menu the attributes menu provides the following command: " -"B ('B') which resets an attribute to a default value." -msgstr "" - -#. type: SS -#: doc/tin.1:2856 -#, no-wrap -msgid "SCOPES MENU" -msgstr "ÁMBITO" - -#. type: Plain text -#: doc/tin.1:2861 -msgid "" -"The scopes menu (accessible from the options menu with B " -"('B')) shows all scopes read from the global and local attributes file. " -"Scopes from the global attributes file are marked with '!\\&' to the left of " -"the scope number. Delete/rename/move are not possible with those scopes." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2873 -msgid "" -"In addition to the common moving keys the following commands are available: " -"B ('B<^J>' or 'BCRE>') enter the attributes menu for " -"the current scope, B ('B') edit the local " -"attributes file, B ('B') add a new scope, B " -"('B') delete the current scope, B ('B') move the current " -"scope to a new position, B ('B') rename the current scope. " -"B ('B') toggles the help mini menu at the bottom of " -"the screen and posting etiquette after composing an article " -"(B)." -msgstr "" - -#. type: SS -#: doc/tin.1:2873 -#, no-wrap -msgid "FILTERING ARTICLES" -msgstr "" - -#. FIXME - add scoring description -#. type: Plain text -#: doc/tin.1:2880 -msgid "" -"When there is a subject or an author which you are either very interested " -"in, or find completely uninteresting, you can easily instruct B to " -"I or I articles that match I that you " -"specify. This can be anything from the name of the author to the number of " -"lines in an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2887 -msgid "" -"When B starts up the user's kill-file I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/" -"filter> or the file specified via ''B<-F>'' is read (see also B<\\" -"%tin>(5) ). Each time a newsgroup is entered the rules are applied and " -"articles killed or selected when they meet certain criteria." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2892 -msgid "" -"The degree to which rules are applied depend on the B tinrc " -"setting. By default killed articles will only be marked read. Adjust " -"B for more aggressive processing. Articles that match an auto-" -"selection rule are marked with a ''*''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2897 -msgid "" -"Filtering rules can be manually entered into I<${TIN_HOMEDIR:-\"$HOME\"}/." -"tin/filter> (but don't do this whilst running B else you will lose your " -"changes) or by using an on-screen menu within B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2902 -msgid "" -"The filtering capabilities of B have been significantly enhanced over " -"previous versions to include scoring and better pattern matching. It is " -"recommended that you read the file I in the B documentation " -"directory. This file can also be read online at" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2904 -msgid "Ehttp://bzr.tin.org/doc/filteringE." -msgstr "Ehttp://bzr.tin.org/doc/filteringE." - -#. FIXME - Next paragraph is out of date -#. type: Plain text -#: doc/tin.1:2917 -msgid "" -"The on-screen filtering menu is accessed by pressing B " -"('B<^K>') or B ('B<^A>') at the Group and Article levels. " -"It allows the user to kill or select an article that matches the current " -"''Subject:'' line, ''From:'' line or a string entered by the user. The user " -"entered string can be applied to the \\&''Subject:'' or ''From:'' line of an " -"article. The filter can be limited to the current newsgroup or it can apply " -"to all newsgroups. Once entered the user can abort the command and not save " -"the new filter, edit the full filter file or save filter." -msgstr "" - -#. type: SS -#: doc/tin.1:2917 -#, no-wrap -msgid "POSTING ARTICLES" -msgstr "RETENIENDO ARTÍCULOS" - -#. type: Plain text -#: doc/tin.1:2920 -msgid "" -"B allows posting of articles, follow-up to already posted articles and " -"replying direct through mail to the author of an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2930 -msgid "" -"Use the B ('B') command to post an article to a newsgroup. After " -"entering the post subject the default editor (i.e., B<\\%vi>(1)) or the " -"editor specified by the $B or $B environment variable will " -"be started and the article can be entered. To crosspost articles simply add " -"a comma and the name of the newsgroup(s) to the end of the ''Newsgroups:'' " -"line at the beginning of the article. After saving and exiting the editor " -"you are asked if you wish to a)bort posting the article, e)dit the article " -"again or p)ost the article to the specified newsgroup(s)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2935 -msgid "" -"Use the B ('B') command to display a history of the " -"articles you have posted. The date the article was posted, which newsgroups " -"the article was posted to and the articles subject line are displayed. See " -"the section \"POSTING HISTORY LISTING\" for more information." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2943 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^W>') command to post a follow-up article to " -"an already posted article. The B command will copy the " -"text of the original article into the editor. The " -"B command will copy the text and all headers of " -"the original article into the editor. The editing procedure is the same as " -"when posting an article with the B ('B') command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2957 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^E>') command to reply direct through mail to " -"the author of an already posted article. The B command will " -"copy the text of the original article into the editor. The " -"B command will copy the text and all headers of the " -"original article into the editor. The editing procedure is the same as when " -"posting an article with the B ('B') command. After saving and " -"exiting the editor you are asked if you wish to abort sending the article " -"via B ('B'), edit the article again via B ('B') " -"or send the article to the author via B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:2957 -#, no-wrap -msgid "CUSTOMIZING THE ARTICLE QUOTE STRING" -msgstr "ADAPTADO LOS ARTÍCULOS ENTRECOMILLADOS" - -#. type: Plain text -#: doc/tin.1:2966 -msgid "" -"When posting a followup to an article or replying direct to the author of an " -"article via email the text of the article can be quoted. The beginning of " -"the quoted text can contain information about the quoted article (e.g., Name " -"and the Message-ID of the article). If the article has multiple addresses " -"only the first is evaluated. To allow for different situations certain " -"information from the article can be used in the quoted string. The following " -"variables are expanded if found in the tinrc variables B, " -"B or B:" -msgstr "" - -#. type: ta -#: doc/tin.1:2968 -#, no-wrap -msgid "\\w'%A 'u +\\w'Address'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2977 -#, no-wrap -msgid "" -"B<%A>\tAddress (Email)\n" -"B<%D>\tDate (uses B)\n" -"B<%F>\tFull address (%N E%AE)\n" -"B<%G>\tGroupname\n" -"B<%M>\tMessage-ID\n" -"B<%N>\tFullname of author\n" -"B<%C>\tFirstname of author\n" -"B<%I>\tInitials of author\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2980 -msgid "e.g.," -msgstr "p.e.," - -#. type: Plain text -#: doc/tin.1:2985 -#, no-wrap -msgid "" -"\\f(CRmail_quote_format=On %D in %G you wrote:\n" -"news_quote_format=In %M, %F wrote:\\fR\n" -msgstr "" -"\\f(CRmail_quote_format=On %D in %G you wrote:\n" -"news_quote_format=In %M, %F wrote:\\fR\n" - -#. type: Plain text -#: doc/tin.1:2989 -msgid "would expand to:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2994 -#, no-wrap -msgid "" -"\\f(CROn 21 Sep 1993 09:45:51 -0400 in alt.sources you wrote:\n" -"In EabcINN123@example.orgE, Joe Bar Ejoe@example.orgE wrote:\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3004 -msgid "" -"The quoted text section of an article is marked by a preceding quote string " -"at the beginning of each quoted line. The default quote string is set to " -"\\&'E_'. The default can be changed by setting the tinrc variable " -"B to ones own preference. (Note that '_' underline is used to " -"represent a space)." -msgstr "" - -#. type: SS -#: doc/tin.1:3004 -#, no-wrap -msgid "MAILING PIPING PRINTING REPOSTING AND SAVING ARTICLES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3011 -msgid "" -"The command interface to B, B, B or " -"B ('B'), B ('B<|>'), B ('B'), B " -"or B ('B') and B, B or B " -"('B' and B, B or B 'B') " -"articles is the same for ease of use." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3016 -msgid "" -"Auto-saving with B<*AutoSave> ('B') is a special case and operates only " -"on marked articles. They will processed without any further prompting " -"according to the default save parameters defined in tinrc or by any " -"attributes set for the current group." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3020 -msgid "" -"Otherwise, the initial prompt will ask you to select which article, thread, " -"hot (auto-selected), regular expression pattern, tagged articles you wish to " -"mail, pipe etc." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3024 -msgid "" -"Tagged articles must have already been tagged with a B<*Tag> ('B') " -"command. All tagged articles can be untagged by a B<*Untag> ('B') untag " -"command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3030 -msgid "" -"If a regular expression pattern is selected you are asked to enter a pattern " -"(e.g., to match all articles subject lines containing 'net News' you enter " -"\"net News\"). Any articles that match the entered expression will be " -"mailed, piped etc. See also the B tinrc variable for advanced " -"pattern matching options." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3035 -msgid "" -"Various expansion characters are recognized when entering the directory and " -"file to save to. Environment variables (prefixed with '$') and user home " -"directories (prefixed by '~' or '~username') can be specified. Environment " -"variables can themselves contain other special characters." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3040 -msgid "" -"To save articles to a mailbox enter '=Emailbox nameE' when asked for " -"the save filename. If you enter just '=' then articles will be saved to a " -"mailbox with the name of the current newsgroup (eg, alt.sources). See " -"B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3045 -msgid "" -"To save in savedir/Enews.group.nameE/EfilenameE format enter " -"'+EfilenameE'. See B. Like '+' %G is expanded to the " -"current news.group.name but without B prefixed. %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3050 -msgid "" -"If saving multiple files at once the filename (if not referring to a " -"mailbox) will be extended by \".num\" where \"num\" is at least 3 digit " -"number counting up from 1. Environment variables are allowed within a " -"filename (e.g., I<$SOURCES/dir/filename>)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3056 -msgid "" -"When saving articles you can specify whether the saved files should be post " -"processed. A default process type can be set via B." -msgstr "" - -#. type: SS -#: doc/tin.1:3056 -#, no-wrap -msgid "AUTOMATIC MAILING AND SAVING NEW NEWS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3068 -msgid "" -"B allows new/unread news articles to be mailed (''B<-M>'' and \\&''B<-" -"N>'' option) or saved (''B<-S>'' option) in batch mode for later reading. " -"Useful when going on holiday and you don't want to return and find that " -"expire has removed a whole load of unread articles. Best to run via B<\\" -"%cron>(8) everyday while away, after which you will be mailed a report of " -"which articles were mailed/saved from which newsgroups and the total number " -"of articles mailed/saved. Articles are saved in a private news structure " -"under your B directory (default is I<${TIN_HOMEDIR:-\"$HOME\"}/" -"News>). Be careful of using this option if you read a lot of groups because " -"you could overflow your file system." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3072 -msgid "" -"When using ''B<-S>'' together with a given directory to save to (''B<-s>'' " -"option), the same directory must be specified when reading the articles by " -"''B<-R>''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3079 -msgid "" -"If you only want to save some of your groups use the B tinrc " -"variable. Set to ON or OFF in tinrc to enable/disable saving of all groups " -"and then use the B attribute to fine tune which groups you want " -"to have saved. For example, if you want to save most of your groups, then " -"set B to ON in tinrc and selectively turn off the ones you don't " -"want using attributes." -msgstr "" - -#. type: TP -#: doc/tin.1:3079 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3083 -msgid "" -"(mail any unread articles in newsgroups specified in file newsrc.mail to the " -"local user iain and mark them as read)" -msgstr "" - -#. type: TP -#: doc/tin.1:3083 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3087 -msgid "" -"(save any unread articles in newsgroups specified in file newsrc.save and " -"mark them as read)" -msgstr "" - -#. type: TP -#: doc/tin.1:3087 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3092 -msgid "(read any articles saved by B)" -msgstr "" - -#. type: SS -#: doc/tin.1:3092 -#, no-wrap -msgid "RANGES" -msgstr "LÍMITES" - -#. type: Plain text -#: doc/tin.1:3104 -msgid "" -"A range is simply a group of items marked using the B (B<'#'>) " -"key. Certain B commands will operate on a range if one exists rather " -"than just the current item. A range is an expression of the form " -"EminE\\(enEmaxE, e.g., 10\\(en15 will highlight items 10 " -"through 15 on the current screen. Other than absolute numeric positions, '." -"\\&' can be used in place of the current cursor position and '$' can be used " -"to mean the highest number available. Entering '0' at the prompt undoes the " -"previously entered range selection. Currently the only commands that " -"understand ranges are B ('B'), B " -"('B') and B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:3104 -#, no-wrap -msgid "NEWSGROUP LISTS & WILDCARDS" -msgstr "LISTADOS DE GRUPOS NOTICIARIOS Y COMODINES" - -#. type: Plain text -#: doc/tin.1:3116 -msgid "" -"Several places in B allow you to specify a list of newsgroups. These " -"include command-line groups, (un)subscribe groups, the AUTO[UN]SUBSCRIBE " -"mechanism. The scope= attributes file tag and the filter file group= tag " -"also use the same syntax. B interprets this variable similarly to B<\\" -"%rn>(1). It contains a list of patterns, separated by commas and possibly " -"prefixed with exclamation points. An exclamation point negates the meaning " -"of a match on this pattern, and can be used to cancel certain matches. See " -"B<\\%wildmat>(3) for details about the understood patterns. Some examples:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3118 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3120 -msgid "" -"Matches alt.config and everything in the 'news' hierarchy except news.test" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3125 -msgid "" -"See the explanation for the $B and $B " -"variables for further examples." -msgstr "" - -#. type: SS -#: doc/tin.1:3125 -#, no-wrap -msgid "SIGNATURES" -msgstr "FIRMAS" - -#. type: Plain text -#: doc/tin.1:3134 -msgid "" -"B will recognize a signature in either I<${TIN_HOMEDIR:-\"$HOME\"}/." -"signature> or I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>. If I<${TIN_HOMEDIR:-" -"\"$HOME\"}/.signature> exists, then the signature will be pulled into the " -"editor for mail commands only. A signature in I<${TIN_HOMEDIR:-\"$HOME\"}/." -"signature> will not be pulled into the editor for posting commands since B<\\" -"%inews>(1) will append the signature itself." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3137 -msgid "" -"A signature in I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig> will be pulled into the " -"editor for both posting and mailing commands." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3139 -msgid "The following is an example of a I<.Sig> file:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3144 -#, no-wrap -msgid "" -"\\f(CRNAMES Joe Bar Ejoe@example.orgE\n" -"SNAIL Musterweg 12, 99999 Notreal, Germany\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3159 -msgid "" -"B also has the capability to generate random signatures on a per " -"newsgroup basis if so desired. The way to accomplish this is to specify the " -"default signature or the group attribute sigfile as a directory. If for " -"example the sigfile path is I and I<.sigs> is a directory " -"then B will select a random signature from any file that is in the " -"directory I<.sigs> (note: one signature per numbered file). A random " -"signature can also consist of a fixed part signature that can contain your " -"name, address etc. followed by the random sig. The fixed part of the random " -"sig is read from the file I<$HOME/.sigfixed>." -msgstr "" - -#. type: SS -#: doc/tin.1:3159 -#, no-wrap -msgid "CUSTOMIZING THE SCREEN FORMAT" -msgstr "PERSONALIZANDO FORMATO DE PANTALLA" - -#. type: Plain text -#: doc/tin.1:3165 -msgid "" -"The look of the Selection, Group and Thread level can be customized via " -"format strings. These format strings define the content and the position of " -"each element on the screen. Variables are used within the format strings as " -"placeholders. If the article has multiple addresses only the first is " -"evaluated. The following variables are available:" -msgstr "" - -#. type: ta -#: doc/tin.1:3168 -#, no-wrap -msgid "\\w'%G 'u +\\w'current group/thread/article number'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3185 -#, no-wrap -msgid "" -"B<%D>\tdate\n" -"B<%F>\tfrom, name and/or address\n" -"B<%G>\tnewsgroup name\n" -"B<%I>\tinitials\n" -"B<%L>\tline count\n" -"B<%M>\tmessage-id\n" -"B<%R>\tnumber of responses in thread\n" -"B<%S>\tscore\n" -"B<%T>\tthread tree\n" -"B<%U>\tunread count\n" -"B<%d>\tnewsgroup description\n" -"B<%f>\tnewsgroup flag\n" -"B<%m>\tarticle marks\n" -"B<%n>\tcurrent group/thread/article number\n" -"B<%s>\tsubject\n" -"B<%%>\t%\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3190 -msgid "" -"Not all variables can be used in each level. The following table provides an " -"overview:" -msgstr "" - -#. type: ta -#: doc/tin.1:3193 -#, no-wrap -msgid "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3211 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%D>\t\tX\tX\n" -"B<%F>\t\tX\tX\n" -"B<%G>\tX\n" -"B<%I>\t\tX\tX\n" -"B<%L>\t\tX\tX\n" -"B<%M>\t\tX\tX\n" -"B<%R>\t\tX\n" -"B<%S>\t\tX\tX\n" -"B<%T>\t\t\tX\n" -"B<%U>\tX\n" -"B<%d>\tX\n" -"B<%f>\tX\n" -"B<%m>\t\tX\tX\n" -"B<%n>\tX\tX\tX\n" -"B<%s>\t\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3215 doc/tin.1:3379 -msgid "Defaults for the format strings:" -msgstr "" - -#. type: ta -#: doc/tin.1:3218 -#, no-wrap -msgid "\\w'select_format 'u +\\w'\"B<%n %m [%L] %T %F>\"'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3222 -#, no-wrap -msgid "" -"B:\t\"B<%f %n %U %G %d>\"\n" -"B:\t\"B<%n %m %R %L %s %F>\"\n" -"B:\t\"B<%n %m [%L] %T %F>\"\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3228 -msgid "" -"B controls whether the newsgroup description is shown or " -"not. The description can also be toggled with B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3233 -msgid "" -"The information displayed with 'B<%F>' depends on the value of " -"B. B resp. B " -"('B') switches through all available options." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3237 -msgid "" -"For date representation 'B<%D>' uses B. It is possible to " -"specify a different date format in round brackets (e.g., 'B<%(%d %b %y %H:" -"%M)D>'). See B for more details." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3241 -msgid "" -"The length of each item (except 'B<%%>') can be defined with a positive " -"number after the 'B<%>'. The following example displays the score in the " -"thread level 10 characters wide: 'B<%10S>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3247 -msgid "" -"If the newsgroup name is displayed together with the newsgroup description, " -"the width of the newsgroup name can be controlled via an optional comma " -"separated second value (e.g., 'B<%60,20G>'). It is valid to omit the first " -"value (e.g., ('B<%,20G>')). If no second value is given, B uses a " -"default value of 32." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3254 -msgid "" -"Some variables do have a default width which may lead to truncation. " -"Truncation for variables which contain only numbers happens by dividing the " -"value with a sufficient power of ten and adding a SI suffix to the result, " -"that is the variable holds a value of 54321 and the width for the variable " -"is 4 the result will be \"54 k\". If that's undesired you have to specify a " -"larger width manually, e.g., 'B<%6n>'. Here is an overview of the defaults:" -msgstr "" - -#. type: ta -#: doc/tin.1:3257 -#, no-wrap -msgid "\\w'Variable 'u +\\w'width'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3266 -#, no-wrap -msgid "" -"Variable\twidth\n" -"B<%I>\t 3\n" -"B<%L>\t 4\n" -"B<%M>\t10\n" -"B<%R>\t 3\n" -"B<%S>\t 6\n" -"B<%U>\t 5\n" -"B<%n>\t 4\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3277 -msgid "" -"If no length is given for 'B<%D>', the length is determined by the format " -"string for the date and the date of the current day. If the date format " -"string contains weekdays or months names it may happen that the date is " -"longer than determined in the first pass. In this case, the date is " -"truncated before display. This occurs, for example, if the current month is " -"May and the article to which the date is displayed was posted in December. " -"In such cases it might useful to determine the maximum length manually and " -"specify the length in the format string." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3281 -msgid "" -"In case the format string contains 'B<%G>' and 'B<%d>' and no length are " -"given, B determines the longest newsgroup name and uses this length for " -"'B<%G>'. The remaining space will used for 'B<%d>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3285 -msgid "" -"When the format string contains the specifier 'B<%F>' and 'B<%s>' resp. " -"'B<%T>' and no length are given, 'B<%F>' will use one third and 'B<%s>' " -"resp. 'B<%T>' will use two third of the available space." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3295 -msgid "" -"In addition, a minimum or a maximum screen width can be defined for each " -"item (except 'B<%%>'). In this case, the item will only be displayed when " -"the screen is wider resp. smaller than specified. This comes in handy to not " -"overload a small screen but have maximum information on a large screen. The " -"minimum screen width has to be specified by a positive number preceded by an " -"'B>', the maximum screenwidth has to be specified by a positive number " -"preceded by an 'B>'. In the following example B will display the " -"score only if the screen is wider than 100 characters: 'B<%E100S>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3309 -msgid "" -"If both the length and the minimum or maximum screen width should be " -"specified for an item, the length must be the first parameter and the " -"minimum or maximum screen width must be the second one. The following " -"example displays the score with a length of 10 characters only if the screen " -"is wider than 100 characters: 'B<%10E100S>'. A second length can be " -"specified for 'B<%F>' and 'B<%s>' resp. 'B<%T>', separated by a colon, which " -"is used if the minimum or maximum screen width is not reached. If no length " -"is specified after the colon, the item is displayed even if the minimum " -"screen width is not reached and the length is calculated as if no minimum " -"(or maximum) screen width had been specified. In the following example " -"B will display the subject with a length of 60 characters if the screen " -"is wider than 100 characters, otherwise a length of 40 characters is used: " -"'B<%60E100:40s>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3313 -msgid "" -"The look of the Attachment level and the mime and uue header at Page level " -"can be customized too via format strings. The following variables are " -"available:" -msgstr "" - -#. type: ta -#: doc/tin.1:3316 -#, no-wrap -msgid "\\w'%G 'u +\\w'Complete/incomplete UUE part indicator'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3335 -#, no-wrap -msgid "" -"B<%C>\tCharset\n" -"B<%c>\tLike %C but with description\n" -"B<%D>\tLine count\n" -"B<%d>\tLike %D but with description\n" -"B<%E>\tContent encoding\n" -"B<%e>\tLike %E but with description\n" -"B<%I>\tComplete/incomplete UUE part indicator\n" -"B<%L>\tLanguage\n" -"B<%l>\tLike %L but with description\n" -"B<%N>\tName\n" -"B<%n>\tLike %N but with description\n" -"B<%S>\tContent subtype\n" -"B<%s>\tLike %S but with description\n" -"B<%T>\tContent type\n" -"B<%t>\tLike %T but with description\n" -"B<%Z>\tSize in bytes\n" -"B<%z>\tLike %Z but with description\n" -"B<%%>\t%\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3340 -msgid "" -"Not all items can be used in each variable. The following table provides an " -"overview:" -msgstr "" - -#. type: ta -#: doc/tin.1:3343 -#, no-wrap -msgid "\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC +\\w'B'uC" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3363 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%C>\tX\tX\n" -"B<%c>\tX\tX\n" -"B<%D>\tX\tX\tX\n" -"B<%d>\tX\tX\tX\n" -"B<%E>\tX\tX\tX\n" -"B<%e>\tX\tX\tX\n" -"B<%I>\t\t\tX\n" -"B<%L>\tX\tX\n" -"B<%l>\tX\tX\n" -"B<%N>\t\tX\tX\n" -"B<%n>\t\tX\tX\n" -"B<%S>\tX\tX\tX\n" -"B<%s>\tX\tX\tX\n" -"B<%T>\tX\tX\tX\n" -"B<%t>\tX\tX\tX\n" -"B<%Z>\tX\tX\tX\n" -"B<%z>\tX\tX\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3377 -msgid "" -"By default, the string is not truncated. If it exceeds the screen width, it " -"is wrapped. If the % sign is followed by an exclamation mark ('!\\&') for " -"uppercase letters, the element is omitted if there is not enough space. If " -"the % sign is followed by an asterisk ('*') for a lowercase letter, the " -"description is omitted if there is not enough space. If the % sign is " -"followed by an exclamation mark ('!\\&') for a lowercase letter, the " -"description is omitted first and then the content. The shortening is always " -"from right to left, first the description is omitted and when no more " -"description is displayed, the content is omitted. If %T and %S follow each " -"other directly a '/' will be inserted in between. %Z will always have one " -"decimal point and may have a one letter bi-suffix." -msgstr "" - -#. type: ta -#: doc/tin.1:3382 -#, no-wrap -msgid "\\w'attachment_format'u +\\w'\"B<%T%S%E%C%d>\"'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3386 -#, no-wrap -msgid "" -"B:\t\"B<%T%S%E%C%d>\"\n" -"B:\t\"B<[-- %T%S%*n%z%*l%!c%!d%*e --]>\"\n" -"B:\t\t\"B<[-- %T%S%*n%I%!d%*e --]>\"\n" -msgstr "" - -#. type: SS -#: doc/tin.1:3389 -#, no-wrap -msgid "TIPS AND TRICKS" -msgstr "CONSEJOS Y TRUCOS" - -#. type: Plain text -#: doc/tin.1:3393 -msgid "" -"B can be pretty much be navigated by using the four cursor keys. The " -"left arrow key goes up a level, the right arrow key goes down a level, the " -"up arrow key goes up a line and the down arrow key goes down a line." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3395 -msgid "" -"The following newsgroups provide useful information concerning news software:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3398 -msgid "" -"\\(emnews.software.readers (info. about news user agents tin, rn, nn, slrn " -"etc.)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3400 -msgid "\\(emnews.software.nntp (info. about NNTP)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3402 -msgid "" -"\\(emnews.answers (Frequently Asked Questions (FAQ) about many different " -"themes)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3406 -msgid "" -"Many prompts within B offer a default choice that the cursor is " -"positioned on. By pressing 'BCRE>' the default value is taken. " -"Most prompts can be aborted by pressing 'BESCE>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3413 -msgid "" -"When B is run in an B<\\%xterm>(1x) it will resize itself each time " -"the B<\\%xterm>(1x) is resized." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3417 -msgid "" -"B will reread the I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-" -"active}> file at set intervals (B) to show any " -"newly arrived news." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3422 -msgid "" -"If you find large number of new newsgroups cluttering up your screen, " -"pressing B ('B') will make them go away." -msgstr "" - -#. type: SS -#: doc/tin.1:3422 -#, no-wrap -msgid "XTERM BUTTONS" -msgstr "BOTONES TERMINALES XTERM" - -#. type: Plain text -#: doc/tin.1:3428 -msgid "" -"If the environment variable B<$TERM> is set to B<\\%xterm>(1x), then button " -"pressing can be used to select groups and articles. In this discussion, the " -"buttons are assumed to be assigned conventionally (i.e., Button1 is the left " -"button)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3430 -msgid "In general (i.e., for the group, thread and article menus)," -msgstr "" - -#. type: TP -#: doc/tin.1:3430 -#, no-wrap -msgid "Button1 (left)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3433 -msgid "" -"enters next (lower) level if you click on an article, otherwise pages down." -msgstr "" - -#. type: TP -#: doc/tin.1:3433 -#, no-wrap -msgid "Button2 (center)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3437 -msgid "" -"returns to the previous (upper) level if you click on an article, otherwise " -"pages up." -msgstr "" - -#. type: TP -#: doc/tin.1:3437 -#, no-wrap -msgid "Button3 (right)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3441 -msgid "" -"positions on the article line under mouse cursor, or pages down if you've " -"clicked outside the list of articles." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3443 -msgid "In the group selection menu, if the mouse is pointing at a group then:" -msgstr "" - -#. type: TP -#: doc/tin.1:3443 doc/tin.1:3455 doc/tin.1:3469 -#, no-wrap -msgid "left button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3447 -msgid "" -"moves to and selects the group pointed at, just like B " -"('BCRE>')." -msgstr "" - -#. type: TP -#: doc/tin.1:3447 doc/tin.1:3459 doc/tin.1:3472 -#, no-wrap -msgid "center button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3450 -msgid "quits the program, just like B ('B')." -msgstr "" - -#. type: TP -#: doc/tin.1:3450 doc/tin.1:3464 doc/tin.1:3477 -#, no-wrap -msgid "right button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3453 -msgid "moves to the group pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3455 -msgid "" -"In the article menu, if the mouse is pointing at an article (or thread) then:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3459 -msgid "" -"reads the article pointed at, just like B " -"('BCRE>'), or the thread, just like B ('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3464 -msgid "" -"exits the menu, catching up on the group if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3467 -msgid "moves to the article (or thread) pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3469 -msgid "In the thread menu, if the mouse is pointing at an article then:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3472 -msgid "" -"reads article pointed at, just like B ('BCRE>')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3477 -msgid "" -"exits the menu, catching up on the thread if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3480 -msgid "moves to the article pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3487 -msgid "" -"In other menus and areas button pressing reverts back to usual cut and paste " -"of B<\\%xterm>(1x), but after one click of any button." -msgstr "" - -#. type: SS -#: doc/tin.1:3487 -#, no-wrap -msgid "INDEX FILES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3492 -msgid "" -"If your news server supports NOV index files (see B<\\%newsoverview>(5), " -"most modern installations will) and you have a fast connection to your news " -"server then this section can be ignored." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3499 -msgid "" -"If your news server doesn't support NOV index files or you have a very slow " -"connection to your news server then B can cache the index for each " -"newsgroup if B is set to ON. Note that this cache can " -"use up large amounts of disk space if you read a lot of groups and/or high " -"traffic groups. To reduce the amount of disk space used, " -"B can be set to ON." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3508 -msgid "" -"Each user creates/updates his/her own index files that are stored in " -"I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news/>. If you " -"are reading via NNTP then the news server name will be appended to keep the " -"indexes for different servers separate. If you are reading off the local " -"spool and local overview files already exist then turning on caching will " -"have no effect. Likewise unless you see significant delays entering a group " -"when reading via NNTP then turning on caching will have little or no effect." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3515 -msgid "" -"Entering a group the first time tends to be slow because the index file must " -"be built from scratch. To alleviate the slowness start B to create all " -"index files for the groups you subscribe to with B and go for a " -"coffee. Subsequent readings of a group will only need to do incremental " -"updating of the index file and will be much faster as only new articles will " -"need to be cached." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3520 -msgid "" -"As indexing might take some time you may want to run B from the system " -"batcher B<\\%cron>(8) with the ''B<-u>'' option:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3525 -#, no-wrap -msgid "\\f(CR30 6 * * * /usr/local/bin/tin -u\\fR\n" -msgstr "\\f(CR30 6 * * * /usr/local/bin/tin -u\\fR\n" - -#. type: Plain text -#: doc/tin.1:3531 -msgid "" -"If you are low on local disk space you should consider to manually purge " -"cached data for groups you are not reading anymore with something like:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3537 -#, no-wrap -msgid "" -"\\f(CRfind ${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news* \\e\n" -"-type f -name \"[0-9]*.[0-9]\" -atime +28 | xargs rm -f\\fR\n" -msgstr "" -"\\f(CRfind ${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news* \\e\n" -"-type f -name \"[0-9]*.[0-9]\" -atime +28 | xargs rm -f\\fR\n" - -#. type: SH -#: doc/tin.1:3542 doc/tin.5:21 -#, no-wrap -msgid "FILES" -msgstr "FICHEROS" - -#. TODO: mention dead.article, dead.articles -#. .article[.$$], .cancel[.$$], .letter[.$$]? -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. $TMPDIR/GNKSA (-D 64) -#. type: Plain text -#: doc/tin.1:3561 -msgid "For a detailed description see B<\\%tin>(5)." -msgstr "" - -#. TODO: mention -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.article -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.articles -#. ${TIN_HOMEDIR:\-"$HOME"}/.article[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.cancel[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.letter[.$$] -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. type: Plain text -#: doc/tin.1:3563 doc/tin.5:42 -msgid "I<$MAILCAPS>" -msgstr "I<$MAILCAPS>" - -#. type: Plain text -#: doc/tin.1:3565 doc/tin.5:44 -msgid "I<~/.mailcap>" -msgstr "I<~/.mailcap>" - -#. type: Plain text -#: doc/tin.1:3567 doc/tin.5:46 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3569 doc/tin.5:48 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3571 doc/tin.5:50 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3573 doc/tin.5:52 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3576 doc/tin.5:221 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3579 doc/tin.5:231 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret>" - -#. type: Plain text -#: doc/tin.1:3582 doc/tin.5:241 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.mime.types>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.mime.types>" - -#. type: Plain text -#: doc/tin.1:3584 doc/tin.5:243 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3586 doc/tin.5:245 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3589 doc/tin.5:252 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsauth>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsauth>" - -#. type: Plain text -#: doc/tin.1:3592 doc/tin.5:287 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" - -#. type: Plain text -#: doc/tin.1:3596 doc/tin.5:318 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/.oldnewsrc>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/.oldnewsrc>\n" - -#. type: Plain text -#: doc/tin.1:3600 doc/tin.5:326 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.signature>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.signature>" - -#. type: Plain text -#: doc/tin.1:3602 doc/tin.5:328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>" - -#. type: Plain text -#: doc/tin.1:3605 doc/tin.5:335 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.sigfixed>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.sigfixed>" - -#. type: Plain text -#: doc/tin.1:3608 doc/tin.5:342 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/.inputhistory>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/.inputhistory>" - -#. type: Plain text -#: doc/tin.1:3611 doc/tin.5:349 -msgid "I<${TIN_INDEX_MAILDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.mail/>" -msgstr "I<${TIN_INDEX_MAILDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.mail/>" - -#. type: Plain text -#: doc/tin.1:3615 doc/tin.5:357 -#, no-wrap -msgid "I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news${NNTPSERVER:+\"-$NNTPSERVER\"}/>\n" -msgstr "I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news${NNTPSERVER:+\"-$NNTPSERVER\"}/>\n" - -#. type: Plain text -#: doc/tin.1:3619 doc/tin.5:365 -msgid "I<${TIN_INDEX_SAVEDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.save/>" -msgstr "I<${TIN_INDEX_SAVEDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.save/>" - -#. type: Plain text -#: doc/tin.1:3622 doc/tin.5:372 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.mail>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.mail>" - -#. type: Plain text -#: doc/tin.1:3625 doc/tin.5:407 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.save>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.save>" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. ${TIN_LIBDIR\-/news/etc"}/attributes -#. type: Plain text -#: doc/tin.1:3629 doc/tin.5:418 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3631 doc/tin.5:420 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>" - -#. TODO: add missing descriptions and explain things in detail. -#. type: Plain text -#: doc/tin.1:3634 doc/tin.5:772 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter>" - -#. type: Plain text -#: doc/tin.1:3638 doc/tin.5:915 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/keymap${${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}:+\".${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}\"}>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/keymap${${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}:+\".${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}\"}>\n" - -#. type: Plain text -#: doc/tin.1:3640 doc/tin.5:917 -#, no-wrap -msgid "I\n" -msgstr "I\n" - -#. type: Plain text -#: doc/tin.1:3644 doc/tin.5:1163 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups>" - -#. type: Plain text -#: doc/tin.1:3647 doc/tin.5:1179 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>" - -#. type: Plain text -#: doc/tin.1:3650 doc/tin.5:1224 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>" - -#. type: Plain text -#: doc/tin.1:3653 doc/tin.5:1239 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/Mail/posted>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/Mail/posted>" - -#. type: Plain text -#: doc/tin.1:3656 doc/tin.5:1249 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/postponed.articles>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/postponed.articles>" - -#. type: Plain text -#: doc/tin.1:3660 doc/tin.5:1259 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/motd>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/motd>\n" - -#. type: Plain text -#: doc/tin.1:3665 doc/tin.5:1270 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/msglog>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/msglog>\n" - -#. type: Plain text -#: doc/tin.1:3670 doc/tin.5:1280 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/newsgroups>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/newsgroups>\n" - -#. type: Plain text -#: doc/tin.1:3675 doc/tin.5:1299 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/serverrc>\n" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/serverrc>\n" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. .IR ${TIN_LIBDIR\-"/news/etc"}/tinrc -#. type: Plain text -#: doc/tin.1:3680 doc/tin.5:1326 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3682 doc/tin.5:1328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>" -msgstr "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>" - -#. type: Plain text -#: doc/tin.1:3685 doc/tin.5:2629 -msgid "I" -msgstr "I" - -#. type: Plain text -#: doc/tin.1:3688 -msgid "I" -msgstr "I" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths -#. (described shown below). -#. type: Plain text -#: doc/tin.1:3691 doc/tin.5:2739 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}>" - -#. type: Plain text -#: doc/tin.1:3694 doc/tin.5:2800 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/active.times>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/active.times>" - -#. type: Plain text -#: doc/tin.1:3697 doc/tin.5:2827 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups>" - -#. type: Plain text -#: doc/tin.1:3700 doc/tin.5:2850 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/organization>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/organization>" - -#. is the Path correct? or is it /news/etc/overview.fmt -#. type: Plain text -#: doc/tin.1:3703 doc/tin.5:2860 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt>" - -#. is the Path correct? or is it /news/etc/subscriptions -#. type: Plain text -#: doc/tin.1:3708 doc/tin.5:2878 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>" -msgstr "I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>" - -#. type: SH -#: doc/tin.1:3708 -#, no-wrap -msgid "ENVIRONMENT" -msgstr "ENTORNO" - -#. type: TP -#: doc/tin.1:3712 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3720 -msgid "" -"Define this variable if you want to specify command-line options that B " -"should be started with to save typing them each time it is started. The " -"contents of the environment variable are added to the front of the command-" -"line options before it is parsed therefore allowing an option specified on " -"the command-line to override the same option specified in the environment." -msgstr "" - -#. type: TP -#: doc/tin.1:3720 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3725 -msgid "" -"Define this variable if you do not want the I<.tin> directory in I<$HOME/>. " -"E.g., if you want all B's private files in I you would set " -"$B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3725 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3731 -msgid "" -"Define this variable if you do not want the I<.news> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's news " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3731 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3737 -msgid "" -"Define this variable if you do not want the I<.mail> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's mail " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3737 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3743 -msgid "" -"Define this variable if you do not want the I<.save> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's save " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3743 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3748 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B is " -"running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3748 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3753 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3753 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3759 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is B (see above). If " -"B is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3759 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3765 -msgid "" -"Define this variable if you want to override the B filename " -"that was compiled into the B binary, default is I<.overview>. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3765 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3771 -msgid "" -"Define this variable if you want to override the B path " -"that was compiled into the B binary. If B is running in NNTP mode " -"setting this variable has no effect. If $B is set it is " -"prepended to $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3771 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3777 -msgid "" -"The default NNTP server to remotely read news from. This variable only needs " -"to be set if the ''B<-r>'' command-line option is specified and the file I does not exist. The ''B<-g>'' command line option overrides " -"$B." -msgstr "" - -#. type: TP -#: doc/tin.1:3777 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3782 -msgid "" -"The NNTP TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 119 (the default). The ''B<-p>'' command-line option " -"does override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3782 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3787 -msgid "" -"The NNTPS TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 563 (the default). The ''B<-p>'' and ''B<-T>'' command-" -"line options do override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3787 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3791 -msgid "" -"Set the article header field ''Distribution:'' to the contents of the " -"variable instead of the system default." -msgstr "" - -#. type: TP -#: doc/tin.1:3791 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3795 -msgid "" -"Set the ISO to ASCII charset decoding table character to use in decoding an " -"article text. Values can range from -1 to 6." -msgstr "" - -#. type: TP -#: doc/tin.1:3796 -#, no-wrap -msgid "B<-1>" -msgstr "B<-1>" - -#. type: Plain text -#: doc/tin.1:3799 -msgid "no conversion" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3802 -msgid "universal table for many languages" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3805 -msgid "single-spacing universal table" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3808 -msgid "table for Danish, Dutch, German, Norwegian and Swedish" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3812 -msgid "" -"table for Danish, Finnish, Norwegian and Swedish using the appropriate ISO " -"646 variant" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3815 -msgid "table with B codes in brackets" -msgstr "" - -#. type: TP -#: doc/tin.1:3815 -#, no-wrap -msgid "B<5>" -msgstr "B<5>" - -#. type: Plain text -#: doc/tin.1:3818 -msgid "table for printers that allow overstriking with backspace" -msgstr "" - -#. type: TP -#: doc/tin.1:3818 -#, no-wrap -msgid "B<6>" -msgstr "B<6>" - -#. type: Plain text -#: doc/tin.1:3821 -msgid "table for IBM PC character set (code page 437)" -msgstr "" - -#. type: TP -#: doc/tin.1:3822 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3829 -msgid "" -"Set the article header field ''Organization:'' to the contents of the " -"variable instead of the system default. If it points to a readable file a " -"random line from that file will be used. If reading news on an Apollo " -"DomainOS machine the environment variable $B has to be used instead " -"of $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3832 -msgid "DomainOS specific, same as $B on other OSs (see above)." -msgstr "" - -#. type: TP -#: doc/tin.1:3832 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3837 -msgid "" -"Set the article header field ''Reply-To:'' to the return address specified " -"by the variable. This is useful if you wish to receive replies at a " -"different address." -msgstr "" - -#. type: TP -#: doc/tin.1:3837 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3841 -msgid "" -"Overrides the full name given in the gecos-field in I, see also " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:3841 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3844 -msgid "Same as $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3844 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3849 -msgid "" -"Pathname of the user's home directory. See B<\\%environ>(5) for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3849 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3853 -msgid "" -"This variable has precedence over the default mailer that is used in all " -"mailing operations within B." -msgstr "" - -#. type: TP -#: doc/tin.1:3853 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3856 -msgid "Full path to the user's mailbox." -msgstr "" - -#. we don't support the %message || ?message notation -#. type: TP -#: doc/tin.1:3856 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3861 -#, fuzzy -msgid "" -"A colon-separated list of filenames which are checked for new mail. This " -"overrides the $B variable." -msgstr "" -"Una lista de nombres de archivos separados por dos puntos que se comprueban " -"en busca de correo nuevo. Esto anula la variable $B." - -#. type: TP -#: doc/tin.1:3861 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3870 -msgid "" -"This variable has precedence over the default editor (i.e., B<\\%vi>(1)) " -"that is used in all editing operations within B (e.g., posting, " -"replying, follow-ups, ...). Evaluation order is I<${VISUAL:-\"${EDITOR:-" -"vi}\"}>. See B<\\%environ>(5) for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3870 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3879 -msgid "" -"If $B is unset, then this variable is looked up for a default " -"editor. If $B and $B are both unset, B uses the systems " -"default editor (i.e. B<\\%vi>(1) on UNIX-systems). See B<\\%environ>(5) " -"for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3879 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3885 -msgid "" -"A new group is checked against the list of patterns; if it matches, B " -"subscribes the user to the group without further query. See the section " -"\"NEWSGROUP LISTS & WILDCARDS\" for an explanation of the valid syntax. For " -"example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3887 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3892 -msgid "" -"will automatically subscribe the user to all new groups in the comp.os.unix " -"hierarchy, and all talk groups other than talk.politics groups (which will " -"be queried for as usual). Of course this does not work if B is started " -"with the ''B<-X>'' command-line switch." -msgstr "" - -#. type: TP -#: doc/tin.1:3892 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3896 -msgid "" -"Is handled like the $B variable, but groups matching the list " -"are unsubscribed from without further query. For example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3898 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3902 -msgid "" -"will automatically unsubscribe the user from all new alt.flame groups and " -"all groups starting with u (university groups) other than UK groups (which " -"will be queried for as usual)." -msgstr "" - -#. type: TP -#: doc/tin.1:3902 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3906 -msgid "" -"A pathname of a directory made available for B to create temporary " -"files." -msgstr "" - -#. type: TP -#: doc/tin.1:3906 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3912 -msgid "" -"This variable can be used to override the default path search for B<\\" -"%mailcap>(5) files. See also B<\\%tin>(5)." -msgstr "" - -#. type: TP -#: doc/tin.1:3912 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3917 -msgid "" -"Set this variable to disable the use of B<\\%metamail>(1) or a replacement " -"(e.g., metamutt)." -msgstr "" - -#. type: TP -#: doc/tin.1:3917 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3921 -msgid "" -"MIME character set used if not configured via the tinrc variable " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:3921 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3926 -msgid "" -"Set this variable to point to B<\\%ispell>(1) or a replacement and its cmd-" -"line options." -msgstr "" - -#. type: TP -#: doc/tin.1:3926 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3933 -msgid "" -"Define any additional options that you wish to pass to your B<\\%pgp>(1) or " -"B<\\%gpg>(1) program." -msgstr "" - -#. type: TP -#: doc/tin.1:3933 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3938 -msgid "" -"Override the name of the B<\\%pgp>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" - -#. type: TP -#: doc/tin.1:3938 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3943 -msgid "" -"Override the name of the B<\\%gpg>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" - -#. type: TP -#: doc/tin.1:3943 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3955 -msgid "" -"This variable determines the B<\\%locale>(5) category for character " -"handling functions. Usually it determines the character classes for pattern " -"matching character classification and case conversion. Currently this is not " -"true for B (which temporary unsets B<$LC_CTYPE> right before any match " -"is done to avoid confusion). Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%environ>(5) " -"for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3955 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3964 -msgid "" -"Formats of informative and diagnostic messages and interactive responses. " -"Its value should be of the form I[I<_territory>][I<.codeset>]" -"[I<@modifier>]. See B<\\%locale>(5) and B<\\%environ>(5) for more " -"information." -msgstr "" - -#. type: TP -#: doc/tin.1:3964 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3972 -msgid "" -"Numeric value formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3972 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3980 -msgid "" -"Date and time formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3980 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3989 -msgid "" -"This variable overrides the value of the B<$LANG> variable and any other " -"B<$LC_> variable. Its value should be of the form I[I<_territory>]" -"[I<.codeset>]. See B<\\%locale>(5) and B<\\%environ>(5) for more " -"information." -msgstr "" - -#. type: TP -#: doc/tin.1:3989 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:3998 -msgid "" -"This variable determines the B<\\%locale>(5) category for any category not " -"specifically selected with a variable starting with B<$LC_>. Its value " -"should be of the form I[I<_territory>][I<.codeset>]. See B<\\" -"%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3998 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4006 -msgid "" -"This variable defines a priority list for translations. Whenever a " -"translation is not available the next language from the list is tried. Its " -"value should be of the form I. Requires " -"B<$LC_ALL> or B<$LANG> to be set. See B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:4006 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4016 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred width in " -"column positions for the terminal screen or window. If this variable is " -"unset or null, the implementation determines the number of columns, " -"appropriate for the terminal or window. When B<$COLUMNS> is set, any " -"terminal-width information implied by B<$TERM> will be overridden. Users and " -"portable applications should not set B<$COLUMNS> unless they wish to " -"override the system selection and produce output unrelated to the terminal " -"characteristics." -msgstr "" - -#. type: TP -#: doc/tin.1:4016 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4026 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred number of " -"lines on a page or the vertical screen or window size in lines. A line in " -"this case is a vertical measure large enough to hold the tallest character " -"in the character set being displayed. If this variable is unset or null, the " -"implementation determines the number of lines, appropriate for the terminal " -"or window. When B<$LINES> is set, any terminal-height information implied by " -"B<$TERM> will be overridden. Users and portable applications should not set " -"B<$LINES> unless they wish to override the system selection." -msgstr "" - -#. type: TP -#: doc/tin.1:4026 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4032 -msgid "" -"The type of terminal in use. This is used when looking up termcap " -"sequences. See B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:4032 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4035 -msgid "Display name, pointing to the X server; required for xface." -msgstr "" - -#. type: TP -#: doc/tin.1:4035 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4039 -msgid "" -"Used for determining terminal's X window id; required for xface. Should be " -"set by the terminal emulator." -msgstr "" - -#. type: TP -#: doc/tin.1:4039 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4043 -msgid "" -"The pathname of the user's login shell. Used to set B." -msgstr "" - -#. type: TP -#: doc/tin.1:4043 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4048 -msgid "" -"The pathname of the user's dir to put non-essential run time files into." -msgstr "" - -#. type: SH -#: doc/tin.1:4048 -#, no-wrap -msgid "SIGNALS" -msgstr "SEÑALES" - -#. TODO: add missing, sort useful, document in detail -#. type: Plain text -#: doc/tin.1:4052 -msgid "B handles a couple of signals:" -msgstr "" - -#. type: TP -#: doc/tin.1:4052 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4055 doc/tin.1:4058 -msgid "Terminate gracefully." -msgstr "" - -#. type: TP -#: doc/tin.1:4055 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.1:4058 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.1:4061 -msgid "Terminate gracefully but do not restore terminal (tty)." -msgstr "" - -#. type: TP -#: doc/tin.1:4061 -#, no-wrap -msgid "B" -msgstr "B" - -# -# -#. .SH DIAGNOSTICS -#. give an overview of the most common error messages and how to cope with -#. them. -#. type: Plain text -#: doc/tin.1:4072 -msgid "Write out I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>-file." -msgstr "" - -#. type: SH -#: doc/tin.1:4072 -#, no-wrap -msgid "SECURITY" -msgstr "GARANTÍA" - -#. type: Plain text -#: doc/tin.1:4078 -msgid "" -"If B is started in debug mode (''B<-D n>'') it will create world " -"readable files in B<$TMPDIR> which may contain sensitive data like the users " -"NNTP password in cleartext (if running verbose). On multiuser-systems " -"B<$TMPDIR> should be set to a safe location before starting B in " -"(verbose) debug mode (e.g., B)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4082 -msgid "" -"Using the ''B<-k>'' option to skip certificate verification makes the " -"session insecure as the server's certificate is not checked; avoid this " -"option whenever possible." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4089 -msgid "" -"If the server does not initially require authentication but supports " -"compression and compression is requested, B will exit when " -"authentication is required later on. Using the ''B<-A>'' command line option " -"in conjunction with ''B<-C>'' circumvents this behavior." -msgstr "" - -#. type: SH -#: doc/tin.1:4089 -#, no-wrap -msgid "CONFORMING TO" -msgstr "CONFORME A" - -#. - RFC\%2045, RFC\%2047, RFC\%2231, RFC\%2980, RFC\%3977, RFC\%4155 -#. RFC\%4643, RFC\%5322, RFC\%5536, RFC\%5537, RFC\%6048 or whatever -#. type: Plain text -#: doc/tin.1:4097 -msgid "" -"B does conform to the Base Definitions volume of IEEE Std 1003.1-2008, " -"Section 12, Utility Conventions (Utility Argument Syntax, Utility Syntax " -"Guidelines)." -msgstr "" - -#. type: SH -#: doc/tin.1:4097 -#, no-wrap -msgid "NOTES" -msgstr "ANOTACIONES" - -#. type: Plain text -#: doc/tin.1:4104 -msgid "" -"Regular expression support is provided by the PCRE library package B<\\" -"%pcre>(3) or B<\\%pcre2>(3) which is open source software, written by " -"Philip Hazel, and copyright \\(co by the University of Cambridge, England." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4108 -msgid "Ehttps://www.pcre.org/E" -msgstr "Ehttps://www.pcre.org/E" - -#. type: SH -#: doc/tin.1:4108 -#, no-wrap -msgid "BUGS" -msgstr "DEFECTOS" - -#. type: Plain text -#: doc/tin.1:4116 -msgid "" -"B\\0NNTPd, B<\\%noffle>(1) (E= V1.0-pre5) and B " -"(E= V1.1.91) can't handle pipelined GROUP commands (B). If " -"you run into trouble with any of the mentioned historical servers define " -"DISABLE_PIPELINING in include/autoconf.h and recompile." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4123 -msgid "" -"Using the ''B<-C>'' (COMPRESS) flag with B\\0nnrpd versions between " -"2.6.1 and 2.7.1 (both incl.) may cause B to hang and later timeout when " -"posting. This has been fixed in B\\0nnrpd version 2.7.2. As a " -"workaround simply don't use ''B<-C>''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4132 -msgid "" -"Before mailing a bug-report to Etin-bugs@tin.orgE please check if " -"you are using the latest (stable) release, and if not, please upgrade first! " -"Have a look at the doc/TODO file for known bugs. If you still think you've " -"found a bug, please use the B ('B') function and write in " -"English. Please do NOT enclose a core-file in your bug-report until we " -"request it." -msgstr "" - -#. type: SH -#: doc/tin.1:4132 -#, no-wrap -msgid "HISTORY" -msgstr "HISTORIAL" - -#. type: Plain text -#: doc/tin.1:4141 -msgid "" -"B is based on the B<\\%tass>(1) newsreader that was developed by Rich " -"Skrenta and posted to alt.sources in March 1991; its first version was " -"released on August 23rd 1991. B<\\%tass>(1) itself was heavily influenced " -"by notesfiles a public domain UNIX version of PLATO Notes, developed at the " -"University of Illinois by Ray Essick and Rob Kolstad in 1982. For a version " -"overview see" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4145 -msgid "Ehttp://www.tin.org/history.htmlE." -msgstr "Ehttp://www.tin.org/history.htmlE." - -#. type: SH -#: doc/tin.1:4145 -#, no-wrap -msgid "CREDITS" -msgstr "DERECHOS" - -#. type: IP -#: doc/tin.1:4146 -#, no-wrap -msgid "Rich Skrenta" -msgstr "Rich Skrenta" - -#. type: Plain text -#: doc/tin.1:4150 -msgid "author of B<\\%tass>(1) v3.2 which this newsreader used as its base." -msgstr "" - -#. type: IP -#: doc/tin.1:4150 -#, no-wrap -msgid "Bill Davidsen" -msgstr "Bill Davidsen" - -#. type: Plain text -#: doc/tin.1:4152 -msgid "author of envarg.c environment variable reading routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4152 -#, no-wrap -msgid "Mike Gleason" -msgstr "Mike Gleason" - -#. type: Plain text -#: doc/tin.1:4154 -msgid "author of sigfile.c random signature generation routines." -msgstr "" - -#. type: IP -#: doc/tin.1:4154 -#, no-wrap -msgid "Markus Kuhn EMarkus.Kuhn@cl.cam.ac.ukE" -msgstr "Markus Kuhn EMarkus.Kuhn@cl.cam.ac.ukE" - -#. type: Plain text -#: doc/tin.1:4156 -msgid "" -"author of langinfo.c, charset.c and iso2asc.txt ISO-8859-1 documentation." -msgstr "" - -#. type: IP -#: doc/tin.1:4156 -#, no-wrap -msgid "Arnold D. Robbins" -msgstr "Arnold D. Robbins" - -#. type: Plain text -#: doc/tin.1:4158 -msgid "author of strftime.c date formatting routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4158 -#, no-wrap -msgid "Rich Salz" -msgstr "Rich Salz" - -#. type: Plain text -#: doc/tin.1:4160 -msgid "" -"author of wildmat.c pattern matching and parsdate.y date parsing routines." -msgstr "" - -#. type: IP -#: doc/tin.1:4160 -#, no-wrap -msgid "Dave Taylor" -msgstr "Dave Taylor" - -#. type: Plain text -#: doc/tin.1:4164 -msgid "author of curses.c from the B<\\%elm>(1) mailreader." -msgstr "" - -#. type: IP -#: doc/tin.1:4164 -#, no-wrap -msgid "Chris Thewalt" -msgstr "Chris Thewalt" - -#. type: Plain text -#: doc/tin.1:4168 -msgid "author of getline.c B<\\%emacs>(1) style editing routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4168 -#, no-wrap -msgid "Steven Madsen" -msgstr "Steven Madsen" - -#. type: Plain text -#: doc/tin.1:4172 -msgid "for adding B<\\%pgp>(1) (Pretty Good Privacy) support." -msgstr "" - -#. type: IP -#: doc/tin.1:4172 -#, no-wrap -msgid "Philip Hazel Eph10@cam.ac.ukE" -msgstr "Philip Hazel Eph10@cam.ac.ukE" - -#. type: Plain text -#: doc/tin.1:4177 -msgid "" -"for B<\\%pcre>(3), B<\\%pcre2>(3) (Perl-compatible regular expression " -"library)." -msgstr "" - -#. type: IP -#: doc/tin.1:4177 -#, no-wrap -msgid "Mark Martinec Emark.martinec@ijs.siE" -msgstr "Mark Martinec Emark.martinec@ijs.siE" - -#. type: Plain text -#: doc/tin.1:4185 -msgid "for B<\\%snprintf>(3) and B<\\%vsnprintf>(3) fallbacks." -msgstr "" - -#. type: SH -#: doc/tin.1:4185 -#, no-wrap -msgid "AUTHOR" -msgstr "AUTOR" - -#. type: TP -#: doc/tin.1:4186 -#, no-wrap -msgid "Iain Lea Eiain@bricbrac.deE" -msgstr "Iain Lea Eiain@bricbrac.deE" - -#. type: SH -#: doc/tin.1:4190 -#, no-wrap -msgid "MAINTAINER" -msgstr "RESPONSABLE" - -#. type: TP -#: doc/tin.1:4191 -#, no-wrap -msgid "Urs Janssen Eurs@tin.orgE" -msgstr "Urs Janssen Eurs@tin.orgE" - -#. type: SH -#: doc/tin.1:4195 doc/tin.5:2890 -#, no-wrap -msgid "SEE ALSO" -msgstr "VEA ADEMÁS" - -#. type: Plain text -#: doc/tin.1:4259 -msgid "" -"B<\\%elm>(1), B<\\%emacs>(1), B<\\%gpg>(1), B<\\%inews>(1), B<\\%ispell>(1), " -"B<\\%lp>(1), B<\\%lpr>(1), B<\\%metamail>(1), B<\\%mutt>(1), B<\\" -"%noffle>(1), B<\\%perl>(1), B<\\%perlre>(1), B<\\%pgp>(1), B<\\%rn>(1), B<\\" -"%sendmail>(1), B<\\%shar>(1), B<\\%slrnface>(1), B<\\%tass>(1), B<\\" -"%unshar>(1), B<\\%uudecode>(1), B<\\%vi>(1), B<\\%xterm>(1x), B<\\" -"%heapsort>(3), B<\\%iconv>(3), B<\\%iconv_open>(3), B<\\%nl_langinfo>(3), " -"B<\\%pcre>(3), B<\\%pcre2>(3), B<\\%pcrepattern>(3), B<\\%pcre2pattern>(3), " -"B<\\%qsort>(3), B<\\%snprintf>(3), B<\\%strftime>(3), B<\\%vsnprintf>(3), " -"B<\\%wildmat>(3), B<\\%environ>(5), B<\\%locale>(5), B<\\%mailcap>(5), B<\\" -"%mbox>(5), B<\\%mmdf>(5), B<\\%newsoverview>(5), B<\\%tin>(5), B<\\" -"%cron>(8), B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B" -msgstr "" -"B<\\%elm>(1), B<\\%emacs>(1), B<\\%gpg>(1), B<\\%inews>(1), B<\\%ispell>(1), " -"B<\\%lp>(1), B<\\%lpr>(1), B<\\%metamail>(1), B<\\%mutt>(1), B<\\" -"%noffle>(1), B<\\%perl>(1), B<\\%perlre>(1), B<\\%pgp>(1), B<\\%rn>(1), B<\\" -"%sendmail>(1), B<\\%shar>(1), B<\\%slrnface>(1), B<\\%tass>(1), B<\\" -"%unshar>(1), B<\\%uudecode>(1), B<\\%vi>(1), B<\\%xterm>(1x), B<\\" -"%heapsort>(3), B<\\%iconv>(3), B<\\%iconv_open>(3), B<\\%nl_langinfo>(3), " -"B<\\%pcre>(3), B<\\%pcre2>(3), B<\\%pcrepattern>(3), B<\\%pcre2pattern>(3), " -"B<\\%qsort>(3), B<\\%snprintf>(3), B<\\%strftime>(3), B<\\%vsnprintf>(3), " -"B<\\%wildmat>(3), B<\\%environ>(5), B<\\%locale>(5), B<\\%mailcap>(5), B<\\" -"%mbox>(5), B<\\%mmdf>(5), B<\\%newsoverview>(5), B<\\%tin>(5), B<\\" -"%cron>(8), B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B" - -#. type: Plain text -#: doc/tin.5:13 -msgid "tin, rtin - related files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:20 -msgid "" -"This man page describes the various (config) files and their formats used by " -"the B<\\%tin>(1) newsreader. All files are expected to have unix style " -"('\\(rsn' aka LF) line endings." -msgstr "" - -#. type: Plain text -#: doc/tin.5:61 -msgid "" -"B<\\%mailcap>(5) files as defined in B. The mailcap files are " -"read by B<\\%tin>(1) to determine how to display non-text messages at the " -"local site. Any line that starts with \"#\" is a comment. Blank lines are " -"ignored. Otherwise, each line defines a single mailcap entry for a single " -"content type. Long lines may be continued by ending them with a backslash " -"character, \"\\(rs\"." -msgstr "" - -#. type: Plain text -#: doc/tin.5:64 -msgid "" -"Each individual mailcap entry consists of a content-type specification, a " -"command to execute, and (possibly) a set of optional \"flag\" values." -msgstr "" - -#. type: Plain text -#: doc/tin.5:69 -msgid "" -"The \"type\" field is simply any legal content type name. It is the string " -"that will be matched against the ''Content-Type:'' header to decide if this " -"is the mailcap entry that matches the current message. Additionally, the " -"type field may specify a subtype or a wildcard to match all subtypes." -msgstr "" - -#. type: Plain text -#: doc/tin.5:75 -msgid "" -"The \"command\" field is any UNIX command and is used to specify the " -"interpreter for the given type of message. It will be passed to the shell " -"via the B<\\%system>(3) facility." -msgstr "" - -# -#. Two special codes can appear in the viewing command for objects of type -#. multipart (any subtype). These are "%n" and "%F". %n will be replaced by -#. the number of parts within the multipart object. %F will be replaced by a -#. series of arguments, two for each part, giving first the content-type and -#. then the name of the temporary file where the decoded part has been stored. -#. type: Plain text -#: doc/tin.5:92 -msgid "" -"Semicolons and backslashes within the command or any flag field must be " -"quoted with backslashes. If the field contains \"%s\", those two characters " -"will be replaced by the name of a file that contains the body of the " -"message. If it contains \"%t\", those two characters will be replaced by the " -"content-type field, including the subtype, if any. If it contains \"%{\" " -"followed by a parameter name and a closing \"}\", then all those characters " -"will be replaced by the value of the named parameter, if any, from the " -"\\&''Content-Type:'' header. Finally, if the field contains \"\\(rs%\", " -"those two characters will be replaced by a single \"%\" character." -msgstr "" - -#. type: Plain text -#: doc/tin.5:94 -msgid "Besides the type and command field the following \"flags\" are defined:" -msgstr "" - -#. type: TP -#: doc/tin.5:94 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:104 -msgid "" -"The \"compose\" field may be used to specify a program that can be used to " -"compose a new body or body part in the given format. Its intended use is to " -"support mail composing agents that support the composition of multiple types " -"of mail using external composing agents. As with the view-command, the " -"semantics of program execution are operating system dependent. The result of " -"the composing program may be data that is not yet suitable for mail " -"transport \\(em that is, a Content-Transfer-Encoding may need to be applied " -"to the data." -msgstr "" - -#. type: TP -#: doc/tin.5:104 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:114 -msgid "" -"The \"composetyped\" field is similar to the \"compose\" field, but is to be " -"used when the composing program needs to specify the ''Content-Type:'' " -"header field to be applied to the composed data. The \"compose\" field is " -"simpler, and is preferred for use with existing (non-mail-oriented) programs " -"for composing data in a given format. The \"composetyped\" field is " -"necessary when the Content-Type information must include auxiliary " -"parameters, and the composition program must then know enough about mail " -"formats to produce output that includes the mail type information." -msgstr "" - -#. type: TP -#: doc/tin.5:114 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:120 -msgid "" -"The \"edit\" field may be used to specify a program that can be used to edit " -"a body or body part in the given format. In many cases, it may be identical " -"in content to the \"compose\" field, and shares the operating-system " -"dependent semantics for program execution." -msgstr "" - -#. type: TP -#: doc/tin.5:120 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:125 -msgid "" -"The \"print\" field may be used to specify a program that can be used to " -"print a message or body part in the given format. As with the view-command, " -"the semantics of program execution are operating system dependent." -msgstr "" - -#. type: TP -#: doc/tin.5:125 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:134 -msgid "" -"The \"test\" field may be used to test some external condition (e.g., the " -"machine architecture, or the window system in use) to determine whether or " -"not the mailcap line applies. It specifies a program to be run to test some " -"condition. The semantics of execution and of the value returned by the test " -"program are operating system dependent. If the test fails, a subsequent " -"mailcap entry should be sought. Multiple test fields are not permitted \\(em " -"since a test can call a program, it can already be arbitrarily complex." -msgstr "" - -#. type: TP -#: doc/tin.5:134 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:146 -msgid "" -"The \"needsterminal\" field indicates that the view-command must be run on " -"an interactive terminal. This is needed to inform window-oriented user " -"agents that an interactive terminal is needed. (The decision is not left " -"exclusively to the view-command because in some circumstances it may not be " -"possible for such programs to tell whether or not they are on interactive " -"terminals.) The needsterminal command should be assumed to apply to the " -"compose and edit commands, too, if they exist. Note that this is NOT a test " -"- it is a requirement for the environment in which the program will be " -"executed, and should typically cause the creation of a terminal window when " -"not executed on either a real terminal or a terminal window." -msgstr "" - -#. type: TP -#: doc/tin.5:146 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:153 -msgid "" -"The \"copiousoutput\" field indicates that the output from the view-command " -"will be an extended stream of output, and is to be interpreted as advice to " -"the UA (User Agent mail-reading program) that the output should be either " -"paged or made scroll-able. Note that it is probably a mistake if " -"needsterminal and copiousoutput are both specified." -msgstr "" - -#. type: TP -#: doc/tin.5:153 doc/tin.5:1172 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:158 -msgid "" -"The \"description\" field simply provides a textual description, optionally " -"quoted, that describes the type of data, to be used optionally by mail " -"readers that wish to describe the data before offering to display it." -msgstr "" - -#. type: TP -#: doc/tin.5:158 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:166 -msgid "" -"The \"textualnewlines\" field, if set to any non-zero value, indicates that " -"this type of data is line-oriented and that, if encoded in base64, all " -"newlines should be converted to canonical form (CRLF) before encoding, and " -"will be in that form after decoding. In general, this field is needed only " -"if there is line-oriented data of some type other than text/* or non-line- " -"oriented data that is a subtype of text." -msgstr "" - -#. type: TP -#: doc/tin.5:166 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:171 -msgid "" -"The \"x11-bitmap\" field names a file, in X11 bitmap (xbm) format, which " -"points to an appropriate icon to be used to visually denote the presence of " -"this kind of data." -msgstr "" - -#. type: TP -#: doc/tin.5:171 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:179 -msgid "" -"The \"nametemplate\" field gives a filename format, in which %s will be " -"replaced by a short unique string to give the name of the temporary file to " -"be passed to the viewing command. This is only expected to be relevant in " -"environments where filename extensions are meaningful, e.g., one could " -"specify that a GIF file being passed to a gif viewer should have a name " -"ending in \".gif\" by using \"nametemplate=%s.gif\"" -msgstr "" - -#. type: Plain text -#: doc/tin.5:184 -msgid "" -"B<\\%tin>(1) currently only respects the \"test\", \"description\", " -"\"nametemplate\" and partly the \"needsterminal\" flags, all other flags are " -"internally ignored. It also can't handle the \"%F\" and \"%n\" expansions " -"yet." -msgstr "" - -#. type: TP -#: doc/tin.5:184 doc/tin.5:272 doc/tin.5:302 doc/tin.5:393 doc/tin.5:724 -#: doc/tin.5:889 doc/tin.5:1201 -#, no-wrap -msgid "Example:" -msgstr "" - -#. type: Plain text -#: doc/tin.5:189 -#, no-wrap -msgid "# mailcap file example\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:191 -#, no-wrap -msgid "image/*;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:194 -#, no-wrap -msgid "xv -8 -geometry +0 '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:196 -#, no-wrap -msgid "description=%{name} %t-Image;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:198 -#, no-wrap -msgid "test=test \"$DISPLAY\" != \"\";\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:200 -#, no-wrap -msgid "nametemplate=%s.IMAGE\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:203 -#, no-wrap -msgid "message/rfc822;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:206 -#, no-wrap -msgid "${PAGER:-\"more\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:208 -#, no-wrap -msgid "edit=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:210 -#, no-wrap -msgid "compose=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:212 -#, no-wrap -msgid "print=a2ps '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:214 -#, no-wrap -msgid "needsterminal\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:227 -msgid "" -"default NNTP-server to read news from if not reading from the local spool. " -"\\&'B<-g> I', $B have higher priority (in that order), " -"the default server given at compile time has lower priority." -msgstr "" - -#. type: Plain text -#: doc/tin.5:237 -msgid "" -"secret to be used for cancel-locks if B<\\%tin>(1) is built with support " -"for it. An empty secret file disables the cancel-lock creation in that case. " -"This file should be readable only by the user." -msgstr "" - -#. type: Plain text -#: doc/tin.5:248 -msgid "mime type / filename extension pairs" -msgstr "" - -#. type: Plain text -#: doc/tin.5:261 -msgid "" -"\"I I [I]\" pairs for NNTP servers that " -"require authorization. If the password contains a space or a tab it must be " -"enclosed in double quotes (\"). Usernames must not be enclosed in double " -"quotes and thus can't contain spaces or tabs. Any line that starts with " -"\"#\" is a comment. Blank lines are ignored. This file should be readable " -"only for the user as it contains the user's unencrypted password for reading " -"news!" -msgstr "" - -#. type: TP -#: doc/tin.5:261 doc/tin.5:1185 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:265 -msgid "" -"full qualified domain name of the news server. Additionally, a port can be " -"specified by appending :portnumber." -msgstr "" - -# fuzzy -#. type: TP -#: doc/tin.5:265 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:268 -msgid "user's unencrypted password for reading news." -msgstr "" - -# fuzzy -#. type: TP -#: doc/tin.5:268 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:272 -msgid "" -"username on the news server if it differs from the local login. This field " -"is optional." -msgstr "" - -#. type: Plain text -#: doc/tin.5:276 -msgid "# sample .newsauth file" -msgstr "" - -#. type: Plain text -#: doc/tin.5:278 -msgid "news.example.org secret" -msgstr "" - -#. type: Plain text -#: doc/tin.5:280 -msgid "news.example.net arcane guest" -msgstr "" - -#. type: Plain text -#: doc/tin.5:282 -msgid "news.example.com \"top secret\" james.bond@example.com" -msgstr "" - -#. type: Plain text -#: doc/tin.5:291 -msgid "" -"\"II [I
[,I
| -I
]...]\" lines." -msgstr "" - -#. type: TP -#: doc/tin.5:291 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:294 -msgid "the name of the newsgroup." -msgstr "" - -#. type: TP -#: doc/tin.5:294 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:297 -msgid "a flag indicating if the group is subscribed ':' or not '!\\&'." -msgstr "" - -#. type: TP -#: doc/tin.5:297 -#, no-wrap -msgid "B
" -msgstr "" - -#. type: Plain text -#: doc/tin.5:302 -msgid "" -"range of already read articles from that group; numbers separated by commas " -"with sequential numbers collapsed with hyphens. Empty lines and lines which " -"start with \"#\" are ignored and not written back." -msgstr "" - -#. type: Plain text -#: doc/tin.5:306 -msgid "# sample .newsrc file" -msgstr "" - -#. type: Plain text -#: doc/tin.5:308 -msgid "news.software.b! 1-666,669" -msgstr "" - -#. type: Plain text -#: doc/tin.5:310 -msgid "news.software.nntp: 1-13245,13247,13249" -msgstr "" - -#. type: Plain text -#: doc/tin.5:312 -msgid "news.software.readers: 1-19567,19571-19597" -msgstr "" - -#. type: Plain text -#: doc/tin.5:322 -msgid "backup of I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "" - -#. type: Plain text -#: doc/tin.5:331 -msgid "signature" -msgstr "signature" - -#. type: Plain text -#: doc/tin.5:338 -msgid "fixed part of a randomly generated signature, this will be added first" -msgstr "" - -#. type: Plain text -#: doc/tin.5:345 -msgid "history of last used strings" -msgstr "" - -#. type: Plain text -#: doc/tin.5:352 -msgid "mailgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:361 -msgid "newsgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:368 -msgid "saved newsgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:378 -msgid "" -"active file (\"I I I I\" " -"quadruples) of user's mailgroups (requires B<\\%tin>(1) to be built with mh-" -"mail-handling support)." -msgstr "" - -#. type: TP -#: doc/tin.5:378 doc/tin.5:1169 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:382 -msgid "" -"must be the pathname of the mailbox relative to field #4 with '/' changed to " -"'.\\&'" -msgstr "" - -#. type: TP -#: doc/tin.5:382 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:386 -msgid "" -"just put a large number here, something higher than the highest message in " -"the mailbox" -msgstr "" - -#. type: TP -#: doc/tin.5:386 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:389 -msgid "put 0 here" -msgstr "" - -#. type: TP -#: doc/tin.5:389 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:393 -msgid "" -"path of mail spool directory. This must be the full pathname to the root of " -"the mail folder area." -msgstr "" - -#. type: Plain text -#: doc/tin.5:397 -msgid "Mail.inbox 12345 00000 /home/foo" -msgstr "" - -#. type: Plain text -#: doc/tin.5:399 -msgid "Mail.outbox 23456 00000 /home/foo" -msgstr "" - -#. type: Plain text -#: doc/tin.5:403 -msgid "" -"This allows access to the 'inbox' and 'outbox' folders of user foo. They " -"are accessed via /home/foo/Mail/inbox and /home/foo/Mail/outbox" -msgstr "" - -#. type: Plain text -#: doc/tin.5:410 -msgid "active file of user's saved newsgroups, used by B." -msgstr "" - -#. type: Plain text -#: doc/tin.5:432 -msgid "" -"The group attributes files may be used to override some global settings from " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc> on a per group basis. Order is " -"important as last match counts; this allows one to refine attributes for " -"narrowed scopes. Note that the IgrouplistE> line has to be " -"specified before the attributes are specified for that list and each " -"attribute can only be set once per scope section. All attributes are set to " -"a reasonable default so you only have to specify the attribute that you want " -"to change. All toggle attributes are set by specifying ON/OFF. Otherwise, " -"they function exactly as their global equivalents. The following group " -"attributes are available:" -msgstr "" - -#. type: TP -#: doc/tin.5:432 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:438 -msgid "" -"This changes the list of groups to which the attributes that follow will be " -"applied. See the section NEWSGROUP LISTS & WILDCARDS in B<\\%tin>(1) for " -"the types of pattern that can be used here." -msgstr "" - -#. type: TP -#: doc/tin.5:438 doc/tin.5:1347 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:441 doc/tin.5:444 doc/tin.5:447 doc/tin.5:450 doc/tin.5:453 -#: doc/tin.5:456 doc/tin.5:469 doc/tin.5:479 doc/tin.5:482 doc/tin.5:495 -#: doc/tin.5:498 doc/tin.5:501 doc/tin.5:504 doc/tin.5:507 doc/tin.5:514 -#: doc/tin.5:517 doc/tin.5:544 doc/tin.5:547 doc/tin.5:550 doc/tin.5:561 -#: doc/tin.5:564 doc/tin.5:567 doc/tin.5:570 doc/tin.5:573 doc/tin.5:576 -#: doc/tin.5:579 doc/tin.5:582 doc/tin.5:585 doc/tin.5:588 doc/tin.5:594 -#: doc/tin.5:597 doc/tin.5:600 doc/tin.5:603 doc/tin.5:606 doc/tin.5:609 -#: doc/tin.5:612 doc/tin.5:618 doc/tin.5:621 doc/tin.5:624 doc/tin.5:627 -#: doc/tin.5:630 doc/tin.5:633 doc/tin.5:636 doc/tin.5:639 doc/tin.5:642 -#: doc/tin.5:645 doc/tin.5:703 -msgid "Identical to the tinrc variable of the same name" -msgstr "" - -#. type: TP -#: doc/tin.5:441 doc/tin.5:1351 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:444 doc/tin.5:1354 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:447 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:450 doc/tin.5:1403 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:453 doc/tin.5:1407 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:456 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:460 -msgid "" -"Automatically perform the B ('B') command after " -"entering the group." -msgstr "" - -#. type: TP -#: doc/tin.5:460 doc/tin.5:1414 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:466 -msgid "" -"Can be used to override the global setting in tinrc on a per group basis. " -"For more information read section AUTOMATIC MAILING AND SAVING NEW NEWS in " -"B<\\%tin>(1)." -msgstr "" - -#. type: TP -#: doc/tin.5:466 doc/tin.5:1551 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:469 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:476 -msgid "" -"If this is set to ON, then saved article files that have been post-processed " -"will be automatically deleted, otherwise the user will be asked whether to " -"delete the post-processed files. Automatic processing of marked articles " -"using B ('B') will suppress prompting." -msgstr "" - -#. type: TP -#: doc/tin.5:476 doc/tin.5:1672 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:479 doc/tin.5:1679 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:482 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:486 -msgid "" -"Mailbox to save sent mails. The format of the mailbox is controlled via the " -"tinrc B variable." -msgstr "" - -#. type: TP -#: doc/tin.5:486 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:489 -msgid "Set ''Followup-To:'' header to the specified group(s)." -msgstr "" - -#. type: TP -#: doc/tin.5:489 doc/tin.5:802 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:492 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:492 doc/tin.5:1714 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:495 doc/tin.5:1717 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:498 doc/tin.5:1797 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:501 doc/tin.5:1809 doc/tin.5:2666 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:504 doc/tin.5:1829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:507 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:511 -msgid "" -"Used when a group is a mailing list. All responses to the group will be " -"directed to this email address instead" -msgstr "" - -#. type: TP -#: doc/tin.5:511 doc/tin.5:1867 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:514 doc/tin.5:1864 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:517 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:534 -msgid "" -"Determines whether usenet articles are forwarded as attachment or inline. " -"When set to OFF, the forwarded article will be included in the body of the " -"mail, while setting this variable to ON will cause the article to be " -"attached as a separate MIME part. Enabling B is particularly " -"useful for articles consisting of multiple MIME parts such as PGP/MIME " -"signed messages or being encoded in a different character set than your " -"local one. It is also useful if the receiver should be able to operate on " -"the entire forwarded article (i.e., view or save it without your comments). " -"On the other hand, if you want to forward only some parts of the article or " -"to insert 'inline' annotations, you might want to disable this option. " -"Currently mime_forward is forced if the article to be attached is a " -"multipart MIME article, this may change in a future version. Please note " -"that for this option to have effect, the tinrc variable " -"B has to be set to 0 (which is the default)." -msgstr "" - -#. type: TP -#: doc/tin.5:534 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:541 -msgid "" -"A comma separated list of MIME major/minor Content-Types that will be saved " -"when using the view/save and save/autosave features. A single * can be used " -"to wildcard the major and/or minor type and a ! as the first character in an " -"entry will negate it, eg: image/*,!image/bmp,!text/html. Default is */*" -msgstr "" - -#. type: TP -#: doc/tin.5:541 doc/tin.5:1950 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:544 doc/tin.5:1957 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:547 doc/tin.5:1966 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:550 doc/tin.5:2639 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:558 -msgid "" -"This can be used to set the article header field ''Organization:''. It " -"overrides the setting (if any) of organization in I " -"and $B (or $B on Apollo DomainOS). If it points to a " -"readable file a random line from that file will be used. Note that some news " -"servers might still overwrite the \\&''Organization:'' header." -msgstr "" - -#. type: TP -#: doc/tin.5:558 doc/tin.5:2009 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:561 doc/tin.5:2013 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:564 doc/tin.5:2024 doc/tin.5:2663 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:567 doc/tin.5:2037 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:570 doc/tin.5:2029 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:573 doc/tin.5:2061 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:576 doc/tin.5:2075 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:579 doc/tin.5:2079 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:582 doc/tin.5:2083 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:585 doc/tin.5:2148 -#, no-wrap -msgid "B" -msgstr "B" - -#. TODO: document option -#. type: TP -#: doc/tin.5:588 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:591 doc/tin.5:2224 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:594 doc/tin.5:2207 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:597 doc/tin.5:2256 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:600 doc/tin.5:2264 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:603 doc/tin.5:2267 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:606 doc/tin.5:2270 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:609 doc/tin.5:2283 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:612 doc/tin.5:2293 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:615 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:615 doc/tin.5:2322 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:618 doc/tin.5:2389 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:621 doc/tin.5:2394 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:624 doc/tin.5:2438 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:627 doc/tin.5:2414 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:630 doc/tin.5:2433 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:633 doc/tin.5:2467 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:636 doc/tin.5:2492 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:639 doc/tin.5:2557 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:642 doc/tin.5:2615 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:645 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:653 -msgid "" -"A piece of text that will be added at the start of a message body. If this " -"string starts with a / or ~ then it is assumed to be the name of a file " -"containing the text to insert. If the string starts with a ! then what " -"follows is assumed to be the path to a program to be executed to generate " -"the content. %G is expanded to the current news.group.name and %P is " -"expanded to the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:653 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:656 -msgid "Insert ''X-Comment-To:'' header, this is only useful in FIDO groups." -msgstr "" - -#. type: TP -#: doc/tin.5:656 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:665 -msgid "" -"A string including header-name and the contents of the header that will be " -"automatically added when posting. If the string starts with a / or ~ then it " -"is assumed to be the name of a file containing the header and its content to " -"be inserted. If the string starts with a ! then what follows is assumed to " -"be the path to a program to be executed to generate the header and its " -"content. %G is expanded to the current news.group.name and %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:665 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:671 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be used." -msgstr "" - -#. type: TP -#: doc/tin.5:671 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:674 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:674 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:677 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:677 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:680 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:680 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:686 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be used." -msgstr "" - -#. type: TP -#: doc/tin.5:686 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:689 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:689 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:692 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:692 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:695 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:695 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:700 -msgid "" -"Path and options for B<\\%ispell>(1)-like spell-checker, e.g., \"aspell --" -"mode=email --dont-backup check\"" -msgstr "" - -#. type: TP -#: doc/tin.5:700 doc/tin.5:1902 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: TP -#: doc/tin.5:703 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:714 -msgid "" -"Assume (broken) articles without MIME charset declaration have this charset " -"\\(em default is US-ASCII. This attribute works only on systems with working " -"B<\\%iconv>(3) or B<\\%ucnv_*>(), others might have to compile B<\\" -"%tin>(1) with --disable-mime-strict-charset." -msgstr "" - -#. type: TP -#: doc/tin.5:714 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:724 -msgid "" -"Guess charset for (broken) articles without MIME charset declaration. This " -"attribute works only on systems with working B<\\%iconv>(3) or B<\\" -"%ucnv_*>() and B<\\%ucsdet_getName()> from libicui18n. It has no effect if " -"undeclared_charset is also set." -msgstr "" - -#. type: Plain text -#: doc/tin.5:734 -#, no-wrap -msgid "" -"# include extra headers\n" -"# assume ISO-8859-1 as charset if no charset is declared\n" -"# in all but fido7.* groups\n" -"scope=*,!fido7.*\n" -"x_headers=~/.tin/headers\n" -"undeclared_charset=ISO-8859-1\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:738 -#, no-wrap -msgid "" -"# in *sources* set post process type to shar only\n" -"scope=*sources*\n" -"post_process_type=1\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:745 -#, no-wrap -msgid "" -"# in *binaries* turn on full post processing,\n" -"# remove tmp files and set Followup-To: poster\n" -"scope=*binaries*\n" -"post_process_type=2\n" -"delete_tmp_files=ON\n" -"followup_to=poster\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:751 -#, no-wrap -msgid "" -"# in fido.* newsgroups change quote_chars\n" -"# and add X-Comment-To: line\n" -"scope=fido.*\n" -"quote_chars=%IE_\n" -"x_comment_to=ON\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:755 -#, no-wrap -msgid "" -"# in fido7.* newsgroups guess charset\n" -"scope=fido7.*\n" -"undeclared_cs_guess=ON\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:761 -#, no-wrap -msgid "" -"# in *.test newsgroups, don't append signature\n" -"# and preset Subject\n" -"scope=*.test\n" -"sigfile=--none\n" -"x_headers=Subject: test - ignore - no reply\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:765 -#, no-wrap -msgid "" -"# assume ISO-2022-JP-2 as charset\n" -"scope=fj.*,japan.*\n" -"undeclared_charset=ISO-2022-JP-2\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:779 -msgid "" -"The filter file is used to assign scores to certain articles. Based on the " -"score an article can be filtered out (hidden) or marked hot. Empty lines or " -"lines beginning with a '#' are ignored. Multiple matching-rules in the same " -"scope are all applied individually and not only when they all hit at the " -"same time (logical OR not AND)." -msgstr "" - -#. type: TP -#: doc/tin.5:779 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:788 -msgid "" -"Every entry (rule) in the filter file might get a comment. Multiple lines " -"are allowed (but only for comments yet). Every line must start with the " -"\"comment=\" keyword. Comments must appear first in the rule. Comment lines " -"placed within a rule will be moved to the begin of the next rule. This might " -"be changed in the future. Don't use '#' to mark comments as those lines are " -"ignored and your comments will get lost on the next write of the file." -msgstr "" - -#. type: TP -#: doc/tin.5:788 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:792 -msgid "" -"A comma-separated list of newsgroup patterns in wildmat-style to which " -"groups the filter rule will be applied. This line is mandatory!" -msgstr "" - -#. type: TP -#: doc/tin.5:792 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:795 -msgid "0=case-sensitive, 1=case-insensitive" -msgstr "" - -#. type: TP -#: doc/tin.5:795 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:798 -msgid "" -"Score value of the rule; can also be one of the magic words \"kill\" or " -"\"hot\"." -msgstr "" - -#. type: TP -#: doc/tin.5:798 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:802 -msgid "" -"Match against ''Subject:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: Plain text -#: doc/tin.5:811 -msgid "" -"Match against ''From:''. B<\\%tin>(1) converts the contents of the " -"''From:'' header to an old style e-mail address, e.g., ''some@body.example " -"(John Doe)'' instead of ''John Doe Esome@body.exampleE'', before " -"trying to match the patterns in the filter rule. The matching type used " -"(wildmat or regex) depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:811 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:816 -msgid "" -"Match against ''Message-ID:'' and full ''References:''. The matching type " -"used (wildmat or regex) depends on the setting of the tinrc variable " -"B." -msgstr "" - -#. type: TP -#: doc/tin.5:816 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:821 -msgid "" -"Match against ''Message-ID:'' and last ''References:'' entry (direct " -"responses) only. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:821 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:825 -msgid "" -"Match against ''Message-ID:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:825 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:829 -msgid "" -"Match against ''References:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:829 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:832 -msgid "" -"Match against ''Lines:'', Enum matches less than, Enum matches more " -"than." -msgstr "" - -#. type: TP -#: doc/tin.5:832 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:839 -msgid "" -"Match against ''From:'' address parser return codes. Enum matches less " -"than, Enum matches more than the returned numeric value. " -"GNKSA_LOCAL_DOMAIN_LITERAL or GNKSA_INVALID_DOMAIN are only returned if " -"B is set to false. As the built in domain list " -"is outdated this should be considered carefully." -msgstr "" - -#. type: ta -#: doc/tin.5:841 -#, no-wrap -msgid "\\w'%406\t'u +\\w'GNKSA_ZERO_LENGTH_LOCAL_WORD'u" -msgstr "" - -#. type: Plain text -#: doc/tin.5:871 -#, no-wrap -msgid "" -" B<0>\tGNKSA_OK\n" -" B<1>\tGNKSA_INTERNAL_ERROR\n" -"B<100>\tGNKSA_LANGLE_MISSING\n" -"B<101>\tGNKSA_LPAREN_MISSING\n" -"B<102>\tGNKSA_RPAREN_MISSING\n" -"B<103>\tGNKSA_ATSIGN_MISSING\n" -"B<104>\tGNKSA_RANGLE_MISSING\n" -"B<200>\tGNKSA_SINGLE_DOMAIN\n" -"B<201>\tGNKSA_INVALID_DOMAIN\n" -"B<202>\tGNKSA_ILLEGAL_DOMAIN\n" -"B<203>\tGNKSA_UNKNOWN_DOMAIN\n" -"B<204>\tGNKSA_INVALID_FQDN_CHAR\n" -"B<205>\tGNKSA_ZERO_LENGTH_LABEL\n" -"B<206>\tGNKSA_ILLEGAL_LABEL_LENGTH\n" -"B<207>\tGNKSA_ILLEGAL_LABEL_HYPHEN\n" -"B<208>\tGNKSA_ILLEGAL_LABEL_BEGNUM\n" -"B<209>\tGNKSA_BAD_DOMAIN_LITERAL\n" -"B<210>\tGNKSA_LOCAL_DOMAIN_LITERAL\n" -"B<211>\tGNKSA_RBRACKET_MISSING\n" -"B<300>\tGNKSA_LOCALPART_MISSING\n" -"B<301>\tGNKSA_INVALID_LOCALPART\n" -"B<302>\tGNKSA_ZERO_LENGTH_LOCAL_WORD\n" -"B<400>\tGNKSA_ILLEGAL_UNQUOTED_CHAR\n" -"B<401>\tGNKSA_ILLEGAL_QUOTED_CHAR\n" -"B<402>\tGNKSA_ILLEGAL_ENCODED_CHAR\n" -"B<403>\tGNKSA_BAD_ENCODE_SYNTAX\n" -"B<404>\tGNKSA_ILLEGAL_PAREN_CHAR\n" -"B<405>\tGNKSA_INVALID_REALNAME\n" -"B<406>\tGNKSA_MISSING_REALNAME\n" -msgstr "" - -#. type: TP -#: doc/tin.5:873 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:880 -msgid "" -"Match against ''Xref:'' line. Before any matching is done the line is turned " -"into the same format ''Newsgroups:'' has that is it is turned into a comma " -"separated newsgroup list with all other information (i.e., the article " -"counter) removed. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" - -#. TODO: document option in detail -#. type: TP -#: doc/tin.5:880 -#, no-wrap -msgid "B" -msgstr "B" - -#. type: Plain text -#: doc/tin.5:886 -msgid "" -"Match against ''Path:'' line. This may not work on some servers. The " -"matching type used (wildmat or regex) depends on the setting of the tinrc " -"variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:886 doc/tin.5:2810 -#, no-wrap -msgid "B
" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2384 doc/tin.5:2136 -msgid "" -"If set to 0, this feature is deactivated, otherwise it means the number of " -"days. Default is 2." -msgstr "" - -#. type: TP -#: doc/tin.1:2384 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2388 -msgid "" -"If ON B does the rendering of bi-directional text. If OFF B leaves " -"the rendering of bi-directional text to the terminal. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2388 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2393 doc/tin.5:2148 -msgid "" -"The news I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file is " -"reread at regular intervals to show if any new news has arrived. Default is " -"1200. Setting this to 0 will disable this feature." -msgstr "" - -#. type: TP -#: doc/tin.1:2393 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2397 doc/tin.5:2152 -msgid "" -"Directory where articles/threads are saved. Default is " -"I<${TIN_HOMEDIR:-\"$HOME\"}/News>." -msgstr "" - -#. type: TP -#: doc/tin.1:2397 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2401 doc/tin.5:2156 -msgid "" -"If the score of an article is below or equal this value the article gets " -"marked as killed." -msgstr "" - -#. type: TP -#: doc/tin.1:2401 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2405 doc/tin.5:2160 -msgid "" -"If the score of an article is above or equal this value the article gets " -"marked as hot." -msgstr "" - -#. type: TP -#: doc/tin.1:2405 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2409 doc/tin.5:2164 -msgid "" -"Score of an article which should be killed, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2409 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2413 doc/tin.5:2168 -msgid "" -"Score of an article which should be marked hot, this must be E= " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2413 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2421 -msgid "" -"The number of lines that will be scrolled up/down in the article pager when " -"using cursor-up/down. The default is 1 (line-by-line). Set to 0 to get " -"traditional B page-by-page scrolling. Set to -1 to get page-by-page " -"scrolling where the top/bottom line is carried over onto the next page. " -"This setting supersedes show_last_line_prev_page=ON. Set to -2 to get " -"half-page scrolling. This setting supersedes B=OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2421 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2425 -msgid "" -"Format string B uses for Selection level representation. See the " -"section \"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%f\\ %n\\ %U\\ \\ " -"%G\\ \\ %d\"." -msgstr "" - -#. type: TP -#: doc/tin.1:2425 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2429 doc/tin.5:2211 -msgid "" -"Which information about the author should be shown. Default is 2, authors " -"full name." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2432 doc/tin.5:2214 -msgid "B, only the ''Subject:'' line will be displayed." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2435 doc/tin.5:2217 -msgid "" -"B
, ''Subject:'' line & the address part of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2438 doc/tin.5:2220 -msgid "" -"B, ''Subject:'' line & the authors full name part of the " -"\\&''From:'' line are displayed (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2441 doc/tin.5:2223 -msgid "" -"B
, ''Subject:'' line & all of the ''From:'' line are " -"displayed." -msgstr "" - -#. type: TP -#: doc/tin.1:2442 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2451 -msgid "" -"If ON show a short group description text after newsgroup name at the group " -"selection level. The ''B<-d>'' command-line flag will override the setting " -"and turn descriptions off. The text used is taken from the " -"I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups> file and if supported (requires " -"B to be built with mh-mail-handling support) from " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups> for mailgroups. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2451 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2454 doc/tin.5:2196 -msgid "Function used for sorting articles. Default is 0." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2459 doc/tin.5:2201 -msgid "Use B<\\%qsort>(3) for sorting." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2464 doc/tin.5:2206 -msgid "" -"Use B<\\%heapsort>(3) for sorting. This might be faster in large groups " -"with long threads (somewhat presorted data)." -msgstr "" - -#. type: TP -#: doc/tin.1:2465 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2470 -msgid "" -"Allows you to select whether B shows a help indication, a new mail " -"indication, both, or neither in the various level titles. Default is 3." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2473 doc/tin.5:2247 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2475 doc/tin.5:2249 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2478 doc/tin.5:2252 -msgid "" -"B, show only the mail sign, and only if new " -"mail has arrived." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2481 doc/tin.5:2255 -msgid "" -"B, show mail sign if new mail has " -"arrived otherwise show help sign." -msgstr "" - -#. type: TP -#: doc/tin.1:2482 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2486 doc/tin.5:2260 -msgid "" -"If ON show only new/unread articles otherwise show all articles. Default is " -"ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2486 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2490 doc/tin.5:2264 -msgid "" -"If ON show only subscribed groups that contain unread articles. Default is " -"OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2490 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2493 doc/tin.5:2267 -msgid "If OFF don't show signatures when displaying articles. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2493 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2497 doc/tin.5:2228 -msgid "" -"If ON show article score in the lower left corner when displaying articles. " -"Default is OFF. See also B and B." -msgstr "" - -#. type: TP -#: doc/tin.1:2497 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2500 doc/tin.5:2270 -msgid "If ON prepend the signature with sigdashes. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2500 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2510 -msgid "" -"The path that specifies the signature file to use when posting, following up " -"to or replying to an article. If the path is a directory then the signature " -"will be randomly generated from files that are in the specified " -"directory. If the path starts with a ! the program the path points to will " -"be executed to generate a signature. In order to pass the group name to the " -"program, %G can be specified. This will be replaced by the name of the " -"current newsgroup. --none will suppress any signature. Default is " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>." -msgstr "" - -#. type: TP -#: doc/tin.1:2510 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2513 doc/tin.5:2286 -msgid "If ON add signature to reposted articles. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2513 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2518 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2518 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2522 doc/tin.5:2297 -msgid "" -"This specifies how articles should be sorted. Sort by ascending Date (6) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2525 doc/tin.5:2300 -msgid "B, don't sort articles." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2527 doc/tin.5:2302 -msgid "B, sort articles by ''Subject:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2529 doc/tin.5:2304 -msgid "B, sort articles by ''Subject:'' field ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2531 doc/tin.5:2306 -msgid "B, sort articles by ''From:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2533 doc/tin.5:2308 -msgid "B, sort articles by ''From:'' field ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2535 doc/tin.5:2310 -msgid "B, sort articles by ''Date:'' field descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2538 doc/tin.5:2313 -msgid "B, sort articles by ''Date:'' field ascending (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2540 doc/tin.5:2315 -msgid "B, sort articles by filtering score descending." -msgstr "" - -#. type: IP -#: doc/tin.1:2540 doc/tin.5:2315 -#, no-wrap -msgid "8" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2542 doc/tin.5:2317 -msgid "B, sort articles by filtering score ascending." -msgstr "" - -#. type: IP -#: doc/tin.1:2542 doc/tin.5:2317 -#, no-wrap -msgid "9" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2544 doc/tin.5:2319 -msgid "B, sort articles by ''Lines:'' field descending." -msgstr "" - -#. type: IP -#: doc/tin.1:2544 doc/tin.5:2319 -#, no-wrap -msgid "10" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2546 doc/tin.5:2321 -msgid "B, sort articles by ''Lines:'' field ascending." -msgstr "" - -#. type: TP -#: doc/tin.1:2547 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2552 doc/tin.5:2326 -msgid "" -"This specifies how threads will be sorted. Sort by descending Score (1) is " -"the default. The following sort types are allowed:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2555 doc/tin.5:2329 -msgid "B, don't sort threads." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2558 doc/tin.5:2332 -msgid "B, sort threads by filtering score descending (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2560 doc/tin.5:2334 -msgid "B, sort threads by filtering score ascending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2562 doc/tin.5:2336 -msgid "" -"B, sort threads by date of last posting " -"descending." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2564 doc/tin.5:2338 -msgid "" -"B, sort threads by date of last posting " -"ascending." -msgstr "" - -#. type: TP -#: doc/tin.1:2565 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2570 doc/tin.5:2344 -msgid "" -"Set this option to a list of comma-separated strings to be warned if you are " -"replying to an article by mail where the e-mail address contains one of " -"these strings. The matching is case-insensitive. Example:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2572 doc/tin.5:2346 -msgid "I" -msgstr "" - -#. type: TP -#: doc/tin.1:2572 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2577 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2577 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2583 doc/tin.5:2357 -msgid "" -"Strips the blanks from the end of each line therefore speeding up the " -"display when reading on a slow terminal or via modem. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2583 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2592 doc/tin.5:2366 -msgid "" -"Bogus groups are groups that are present in your " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file that no longer exist on the news " -"server. There are 3 options. 0 means do nothing & always keep bogus groups. " -"1 means bogus groups will be permanently removed. 2 means that bogus groups " -"will appear on the Group Selection Menu, prefixed with a 'D'. This allows " -"you to unsubscribe from them as and when you wish. Default is 0 (Always " -"Keep)." -msgstr "" - -#. type: TP -#: doc/tin.1:2592 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2596 doc/tin.5:2370 -msgid "" -"If ON, then unsubscribed groups will be permanently removed from your " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc> file. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2596 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2602 -msgid "" -"A regular expression to find Subject prefixes like \"Re:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2602 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2608 doc/tin.5:2382 -msgid "" -"A regular expression to find Subject suffixes like \"(was:\" to remove. If " -"B is blank, then B<\\%tin>(1) uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2608 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2613 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2613 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2618 doc/tin.5:2620 -msgid "" -"If enabled a search for the next unread article will wrap around all " -"articles to find also previous unread articles. If disabled the search stops " -"at the end of the thread list. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2618 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2622 -msgid "" -"If ON, show \"a as Umlaut-a, etc. Default is OFF. This behavior can also be " -"toggled in the article viewer via B ('B<\">')." -msgstr "" - -#. type: TP -#: doc/tin.1:2622 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2630 -msgid "" -"Defines which threading method to use. It's possible to set the threading " -"type on a per group basis by setting the group attribute variable " -"B to 0 \\(en 4 in the file " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>. (See also \"GROUP " -"ATTRIBUTES\".) The default is Both Subject and References. The choices " -"are:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2633 -msgid "B, don't thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2635 -msgid "B, thread on ''Subject:'' only." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2637 -msgid "B, thread on ''References:'' only." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2640 -msgid "" -"B, thread on ''References:'' then " -"\\&''Subject:'' (default)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2642 -msgid "B, thread multipart articles on ''Subject:''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2645 -msgid "" -"B, thread base upon a partial character match on " -"\\&''Subject:''." -msgstr "" - -#. type: TP -#: doc/tin.1:2646 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2650 doc/tin.5:2442 -msgid "" -"If ON catchup group/thread when leaving with the left arrow key. Default is " -"ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2650 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2654 -msgid "" -"Format string B uses for Thread level representation. See the section " -"\"CUSTOMIZING THE SCREEN FORMAT\". Default is \"%n\\ %m\\ \\ [%L]\\ \\ %T\\ " -"\\ %F\"." -msgstr "" - -#. type: TP -#: doc/tin.1:2654 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2658 -msgid "" -"How closely the subjects must match for two threads to be considered part of " -"the same thread. This is a percentage and the default if 75%." -msgstr "" - -#. type: TP -#: doc/tin.1:2658 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2662 doc/tin.5:2446 -msgid "" -"How the total score of a thread is computed. Default is 0, the maximum score " -"in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2665 doc/tin.5:2449 -msgid "B, the maximum score in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2667 doc/tin.5:2451 -msgid "B, the sum of all scores in this thread." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2669 doc/tin.5:2453 -msgid "B, the average score in this thread." -msgstr "" - -#. type: TP -#: doc/tin.1:2670 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2675 -msgid "" -"The name of file containing all trusted CA certificates used for NNTPS " -"(B<\\%RFC8143>) connections. If left empty the system default will be used." -msgstr "" - -#. type: TP -#: doc/tin.1:2675 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2683 doc/tin.5:2467 -msgid "" -"If ON append //TRANSLIT to the first argument of B<\\%iconv_open>(3) to " -"enable transliteration. This means that when a character cannot be " -"represented in the target character set, it can be approximated through one " -"or several similarly looking characters. On systems where this extension " -"doesn't exist, this option is disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2683 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2687 -msgid "" -"Allows you to select how B treats blank lines in article bodies. " -"Default is 0. This option does not affect lines within verbatim blocks." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2690 doc/tin.5:2476 -msgid "B, do nothing." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2692 doc/tin.5:2478 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2694 doc/tin.5:2480 -msgid "B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2696 doc/tin.5:2482 -msgid "" -"B, skip leading and trailing blank " -"lines." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2699 doc/tin.5:2485 -msgid "" -"B, replace multiple blank lines between text " -"blocks with one blank line." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2701 doc/tin.5:2487 -msgid "B, 4 + 1" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2703 doc/tin.5:2489 -msgid "B, 4 + 2" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2705 doc/tin.5:2491 -msgid "B, 4 + 3" -msgstr "" - -#. type: TP -#: doc/tin.1:2706 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2714 -msgid "" -"If ON remove soft hyphens in non verbatim blocks of articles in UTF-8 when " -"they are displayed in a UTF-8 locale. The character SOFT HYPHEN (U+00AD) is " -"an invisible format character that merely indicates a preferred intraword " -"line break position. However, some terminal emulators display a space or a " -"hyphen, for example, in the place of the soft hyphen. This setting can be " -"used to improve the display of those articles. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2714 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2719 -msgid "" -"A regular expression that will be applied when reading articles. All " -"matching words are shown in B or B. If " -"B is blank, then B uses a built-in default." -msgstr "" - -#. type: TP -#: doc/tin.1:2719 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2722 -msgid "If ON remove I<~/.article> after posting. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2722 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2727 doc/tin.5:2512 -msgid "" -"The program that will be run when launching URLs in the article viewer using " -"B ('B'). The actual URL will be appended. Default is " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:2727 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2730 doc/tin.5:2515 -msgid "Enable highlighting URLs in message body. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2730 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2733 -msgid "If enabled B uses ANSI-colors. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2733 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.1:2736 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2742 doc/tin.5:2529 -msgid "" -"Allows the mouse button support in an B<\\%xterm>(1x) to be " -"enabled/disabled. Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2742 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2752 -msgid "" -"If enabled B uses B<\\%slrnface>(1) to interpret the ''X-Face:'' " -"header. For this option to have any effect, B must be running in an " -"B<\\%xterm>(1x) and B<\\%slrnface>(1) must be in your $B. Default is " -"OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2752 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2756 -msgid "" -"If ON use UTF-8 characters for indicator ('\\(-E'), thread/attachment " -"tree and ellipsis ('...'). Default is OFF." -msgstr "" - -#. type: TP -#: doc/tin.1:2756 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2760 -msgid "" -"A regular expression that B will use to find the begin of a verbatim " -"block." -msgstr "" - -#. type: TP -#: doc/tin.1:2760 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2764 -msgid "" -"A regular expression that B will use to find the end of a verbatim " -"block." -msgstr "" - -#. type: TP -#: doc/tin.1:2764 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2767 doc/tin.5:2560 -msgid "If ON verbatim blocks will be detected. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2767 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2789 -msgid "" -"Allows you to select how B matches strings. The default is 0 and uses " -"the B<\\%wildmat>(3) notation, which is how this has traditionally been " -"handled. Setting this to 1 allows you to use B<\\%perl>(1) compatible " -"regular expressions B<\\%pcre>(3) or B<\\%pcre2>(3) (see also " -"B<\\%perlre>(1) and B<\\%pcrepattern>(3) or B<\\%pcre2pattern>(3)). You " -"will probably want to update your filter file if you use this regularly. " -"NB: Newsgroup names will always be matched using the B<\\%wildmat>(3) " -"notation." -msgstr "" - -#. type: TP -#: doc/tin.1:2789 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2793 doc/tin.5:2588 -msgid "" -"Should the leading and ending stars, slashes, strokes and dashes also be " -"displayed, even when they are highlighting marks?" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2796 doc/tin.5:2591 -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2798 doc/tin.5:2593 -msgid "yes, B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2800 doc/tin.5:2595 -msgid "print a B instead" -msgstr "" - -#. type: TP -#: doc/tin.1:2801 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2809 doc/tin.5:2604 -msgid "" -"Enable word highlighting. See B for the options " -"available. If B is enabled the colors specified in " -"B, B, B and B are " -"used for word highlighting else the character attributes specified in " -"B, B, B and B " -"are used. Default is ON." -msgstr "" - -#. type: TP -#: doc/tin.1:2809 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2820 doc/tin.5:2615 -msgid "" -"Sets the column at which a displayed article body should be wrapped. If " -"this value is equal to 0, it defaults to the current screen width. If this " -"value is greater than your current screen width and B is " -"unset the part off-screen is not displayed. Thus setting this option to a " -"large value can be used to disable wrapping. If this value is negative the " -"wrap margin is the current screen width plus the given value (as long as the " -"result is still positive, otherwise it will fall back to the current screen " -"width). Default is 0, wrapping at the current screen width." -msgstr "" - -#. type: TP -#: doc/tin.1:2820 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2827 doc/tin.5:2625 -msgid "" -"Format is the same as for B, this is used when answering " -"to a crossposting to several groups with no ''Followup-To:'' set." -msgstr "" - -#. type: SS -#: doc/tin.1:2827 -#, no-wrap -msgid "ATTRIBUTES MENU AND GROUP ATTRIBUTES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2834 -msgid "" -"B allows certain attributes to be set on a per group basis. If it " -"exists, the global attributes file, I<${TIN_LIBDIR:-NEWSLIBDIR}/attributes> " -"is read. After that, the user's own attributes file " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes> is read. The global attributes " -"file is useful for distributing system-wide defaults to new users who have " -"no private attributes file yet." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2842 -msgid "" -"Note that the IgrouplistE> line has to be specified before " -"the attributes are specified for that list. All attributes are set to a " -"reasonable default so you only have to specify the attribute that you want " -"to change (e.g., B). All toggle attributes are set by specifying " -"ON/OFF. Otherwise, these function exactly the same as their global " -"equivalents. For more details see B<\\%tin>(5)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2849 -msgid "" -"Attributes can also be changed from the attributes menu which can be " -"accessed by B ('BTABE>') from the options menu " -"or B ('B<^J>' or 'BCRE>') from the scopes menu. The " -"attributes menu looks and behaves very similar to the options menu. The " -"title shows the current scope. Attributes set in the current scope are " -"marked with '+' to the left of the attributes number." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2856 -msgid "" -"Besides the keys for moving around and changing values known from the " -"options menu the attributes menu provides the following command: " -"B ('B') which resets an attribute to a default value." -msgstr "" - -#. type: SS -#: doc/tin.1:2856 -#, no-wrap -msgid "SCOPES MENU" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2861 -msgid "" -"The scopes menu (accessible from the options menu with B " -"('B')) shows all scopes read from the global and local attributes file. " -"Scopes from the global attributes file are marked with '!\\&' to the left of " -"the scope number. Delete/rename/move are not possible with those scopes." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2873 -msgid "" -"In addition to the common moving keys the following commands are available: " -"B ('B<^J>' or 'BCRE>') enter the attributes menu for " -"the current scope, B ('B') edit the local " -"attributes file, B ('B') add a new scope, B " -"('B') delete the current scope, B ('B') move the current " -"scope to a new position, B ('B') rename the current " -"scope. B ('B') toggles the help mini menu at the " -"bottom of the screen and posting etiquette after composing an article " -"(B)." -msgstr "" - -#. type: SS -#: doc/tin.1:2873 -#, no-wrap -msgid "FILTERING ARTICLES" -msgstr "" - -#. FIXME - add scoring description -#. type: Plain text -#: doc/tin.1:2880 -msgid "" -"When there is a subject or an author which you are either very interested " -"in, or find completely uninteresting, you can easily instruct B to " -"I or I articles that match I that you " -"specify. This can be anything from the name of the author to the number of " -"lines in an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2887 -msgid "" -"When B starts up the user's kill-file " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter> or the file specified via ''B<-F>'' " -"is read (see also B<\\%tin>(5) ). Each time a newsgroup is entered the " -"rules are applied and articles killed or selected when they meet certain " -"criteria." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2892 -msgid "" -"The degree to which rules are applied depend on the B tinrc " -"setting. By default killed articles will only be marked read. Adjust " -"B for more aggressive processing. Articles that match an " -"auto-selection rule are marked with a ''*''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2897 -msgid "" -"Filtering rules can be manually entered into " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter> (but don't do this whilst running " -"B else you will lose your changes) or by using an on-screen menu within " -"B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2902 -msgid "" -"The filtering capabilities of B have been significantly enhanced over " -"previous versions to include scoring and better pattern matching. It is " -"recommended that you read the file I in the B documentation " -"directory. This file can also be read online at" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2904 -msgid "Ehttp://bzr.tin.org/doc/filteringE." -msgstr "" - -#. FIXME - Next paragraph is out of date -#. type: Plain text -#: doc/tin.1:2917 -msgid "" -"The on-screen filtering menu is accessed by pressing B " -"('B<^K>') or B ('B<^A>') at the Group and Article " -"levels. It allows the user to kill or select an article that matches the " -"current ''Subject:'' line, ''From:'' line or a string entered by the " -"user. The user entered string can be applied to the \\&''Subject:'' or " -"''From:'' line of an article. The filter can be limited to the current " -"newsgroup or it can apply to all newsgroups. Once entered the user can abort " -"the command and not save the new filter, edit the full filter file or save " -"filter." -msgstr "" - -#. type: SS -#: doc/tin.1:2917 -#, no-wrap -msgid "POSTING ARTICLES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2920 -msgid "" -"B allows posting of articles, follow-up to already posted articles and " -"replying direct through mail to the author of an article." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2930 -msgid "" -"Use the B ('B') command to post an article to a newsgroup. After " -"entering the post subject the default editor (i.e., B<\\%vi>(1)) or the " -"editor specified by the $B or $B environment variable will " -"be started and the article can be entered. To crosspost articles simply add " -"a comma and the name of the newsgroup(s) to the end of the ''Newsgroups:'' " -"line at the beginning of the article. After saving and exiting the editor " -"you are asked if you wish to a)bort posting the article, e)dit the article " -"again or p)ost the article to the specified newsgroup(s)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2935 -msgid "" -"Use the B ('B') command to display a history of the " -"articles you have posted. The date the article was posted, which newsgroups " -"the article was posted to and the articles subject line are displayed. See " -"the section \"POSTING HISTORY LISTING\" for more information." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2943 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^W>') command to post a follow-up article to " -"an already posted article. The B command will copy the " -"text of the original article into the editor. The " -"B command will copy the text and all headers of " -"the original article into the editor. The editing procedure is the same as " -"when posting an article with the B ('B') command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:2957 -msgid "" -"Use the B ('B'), B ('B') or " -"B ('B<^E>') command to reply direct through mail to " -"the author of an already posted article. The B command will " -"copy the text of the original article into the editor. The " -"B command will copy the text and all headers of the " -"original article into the editor. The editing procedure is the same as when " -"posting an article with the B ('B') command. After saving and " -"exiting the editor you are asked if you wish to abort sending the article " -"via B ('B'), edit the article again via B ('B') " -"or send the article to the author via B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:2957 -#, no-wrap -msgid "CUSTOMIZING THE ARTICLE QUOTE STRING" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2966 -msgid "" -"When posting a followup to an article or replying direct to the author of an " -"article via email the text of the article can be quoted. The beginning of " -"the quoted text can contain information about the quoted article (e.g., Name " -"and the Message-ID of the article). If the article has multiple addresses " -"only the first is evaluated. To allow for different situations certain " -"information from the article can be used in the quoted string. The following " -"variables are expanded if found in the tinrc variables B, " -"B or B:" -msgstr "" - -#. type: ta -#: doc/tin.1:2968 -#, no-wrap -msgid "\\w'%A 'u +\\w'Address'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2977 -#, no-wrap -msgid "" -"B<%A>\tAddress (Email)\n" -"B<%D>\tDate (uses B)\n" -"B<%F>\tFull address (%N E%AE)\n" -"B<%G>\tGroupname\n" -"B<%M>\tMessage-ID\n" -"B<%N>\tFullname of author\n" -"B<%C>\tFirstname of author\n" -"B<%I>\tInitials of author\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2980 -msgid "e.g.," -msgstr "" - -#. type: Plain text -#: doc/tin.1:2985 -#, no-wrap -msgid "" -"\\f(CRmail_quote_format=On %D in %G you wrote:\n" -"news_quote_format=In %M, %F wrote:\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2989 -msgid "would expand to:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:2994 -#, no-wrap -msgid "" -"\\f(CROn 21 Sep 1993 09:45:51 -0400 in alt.sources you wrote:\n" -"In EabcINN123@example.orgE, Joe Bar Ejoe@example.orgE " -"wrote:\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3004 -msgid "" -"The quoted text section of an article is marked by a preceding quote string " -"at the beginning of each quoted line. The default quote string is set to " -"\\&'E_'. The default can be changed by setting the tinrc variable " -"B to ones own preference. (Note that '_' underline is used to " -"represent a space)." -msgstr "" - -#. type: SS -#: doc/tin.1:3004 -#, no-wrap -msgid "MAILING PIPING PRINTING REPOSTING AND SAVING ARTICLES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3011 -msgid "" -"The command interface to B, B, B or " -"B ('B'), B ('B<|>'), B ('B'), B " -"or B ('B') and B, B or B " -"('B' and B, B or B 'B') " -"articles is the same for ease of use." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3016 -msgid "" -"Auto-saving with B<*AutoSave> ('B') is a special case and operates only " -"on marked articles. They will processed without any further prompting " -"according to the default save parameters defined in tinrc or by any " -"attributes set for the current group." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3020 -msgid "" -"Otherwise, the initial prompt will ask you to select which article, thread, " -"hot (auto-selected), regular expression pattern, tagged articles you wish to " -"mail, pipe etc." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3024 -msgid "" -"Tagged articles must have already been tagged with a B<*Tag> ('B') " -"command. All tagged articles can be untagged by a B<*Untag> ('B') untag " -"command." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3030 -msgid "" -"If a regular expression pattern is selected you are asked to enter a pattern " -"(e.g., to match all articles subject lines containing 'net News' you enter " -"\"net News\"). Any articles that match the entered expression will be " -"mailed, piped etc. See also the B tinrc variable for advanced " -"pattern matching options." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3035 -msgid "" -"Various expansion characters are recognized when entering the directory and " -"file to save to. Environment variables (prefixed with '$') and user home " -"directories (prefixed by '~' or '~username') can be specified. Environment " -"variables can themselves contain other special characters." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3040 -msgid "" -"To save articles to a mailbox enter '=Emailbox nameE' when asked for " -"the save filename. If you enter just '=' then articles will be saved to a " -"mailbox with the name of the current newsgroup (eg, alt.sources). See " -"B." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3045 -msgid "" -"To save in savedir/Enews.group.nameE/EfilenameE format enter " -"'+EfilenameE'. See B. Like '+' %G is expanded to the " -"current news.group.name but without B prefixed. %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3050 -msgid "" -"If saving multiple files at once the filename (if not referring to a " -"mailbox) will be extended by \".num\" where \"num\" is at least 3 digit " -"number counting up from 1. Environment variables are allowed within a " -"filename (e.g., I<$SOURCES/dir/filename>)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3056 -msgid "" -"When saving articles you can specify whether the saved files should be post " -"processed. A default process type can be set via B." -msgstr "" - -#. type: SS -#: doc/tin.1:3056 -#, no-wrap -msgid "AUTOMATIC MAILING AND SAVING NEW NEWS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3068 -msgid "" -"B allows new/unread news articles to be mailed (''B<-M>'' and " -"\\&''B<-N>'' option) or saved (''B<-S>'' option) in batch mode for later " -"reading. Useful when going on holiday and you don't want to return and find " -"that expire has removed a whole load of unread articles. Best to run via " -"B<\\%cron>(8) everyday while away, after which you will be mailed a report " -"of which articles were mailed/saved from which newsgroups and the total " -"number of articles mailed/saved. Articles are saved in a private news " -"structure under your B directory (default is " -"I<${TIN_HOMEDIR:-\"$HOME\"}/News>). Be careful of using this option if you " -"read a lot of groups because you could overflow your file system." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3072 -msgid "" -"When using ''B<-S>'' together with a given directory to save to (''B<-s>'' " -"option), the same directory must be specified when reading the articles by " -"''B<-R>''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3079 -msgid "" -"If you only want to save some of your groups use the B tinrc " -"variable. Set to ON or OFF in tinrc to enable/disable saving of all groups " -"and then use the B attribute to fine tune which groups you want " -"to have saved. For example, if you want to save most of your groups, then " -"set B to ON in tinrc and selectively turn off the ones you don't " -"want using attributes." -msgstr "" - -#. type: TP -#: doc/tin.1:3079 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3083 -msgid "" -"(mail any unread articles in newsgroups specified in file newsrc.mail to the " -"local user iain and mark them as read)" -msgstr "" - -#. type: TP -#: doc/tin.1:3083 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3087 -msgid "" -"(save any unread articles in newsgroups specified in file newsrc.save and " -"mark them as read)" -msgstr "" - -#. type: TP -#: doc/tin.1:3087 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3092 -msgid "(read any articles saved by B)" -msgstr "" - -#. type: SS -#: doc/tin.1:3092 -#, no-wrap -msgid "RANGES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3104 -msgid "" -"A range is simply a group of items marked using the B (B<'#'>) " -"key. Certain B commands will operate on a range if one exists rather " -"than just the current item. A range is an expression of the form " -"EminE\\(enEmaxE, e.g., 10\\(en15 will highlight items 10 " -"through 15 on the current screen. Other than absolute numeric positions, " -"'.\\&' can be used in place of the current cursor position and '$' can be " -"used to mean the highest number available. Entering '0' at the prompt undoes " -"the previously entered range selection. Currently the only commands that " -"understand ranges are B ('B'), B " -"('B') and B ('B')." -msgstr "" - -#. type: SS -#: doc/tin.1:3104 -#, no-wrap -msgid "NEWSGROUP LISTS & WILDCARDS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3116 -msgid "" -"Several places in B allow you to specify a list of newsgroups. These " -"include command-line groups, (un)subscribe groups, the AUTO[UN]SUBSCRIBE " -"mechanism. The scope= attributes file tag and the filter file group= tag " -"also use the same syntax. B interprets this variable similarly to " -"B<\\%rn>(1). It contains a list of patterns, separated by commas and " -"possibly prefixed with exclamation points. An exclamation point negates the " -"meaning of a match on this pattern, and can be used to cancel certain " -"matches. See B<\\%wildmat>(3) for details about the understood " -"patterns. Some examples:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3118 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3120 -msgid "Matches alt.config and everything in the 'news' hierarchy except news.test" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3125 -msgid "" -"See the explanation for the $B and $B " -"variables for further examples." -msgstr "" - -#. type: SS -#: doc/tin.1:3125 -#, no-wrap -msgid "SIGNATURES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3134 -msgid "" -"B will recognize a signature in either " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.signature> or " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>. If " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.signature> exists, then the signature will be " -"pulled into the editor for mail commands only. A signature in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.signature> will not be pulled into the editor " -"for posting commands since B<\\%inews>(1) will append the signature itself." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3137 -msgid "" -"A signature in I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig> will be pulled into the " -"editor for both posting and mailing commands." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3139 -msgid "The following is an example of a I<.Sig> file:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3144 -#, no-wrap -msgid "" -"\\f(CRNAMES Joe Bar Ejoe@example.orgE\n" -"SNAIL Musterweg 12, 99999 Notreal, Germany\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3159 -msgid "" -"B also has the capability to generate random signatures on a per " -"newsgroup basis if so desired. The way to accomplish this is to specify the " -"default signature or the group attribute sigfile as a directory. If for " -"example the sigfile path is I and I<.sigs> is a directory " -"then B will select a random signature from any file that is in the " -"directory I<.sigs> (note: one signature per numbered file). A random " -"signature can also consist of a fixed part signature that can contain your " -"name, address etc. followed by the random sig. The fixed part of the random " -"sig is read from the file I<$HOME/.sigfixed>." -msgstr "" - -#. type: SS -#: doc/tin.1:3159 -#, no-wrap -msgid "CUSTOMIZING THE SCREEN FORMAT" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3165 -msgid "" -"The look of the Selection, Group and Thread level can be customized via " -"format strings. These format strings define the content and the position of " -"each element on the screen. Variables are used within the format strings as " -"placeholders. If the article has multiple addresses only the first is " -"evaluated. The following variables are available:" -msgstr "" - -#. type: ta -#: doc/tin.1:3168 -#, no-wrap -msgid "\\w'%G 'u +\\w'current group/thread/article number'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3185 -#, no-wrap -msgid "" -"B<%D>\tdate\n" -"B<%F>\tfrom, name and/or address\n" -"B<%G>\tnewsgroup name\n" -"B<%I>\tinitials\n" -"B<%L>\tline count\n" -"B<%M>\tmessage-id\n" -"B<%R>\tnumber of responses in thread\n" -"B<%S>\tscore\n" -"B<%T>\tthread tree\n" -"B<%U>\tunread count\n" -"B<%d>\tnewsgroup description\n" -"B<%f>\tnewsgroup flag\n" -"B<%m>\tarticle marks\n" -"B<%n>\tcurrent group/thread/article number\n" -"B<%s>\tsubject\n" -"B<%%>\t%\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3190 -msgid "" -"Not all variables can be used in each level. The following table provides an " -"overview:" -msgstr "" - -#. type: ta -#: doc/tin.1:3193 -#, no-wrap -msgid "" -"\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC " -"+\\w'B'uC" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3211 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%D>\t\tX\tX\n" -"B<%F>\t\tX\tX\n" -"B<%G>\tX\n" -"B<%I>\t\tX\tX\n" -"B<%L>\t\tX\tX\n" -"B<%M>\t\tX\tX\n" -"B<%R>\t\tX\n" -"B<%S>\t\tX\tX\n" -"B<%T>\t\t\tX\n" -"B<%U>\tX\n" -"B<%d>\tX\n" -"B<%f>\tX\n" -"B<%m>\t\tX\tX\n" -"B<%n>\tX\tX\tX\n" -"B<%s>\t\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3215 doc/tin.1:3379 -msgid "Defaults for the format strings:" -msgstr "" - -#. type: ta -#: doc/tin.1:3218 -#, no-wrap -msgid "\\w'select_format 'u +\\w'\"B<%n %m [%L] %T %F>\"'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3222 -#, no-wrap -msgid "" -"B:\t\"B<%f %n %U %G %d>\"\n" -"B:\t\"B<%n %m %R %L %s %F>\"\n" -"B:\t\"B<%n %m [%L] %T %F>\"\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3228 -msgid "" -"B controls whether the newsgroup description is shown or " -"not. The description can also be toggled with B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3233 -msgid "" -"The information displayed with 'B<%F>' depends on the value of " -"B. B resp. B " -"('B') switches through all available options." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3237 -msgid "" -"For date representation 'B<%D>' uses B. It is possible to " -"specify a different date format in round brackets (e.g., 'B<%(%d %b %y " -"%H:%M)D>'). See B for more details." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3241 -msgid "" -"The length of each item (except 'B<%%>') can be defined with a positive " -"number after the 'B<%>'. The following example displays the score in the " -"thread level 10 characters wide: 'B<%10S>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3247 -msgid "" -"If the newsgroup name is displayed together with the newsgroup description, " -"the width of the newsgroup name can be controlled via an optional comma " -"separated second value (e.g., 'B<%60,20G>'). It is valid to omit the first " -"value (e.g., ('B<%,20G>')). If no second value is given, B uses a " -"default value of 32." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3254 -msgid "" -"Some variables do have a default width which may lead to truncation. " -"Truncation for variables which contain only numbers happens by dividing the " -"value with a sufficient power of ten and adding a SI suffix to the result, " -"that is the variable holds a value of 54321 and the width for the variable " -"is 4 the result will be \"54 k\". If that's undesired you have to specify a " -"larger width manually, e.g., 'B<%6n>'. Here is an overview of the defaults:" -msgstr "" - -#. type: ta -#: doc/tin.1:3257 -#, no-wrap -msgid "\\w'Variable 'u +\\w'width'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3266 -#, no-wrap -msgid "" -"Variable\twidth\n" -"B<%I>\t 3\n" -"B<%L>\t 4\n" -"B<%M>\t10\n" -"B<%R>\t 3\n" -"B<%S>\t 6\n" -"B<%U>\t 5\n" -"B<%n>\t 4\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3277 -msgid "" -"If no length is given for 'B<%D>', the length is determined by the format " -"string for the date and the date of the current day. If the date format " -"string contains weekdays or months names it may happen that the date is " -"longer than determined in the first pass. In this case, the date is " -"truncated before display. This occurs, for example, if the current month is " -"May and the article to which the date is displayed was posted in " -"December. In such cases it might useful to determine the maximum length " -"manually and specify the length in the format string." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3281 -msgid "" -"In case the format string contains 'B<%G>' and 'B<%d>' and no length are " -"given, B determines the longest newsgroup name and uses this length for " -"'B<%G>'. The remaining space will used for 'B<%d>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3285 -msgid "" -"When the format string contains the specifier 'B<%F>' and 'B<%s>' " -"resp. 'B<%T>' and no length are given, 'B<%F>' will use one third and " -"'B<%s>' resp. 'B<%T>' will use two third of the available space." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3295 -msgid "" -"In addition, a minimum or a maximum screen width can be defined for each " -"item (except 'B<%%>'). In this case, the item will only be displayed when " -"the screen is wider resp. smaller than specified. This comes in handy to not " -"overload a small screen but have maximum information on a large screen. The " -"minimum screen width has to be specified by a positive number preceded by an " -"'B>', the maximum screenwidth has to be specified by a positive number " -"preceded by an 'B>'. In the following example B will display the " -"score only if the screen is wider than 100 characters: 'B<%E100S>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3309 -msgid "" -"If both the length and the minimum or maximum screen width should be " -"specified for an item, the length must be the first parameter and the " -"minimum or maximum screen width must be the second one. The following " -"example displays the score with a length of 10 characters only if the screen " -"is wider than 100 characters: 'B<%10E100S>'. A second length can be " -"specified for 'B<%F>' and 'B<%s>' resp. 'B<%T>', separated by a colon, which " -"is used if the minimum or maximum screen width is not reached. If no length " -"is specified after the colon, the item is displayed even if the minimum " -"screen width is not reached and the length is calculated as if no minimum " -"(or maximum) screen width had been specified. In the following example " -"B will display the subject with a length of 60 characters if the screen " -"is wider than 100 characters, otherwise a length of 40 characters is used: " -"'B<%60E100:40s>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3313 -msgid "" -"The look of the Attachment level and the mime and uue header at Page level " -"can be customized too via format strings. The following variables are " -"available:" -msgstr "" - -#. type: ta -#: doc/tin.1:3316 -#, no-wrap -msgid "\\w'%G 'u +\\w'Complete/incomplete UUE part indicator'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3335 -#, no-wrap -msgid "" -"B<%C>\tCharset\n" -"B<%c>\tLike %C but with description\n" -"B<%D>\tLine count\n" -"B<%d>\tLike %D but with description\n" -"B<%E>\tContent encoding\n" -"B<%e>\tLike %E but with description\n" -"B<%I>\tComplete/incomplete UUE part indicator\n" -"B<%L>\tLanguage\n" -"B<%l>\tLike %L but with description\n" -"B<%N>\tName\n" -"B<%n>\tLike %N but with description\n" -"B<%S>\tContent subtype\n" -"B<%s>\tLike %S but with description\n" -"B<%T>\tContent type\n" -"B<%t>\tLike %T but with description\n" -"B<%Z>\tSize in bytes\n" -"B<%z>\tLike %Z but with description\n" -"B<%%>\t%\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3340 -msgid "" -"Not all items can be used in each variable. The following table provides an " -"overview:" -msgstr "" - -#. type: ta -#: doc/tin.1:3343 -#, no-wrap -msgid "" -"\\w'%G 'uC +\\w'B 'uC +\\w'B 'uC " -"+\\w'B'uC" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3363 -#, no-wrap -msgid "" -"\tB\tB\tB\n" -"B<%C>\tX\tX\n" -"B<%c>\tX\tX\n" -"B<%D>\tX\tX\tX\n" -"B<%d>\tX\tX\tX\n" -"B<%E>\tX\tX\tX\n" -"B<%e>\tX\tX\tX\n" -"B<%I>\t\t\tX\n" -"B<%L>\tX\tX\n" -"B<%l>\tX\tX\n" -"B<%N>\t\tX\tX\n" -"B<%n>\t\tX\tX\n" -"B<%S>\tX\tX\tX\n" -"B<%s>\tX\tX\tX\n" -"B<%T>\tX\tX\tX\n" -"B<%t>\tX\tX\tX\n" -"B<%Z>\tX\tX\tX\n" -"B<%z>\tX\tX\tX\n" -"B<%%>\tX\tX\tX\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3377 -msgid "" -"By default, the string is not truncated. If it exceeds the screen width, it " -"is wrapped. If the % sign is followed by an exclamation mark ('!\\&') for " -"uppercase letters, the element is omitted if there is not enough space. If " -"the % sign is followed by an asterisk ('*') for a lowercase letter, the " -"description is omitted if there is not enough space. If the % sign is " -"followed by an exclamation mark ('!\\&') for a lowercase letter, the " -"description is omitted first and then the content. The shortening is always " -"from right to left, first the description is omitted and when no more " -"description is displayed, the content is omitted. If %T and %S follow each " -"other directly a '/' will be inserted in between. %Z will always have one " -"decimal point and may have a one letter bi-suffix." -msgstr "" - -#. type: ta -#: doc/tin.1:3382 -#, no-wrap -msgid "\\w'attachment_format'u +\\w'\"B<%T%S%E%C%d>\"'u" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3386 -#, no-wrap -msgid "" -"B:\t\"B<%T%S%E%C%d>\"\n" -"B:\t\"B<[-- %T%S%*n%z%*l%!c%!d%*e --]>\"\n" -"B:\t\t\"B<[-- %T%S%*n%I%!d%*e --]>\"\n" -msgstr "" - -#. type: SS -#: doc/tin.1:3389 -#, no-wrap -msgid "TIPS AND TRICKS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3393 -msgid "" -"B can be pretty much be navigated by using the four cursor keys. The " -"left arrow key goes up a level, the right arrow key goes down a level, the " -"up arrow key goes up a line and the down arrow key goes down a line." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3395 -msgid "" -"The following newsgroups provide useful information concerning news " -"software:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3398 -msgid "" -"\\(emnews.software.readers (info. about news user agents tin, rn, nn, slrn " -"etc.)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3400 -msgid "\\(emnews.software.nntp (info. about NNTP)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3402 -msgid "" -"\\(emnews.answers (Frequently Asked Questions (FAQ) about many different " -"themes)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3406 -msgid "" -"Many prompts within B offer a default choice that the cursor is " -"positioned on. By pressing 'BCRE>' the default value is taken. " -"Most prompts can be aborted by pressing 'BESCE>'." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3413 -msgid "" -"When B is run in an B<\\%xterm>(1x) it will resize itself each time " -"the B<\\%xterm>(1x) is resized." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3417 -msgid "" -"B will reread the " -"I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}> file at set " -"intervals (B) to show any newly arrived news." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3422 -msgid "" -"If you find large number of new newsgroups cluttering up your screen, " -"pressing B ('B') will make them go away." -msgstr "" - -#. type: SS -#: doc/tin.1:3422 -#, no-wrap -msgid "XTERM BUTTONS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3428 -msgid "" -"If the environment variable B<$TERM> is set to B<\\%xterm>(1x), then button " -"pressing can be used to select groups and articles. In this discussion, the " -"buttons are assumed to be assigned conventionally (i.e., Button1 is the left " -"button)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3430 -msgid "In general (i.e., for the group, thread and article menus)," -msgstr "" - -#. type: TP -#: doc/tin.1:3430 -#, no-wrap -msgid "Button1 (left)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3433 -msgid "enters next (lower) level if you click on an article, otherwise pages down." -msgstr "" - -#. type: TP -#: doc/tin.1:3433 -#, no-wrap -msgid "Button2 (center)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3437 -msgid "" -"returns to the previous (upper) level if you click on an article, otherwise " -"pages up." -msgstr "" - -#. type: TP -#: doc/tin.1:3437 -#, no-wrap -msgid "Button3 (right)" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3441 -msgid "" -"positions on the article line under mouse cursor, or pages down if you've " -"clicked outside the list of articles." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3443 -msgid "In the group selection menu, if the mouse is pointing at a group then:" -msgstr "" - -#. type: TP -#: doc/tin.1:3443 doc/tin.1:3455 doc/tin.1:3469 -#, no-wrap -msgid "left button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3447 -msgid "" -"moves to and selects the group pointed at, just like B " -"('BCRE>')." -msgstr "" - -#. type: TP -#: doc/tin.1:3447 doc/tin.1:3459 doc/tin.1:3472 -#, no-wrap -msgid "center button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3450 -msgid "quits the program, just like B ('B')." -msgstr "" - -#. type: TP -#: doc/tin.1:3450 doc/tin.1:3464 doc/tin.1:3477 -#, no-wrap -msgid "right button" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3453 -msgid "moves to the group pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3455 -msgid "" -"In the article menu, if the mouse is pointing at an article (or thread) " -"then:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3459 -msgid "" -"reads the article pointed at, just like B " -"('BCRE>'), or the thread, just like B ('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3464 -msgid "" -"exits the menu, catching up on the group if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3467 -msgid "moves to the article (or thread) pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3469 -msgid "In the thread menu, if the mouse is pointing at an article then:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3472 -msgid "reads article pointed at, just like B ('BCRE>')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3477 -msgid "" -"exits the menu, catching up on the thread if you have " -"B set in your configuration, just like B " -"('B')." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3480 -msgid "moves to the article pointed at." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3487 -msgid "" -"In other menus and areas button pressing reverts back to usual cut and paste " -"of B<\\%xterm>(1x), but after one click of any button." -msgstr "" - -#. type: SS -#: doc/tin.1:3487 -#, no-wrap -msgid "INDEX FILES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3492 -msgid "" -"If your news server supports NOV index files (see B<\\%newsoverview>(5), " -"most modern installations will) and you have a fast connection to your news " -"server then this section can be ignored." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3499 -msgid "" -"If your news server doesn't support NOV index files or you have a very slow " -"connection to your news server then B can cache the index for each " -"newsgroup if B is set to ON. Note that this cache can " -"use up large amounts of disk space if you read a lot of groups and/or high " -"traffic groups. To reduce the amount of disk space used, " -"B can be set to ON." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3508 -msgid "" -"Each user creates/updates his/her own index files that are stored in " -"I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news/>. If you " -"are reading via NNTP then the news server name will be appended to keep the " -"indexes for different servers separate. If you are reading off the local " -"spool and local overview files already exist then turning on caching will " -"have no effect. Likewise unless you see significant delays entering a group " -"when reading via NNTP then turning on caching will have little or no effect." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3515 -msgid "" -"Entering a group the first time tends to be slow because the index file must " -"be built from scratch. To alleviate the slowness start B to create all " -"index files for the groups you subscribe to with B and go for a " -"coffee. Subsequent readings of a group will only need to do incremental " -"updating of the index file and will be much faster as only new articles will " -"need to be cached." -msgstr "" - -#. type: Plain text -#: doc/tin.1:3520 -msgid "" -"As indexing might take some time you may want to run B from the system " -"batcher B<\\%cron>(8) with the ''B<-u>'' option:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3525 -#, no-wrap -msgid "\\f(CR30 6 * * * /usr/local/bin/tin -u\\fR\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3531 -msgid "" -"If you are low on local disk space you should consider to manually purge " -"cached data for groups you are not reading anymore with something like:" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3537 -#, no-wrap -msgid "" -"\\f(CRfind ${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news* " -"\\e\n" -"-type f -name \"[0-9]*.[0-9]\" -atime +28 | xargs rm -f\\fR\n" -msgstr "" - -#. type: SH -#: doc/tin.1:3542 doc/tin.5:21 -#, no-wrap -msgid "FILES" -msgstr "" - -#. TODO: mention dead.article, dead.articles -#. .article[.$$], .cancel[.$$], .letter[.$$]? -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. $TMPDIR/GNKSA (-D 64) -#. type: Plain text -#: doc/tin.1:3561 -msgid "For a detailed description see B<\\%tin>(5)." -msgstr "" - -#. TODO: mention -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.article -#. ${TIN_HOMEDIR:\-"$HOME"}/dead.articles -#. ${TIN_HOMEDIR:\-"$HOME"}/.article[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.cancel[.$$] -#. ${TIN_HOMEDIR:\-"$HOME"}/.letter[.$$] -#. ${XDG_RUNTIME_DIR:\-"$HOME"}/.slrnfaces -#. $PWD/trace[.out] (--with-trace) -#. $TMPDIR/NNTP (-D 1) -#. $TMPDIR/FILTER (-D 2) -#. $TMPDIR/ARTS (-D 2) -#. $TMPDIR/BITMAP (-D 4) -#. $TMPDIR/REFS.dump (-D 8) -#. $TMPDIR/REFS.info (-D 8) -#. $TMPDIR/MALLOC (-D 16) -#. $TMPDIR/ATTRIBUTES (-D 32) -#. $TMPDIR/SCOPES-R (-D 32) -#. $TMPDIR/SCOPES-W (-D 32) -#. $TMPDIR/ACTIVE (-D 64) -#. type: Plain text -#: doc/tin.1:3563 doc/tin.5:42 -msgid "I<$MAILCAPS>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3565 doc/tin.5:44 -msgid "I<~/.mailcap>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3567 doc/tin.5:46 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3569 doc/tin.5:48 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3571 doc/tin.5:50 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3573 doc/tin.5:52 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3576 doc/tin.5:221 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3579 doc/tin.5:231 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.cancelsecret>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3582 doc/tin.5:241 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.mime.types>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3584 doc/tin.5:243 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3586 doc/tin.5:245 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3589 doc/tin.5:252 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsauth>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3592 doc/tin.5:287 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3596 doc/tin.5:318 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/.oldnewsrc>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3600 doc/tin.5:326 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.signature>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3602 doc/tin.5:328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.Sig>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3605 doc/tin.5:335 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.sigfixed>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3608 doc/tin.5:342 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/.inputhistory>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3611 doc/tin.5:349 -msgid "I<${TIN_INDEX_MAILDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.mail/>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3615 doc/tin.5:357 -#, no-wrap -msgid "I<${TIN_INDEX_NEWSDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.news${NNTPSERVER:+\"-$NNTPSERVER\"}/>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3619 doc/tin.5:365 -msgid "I<${TIN_INDEX_SAVEDIR:-\"${TIN_HOMEDIR:-\"$HOME\"}/.tin\"}/.save/>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3622 doc/tin.5:372 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.mail>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3625 doc/tin.5:407 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/active.save>" -msgstr "" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. ${TIN_LIBDIR\-/news/etc"}/attributes -#. type: Plain text -#: doc/tin.1:3629 doc/tin.5:418 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3631 doc/tin.5:420 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/attributes>" -msgstr "" - -#. TODO: add missing descriptions and explain things in detail. -#. type: Plain text -#: doc/tin.1:3634 doc/tin.5:772 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/filter>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3638 doc/tin.5:915 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/keymap${${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}:+\".${LC_ALL:-\"${LC_MESSAGES:-\"${LC_CTYPE:-\"$LANG\"}\"}\"}\"}>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3640 doc/tin.5:917 -#, no-wrap -msgid "I\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3644 doc/tin.5:1163 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/mailgroups>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3647 doc/tin.5:1179 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/newsrctable>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3650 doc/tin.5:1224 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/posted>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3653 doc/tin.5:1239 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/Mail/posted>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3656 doc/tin.5:1249 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/postponed.articles>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3660 doc/tin.5:1259 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/motd>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3665 doc/tin.5:1270 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/msglog>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3670 doc/tin.5:1280 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/newsgroups>\n" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3675 doc/tin.5:1299 -#, no-wrap -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/$NNTPSERVER${NNTPPORT:+\":$NNTPPORT\"}/serverrc>\n" -msgstr "" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths (/news/etc/) -#. .IR ${TIN_LIBDIR\-"/news/etc"}/tinrc -#. type: Plain text -#: doc/tin.1:3680 doc/tin.5:1326 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3682 doc/tin.5:1328 -msgid "I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3685 doc/tin.5:2629 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3688 -msgid "I" -msgstr "" - -#. tin uses inns old (pre 2.x) Path convention. -#. as with inn >= 2.2.x getting more and more popular -#. we should think about checking for the new Paths -#. (described shown below). -#. type: Plain text -#: doc/tin.1:3691 doc/tin.5:2739 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}\"/\"${TIN_ACTIVEFILE:-active}>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3694 doc/tin.5:2800 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/active.times>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3697 doc/tin.5:2827 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/newsgroups>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3700 doc/tin.5:2850 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/organization>" -msgstr "" - -#. is the Path correct? or is it /news/etc/overview.fmt -#. type: Plain text -#: doc/tin.1:3703 doc/tin.5:2860 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/overview.fmt>" -msgstr "" - -#. is the Path correct? or is it /news/etc/subscriptions -#. type: Plain text -#: doc/tin.1:3708 doc/tin.5:2878 -msgid "I<${TIN_LIBDIR:-NEWSLIBDIR}/subscriptions>" -msgstr "" - -#. type: SH -#: doc/tin.1:3708 -#, no-wrap -msgid "ENVIRONMENT" -msgstr "" - -#. type: TP -#: doc/tin.1:3712 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3720 -msgid "" -"Define this variable if you want to specify command-line options that B " -"should be started with to save typing them each time it is started. The " -"contents of the environment variable are added to the front of the " -"command-line options before it is parsed therefore allowing an option " -"specified on the command-line to override the same option specified in the " -"environment." -msgstr "" - -#. type: TP -#: doc/tin.1:3720 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3725 -msgid "" -"Define this variable if you do not want the I<.tin> directory in " -"I<$HOME/>. E.g., if you want all B's private files in I you " -"would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3725 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3731 -msgid "" -"Define this variable if you do not want the I<.news> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's news " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3731 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3737 -msgid "" -"Define this variable if you do not want the I<.mail> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's mail " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3737 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3743 -msgid "" -"Define this variable if you do not want the I<.save> directory in " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/>. E.g., if you want all B's save " -"index files in I you would set $B to I." -msgstr "" - -#. type: TP -#: doc/tin.1:3743 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3748 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B is " -"running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3748 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3753 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is I. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3753 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3759 -msgid "" -"Define this variable if you want to override the B path that was " -"compiled into the B binary, default is B (see above). If " -"B is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3759 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3765 -msgid "" -"Define this variable if you want to override the B filename " -"that was compiled into the B binary, default is I<.overview>. If B " -"is running in NNTP mode setting this variable has no effect." -msgstr "" - -#. type: TP -#: doc/tin.1:3765 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3771 -msgid "" -"Define this variable if you want to override the B path " -"that was compiled into the B binary. If B is running in NNTP mode " -"setting this variable has no effect. If $B is set it is " -"prepended to $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3771 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3777 -msgid "" -"The default NNTP server to remotely read news from. This variable only needs " -"to be set if the ''B<-r>'' command-line option is specified and the file " -"I does not exist. The ''B<-g>'' command line option " -"overrides $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3777 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3782 -msgid "" -"The NNTP TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 119 (the default). The ''B<-p>'' command-line option " -"does override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3782 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3787 -msgid "" -"The NNTPS TCP-port to read news from. This variable only needs to be set if " -"the TCP-port is not 563 (the default). The ''B<-p>'' and ''B<-T>'' " -"command-line options do override $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3787 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3791 -msgid "" -"Set the article header field ''Distribution:'' to the contents of the " -"variable instead of the system default." -msgstr "" - -#. type: TP -#: doc/tin.1:3791 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3795 -msgid "" -"Set the ISO to ASCII charset decoding table character to use in decoding an " -"article text. Values can range from -1 to 6." -msgstr "" - -#. type: TP -#: doc/tin.1:3796 -#, no-wrap -msgid "B<-1>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3799 -msgid "no conversion" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3802 -msgid "universal table for many languages" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3805 -msgid "single-spacing universal table" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3808 -msgid "table for Danish, Dutch, German, Norwegian and Swedish" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3812 -msgid "" -"table for Danish, Finnish, Norwegian and Swedish using the appropriate ISO " -"646 variant" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3815 -msgid "table with B codes in brackets" -msgstr "" - -#. type: TP -#: doc/tin.1:3815 -#, no-wrap -msgid "B<5>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3818 -msgid "table for printers that allow overstriking with backspace" -msgstr "" - -#. type: TP -#: doc/tin.1:3818 -#, no-wrap -msgid "B<6>" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3821 -msgid "table for IBM PC character set (code page 437)" -msgstr "" - -#. type: TP -#: doc/tin.1:3822 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3829 -msgid "" -"Set the article header field ''Organization:'' to the contents of the " -"variable instead of the system default. If it points to a readable file a " -"random line from that file will be used. If reading news on an Apollo " -"DomainOS machine the environment variable $B has to be used instead " -"of $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3829 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3832 -msgid "DomainOS specific, same as $B on other OSs (see above)." -msgstr "" - -#. type: TP -#: doc/tin.1:3832 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3837 -msgid "" -"Set the article header field ''Reply-To:'' to the return address specified " -"by the variable. This is useful if you wish to receive replies at a " -"different address." -msgstr "" - -#. type: TP -#: doc/tin.1:3837 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3841 -msgid "" -"Overrides the full name given in the gecos-field in I, see also " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:3841 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3844 -msgid "Same as $B." -msgstr "" - -#. type: TP -#: doc/tin.1:3844 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3849 -msgid "Pathname of the user's home directory. See B<\\%environ>(5) for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3849 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3853 -msgid "" -"This variable has precedence over the default mailer that is used in all " -"mailing operations within B." -msgstr "" - -#. type: TP -#: doc/tin.1:3853 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3856 -msgid "Full path to the user's mailbox." -msgstr "" - -#. we don't support the %message || ?message notation -#. type: TP -#: doc/tin.1:3856 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3861 -msgid "" -"A colon-separated list of filenames which are checked for new mail. This " -"overrides the $B variable." -msgstr "" - -#. type: TP -#: doc/tin.1:3861 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3870 -msgid "" -"This variable has precedence over the default editor (i.e., B<\\%vi>(1)) " -"that is used in all editing operations within B (e.g., posting, " -"replying, follow-ups, ...). Evaluation order is " -"I<${VISUAL:-\"${EDITOR:-vi}\"}>. See B<\\%environ>(5) for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3870 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3879 -msgid "" -"If $B is unset, then this variable is looked up for a default " -"editor. If $B and $B are both unset, B uses the systems " -"default editor (i.e. B<\\%vi>(1) on UNIX-systems). See B<\\%environ>(5) " -"for more info." -msgstr "" - -#. type: TP -#: doc/tin.1:3879 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3885 -msgid "" -"A new group is checked against the list of patterns; if it matches, B " -"subscribes the user to the group without further query. See the section " -"\"NEWSGROUP LISTS & WILDCARDS\" for an explanation of the valid syntax. For " -"example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3887 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3892 -msgid "" -"will automatically subscribe the user to all new groups in the comp.os.unix " -"hierarchy, and all talk groups other than talk.politics groups (which will " -"be queried for as usual). Of course this does not work if B is started " -"with the ''B<-X>'' command-line switch." -msgstr "" - -#. type: TP -#: doc/tin.1:3892 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3896 -msgid "" -"Is handled like the $B variable, but groups matching the list " -"are unsubscribed from without further query. For example, setting" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3898 -msgid "I" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3902 -msgid "" -"will automatically unsubscribe the user from all new alt.flame groups and " -"all groups starting with u (university groups) other than UK groups (which " -"will be queried for as usual)." -msgstr "" - -#. type: TP -#: doc/tin.1:3902 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3906 -msgid "" -"A pathname of a directory made available for B to create temporary " -"files." -msgstr "" - -#. type: TP -#: doc/tin.1:3906 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3912 -msgid "" -"This variable can be used to override the default path search for " -"B<\\%mailcap>(5) files. See also B<\\%tin>(5)." -msgstr "" - -#. type: TP -#: doc/tin.1:3912 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3917 -msgid "" -"Set this variable to disable the use of B<\\%metamail>(1) or a replacement " -"(e.g., metamutt)." -msgstr "" - -#. type: TP -#: doc/tin.1:3917 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3921 -msgid "" -"MIME character set used if not configured via the tinrc variable " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:3921 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3926 -msgid "" -"Set this variable to point to B<\\%ispell>(1) or a replacement and its " -"cmd-line options." -msgstr "" - -#. type: TP -#: doc/tin.1:3926 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3933 -msgid "" -"Define any additional options that you wish to pass to your B<\\%pgp>(1) or " -"B<\\%gpg>(1) program." -msgstr "" - -#. type: TP -#: doc/tin.1:3933 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3938 -msgid "" -"Override the name of the B<\\%pgp>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" - -#. type: TP -#: doc/tin.1:3938 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3943 -msgid "" -"Override the name of the B<\\%gpg>(1) directory in B<$HOME> that holds your " -"keys etc.." -msgstr "" - -#. type: TP -#: doc/tin.1:3943 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3955 -msgid "" -"This variable determines the B<\\%locale>(5) category for character " -"handling functions. Usually it determines the character classes for pattern " -"matching character classification and case conversion. Currently this is not " -"true for B (which temporary unsets B<$LC_CTYPE> right before any match " -"is done to avoid confusion). Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%environ>(5) " -"for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3955 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3964 -msgid "" -"Formats of informative and diagnostic messages and interactive responses. " -"Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3964 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3972 -msgid "" -"Numeric value formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3972 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3980 -msgid "" -"Date and time formats. Its value should be of the form " -"I[I<_territory>][I<.codeset>][I<@modifier>]. See B<\\%locale>(5) " -"and B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3980 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3989 -msgid "" -"This variable overrides the value of the B<$LANG> variable and any other " -"B<$LC_> variable. Its value should be of the form " -"I[I<_territory>][I<.codeset>]. See B<\\%locale>(5) and " -"B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3989 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:3998 -msgid "" -"This variable determines the B<\\%locale>(5) category for any category not " -"specifically selected with a variable starting with B<$LC_>. Its value " -"should be of the form I[I<_territory>][I<.codeset>]. See " -"B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:3998 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4006 -msgid "" -"This variable defines a priority list for translations. Whenever a " -"translation is not available the next language from the list is tried. Its " -"value should be of the form I. Requires " -"B<$LC_ALL> or B<$LANG> to be set. See B<\\%environ>(5) for more " -"information." -msgstr "" - -#. type: TP -#: doc/tin.1:4006 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4016 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred width in " -"column positions for the terminal screen or window. If this variable is " -"unset or null, the implementation determines the number of columns, " -"appropriate for the terminal or window. When B<$COLUMNS> is set, any " -"terminal-width information implied by B<$TERM> will be overridden. Users and " -"portable applications should not set B<$COLUMNS> unless they wish to " -"override the system selection and produce output unrelated to the terminal " -"characteristics." -msgstr "" - -#. type: TP -#: doc/tin.1:4016 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4026 -msgid "" -"A decimal integer E 0 used to indicate the user's preferred number of " -"lines on a page or the vertical screen or window size in lines. A line in " -"this case is a vertical measure large enough to hold the tallest character " -"in the character set being displayed. If this variable is unset or null, the " -"implementation determines the number of lines, appropriate for the terminal " -"or window. When B<$LINES> is set, any terminal-height information implied by " -"B<$TERM> will be overridden. Users and portable applications should not set " -"B<$LINES> unless they wish to override the system selection." -msgstr "" - -#. type: TP -#: doc/tin.1:4026 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4032 -msgid "" -"The type of terminal in use. This is used when looking up termcap " -"sequences. See B<\\%environ>(5) for more information." -msgstr "" - -#. type: TP -#: doc/tin.1:4032 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4035 -msgid "Display name, pointing to the X server; required for xface." -msgstr "" - -#. type: TP -#: doc/tin.1:4035 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4039 -msgid "" -"Used for determining terminal's X window id; required for xface. Should be " -"set by the terminal emulator." -msgstr "" - -#. type: TP -#: doc/tin.1:4039 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4043 -msgid "" -"The pathname of the user's login shell. Used to set " -"B." -msgstr "" - -#. type: TP -#: doc/tin.1:4043 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4048 -msgid "The pathname of the user's dir to put non-essential run time files into." -msgstr "" - -#. type: SH -#: doc/tin.1:4048 -#, no-wrap -msgid "SIGNALS" -msgstr "" - -#. TODO: add missing, sort useful, document in detail -#. type: Plain text -#: doc/tin.1:4052 -msgid "B handles a couple of signals:" -msgstr "" - -#. type: TP -#: doc/tin.1:4052 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4055 doc/tin.1:4058 -msgid "Terminate gracefully." -msgstr "" - -#. type: TP -#: doc/tin.1:4055 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.1:4058 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4061 -msgid "Terminate gracefully but do not restore terminal (tty)." -msgstr "" - -#. type: TP -#: doc/tin.1:4061 -#, no-wrap -msgid "B" -msgstr "" - -# -# -#. .SH DIAGNOSTICS -#. give an overview of the most common error messages and how to cope with -#. them. -#. type: Plain text -#: doc/tin.1:4072 -msgid "Write out I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>-file." -msgstr "" - -#. type: SH -#: doc/tin.1:4072 -#, no-wrap -msgid "SECURITY" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4078 -msgid "" -"If B is started in debug mode (''B<-D n>'') it will create world " -"readable files in B<$TMPDIR> which may contain sensitive data like the users " -"NNTP password in cleartext (if running verbose). On multiuser-systems " -"B<$TMPDIR> should be set to a safe location before starting B in " -"(verbose) debug mode (e.g., B)." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4082 -msgid "" -"Using the ''B<-k>'' option to skip certificate verification makes the " -"session insecure as the server's certificate is not checked; avoid this " -"option whenever possible." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4089 -msgid "" -"If the server does not initially require authentication but supports " -"compression and compression is requested, B will exit when " -"authentication is required later on. Using the ''B<-A>'' command line option " -"in conjunction with ''B<-C>'' circumvents this behavior." -msgstr "" - -#. type: SH -#: doc/tin.1:4089 -#, no-wrap -msgid "CONFORMING TO" -msgstr "" - -#. - RFC\%2045, RFC\%2047, RFC\%2231, RFC\%2980, RFC\%3977, RFC\%4155 -#. RFC\%4643, RFC\%5322, RFC\%5536, RFC\%5537, RFC\%6048 or whatever -#. type: Plain text -#: doc/tin.1:4097 -msgid "" -"B does conform to the Base Definitions volume of IEEE Std 1003.1-2008, " -"Section 12, Utility Conventions (Utility Argument Syntax, Utility Syntax " -"Guidelines)." -msgstr "" - -#. type: SH -#: doc/tin.1:4097 -#, no-wrap -msgid "NOTES" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4104 -msgid "" -"Regular expression support is provided by the PCRE library package " -"B<\\%pcre>(3) or B<\\%pcre2>(3) which is open source software, written by " -"Philip Hazel, and copyright \\(co by the University of Cambridge, England." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4108 -msgid "Ehttps://www.pcre.org/E" -msgstr "" - -#. type: SH -#: doc/tin.1:4108 -#, no-wrap -msgid "BUGS" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4116 -msgid "" -"B\\0NNTPd, B<\\%noffle>(1) (E= V1.0-pre5) and B " -"(E= V1.1.91) can't handle pipelined GROUP commands (B). If " -"you run into trouble with any of the mentioned historical servers define " -"DISABLE_PIPELINING in include/autoconf.h and recompile." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4123 -msgid "" -"Using the ''B<-C>'' (COMPRESS) flag with B\\0nnrpd versions between " -"2.6.1 and 2.7.1 (both incl.) may cause B to hang and later timeout when " -"posting. This has been fixed in B\\0nnrpd version 2.7.2. As a " -"workaround simply don't use ''B<-C>''." -msgstr "" - -#. type: Plain text -#: doc/tin.1:4132 -msgid "" -"Before mailing a bug-report to Etin-bugs@tin.orgE please check if " -"you are using the latest (stable) release, and if not, please upgrade first! " -"Have a look at the doc/TODO file for known bugs. If you still think you've " -"found a bug, please use the B ('B') function and write in " -"English. Please do NOT enclose a core-file in your bug-report until we " -"request it." -msgstr "" - -#. type: SH -#: doc/tin.1:4132 -#, no-wrap -msgid "HISTORY" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4141 -msgid "" -"B is based on the B<\\%tass>(1) newsreader that was developed by Rich " -"Skrenta and posted to alt.sources in March 1991; its first version was " -"released on August 23rd 1991. B<\\%tass>(1) itself was heavily influenced " -"by notesfiles a public domain UNIX version of PLATO Notes, developed at the " -"University of Illinois by Ray Essick and Rob Kolstad in 1982. For a version " -"overview see" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4145 -msgid "Ehttp://www.tin.org/history.htmlE." -msgstr "" - -#. type: SH -#: doc/tin.1:4145 -#, no-wrap -msgid "CREDITS" -msgstr "" - -#. type: IP -#: doc/tin.1:4146 -#, no-wrap -msgid "Rich Skrenta" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4150 -msgid "author of B<\\%tass>(1) v3.2 which this newsreader used as its base." -msgstr "" - -#. type: IP -#: doc/tin.1:4150 -#, no-wrap -msgid "Bill Davidsen" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4152 -msgid "author of envarg.c environment variable reading routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4152 -#, no-wrap -msgid "Mike Gleason" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4154 -msgid "author of sigfile.c random signature generation routines." -msgstr "" - -#. type: IP -#: doc/tin.1:4154 -#, no-wrap -msgid "Markus Kuhn EMarkus.Kuhn@cl.cam.ac.ukE" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4156 -msgid "author of langinfo.c, charset.c and iso2asc.txt ISO-8859-1 documentation." -msgstr "" - -#. type: IP -#: doc/tin.1:4156 -#, no-wrap -msgid "Arnold D. Robbins" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4158 -msgid "author of strftime.c date formatting routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4158 -#, no-wrap -msgid "Rich Salz" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4160 -msgid "author of wildmat.c pattern matching and parsdate.y date parsing routines." -msgstr "" - -#. type: IP -#: doc/tin.1:4160 -#, no-wrap -msgid "Dave Taylor" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4164 -msgid "author of curses.c from the B<\\%elm>(1) mailreader." -msgstr "" - -#. type: IP -#: doc/tin.1:4164 -#, no-wrap -msgid "Chris Thewalt" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4168 -msgid "author of getline.c B<\\%emacs>(1) style editing routine." -msgstr "" - -#. type: IP -#: doc/tin.1:4168 -#, no-wrap -msgid "Steven Madsen" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4172 -msgid "for adding B<\\%pgp>(1) (Pretty Good Privacy) support." -msgstr "" - -#. type: IP -#: doc/tin.1:4172 -#, no-wrap -msgid "Philip Hazel Eph10@cam.ac.ukE" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4177 -msgid "" -"for B<\\%pcre>(3), B<\\%pcre2>(3) (Perl-compatible regular expression " -"library)." -msgstr "" - -#. type: IP -#: doc/tin.1:4177 -#, no-wrap -msgid "Mark Martinec Emark.martinec@ijs.siE" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4185 -msgid "for B<\\%snprintf>(3) and B<\\%vsnprintf>(3) fallbacks." -msgstr "" - -#. type: SH -#: doc/tin.1:4185 -#, no-wrap -msgid "AUTHOR" -msgstr "" - -#. type: TP -#: doc/tin.1:4186 -#, no-wrap -msgid "Iain Lea Eiain@bricbrac.deE" -msgstr "" - -#. type: SH -#: doc/tin.1:4190 -#, no-wrap -msgid "MAINTAINER" -msgstr "" - -#. type: TP -#: doc/tin.1:4191 -#, no-wrap -msgid "Urs Janssen Eurs@tin.orgE" -msgstr "" - -#. type: SH -#: doc/tin.1:4195 doc/tin.5:2890 -#, no-wrap -msgid "SEE ALSO" -msgstr "" - -#. type: Plain text -#: doc/tin.1:4259 -msgid "" -"B<\\%elm>(1), B<\\%emacs>(1), B<\\%gpg>(1), B<\\%inews>(1), B<\\%ispell>(1), " -"B<\\%lp>(1), B<\\%lpr>(1), B<\\%metamail>(1), B<\\%mutt>(1), " -"B<\\%noffle>(1), B<\\%perl>(1), B<\\%perlre>(1), B<\\%pgp>(1), B<\\%rn>(1), " -"B<\\%sendmail>(1), B<\\%shar>(1), B<\\%slrnface>(1), B<\\%tass>(1), " -"B<\\%unshar>(1), B<\\%uudecode>(1), B<\\%vi>(1), B<\\%xterm>(1x), " -"B<\\%heapsort>(3), B<\\%iconv>(3), B<\\%iconv_open>(3), " -"B<\\%nl_langinfo>(3), B<\\%pcre>(3), B<\\%pcre2>(3), B<\\%pcrepattern>(3), " -"B<\\%pcre2pattern>(3), B<\\%qsort>(3), B<\\%snprintf>(3), B<\\%strftime>(3), " -"B<\\%vsnprintf>(3), B<\\%wildmat>(3), B<\\%environ>(5), B<\\%locale>(5), " -"B<\\%mailcap>(5), B<\\%mbox>(5), B<\\%mmdf>(5), B<\\%newsoverview>(5), " -"B<\\%tin>(5), B<\\%cron>(8), B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B, B, B, " -"B, B, B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:13 -msgid "tin, rtin - related files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:20 -msgid "" -"This man page describes the various (config) files and their formats used by " -"the B<\\%tin>(1) newsreader. All files are expected to have unix style " -"('\\(rsn' aka LF) line endings." -msgstr "" - -#. type: Plain text -#: doc/tin.5:61 -msgid "" -"B<\\%mailcap>(5) files as defined in B. The mailcap files are " -"read by B<\\%tin>(1) to determine how to display non-text messages at the " -"local site. Any line that starts with \"#\" is a comment. Blank lines are " -"ignored. Otherwise, each line defines a single mailcap entry for a single " -"content type. Long lines may be continued by ending them with a backslash " -"character, \"\\(rs\"." -msgstr "" - -#. type: Plain text -#: doc/tin.5:64 -msgid "" -"Each individual mailcap entry consists of a content-type specification, a " -"command to execute, and (possibly) a set of optional \"flag\" values." -msgstr "" - -#. type: Plain text -#: doc/tin.5:69 -msgid "" -"The \"type\" field is simply any legal content type name. It is the string " -"that will be matched against the ''Content-Type:'' header to decide if this " -"is the mailcap entry that matches the current message. Additionally, the " -"type field may specify a subtype or a wildcard to match all subtypes." -msgstr "" - -#. type: Plain text -#: doc/tin.5:75 -msgid "" -"The \"command\" field is any UNIX command and is used to specify the " -"interpreter for the given type of message. It will be passed to the shell " -"via the B<\\%system>(3) facility." -msgstr "" - -# -#. Two special codes can appear in the viewing command for objects of type -#. multipart (any subtype). These are "%n" and "%F". %n will be replaced by -#. the number of parts within the multipart object. %F will be replaced by a -#. series of arguments, two for each part, giving first the content-type and -#. then the name of the temporary file where the decoded part has been stored. -#. type: Plain text -#: doc/tin.5:92 -msgid "" -"Semicolons and backslashes within the command or any flag field must be " -"quoted with backslashes. If the field contains \"%s\", those two characters " -"will be replaced by the name of a file that contains the body of the " -"message. If it contains \"%t\", those two characters will be replaced by the " -"content-type field, including the subtype, if any. If it contains \"%{\" " -"followed by a parameter name and a closing \"}\", then all those characters " -"will be replaced by the value of the named parameter, if any, from the " -"\\&''Content-Type:'' header. Finally, if the field contains \"\\(rs%\", " -"those two characters will be replaced by a single \"%\" character." -msgstr "" - -#. type: Plain text -#: doc/tin.5:94 -msgid "Besides the type and command field the following \"flags\" are defined:" -msgstr "" - -#. type: TP -#: doc/tin.5:94 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:104 -msgid "" -"The \"compose\" field may be used to specify a program that can be used to " -"compose a new body or body part in the given format. Its intended use is to " -"support mail composing agents that support the composition of multiple types " -"of mail using external composing agents. As with the view-command, the " -"semantics of program execution are operating system dependent. The result of " -"the composing program may be data that is not yet suitable for mail " -"transport \\(em that is, a Content-Transfer-Encoding may need to be applied " -"to the data." -msgstr "" - -#. type: TP -#: doc/tin.5:104 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:114 -msgid "" -"The \"composetyped\" field is similar to the \"compose\" field, but is to be " -"used when the composing program needs to specify the ''Content-Type:'' " -"header field to be applied to the composed data. The \"compose\" field is " -"simpler, and is preferred for use with existing (non-mail-oriented) programs " -"for composing data in a given format. The \"composetyped\" field is " -"necessary when the Content-Type information must include auxiliary " -"parameters, and the composition program must then know enough about mail " -"formats to produce output that includes the mail type information." -msgstr "" - -#. type: TP -#: doc/tin.5:114 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:120 -msgid "" -"The \"edit\" field may be used to specify a program that can be used to edit " -"a body or body part in the given format. In many cases, it may be identical " -"in content to the \"compose\" field, and shares the operating-system " -"dependent semantics for program execution." -msgstr "" - -#. type: TP -#: doc/tin.5:120 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:125 -msgid "" -"The \"print\" field may be used to specify a program that can be used to " -"print a message or body part in the given format. As with the view-command, " -"the semantics of program execution are operating system dependent." -msgstr "" - -#. type: TP -#: doc/tin.5:125 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:134 -msgid "" -"The \"test\" field may be used to test some external condition (e.g., the " -"machine architecture, or the window system in use) to determine whether or " -"not the mailcap line applies. It specifies a program to be run to test some " -"condition. The semantics of execution and of the value returned by the test " -"program are operating system dependent. If the test fails, a subsequent " -"mailcap entry should be sought. Multiple test fields are not permitted \\(em " -"since a test can call a program, it can already be arbitrarily complex." -msgstr "" - -#. type: TP -#: doc/tin.5:134 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:146 -msgid "" -"The \"needsterminal\" field indicates that the view-command must be run on " -"an interactive terminal. This is needed to inform window-oriented user " -"agents that an interactive terminal is needed. (The decision is not left " -"exclusively to the view-command because in some circumstances it may not be " -"possible for such programs to tell whether or not they are on interactive " -"terminals.) The needsterminal command should be assumed to apply to the " -"compose and edit commands, too, if they exist. Note that this is NOT a test " -"- it is a requirement for the environment in which the program will be " -"executed, and should typically cause the creation of a terminal window when " -"not executed on either a real terminal or a terminal window." -msgstr "" - -#. type: TP -#: doc/tin.5:146 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:153 -msgid "" -"The \"copiousoutput\" field indicates that the output from the view-command " -"will be an extended stream of output, and is to be interpreted as advice to " -"the UA (User Agent mail-reading program) that the output should be either " -"paged or made scroll-able. Note that it is probably a mistake if " -"needsterminal and copiousoutput are both specified." -msgstr "" - -#. type: TP -#: doc/tin.5:153 doc/tin.5:1172 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:158 -msgid "" -"The \"description\" field simply provides a textual description, optionally " -"quoted, that describes the type of data, to be used optionally by mail " -"readers that wish to describe the data before offering to display it." -msgstr "" - -#. type: TP -#: doc/tin.5:158 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:166 -msgid "" -"The \"textualnewlines\" field, if set to any non-zero value, indicates that " -"this type of data is line-oriented and that, if encoded in base64, all " -"newlines should be converted to canonical form (CRLF) before encoding, and " -"will be in that form after decoding. In general, this field is needed only " -"if there is line-oriented data of some type other than text/* or non-line- " -"oriented data that is a subtype of text." -msgstr "" - -#. type: TP -#: doc/tin.5:166 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:171 -msgid "" -"The \"x11-bitmap\" field names a file, in X11 bitmap (xbm) format, which " -"points to an appropriate icon to be used to visually denote the presence of " -"this kind of data." -msgstr "" - -#. type: TP -#: doc/tin.5:171 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:179 -msgid "" -"The \"nametemplate\" field gives a filename format, in which %s will be " -"replaced by a short unique string to give the name of the temporary file to " -"be passed to the viewing command. This is only expected to be relevant in " -"environments where filename extensions are meaningful, e.g., one could " -"specify that a GIF file being passed to a gif viewer should have a name " -"ending in \".gif\" by using \"nametemplate=%s.gif\"" -msgstr "" - -#. type: Plain text -#: doc/tin.5:184 -msgid "" -"B<\\%tin>(1) currently only respects the \"test\", \"description\", " -"\"nametemplate\" and partly the \"needsterminal\" flags, all other flags are " -"internally ignored. It also can't handle the \"%F\" and \"%n\" expansions " -"yet." -msgstr "" - -#. type: TP -#: doc/tin.5:184 doc/tin.5:272 doc/tin.5:302 doc/tin.5:393 doc/tin.5:724 -#: doc/tin.5:889 doc/tin.5:1201 -#, no-wrap -msgid "Example:" -msgstr "" - -#. type: Plain text -#: doc/tin.5:189 -#, no-wrap -msgid "# mailcap file example\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:191 -#, no-wrap -msgid "image/*;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:194 -#, no-wrap -msgid "xv -8 -geometry +0 '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:196 -#, no-wrap -msgid "description=%{name} %t-Image;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:198 -#, no-wrap -msgid "test=test \"$DISPLAY\" != \"\";\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:200 -#, no-wrap -msgid "nametemplate=%s.IMAGE\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:203 -#, no-wrap -msgid "message/rfc822;\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:206 -#, no-wrap -msgid "${PAGER:-\"more\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:208 -#, no-wrap -msgid "edit=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:210 -#, no-wrap -msgid "compose=${EDITOR:-\"vi\"} '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:212 -#, no-wrap -msgid "print=a2ps '%s';\\e\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:214 -#, no-wrap -msgid "needsterminal\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:227 -msgid "" -"default NNTP-server to read news from if not reading from the local spool. " -"\\&'B<-g> I', $B have higher priority (in that order), " -"the default server given at compile time has lower priority." -msgstr "" - -#. type: Plain text -#: doc/tin.5:237 -msgid "" -"secret to be used for cancel-locks if B<\\%tin>(1) is built with support " -"for it. An empty secret file disables the cancel-lock creation in that " -"case. This file should be readable only by the user." -msgstr "" - -#. type: Plain text -#: doc/tin.5:248 -msgid "mime type / filename extension pairs" -msgstr "" - -#. type: Plain text -#: doc/tin.5:261 -msgid "" -"\"I I [I]\" pairs for NNTP servers that " -"require authorization. If the password contains a space or a tab it must be " -"enclosed in double quotes (\"). Usernames must not be enclosed in double " -"quotes and thus can't contain spaces or tabs. Any line that starts with " -"\"#\" is a comment. Blank lines are ignored. This file should be readable " -"only for the user as it contains the user's unencrypted password for reading " -"news!" -msgstr "" - -#. type: TP -#: doc/tin.5:261 doc/tin.5:1185 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:265 -msgid "" -"full qualified domain name of the news server. Additionally, a port can be " -"specified by appending :portnumber." -msgstr "" - -#. type: TP -#: doc/tin.5:265 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:268 -msgid "user's unencrypted password for reading news." -msgstr "" - -#. type: TP -#: doc/tin.5:268 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:272 -msgid "" -"username on the news server if it differs from the local login. This field " -"is optional." -msgstr "" - -#. type: Plain text -#: doc/tin.5:276 -msgid "# sample .newsauth file" -msgstr "" - -#. type: Plain text -#: doc/tin.5:278 -msgid "news.example.org secret" -msgstr "" - -#. type: Plain text -#: doc/tin.5:280 -msgid "news.example.net arcane guest" -msgstr "" - -#. type: Plain text -#: doc/tin.5:282 -msgid "news.example.com \"top secret\" james.bond@example.com" -msgstr "" - -#. type: Plain text -#: doc/tin.5:291 -msgid "\"II [I
[,I
| -I
]...]\" lines." -msgstr "" - -#. type: TP -#: doc/tin.5:291 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:294 -msgid "the name of the newsgroup." -msgstr "" - -#. type: TP -#: doc/tin.5:294 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:297 -msgid "a flag indicating if the group is subscribed ':' or not '!\\&'." -msgstr "" - -#. type: TP -#: doc/tin.5:297 -#, no-wrap -msgid "B
" -msgstr "" - -#. type: Plain text -#: doc/tin.5:302 -msgid "" -"range of already read articles from that group; numbers separated by commas " -"with sequential numbers collapsed with hyphens. Empty lines and lines which " -"start with \"#\" are ignored and not written back." -msgstr "" - -#. type: Plain text -#: doc/tin.5:306 -msgid "# sample .newsrc file" -msgstr "" - -#. type: Plain text -#: doc/tin.5:308 -msgid "news.software.b! 1-666,669" -msgstr "" - -#. type: Plain text -#: doc/tin.5:310 -msgid "news.software.nntp: 1-13245,13247,13249" -msgstr "" - -#. type: Plain text -#: doc/tin.5:312 -msgid "news.software.readers: 1-19567,19571-19597" -msgstr "" - -#. type: Plain text -#: doc/tin.5:322 -msgid "backup of I<${TIN_HOMEDIR:-\"$HOME\"}/.newsrc>" -msgstr "" - -#. type: Plain text -#: doc/tin.5:331 -msgid "signature" -msgstr "" - -#. type: Plain text -#: doc/tin.5:338 -msgid "fixed part of a randomly generated signature, this will be added first" -msgstr "" - -#. type: Plain text -#: doc/tin.5:345 -msgid "history of last used strings" -msgstr "" - -#. type: Plain text -#: doc/tin.5:352 -msgid "mailgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:361 -msgid "newsgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:368 -msgid "saved newsgroups index files" -msgstr "" - -#. type: Plain text -#: doc/tin.5:378 -msgid "" -"active file (\"I I I I\" " -"quadruples) of user's mailgroups (requires B<\\%tin>(1) to be built with " -"mh-mail-handling support)." -msgstr "" - -#. type: TP -#: doc/tin.5:378 doc/tin.5:1169 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:382 -msgid "" -"must be the pathname of the mailbox relative to field #4 with '/' changed to " -"'.\\&'" -msgstr "" - -#. type: TP -#: doc/tin.5:382 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:386 -msgid "" -"just put a large number here, something higher than the highest message in " -"the mailbox" -msgstr "" - -#. type: TP -#: doc/tin.5:386 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:389 -msgid "put 0 here" -msgstr "" - -#. type: TP -#: doc/tin.5:389 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:393 -msgid "" -"path of mail spool directory. This must be the full pathname to the root of " -"the mail folder area." -msgstr "" - -#. type: Plain text -#: doc/tin.5:397 -msgid "Mail.inbox 12345 00000 /home/foo" -msgstr "" - -#. type: Plain text -#: doc/tin.5:399 -msgid "Mail.outbox 23456 00000 /home/foo" -msgstr "" - -#. type: Plain text -#: doc/tin.5:403 -msgid "" -"This allows access to the 'inbox' and 'outbox' folders of user foo. They " -"are accessed via /home/foo/Mail/inbox and /home/foo/Mail/outbox" -msgstr "" - -#. type: Plain text -#: doc/tin.5:410 -msgid "active file of user's saved newsgroups, used by B." -msgstr "" - -#. type: Plain text -#: doc/tin.5:432 -msgid "" -"The group attributes files may be used to override some global settings from " -"I<${TIN_HOMEDIR:-\"$HOME\"}/.tin/tinrc> on a per group basis. Order is " -"important as last match counts; this allows one to refine attributes for " -"narrowed scopes. Note that the IgrouplistE> line has to be " -"specified before the attributes are specified for that list and each " -"attribute can only be set once per scope section. All attributes are set to " -"a reasonable default so you only have to specify the attribute that you want " -"to change. All toggle attributes are set by specifying ON/OFF. Otherwise, " -"they function exactly as their global equivalents. The following group " -"attributes are available:" -msgstr "" - -#. type: TP -#: doc/tin.5:432 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:438 -msgid "" -"This changes the list of groups to which the attributes that follow will be " -"applied. See the section NEWSGROUP LISTS & WILDCARDS in B<\\%tin>(1) for " -"the types of pattern that can be used here." -msgstr "" - -#. type: TP -#: doc/tin.5:438 doc/tin.5:1347 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:441 doc/tin.5:444 doc/tin.5:447 doc/tin.5:450 doc/tin.5:453 -#: doc/tin.5:456 doc/tin.5:469 doc/tin.5:479 doc/tin.5:482 doc/tin.5:495 -#: doc/tin.5:498 doc/tin.5:501 doc/tin.5:504 doc/tin.5:507 doc/tin.5:514 -#: doc/tin.5:517 doc/tin.5:544 doc/tin.5:547 doc/tin.5:550 doc/tin.5:561 -#: doc/tin.5:564 doc/tin.5:567 doc/tin.5:570 doc/tin.5:573 doc/tin.5:576 -#: doc/tin.5:579 doc/tin.5:582 doc/tin.5:585 doc/tin.5:588 doc/tin.5:594 -#: doc/tin.5:597 doc/tin.5:600 doc/tin.5:603 doc/tin.5:606 doc/tin.5:609 -#: doc/tin.5:612 doc/tin.5:618 doc/tin.5:621 doc/tin.5:624 doc/tin.5:627 -#: doc/tin.5:630 doc/tin.5:633 doc/tin.5:636 doc/tin.5:639 doc/tin.5:642 -#: doc/tin.5:645 doc/tin.5:703 -msgid "Identical to the tinrc variable of the same name" -msgstr "" - -#. type: TP -#: doc/tin.5:441 doc/tin.5:1351 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:444 doc/tin.5:1354 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:447 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:450 doc/tin.5:1403 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:453 doc/tin.5:1407 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:456 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:460 -msgid "" -"Automatically perform the B ('B') command after " -"entering the group." -msgstr "" - -#. type: TP -#: doc/tin.5:460 doc/tin.5:1414 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:466 -msgid "" -"Can be used to override the global setting in tinrc on a per group " -"basis. For more information read section AUTOMATIC MAILING AND SAVING NEW " -"NEWS in B<\\%tin>(1)." -msgstr "" - -#. type: TP -#: doc/tin.5:466 doc/tin.5:1551 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:469 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:476 -msgid "" -"If this is set to ON, then saved article files that have been post-processed " -"will be automatically deleted, otherwise the user will be asked whether to " -"delete the post-processed files. Automatic processing of marked articles " -"using B ('B') will suppress prompting." -msgstr "" - -#. type: TP -#: doc/tin.5:476 doc/tin.5:1672 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:479 doc/tin.5:1679 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:482 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:486 -msgid "" -"Mailbox to save sent mails. The format of the mailbox is controlled via the " -"tinrc B variable." -msgstr "" - -#. type: TP -#: doc/tin.5:486 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:489 -msgid "Set ''Followup-To:'' header to the specified group(s)." -msgstr "" - -#. type: TP -#: doc/tin.5:489 doc/tin.5:802 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:492 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:492 doc/tin.5:1714 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:495 doc/tin.5:1717 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:498 doc/tin.5:1797 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:501 doc/tin.5:1809 doc/tin.5:2666 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:504 doc/tin.5:1829 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:507 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:511 -msgid "" -"Used when a group is a mailing list. All responses to the group will be " -"directed to this email address instead" -msgstr "" - -#. type: TP -#: doc/tin.5:511 doc/tin.5:1867 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:514 doc/tin.5:1864 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:517 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:534 -msgid "" -"Determines whether usenet articles are forwarded as attachment or " -"inline. When set to OFF, the forwarded article will be included in the body " -"of the mail, while setting this variable to ON will cause the article to be " -"attached as a separate MIME part. Enabling B is particularly " -"useful for articles consisting of multiple MIME parts such as PGP/MIME " -"signed messages or being encoded in a different character set than your " -"local one. It is also useful if the receiver should be able to operate on " -"the entire forwarded article (i.e., view or save it without your " -"comments). On the other hand, if you want to forward only some parts of the " -"article or to insert 'inline' annotations, you might want to disable this " -"option. Currently mime_forward is forced if the article to be attached is a " -"multipart MIME article, this may change in a future version. Please note " -"that for this option to have effect, the tinrc variable " -"B has to be set to 0 (which is the default)." -msgstr "" - -#. type: TP -#: doc/tin.5:534 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:541 -msgid "" -"A comma separated list of MIME major/minor Content-Types that will be saved " -"when using the view/save and save/autosave features. A single * can be used " -"to wildcard the major and/or minor type and a ! as the first character in an " -"entry will negate it, eg: image/*,!image/bmp,!text/html. Default is */*" -msgstr "" - -#. type: TP -#: doc/tin.5:541 doc/tin.5:1950 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:544 doc/tin.5:1957 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:547 doc/tin.5:1966 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:550 doc/tin.5:2639 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:558 -msgid "" -"This can be used to set the article header field ''Organization:''. It " -"overrides the setting (if any) of organization in I " -"and $B (or $B on Apollo DomainOS). If it points to a " -"readable file a random line from that file will be used. Note that some news " -"servers might still overwrite the \\&''Organization:'' header." -msgstr "" - -#. type: TP -#: doc/tin.5:558 doc/tin.5:2009 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:561 doc/tin.5:2013 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:564 doc/tin.5:2024 doc/tin.5:2663 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:567 doc/tin.5:2037 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:570 doc/tin.5:2029 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:573 doc/tin.5:2061 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:576 doc/tin.5:2075 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:579 doc/tin.5:2079 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:582 doc/tin.5:2083 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:585 doc/tin.5:2148 -#, no-wrap -msgid "B" -msgstr "" - -#. TODO: document option -#. type: TP -#: doc/tin.5:588 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:591 doc/tin.5:2224 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:594 doc/tin.5:2207 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:597 doc/tin.5:2256 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:600 doc/tin.5:2264 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:603 doc/tin.5:2267 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:606 doc/tin.5:2270 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:609 doc/tin.5:2283 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:612 doc/tin.5:2293 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:615 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:615 doc/tin.5:2322 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:618 doc/tin.5:2389 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:621 doc/tin.5:2394 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:624 doc/tin.5:2438 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:627 doc/tin.5:2414 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:630 doc/tin.5:2433 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:633 doc/tin.5:2467 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:636 doc/tin.5:2492 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:639 doc/tin.5:2557 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:642 doc/tin.5:2615 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:645 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:653 -msgid "" -"A piece of text that will be added at the start of a message body. If this " -"string starts with a / or ~ then it is assumed to be the name of a file " -"containing the text to insert. If the string starts with a ! then what " -"follows is assumed to be the path to a program to be executed to generate " -"the content. %G is expanded to the current news.group.name and %P is " -"expanded to the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:653 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:656 -msgid "Insert ''X-Comment-To:'' header, this is only useful in FIDO groups." -msgstr "" - -#. type: TP -#: doc/tin.5:656 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:665 -msgid "" -"A string including header-name and the contents of the header that will be " -"automatically added when posting. If the string starts with a / or ~ then it " -"is assumed to be the name of a file containing the header and its content to " -"be inserted. If the string starts with a ! then what follows is assumed to " -"be the path to a program to be executed to generate the header and its " -"content. %G is expanded to the current news.group.name and %P is expanded to " -"the news.group.name with all '.\\&' replaced by '/'." -msgstr "" - -#. type: TP -#: doc/tin.5:665 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:671 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be used." -msgstr "" - -#. type: TP -#: doc/tin.5:671 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:674 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:674 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:677 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:677 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:680 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:680 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:686 -msgid "" -"A comma-separated list of newsgroup patterns (wildmat-style) to which groups " -"the filter rule added by B will be applied. If unset the " -"default from the tinrc variable B will be " -"used." -msgstr "" - -#. type: TP -#: doc/tin.5:686 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:689 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:689 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:692 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:692 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:695 -msgid "Identical to the tinrc variable B" -msgstr "" - -#. type: TP -#: doc/tin.5:695 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:700 -msgid "" -"Path and options for B<\\%ispell>(1)-like spell-checker, e.g., \"aspell " -"--mode=email --dont-backup check\"" -msgstr "" - -#. type: TP -#: doc/tin.5:700 doc/tin.5:1902 -#, no-wrap -msgid "B" -msgstr "" - -#. type: TP -#: doc/tin.5:703 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:714 -msgid "" -"Assume (broken) articles without MIME charset declaration have this charset " -"\\(em default is US-ASCII. This attribute works only on systems with working " -"B<\\%iconv>(3) or B<\\%ucnv_*>(), others might have to compile B<\\%tin>(1) " -"with --disable-mime-strict-charset." -msgstr "" - -#. type: TP -#: doc/tin.5:714 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:724 -msgid "" -"Guess charset for (broken) articles without MIME charset declaration. This " -"attribute works only on systems with working B<\\%iconv>(3) or " -"B<\\%ucnv_*>() and B<\\%ucsdet_getName()> from libicui18n. It has no effect " -"if undeclared_charset is also set." -msgstr "" - -#. type: Plain text -#: doc/tin.5:734 -#, no-wrap -msgid "" -"# include extra headers\n" -"# assume ISO-8859-1 as charset if no charset is declared\n" -"# in all but fido7.* groups\n" -"scope=*,!fido7.*\n" -"x_headers=~/.tin/headers\n" -"undeclared_charset=ISO-8859-1\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:738 -#, no-wrap -msgid "" -"# in *sources* set post process type to shar only\n" -"scope=*sources*\n" -"post_process_type=1\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:745 -#, no-wrap -msgid "" -"# in *binaries* turn on full post processing,\n" -"# remove tmp files and set Followup-To: poster\n" -"scope=*binaries*\n" -"post_process_type=2\n" -"delete_tmp_files=ON\n" -"followup_to=poster\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:751 -#, no-wrap -msgid "" -"# in fido.* newsgroups change quote_chars\n" -"# and add X-Comment-To: line\n" -"scope=fido.*\n" -"quote_chars=%IE_\n" -"x_comment_to=ON\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:755 -#, no-wrap -msgid "" -"# in fido7.* newsgroups guess charset\n" -"scope=fido7.*\n" -"undeclared_cs_guess=ON\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:761 -#, no-wrap -msgid "" -"# in *.test newsgroups, don't append signature\n" -"# and preset Subject\n" -"scope=*.test\n" -"sigfile=--none\n" -"x_headers=Subject: test - ignore - no reply\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:765 -#, no-wrap -msgid "" -"# assume ISO-2022-JP-2 as charset\n" -"scope=fj.*,japan.*\n" -"undeclared_charset=ISO-2022-JP-2\n" -msgstr "" - -#. type: Plain text -#: doc/tin.5:779 -msgid "" -"The filter file is used to assign scores to certain articles. Based on the " -"score an article can be filtered out (hidden) or marked hot. Empty lines or " -"lines beginning with a '#' are ignored. Multiple matching-rules in the same " -"scope are all applied individually and not only when they all hit at the " -"same time (logical OR not AND)." -msgstr "" - -#. type: TP -#: doc/tin.5:779 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:788 -msgid "" -"Every entry (rule) in the filter file might get a comment. Multiple lines " -"are allowed (but only for comments yet). Every line must start with the " -"\"comment=\" keyword. Comments must appear first in the rule. Comment lines " -"placed within a rule will be moved to the begin of the next rule. This might " -"be changed in the future. Don't use '#' to mark comments as those lines are " -"ignored and your comments will get lost on the next write of the file." -msgstr "" - -#. type: TP -#: doc/tin.5:788 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:792 -msgid "" -"A comma-separated list of newsgroup patterns in wildmat-style to which " -"groups the filter rule will be applied. This line is mandatory!" -msgstr "" - -#. type: TP -#: doc/tin.5:792 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:795 -msgid "0=case-sensitive, 1=case-insensitive" -msgstr "" - -#. type: TP -#: doc/tin.5:795 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:798 -msgid "" -"Score value of the rule; can also be one of the magic words \"kill\" or " -"\"hot\"." -msgstr "" - -#. type: TP -#: doc/tin.5:798 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:802 -msgid "" -"Match against ''Subject:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: Plain text -#: doc/tin.5:811 -msgid "" -"Match against ''From:''. B<\\%tin>(1) converts the contents of the " -"''From:'' header to an old style e-mail address, e.g., ''some@body.example " -"(John Doe)'' instead of ''John Doe Esome@body.exampleE'', before " -"trying to match the patterns in the filter rule. The matching type used " -"(wildmat or regex) depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:811 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:816 -msgid "" -"Match against ''Message-ID:'' and full ''References:''. The matching type " -"used (wildmat or regex) depends on the setting of the tinrc variable " -"B." -msgstr "" - -#. type: TP -#: doc/tin.5:816 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:821 -msgid "" -"Match against ''Message-ID:'' and last ''References:'' entry (direct " -"responses) only. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:821 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:825 -msgid "" -"Match against ''Message-ID:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:825 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:829 -msgid "" -"Match against ''References:''. The matching type used (wildmat or regex) " -"depends on the setting of the tinrc variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:829 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:832 -msgid "" -"Match against ''Lines:'', Enum matches less than, Enum matches more " -"than." -msgstr "" - -#. type: TP -#: doc/tin.5:832 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:839 -msgid "" -"Match against ''From:'' address parser return codes. Enum matches less " -"than, Enum matches more than the returned numeric " -"value. GNKSA_LOCAL_DOMAIN_LITERAL or GNKSA_INVALID_DOMAIN are only returned " -"if B is set to false. As the built in domain " -"list is outdated this should be considered carefully." -msgstr "" - -#. type: ta -#: doc/tin.5:841 -#, no-wrap -msgid "\\w'%406\t'u +\\w'GNKSA_ZERO_LENGTH_LOCAL_WORD'u" -msgstr "" - -#. type: Plain text -#: doc/tin.5:871 -#, no-wrap -msgid "" -" B<0>\tGNKSA_OK\n" -" B<1>\tGNKSA_INTERNAL_ERROR\n" -"B<100>\tGNKSA_LANGLE_MISSING\n" -"B<101>\tGNKSA_LPAREN_MISSING\n" -"B<102>\tGNKSA_RPAREN_MISSING\n" -"B<103>\tGNKSA_ATSIGN_MISSING\n" -"B<104>\tGNKSA_RANGLE_MISSING\n" -"B<200>\tGNKSA_SINGLE_DOMAIN\n" -"B<201>\tGNKSA_INVALID_DOMAIN\n" -"B<202>\tGNKSA_ILLEGAL_DOMAIN\n" -"B<203>\tGNKSA_UNKNOWN_DOMAIN\n" -"B<204>\tGNKSA_INVALID_FQDN_CHAR\n" -"B<205>\tGNKSA_ZERO_LENGTH_LABEL\n" -"B<206>\tGNKSA_ILLEGAL_LABEL_LENGTH\n" -"B<207>\tGNKSA_ILLEGAL_LABEL_HYPHEN\n" -"B<208>\tGNKSA_ILLEGAL_LABEL_BEGNUM\n" -"B<209>\tGNKSA_BAD_DOMAIN_LITERAL\n" -"B<210>\tGNKSA_LOCAL_DOMAIN_LITERAL\n" -"B<211>\tGNKSA_RBRACKET_MISSING\n" -"B<300>\tGNKSA_LOCALPART_MISSING\n" -"B<301>\tGNKSA_INVALID_LOCALPART\n" -"B<302>\tGNKSA_ZERO_LENGTH_LOCAL_WORD\n" -"B<400>\tGNKSA_ILLEGAL_UNQUOTED_CHAR\n" -"B<401>\tGNKSA_ILLEGAL_QUOTED_CHAR\n" -"B<402>\tGNKSA_ILLEGAL_ENCODED_CHAR\n" -"B<403>\tGNKSA_BAD_ENCODE_SYNTAX\n" -"B<404>\tGNKSA_ILLEGAL_PAREN_CHAR\n" -"B<405>\tGNKSA_INVALID_REALNAME\n" -"B<406>\tGNKSA_MISSING_REALNAME\n" -msgstr "" - -#. type: TP -#: doc/tin.5:873 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:880 -msgid "" -"Match against ''Xref:'' line. Before any matching is done the line is turned " -"into the same format ''Newsgroups:'' has that is it is turned into a comma " -"separated newsgroup list with all other information (i.e., the article " -"counter) removed. The matching type used (wildmat or regex) depends on the " -"setting of the tinrc variable B." -msgstr "" - -#. TODO: document option in detail -#. type: TP -#: doc/tin.5:880 -#, no-wrap -msgid "B" -msgstr "" - -#. type: Plain text -#: doc/tin.5:886 -msgid "" -"Match against ''Path:'' line. This may not work on some servers. The " -"matching type used (wildmat or regex) depends on the setting of the tinrc " -"variable B." -msgstr "" - -#. type: TP -#: doc/tin.5:886 doc/tin.5:2810 -#, no-wrap -msgid "B