PACKAGE NAME:  aaa_base-13.37-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aaa_base: aaa_base (Basic Linux filesystem package)
aaa_base:
aaa_base: Sets up the empty directory tree for Slackware and adds an email to
aaa_base: root's mailbox welcoming them to Linux. :)  This package should be
aaa_base: installed first, and never uninstalled.
aaa_base:
aaa_base:
aaa_base:
aaa_base:
aaa_base:
aaa_base:

PACKAGE NAME:  aaa_elflibs-13.37-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  4105 K
PACKAGE SIZE (uncompressed):  13770 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aaa_elflibs: aaa_elflibs (shared libraries needed by many programs)
aaa_elflibs:
aaa_elflibs: This is a collection of shared libraries needed to run Linux programs.
aaa_elflibs: ELF (Executable and Linking Format) is the standard Linux binary 
aaa_elflibs: format.  These libraries are gathered from other Slackware packages
aaa_elflibs: and are intended to give a fairly complete initial set of libraries.
aaa_elflibs: This package should be not upgraded or reinstalled (it could copy
aaa_elflibs: over newer library versions).
aaa_elflibs:
aaa_elflibs:
aaa_elflibs:

PACKAGE NAME:  aaa_terminfo-5.8-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  720 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aaa_terminfo: aaa_terminfo (a basic collection of terminfo entries)
aaa_terminfo:
aaa_terminfo: This is a starter set of files from the terminfo database, which
aaa_terminfo: should be enough in most cases.  The complete set (from which this
aaa_terminfo: is derived) can be found in the ncurses package.
aaa_terminfo:
aaa_terminfo: The terminfo database describes the characteristics of terminals, so
aaa_terminfo: don't try to log in without this package.  :-)
aaa_terminfo:
aaa_terminfo:
aaa_terminfo:

PACKAGE NAME:  acl-2.2.47_1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  128 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acl: acl (tools for using POSIX Access Control Lists)
acl:
acl: This package contains a set of tools and libraries for manipulating
acl: POSIX Access Control Lists.  POSIX Access Control Lists (defined in
acl: POSIX 1003.1e draft standard 17) are used to define more fine-grained
acl: discretionary access rights for files and directories.
acl:
acl:
acl:
acl:
acl:

PACKAGE NAME:  acpid-2.0.7-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  38 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acpid: acpid (ACPI daemon)
acpid:
acpid: Most modern computers support the Advanced Configuration and Power
acpid: Interface (ACPI) standard to allow intelligent power management.
acpid: This package contains acpid, which is the user-space daemon needed in
acpid: order to make the Linux ACPI support completely functional.
acpid:
acpid: ACPI must be compiled into the kernel to run acpid.
acpid:
acpid:
acpid:

PACKAGE NAME:  apmd-3.2.2-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  53 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
apmd: apmd (Advanced Power Management daemon)
apmd:
apmd: apmd is an APM monitoring daemon, and works in conjunction with the
apmd: APM BIOS driver in the kernel.  Apmd (and the included tools) handle
apmd: tasks such as automatically putting a laptop into suspend when the
apmd: power level drop below a certain point.  This package also includes
apmd: the graphical power management tools xapm and xbattery.
apmd:
apmd: The apmd tools were written by Rik Faith and are maintained by
apmd: Avery Pennarun.  xbattery was written by Nathan Sidwell.
apmd:

PACKAGE NAME:  attr-2.4.43_1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  69 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
attr: attr (tools for using extended attributes on filesystems)
attr:
attr: This package contains a set of tools for manipulating extended
attr: attributes (name:value pairs associated permanently with files and
attr: directories) on filesystem objects, and the library and header files
attr: needed to develop programs which make use of extended attributes.
attr: Extended attributes are used to provide additional functionality to
attr: a filesystem.  For example, Access Control Lists (ACLs) are
attr: implemented using extended attributes.
attr:
attr:

PACKAGE NAME:  bash-4.1.010-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  943 K
PACKAGE SIZE (uncompressed):  3770 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bash: bash (sh-compatible shell)
bash:
bash: The GNU Bourne-Again SHell.  Bash is a sh-compatible command
bash: interpreter that executes commands read from the standard input or
bash: from a file.  Bash also incorporates useful features from the Korn
bash: and C shells (ksh and csh).  Bash is ultimately intended to be a
bash: conformant implementation of the IEEE Posix Shell and Tools
bash: specification (IEEE Working Group 1003.2).
bash:
bash: Bash must be present for the system to boot properly.
bash:

PACKAGE NAME:  bin-11.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bin: bin (some command-line utilities)
bin:
bin: The bin package is a collection of miscellaneous command-line 
bin: utilities.  Some of these (such as 'tempfile') are used in system
bin: scripts.
bin:
bin:
bin:
bin:
bin:
bin:

PACKAGE NAME:  bzip2-1.0.6-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  124 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bzip2: bzip2 (a block-sorting file compressor)
bzip2:
bzip2: Bzip2 compresses files using the Burrows-Wheeler block sorting text
bzip2: compression algorithm, and Huffman coding.  Compression is generally
bzip2: considerably better than that achieved by more conventional LZ77/LZ78-
bzip2: based compressors, and approaches the performance of the PPM family of
bzip2: statistical compressors. 
bzip2:
bzip2: Julian Seward <jseward@acm.org> is the author of bzip2.
bzip2:
bzip2:

PACKAGE NAME:  coreutils-8.10-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  2117 K
PACKAGE SIZE (uncompressed):  12950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
coreutils: coreutils (core GNU utilities)
coreutils:
coreutils: These are the GNU core utilities, the basic command line programs
coreutils: such as 'mkdir', 'ls', and 'rm' that are needed for the system to
coreutils: run.  This package is the union of the GNU fileutils, sh-utils, and
coreutils: textutils packages.  Most of these programs have significant
coreutils: advantages over their Unix counterparts, such as greater speed,
coreutils: additional options, and fewer arbitrary limits.
coreutils:
coreutils:
coreutils:

PACKAGE NAME:  cpio-2.11-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  178 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cpio: cpio (backup and archiving utility)
cpio:
cpio: This is GNU cpio, a program to manage archives of files. This package
cpio: also includes mt, a tape drive control program. cpio copies files into
cpio: or out of a cpio or tar archive, which is a file that contains other
cpio: files plus information about them, such as their pathname, owner,
cpio: timestamps, and access permissions. The archive can be another file on
cpio: the disk, a magnetic tape, or a pipe.
cpio:
cpio:
cpio:

PACKAGE NAME:  cpufrequtils-008-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  34 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cpufrequtils: cpufrequtils (Kernel CPUfreq utilities)
cpufrequtils:
cpufrequtils: The cpufrequtils package makes access to the Linux kernel CPUfreq
cpufrequtils: subsystem easier for users and cpufreq userspace tools.  It contains
cpufrequtils: a library used by other programs (libcpufreq), and command line tools
cpufrequtils: to determine current CPUfreq settings and to modify them.
cpufrequtils:
cpufrequtils: Dominik Brodowski is the cpufrequtils maintainer.
cpufrequtils: The cpufrequtils page is hosted on kernel.org:
cpufrequtils: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufreq.html
cpufrequtils:

PACKAGE NAME:  cryptsetup-1.2.0-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  114 K
PACKAGE SIZE (uncompressed):  460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cryptsetup: cryptsetup (utility for setting up encrypted filesystems)
cryptsetup:
cryptsetup: LUKS is a standard for cross-platform hard disk encryption.
cryptsetup: It provides secure management of multiple userpasswords and
cryptsetup: stores setup information in the partition header.
cryptsetup: LUKS for dm-crypt is now implemented in cryptsetup replacing the
cryptsetup: original cryptsetup. It provides all the functionally of the
cryptsetup: original version plus all LUKS features.
cryptsetup:
cryptsetup: cryptsetup home:  http://code.google.com/p/cryptsetup/
cryptsetup:

PACKAGE NAME:  cups-1.4.6-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  2045 K
PACKAGE SIZE (uncompressed):  12350 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cups: CUPS (Common UNIX Printing System)
cups:
cups: The Common UNIX Printing System provides a portable printing layer for
cups: UNIX(R)-like operating systems. It has been developed by Easy Software
cups: Products to promote a standard printing solution for all UNIX vendors
cups: and users.  CUPS uses the Internet Printing Protocol ("IPP") as the
cups: basis for managing print jobs and queues.  The CUPS package includes
cups: System V and Berkeley command-line interfaces, a PostScript RIP
cups: package for supporting non-PostScript printer drivers, and tools for
cups: creating additional printer drivers and other CUPS services.
cups:

PACKAGE NAME:  cxxlibs-6.0.14-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  854 K
PACKAGE SIZE (uncompressed):  5380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cxxlibs: cxxlibs (C++ shared library compatibility package)
cxxlibs:
cxxlibs: This package contains the shared libraries needed to run dynamically
cxxlibs: linked C++ binaries linked with older versions of libstdc++.
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:
cxxlibs:

PACKAGE NAME:  dbus-1.4.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  331 K
PACKAGE SIZE (uncompressed):  1380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dbus: dbus (D-Bus message bus system)
dbus:
dbus: D-Bus supplies both a system daemon (for events such as "new hardware
dbus: device added" or "printer queue changed") and a per user login
dbus: session daemon (for general IPC needs among user applications).
dbus: Also, the message bus is built on top of a general one-to-one message
dbus: passing framework, which can be used by any two apps to communicate
dbus: directly (without going through the message bus daemon). 
dbus:
dbus:
dbus:

PACKAGE NAME:  dcron-4.4-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dcron: dcron (Dillon's Cron daemon)
dcron:
dcron: The cron daemon runs in the background and executes tasks on behalf of
dcron: users at the appropriate time.  Many timed system tasks are started
dcron: with cron, such as the nightly indexing with updatedb.
dcron:
dcron: dcron was written entirely from scratch by Matthew Dillon.
dcron:
dcron:
dcron:
dcron:

PACKAGE NAME:  devs-2.3.1-noarch-25.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  96 K
PACKAGE SIZE (uncompressed):  5020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
devs: devs (system device files)
devs:
devs: This package creates special files in the /dev directory that 
devs: represent your system's hardware, and a tool (/dev/MAKEDEV) for
devs: creating new device files.  These files are required to access
devs: hardware on a Linux system.
devs:
devs:
devs:
devs:
devs:

PACKAGE NAME:  dialog-1.1_20100428-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  127 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dialog: dialog (display dialog boxes from shell scripts)
dialog:
dialog: Dialog is a program to present a variety of questions or display
dialog: messages using dialog boxes from a shell script.  The Slackware
dialog: package management script "pkgtool" uses this, as do various other
dialog: menu-driven console scripts.
dialog:
dialog: Dialog was originally contributed to Slackware by Savio Lam, and has
dialog: been contributed to by many.  Dialog is currently maintained by
dialog: Thomas E. Dickey.
dialog:

PACKAGE NAME:  dosfstools-3.0.11-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dosfstools: dosfstools (tools for working with FAT filesystems)
dosfstools:
dosfstools: Utilities for creating FAT filesystems (mkdosfs), and for checking
dosfstools: and repairing them (dosfsck).
dosfstools:
dosfstools:
dosfstools:
dosfstools:
dosfstools:
dosfstools:
dosfstools:

PACKAGE NAME:  e2fsprogs-1.41.14-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  659 K
PACKAGE SIZE (uncompressed):  2990 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
e2fsprogs: e2fsprogs (ext2 and ext3 filesystems utilities)
e2fsprogs:
e2fsprogs: Utilities needed to create and maintain ext2 and ext3 filesystems.
e2fsprogs:
e2fsprogs: These utilities were written by Remy Card (the developer and
e2fsprogs: maintainer of the ext2 fs) and Theodore T'so.
e2fsprogs:
e2fsprogs:
e2fsprogs:
e2fsprogs:
e2fsprogs:

PACKAGE NAME:  e2fsprogs-libs-1.41.14-x86_64-1vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  util-linux-ng >= 2.16
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
e2fsprogs-libs: e2fsprogs (e2fsprogs libraries)
e2fsprogs-libs:
e2fsprogs-libs: e2fsprogs libraries.
e2fsprogs-libs:
e2fsprogs-libs: These libraries were written by Remy Card (the developer and
e2fsprogs-libs: maintainer of the ext2 fs) and Theodore T'so.
e2fsprogs-libs:
e2fsprogs-libs: http://e2fsprogs.sourceforge.net/
e2fsprogs-libs:
e2fsprogs-libs:
e2fsprogs-libs: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  ed-1.4-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  62 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ed: ed (text editor)
ed:
ed: GNU ed is an 8-bit clean, more or less POSIX-compliant implementation
ed: of the standard Unix line editor.  These days, full-screen editors
ed: have rendered 'ed' mostly of historical interest.  Nonetheless, it
ed: appeals to a handful of aging programmers who still believe that
ed: "Small is Beautiful".
ed:
ed:
ed:
ed:

PACKAGE NAME:  eject-2.1.5-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
eject: eject (a tool to eject removable media)
eject:
eject: Eject allows removable media (typically a DVD, CD, floppy disk, tape,
eject: etc.) to be ejected under software control.  The command can also
eject: control some multi-disc changers, the auto-eject feature supported by
eject: some devices, and can close the disc tray of some drives.
eject:
eject: The 'eject' program was written by Jeff Tranter.
eject:
eject:
eject:

PACKAGE NAME:  etc-13.013-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  202 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
etc: etc (system configuration files)
etc:
etc: System configuration files.  The /etc directory is traditionally the
etc: location where configuration files are found.
etc:
etc:
etc:
etc:
etc:
etc:
etc:

PACKAGE NAME:  file-5.05-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  209 K
PACKAGE SIZE (uncompressed):  930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
file: file (a utility to determine file type)
file:
file: This is Ian F. Darwin's 'file' utility, used to identify files.
file: Christos Zoulas has been file's maintainer since 1994.
file:
file:
file:
file:
file:
file:
file:

PACKAGE NAME:  findutils-4.4.2-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  404 K
PACKAGE SIZE (uncompressed):  1510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
findutils: findutils (utilities to locate files)
findutils:
findutils: This package contains the GNU find and xargs programs.  The find and
findutils: xargs implementations comply with POSIX 1003.2.  They also support
findutils: some additional options, some borrowed from Unix and some unique to
findutils: GNU.
findutils:
findutils:
findutils:
findutils:
findutils:

PACKAGE NAME:  firmware-1.1-noarch-3vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  2461 K
PACKAGE SIZE (uncompressed):  10270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
firmware: A package of various firmware files from /lib/firmware
firmware:
firmware:

PACKAGE NAME:  floppy-5.4-x86_64-3.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  342 K
PACKAGE SIZE (uncompressed):  850 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
floppy: floppy (floppy disk utilities)
floppy:
floppy: Contains fdutils-5.4, tools to test and format floppy disks; and
floppy: mtools-3.9.8, a collection of utilities for using DOS/Windows floppy
floppy: disks with Linux.
floppy:
floppy:
floppy:
floppy:
floppy:
floppy:

PACKAGE NAME:  gawk-3.1.8-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  777 K
PACKAGE SIZE (uncompressed):  2300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gawk: gawk (pattern scanning and processing language)
gawk:
gawk: Gawk is the GNU Project's implementation of the AWK programming
gawk: language.  It conforms to the definition of the language in the POSIX
gawk: 1003.2 Command Language And Utilities Standard.  This version in turn
gawk: is based on the description in The AWK Programming Language, by Aho,
gawk: Kernighan, and Weinberger, with the additional features found in the
gawk: System V Release 4 version of UNIX awk.  Gawk also provides more
gawk: recent Bell Labs awk extensions, and some GNU-specific extensions.
gawk:
gawk:

PACKAGE NAME:  genpower-1.0.5-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
genpower: genpower (UPS monitoring daemon)
genpower:
genpower: The genpower daemon, genpowerd, will monitor the status of a serial
genpower: line connected to a UPS (Uninterruptible Power Supply).  If a power
genpower: failure is detected, genpowerd will notify the system to take the
genpower: needed steps to react to the condition of the UPS.  This may include
genpower: shutting the system down, or canceling a pending shutdown if the
genpower: power is restored.
genpower:
genpower:
genpower:

PACKAGE NAME:  gettext-0.18.1.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  110 K
PACKAGE SIZE (uncompressed):  800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gettext: gettext (internationalization framework)
gettext:
gettext: The GNU gettext package contains "gettext" and "ngettext", programs
gettext: that are used to internationalize the messages given by shell scripts.
gettext:
gettext:
gettext:
gettext:
gettext:
gettext:
gettext:

PACKAGE NAME:  glibc-solibs-2.13-x86_64-3.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  2380 K
PACKAGE SIZE (uncompressed):  11300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc-solibs: glibc-solibs (shared GNU C libraries)
glibc-solibs:
glibc-solibs: This package contains the shared libraries, binaries, and support
glibc-solibs: files required to run most Linux applications linked with glibc.
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:
glibc-solibs:

PACKAGE NAME:  glibc-zoneinfo-2.13-noarch-3.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  153 K
PACKAGE SIZE (uncompressed):  3170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc-zoneinfo: glibc-zoneinfo (timezone database)
glibc-zoneinfo:
glibc-zoneinfo: This package allows you to configure your time zone.
glibc-zoneinfo:
glibc-zoneinfo: This timezone database comes from the tzdata and tzcode packages by
glibc-zoneinfo: Arthur David Olson et.al.  The latest version and more information
glibc-zoneinfo: may be found at ftp://elsie.nci.nih.gov/pub/
glibc-zoneinfo:
glibc-zoneinfo: Use the timeconfig utility to set your local time zone.
glibc-zoneinfo:
glibc-zoneinfo:

PACKAGE NAME:  gpm-1.20.1-x86_64-5.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  186 K
PACKAGE SIZE (uncompressed):  610 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gpm: gpm (general purpose mouse server)
gpm:
gpm: The general purpose mouse server, or gpm, allows you to use the mouse
gpm: to cut and paste text from the screen.  It also acts as a mouse 
gpm: server for applications running on the Linux console, such as the
gpm: Midnight Commander file manager. 
gpm:
gpm: NOTE:  This program may cause problems when you start X on systems 
gpm: that do not use a serial mouse.  If you get an 'unable to open mouse 
gpm: device' error from X, disable /etc/rc.d/rc.gpm.
gpm:

PACKAGE NAME:  grep-2.7-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  237 K
PACKAGE SIZE (uncompressed):  960 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
grep: grep (print lines matching a pattern)
grep:
grep: This is GNU grep, the "fastest grep in the west" (we hope).  Grep
grep: searches through textual input for lines which contain a match to a
grep: specified pattern and then prints the matching lines.
grep:
grep:
grep:
grep:
grep:
grep:

PACKAGE NAME:  grub2-1.99~rc1-i586-2vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1544 K
PACKAGE SIZE (uncompressed):  6970 K
PACKAGE REQUIRED:  freetype >= 2.4.4-i586-1vl70,glibc-solibs >= 2.12.2-i486-1,lvm2 >= 2.02.81-i486-1,udev >= 165-i486-2,xz >= 5.0.0-i486-1,zlib >= 1.2.5-i486-3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
grub2: grub2 ()
grub2:
grub2: 
grub2: 
grub2: 
grub2:
grub2:
grub2: License: GPL
grub2: Authors: 
grub2: Website: 

PACKAGE NAME:  gzip-1.4-x86_64-1.tgz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  124 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gzip: gzip (file compression utility)
gzip:
gzip: Gzip reduces the size of the named files using Lempel-Ziv coding
gzip: (LZ77).  Whenever possible, each file is replaced by one with the
gzip: extension .gz, while keeping the same ownership modes, access and
gzip: modification times.
gzip:
gzip:
gzip:
gzip:
gzip:

PACKAGE NAME:  hdparm-9.37-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  62 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hdparm: hdparm (read/set hard drive parameters)
hdparm:
hdparm: hdparm provides a command line interface to various hard disk ioctls
hdparm: supported by the Linux ATA/IDE device driver subsystem.  This may be
hdparm: required to enable higher-performing disk modes.
hdparm:
hdparm: hdparm was written by Mark Lord.
hdparm:
hdparm:
hdparm:
hdparm:

PACKAGE NAME:  infozip-6.0-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  395 K
PACKAGE SIZE (uncompressed):  1280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
infozip: infozip (Info-ZIP's zip and unzip utilities)
infozip:
infozip: zip is a compression and file packaging utility for Unix, VMS, MSDOS,
infozip: OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS.
infozip: It is analogous to a combination of the UNIX commands tar(1) and
infozip: compress(1) and is compatible with PKZIP (Phil Katz's ZIP).  A
infozip: companion program (unzip(1L)), unpacks zip archives.
infozip:
infozip:
infozip:
infozip:

PACKAGE NAME:  inotify-tools-3.14-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
inotify-tools: inotify-tools (command line utilities for inotify)
inotify-tools:
inotify-tools: inotify-tools is a set of command-line programs for Linux providing a
inotify-tools: simple interface to inotify.  These programs can be used to monitor
inotify-tools: and act upon filesystem events.
inotify-tools:
inotify-tools: For more information see the inotifywait and inotifywatch man pages.
inotify-tools:
inotify-tools: inotify-tools home: http://inotify-tools.sourceforge.net/
inotify-tools:
inotify-tools:

PACKAGE NAME:  jfsutils-1.1.14-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  194 K
PACKAGE SIZE (uncompressed):  1140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
jfsutils: jfsutils (IBM JFS utilities)
jfsutils:
jfsutils: Utilities for managing IBM's Journaled File System (JFS) under Linux:
jfsutils:   jfs_debugfs - shell-type JFS file system editor.
jfsutils:   jfs_fsck - check and repair a JFS formatted device.
jfsutils:   jfs_fscklog - extract a JFS fsck service log into a file.
jfsutils:   jfs_logdump - dump a JFS formatted device's journal log.
jfsutils:   jfs_mkfs - create a JFS formatted partition.
jfsutils:   jfs_tune - adjust tunable file system parameters on JFS.
jfsutils:
jfsutils:

PACKAGE NAME:  kbd-1.15.2-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1072 K
PACKAGE SIZE (uncompressed):  3410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kbd: kbd (keyboard maps and console fonts)
kbd:
kbd: Load and save keyboard mappings.  Needed if you are not using the US
kbd: keyboard map.  This package also contains utilities to change your
kbd: console fonts - if you install it you'll get a menu later on that lets
kbd: you select from many different fonts.  If you like one, you can make
kbd: it your default font.  A new default font can be chosen at any time by
kbd: typing 'setconsolefont'.
kbd:
kbd:
kbd:

PACKAGE NAME:  kernel-3.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  531 K
PACKAGE SIZE (uncompressed):  3260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kernel: VectorLinux linux-3.0.4 kernel
kernel:
kernel: Built for Vectorlinux
kernel: based on the config-2.6.19.2-VLsleep
kernel: config by joe1962
kernel:
kernel:
kernel:
kernel:
kernel:
kernel: Package Created By: Uelsk8s

PACKAGE NAME:  kernel-modules-3.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  15383 K
PACKAGE SIZE (uncompressed):  78750 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kernel-modules: VectorLinux linux-3.0.4 kernel modules
kernel-modules:
kernel-modules: These are Linux kernel modules (device drivers)
kernel-modules: 
kernel-modules: config by joe1962 
kernel-modules: 
kernel-modules: 
kernel-modules:  
kernel-modules: 
kernel-modules: 
kernel-modules: built by Uelsk8s for Vectorlinux

PACKAGE NAME:  less-436-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  109 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
less: less (file pager)
less:
less: Less is a paginator similar to more (1), but which allows backward
less: movement in the file as well as forward movement. Also, less does not
less: have to read the entire input file before starting, so with large
less: input files it starts up faster than text editors like vi (1). 
less:
less: Less was written by Mark Nudelman.
less:
less:
less:

PACKAGE NAME:  lha-114i-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lha: lha (LHa archive utility)
lha:
lha: LHa is an archiving and compressing utility written by Tsugio Okamoto.
lha:
lha:
lha:
lha:
lha:
lha:
lha:
lha:

PACKAGE NAME:  libcgroup-0.37.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  96 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcgroup: libcgroup (library and utilities for kernel control groups)
libcgroup:
libcgroup: Control Groups provide a mechanism for aggregating/partitioning sets of
libcgroup: tasks, and all their future children, into hierarchical groups with
libcgroup: specialized behaviour.  It makes use of a filesystem interface.
libcgroup: This package contains a library for developing applications that use
libcgroup: control groups, as well as some basic userspace tools for controlling
libcgroup: and monitoring control groups.
libcgroup:
libcgroup: Homepage:  http://libcg.sourceforge.net/
libcgroup:

PACKAGE NAME:  lilo-22.8-x86_64-15.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  254 K
PACKAGE SIZE (uncompressed):  890 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lilo: lilo (Linux Loader)
lilo:
lilo: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger.
lilo: LILO boots Linux from your hard drive. It can also boot other
lilo: operating systems such as MS-DOS and OS/2, and can even boot DOS from
lilo: the second hard drive. LILO comes with utilities and documentation
lilo: that make it easier to install, such as 'liloconfig' and 'QuickStart'.
lilo: NOTE: Installing boot loaders is inherently dangerous. Be sure to have
lilo: some means to boot your system from a different media if you install
lilo: LILO on your hard disk.
lilo:

PACKAGE NAME:  logrotate-3.7.8-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  36 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
logrotate: logrotate (system log rotation tool)
logrotate:
logrotate: The logrotate utility is designed to simplify the administration
logrotate: of log files on a system which generates a lot of log files.
logrotate: Logrotate allows for the automatic rotation compression, removal
logrotate: and mailing of log files.  Logrotate can be set to handle a log
logrotate: file daily, weekly, monthly or when the log file gets to a certain
logrotate: size.  Normally, logrotate runs as a daily cron job.
logrotate:
logrotate:
logrotate:

PACKAGE NAME:  lvm2-2.02.84-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1290 K
PACKAGE SIZE (uncompressed):  8130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lvm2: lvm2 (Logical Volume Manager version 2)
lvm2:
lvm2: Heinz Mauelshagen's LVM (Logical Volume Manager) for Linux.
lvm2: LVM adds an additional layer between the physical peripherals and the
lvm2: low-level I/O interface to get a logical view of disks.  This allows
lvm2: the concatenation of several disks (so-called physical volumes or PVs)
lvm2: to form a storage pool (so-called Volume Group or VG) with allocation
lvm2: units called physical extents (called PE).  With LVM, you can extend,
lvm2: resize, or relocate storage dynamically.
lvm2:
lvm2:

PACKAGE NAME:  mingetty-1.08-x86_64-1vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mingetty: mingetty (small Linux console getty)
mingetty:
mingetty: Small Linux console getty that is started on the Linux text console, 
mingetty: asks for a login name and then tranfers over to /bin/login. 
mingetty: Is extended to allow automatic login and starting any app.
mingetty:
mingetty:
mingetty: License: GPL
mingetty: Authors: 
mingetty: Website: http://sourceforge.net/projects/mingetty 

PACKAGE NAME:  module-init-tools-3.12-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  389 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
module-init-tools: module-init-tools (kernel module utilities)
module-init-tools:
module-init-tools: Utilities to load and unload kernel modules.  These are used on Linux
module-init-tools: to load extra drivers or other features into the running kernel.
module-init-tools:
module-init-tools:
module-init-tools:
module-init-tools:
module-init-tools:
module-init-tools:
module-init-tools:

PACKAGE NAME:  mt-st-0.9b-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  29 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mt-st: mt-st (controls magnetic tape drive operation)
mt-st:
mt-st: This mt originates from BSD NET-2.  Some Linux SCSI tape-specific
mt-st: ioctls have been added to the original source and the man page has
mt-st: been updated.  Although this mt program is tailored for SCSI tape, it
mt-st: can also be used with the QIC-02 driver and hopefully with other Linux
mt-st: tape drivers using the same ioctls (some of the commands may not work
mt-st: with all drivers).
mt-st:
mt-st:
mt-st:

PACKAGE NAME:  mtx-1.3.12-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mtx: mtx (Controls tape autochangers)
mtx:
mtx: The MTX program controls the robotic mechanism in autoloaders and
mtx: tape libraries such as the HP SureStore DAT 40x6, Exabyte EZ-17, and
mtx: Exabyte 220. 
mtx:
mtx: This program is also reported to work with a variety of other tape
mtx: libraries and autochangers from Tandberg/Overland, Breece Hill, HP, 
mtx: Seagate, Dell and Quantum.
mtx:
mtx:

PACKAGE NAME:  ncompress-4.2.4.3-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ncompress: ncompress (the classic *nix compression utility)
ncompress:
ncompress: Compress reduces the size of the named files using adaptive Lempel-Ziv
ncompress: coding.  Whenever possible, each file is replaced by one with the
ncompress: extension .Z, while keeping the same ownership modes, access and
ncompress: modification times.  If no files are specified, the standard input is
ncompress: compressed to the standard output.  Compressed files can be restored
ncompress: to their original form using uncompress or zcat.
ncompress:
ncompress:
ncompress:

PACKAGE NAME:  ntfs-3g-2011.1.15-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  276 K
PACKAGE SIZE (uncompressed):  920 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ntfs-3g: ntfs-3g (NTFS read-write filesystem driver)
ntfs-3g:
ntfs-3g: The NTFS-3G driver is an open source, freely available NTFS driver
ntfs-3g: for Linux with read and write support.  It provides safe and fast
ntfs-3g: handling of the Windows XP, Windows Server 2003, Windows 2000 and
ntfs-3g: Windows Vista file systems.  Most POSIX file system operations are
ntfs-3g: supported, with the exception of full file ownership and access
ntfs-3g: rights support.
ntfs-3g:
ntfs-3g: Homepage for the ntfs-3g project: http://www.ntfs-3g.org
ntfs-3g:

PACKAGE NAME:  openssl-solibs-0.9.8r-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  720 K
PACKAGE SIZE (uncompressed):  2480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openssl-solibs: openssl-solibs (OpenSSL shared libraries)
openssl-solibs:
openssl-solibs: These shared libraries provide encryption routines required by
openssl-solibs: programs such as openssh.  They are also used by KDE's Konqueror web
openssl-solibs: browser to provide secure web connections.
openssl-solibs:
openssl-solibs: This product includes software developed by the OpenSSL Project for
openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
openssl-solibs: includes cryptographic software written by Eric Young
openssl-solibs: (eay@cryptsoft.com).  This product includes software written by Tim
openssl-solibs: Hudson (tjh@cryptsoft.com).

PACKAGE NAME:  os-prober-1.29-noarch-3vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  8 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  bash >= 3.1.017
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
os-prober: os-prober ( Scans system for present OSs )
os-prober:
os-prober: Utility borrowed from debian to scan the system for present
os-prober: Operating Systems. This version has been patched to recognize
os-prober: VectorLinux installations and identify them properly.
os-prober:
os-prober: Patched by : M0E-lnx
os-prober: WEBSITE: http://packages.debian.org/sid/i386/os-prober-udeb/download
os-prober: LICENSE: GNU GPL

PACKAGE NAME:  patch-2.6.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  89 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
patch: patch (apply a diff file to an original file or files)
patch:
patch: Patch is a utility used to apply diffs (or patches) to files, which
patch: are usually source code.
patch:
patch: Larry Wall wrote the original version of patch.  Paul Eggert removed
patch: patch's arbitrary limits; added support for binary files, setting
patch: file times, and deleting files; and made it conform better to POSIX.
patch: Other  contributors include Wayne Davison, who added unidiff support,
patch: and David MacKenzie, who added configuration and backup support.
patch:

PACKAGE NAME:  pciutils-3.1.7-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  241 K
PACKAGE SIZE (uncompressed):  1090 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pciutils: pciutils (PCI utilities)
pciutils:
pciutils: lspci displays detailed information about all PCI buses and devices
pciutils: in the system, replacing the original /proc/pci interface.
pciutils:
pciutils: setpci allows reading from and writing to PCI device configuration
pciutils: registers.  For example, you can adjust the latency timers with it.
pciutils:
pciutils: See the manual pages for more details.
pciutils:
pciutils:

PACKAGE NAME:  pcmciautils-017-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels)
pcmciautils:
pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs tools
pcmciautils: used with the 2.4.x Linux kernel.  PCMCIA cards are commonly used
pcmciautils: in laptops to provide expanded capabilities such as network
pcmciautils: connections, modems, increased memory, and more.
pcmciautils:
pcmciautils:
pcmciautils:
pcmciautils:
pcmciautils:

PACKAGE NAME:  pkgtools-tukaani-1.2.5-x86_64-1.tgz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  326 K
PACKAGE SIZE (uncompressed):  950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pkgtools-tukaani: pkgtools (Tukaani's Slackware compatible package maintenance system)
pkgtools-tukaani:
pkgtools-tukaani: pkgtools contains various utilities for managing Tukaani and
pkgtools-tukaani: Slackware packages, such as 'installpkg', 'removepkg', upgradepkg',
pkgtools-tukaani: 'makepkg', 'viewpkg' and 'explodepkg'. Also included are 'pkgtool',
pkgtools-tukaani: which is a powerful menu-based program for managing packages,
pkgtools-tukaani: 'makerepo' for creating package repositories for pkgtool, 'config-xwm'
pkgtools-tukaani: for selecting X11 window manager, and a few other scripts. This
pkgtools-tukaani: package includes 'dialog' and 'tar-1.13-pkgtools' binaries.
pkgtools-tukaani:
pkgtools-tukaani: http://tukaani.org/pkgtools/

PACKAGE NAME:  pm-utils-1.4.1-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  67 K
PACKAGE SIZE (uncompressed):  300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pm-utils: pm-utils (Power Management Utilities)
pm-utils:
pm-utils: The pm-utils package provides simple shell command line tools to
pm-utils: suspend and hibernate computers that can be used to run vendor or
pm-utils: distribution supplied scripts on suspend and resume.
pm-utils:
pm-utils: Homepage: http://pm-utils.freedesktop.org/
pm-utils:
pm-utils:
pm-utils:
pm-utils:

PACKAGE NAME:  procps-3.2.8-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  226 K
PACKAGE SIZE (uncompressed):  660 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
procps: procps (utilities for displaying process information)
procps:
procps: The procps package provides the classic set of utilities used to
procps: display information about the processes currently running on the 
procps: machine.
procps:
procps:
procps:
procps:
procps:
procps:

PACKAGE NAME:  quota-3.17-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  163 K
PACKAGE SIZE (uncompressed):  930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
quota: quota (Linux disk quota utilities)
quota:
quota: An implementation of the diskquota system for the Linux operating
quota: system to keep those greedy users from gobbling up 100% of the hard
quota: drive space.  Works with ext2, ext3, reiserfs, and xfs filesystems.
quota: This system is based on the Melbourne quota system by Robert Elz.
quota: Edvard Tuinder and Marco van Wieringen ported this code to Linux.
quota: Jan Kara added support for the new Linux quota format and the XFS
quota: filesystem.
quota:
quota:

PACKAGE NAME:  reiserfsprogs-3.6.21-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  219 K
PACKAGE SIZE (uncompressed):  1050 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
reiserfsprogs: reiserfsprogs (Reiserfs filesystem utilities)
reiserfsprogs:
reiserfsprogs: These utilities are used for Reiserfs.  Reiserfs is a file system
reiserfsprogs: based on balanced tree algorithms.  Learn more at the home site:
reiserfsprogs: http://www.namesys.com
reiserfsprogs:
reiserfsprogs: Reiserfs is the work of Hans Reiser and many others.  See the file
reiserfsprogs: /usr/doc/reiserfs*/README for full credits.
reiserfsprogs:
reiserfsprogs:
reiserfsprogs:

PACKAGE NAME:  rpm2tgz-1.2.2-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  5 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rpm2tgz: rpm2tgz (a tool for converting an RPM archive into a tar+gz one)
rpm2tgz:
rpm2tgz: Converts RPM format to Slackware's GNU tar + GNU zip format.  (view
rpm2tgz: converted packages with "less", install and remove with "installpkg",
rpm2tgz: "removepkg", "pkgtool", or manually with "tar").
rpm2tgz:
rpm2tgz: Converted packages come with no warranty.  ;-)
rpm2tgz:
rpm2tgz:
rpm2tgz:
rpm2tgz:

PACKAGE NAME:  sdparm-1.06-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sdparm: sdparm (fetch and change SCSI attributes)
sdparm:
sdparm: sdparm is a utility for listing and potentially changing SCSI disk
sdparm: parameters.  More generally it can be used on any device that uses
sdparm: a SCSI command set.  Apart from SCSI disks, examples of devices that
sdparm: use SCSI command sets are ATAPI CD/DVD drives, SCSI and ATAPI tape
sdparm: drives and SCSI enclosures.
sdparm:
sdparm: sdparm was written by Douglas Gilbert.
sdparm:
sdparm:

PACKAGE NAME:  sed-4.2.1-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  169 K
PACKAGE SIZE (uncompressed):  630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sed: sed (stream editor)
sed:
sed: This is the GNU version of sed, a stream editor.  A stream editor is
sed: used to perform basic text transformations on an input stream (a file
sed: or input from a pipeline).  It is sed's ability to filter text in a
sed: pipeline which distinguishes it from other types of editors.
sed:
sed: sed is a required package (it is needed by many system scripts).
sed:
sed:
sed:

PACKAGE NAME:  shadow-4.1.4.2-x86_64-3.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1168 K
PACKAGE SIZE (uncompressed):  4130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
shadow: shadow (shadow password suite)
shadow:
shadow: This set of login related programs utilizes an alternate, non-readable
shadow: file to contain the actual encrypted passwords.  This is presumed to 
shadow: increase system security by increasing the difficulty with which 
shadow: system crackers obtain encrypted passwords.  It was written by 
shadow: Julianne Frances Haugh and the Linux port is maintained by Tomasz
shadow: Kloczko.
shadow:
shadow: This package provides 'login', which is needed to log into the system.
shadow:

PACKAGE NAME:  sharutils-4.11-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  151 K
PACKAGE SIZE (uncompressed):  680 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sharutils: sharutils (GNU shell archive packing utilities)
sharutils:
sharutils: `shar' makes so-called shell archives out of many files, preparing
sharutils: them for transmission by electronic mail services.  `unshar' helps
sharutils: unpacking shell archives after reception.  `uuencode' prepares a file
sharutils: for transmission over an electronic channel which ignores or otherwise
sharutils: mangles the eight bit (high order bit) of bytes.  `uudecode' does the
sharutils: converse transformation.  `remsync' allows for remote synchronization
sharutils: of directory trees using electronic mail. 
sharutils:
sharutils:

PACKAGE NAME:  slapt-get-0.10.2h-x86_64-1vl60.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  165 K
PACKAGE SIZE (uncompressed):  1000 K
PACKAGE REQUIRED:  aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | curl >= 7.19.6-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | libidn >= 1.5-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | openldap-client >= 2.3.43-x86_64-1,aaa_elflibs-13.0-x86_64-2-upgraded >= 2011-02-12,03 | zlib >= 1.2.3-x86_64-2,cyrus-sasl >= 2.1.23-x86_64-1,glibc-solibs >= 2.9-x86_64-4vl70,gpgme >= 1.1.8-x86_64-1,libgpg-error >= 1.7-x86_64-1,openssl >= 0.9.8k-x86_64-2 | openssl-solibs >= 0.9.8k-x86_64-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slapt-get: Slapt-Get (Slackware APT Like System)
slapt-get:
slapt-get: Slapt-Get is  an APT like system for Slackware  package  management
slapt-get: It allows  one to search Slackware mirrors  and third party sources
slapt-get: for packages, compare  them  with  installed  packages, install new
slapt-get: packages, or upgrade all installed packages. slapt-get is great for
slapt-get: scripting as well.
slapt-get:
slapt-get:
slapt-get:
slapt-get:

PACKAGE NAME:  slocate-3.1-x86_64-3.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  27 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slocate: slocate (Secure Locate)
slocate:
slocate: Slocate is an enhanced version of locate, a command to help you locate
slocate: files on the system.  Like the original version of locate, Slocate
slocate: maintains a database of files on the system, updating it nightly.
slocate: Unlike the original, Slocate indexes every file on the machine rather
slocate: than only the ones that can be seen by everyone.  The "secure" part of
slocate: slocate is that it will only return matches if the user is allowed to
slocate: see the files.
slocate:
slocate:

PACKAGE NAME:  smartmontools-5.40-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  280 K
PACKAGE SIZE (uncompressed):  980 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
smartmontools: smartmontools (hard drive monitoring utilities)
smartmontools:
smartmontools: SMARTMONTOOLS contains utilities that control and monitor storage
smartmontools: devices using the Self-Monitoring, Analysis and Reporting Technology
smartmontools: (S.M.A.R.T.) system build into ATA and SCSI Hard Drives. This is used
smartmontools: to check the reliability of the hard drive and to predict drive
smartmontools: failures.  SMARTMONTOOLS Version 5.x is designed to comply to the
smartmontools: ATA/ATAPI-5 specification (Revision 1).  Future releases of
smartmontools: SMARTMONTOOLS (Versions 6.x and 7.x) will comply with the ATA/ATAPI-6
smartmontools: and ATA/ATAPI-7 specifications.
smartmontools:

PACKAGE NAME:  splitvt-1.6.5-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
splitvt: splitvt (run multiple shells in a single window)
splitvt:
splitvt: This program splits the screen into two windows, one above the other,
splitvt: and runs a shell in each one.
splitvt:
splitvt: Splitvt was written by Sam Lantinga.
splitvt:
splitvt:
splitvt:
splitvt:
splitvt:

PACKAGE NAME:  sysfsutils-2.1.0-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  38 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysfsutils: sysfsutils (Utilities for the sysfs filesystem)
sysfsutils:
sysfsutils: The purpose of this package is to provide a set of utilities for
sysfsutils: interfacing with sysfs, a virtual filesystem in Linux kernel versions
sysfsutils: 2.6+ that provides a tree of system devices.  While a filesystem is a
sysfsutils: very useful interface, a library (libsysfs) is also included that
sysfsutils: will hopefully make it easier for applications to query system
sysfsutils: devices and their attributes.
sysfsutils:
sysfsutils:
sysfsutils:

PACKAGE NAME:  sysklogd-1.5-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  60 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysklogd: sysklogd (Linux system logging utilities)
sysklogd:
sysklogd: Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd.
sysklogd:
sysklogd: This package contains a modified version of syslogd for the Linux
sysklogd: environment.  An additional utility, klogd, is included which allows
sysklogd: kernel logging to be directed through the syslogd facility.
sysklogd: Syslogd and klogd are started when your system boots.
sysklogd:
sysklogd:
sysklogd:

PACKAGE NAME:  syslinux-3.84-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  440 K
PACKAGE SIZE (uncompressed):  1540 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
syslinux: syslinux (SYSLINUX/PXELINUX/ISOLINUX boot loaders)
syslinux:
syslinux: SYSLINUX is a boot loader for the Linux operating system which
syslinux: operates off an MS-DOS/Windows FAT filesystem.  This is used by the
syslinux: Slackware makebootdisk script to create system boot floppies.
syslinux:
syslinux: Also included are PXELINUX and ISOLINUX, boot loaders for booting from
syslinux: a network server or CD-ROM.
syslinux:
syslinux: SYSLINUX, PXELINUX, and ISOLINUX were written by H. Peter Anvin.
syslinux:

PACKAGE NAME:  sysvinit-2.86-x86_64-6.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  59 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysvinit: sysvinit (init, the parent of all processes)
sysvinit:
sysvinit: System V style init programs by Miquel van Smoorenburg that control
sysvinit: the booting and shutdown of your system.  These support a number of
sysvinit: system runlevels, each with a specific set of utilities spawned.
sysvinit: For example, the normal system runlevel is 3, which starts agetty
sysvinit: on virtual consoles tty1 - tty6.  Runlevel 4 starts xdm.
sysvinit: Runlevel 0 shuts the system down.
sysvinit:
sysvinit:
sysvinit:

PACKAGE NAME:  sysvinit-functions-8.53-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  29 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysvinit-functions: sysvinit-functions (/etc/init.d/functions)
sysvinit-functions:
sysvinit-functions: This is the /etc/init.d/functions file, the typical sysvinit-style
sysvinit-functions: directories, and a few supporting binaries.  Using this system,
sysvinit-functions: subdirectories of /etc/rc.d/ are searched for scripts (which are
sysvinit-functions: usually symlinks to the script in /etc/init.d/ or /etc/rc.d/init.d/).
sysvinit-functions: The links must start with S to start a script or K to stop (kill) it.
sysvinit-functions:
sysvinit-functions: For the most part, these are useful for running software developed
sysvinit-functions: for other versions of Linux.
sysvinit-functions:

PACKAGE NAME:  tar-1.25-x86_64-1.tgz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1041 K
PACKAGE SIZE (uncompressed):  2510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tar: tar (archiving utility)
tar:
tar: This is the GNU version of tar, an archiving program designed to store
tar: and extract files from an archive file known as a tarfile.  A tarfile
tar: may be made on a tape drive, however, it is also common to write a
tar: tarfile to a normal file.
tar:
tar: Slackware's package system uses tarfiles compressed with GNU gzip.
tar:
tar:
tar:

PACKAGE NAME:  time-1.7-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
time: time (the GNU time command for measuring program resource use)
time:
time: The `time' command runs another program, then displays information
time: about the resources used by that program, collected by the system
time: while the program was running. 
time:
time: GNU time was originally written by David Keppel, with later versions
time: worked on by David MacKenzie, Arne Henrik Juul, and Francois Pinard.
time:
time:
time:

PACKAGE NAME:  tree-1.5.3-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tree: tree (a program to display a directory tree)
tree:
tree: Tree is a recursive directory listing program that produces a depth
tree: indented listing of files, which is colorized ala dircolors if the
tree: LS_COLORS environment variable is set and output is to tty.  With no
tree: arguments, tree lists the files in the current directory.
tree:
tree: The tree utility was written by Steve Baker.
tree:
tree:
tree:

PACKAGE NAME:  udev-165-x86_64-2.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  298 K
PACKAGE SIZE (uncompressed):  1720 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
udev: udev (dynamic device directory system)
udev:
udev: udev provides a dynamic device directory containing only the files
udev: for the devices which are actually present.  It creates or removes
udev: device node files usually located in the /dev directory.
udev:
udev: udev requires a 2.6 or newer kernel.
udev:
udev: Kay Sievers is the udev maintainer.
udev:
udev:

PACKAGE NAME:  unarj-265-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
unarj: unarj (a command-line utility for decompressing .arj archives)
unarj:
unarj: This is a simple command-line tool for decompressing .arj files.
unarj: Thanks to Haruhiko Okumura and ARJ Software, Inc. for providing this
unarj: source code free of charge.
unarj:
unarj: UNARJ software and manual copyright (c) 1990-2002 ARJ Software, Inc.
unarj: All rights reserved.
unarj:
unarj:
unarj:

PACKAGE NAME:  usb_modeswitch-1.1.6-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  52 K
PACKAGE SIZE (uncompressed):  320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
usb_modeswitch: usb_modeswitch (mode switching tool for multiple mode USB devices)
usb_modeswitch:
usb_modeswitch: USB-ModeSwitch is (surprise!) a small mode switching tool for
usb_modeswitch: controlling "flip flop" (multiple device) USB gear.  These devices
usb_modeswitch: initially appear to be USB storage, typically containing the MS
usb_modeswitch: Windows drivers for whatever the real purpose of the device is, such
usb_modeswitch: as a wireless USB modem.  To use these devices with Linux, they need
usb_modeswitch: to be told to switch out of storage mode, which is the purpose of the
usb_modeswitch: USB-ModeSwitch utility.
usb_modeswitch:
usb_modeswitch: Homepage: http://www.draisberghof.de/usb_modeswitch

PACKAGE NAME:  usbutils-002-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  180 K
PACKAGE SIZE (uncompressed):  630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
usbutils: usbutils (USB utilities)
usbutils:
usbutils: lsusb displays detailed information about all USB buses and devices
usbutils: in the system.
usbutils:
usbutils: usbmodules lists the kernel modules for a plugged in USB device.
usbutils:
usbutils: See the manual pages for more details.
usbutils:
usbutils:
usbutils:

PACKAGE NAME:  utempter-1.1.5-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
utempter: utempter (utmp updating library and utility)
utempter:
utempter: The utempter package provides a utility and shared library that
utempter: allows terminal applications such as xterm and screen to update
utempter: /var/run/utmp and /var/log/wtmp without requiring root privileges.
utempter:
utempter:
utempter:
utempter:
utempter:
utempter:

PACKAGE NAME:  util-linux-2.19-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  1457 K
PACKAGE SIZE (uncompressed):  6840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
util-linux: util-linux (a huge collection of essential utilities) 
util-linux:
util-linux: The util-linux package is a huge collection of random utilities
util-linux: that are essential to run a Linux system.
util-linux:
util-linux: http://kernel.org/~kzak/util-linux/
util-linux:
util-linux:
util-linux:
util-linux:
util-linux:

PACKAGE NAME:  vasm-7.0-noarch-1VL70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  350 K
PACKAGE SIZE (uncompressed):  1490 K
PACKAGE REQUIRED:  nmap >= 3.93,expect >= 5.43,bash >= 3.0,tclx >= 8.3,tcl >= 8.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vasm: vasm2 (VLocity Linux Configurators)
vasm: 
vasm: VASM Reloaded.
vasm: 
vasm: Author: VLocity Linux
vasm: License: GNU GPL
vasm: 

PACKAGE NAME:  vlart-6.0-noarch-1vl60.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  288 K
PACKAGE SIZE (uncompressed):  320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlart: VLART (Standard wallpapers and logos)
vlart: 
vlart: Backgrounds and Logo of Vector Linux.
vlart: 
vlart: Author: Vector Linux team
vlart: 

PACKAGE NAME:  vlconfig2-7.0-noarch-2VL70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  4496 K
PACKAGE SIZE (uncompressed):  12030 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:

PACKAGE NAME:  vlinit-6.0-noarch-4VL70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  58 K
PACKAGE SIZE (uncompressed):  320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlinit: VLocityLinux init files
vlinit: 
vlinit: packaged By Uelsk8s for VLocityLinux 

PACKAGE NAME:  which-2.20-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
which: which (shows the full path to shell commands)
which:
which: GNU 'which' takes one or more arguments.  For each of its arguments it
which: prints to stdout the full path of the executables that would have been
which: executed when this argument had been entered at the shell prompt.  It
which: does this by searching for an executable or script in the directories
which: listed in the environment variable PATH using the same algorithm as
which: bash(1).  'Which' is a built-in function in many shells.
which:
which: The GNU version of which was written by Carlo Wood.
which:

PACKAGE NAME:  xdelta-1.1.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  490 K
PACKAGE REQUIRED:  glib >= 1.2.10,glibc-solibs >= 2.13,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdelta: xdelta (A binary delta generator and an RCS replacement library)
xdelta:
xdelta: Xdelta provides the ability to generate deltas between a pair of
xdelta: files and later apply those deltas. It operates similar to the diff
xdelta: and patch commands, but works on binary files and does not produce a
xdelta: human readable output.
xdelta:
xdelta: License: GPL
xdelta: Authors: 
xdelta: Website: http://xdelta.googlecode.com/

PACKAGE NAME:  xfsprogs-3.1.3-x86_64-1.txz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  702 K
PACKAGE SIZE (uncompressed):  3600 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfsprogs: xfsprogs (tools to use the XFS filesystem)
xfsprogs:
xfsprogs: XFS is a high performance journaling filesystem which originated
xfsprogs: on the SGI IRIX platform.  It is completely multi-threaded, can
xfsprogs: support large files and large filesystems, extended attributes,
xfsprogs: variable block sizes, is extent based, and makes extensive use of
xfsprogs: Btrees (directories, extents, free space) to aid both performance
xfsprogs: and scalability.
xfsprogs:
xfsprogs:
xfsprogs:

PACKAGE NAME:  xz-5.0.0-x86_64-1.tgz
PACKAGE LOCATION:  ./a
PACKAGE SIZE (compressed):  290 K
PACKAGE SIZE (uncompressed):  900 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xz: xz (compression utility based on the LZMA algorithm)
xz:
xz: LZMA is a general purporse compression algorithm designed by Igor
xz: Pavlov as part of 7-Zip.  It provides high compression ratio while
xz: keeping the decompression speed fast.  XZ Utils are an attempt to make
xz: LZMA compression easy to use on free (as in freedom) operating
xz: systems.
xz:
xz: The people most responsible for xz are Igor Pavlov, Ville Koskinen,
xz: and Lasse Collin.  For more info:  http://tukaani.org/xz/
xz:

PACKAGE NAME:  a2ps-4.14-x86_64-5.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  731 K
PACKAGE SIZE (uncompressed):  4560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
a2ps: a2ps (any to PostScript filter)
a2ps:
a2ps: GNU a2ps is an Any to PostScript filter.  Of course it processes
a2ps: plain text files, but also pretty prints quite a few popular
a2ps: programming languages.  Also contained in this package is psutils, a
a2ps: collection of programs for manipulating PostScript files.
a2ps:
a2ps: a2ps is used by Apsfilter, so be sure to install this package if you
a2ps: plan to do any printing.
a2ps:
a2ps:

PACKAGE NAME:  acct-6.5.4-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  90 K
PACKAGE SIZE (uncompressed):  300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
acct: acct (process accounting utilities)
acct:
acct: This is a set of utilities which reports and summarizes data about
acct: user connect times and process execution statistics.  To activate
acct: process accounting, create the log file (touch /var/log/pacct), and
acct: then use the accton command to start it (accton /var/log/pacct).
acct: Be aware that the log file can grow to be quite large.
acct:
acct: The GNU process accounting utilities were written by Noel Cragg and
acct: the software is currently maintained by Ciaran O'Riordan,
acct: Manuel A. Fernandez Montecelo, and Tim Schmielau.

PACKAGE NAME:  alsa-utils-1.0.24.2-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  945 K
PACKAGE SIZE (uncompressed):  1980 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) 
alsa-utils:
alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-utils: functionality to the Linux operating system.  This package contains
alsa-utils: command line audio utilities for use with ALSA:
alsa-utils:   alsactl        (manage soundcard settings)
alsa-utils:   arecord/aplay  (capture and play audio)
alsa-utils:   amixer         (adjust mixer settings from the command line)
alsa-utils:   alsamixer      (an ncurses-based console mixer)
alsa-utils:
alsa-utils: For more information, see http://alsa-project.org

PACKAGE NAME:  at-3.1.12-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  40 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
at: at (delayed command execution)
at:
at: at and batch read shell commands from standard input (or a specified
at: file) storing them as a job to be scheduled for execution at a later
at: time.
at:
at: The 'at' command was written by David Parsons and Thomas Koenig.
at:
at:
at:
at:

PACKAGE NAME:  bc-1.06.95-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  99 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bc: bc (An arbitrary precision calculator language)
bc:
bc: bc is an arbitrary precision numeric processing language.  Syntax is
bc: similar to C, but differs in many substantial areas.  It supports
bc: interactive execution of statements.  bc is a utility included in the
bc: POSIX P1003.2/D11 draft standard.
bc:
bc: The GNU version of bc was written by Philip A. Nelson.
bc:
bc:
bc:

PACKAGE NAME:  bootsplash-3.2.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  70 K
PACKAGE SIZE (uncompressed):  390 K
PACKAGE REQUIRED:  freetype >= 2.4.4,glibc-solibs >= 2.13,lcms >= 1.19,libjpeg >= 8a | libjpeg >= v8a,libmng >= 1.0.10,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bootsplash: bootsplash (graphical boot process for the linux kernel)
bootsplash:
bootsplash: Linux graphical bootsplash allows you to use custom graphics during
bootsplash: early system startup. It makes it possible to place a nice graphic
bootsplash: behind or above the kernel boot messages. It hooks into the fbcon
bootsplash: layer and, if activated, searches the initial ramdisk for a JPEG
bootsplash: picture to show. On any output operations to the console, it takes
bootsplash: care of painting a margin around your text and a background picture
bootsplash: behind the text with a set of special cfb functions.
bootsplash:  
bootsplash:  

PACKAGE NAME:  cdparanoia-III_10.2-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdparanoia: cdparanoia (digital audio extraction tool)
cdparanoia:
cdparanoia: cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool,
cdparanoia: commonly known on the net as a 'ripper'.  It reads digital audio data
cdparanoia: from a Compact Disc and saves it to sound files.  cdparanoia has been
cdparanoia: designed to read correct audio data even using cheap CD-ROM drives
cdparanoia: prone to misalignment, frame jitter and loss of streaming.
cdparanoia: cdparanoia will also read and repair data from CDs that have been
cdparanoia: damaged in some way.
cdparanoia:
cdparanoia:

PACKAGE NAME:  cdrdao-1.2.3-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  281 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdrdao: cdrdao (CD burning utility)
cdrdao:
cdrdao: cdrdao burns proper disc-at-once (DAO) audio discs.  In DAO mode the
cdrdao: disc is written in one shot, so you don't have to have irritating 2
cdrdao: second gaps interrupting a live recording.
cdrdao:
cdrdao:
cdrdao:
cdrdao:
cdrdao:
cdrdao:

PACKAGE NAME:  cdrkit-1.1.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  742 K
PACKAGE SIZE (uncompressed):  3230 K
PACKAGE REQUIRED:  libcap >= 2.10,perl >= 5.10.0,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cdrkit: cdrkit (Tools for mastering and writing compact discs)
cdrkit:
cdrkit: cdrkit is a collection of CD/DVD utilities.
cdrkit:
cdrkit: icedax -- CD audio sampling utility.
cdrkit: wodim -- burn discs in most ATAPI and SCSI CD-R drives.
cdrkit: genisoimage  -- create ISO9660/HFS/Joliet CD-ROM images.
cdrkit:
cdrkit: http://cdrkit.org
cdrkit:
cdrkit: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  diffstat-1.53-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  21 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
diffstat: diffstat (produces statistics from diff output)
diffstat:
diffstat: DiffStat is a simple filter that reads the output of the 'diff'
diffstat: program and displays a histogram of insertions, deletions, and
diffstat: modifications per-file.  It is useful for reviewing large, complex
diffstat: patch files.
diffstat:
diffstat: Thomas E. Dickey is the author of DiffStat.
diffstat:
diffstat:
diffstat:

PACKAGE NAME:  diffutils-3.0-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  306 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
diffutils: diffutils (finds differences between files)
diffutils:
diffutils: The GNU diff utilities finds differences between files.  A major use
diffutils: for this package is to make source code patches.
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:
diffutils:

PACKAGE NAME:  dmapi-2.2.10-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dmapi: dmapi (Data Management API library)
dmapi:
dmapi: A library required to use the Data Management API (DMAPI).
dmapi: This interface is defined in the X/Open document 'Systems Management:
dmapi: Data Storage Managment (XDSM) API' dated February 1997.
dmapi:
dmapi: The DMAPI library is used by the xfsdump utility.
dmapi:
dmapi:
dmapi:
dmapi:

PACKAGE NAME:  dvd+rw-tools-7.1-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  102 K
PACKAGE SIZE (uncompressed):  360 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dvd+rw-tools: dvd+rw-tools (DVD+-RW tools)
dvd+rw-tools:
dvd+rw-tools: A collection of tools to master DVD+RW/+R/-R/-RW media.  For further
dvd+rw-tools: information see http://fy.chalmers.se/~appro/linux/DVD+RW/.
dvd+rw-tools:
dvd+rw-tools: The DVD+RW tools were written by Andy Polyakov.
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:
dvd+rw-tools:

PACKAGE NAME:  elinks-0.11.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  775 K
PACKAGE SIZE (uncompressed):  2860 K
PACKAGE REQUIRED:  bzip2 >= 1.0.6,expat >= 2.0.1,glibc-solibs >= 2.13,gmp >= 5.0.1,gpm >= 1.20.1,guile >= 1.8.8,less >= 436,libX11 >= 1.4.2,libXau >= 1.0.6,libXdmcp >= 1.1.0,libidn >= 1.19,libtool >= 2.4,libxcb >= 1.7,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,util-linux >= 2.19,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
elinks: elinks (ELinks - Full-Featured Text WWW Browser)
elinks: ELinks is an advanced and well-established feature-rich text mode 
elinks: web (HTTP/FTP/..) browser. ELinks can render both frames and tables, 
elinks: is highly customizable, and can be extended via Lua or Guile scripts.
elinks: It is very portable and runs on a variety of platforms.
elinks: 
elinks:
elinks:
elinks: License: GPL
elinks: Authors: http://elinks.or.cz
elinks: Website: http://elinks.or.cz

PACKAGE NAME:  enscript-1.6.5.2-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  361 K
PACKAGE SIZE (uncompressed):  2180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
enscript: enscript (converts text files to PostScript and other formats)
enscript:
enscript: Enscript converts text files to PostScript and spools the generated
enscript: output to a printer or saves it to a file.  If no input files are
enscript: given, enscript processes standard input.  Enscript can be extended to
enscript: handle different output media and it has many options for customizing
enscript: printouts.  
enscript:
enscript:
enscript:
enscript:

PACKAGE NAME:  flac-1.2.1-x86_64-3.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  782 K
PACKAGE SIZE (uncompressed):  3250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flac: flac (Free Lossless Audio Codec)
flac:
flac: FLAC stands for Free Lossless Audio Codec. Grossly oversimplified,
flac: FLAC is similar to MP3, but lossless.  "Free" means that the
flac: specification of the stream format is in the public domain, and that
flac: neither the FLAC format nor any of the implemented encoding/decoding
flac: methods are covered by any patent. It also means that the sources for
flac: libFLAC and libFLAC++ are available under the LGPL and the sources for
flac: flac, metaflac, and the plugins are available under the GPL.
flac:
flac: FLAC was developed by Josh Coalson.

PACKAGE NAME:  foomatic-filters-4.0.6-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  76 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
foomatic-filters: foomatic-filters (Universal print filter/RIP wrapper)
foomatic-filters:
foomatic-filters: foomatic-rip is a universal print filter, which is used by CUPS with
foomatic-filters: the gutenprint and hplip printer drivers.  It translates PostScript
foomatic-filters: (and also other file formats) to the printer's native language,
foomatic-filters: usually using Ghostscript (gs) as the external renderer.  The way
foomatic-filters: this translation is done is described in a PPD file.
foomatic-filters:
foomatic-filters: For more information on foomatic, see:  http://linuxprinting.org
foomatic-filters:
foomatic-filters:

PACKAGE NAME:  gambas2-runtime-2.22.0-x86_64-2vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  1662 K
PACKAGE SIZE (uncompressed):  5230 K
PACKAGE REQUIRED:  SDL >= 1.2.14,atk >= 1.32.0,bzip2 >= 1.0.6,cairo >= 1.10.2,curl >= 7.20.1,cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,cyrus-sasl >= 2.1.23,directfb >= 1.4.3,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,gcc >= 4.5.2,gdk-pixbuf2 >= 2.22.1,glib2 >= 2.28.3,glibc-solibs >= 2.13,gtk+2 >= 2.24.3,lcms >= 1.19,libICE >= 1.0.7,libSM >= 1.2.0,libX11 >= 1.4.2,libXau >= 1.0.6,libXcomposite >= 0.4.3,libXcursor >= 1.1.11,libXdamage >= 1.1.3,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 5.0,libXft >= 2.2.0,libXi >= 1.4.1,libXinerama >= 1.1.1,libXmu >= 1.1.0,libXrandr >= 1.3.1,libXrender >= 0.9.6,libXt >= 1.1.1,libXtst >= 1.2.0,libXxf86vm >= 1.1.1,libdrm >= 2.4.23,libffi >= 3.0.9,libidn >= 1.19,libjpeg >= 8a,libmng >= 1.0.10,libpng >= 1.4.5,librsvg >= 2.32.0,libtiff >= 3.9.4,libxcb >= 1.7,libxml2 >= 2.7.8,libxslt >= 1.1.26,mesa >= 7.9.2,openldap-client >= 2.4.23,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,pango >= 1.28.3,pcre >= 8.02,pixman >= 0.20.2,poppler >= 0.16.2,qt3 >= 3.3.8b,sqlite >= 3.7.3,svgalib >= 1.9.25,util-linux >= 2.19,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  mysql >= 5.0.24a-i486-1,sqlite >= 2.8.17-i586-4vl58,sqlite3 >= 3.4.1-i586-1vl58,postgresql >= 8.2.4-i586-1vl58,unixODBC >= 2.2.11-i586-4vl58,kdelibs >= 3.5.6-i586-2vl58
PACKAGE DESCRIPTION:
gambas2-runtime: Gambas 2 Runtime
gambas2-runtime: 
gambas2-runtime: This package provides the runtime environment for
gambas2-runtime: Gambas 2, so that you can execute Gambas 2 apps
gambas2-runtime: without needing to have the IDE installed.
gambas2-runtime: 
gambas2-runtime: Website: http://gambas.sourceforge.net
gambas2-runtime: License: GNU General Public License, version 2

PACKAGE NAME:  ghostscript-9.00-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  11859 K
PACKAGE SIZE (uncompressed):  50600 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ghostscript: ghostscript (GPL Ghostscript)
ghostscript:
ghostscript: GPL Ghostscript is an interpreter of Adobe Systems' PostScript(tm)
ghostscript: and Portable Document Format (PDF) languages.  Ghostscript is an
ghostscript: essential part of the printing subsystem, taking PostScript output
ghostscript: from applications and converting it into an appropriate printer or
ghostscript: display format.  Ghostscript supports many printers directly, and
ghostscript: more are supported through add-on packages.
ghostscript:
ghostscript:
ghostscript:

PACKAGE NAME:  ghostscript-fonts-std-8.11-noarch-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  3434 K
PACKAGE SIZE (uncompressed):  4830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ghostscript-fonts-std: ghostscript-fonts-std (fonts for the Ghostscript interpreter)
ghostscript-fonts-std:
ghostscript-fonts-std: These fonts are used by the GhostScript interpreter.
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:
ghostscript-fonts-std:

PACKAGE NAME:  groff-1.21-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  1838 K
PACKAGE SIZE (uncompressed):  8480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
groff: groff (document formatting system)
groff:
groff: The GNU groff package provides versions of troff, nroff, eqn, tbl, and 
groff: other Unix text-formatting utilities.  Groff is used to 'compile' man
groff: pages stored in groff/nroff format into a form which can be printed or
groff: displayed on the screen.  These man pages are stored in compressed
groff: form in the /usr/man/man? directories.
groff:
groff:
groff:
groff:

PACKAGE NAME:  gutenprint-5.2.6-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  2053 K
PACKAGE SIZE (uncompressed):  18150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gutenprint: gutenprint (IJS printer driver for Ghostscript and CUPS)
gutenprint:
gutenprint: Gutenprint (formerly named Gimp-Print) is a suite of printer drivers
gutenprint: that may be used with most common print spooling systems, including
gutenprint: CUPS, LPRng, or others.  These drivers provide high quality printing
gutenprint: in many cases equal to or better than proprietary vendor-supplied
gutenprint: drivers.  Gutenprint also includes an enhanced print plug-in for the
gutenprint: GIMP image editor.
gutenprint:
gutenprint:
gutenprint:

PACKAGE NAME:  hibernate-script-2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  65 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hibernate-script: hibernate-script (frontend to TuxOnIce hibernation engine)
hibernate-script:
hibernate-script: hibernate-script package contains a set of shell scripts to provide
hibernate-script: TuxOnIce hibernation engine functionality. It does all the work to 
hibernate-script: prepare the computer for hibernation. Scriptlet API allows to perform 
hibernate-script: some actions like unloading modules or shutting applications. This
hibernate-script: package is required to run TuxOnIce-patched kernel.
hibernate-script: License: GPL
hibernate-script: Authors: 
hibernate-script: Website: http://www.tuxonice.net

PACKAGE NAME:  hplip-3.11.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  12057 K
PACKAGE SIZE (uncompressed):  22390 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hplip: hplip (HP print/scan/fax support)
hplip:
hplip: HPLIP is an HP developed solution for printing, scanning, and faxing
hplip: with HP inkjet and laser based printers in Linux.  The HPLIP project
hplip: provides printing support for more than 1400 HP printer models,
hplip: including Deskjet, Officejet, Photosmart, PSC (Print Scan Copy),
hplip: Business Inkjet, LaserJet, and LaserJet MFP.
hplip:
hplip: For more information, see: http://hplipopensource.com
hplip:
hplip:

PACKAGE NAME:  icon-naming-utils-0.8.90-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
icon-naming-utils: icon-naming-utils (generate icon files for your DE)
icon-naming-utils:
icon-naming-utils: It is a script for maintaining backwards compatibility 
icon-naming-utils: with current desktop icon themes, while migrating to 
icon-naming-utils: the names specified in the Icon Naming Specification.
icon-naming-utils:
icon-naming-utils: Homepage: http://tango.freedesktop.org
icon-naming-utils:
icon-naming-utils:
icon-naming-utils:
icon-naming-utils:

PACKAGE NAME:  js-1.8.0_rc1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  549 K
PACKAGE SIZE (uncompressed):  3350 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
js: js (Mozilla's JavaScript Engine)
js:
js: Mozilla's JavaScript Engine, standalone version of the Firefox
js: javascript engine, aka SpiderMonkey
js: 
js:
js:
js: License: MPL
js: Authors: http://www.mozilla.org/js/spidermonkey
js: Website: http://www.mozilla.org/js/spidermonkey

PACKAGE NAME:  linuxdoc-tools-0.9.66-x86_64-8vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  4287 K
PACKAGE SIZE (uncompressed):  41990 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
linuxdoc-tools: linuxdoc-tools (utilities for working with DocBook and SGML)
linuxdoc-tools:
linuxdoc-tools: SGML stands for Standard Generalized Markup Language.  This is a
linuxdoc-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
linuxdoc-tools: and plain text (via groff) from a single source file in SGML.  It is
linuxdoc-tools: often used for technical software documentation, such as the Linux
linuxdoc-tools: HOWTO documents.  
linuxdoc-tools:
linuxdoc-tools: This package includes everything you need to use SGML -- all of the
linuxdoc-tools: standard SGML tools; OpenJade; tools for working with DocBook
linuxdoc-tools: documents (various DTDs); xmlto and AsciiDoc.

PACKAGE NAME:  lm_sensors-3.1.2-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  124 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lm_sensors: lm_sensors (hardware monitoring package)
lm_sensors:
lm_sensors: lm_sensors provides tools for monitoring the temperatures, voltages,
lm_sensors: and fans of Linux systems with hardware monitoring devices.  Included
lm_sensors: are text-based tools for sensor reporting, and a library for sensors
lm_sensors: access called libsensors.  It also contains tools for sensor hardware
lm_sensors: identification and I2C bus probing.
lm_sensors:
lm_sensors: IMPORTANT NOTE:  If you have a Thinkpad, please read the warnings in
lm_sensors: the README.thinkpad file.  lm_sensors has been known to cause damage
lm_sensors: to some Thinkpads.

PACKAGE NAME:  lsof-4.83-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  270 K
PACKAGE SIZE (uncompressed):  900 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lsof: lsof (list open files)
lsof:
lsof: Lsof is a Unix-specific tool.  Its name stands for "LiSt Open Files",
lsof: and it does just that.  It lists information about files that are open
lsof: by the processes running on the system.
lsof:
lsof: Victor A. Abell of Purdue University is the developer of lsof.
lsof:
lsof:
lsof:
lsof:

PACKAGE NAME:  man-1.6f-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  206 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
man: man (format and display the on-line manual pages)
man:
man: The man package is a collection of tools used for searching and
man: reading the online system documentation.  In fact, on most UNIX-like
man: operating systems it is the primary means of finding out how programs
man: on the system work.  For example, 'man man' will display the
man: documentation for man itself.
man:
man: Man requires the groff text processing package.
man:
man:

PACKAGE NAME:  man-pages-3.32-noarch-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  2442 K
PACKAGE SIZE (uncompressed):  5080 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
man-pages: man-pages (system documentation)
man-pages:
man-pages: Man pages are online documentation for Linux.  This package includes
man-pages: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux.
man-pages:
man-pages: The man-pages distribution is maintained by Michael Kerrisk with
man-pages: the help of more writers, editors, and other contributors than we
man-pages: can name here.
man-pages:
man-pages: For more information, see http://www.kernel.org/doc/man-pages/
man-pages:

PACKAGE NAME:  mc-4.7.5.1-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  1426 K
PACKAGE SIZE (uncompressed):  5560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mc: mc (Midnight Commander file manager)
mc:
mc: The Midnight Commander is a Norton Commander clone, a program that
mc: manipulates and manages files and directories.  Useful, fast, and has
mc: color displays on the Linux console.  Mouse support is provided
mc: through the gpm mouse server.  This is a lightweight compilation of
mc: mc for use on the text console or in an xterm.
mc:
mc: mc was written by Miguel de Icaza and Mauricio Plaza.
mc:
mc:

PACKAGE NAME:  mpg123-1.13.2-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  237 K
PACKAGE SIZE (uncompressed):  750 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mpg123: mpg123 (a command-line mp3 player)
mpg123:
mpg123: mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for 
mpg123: layers 1, 2, and 3 (MPEG 1.0 layer 3 aka MP3 most commonly tested). 
mpg123:
mpg123: It is free software licensed under LGPL 2.1.
mpg123:
mpg123: Homepage: http://mpg123.org/
mpg123:
mpg123:
mpg123:

PACKAGE NAME:  nano-2.3.0-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  383 K
PACKAGE SIZE (uncompressed):  1780 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nano: nano (Nano's ANOther editor, an enhanced free Pico clone)
nano:
nano: nano is a small, free, and friendly editor from the GNU project.  It
nano: aims to copy Pico's look and feel while providing additional (or
nano: disabled by default) features that are missing from Pico, such as
nano: "search and replace" or "go to line and column number".
nano:
nano: Chris Allegretta is Nano's author.
nano:
nano:
nano:

PACKAGE NAME:  openrdate-1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openrdate: openrdate (date/time printing/setting program)
openrdate:
openrdate: Good-old rdate date- and time-setting software implementing RFC
openrdate: 868 (inetd time) and RFC 2030 (SNTP/NTP) protocols. An independent
openrdate: package of the OpenBSD's rdate program.
openrdate:
openrdate: Homepage: http://sourceforge.net/projects/openrdate/
openrdate:
openrdate:
openrdate:
openrdate:

PACKAGE NAME:  pstoedit-3.50-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  411 K
PACKAGE SIZE (uncompressed):  1930 K
PACKAGE REQUIRED:  imagemagick >= 6.4.9.2,gd >= 2.0.35,ghostscript >= 8.64,libemf >= 1.0.3,libpng >= 1.2.34,plotutils >= 2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pstoedit: pstoedit (Translates PS and PDF graphics into other vector formats)
pstoedit:
pstoedit: Pstoedit converts PostScript and PDF files to various vector graphic
pstoedit: formats. The resulting files can be edited or imported into various
pstoedit: drawing packages. Pstoedit comes with a large set of integrated
pstoedit: format drivers.
pstoedit:
pstoedit: http://www.pstoedit.net/
pstoedit:
pstoedit:
pstoedit: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  python-lxml-2.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  1662 K
PACKAGE SIZE (uncompressed):  23790 K
PACKAGE REQUIRED:  libxslt >= 1.1.24,python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python-lxml: python-lxml (ElementTree-like Python bindings for libxml2 and libxslt)
python-lxml:
python-lxml: lxml provides a Python binding to the libxslt and libxml2 libraries.
python-lxml: It follows the ElementTree API as much as possible in order to provide
python-lxml: a more Pythonic interface to libxml2 and libxslt than the default
python-lxml: bindings.  In particular, lxml deals with Python Unicode strings
python-lxml: rather than encoded UTF-8 and handles memory management automatically,
python-lxml: unlike the default bindings.
python-lxml:
python-lxml: http://codespeak.net/lxml/
python-lxml: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  rpm-4.8.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  763 K
PACKAGE SIZE (uncompressed):  3150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rpm: rpm (RPM package format tool)
rpm:
rpm: RPM is a tool from Red Hat Software used to install and remove
rpm: packages in the .rpm format.  When installing RPM packages on
rpm: Slackware, you may need to use the --nodeps and --force options.
rpm: Before installing any binary package, it's wise to examine it to
rpm: see what it's going to do, and if it will overwrite any files.  You
rpm: can use rpm2tgz to convert .rpm packages to .tgz packages so you
rpm: can look them over.
rpm:
rpm:

PACKAGE NAME:  screen-4.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  474 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13,ncurses >= 5.8,utempter >= 1.1.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
screen: screen (screen manager with VT100/ANSI terminal emulation)
screen:
screen: Screen is a full-screen window manager that multiplexes a physical
screen: terminal between several processes (typically interactive shells).
screen: Each virtual terminal provides the functions of a DEC VT100 terminal
screen: and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64)
screen: and ISO 2022 standards (e.g. insert/delete line and support for
screen: multiple character sets). 
screen: Website: http://www.gnu.org/software/screen/
screen: Author: <screen-devel@gnu.org>. 
screen: License: GNU GPL

PACKAGE NAME:  sg3_utils-1.31-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  497 K
PACKAGE SIZE (uncompressed):  1600 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sg3_utils: sg3_utils (Utilities for devices that use SCSI command sets)
sg3_utils:
sg3_utils: Collection of Linux utilities for devices that use the SCSI command
sg3_utils: set.
sg3_utils: Includes utilities to copy data based on "dd" syntax and semantics
sg3_utils: (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages
sg3_utils: (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs);
sg3_utils: spin up and down disks (sg_start); do self tests (sg_senddiag); and
sg3_utils: various other functions.
sg3_utils: http://sg.danny.cz/sg/sg3_utils.html
sg3_utils: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  sox-14.3.1-x86_64-2.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  358 K
PACKAGE SIZE (uncompressed):  930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sox: sox (universal sound sample translator)
sox:
sox: Sox is a universal sound converter, player, and recorder.  It can
sox: play, record, and convert between several sound file formats such as
sox: .au, .snd, .voc and .wav.
sox:
sox:
sox:
sox:
sox:
sox:

PACKAGE NAME:  sqlite-3.7.3-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  367 K
PACKAGE SIZE (uncompressed):  1030 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sqlite: SQLite (simple, self contained database engine)
sqlite:
sqlite: SQLite is a small C library that implements a self-contained,
sqlite: embeddable, zero-configuration SQL database engine.
sqlite:
sqlite: The SQLite distribution comes with a standalone command-line access
sqlite: program (sqlite) that can be used to administer an SQLite database
sqlite: and which serves as an example of how to use the SQLite library.
sqlite:
sqlite: Homepage:  http://www.sqlite.org/
sqlite:

PACKAGE NAME:  sudo-1.7.4p6-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  166 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sudo: sudo (give limited root privileges to certain users)
sudo:
sudo: 'sudo' is a command that allows users to execute some commands as 
sudo: root.  The /etc/sudoers file (edited with 'visudo') specifies which
sudo: users have access to sudo and which commands they can run.  'sudo' 
sudo: logs all its activities to /var/log/ so the system administrator
sudo: can keep an eye on things.
sudo:
sudo:
sudo:
sudo:

PACKAGE NAME:  sysstat-9.0.6.1-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  180 K
PACKAGE SIZE (uncompressed):  820 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sysstat: sysstat (System performance monitoring tools)
sysstat:
sysstat: The sysstat utilities are a collection of performance monitoring
sysstat: tools for Linux.  These include the iostat, mpstat, pidstat, sadf,
sysstat: and sar tools.
sysstat:
sysstat: The sysstat utilities were written by Sebastien Godard.
sysstat:
sysstat: For more information, see the sysstat web site:
sysstat:   http://pagesperso-orange.fr/sebastien.godard/
sysstat:

PACKAGE NAME:  texinfo-4.13a-x86_64-4.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  743 K
PACKAGE SIZE (uncompressed):  2400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
texinfo: texinfo (GNU software documentation system)
texinfo:
texinfo: 'Texinfo' is a documentation system that uses a single source file to
texinfo: produce both on-line information and printed output.  Using Texinfo,
texinfo: you can create a printed document with the normal features of a book,
texinfo: including chapters, sections, cross references, and indices.  From the
texinfo: same Texinfo source file, you can create a menu-driven, on-line Info
texinfo: file with nodes, menus, cross references, and indices.
texinfo:
texinfo: This package is needed to read the documentation files in /usr/info.
texinfo:

PACKAGE NAME:  unrar-3.8.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  86 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,gcc >= 4.5.2-x86_64-2,glibc-solibs >= 2.13-x86_64-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
unrar: unrar (unpacker for the RAR archive format)
unrar:
unrar: WinRAR is a powerful archive manager. Unrar is an opensource subset
unrar: of RAR from rarlab that can uncompress RAR images.
unrar:
unrar: unrar home: http://www.rarlab.com/rar_add.htm
unrar:
unrar:
unrar:
unrar:
unrar:

PACKAGE NAME:  vim-7.3.138-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  6421 K
PACKAGE SIZE (uncompressed):  28120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vim: vim (Vi IMproved)
vim:
vim: Vim is an almost compatible version of the UNIX editor vi.  Many new
vim: features have been added:  multi level undo, command line history, 
vim: filename completion, block operations, and more.
vim:
vim: Vim's development is led by Bram Moolenaar.
vim:
vim: This package also contains the Exuberant Ctags program
vim: written by Darren Hiebert.
vim:

PACKAGE NAME:  vorbis-tools-1.4.0-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  172 K
PACKAGE SIZE (uncompressed):  800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vorbis-tools: vorbis-tools (Ogg Vorbis Tools)
vorbis-tools:
vorbis-tools: The vorbis-tools package contains several basic tools for working with
vorbis-tools: compressed audio files in the Ogg Vorbis (.ogg) format:
vorbis-tools:
vorbis-tools:   oggenc (an .ogg encoder), ogg123 (a playback tool), vorbiscomment
vorbis-tools:   (add comments to vorbis files), ogginfo (show information about an
vorbis-tools:   ogg file), oggdec (a command line decoder), and vcut (a tool for
vorbis-tools:   splitting vorbis files).
vorbis-tools:
vorbis-tools: These tools require the libao, libogg, and libvorbis libraries.

PACKAGE NAME:  wvdial-1.61-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  310 K
PACKAGE REQUIRED:  libwvstreams >= 4.6.1,lockdev >= 1.0.1,ppp >= 2.4.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wvdial: wvdial (A heuristic autodialer for PPP connections)
wvdial:
wvdial: WvDial automatically locates and configures modems and can log into
wvdial: almost any ISP's server without special configuration. You need to
wvdial: input the username, password, and phone number, and then WvDial will
wvdial: negotiate the PPP connection using any mechanism needed.
wvdial:
wvdial: http://alumnit.ca/wiki/?WvStreams
wvdial:
wvdial:
wvdial: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  xfsdump-3.0.4-x86_64-1.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  292 K
PACKAGE SIZE (uncompressed):  870 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfsdump: xfsdump (backup tools for the XFS filesystem)
xfsdump:
xfsdump: The xfsdump package contains the xfsdump and xfsrestore utilities for
xfsdump: backing up and restoring XFS partitions.  xfsdump examines files in a
xfsdump: filesystem, determines which need to be backed up, and copies those
xfsdump: files to a specified disk, tape or other storage medium.  xfsrestore
xfsdump: performs the inverse function of xfsdump; it can restore a full
xfsdump: or incremental backup of a filesystem.
xfsdump:
xfsdump:
xfsdump:

PACKAGE NAME:  zsh-4.3.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./ap
PACKAGE SIZE (compressed):  1579 K
PACKAGE SIZE (uncompressed):  5390 K
PACKAGE REQUIRED:  gdbm >= 1.8.3,glibc-solibs >= 2.13,ncurses >= 5.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
zsh: zsh (the Z shell)
zsh: Zsh is a UNIX command interpreter (shell) which of the standard shells
zsh: most resembles the Korn shell (ksh), although it is not completely
zsh: compatible.  It includes enhancements of many types, notably in the
zsh: command-line editor, options for customizing its behavior, filename
zsh: globbing, features to make C-shell (csh) users feel more at home and
zsh: extra features drawn from tcsh (another 'custom' shell).  Zsh was 
zsh: written by Paul Falstad.
zsh: License: GPL
zsh: Authors: Paul Falstad
zsh: Website: http://www.zsh.org

PACKAGE NAME:  arch-makepkg-3.4.0-noarch-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
arch-makepkg: arch linux package builder adapted for VL with abs & fakeroot
arch-makepkg: 
arch-makepkg: Gives a fake root environment, useful for building packages as a non
arch-makepkg: -privileged user 
arch-makepkg: 
arch-makepkg: 
arch-makepkg: 
arch-makepkg: 
arch-makepkg: License: GPL
arch-makepkg: Authors: 
arch-makepkg: Website: http://packages.debian.org/fakeroot 

PACKAGE NAME:  autoconf-2.13-x86_64-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  204 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  perl >= 5.12.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
autoconf: autoconf (generate configuration scripts)
autoconf:
autoconf: GNU autoconf is an extensible package of m4 macros that produce shell
autoconf: scripts to automatically configure software source code packages.
autoconf: These scripts can adapt the packages to many kinds of UNIX-like
autoconf: systems without manual user intervention.  Autoconf creates a
autoconf: configuration script for a package from a template file that lists the
autoconf: operating system features that the package can use, in the form of m4
autoconf: macro calls.  You must install the "m4" package to be able to use
autoconf: autoconf.
autoconf:

PACKAGE NAME:  autoconf-2.65-noarch-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  594 K
PACKAGE SIZE (uncompressed):  2200 K
PACKAGE REQUIRED:  m4 >= 1.4.7
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
autoconf: autoconf (Generate configuration scripts)
autoconf:
autoconf: GNU autoconf is an extensible package of m4 macros that produce shell
autoconf: scripts to automatically configure software source code packages.
autoconf: These scripts can adapt the packages to many kinds of UNIX-like
autoconf: systems without manual user intervention. Autoconf creates a
autoconf: configuration script for a package from a template file that lists the
autoconf: operating system features that the package can use, in the form of m4
autoconf: macro calls. You must install the "m4" package to be able to use
autoconf: autoconf.                    http://www.gnu.org/software/autoconf/
autoconf: Packager: vl70@vector.Linux.net on 16-Jan-2011

PACKAGE NAME:  automake-1.11.1-noarch-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  559 K
PACKAGE SIZE (uncompressed):  1710 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
automake: automake (a Makefile generator)
automake:
automake: This is Automake, a Makefile generator.  It was inspired by the 4.4BSD
automake: make and include files, but aims to be portable and to conform to the
automake: GNU standards for Makefile variables and targets.  Automake is a Perl
automake: script.  The input files are called Makefile.am.  The output files are
automake: called Makefile.in; they are intended for use with Autoconf.  Automake
automake: requires certain things to be done in your configure.in.  You must
automake: install the "m4" and "perl" packages to be able to use automake.
automake:
automake:

PACKAGE NAME:  binutils-2.21.51.0.6-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  3196 K
PACKAGE SIZE (uncompressed):  16370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
binutils: binutils (GNU binary development tools)
binutils:
binutils: Binutils is a collection of binary utilities.  It includes "as" (the 
binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities
binutils: for creating and working with binary programs.
binutils:
binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran,
binutils: and most other programming languages.
binutils:
binutils:
binutils:

PACKAGE NAME:  bison-2.4.3-x86_64-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  424 K
PACKAGE SIZE (uncompressed):  1490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bison: bison (parser generator similar to yacc)
bison:
bison: GNU "Bison" is a general-purpose parser generator that converts a
bison: grammar description for an LALR(1) context-free grammar into a C
bison: program to parse that grammar.
bison:
bison: Bison is upward compatible with Yacc:  all properly-written Yacc
bison: grammars ought to work with Bison with no change.  Anyone familiar
bison: with Yacc should be able to use Bison with little trouble.
bison:
bison:

PACKAGE NAME:  ccache-3.1.4-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  73 K
PACKAGE SIZE (uncompressed):  210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ccache: ccache (a fast compiler cache)
ccache:
ccache: ccache is a compiler cache. It speeds up re-compilation of C/C++ code
ccache: by caching previous compiles and detecting when the same compile is
ccache: being done again.
ccache:
ccache: ccache was written by Andrew Tridgell.
ccache:
ccache:
ccache:
ccache:

PACKAGE NAME:  cmake-2.8.4-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  4699 K
PACKAGE SIZE (uncompressed):  36040 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cmake: CMake (cross-platform, open-source make system)
cmake:
cmake: CMake is used to control the software process using simple platform
cmake: and compiler independed configuration files. CMake generates
cmake: native makefiles and workspaces that can be used in the
cmake: compiler environment of your choice.
cmake:
cmake: CMake's home on the web is:  http://www.cmake.org
cmake:
cmake:
cmake:

PACKAGE NAME:  cvs-1.11.23-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  838 K
PACKAGE SIZE (uncompressed):  1560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cvs: cvs (Concurrent Versions System)
cvs:
cvs: CVS is a version control system, which allows you to keep old versions
cvs: of files (usually source code), keep a log of who, when, and why
cvs: changes occurred, etc., like RCS or SCCS.  It handles multiple
cvs: developers, multiple directories, triggers to enable/log/control
cvs: various operations, and can work over a wide area network.
cvs:
cvs: Some of the people who have worked on CVS include:  Dick Grune,
cvs: Brian Berliner, Jeff Polk, and others too numerous to mention.
cvs:

PACKAGE NAME:  doxygen-1.7.3-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  2941 K
PACKAGE SIZE (uncompressed):  10580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
doxygen: doxygen (documentation generator)
doxygen:
doxygen: Doxygen is a documentation system for C++, C, Java, IDL, and to some
doxygen: extent PHP and C#.  Doxygen generates project documentation using
doxygen: special documentation blocks in the source code, easing the process of
doxygen: keeping docs and code in sync.  Doxygen produces documentation in
doxygen: several output formats, including HTML, LaTeX, man pages, RTF, XML,
doxygen: compressed HTML, PostScript, and PDF.
doxygen:
doxygen:
doxygen:

PACKAGE NAME:  flex-2.5.35-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  263 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flex: flex (fast lexical analyzer generator)
flex:
flex: flex is a tool for generating programs that perform pattern matching
flex: on text.  flex is a rewrite of the AT&T Unix lex tool (the two
flex: implementations do not share any code, though), with some extensions
flex: (and incompatibilities).
flex:
flex:
flex:
flex:
flex:

PACKAGE NAME:  gcc-4.5.2-x86_64-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  11106 K
PACKAGE SIZE (uncompressed):  38050 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gcc: gcc (Base GCC package with C support)
gcc:
gcc: GCC is the GNU Compiler Collection.
gcc:
gcc: This package contains those parts of the compiler collection needed to
gcc: compile C code.  Other packages add C++, Fortran, Objective-C, and
gcc: Java support to the compiler core.
gcc:
gcc:
gcc:
gcc:

PACKAGE NAME:  gcc-g++-4.5.2-x86_64-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  4941 K
PACKAGE SIZE (uncompressed):  22920 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gcc-g++: gcc-g++ (C++ for GCC)
gcc-g++:
gcc-g++: C++ support for the GNU Compiler Collection.
gcc-g++:
gcc-g++: This package contains those parts of the compiler collection needed to
gcc-g++: compile C++ code.  The base gcc package is also required.
gcc-g++:
gcc-g++:
gcc-g++:
gcc-g++:
gcc-g++:

PACKAGE NAME:  gdb-7.2-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  2341 K
PACKAGE SIZE (uncompressed):  6930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gdb: gdb (the GNU symbolic debugger)
gdb: GDB, the GNU Project debugger, allows you to see what is going on 
gdb: inside another program while it executes -- or what another program
gdb: was doing at the moment it crashed.  GDB can do four main kinds of
gdb: things to help you catch bugs in the act:   1) Start your program,
gdb: specifying anything that might affect its behavior.  2) Make your
gdb: program stop on specified conditions.  3) Examine what has happened,
gdb: when your program has stopped.  4) Change things in your program, so
gdb: you can experiment with correcting the effects of one bug and go on
gdb: to learn about another.  The program being debugged can be written in
gdb: Ada, C, C++, Objective-C, Pascal and many other languages.

PACKAGE NAME:  gdbm-1.8.3-x86_64-4.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gdbm: gdbm (GNU database routines)
gdbm:
gdbm: GNU dbm is a set of database routines that work similar to the
gdbm: standard UNIX dbm routines.
gdbm:
gdbm:
gdbm:
gdbm:
gdbm:
gdbm:
gdbm:

PACKAGE NAME:  gettext-tools-0.18.1.1-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  2416 K
PACKAGE SIZE (uncompressed):  8830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gettext-tools: gettext-tools (internationalization framework tools)
gettext-tools:
gettext-tools: The GNU gettext-tools package is useful for authors and maintainers of
gettext-tools: internationalized software, or for anyone compiling programs that
gettext-tools: use the gettext functions.  This package provides the needed tools and
gettext-tools: library functions for the handling of messages in different languages.
gettext-tools: Some other GNU packages use the gettext program (included in this
gettext-tools: package) to internationalize the messages given by shell scripts.
gettext-tools:
gettext-tools:
gettext-tools:

PACKAGE NAME:  git-1.7.4.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  2651 K
PACKAGE SIZE (uncompressed):  12230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
git: git (the stupid content tracker)
git:
git: Git is a fast, scalable, distributed revision control system with an
git: unusually rich command set that provides both high-level operations
git: and full access to internals.
git:
git: "git" can mean anything, depending on your mood.
git:
git: Git was originally written by Linus Torvalds and is currently
git: maintained by Junio C. Hamano.
git:

PACKAGE NAME:  gperf-3.0.4-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  96 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gperf: gperf (a perfect hash function generator)
gperf:
gperf: gperf is a perfect hash function generator written in C++.
gperf: It transforms an n element user-specified keyword set W into a
gperf: perfect hash function F.  gperf currently generates the reserved
gperf: keyword recognizer for lexical analyzers in several production and
gperf: research compilers and language processing tools, including GNU C,
gperf: GNU C++, GNU Java, GNU Pascal, GNU Modula 3, and GNU indent.
gperf:
gperf: gperf was written by by Douglas C. Schmidt and Bruno Haible.
gperf:

PACKAGE NAME:  guile-1.8.8-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  1510 K
PACKAGE SIZE (uncompressed):  6270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
guile: guile (GNU's extension language library)
guile:
guile: This is Guile, Project GNU's extension language library.  Guile is an
guile: interpreter for Scheme, packaged as a library that you can link into
guile: your applications to give them their own scripting language.  Guile
guile: will eventually support other languages as well, giving users of
guile: Guile-based applications a choice of languages.
guile:
guile:
guile:
guile:

PACKAGE NAME:  intltool-0.41.1-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
intltool: intltool (Utilities for translation support)
intltool:
intltool: This package contains scripts and autoconf files for
intltool: internationalizing data.
intltool:
intltool:
intltool:
intltool:
intltool:
intltool:
intltool:

PACKAGE NAME:  kernel-headers-2.6.37.4-x86-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  545 K
PACKAGE SIZE (uncompressed):  2880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kernel-headers: kernel-headers (Linux kernel include files)
kernel-headers:
kernel-headers: These are the include files from the Linux kernel.
kernel-headers:
kernel-headers: You'll need these to compile most system software for Linux.
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:
kernel-headers:

PACKAGE NAME:  kernel-stripped-src-3.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  10327 K
PACKAGE SIZE (uncompressed):  82570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kernel-src: VectorLinux linux-3.0.4 kernel source
kernel-src: stripped kernel source
kernel-src: Built for Vectorlinux
kernel-src: This is a stripped down kernel source 
kernel-src: tree. It is INCOMPLETE!
kernel-src: It's used if you build a kernel modules
kernel-src: for your devices, but it can't be used 
kernel-src: to build completely new kernel.
kernel-src: based on the config-2.6.19.2-VLsleep
kernel-src: by joe1962
kernel-src: Package Created By: Uel Archuletta

PACKAGE NAME:  libtool-2.4-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  402 K
PACKAGE SIZE (uncompressed):  2240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtool: libtool (a generic library support script)
libtool:
libtool: This is GNU Libtool, a generic library support script. Libtool hides
libtool: the complexity of using shared libraries behind a consistent, portable
libtool: interface.  To use libtool, add the new generic library building
libtool: commands to your Makefile, Makefile.in, or Makefile.am.  See the
libtool: documentation for details.
libtool:
libtool: You must install the "m4" package to be able to use libtool.
libtool:
libtool:

PACKAGE NAME:  lua-5.1.4-x86_64-3vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  478 K
PACKAGE SIZE (uncompressed):  1000 K
PACKAGE REQUIRED:  ncurses >= 5.6,readline >= 6.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lua: lua (Powerful light-weight programming language)
lua:
lua: Lua is a powerful light-weight programming language designed for
lua: extending applications. Lua is also frequently used as a
lua: general-purpose, stand-alone language. Lua is free software.
lua: Lua combines simple procedural syntax with powerful data description
lua: constructs based on associative arrays and extensible semantics. Lua
lua: is dynamically typed, interpreted from bytecodes, and has automatic
lua: memory management with garbage collection, making it ideal for
lua: configuration, scripting, and rapid prototyping.
lua: http://www.lua.org/             Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  m4-1.4.16-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  214 K
PACKAGE SIZE (uncompressed):  510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
m4: m4 (an implementation of the UNIX macro processor)
m4:
m4: This is GNU m4, a program which copies its input to the output,
m4: expanding macros as it goes.  m4 has built-in functions for including
m4: named files, running commands, doing integer arithmetic, manipulating
m4: text in various ways, recursion, etc...  Macros can also be user-
m4: defined, and can take any number of arguments.
m4:
m4: GNU 'm4' was originally written by Rene Seindal, from Denmark.
m4:
m4:

PACKAGE NAME:  make-3.82-x86_64-2.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  397 K
PACKAGE SIZE (uncompressed):  1290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
make: make (GNU make utility to maintain groups of programs)
make:
make: This is the GNU implementation of make, which was written by Richard
make: Stallman and Roland McGrath.  The purpose of the make utility is to
make: determine automatically which pieces of a large program need to be 
make: recompiled, and issue the commands to recompile them.  
make:
make: This is needed to compile just about any major C program, including
make: the Linux kernel.
make:
make:

PACKAGE NAME:  nasm-2.09.04-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  362 K
PACKAGE SIZE (uncompressed):  1180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nasm: nasm (NASM assembler)
nasm:
nasm: NASM is the Netwide Assembler, a free portable assembler for the Intel
nasm: 80x86 microprocessor series, using primarily the traditional Intel
nasm: instruction mnemonics and syntax.
nasm:
nasm: NASM was written by Simon Tatham and Julian Hall.
nasm:
nasm:
nasm:
nasm:

PACKAGE NAME:  p2c-1.21alpha2-x86_64-3.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  307 K
PACKAGE SIZE (uncompressed):  920 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
p2c: p2c (Pascal to C translator)
p2c:
p2c: P2c is a tool for translating Pascal programs into C.  The input
p2c: consists of a set of source files in any of the following Pascal
p2c: dialects:  HP Pascal, Turbo/UCSD Pascal, DEC VAX Pascal, Oregon
p2c: Software Pascal/2, Macintosh Programmer's Workshop Pascal,
p2c: Sun/Berkeley Pascal, Texas Instruments Pascal, Apollo Domain Pascal.
p2c: Modula-2 syntax is also supported.  Output is a set of .c and .h
p2c: files that comprise an equivalent program in any of several dialects
p2c: of C.
p2c:

PACKAGE NAME:  perl-5.12.3-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  14501 K
PACKAGE SIZE (uncompressed):  62400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
perl: perl (Practical Extraction and Report Language)
perl:
perl: Larry Wall's "Practical Extraction and Report Language".  Perl is a
perl: language optimized for scanning arbitrary text files, extracting
perl: information from those text files, and printing reports based on that
perl: information.  It's also a good language for many system management
perl: tasks.  The language is intended to be practical (easy to use,
perl: efficient, complete) rather than beautiful (tiny, elegant, minimal).
perl:
perl:
perl:

PACKAGE NAME:  pkg-config-0.25-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  64 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pkg-config: pkg-config (system for managing library compile/link flags)
pkg-config:
pkg-config: pkg-config is a system for managing library compile/link flags
pkg-config: that works with automake and autoconf.  It replaces the ubiquitous
pkg-config: *-config scripts you may have seen with a single tool.  See the man
pkg-config: page that comes with pkg-config for full documentation.
pkg-config:
pkg-config:
pkg-config:
pkg-config:
pkg-config:

PACKAGE NAME:  pmake-1.111-x86_64-3.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  80 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pmake: pmake (BSD parallel make)
pmake:
pmake: This is PMake -- a parallel Make program originally written for the
pmake: Sprite operating system, ported from BSD Unix.  This may be useful if
pmake: you're going to port software with Makefiles designed for BSD.
pmake:
pmake: PMake was written by Adam de Boor.
pmake:
pmake:
pmake:
pmake:

PACKAGE NAME:  python-2.7.1-x86_64-3vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  11548 K
PACKAGE SIZE (uncompressed):  74570 K
PACKAGE REQUIRED:  bzip2 >= 1.0.6-x86_64-1,db44 >= 4.4.20-x86_64-2,expat >= 2.0.1-x86_64-2,fontconfig >= 2.8.0-x86_64-1,freetype >= 2.4.4-x86_64-1,gdbm >= 1.8.3-x86_64-4,glibc-solibs >= 2.13-x86_64-1,libX11 >= 1.4.1-x86_64-1,libXScrnSaver >= 1.2.1-x86_64-1,libXau >= 1.0.6-x86_64-1,libXdmcp >= 1.1.0-x86_64-1,libXext >= 1.2.0-x86_64-1,libXft >= 2.2.0-x86_64-1,libXrender >= 0.9.6-x86_64-1,libxcb >= 1.7-x86_64-1,ncurses >= 5.7-x86_64-3,openssl >= 0.9.8r-x86_64-1 | openssl-solibs >= 0.9.8r-x86_64-1,readline >= 5.2-x86_64-4,sqlite >= 3.7.3-x86_64-1,tcl >= 8.5.9-x86_64-1,tk >= 8.5.9-x86_64-1,zlib >= 1.2.5-x86_64-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python: python (object-oriented interpreted programming language)
python:
python: Python is an interpreted, interactive, object-oriented programming
python: language that combines remarkable power with very clear syntax.   
python: Python's basic power can be extended with your own modules written in 
python: C or C++.  Python is also adaptable as an extension language for
python: existing applications. 
python: License: GPL
python: Authors: 
python: Website: 

PACKAGE NAME:  requiredbuilder-0.16.2-noarch-2vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
requiredbuilder: requiredbuilder (Dependency generator for packaging)
requiredbuilder: 
requiredbuilder: RequiredBuilder is a simple tool to aid Slackware package 
requiredbuilder: developers in finding dependencies. For example it can be used to
requiredbuilder: write Zenwalk style depfiles or slack-required files for slapt-get's 
requiredbuilder: dependency checking.
requiredbuilder: 
requiredbuilder: 
requiredbuilder: License: GPL 3.0
requiredbuilder: Author:  Stefano Stabellini <stefano@stabellini.net>
requiredbuilder: Website: http://www.stabellini.net/requiredbuilder.html

PACKAGE NAME:  ruby-1.9.1_p431-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  3301 K
PACKAGE SIZE (uncompressed):  27410 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ruby: ruby (Interpreted object-oriented scripting language)
ruby:
ruby: Ruby is an interpreted scripting language for quick and easy
ruby: object-oriented programming.  It has many features to process text
ruby: files and to do system management tasks (as in Perl).  It is simple,
ruby: straight-forward, and extensible.
ruby:
ruby: Visit the Ruby project online at http://www.ruby-lang.org/
ruby:
ruby:
ruby:

PACKAGE NAME:  sbbuilder-0.4.12.4-noarch-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  6 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  perl >= 5.8.0-i586-1vl59 | perl >= 5.8.0-i586-1vl60
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sbbuilder: sbbuilder (perl script for generating SlackBuilds)
sbbuilder:
sbbuilder: SlackBuild Builder its a small perl script for automating 
sbbuilder: the generation of SlackBuilds and the directory structure needed
sbbuilder: for building packages compliant with the VectorLinux repository
sbbuilder: standards.
sbbuilder:
sbbuilder: License: GPL
sbbuilder: Authors: Kidd, rbistolfi
sbbuilder: Website: http://vectorlinux.com

PACKAGE NAME:  sip-4.12.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  343 K
PACKAGE SIZE (uncompressed):  1880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sip: SIP (a tool for generating Python bindings)
sip:
sip: SIP is a tool that makes it very easy to create Python bindings for
sip: C and C++ libraries.  It was originally developed to create PyQt,
sip: the Python bindings for the Qt toolkit, but can be used to create
sip: bindings for any C or C++ library.
sip:
sip:
sip:
sip: Homepage:  http://www.riverbankcomputing.co.uk/software/sip/
sip:

PACKAGE NAME:  slacktrack-2.08-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  92 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slacktrack: slacktrack (Slackware package building utilities)
slacktrack:
slacktrack: slacktrack tracks the installation of a 'make install' (or similar) 
slacktrack: and produces a Slackware compliant .tgz package from the results.
slacktrack: It can be used to build packages from Slackware's '.build' scripts
slacktrack: or your own.
slacktrack:
slacktrack: slacktrack tracks installations directly on the host's filesystem.
slacktrack:
slacktrack:
slacktrack:

PACKAGE NAME:  strace-4.5.20-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  100 K
PACKAGE SIZE (uncompressed):  380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
strace: strace (trace system calls and signals)
strace:
strace: Strace allows you to trace the execution of a command.  It runs the
strace: specified command until it exits, intercepting signals and system
strace: calls and dumping the information to the standard error.  System
strace: administrators, diagnosticians and trouble-shooters will find it
strace: invaluable for solving problems with programs for which the source
strace: is not readily available since they do not need to be recompiled in
strace: order to trace them.  
strace:
strace:

PACKAGE NAME:  subversion-1.6.16-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  3303 K
PACKAGE SIZE (uncompressed):  18240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
subversion: subversion (a version control system)
subversion:
subversion: Subversion is a version control system which allows you to keep old
subversion: versions of files and directories (usually source code), and keep a
subversion: log of who, when, and why changes occurred, similar to other such
subversion: systems like CVS, RCS or SCCS.  Subversion keeps all the information
subversion: to permit extracting previous versions of those files at any time.
subversion:
subversion: For more information about the Subversion project, visit:
subversion:   http://subversion.apache.org
subversion:

PACKAGE NAME:  vala-0.10.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  1433 K
PACKAGE SIZE (uncompressed):  8210 K
PACKAGE REQUIRED:  devhelp >= 0.23,gtk+2 >= 2.16.1,gnome-common >= 2.24.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vala|-----handy-ruler------------------------------------------------------|
vala: vala (A modern programming language for GNOME)
vala:
vala: Vala is a new programming language that aims to bring modern
vala: programming language features to GNOME developers without imposing
vala: any additional runtime requirements and without using a different ABI
vala: compared to applications and libraries written in C.
vala:
vala: http://live.gnome.org/Vala
vala:
vala:
vala: Packager: vl70@vector.linux.net on 17-Feb-2011

PACKAGE NAME:  yasm-1.1.0-x86_64-1.txz
PACKAGE LOCATION:  ./d
PACKAGE SIZE (compressed):  517 K
PACKAGE SIZE (uncompressed):  3770 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
yasm: yasm (complete rewrite of the NASM assembler)
yasm:
yasm: Yasm is a complete rewrite of the NASM assembler under the "new" BSD
yasm: License (some portions are under other licenses, see COPYING for
yasm: details).  Yasm currently supports the x86 and AMD64 instruction sets,
yasm: accepts NASM and GAS assembler syntaxes, outputs binary, ELF32, ELF64,
yasm: 32 and 64-bit Mach-O, RDOFF2, COFF, Win32, and Win64 object formats,
yasm: and generates source debugging information in STABS, DWARF 2, and
yasm: CodeView 8 formats.
yasm:
yasm: yasm home: http://www.tortall.net/projects/yasm/

PACKAGE NAME:  GConf-2.32.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  915 K
PACKAGE SIZE (uncompressed):  7640 K
PACKAGE REQUIRED:  glib2 >= 2.20.0,gtk+3 >= 3.0.0,orbit2 >= 2.14.17,libxml2 >= 2.7.3,openldap-client >= 2.4.21 | openldap >= 2.4.21,polkit >= 0.96
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
GConf: gconf (A process-transparent configuration system)
GConf:
GConf: GConf: is a process-transparent configuration database API used to
GConf: store user preferences. It has pluggable backends and features to
GConf: support workgroup administration.
GConf:
GConf: http://www.gnome.org
GConf:
GConf:
GConf:
GConf:

PACKAGE NAME:  SDL-1.2.14-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  553 K
PACKAGE SIZE (uncompressed):  2840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
SDL: sdl (Simple DirectMedia Layer library)
SDL:
SDL: This is the Simple DirectMedia Layer, a generic API that provides low
SDL: level access to audio, keyboard, mouse, joystick, 3D hardware via
SDL: OpenGL, and 2D framebuffer across multiple platforms.
SDL:
SDL: SDL links against alsa-lib, arts, audiofile, esound, and the X11
SDL: libraries.  Make sure all of these are installed if you're planning to
SDL: use SDL (a full installation will cover all of the prerequisites).
SDL:
SDL:

PACKAGE NAME:  SDL_Pango-0.1.2-x86_64-6vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  pango >= 1.22.3,sdl >= 1.2.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
SDL_Pango: SDL_Pango (Rendering of internationalized text for SDL)
SDL_Pango:
SDL_Pango: Pango is the text rendering engine of GNOME 2. SDL_Pango connects
SDL_Pango: that engine to SDL, the Simple DirectMedia Layer.
SDL_Pango:
SDL_Pango: http://SDLpango.sourceforge.net/
SDL_Pango:
SDL_Pango:
SDL_Pango: Packager: vl70@vector.linux.net on 14-Feb-2011
SDL_Pango:
SDL_Pango:

PACKAGE NAME:  SDL_Perl-2.2.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  292 K
PACKAGE SIZE (uncompressed):  1130 K
PACKAGE REQUIRED:  libpng >= 1.4.0,sdl >= 1.2.13,sdl_gfx >= 2.0.16,sdl_image >= 1.2.6,sdl_mixer >= 1.2.8,sdl_net >= 1.2.7,sdl_ttf >= 2.0.9,perl-yaml >= 0.66
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
SDL_Perl: SDL_Perl (SDL bindings for the Perl language)
SDL_Perl:
SDL_Perl: SDL (Simple DirectMedia Layer) bindings for the perl language.
SDL_Perl:
SDL_Perl: http://sdl.perl.org/
SDL_Perl:
SDL_Perl:
SDL_Perl: Packager: vl70@vector.linux.net on 23-Feb-2011
SDL_Perl:
SDL_Perl:
SDL_Perl:

PACKAGE NAME:  a52dec-0.7.4-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  49 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  djbfft >= 0.76
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
a52dec: a52dec (A free ATSC A/52 stream decoder)
a52dec:
a52dec: liba52 is a free library for decoding ATSC A/52 streams. The A/52
a52dec: standard is used in a variety of applications, including digital
a52dec: television and DVD. It is also known as AC-3. The package also
a52dec: includes a52dec, a small test program for liba52.
a52dec:
a52dec: http://liba52.sourceforge.net/
a52dec:
a52dec:
a52dec: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  aalib-1.4rc5-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  154 K
PACKAGE SIZE (uncompressed):  600 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aalib: aalib (ASCII Art library)               _1l1vlvlvlvlvlvlvlvlvvl=.
aalib:                                      __111llvl+' __...._   +1lv11=.
aalib: AA-lib is an ASCII art graphics     _11vllvlv+  =vlvlvl1=  /1vlvv1i=_
aalib: library.  Internally, the AA-lib   _vvllvlvlv=  -+vlvlvlvlvlvlvlvdvl=_
aalib: API is similar to other graphics  _:lvlvlvlvlv=.     --^-^1lvlvlrlvv1s
aalib: libraries, but it renders the     =llvlvvlvlvv11lvl=....   -lvlevlvlvv
aalib: the output into ASCII art (like   =lvlvlvlvll-^+1vv11111v_  vlkllvllvl
aalib: the example to the right :^)      =lvlvlvlvl1   +1vv1v1lv  _llvlvlvlvl
aalib: The developers of AA-lib are       +1lv |vlvl'    -^-^-   _1olvlvlvlv'
aalib: Jan Hubicka, Thomas A. K. Kjaer,   -1vl |lvlvlvlvlvlvlvlvv1vlvlvlvlv+.
aalib: Tim Newsome, and Kamil Toman.        +1 ^^^^^^^^^^^^^^^^^^^^^^^^vlv-
aalib:                                       -+uvlvlvlvlvlvlvlvlvlvlvlvl+_
aalib:                                          -vlvlvlvlvlvlvlvllvlvl-'

PACKAGE NAME:  alsa-lib-1.0.24.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  388 K
PACKAGE SIZE (uncompressed):  1700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
alsa-lib: alsa-lib (Advanced Linux Sound Architecture library)
alsa-lib:
alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-lib: functionality to the Linux operating system.  This is the ALSA library
alsa-lib: (libasound) which is used by audio applications.
alsa-lib:
alsa-lib: For more information, see http://alsa-project.org
alsa-lib:
alsa-lib:
alsa-lib:
alsa-lib:

PACKAGE NAME:  alsa-oss-1.0.17-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
alsa-oss: alsa-oss (library/wrapper to use OSS programs with ALSA)
alsa-oss:
alsa-oss: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-oss: functionality to the Linux operating system.  OSS (Open Sound System)
alsa-oss: is an older sound system for Linux that ALSA is replacing.  Using
alsa-oss: the aoss wrapper you can use programs that only support OSS with ALSA
alsa-oss: without having to load the OSS compatibility kernel modules.
alsa-oss:
alsa-oss:
alsa-oss:
alsa-oss:

PACKAGE NAME:  apr-1.4.2-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  205 K
PACKAGE SIZE (uncompressed):  960 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
apr: apr (Apache Portable Runtime)
apr:
apr: The mission of the Apache Portable Runtime (APR) is to provide a
apr: free library of C data structures and routines, forming a system
apr: portability layer to as many operating systems as possible.
apr:
apr:
apr:
apr:
apr:
apr:

PACKAGE NAME:  apr-util-1.3.10-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  108 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
apr-util: apr-util (Apache Portable Runtime utilities)
apr-util:
apr-util: The mission of the Apache Portable Runtime (APR) is to provide a
apr-util: free library of C data structures and routines, forming a system
apr-util: portability layer to as many operating systems as possible.
apr-util:
apr-util: This package contains additional utility interfaces for APR;
apr-util: including support for XML, LDAP, database interfaces, URI parsing,
apr-util: and more.
apr-util:
apr-util:

PACKAGE NAME:  aspell-0.60.6-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  579 K
PACKAGE SIZE (uncompressed):  3190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aspell: aspell (spell checker)
aspell:
aspell: GNU Aspell is a spell checker designed to eventually replace Ispell.
aspell: It can either be used as a library or as an independent spell checker.
aspell:
aspell:
aspell:
aspell:
aspell:
aspell:
aspell:

PACKAGE NAME:  aspell-en-6.0_0-noarch-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1065 K
PACKAGE SIZE (uncompressed):  3550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aspell-en: aspell-en
aspell-en:
aspell-en: GNU Aspell 0.60 English Dictionary Package.
aspell-en:
aspell-en:
aspell-en:
aspell-en:
aspell-en:
aspell-en:
aspell-en:
aspell-en:

PACKAGE NAME:  atk-1.32.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  233 K
PACKAGE SIZE (uncompressed):  2200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
atk: atk (accessibility functions library)
atk:
atk: atk is a library of accessibility functions that is used by the
atk: GTK+-2 toolkit.
atk:
atk:
atk:
atk:
atk:
atk:
atk:

PACKAGE NAME:  atkmm-2.22.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  356 K
PACKAGE SIZE (uncompressed):  1940 K
PACKAGE REQUIRED:  atk >= 1.32.0,gtlibmm >= 2.25.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
atkmm: atkmm (C++ interface for the ATK library)
atkmm:
atkmm: atkmm provides a C++ interface for the ATK library. Highlights include
atkmm: typesafe callbacks, widgets extensible via inheritance and a
atkmm: comprehensive set of widget classes that can be freely combined to
atkmm: quickly create complex user interfaces.
atkmm:
atkmm: http://www.gtkmm.org/
atkmm:
atkmm:
atkmm: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  audiofile-0.2.7-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  118 K
PACKAGE SIZE (uncompressed):  690 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
audiofile: audiofile (audio support library)
audiofile:
audiofile: Audiofile is a library to handle various audio file formats, and is
audiofile: used by the esound daemon.  You can also use it to develop your own
audiofile: audiofile applications.
audiofile:
audiofile:
audiofile:
audiofile:
audiofile:
audiofile:

PACKAGE NAME:  babl-0.1.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  66 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
babl: babl (pixel format translation library)
babl: 
babl: babl is a dynamic, any to any, pixel format translation library.
babl: 
babl: It allows converting between different methods of storing pixels known
babl: as pixel formats that have with different bitdepths and other data
babl: representations, color models and component permutations.
babl: 
babl: A vocabulary to formulate new pixel formats from existing primitives is
babl: provided as well as the framework to add new color models and data types.
babl: 

PACKAGE NAME:  boost-1.45.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  5269 K
PACKAGE SIZE (uncompressed):  63440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
boost: boost (Boost C++ Libraries)
boost:
boost: Boost provides free peer-reviewed portable C++ source libraries.
boost: The emphasis is on libraries that work well with the C++ Standard
boost: Library.  One goal is to establish "existing practice" and provide
boost: reference implementations so that the Boost libraries are suitable
boost: for eventual standardization.
boost:
boost: Homepage:  http://www.boost.org/
boost:
boost:

PACKAGE NAME:  cairo-1.10.2-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1401 K
PACKAGE SIZE (uncompressed):  7620 K
PACKAGE REQUIRED:  binutils >= 2.21.51.0.6,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,glib2 >= 2.28.3,glibc-solibs >= 2.13,libX11 >= 1.4.2,libXau >= 1.0.6,libXdmcp >= 1.1.0,libXrender >= 0.9.6,libpng >= 1.4.5,libxcb >= 1.7,pixman >= 0.20.2,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cairo: cairo (2D graphics library)
cairo: Cairo is a 2D graphics library with support for multiple output 
cairo: devices. Currently supported output targets include the X 
cairo: Window System, Win32, image buffers, and PostScript, PDF, and 
cairo: SVG file output. Experimental backends include OpenGL (through 
cairo: Glitz), Quartz, and XCB.
cairo:
cairo: License: LGPL 2.1 / Mozilla Public License 1.1
cairo: Authors: http://cairographics.org
cairo: Website: http://cairographics.org

PACKAGE NAME:  cairomm-1.9.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  286 K
PACKAGE SIZE (uncompressed):  2700 K
PACKAGE REQUIRED:  cairo >= 1.8.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cairomm: cairomm (C++ API for the cairo graphics library)
cairomm:
cairomm: Cairomm is the C++ API for the cairo graphics library. It offers all
cairomm: the power of cairo with an interface familiar to C++ developers,
cairomm: including use of the Standard Template Library where it makes sense.
cairomm:
cairomm: http://www.cairographics.org
cairomm:
cairomm:
cairomm: Packager: vl70@vector.linux.net on 26-Mar-2011
cairomm:

PACKAGE NAME:  chmlib-0.40-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
chmlib: chmlib (library for accessing CHM files)
chmlib:
chmlib: chmlib is a small library designed for accessing MS ITSS files.
chmlib: The ITSS file format is used for Microsoft Html Help files (.chm), 
chmlib: which have been the predominant medium for software documentation 
chmlib: from Microsoft during the past several years, having superceded 
chmlib: the previously used .hlp file format.
chmlib:
chmlib: Homepage:  http://www.jedrea.com/chmlib/
chmlib:
chmlib:

PACKAGE NAME:  cython-0.14.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1223 K
PACKAGE SIZE (uncompressed):  7750 K
PACKAGE REQUIRED:  python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cython|-----handy-ruler------------------------------------------------------|
cython: cython (A language for writing Python extension modules)
cython:
cython: This is a development version of Pyrex, a language for writing Python 
cython: extension modules.
cython:
cython: http://www.cython.org
cython:
cython:
cython: Packager: root@vector.linux.net on 27-Feb-2011
cython:
cython:

PACKAGE NAME:  db44-4.4.20-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  688 K
PACKAGE SIZE (uncompressed):  6580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
db44: db4 (Berkeley database library version 4.4.x)
db44:
db44: The Berkeley Database (Berkeley DB) library provides embedded database
db44: support for both traditional and client/server applications.
db44:
db44: This package should be installed if compatibility is needed with
db44: databases created with the Berkeley DB version 4.4.x.
db44:
db44:
db44:
db44:

PACKAGE NAME:  dbus-glib-0.88-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  120 K
PACKAGE SIZE (uncompressed):  740 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dbus-glib: dbus-glib (Glib bindings for dbus)
dbus-glib:
dbus-glib: This package includes the glib bindings for the dbus IPC library.
dbus-glib:
dbus-glib:
dbus-glib:
dbus-glib:
dbus-glib:
dbus-glib:
dbus-glib:
dbus-glib:

PACKAGE NAME:  dbus-python-0.83.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  103 K
PACKAGE SIZE (uncompressed):  720 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dbus-python: dbus-python (Python bindings for dbus)
dbus-python:
dbus-python: This package includes python bindings for the D-Bus messagebus.
dbus-python:
dbus-python:
dbus-python:
dbus-python:
dbus-python:
dbus-python:
dbus-python:
dbus-python:

PACKAGE NAME:  desktop-file-utils-0.16-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
desktop-file-utils: desktop-file-utils (Utilities for manipulating desktop files)
desktop-file-utils:
desktop-file-utils: Some utilities from freedesktop.org for handling .desktop files:
desktop-file-utils:
desktop-file-utils: desktop-file-validate:  validates a desktop file and prints
desktop-file-utils:   warnings/errors about spec violations.
desktop-file-utils: desktop-file-install:  installs a desktop file to the applications
desktop-file-utils:   directory, optionally munging it a bit in transit.
desktop-file-utils: desktop-menu-tool:  loads .vfolder-info and .menu files and does
desktop-file-utils:   operations on them.
desktop-file-utils:

PACKAGE NAME:  dirac-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  3903 K
PACKAGE SIZE (uncompressed):  34210 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,glibc-solibs >= 2.13-x86_64-1,perl >= 5.12.3-x86_64-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dirac: dirac (A general-purpose video codec)
dirac:
dirac: Dirac is a general-purpose video codec aimed at resolutions from QCIF
dirac: (176x144) to HDTV (1920x1080) progressive or interlaced. It uses
dirac: wavelets, motion compensation and arithmetic coding and aims to be
dirac: competitive with other state of the art codecs.
dirac:
dirac: http://dirac.sourceforge.net/
dirac:
dirac:
dirac:

PACKAGE NAME:  directfb-1.4.3-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1203 K
PACKAGE SIZE (uncompressed):  6700 K
PACKAGE REQUIRED:  freetype >= 2.3.9,libX11 >= 1.2.2,libXext >= 1.0.5,libjpeg >= 8,libpng >= 1.4.0,libv4l >= 0.6.0,libvncserver >= 0.9.1,sdl >= 1.2.14,sysfsutils >= 2.1.0,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
directfb|-----handy-ruler------------------------------------------------------|
directfb: directfb (Graphics abstraction library for the Linux Framebuffer)
directfb:
directfb: DirectFB is a thin library that provides hardware graphics
directfb: acceleration, input device handling and abstraction, integrated
directfb: windowing system with support for translucent windows and multiple
directfb: display layers on top of the Linux Framebuffer Device.
directfb:
directfb: http://www.directfb.org/
directfb:
directfb:
directfb: Packager: vl70@vector.linux.net on 22-Feb-2011

PACKAGE NAME:  djbfft-0.76-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
djbfft: djbfft (Extremely fast library for floating-point convolution)
djbfft:
djbfft: djbfft is an extremely fast library for floating-point convolution.
djbfft: The current version holds most of the speed records for
djbfft: double-precision FFTs on general-purpose computers.
djbfft:
djbfft: http://cr.yp.to/djbfft.html
djbfft:
djbfft:
djbfft: Packager: vl70@vector.linux.net on 26-Mar-2011
djbfft:

PACKAGE NAME:  djvulibre-3.5.22-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  913 K
PACKAGE SIZE (uncompressed):  3050 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
djvulibre: djvulibre (web-centric document and image format)
djvulibre:
djvulibre: DjVu is a web-centric format and software platform for distributing
djvulibre: documents and images.  DjVu content downloads faster, displays and 
djvulibre: renders faster, looks nicer on a screen, and consume less client 
djvulibre: resources than competing formats.  DjVu was originally developed at
djvulibre: AT&T Labs-Research by Leon Bottou, Yann LeCun, Patrick Haffner, and
djvulibre: many others.
djvulibre:
djvulibre: Homepage:  http://djvu.sourceforge.net
djvulibre:

PACKAGE NAME:  enchant-1.5.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  134 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
enchant: Enchant (a wrapper for spellcheck libraries)
enchant:
enchant: Enchant supports:
enchant:   * Aspell/Pspell
enchant:   * Ispell
enchant:   * MySpell/HunSpell
enchant:   * Uspell (Yiddish, Hebrew and Eastern European languages)
enchant:   * Hspell (Hebrew) and others
enchant:
enchant: http://www.abisource.com/projects/enchant/
enchant:

PACKAGE NAME:  epydoc-3.0.1-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1212 K
PACKAGE SIZE (uncompressed):  16980 K
PACKAGE REQUIRED:  python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
epydoc|-----handy-ruler------------------------------------------------------|
epydoc: epydoc (Automatic API documentation generation tool for Python)
epydoc:
epydoc: Epydoc is a tool for generating API documentation for Python modules,
epydoc: based on their docstrings.
epydoc:
epydoc: http://epydoc.sourceforge.net/
epydoc:
epydoc:
epydoc: Packager: vl70@vector.linux.net on 14-Feb-2011
epydoc:
epydoc:

PACKAGE NAME:  esound-0.2.41-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  96 K
PACKAGE SIZE (uncompressed):  390 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
esound: esound (Enlightened Sound Daemon)
esound:
esound: EsounD, the Enlightened Sound Daemon, is a server process that mixes
esound: several audio streams for playback by a single audio device. For
esound: example, if you're listening to music on a CD and you receive a
esound: sound-related event from ICQ, the two applications won't have to
esound: jockey for the use of your sound card.  Install esound if you'd like
esound: to let sound applications share your audio device.
esound:
esound:
esound:

PACKAGE NAME:  exiv2-0.21.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  831 K
PACKAGE SIZE (uncompressed):  3840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
exiv2: Exiv2 (Exif and IPTC Metadata Library and Tools)
exiv2:
exiv2: Exiv2 is a C++ library and a command line utility to read and write
exiv2: Exif and IPTC image metadata.
exiv2:
exiv2: Homepage:  http://www.exiv2.org/
exiv2:
exiv2:
exiv2:
exiv2:
exiv2:

PACKAGE NAME:  expat-2.0.1-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  116 K
PACKAGE SIZE (uncompressed):  670 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
expat: expat (C library for parsing XML)
expat:
expat: This is Expat, a C library for parsing XML, written by James Clark.
expat: Expat is a stream-oriented XML parser used by Python, GNOME, Xft2,
expat: and other things.
expat:
expat:
expat:
expat:
expat:
expat:

PACKAGE NAME:  faac-1.28-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  55 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  libmp4v2 >= 1.9.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
faac: faac (Encoder and encoding library for MPEG2/4 AAC)
faac:
faac: FAAC is an AAC audio encoder. It currently supports MPEG-4 LTP, MAIN
faac: and LOW COMPLEXITY object types and MAIN and LOW MPEG-2 object types.
faac: It also supports multichannel and gapless encoding.
faac:
faac: http://www.audiocoding.com/
faac:
faac:
faac: Packager: vl70@vector.linux.net on 14-Feb-2011
faac:

PACKAGE NAME:  faad2-2.7-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  168 K
PACKAGE SIZE (uncompressed):  420 K
PACKAGE REQUIRED:  sysfsutils >= 2.1.0,xmms >= 1.2.11
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
faad2: faad2 (Library and frontend for decoding MPEG2/4 AAC)
faad2:
faad2: FAAD 2 is a LC, MAIN and LTP profile, MPEG2 and MPEG-4 AAC decoder,
faad2: completely written from scratch.
faad2:
faad2: http://www.audiocoding.com/
faad2:
faad2:
faad2: Packager: vl70@vector.linux.net on 14-Feb-2011
faad2:
faad2:

PACKAGE NAME:  farsight2-0.0.23-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  195 K
PACKAGE SIZE (uncompressed):  1260 K
PACKAGE REQUIRED:  gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,libnice >= 0.0.9
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
farsight2: farsight2 (A audio/video conferencing framework)
farsight2:
farsight2: FarSight is an audio/video conferencing framework specifically
farsight2: designed for Instant Messengers. It aims to provide a code structure
farsight2: that will be able to absorb as many video conferencing protocols as
farsight2: possible. It also offers an interface to those Instant Messengers,
farsight2: allowing them to embed the video feeds and controls into them.
farsight2:
farsight2: http://farsight.freedesktop.org/wiki/
farsight2:
farsight2: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  ffmpeg-0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  3204 K
PACKAGE SIZE (uncompressed):  13440 K
PACKAGE REQUIRED:  a52dec >= 0.7.4,faac >= 1.28,gsm >= 1.0.12,lame >= 3.98.2,libdc1394 >= 2.0.2,libdca >= 0.0.5,libnut >= 20090725,libogg >= 1.1.3,liboil >= 0.3.16,libtheora >= 1.0,libva >= 1.0.3,libvpx >= 20100615,libvorbis >= 1.2.3,opencore-amr >= 0.1.1,openjpeg >= 1.3,rtmpdump >= 2.3,schroedinger >= 1.0.5,sdl >= 1.2.13,x264 >= 20091020,xvidcore >= 1.2.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ffmpeg: FFmpeg (Video and audio converter)
ffmpeg:
ffmpeg: FFmpeg is a very fast audio and video converter.  It can also grab
ffmpeg: from a live A/V source. The command line interface is designed to be
ffmpeg: intuitive, in the sense that FFmpeg tries to figure out all the
ffmpeg: parameters, when possible.  You have usually to give only the target
ffmpeg: bitrate you want.  FFmpeg can also convert from any sample rate to
ffmpeg: any other, and resize video on the fly with a high quality polyphase
ffmpeg: filter.
ffmpeg: http://ffmpeg.mplayerhq.hu/
ffmpeg: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  fftw-3.2.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1035 K
PACKAGE SIZE (uncompressed):  4050 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fftw: fftw (Fastest Fourier Transform in the West)
fftw: 
fftw: FFTW is a free collection of fast C routines for computing the
fftw: Discrete Fourier Transform in one or more dimensions.  It includes
fftw: complex, real, symmetric, and parallel transforms, and can handle
fftw: arbitrary array sizes efficiently.  FFTW is typically faster than
fftw: other publically-available FFT implementations, and is even
fftw: competitive with vendor-tuned libraries.
fftw:
fftw: Homepage: http://www.fftw.org/
fftw:

PACKAGE NAME:  freetype-2.4.4-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  410 K
PACKAGE SIZE (uncompressed):  1880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
freetype: freetype (A Free, High-Quality, and Portable Font Engine)
freetype:
freetype: The FreeType engine is a free and portable TrueType font rendering
freetype: engine.  It has been developed to provide TrueType support to a
freetype: great variety of platforms and environments.
freetype:
freetype:
freetype:
freetype:
freetype:
freetype:

PACKAGE NAME:  fribidi-0.10.9-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fribidi: fribidi (Unicode BiDirectional algorithm library)
fribidi:
fribidi: This library implements the Unicode BiDirectional algorithm, which
fribidi: is needed in order to support right-to-left languages such as Arabic
fribidi: and Hebrew.  It is used in display software like KDE's SVG modules.
fribidi:
fribidi:
fribidi:
fribidi:
fribidi:
fribidi:

PACKAGE NAME:  fuse-2.8.5-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  123 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fuse: FUSE (Filesystem in Userspace)
fuse: 
fuse: FUSE is a simple interface for userspace programs to export a virtual
fuse: filesystem to the Linux kernel.  FUSE also aims to provide a secure
fuse: method for non privileged users to create and mount their own
fuse: filesystem implementations.
fuse:
fuse: The FUSE web site can be found here: http://fuse.sourceforge.net
fuse:
fuse:
fuse:

PACKAGE NAME:  gamin-0.1.10-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  107 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gamin: gamin (A minimalist FAM replacement)
gamin:
gamin: Gamin is a file and directory monitoring system defined to be a subset
gamin: of the FAM (File Alteration Monitor) system.
gamin:
gamin: The homepage for Gamin is:  http://www.gnome.org/~veillard/gamin/ 
gamin:
gamin:
gamin:
gamin:
gamin:

PACKAGE NAME:  gc-7.2alpha4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  238 K
PACKAGE SIZE (uncompressed):  1140 K
PACKAGE REQUIRED:  libatomic_ops >= 1.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gc|-----handy-ruler------------------------------------------------------|
gc: gc (C++ Garbage Collector)
gc:
gc: The Boehm-Demers-Weiser conservative garbage collector can be used as
gc: a garbage collecting replacement for C malloc or C++ new.
gc:
gc: http://www.hpl.hp.com/personal/Hans_Boehm/gc/
gc:
gc:
gc: Packager: vl70@vector.linux.net on 25-Mar-2011
gc:
gc:

PACKAGE NAME:  gd-2.0.35-x86_64-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  142 K
PACKAGE SIZE (uncompressed):  700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gd: gd (a graphics library)
gd:
gd: gd is a graphics library.  It allows your code to quickly draw images
gd: complete with lines, arcs, text, multiple colors, cut and paste from
gd: other images, and flood fills, and write out the result as a PNG or
gd: JPEG file.  This is particularly useful in web applications, where
gd: PNG and JPEG are two of the formats accepted for inline images by
gd: most browsers.
gd:
gd: The gd library was written by Thomas Boutell.
gd:

PACKAGE NAME:  gdk-pixbuf2-2.22.1-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  562 K
PACKAGE SIZE (uncompressed):  3500 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gdk-pixbuf2: gdk-pixbuf2 (image library used by GTK+ v2)
gdk-pixbuf2:
gdk-pixbuf2: The gdk-pixbuf library provides a number of features:
gdk-pixbuf2: - GdkPixbuf structure for representing images.
gdk-pixbuf2: - Image loading facilities, both synchronous and progressive.
gdk-pixbuf2: - Rendering of a GdkPixbuf into various formats:
gdk-pixbuf2:   drawables (windows, pixmaps), GdkRGB buffers.
gdk-pixbuf2: - Fast scaling and compositing of pixbufs.
gdk-pixbuf2: - Simple animation loading (ie. animated gifs).
gdk-pixbuf2:
gdk-pixbuf2:

PACKAGE NAME:  gegl-0.1.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  327 K
PACKAGE SIZE (uncompressed):  1910 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gegl: GEGL (Generic Graphics Library)
gegl: 
gegl: GEGL (Generic Graphics Library) is a graph based image processing
gegl: framework.
gegl: 
gegl: GEGL provides infratructure to do demand based cached non destructive
gegl: image editing on larger than RAM buffers. Through babl it provides
gegl: support for a wide range of color models and pixel storage formats for
gegl: input and output.
gegl: 
gegl: 

PACKAGE NAME:  giflib-4.1.6-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  167 K
PACKAGE SIZE (uncompressed):  830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
giflib: giflib (GIF image format library)
giflib:
giflib: A library to load and save (uncompressed only) images using GIF,
giflib: or Graphics Interchange Format.  GIF was introduced by CompuServe
giflib: in 1987, but is still widely used today (especially on web pages.)
giflib:
giflib:
giflib:
giflib:
giflib:
giflib:

PACKAGE NAME:  glew-1.5.7-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  262 K
PACKAGE SIZE (uncompressed):  2530 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glew: glew (the OpenGL Extension Wrangler Library)
glew:
glew: The OpenGL Extension Wrangler Library (GLEW) is a cross-platform 
glew: open-source C/C++ extension loading library. GLEW provides efficient 
glew: run-time mechanisms for determining which OpenGL extensions are 
glew: supported on the target platform.
glew:
glew: Homepage: http://glew.sourceforge.net/
glew:
glew:
glew:

PACKAGE NAME:  glib-1.2.10-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  142 K
PACKAGE SIZE (uncompressed):  750 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glib: glib (library of C routines, version 1.x)
glib:
glib: GLib is a library which includes support routines for C such as lists,
glib: trees, hashes, memory allocation, and many other things.
glib:
glib: GLib is required by nearly everything that uses GTK+ version 1.x.
glib:
glib:
glib:
glib:
glib:

PACKAGE NAME:  glib2-2.28.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  2758 K
PACKAGE SIZE (uncompressed):  26390 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glib2: glib2 (library of C routines)
glib2:
glib2: GLib is a library which includes support routines for C such as lists,
glib2: trees, hashes, memory allocation, and many other things.
glib2:
glib2:
glib2:
glib2:
glib2:
glib2:
glib2:

PACKAGE NAME:  glibc-2.13-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  11511 K
PACKAGE SIZE (uncompressed):  138180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc: glibc (GNU C libraries)
glibc:
glibc: This package contains the GNU C libraries and header files.  The GNU
glibc: C library was written originally by Roland McGrath, and is currently
glibc: maintained by Ulrich Drepper.  Some parts of the library were
glibc: contributed or worked on by other people.
glibc:
glibc: You'll need this package to compile programs.
glibc:
glibc:
glibc:

PACKAGE NAME:  glibc-i18n-2.13-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  6470 K
PACKAGE SIZE (uncompressed):  111210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibc-i18n: glibc-i18n (locale files from glibc)
glibc-i18n:
glibc-i18n: These files go in /usr/lib/locale and /usr/share/i18n/ to provide
glibc-i18n: internationalization support.  You'll need this package unless you
glibc-i18n: will be using US English only.
glibc-i18n:
glibc-i18n:
glibc-i18n:
glibc-i18n:
glibc-i18n:
glibc-i18n:

PACKAGE NAME:  glibmm-2.25.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  611 K
PACKAGE SIZE (uncompressed):  4310 K
PACKAGE REQUIRED:  glib2 >= 2.20.0,libsigc++ >= 2.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glibmm: glibmm (C++ interface for GTK2)
glibmm:
glibmm: gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps
glibmm: GTK+ 2. Highlights include typesafe callbacks, widgets extensible via
glibmm: inheritance and a comprehensive set of widget classes that can be
glibmm: freely combined to quickly create complex user interfaces.
glibmm:
glibmm: http://gtkmm.sourceforge.net/
glibmm:
glibmm:
glibmm: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  gmime-2.4.15-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  239 K
PACKAGE SIZE (uncompressed):  2060 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gmime: gmime (MIME parsing library)
gmime:
gmime: GMime is a set of utilities for parsing and creating messages using
gmime: the Multipurpose Internet Mail Extension (MIME) as defined by many
gmime: Internet RFCs.
gmime:
gmime: Jeffrey Stedfast is the author of GMime.
gmime:
gmime:
gmime:
gmime:

PACKAGE NAME:  gmp-5.0.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  458 K
PACKAGE SIZE (uncompressed):  3000 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gmp: gmp (GNU multiple precision arithmetic library)
gmp:
gmp: GNU MP is a library for arbitrary precision arithmetic, operating on
gmp: signed integers, rational numbers, and floating point numbers.  It has
gmp: a rich set of functions, and the functions have a regular interface.
gmp:
gmp:
gmp:
gmp:
gmp:
gmp:

PACKAGE NAME:  gnome-common-2.28.0-noarch-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  104 K
PACKAGE SIZE (uncompressed):  550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-common: gnome-common (Useful things common to building gnome packages)
gnome-common:
gnome-common: This package contains sample files that should be used to develop
gnome-common: pretty much every GNOME application. The programs included here are
gnome-common: not needed for running gnome apps or building ones from distributed
gnome-common: tarballs. They are only useful for compiling from CVS sources or when
gnome-common: developing the build infrastructure for a GNOME application.
gnome-common:
gnome-common: http://developer.gnome.org
gnome-common:
gnome-common: Packager: vl70@vector.Linux.net on 16-Jan-2011

PACKAGE NAME:  gnome-keyring-2.32.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  898 K
PACKAGE SIZE (uncompressed):  6560 K
PACKAGE REQUIRED:  dbus >= 1.2.12,gtk+2 >= 2.16.,libgnome-keyring >= 2.30.0,libtasn1 >= 1.8,libgcrypt >= 1.4.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-keyring: gnome-keyring (A framework for managing user passwords and secrets)
gnome-keyring:
gnome-keyring: gnome-keyring manages passwords and other types of secrets for the
gnome-keyring: user, storing them encrypted with a main password. Applications can
gnome-keyring: use the gnome-keyring library to integrate with the keyring.
gnome-keyring:
gnome-keyring: http://www.gnome.org
gnome-keyring:
gnome-keyring:
gnome-keyring: Packager: vl70@vector.linux.net on 25-Feb-2011
gnome-keyring:

PACKAGE NAME:  gnome-python-2.28.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  79 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  gconf >= 2.26.0,glib2 >= 2.20.1,gnome-vfs >= 2.24.1,gtk+2 >= 2.16.1,libbonobo >= 2.24.1,libbonoboui >= 2.24.1,libglade >= 2.6.3,libgnome >= 2.24.0,libgnomeui >= 2.24.0,libgnomecanvas >= 2.26.0,pango >= 1.24.0,python >= 2.6.1,pygtk >= 2.14.1,pyorbit >= 2.24.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-python: gnome-python (The sources for the PyGNOME Python extension module)
gnome-python:
gnome-python: The gnome-python package contains the source packages for the Python
gnome-python: bindings for GNOME called PyGNOME.
gnome-python: PyGNOME is an extension module for Python that provides access to the
gnome-python: base GNOME libraries, so you have access to more widgets, a simple
gnome-python: configuration interface, and metadata support.
gnome-python:
gnome-python: http://ftp.gnome.org/pub/GNOME/sources/gnome-python/
gnome-python:
gnome-python: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  gnome-vfs-2.24.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  944 K
PACKAGE SIZE (uncompressed):  7010 K
PACKAGE REQUIRED:  acl >= 2.2.47,avahi >= 0.6.24,dbus >= 1.2.12,dbus-glib >= 0.80,gconf >= 2.26.0,glib2 >= 2.20.0,gnome-mime-data >= 2.18.0,keyutils >= 1.2,libgamin >= 0.1.10,libxml2 >= 2.7.3,orbit2 >= 2.14.17,samba >= 3.2.3,popt >= 1.14,shared-mime-info,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-vfs: gnome-vfs (The GNOME virtual file-system libraries)
gnome-vfs:
gnome-vfs: GNOME VFS is the GNOME virtual file system. It is the foundation of
gnome-vfs: the Nautilus file manager. It provides a modular architecture and
gnome-vfs: ships with several modules that implement support for file systems,
gnome-vfs: http, ftp, and others. It provides a URI-based API, backend
gnome-vfs: supporting asynchronous file operations, a MIME type manipulation
gnome-vfs: library, and other features.
gnome-vfs:
gnome-vfs: http://www.gnome.org/
gnome-vfs: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  gobject-introspection-0.10.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  836 K
PACKAGE SIZE (uncompressed):  7300 K
PACKAGE REQUIRED:  glib2 >= 2.28.3,glibc-solibs >= 2.13,libffi >= 3.0.9,python >= 2.7.1,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gobject-introspection: gobject-introspection (Introspection system for GObject-based libraries)
gobject-introspection:
gobject-introspection: GObject Introspection can scan C header and source files in order to
gobject-introspection: generate introspection "typelib" files.  It also provides an API to
gobject-introspection: examine typelib files, useful for creating language bindings among
gobject-introspection: other things.
gobject-introspection:
gobject-introspection: License: GPL
gobject-introspection: Authors: 
gobject-introspection: Website: http://live.gnome.org/GObjectIntrospection

PACKAGE NAME:  goffice-0.8.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1310 K
PACKAGE SIZE (uncompressed):  8680 K
PACKAGE REQUIRED:  glib2 >= 2.22.2,gtk+2 >= 2.18.3,libglade >= 2.6.4,libgsf >= 1.14.16
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
goffice: goffice (Goffice support libraries)
goffice:
goffice: Support libraries for gnome office.
goffice:
goffice: http://freshmeat.net/projects/goffice/
goffice:
goffice:
goffice: Packager: vl70@vector.linux.net on 26-Mar-2011
goffice:
goffice:
goffice:

PACKAGE NAME:  goffice-0.8.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1290 K
PACKAGE SIZE (uncompressed):  8580 K
PACKAGE REQUIRED:  glib2 >= 2.22.2,gtk+2 >= 2.18.3,libglade >= 2.6.4,libgsf >= 1.14.16
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
goffice|-----handy-ruler------------------------------------------------------|
goffice: goffice (Goffice support libraries)
goffice:
goffice: Support libraries for gnome office.
goffice:
goffice: http://freshmeat.net/projects/goffice/
goffice:
goffice:
goffice: Packager: vl70@vector.linux.net on 14-Feb-2011
goffice:
goffice:
goffice:

PACKAGE NAME:  gsl-1.14-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1369 K
PACKAGE SIZE (uncompressed):  8270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gsl: gsl (The GNU Scientific Library for numerical analysis)
gsl:
gsl: The gsl-devel package contains the header files and static libraries
gsl: necessary for developing programs using the GSL (GNU Scientific
gsl: Library).
gsl:
gsl: http://www.gnu.org/software/gsl/
gsl:
gsl:
gsl: Packager: vl70@vector.linux.net on 26-Mar-2011
gsl:

PACKAGE NAME:  gsm-1.0.13-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  39 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gsm: gsm (Shared libraries for GSM speech compressor)
gsm:
gsm: Contains runtime shared libraries for libgsm, an implementation of
gsm: the European GSM 06.10 provisional standard for full-rate speech
gsm: transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse
gsm: excitation/long term prediction) coding at 13 kbit/s.
gsm:
gsm: http://kbs.cs.tu-berlin.de/~jutta/toast.html
gsm:
gsm:
gsm: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  gst-plugins-bad-0.10.20-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  768 K
PACKAGE SIZE (uncompressed):  4720 K
PACKAGE REQUIRED:  alsa-libs >= 1.0.19,amrwb >= 7.0.0.2,celt >= 0.7.0,faac >= 1.28,faad2 >= 2.7,exempi >= 2.0.2,flite >= 1.3,game-music-emu >= 0.5.5,glib2 >= 2.20.0,gmyth >= 0.4,gsm >= 1.0.12,gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,gtk+2 >= 2.16.0,jack >= 0.116.2,ladspa >= 1.13,libcdaudio >= 0.99.12p2,libdca >= 0.0.5,libdc1394 >= 2.0.2,libiptcdata >= 1.0.3,libmms >= 0.4,libmodplug >= 0.8.4,libmusicbrainz >= 2.1.5,liboil >= 0.3.15,libpng >= 1.4.1,libtimidity >= 0.1.0,libvdpau >= 0.2,libvpx >= 0.9.0,mjpegtools >= 1.9.0,musepack >= r435,neon >= 0.28.3,orc >= 0.4.3,sdl >= 1.2.13,soundtouch >= 1.3.1,twolame >= 0.3.12,vcdimager >= 0.7.23,wavpack >= 4.50.1,wildmidi >= 0.2.2,zbar >= 0.10
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gst-plugins-bad: gst-plugins-bad (GStreamer streaming media framework "bad" plug-ins)
gst-plugins-bad:
gst-plugins-bad: This package contains GStreamer plug-ins that have licensing issues,
gst-plugins-bad: aren't tested well enough, or the code is not of good enough quality.
gst-plugins-bad:
gst-plugins-bad: http://gstreamer.freedesktop.org/
gst-plugins-bad:
gst-plugins-bad:
gst-plugins-bad: Packager: vl70@vector.linux.net on 14-Feb-2011
gst-plugins-bad:
gst-plugins-bad:

PACKAGE NAME:  gst-plugins-base-0.10.32-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1109 K
PACKAGE SIZE (uncompressed):  9020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gst-plugins-base: gst-plugins-base (base set of GStreamer plugins)
gst-plugins-base:
gst-plugins-base: GStreamer Base Plug-ins is a well-groomed and well-maintained 
gst-plugins-base: collection of GStreamer plug-ins and elements, spanning the 
gst-plugins-base: range of possible types of elements one would want to write 
gst-plugins-base: for GStreamer.  It also contains helper libraries and base 
gst-plugins-base: classes useful for writing elements.  A wide range of video 
gst-plugins-base: and audio decoders, encoders, and filters are included.
gst-plugins-base:
gst-plugins-base:
gst-plugins-base:

PACKAGE NAME:  gst-plugins-good-0.10.27-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  872 K
PACKAGE SIZE (uncompressed):  3800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gst-plugins-good: gst-plugins-good (good set of GStreamer plugins)
gst-plugins-good:
gst-plugins-good: GStreamer Good Plug-ins is a set of plug-ins that have good
gst-plugins-good: quality code, correct functionality, and a good license
gst-plugins-good: (LGPL for the plug-in code, LGPL or LGPL-compatible for the
gst-plugins-good: supporting library).
gst-plugins-good:
gst-plugins-good:
gst-plugins-good:
gst-plugins-good:
gst-plugins-good:

PACKAGE NAME:  gst-plugins-ugly-0.10.16-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  162 K
PACKAGE SIZE (uncompressed):  660 K
PACKAGE REQUIRED:  a52dec >= 0.7.4,alsa-libs >= 1.0.19,amrnb >= 7.0.0.2,cairo >= 1.8.6,esound >= 0.2.41,gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,gst-plugins-good >= 0.10.13,gtk+2 >= 2.16.0,lame >= 3.98.2,libcdio >= 0.82,libdvdread >= 4.1.3,libid3tag >= 0.15.1b,libmad >= 0.15.1b,libmpeg2 >= 0.5.1,liboil >= 0.3.15,libsidplay >= 1.36.59,x264 >= 20091020
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gst-plugins-ugly: gst-plugins-ugly (GStreamer streaming media framework "ugly" plug-ins)
gst-plugins-ugly:
gst-plugins-ugly: This package contains well-written GStreamer plug-ins that can't be
gst-plugins-ugly: shipped in gstreamer-plugins-good because:
gst-plugins-ugly: - the license is not LGPL
gst-plugins-ugly: - the license of the library is not LGPL
gst-plugins-ugly: - there are possible licensing issues with the code.
gst-plugins-ugly:
gst-plugins-ugly: http://gstreamer.freedesktop.org/
gst-plugins-ugly:
gst-plugins-ugly: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  gst-python-0.10.19-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  239 K
PACKAGE SIZE (uncompressed):  1330 K
PACKAGE REQUIRED:  gstreamer >= 0.10.23,gst-plugins-base >= 0.10.23,pygtk >= 2.14.1,python >= 2.6.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gst-python: gst-python (Python bindings for GStreamer)
gst-python:
gst-python: This module contains a wrapper that allows GStreamer applications
gst-python: to be written in Python.
gst-python:
gst-python: http://gstreamer.freedesktop.org/
gst-python:
gst-python:
gst-python: Packager: vl70@vector.linux.net on 26-Mar-2011
gst-python:
gst-python:

PACKAGE NAME:  gstreamer-0.10.32-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1122 K
PACKAGE SIZE (uncompressed):  10610 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gstreamer: GStreamer (streaming multimedia framework)
gstreamer: 
gstreamer: GStreamer is a library that allows the construction of graphs of a
gstreamer: media-handling components, ranging from simple Ogg/Vorbis playback 
gstreamer: to complex audio (mixing) and video (non-linear editing) processing.
gstreamer: Applications can take advantage of advances in codec and filter 
gstreamer: technology transparently. Developers can add new codecs and filters
gstreamer: by writing a simple plugin with a clean, generic interface.
gstreamer: 
gstreamer: GStreamer is released under the LGPL.
gstreamer: 

PACKAGE NAME:  gtk+-1.2.10-x86_64-5.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1022 K
PACKAGE SIZE (uncompressed):  6250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtk+: gtk+ (graphical user interface toolkit, version 1.x)
gtk+:
gtk+: GTK+, which stands for the Gimp ToolKit, is a library for creating
gtk+: graphical user interfaces for the X Window System.
gtk+:
gtk+: This library has been largely replaced by GTK+ version 2, but there
gtk+: are still some good programs that require it.
gtk+:
gtk+:
gtk+:
gtk+:

PACKAGE NAME:  gtk+2-2.24.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  6385 K
PACKAGE SIZE (uncompressed):  50020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtk+2: GTK+ version 2 (multi-platform GUI toolkit)
gtk+2:
gtk+2: This is GTK+, a multi-platform toolkit for creating graphical user
gtk+2: interfaces.  Offering a complete set of widgets, GTK+ is suitable for
gtk+2: projects ranging from small one-off projects to complete application
gtk+2: suites.
gtk+2:
gtk+2:
gtk+2:
gtk+2:
gtk+2:

PACKAGE NAME:  gtk-engines-2.20.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  420 K
PACKAGE SIZE (uncompressed):  2380 K
PACKAGE REQUIRED:  gtk+2 >= 2.16.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtk-engines: gtk-engines (Theme engines for GTK+ 2.0)
gtk-engines:
gtk-engines: The gtk-engines package contains shared objects and configuration
gtk-engines: files that implement a number of GTK+ theme engines. Theme engines
gtk-engines: provide different looks for GTK+, some of which resemble other
gtk-engines: toolkits or operating systems.
gtk-engines:
gtk-engines: ftp://ftp.gnome.org/pub/GNOME/sources/gtk-engines
gtk-engines:
gtk-engines:
gtk-engines: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  gtk-murrine-engine-0.98.1.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  89 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  cairo >= 1.8.6,gtk+2 >= 2.16.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtk-murrine-engine|-----handy-ruler------------------------------------------------------|
gtk-murrine-engine: gtk-murrine-engine (Murrine GTK2 engine)
gtk-murrine-engine:
gtk-murrine-engine: Murrine is a cairo-based fast gtk2 theme engine.
gtk-murrine-engine:
gtk-murrine-engine: http://www.cimitan.com/murrine/
gtk-murrine-engine:
gtk-murrine-engine:
gtk-murrine-engine: Packager: vl70@vector.linux.net on 14-Feb-2011
gtk-murrine-engine:
gtk-murrine-engine:
gtk-murrine-engine:

PACKAGE NAME:  gtkglext-1.2.0-x86_64-7vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  188 K
PACKAGE SIZE (uncompressed):  1760 K
PACKAGE REQUIRED:  glib2 >= 2.20.1,gtk+2 >= 2.16.1,mesa >= 7.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkglext: gtkglext (OpenGL Extension to GTK)
gtkglext:
gtkglext: GtkGLExt is an OpenGL extension to GTK. It provides the GDK objects
gtkglext: which support OpenGL rendering in GTK, and GtkWidget API add-ons to
gtkglext: make GTK+ widgets OpenGL-capable.
gtkglext:
gtkglext: http://gtkglext.sourceforge.net/
gtkglext:
gtkglext:
gtkglext: Packager: vl70@vector.linux.net on 14-Feb-2011
gtkglext:

PACKAGE NAME:  gtkmathview-0.8.0-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  551 K
PACKAGE SIZE (uncompressed):  3290 K
PACKAGE REQUIRED:  glib2 >= 2.18.1,gtk+2 >= 2.14.3,libxml2 >= 2.6.32,libxslt >= 1.1.24,popt >= 1.14 
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkmathview|-----handy-ruler------------------------------------------------------|
gtkmathview: gtkmathview (A MathML rendering library)
gtkmathview:
gtkmathview: GtkMathView is a C++ rendering engine for MathML documents. 
gtkmathview: It provides an interactive view that can be used for browsing 
gtkmathview: and editing MathML markup.
gtkmathview:
gtkmathview: http://helm.cs.unibo.it/mml-widget/
gtkmathview:
gtkmathview:
gtkmathview: Packager: vl70@vector.linux.net on 14-Feb-2011
gtkmathview:

PACKAGE NAME:  gtkmm-2.24.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  8050 K
PACKAGE SIZE (uncompressed):  62120 K
PACKAGE REQUIRED:  atkmm >= 2.22.0,cairomm >= 1.8.0,glibmm >= 2.20.0,gtk+2 >= 2.16.0,pangomm >= 2.24.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkmm: gtkmm (C++ interface for GTK2)
gtkmm:
gtkmm: gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps
gtkmm: GTK+ 2. Highlights include typesafe callbacks, widgets extensible via
gtkmm: inheritance and a comprehensive set of widget classes that can be
gtkmm: freely combined to quickly create complex user interfaces.
gtkmm:
gtkmm: http://gtkmm.sourceforge.net/
gtkmm:
gtkmm:
gtkmm: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  gtkspell-2.0.16-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  34 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkspell: gtkspell (GTK2 spell checker interface library)
gtkspell:
gtkspell: GtkSpell provides MSWord/MacOSX-style highlighting of misspelled words
gtkspell: in a GtkTextView widget.  Right-clicking a misspelled word pops up a
gtkspell: menu of suggested replacements.
gtkspell:
gtkspell:
gtkspell:
gtkspell:
gtkspell:
gtkspell:

PACKAGE NAME:  gvfs-1.6.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  832 K
PACKAGE SIZE (uncompressed):  5520 K
PACKAGE REQUIRED:  avahi >= 0.6.24,bluez >= 4.34,dbus-glib >= 0.80,expat >= 2.0.1,fuse >= 2.7.4,gconf >= 2.26.0,gnome-keyring >= 2.26.1,glib2 >= 2.20.1,libarchive >= 2.6.2,libcdio >= 0.81,libgphoto2 >= 2.4.3,libimobiledevice >= 1.0.2,libsoup >= 2.26.1,samba >= 3.2.10,udev >= 146
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gvfs|-----handy-ruler------------------------------------------------------|
gvfs: gvfs (Backends for the gio framework in GLib)
gvfs:
gvfs: The gvfs package provides backend implementations for the gio 
gvfs: framework in GLib. It includes ftp, sftp, cifs. 
gvfs:
gvfs: http://www.gtk.org
gvfs:
gvfs:
gvfs: Packager: vl70@vector.linux.net on 25-Mar-2011
gvfs:
gvfs:

PACKAGE NAME:  hal-0.5.14-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  487 K
PACKAGE SIZE (uncompressed):  2650 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hal: hal (The HAL Hardware Abstraction Layer)
hal:
hal: HAL is a piece of software that provides a view of the various
hal: hardware attached to a system.  HAL keeps detailed metadata for each
hal: piece of hardware and provides hooks so that system and desktop
hal: software can react to changes in the hardware configuration (such as
hal: the insertion of a DVD, or a USB flash memory stick).
hal:
hal: For more info, see:  http://hal.freedesktop.org/
hal:
hal:

PACKAGE NAME:  hal-info-20091130-noarch-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hal-info: hal-info (device information for HAL)
hal-info:
hal-info: The hal-info package contains device information for HAL, a Hardware
hal-info: Abstraction Layer.
hal-info:
hal-info: For more info, see:  http://www.freedesktop.org/Software/hal
hal-info:
hal-info:
hal-info:
hal-info:
hal-info:

PACKAGE NAME:  hicolor-icon-theme-0.12-noarch-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  11 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hicolor-icon-theme: hicolor-icon-theme (default icon theme)
hicolor-icon-theme:
hicolor-icon-theme: This is the default fallback theme used by implementations of the icon
hicolor-icon-theme: theme specification.  
hicolor-icon-theme:
hicolor-icon-theme: The specification is available at:
hicolor-icon-theme:   http://www.freedesktop.org/standards/icon-theme-spec/
hicolor-icon-theme:
hicolor-icon-theme:
hicolor-icon-theme:
hicolor-icon-theme:

PACKAGE NAME:  hunspell-1.2.9-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  229 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hunspell: hunspell (spell checker and morphological analyzer library)
hunspell:
hunspell: Hunspell is a spell checker and morphological analyzer library
hunspell: and program designed for languages with rich morphology
hunspell: and complex word compounding or character encoding.
hunspell: Hunspell interfaces: Ispell-like terminal interface using Curses
hunspell: library, Ispell pipe interface, OpenOffice.org UNO module.
hunspell:
hunspell:
hunspell: Home page: http://hunspell.sourceforge.net/
hunspell:

PACKAGE NAME:  hyphen-2.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  59 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
hyphen: hyphen (A text hyphenation library)
hyphen:
hyphen: Hyphen is a library for high quality hyphenation and justification.
hyphen:
hyphen: http://hunspell.sf.net
hyphen:
hyphen:
hyphen: Packager: vl70@vector.linux.net on 26-Mar-2011
hyphen:
hyphen:
hyphen:

PACKAGE NAME:  icu4c-4.7.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  4507 K
PACKAGE SIZE (uncompressed):  22870 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,gcc >= 4.5.2,glibc-solibs >= 2.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
icu4c: icu4c (International Components for Unicode)
icu4c:
icu4c: The International Components for Unicode (ICU) libraries provide
icu4c: robust and full-featured Unicode services on a wide variety of
icu4c: platforms.
icu4c:
icu4c:
icu4c: License: GPL
icu4c: Authors: 
icu4c: Website: http://www.icu-project.org/

PACKAGE NAME:  id3lib-3.8.3-x86_64-5vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  504 K
PACKAGE SIZE (uncompressed):  1480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
id3lib: id3lib (Library for manipulating ID3v1 and ID3v2 tags)
id3lib:
id3lib: This package provides a software library for manipulating ID3v1 and
id3lib: ID3v2 tags. It provides a convenient interface for software
id3lib: developers to include standards-compliant ID3v1/2 tagging
id3lib: capabilities in their applications. Features include identification
id3lib: of valid tags, automatic size conversions, (re)synchronisation of
id3lib: tag frames, seamless tag (de)compression, and optional padding
id3lib: facilities. Additionally, it can tell mp3 header info, like bitrate
id3lib: etc.                                 http://id3lib.sourceforge.net/
id3lib: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  ilmbase-1.0.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  100 K
PACKAGE SIZE (uncompressed):  950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ilmbase: ilmbase (Industrial Light & Magic base libraries)
ilmbase:
ilmbase: ilmbase currently includes:
ilmbase:
ilmbase: IlmThread - a thread abstraction library
ilmbase: Imath - a math function library
ilmbase: Iex - an excpetion-handling library
ilmbase: Half - Ilm's 16 bit floating point format library
ilmbase:
ilmbase: Homepage:  http://www.openexr.org/
ilmbase:

PACKAGE NAME:  imlib-1.9.15-x86_64-7.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  456 K
PACKAGE SIZE (uncompressed):  1560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
imlib: imlib (image loading and rendering library)
imlib:
imlib: Imlib is a display depth-independent image loading and rendering
imlib: library.  Imlib is designed to simplify and speed up the process of
imlib: loading images and obtaining X Window System drawables.  Imlib
imlib: provides many simple manipulation routines which can be used for
imlib: common operations.
imlib:
imlib:
imlib:
imlib:

PACKAGE NAME:  imlib2-1.4.4-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  198 K
PACKAGE SIZE (uncompressed):  770 K
PACKAGE REQUIRED:  bzip2 >= 1.0.5,freetype >= 2.3.7,libid3tag >= 0.15.1b,libpng >= 1.4.0,libjpeg >= 8,libtiff >= 3.9.2,giflib >= 4.1.6,libX11 >= 1.1.99.2,libXext >= 1.0.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
imlib2: imlib2 (Image loading, saving, rendering, and manipulation library)
imlib2:
imlib2: Imlib 2 is a library that does image file loading and saving as well
imlib2: as rendering, manipulation, arbitrary polygon support, etc. It does
imlib2: ALL of these operations FAST. Imlib2 also tries to be highly
imlib2: intelligent about doing them, so writing naive programs can be done
imlib2: easily, without sacrificing speed. This is a complete rewrite over
imlib2: the Imlib 1.x series. The architecture is more modular, simple, and
imlib2: flexible.
imlib2: http://www.enlightenment.org/Libraries/Imlib2/
imlib2: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  iso-codes-3.24.2-noarch-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1679 K
PACKAGE SIZE (uncompressed):  12490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
iso-codes: iso-codes (ISO-standard lists)
iso-codes:
iso-codes: This package provides lists of various ISO standards (e.g.
iso-codes: country, language, language scripts, and currency names) in one
iso-codes: place, rather than repeated in many programs throughout the system.
iso-codes:
iso-codes: Homepage: http://pkg-isocodes.alioth.debian.org/
iso-codes:
iso-codes:
iso-codes:
iso-codes:

PACKAGE NAME:  jasper-1.900.1-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  154 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
jasper: jasper (free implementation of the JPEG-2000 standard)
jasper:
jasper: The JasPer Project is an open-source initiative to provide a free
jasper: software-based reference implementation of the codec specified in the
jasper: JPEG-2000 Part-1 standard (i.e., ISO/IEC 15444-1).jasper:
jasper:
jasper:
jasper:
jasper: jasper home: http://www.ece.uvic.ca/~mdadams/jasper/
jasper:

PACKAGE NAME:  jre-6u24-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  19434 K
PACKAGE SIZE (uncompressed):  88360 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
jre: Java(TM) 2 Platform Standard Edition Runtime Environment.
jre:
jre: The J2SE(TM) Runtime Environment (JRE) is intended for software
jre: developers and vendors to redistribute with their applications.
jre: It contains the Java virtual machine, runtime class libraries, and
jre: Java application launcher that are necessary to run programs written
jre: in the Java programming language.
jre:
jre: If you need development tools, obtain the jdk from /extra, or see the
jre: web page:   http://java.com/
jre:

PACKAGE NAME:  ladspa-1.13-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  40 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ladspa: ladspa (LADSPA SDK, example plug-ins and tools)
ladspa:
ladspa: There is a large number of synthesis packages in use or development
ladspa: on the Linux platform at this time. The Linux Audio Developer's
ladspa: Simple Plugin API (LADSPA) attempts to give programmers the ability
ladspa: to write simple `plugin' audio processors in C/C++ and link them
ladspa: dynamically against a range of host applications.
ladspa:
ladspa: http://www.ladspa.org/
ladspa:
ladspa: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  lame-3.98.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  335 K
PACKAGE SIZE (uncompressed):  1240 K
PACKAGE REQUIRED:  ncurses >= 5.7
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lame: LAME (LAME Ain't an MP3 Encoder)
lame:
lame: LAME is an LGPL MP3 encoder.  The open source development model
lame: allowed the authors to improve its quality and speed since 1999.
lame: It is now a highly evolved MP3 encoder, with quality and speed
lame: able to rival state-of-the-art commercial encoders.
lame:
lame: Homepage: http://sourceforge.net/projects/lame
lame:
lame:
lame: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  lcms-1.19-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  174 K
PACKAGE SIZE (uncompressed):  670 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lcms: lcms (little cms engine)
lcms:
lcms: Little cms is a small, speed optimized color management engine.
lcms:
lcms: lcms was written by Marti Maria <marti@littlecms.com>.
lcms:
lcms:
lcms:
lcms:
lcms:
lcms:

PACKAGE NAME:  libao-1.1.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  50 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libao: libao (Audio Output library)
libao:
libao: Libao is a cross-platform audio library, and is required by many
libao: programs and other libraries that use audio (some examples include
libao: ogg123, GAIM, and the Ogg Vorbis libraries).  This package provides
libao: plugins for OSS, ESD, aRts, and ALSA.  You will need to install the
libao: supporting libraries for any plugins you want to use.
libao:
libao:
libao:
libao:

PACKAGE NAME:  libarchive-2.8.4-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  227 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libarchive: libarchive (archive reading library)
libarchive:
libarchive: Libarchive is a programming library that can create and read
libarchive: several different streaming archive formats, including most
libarchive: popular TAR variants and several CPIO formats.  It can also
libarchive: write SHAR archives.
libarchive:
libarchive: Homepage:  http://libarchive.googlecode.com
libarchive:
libarchive:
libarchive:

PACKAGE NAME:  libart_lgpl-2.3.21-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  75 K
PACKAGE SIZE (uncompressed):  430 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libart_lgpl: libart_lgpl (graphics library)
libart_lgpl:
libart_lgpl: Libart is a library for high-performance 2D graphics.  It is used by
libart_lgpl: both KDE and GNOME.  This is the LGPL'd component of the library.
libart_lgpl:
libart_lgpl: Raph Levien <raph@acm.org> is the author of libart.
libart_lgpl:
libart_lgpl:
libart_lgpl:
libart_lgpl:
libart_lgpl:

PACKAGE NAME:  libatasmart-0.17-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  38 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  udev >= 141
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libatasmart: libatasmart (ATA S.M.A.R.T. Disk Health Monitoring Library)
libatasmart:
libatasmart: A small and lightweight parser library for ATA S.M.A.R.T. hard disk
libatasmart: health monitoring.
libatasmart:
libatasmart: http://git.0pointer.de/?p=libatasmart.git;a=summary
libatasmart:
libatasmart:
libatasmart: Packager: vl70@vector.linux.net on 26-Mar-2011
libatasmart:
libatasmart:

PACKAGE NAME:  libavc1394-0.5.3-x86_64-6vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  40 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:

PACKAGE NAME:  libbonobo-2.24.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  789 K
PACKAGE SIZE (uncompressed):  4790 K
PACKAGE REQUIRED:  dbus-glib >= 0.80,libxml2 >= 2.7.3,orbit2 >= 2.14.17
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libbonobo: libbonobo (Bonobo component system)
libbonobo:
libbonobo: Bonobo is a component system based on CORBA, used by the GNOME
libbonobo: desktop.
libbonobo:
libbonobo: http://ftp.gnome.org
libbonobo:
libbonobo:
libbonobo: Packager: vl70@vector.linux.net on 17-Feb-2011
libbonobo:
libbonobo:

PACKAGE NAME:  libbonoboui-2.24.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  461 K
PACKAGE SIZE (uncompressed):  2830 K
PACKAGE REQUIRED:  glib2 >= 2.18.4,libart_lgpl >= 2.3.19,libbonobo >= 2.24.1,libglade >= 2.6.3,libgnome >= 2.24.1,libgnomecanvas >= 2.24.0,libxml2 >= 2.7.3,orbit2 >= 2.14.14
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libbonoboui: libbonoboui (Bonobo user interface components)
libbonoboui:
libbonoboui: Bonobo is a component system based on CORBA, used by the GNOME
libbonoboui: desktop. libbonoboui contains the user interface related components
libbonoboui: that come with Bonobo.
libbonoboui:
libbonoboui: http://ftp.gnome.org
libbonoboui:
libbonoboui:
libbonoboui: Packager: vl70@vector.linux.net on 17-Feb-2011
libbonoboui:

PACKAGE NAME:  libburn-1.0.0.pl00-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  262 K
PACKAGE SIZE (uncompressed):  1940 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libburn: libburn (Library for reading, mastering and writing optical discs)
libburn:
libburn: Libburn is an open-source library for reading, mastering and writing
libburn: optical discs. For now this means only CD-R and CD-RW.
libburn: The project comprises of several more or less interdependent parts
libburn: which together strive to be a usable foundation for application
libburn: development. These are libraries, language bindings, and middleware
libburn: binaries which emulate classical (and valuable) Linux tools.
libburn:
libburn: http://libburnia.pykix.org/
libburn: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libcaca-0.99.beta16-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  422 K
PACKAGE SIZE (uncompressed):  3100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcaca: libcaca (Colour AsCii Art library)
libcaca:
libcaca: The libcaca library is a graphics library that outputs text instead
libcaca: of pixels, so that it can work on older video cards or text terminals.
libcaca: It is not unlike the famous AAlib library.
libcaca:
libcaca: Sam Hocevar is the main author of libcaca.
libcaca:
libcaca:
libcaca:
libcaca:

PACKAGE NAME:  libcanberra-0.25-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  81 K
PACKAGE SIZE (uncompressed):  430 K
PACKAGE REQUIRED:  alsa-lib >= 1.0.19,gconf >= 2.24.0,gstreamer >= 0.10.22,gtk+2 >= 2.14.7,libvorbis >= 1.2.0,pulseaudio >= 0.9.13,sound-theme-freedesktop
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcanberra|-----handy-ruler------------------------------------------------------|
libcanberra: libcanberra (Portable Sound Event Library)
libcanberra:
libcanberra: A small and lightweight implementation of the XDG Sound Theme
libcanberra: Specification (http://0pointer.de/public/sound-theme-spec.html).
libcanberra:
libcanberra: http://git.0pointer.de/?p=libcanberra.git;a=summary
libcanberra:
libcanberra:
libcanberra: Packager: vl70@vector.linux.net on 14-Feb-2011
libcanberra:
libcanberra:

PACKAGE NAME:  libcap-2.20-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  51 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcap: libcap (get/set POSIX capabilities)
libcap:
libcap: This is a library for getting and setting POSIX.1e (formerly POSIX 6)
libcap: draft 15 capabilities.
libcap:
libcap: Libcap was written by Andrew G. Morgan; however, it would not
libcap: have been possible without the help of Aleph1, Roland Buresund,
libcap: Andrew Main, and Alexander Kjeldaas.
libcap:
libcap:
libcap:

PACKAGE NAME:  libcdaudio-0.99.12p2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcdaudio: libcdaudio (Control operation of a CD-ROM when playing audio CDs)
libcdaudio:
libcdaudio: libcdaudio is a library designed to provide functions to control
libcdaudio: operation of a CD-ROM when playing audio CDs. It also contains
libcdaudio: functions for CDDB and CD Index lookup.
libcdaudio:
libcdaudio: http://libcdaudio.sourceforge.net/
libcdaudio:
libcdaudio:
libcdaudio: Packager: vl70@vector.linux.net on 14-Feb-2011
libcdaudio:

PACKAGE NAME:  libcddb-1.3.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  67 K
PACKAGE SIZE (uncompressed):  320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcddb: libcddb (An online CD database library)
libcddb:
libcddb: Libcddb is a library that implements the different protocols (CDDBP,
libcddb: HTTP, SMTP) to access data on a CDDB server (http://freedb.org).
libcddb:
libcddb: Visit the project at:  http://libcddb.sourceforge.net/
libcddb:
libcddb:
libcddb:
libcddb:
libcddb:

PACKAGE NAME:  libcdio-0.79-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  274 K
PACKAGE SIZE (uncompressed):  1060 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcdio: libcdio (GNU CD access library)
libcdio:
libcdio: The libcdio package contains a library for CD-ROM and CD image access.
libcdio: Applications wishing to be oblivious of the OS and device-dependent
libcdio: properties of a CD-ROM or of the specific details of various CD-image
libcdio: formats may benefit from using this library.  A library for working
libcdio: with ISO-9660 filesystems libiso9660 is included.  A generic interface
libcdio: for issuing MMC (multimedia commands) is also part of the libcdio
libcdio: library.
libcdio:
libcdio:

PACKAGE NAME:  libcfg+-0.6.2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  77 K
PACKAGE SIZE (uncompressed):  500 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libcfg+|-----handy-ruler------------------------------------------------------|
libcfg+: libcfg+ (Command line and configuration file parsing library)
libcfg+:
libcfg+: libcfg+ is a C library that features multi- command line and
libcfg+: configuration file parsing. It is possible to set up various special
libcfg+: properties such as quoting characters, deliminator strings, file
libcfg+: comment prefixes, multi-line postfixes, and more. It supports many
libcfg+: data types such as booleans, integers, decimal numbers, strings with
libcfg+: many additional data type flags (such as multiple values for a single
libcfg+: option).
libcfg+: http://platon.sk/projects/main_page.php?project_id=3
libcfg+: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libdaemon-0.14-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  27 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdaemon: libdaemon (library for writing UNIX daemons)
libdaemon:
libdaemon: libdaemon is a lightweight C library which eases the writing of UNIX
libdaemon: daemons.
libdaemon:
libdaemon: http://0pointer.de/lennart/projects/libdaemon/
libdaemon:
libdaemon:
libdaemon: Packager: root@vector.linux.net on 26-Feb-2011
libdaemon:
libdaemon:

PACKAGE NAME:  libdc1394-2.1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  191 K
PACKAGE SIZE (uncompressed):  1480 K
PACKAGE REQUIRED:  libraw1394 >= 2.02,libusb1 >= 1.0.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdc1394|-----handy-ruler------------------------------------------------------|
libdc1394: libdc1394 (1394-based digital camera control library)
libdc1394:
libdc1394: Libdc1394 is a library that is intended to provide a high level
libdc1394: programming interface for application developers who wish to control
libdc1394: IEEE 1394 based cameras that conform to the 1394-based Digital Camera
libdc1394: Specification.
libdc1394:
libdc1394: http://sourceforge.net/projects/libdc1394/
libdc1394:
libdc1394:
libdc1394: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libdca-0.0.5-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  106 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdca: libdca (DTS Coherent Acoustics decoder library)
libdca:
libdca: libdca is a free library for decoding DTS Coherent Acoustics streams.
libdca: It is released under the terms of the GPL license. The DTS Coherent
libdca: Acoustics standard is used in a variety of applications, including
libdca: DVD, DTS audio CD and radio broadcasting.
libdca:
libdca: http://developers.videolan.org/libdca.html
libdca:
libdca:
libdca: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libdv-1.0.0-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  112 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  gtk+2 >= 2.18.6,libpng >= 1.4.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdv: libdv (Software decoder for DV format video)
libdv:
libdv: The Quasar DV codec (libdv) is a software codec for DV video, the
libdv: encoding format used by most digital camcorders, typically those that
libdv: support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. libdv
libdv: was developed according to the official standards for DV video:
libdv: IEC 61834 and SMPTE 314M.
libdv:
libdv: http://libdv.sourceforge.net/
libdv:
libdv: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libdvdcss-1.2.10-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  27 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdvdcss: libdvdcss (Transparent DVD device access with CSS decryption)
libdvdcss:
libdvdcss: libdvdcss is a cross-platform library for transparent DVD device
libdvdcss: access with on-the-fly CSS decryption.
libdvdcss: It is used by libdvdread and most DVD players such as VLC because of
libdvdcss: its portability and because, unlike similar libraries, it does not
libdvdcss: require your DVD drive to be region locked.
libdvdcss:
libdvdcss: http://www.videolan.org/developers/libdvdcss.html
libdvdcss:
libdvdcss: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libdvdnav-4.1.3-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  53 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  libdvdread >= 4.1.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdvdnav: libdvdnav (A library for reading DVD video discs based on Ogle code)
libdvdnav:
libdvdnav: libdvdnav provides a simple library for reading DVD video discs.
libdvdnav: The code is based on Ogle and used in, among others, the Xine dvdnav
libdvdnav: plug-in.
libdvdnav:
libdvdnav: http://dvd.sourceforge.net/
libdvdnav:
libdvdnav:
libdvdnav: Packager: vl70@vector.linux.net on 14-Feb-2011
libdvdnav:

PACKAGE NAME:  libdvdplay-1.0.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  libdvdread >= 4.1.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdvdplay: libdvdplay (A library providing low-level functions for DVD reading)
libdvdplay:
libdvdplay: libdvdplay is a cross-platform layer over libdvdread that provides
libdvdplay: low-level functions for DVD reading and seeking, as well as access to
libdvdplay: the DVD data (subtitles, languages, chapters). It also provides the
libdvdplay: virtual machine required for DVD navigation to the client application.
libdvdplay:
libdvdplay: http://developers.videolan.org/libdvdplay/
libdvdplay:
libdvdplay:
libdvdplay: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libdvdread-4.1.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  68 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdvdread: libdvdread (library for reading DVDs)
libdvdread:
libdvdread: libdvdread provides a simple foundation for reading DVD video
libdvdread: disks.  It provides the functionality that is required to access
libdvdread: many DVDs.  It parses IFO files, reads NAV-blocks, and performs
libdvdread: CSS authentication and descrambling.
libdvdread:
libdvdread:
libdvdread:
libdvdread:
libdvdread:

PACKAGE NAME:  libev-4.04-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  117 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libev: libev (A full-featured and high-performance event loop)
libev: A full-featured and high-performance event loop
libev: loosely modelled after . It is used, among others, in the GNU
libev: Virtual Private Ethernet and rxvt-unicode packages, and in the 
libev: Deliantra MORPG Server and Client.
libev: 
libev:
libev:
libev: License: http://cvs.schmorp.de/libev/LICENSE?revision=1.8&view=markup
libev: Authors: Marc Lehmann and Emanuele Giaquinta.
libev: Website: http://software.schmorp.de/pkg/libev

PACKAGE NAME:  libexif-0.6.20-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  299 K
PACKAGE SIZE (uncompressed):  1850 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libexif: libexif (Exchangeable Image File Format library)
libexif:
libexif: EXIF stands for Exchangeable Image File Format, which is a format used
libexif: to store extra information in images such as the JPEG files produced
libexif: by digital cameras.  The libexif library allows programs such as 
libexif: gthumb to parse, edit, and save EXIF data.
libexif:
libexif:
libexif:
libexif:
libexif:

PACKAGE NAME:  libffi-3.0.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  58 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libffi|-----handy-ruler------------------------------------------------------|
libffi: libffi (A portable foreign function interface library)
libffi:
libffi: A portable foreign function interface library
libffi:
libffi: http://sourceware.org/libffi
libffi:
libffi:
libffi: Packager: vl70@vector.linux.net on 14-Feb-2011
libffi:
libffi:
libffi:

PACKAGE NAME:  libgee-0.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  99 K
PACKAGE SIZE (uncompressed):  460 K
PACKAGE REQUIRED:  glib2 >= 2.22.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgee|-----handy-ruler------------------------------------------------------|
libgee: libgee (GObject collection library)
libgee:
libgee: libgee is a collection library providing GObject-based interfaces and
libgee: classes for commonly used data structures.
libgee:
libgee: http://live.gnome.org/Libgee
libgee:
libgee:
libgee: Packager: vl70@vector.linux.net on 14-Feb-2011
libgee:
libgee:

PACKAGE NAME:  libgexiv2-0.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  50 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  exiv2 >= 0.20
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgexiv2|-----handy-ruler------------------------------------------------------|
libgexiv2: libgexiv2 (Gexiv2 is a GObject-based wrapper around the Exiv2 library)
libgexiv2:
libgexiv2: libgexiv2 is a GObject-based wrapper around the Exiv2 library. It
libgexiv2: makes the basic features of Exiv2 available to GNOME applications.
libgexiv2:
libgexiv2: http://trac.yorba.org/wiki/gexiv2
libgexiv2:
libgexiv2:
libgexiv2: Packager: vl70@vector.linux.net on 14-Feb-2011
libgexiv2:
libgexiv2:

PACKAGE NAME:  libgexiv2-0.2.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  49 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  exiv2 >= 0.20
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgexiv2: libgexiv2 (Gexiv2 is a GObject-based wrapper around the Exiv2 library)
libgexiv2:
libgexiv2: libgexiv2 is a GObject-based wrapper around the Exiv2 library. It
libgexiv2: makes the basic features of Exiv2 available to GNOME applications.
libgexiv2:
libgexiv2: http://trac.yorba.org/wiki/gexiv2
libgexiv2:
libgexiv2:
libgexiv2: Packager: vl70@vector.linux.net on 26-Mar-2011
libgexiv2:
libgexiv2:

PACKAGE NAME:  libglade-2.6.4-x86_64-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  86 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libglade: libglade (GLADE library)
libglade:
libglade: The GLADE library allows loading user interfaces which are stored
libglade: externally into a program.  This allows the interface to be changed
libglade: without recompiling the program.  The interfaces can also be edited
libglade: with GLADE.
libglade:
libglade:
libglade:
libglade:
libglade:

PACKAGE NAME:  libgnome-2.30.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1269 K
PACKAGE SIZE (uncompressed):  6350 K
PACKAGE REQUIRED:  bluecurve-icon-theme,esound >= 0.2.41,gconf >= 2.26.0,glib2 >= 2.20.0,gnome-vfs >= 2.24.1,libbonobo >= 2.24.1,libxml2 >= 2.7.3,libxslt >= 1.1.24,orbit2 >= 2.14.17
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgnome: libgnome (GNOME base library)
libgnome:
libgnome: GNOME (GNU Network Object Model Environment) is a user-friendly set
libgnome: of GUI applications and desktop tools to be used in conjunction with
libgnome: a window manager for the X Window System. The libgnome package
libgnome: includes non-GUI-related libraries that are needed to run GNOME. The
libgnome: libgnomeui package contains X11-dependent GNOME library features.
libgnome:
libgnome: ftp://ftp.gnome.org
libgnome:
libgnome: Packager: vl70@vector.linux.net on 17-Feb-2011

PACKAGE NAME:  libgnome-keyring-2.32.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  900 K
PACKAGE REQUIRED:  dbus >= 1.2.24,glib2 >= 2.24.0,libtasn1 >= 2.5,libgcrypt >= 1.4.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgnome-keyring|-----handy-ruler------------------------------------------------------|
libgnome-keyring: libgnome-keyring (Framework for managing passwords and other secrets)
libgnome-keyring:
libgnome-keyring: gnome-keyring is a program that keep password and other secrets for
libgnome-keyring: users. The library libgnome-keyring is used by applications to
libgnome-keyring: integrate with the gnome-keyring system.
libgnome-keyring:
libgnome-keyring: http://live.gnome.org/GnomeKeyring
libgnome-keyring:
libgnome-keyring:
libgnome-keyring: Packager: vl70@vector.linux.net on 25-Feb-2011
libgnome-keyring:

PACKAGE NAME:  libgnomecanvas-2.30.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  237 K
PACKAGE SIZE (uncompressed):  1800 K
PACKAGE REQUIRED:  glib2 >= 2.20.0,gtk+2 >= 2.16.0,libart_lgpl >= 2.3.19,libglade >= 2.6.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgnomecanvas: libgnomecanvas (GnomeCanvas widget)
libgnomecanvas:
libgnomecanvas: The canvas widget allows you to create custom displays using stock
libgnomecanvas: items such as circles, lines, text, and so on. It was originally a
libgnomecanvas: port of the Tk canvas widget but has evolved quite a bit over time.
libgnomecanvas:
libgnomecanvas: http://www.gnome.org/
libgnomecanvas:
libgnomecanvas:
libgnomecanvas: Packager: vl70@vector.linux.net on 14-Feb-2011
libgnomecanvas:

PACKAGE NAME:  libgnomeui-2.24.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  858 K
PACKAGE SIZE (uncompressed):  6680 K
PACKAGE REQUIRED:  gconf >= 2.24.0,glib2 >= 2.18.4,gnome-vfs >= 2.24.0,gvfs >= 1.0.3,libart_lgpl >= 2.3.19,libbonobo >= 2.24.1,libbonoboui >= 2.24.1,libglade >= 2.6.3,libgnome-keyring >= 2.30.0,libgnome >= 2.24.1,libgnomecanvas >= 2.24.0,libxml2 >= 2.7.3,pango >= 1.22.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgnomeui: libgnomeui (GNOME base GUI library)
libgnomeui:
libgnomeui: GNOME (GNU Network Object Model Environment) is a user-friendly set
libgnomeui: of GUI applications and desktop tools to be used in conjunction with
libgnomeui: a window manager for the X Window System. The libgnomeui package
libgnomeui: includes GUI-related libraries that are needed to run GNOME. (The
libgnomeui: libgnome package includes the library features that do not use the X
libgnomeui: Window System.)
libgnomeui:
libgnomeui: ftp://ftp.gnome.org
libgnomeui: Packager: vl70@vector.linux.net on 17-Feb-2011

PACKAGE NAME:  libgphoto2-2.4.10.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1036 K
PACKAGE SIZE (uncompressed):  6360 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgphoto2: libgphoto2 (Digital Camera Library)
libgphoto2:
libgphoto2: libgphoto2 is a library that can be used by
libgphoto2: applications to access various digital cameras.
libgphoto2:
libgphoto2: Homepage: http://www.gphoto.org/
libgphoto2:
libgphoto2:
libgphoto2:
libgphoto2:
libgphoto2:

PACKAGE NAME:  libgpod-0.8.0-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  288 K
PACKAGE SIZE (uncompressed):  1570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgpod: libgpod (A library for connecting to some sort of media device ;-)
libgpod:
libgpod: libgpod for accessing iPod content. It provides an easy to use way
libgpod: to retrieve the list of files and playlist stored on an iPod, to
libgpod: modify them and to save them back to the iPod.
libgpod:
libgpod: If you decide to make improvements please contact us so we can work
libgpod: together. Just drop a mail to:  Gtkpod-devel@lists.sourceforge.net
libgpod: (you may ask to be CC in the answer).
libgpod:
libgpod:

PACKAGE NAME:  libgsf-1.14.19-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  221 K
PACKAGE SIZE (uncompressed):  1960 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgsf: libgsf (structured file I/O library)
libgsf:
libgsf: libgsf aims to provide an efficient extensible I/O abstraction for
libgsf: dealing with different structured file formats.
libgsf:
libgsf: libgsf is used by libwv2, which is used by various word processors
libgsf: to import .doc format files.
libgsf:
libgsf:
libgsf:
libgsf:

PACKAGE NAME:  libgtop-2.28.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  188 K
PACKAGE SIZE (uncompressed):  1620 K
PACKAGE REQUIRED:  glib2 >= 2.26.1-x86_64-2,glibc-solibs >= 2.13-x86_64-1,libXau >= 1.0.6-x86_64-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgtop: libgtop (System Information Library)
libgtop:
libgtop: libgtop is a library that fetches information about the running system
libgtop: such as cpu and memory usage, active processes etc. The information is
libgtop: taken directly from the /proc filesystem.
libgtop:
libgtop:
libgtop: License: GPL
libgtop: Authors: 
libgtop: Website: gnome.org

PACKAGE NAME:  libid3tag-0.15.1b-x86_64-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libid3tag: libid3tag (ID3 tag manipulation library)
libid3tag:
libid3tag: libid3tag is a library for reading and (eventually) writing ID3 tags,
libid3tag: both ID3v1 and the various versions of ID3v2.
libid3tag:
libid3tag: libid3tag was written by Robert Leslie.
libid3tag:
libid3tag:
libid3tag:
libid3tag:
libid3tag:

PACKAGE NAME:  libidl-0.8.14-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  86 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libidl: libIDL (IDL library)
libidl:
libidl: libIDL is a library licensed under the GNU LGPL for creating trees of
libidl: CORBA Interface Definition Language (IDL) files, which is a
libidl: specification for defining portable interfaces.
libidl:
libidl: libIDL is used by SeaMonkey and the Mozilla Suite.
libidl:
libidl:
libidl:
libidl:

PACKAGE NAME:  libidn-1.19-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  282 K
PACKAGE SIZE (uncompressed):  1330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libidn: libidn (GNU Internationalized Domain Name library)
libidn:
libidn: GNU Libidn is an implementation of the Stringprep, Punycode and IDNA
libidn: specifications defined by the IETF Internationalized Domain Names
libidn: (IDN) working group, used for internationalized domain names.
libidn:
libidn:
libidn:
libidn:
libidn:
libidn:

PACKAGE NAME:  libieee1284-0.2.11-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  74 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libieee1284: libieee1284 (parallel port library)
libieee1284:
libieee1284: This library is intended to be used by applications that need to
libieee1284: communicate with (or at least identify) devices that are attached via
libieee1284: a parallel port.  For example, SANE uses it to identify scanners.
libieee1284:
libieee1284:
libieee1284:
libieee1284:
libieee1284:
libieee1284:

PACKAGE NAME:  libisofs-1.0.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  283 K
PACKAGE SIZE (uncompressed):  2460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libisofs: libisofs (Library to create ISO 9660 disk images)
libisofs:
libisofs: Libisofs is a library to pack up hard disk files and directories into
libisofs: a ISO 9660 disk image. This may then be burned to CD via libburn.
libisofs:
libisofs: http://libburnia.pykix.org/
libisofs:
libisofs:
libisofs: Packager: vl70@vector.linux.net on 26-Mar-2011
libisofs:
libisofs:

PACKAGE NAME:  libjpeg-8a-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  184 K
PACKAGE SIZE (uncompressed):  820 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libjpeg: libjpeg (Independent JPEG Group's JPEG software)
libjpeg:
libjpeg: Software to implement JPEG image compression and decompression.  JPEG
libjpeg: (pronounced 'jay-peg') is a standardized compression method for
libjpeg: full-color and gray-scale images.  JPEG is intended for compressing
libjpeg: 'real-world' scenes; cartoons and other non-realistic images are not
libjpeg: its strong suit.  JPEG is lossy, however, on typical images of
libjpeg: real-world scenes, very good compression levels can be obtained with
libjpeg: no visible change, and amazingly high compression levels are possible
libjpeg: if you can tolerate a low-quality image.
libjpeg: http://www.ijg.org/

PACKAGE NAME:  liblastfm-0.3.3_f0b3239-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  146 K
PACKAGE SIZE (uncompressed):  700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
liblastfm: liblastfm (last fm library)
liblastfm: 
liblastfm: The last.fm audio scrobbling service library.
liblastfm: 
liblastfm: 
liblastfm: 
liblastfm: 
liblastfm: 
liblastfm: 
liblastfm: 
liblastfm: 

PACKAGE NAME:  libmad-0.15.1b-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  69 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmad: libmad (high-quality MPEG audio library)
libmad:
libmad: MAD (libmad) is a high-quality MPEG audio decoder.  It currently
libmad: supports MPEG-1 and the MPEG-2 extension to Lower Sampling
libmad: Frequencies, as well as the so-called MPEG 2.5 format.  All three
libmad: audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are
libmad: fully implemented.  Because MAD provides full 24-bit PCM output,
libmad: applications using MAD are able to produce high quality audio.
libmad: MAD is distributed under the terms of the GPL.
libmad:
libmad: MAD (libmad) was written by Robert Leslie.

PACKAGE NAME:  libmcs-0.7.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmcs: libmcs (A library for managing configuration settings)
libmcs:
libmcs: mcs is a library and set of userland tools which abstract the
libmcs: storage of configuration settings away from userland applications.
libmcs:
libmcs: It is hoped that by using mcs, that the applications which use it
libmcs: will generally have a more congruent feeling in regards to settings.
libmcs:
libmcs: Because mcs is licenced under the BSD license, it is hoped that
libmcs: many applications will adopt its use.
libmcs:

PACKAGE NAME:  libmikmod-3.2.0.beta2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  162 K
PACKAGE SIZE (uncompressed):  460 K
PACKAGE REQUIRED:  esound >= 0.2.38
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmikmod|-----handy-ruler------------------------------------------------------|
libmikmod: libmikmod (A MOD music file player library)
libmikmod:
libmikmod: libmikmod is a library used by the mikmod MOD music file player for
libmikmod: UNIX-like systems. Supported file formats include MOD, STM, S3M, MTM,
libmikmod: XM, ULT and IT.
libmikmod:
libmikmod: http://mikmod.raphnet.net/
libmikmod:
libmikmod:
libmikmod: Packager: vl70@vector.linux.net on 14-Feb-2011
libmikmod:

PACKAGE NAME:  libmms-0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmms: libmms (Library for Microsoft Media Server (MMS) streaming protocol)
libmms:
libmms: MMS is a proprietary streaming protocol used in Microsoft server
libmms: products, commonly used to stream WMV data.  You can encounter
libmms: mms:// style URLs all over the net, especially on news sites and
libmms: other content-serving sites. Libmms allows you to download content
libmms: from such sites, making it easy to add MMS support to your media
libmms: applications.
libmms: http://libmms.sourceforge.net/
libmms:
libmms: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libmng-1.0.10-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  206 K
PACKAGE SIZE (uncompressed):  840 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmng: libmng (Multiple-image Network Graphics library)
libmng:
libmng: This is libmng, the MNG reference library.  MNG (pronounced 'ming'),
libmng: is short for Multiple-image Network Graphics.  Designed with the same
libmng: modular philosophy as PNG and by many of the same people, MNG is
libmng: intended to provide a home for all of the multi-image (animation)
libmng: capabilities that have no place in PNG.  
libmng:
libmng: libmng was written by Gerard Juyn.
libmng:
libmng:

PACKAGE NAME:  libmodman-2.0.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmodman|-----handy-ruler------------------------------------------------------|
libmodman: libmodman (A simple library for managing C++ modules (plug-ins))
libmodman:
libmodman: libmodman is a simple library for managing C++ modules (plug-ins).
libmodman:
libmodman: http://code.google.com/p/libmodman/
libmodman:
libmodman:
libmodman: Packager: vl70@vector.linux.net on 14-Feb-2011
libmodman:
libmodman:
libmodman:

PACKAGE NAME:  libmowgli-0.7.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmowgli: libmowgli (A useful collection of routines for programming)
libmowgli:
libmowgli: libmowgli is a class library containing performance and usability
libmowgli: oriented extensions to C.
libmowgli:
libmowgli: libmowgli was written by Patrick McFarland, William Pitcock,
libmowgli: Jonathan Schleifer, Pippijn van Steenhoven, and Jilles Tjoelker.
libmowgli:
libmowgli:
libmowgli:
libmowgli:

PACKAGE NAME:  libmp4v2-1.9.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  383 K
PACKAGE SIZE (uncompressed):  1460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmp4v2: libmp4v2 (Lib for working with files using the mp4 container format)
libmp4v2:
libmp4v2: The libmp4v2 library provides an abstraction layer for working with
libmp4v2: files using the mp4 container format. This library is developed by
libmp4v2: mpeg4ip project and is an exact copy of the library distributed in
libmp4v2: the mpeg4ip package.
libmp4v2:
libmp4v2: http://code.google.com/p/mp4v2
libmp4v2:
libmp4v2:
libmp4v2: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libmpc-0.8.2-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  68 K
PACKAGE SIZE (uncompressed):  360 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmpc: libmpc (Multiple Precision Complex Library)
libmpc:
libmpc: mpc is a complex floating-point library with exact rounding.  It is
libmpc: based on the GNU MPFR floating-point library (http://www.mpfr.org/),
libmpc: which is itself based on the GNU MP library (http://gmplib.org/).
libmpc:
libmpc: Homepage:  http://www.multiprecision.org
libmpc:
libmpc:
libmpc:
libmpc:

PACKAGE NAME:  libmpcdec-1.2.6-x86_64-5vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmpcdec: libmpcdec (Portable Musepack SV7 decoder library)
libmpcdec:
libmpcdec: Musepack is an audio compression format with a strong emphasis on
libmpcdec: high quality. It's not lossless, but it is designed for transparency,
libmpcdec: so that you won't be able to hear differences between the original
libmpcdec: wave file and the much smaller MPC file.
libmpcdec: libmpcdec has replaced the older libmusepack.
libmpcdec:
libmpcdec: Homepage: http://www.musepack.net/
libmpcdec:
libmpcdec: Packager: vl70@vector.linux.net on 22-Feb-2011

PACKAGE NAME:  libmpeg2-0.5.1-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  89 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmpeg2: libmpeg2 (MPEG-2 decoder library and program)
libmpeg2:
libmpeg2: libmpeg2 is a free library for decoding MPEG-2 and MPEG-1 video
libmpeg2: streams. It is released under the terms of the GPL license.
libmpeg2:
libmpeg2: http://libmpeg2.sourceforge.net/
libmpeg2:
libmpeg2:
libmpeg2: Packager: vl70@vector.linux.net on 14-Feb-2011
libmpeg2:
libmpeg2:

PACKAGE NAME:  libmtp-1.0.1-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  238 K
PACKAGE SIZE (uncompressed):  2710 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmtp: libmtp (A library for MTP media devices)
libmtp:
libmtp: libmtp is a library that attempts to support Microsoft's Media
libmtp: Transfer Protocol (MTP).  It was initially based on the great libptp2
libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and
libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2
libmtp: based on libgphoto?).  It is like a master DJ has remixed all of
libmtp: these tracks and then added a new API adapted for portable media
libmtp: players.  :-)
libmtp:
libmtp: For the latest info, check out:  http://libmtp.sourceforge.net

PACKAGE NAME:  libmusicbrainz-2.1.5-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  87 K
PACKAGE SIZE (uncompressed):  310 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmusicbrainz|-----handy-ruler------------------------------------------------------|
libmusicbrainz: libmusicbrainz (Library for accessing MusicBrainz servers)
libmusicbrainz:
libmusicbrainz: The MusicBrainz client library allows applications to make metadata
libmusicbrainz: lookup to a MusicBrainz server, generate signatures from WAV data and
libmusicbrainz: create CD Index Disk ids from audio CD roms.
libmusicbrainz:
libmusicbrainz: http://www.musicbrainz.org/
libmusicbrainz:
libmusicbrainz:
libmusicbrainz: Packager: vl70@vector.linux.net on 14-Feb-2011
libmusicbrainz:

PACKAGE NAME:  libnice-0.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  162 K
PACKAGE SIZE (uncompressed):  1210 K
PACKAGE REQUIRED:  gstreamer >= 0.10.24,gstreamer-plugins-base >= 0.10.24,gupnp-igd >= 0.1.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libnice: libnice (GLib ICE implementation)
libnice:
libnice: libnice is an implementation of the IETF's draft Interactive
libnice: Connectivity Establishment standard (ICE).
libnice:
libnice: http://nice.freedesktop.org/wiki/
libnice:
libnice:
libnice: Packager: vl70@vector.linux.net on 26-Mar-2011
libnice:
libnice:

PACKAGE NAME:  libnl-1.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  116 K
PACKAGE SIZE (uncompressed):  500 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libnl: libnl (netlink socket library)
libnl:
libnl: libnl is a library for applications dealing with netlink sockets.
libnl: The library provides an interface for raw netlink messaging and
libnl: various netlink family specific interfaces.
libnl: 
libnl: Homepage: http://people.suug.ch/~tgr/libnl/
libnl:
libnl: 
libnl: 
libnl: 

PACKAGE NAME:  libnotify-0.5.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libnotify: libnotify (notification library)
libnotify: 
libnotify: A general library for event notification
libnotify:
libnotify: Homepage: http://www.galago-project.org/news/index.php
libnotify:
libnotify:
libnotify:
libnotify:
libnotify:
libnotify:

PACKAGE NAME:  libnut-20110213-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  56 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libnut|-----handy-ruler------------------------------------------------------|
libnut: libnut (Library and tools to create NUT multimedia files)
libnut:
libnut: NUT is a free multimedia container format for storage of audio, video,
libnut: subtitles and related user defined streams, it provides exact
libnut: timestamps for synchronization and seeking, is simple, has low
libnut: overhead and can recover in case of errors in the stream.
libnut:
libnut: http://svn.mplayerhq.hu/nut/
libnut:
libnut:
libnut: Packager: root@vector.linux.net on 13-Feb-2011

PACKAGE NAME:  libogg-1.2.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  70 K
PACKAGE SIZE (uncompressed):  400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libogg: libogg (Ogg Bitstream library)
libogg:
libogg: Libogg is a library for manipulating ogg bitstreams.  It handles
libogg: both making ogg bitstreams and getting packets from ogg bitstreams.
libogg:
libogg: libogg is needed to use the Ogg Vorbis audio format.
libogg:
libogg:
libogg:
libogg:
libogg:

PACKAGE NAME:  liboil-0.3.17-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  158 K
PACKAGE SIZE (uncompressed):  1690 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
liboil: liboil (a library of simple functions)
liboil:
liboil: Liboil is a library of simple functions that are optimized for 
liboil: various CPUs.  These functions are generally loops implementing 
liboil: simple algorithms, such as converting an array of N integers to 
liboil: floating-point numbers or multiplying and summing an array of N 
liboil: numbers.  Such functions are candidates for significant optimization 
liboil: using various techniques, especially by using extended instructions 
liboil: provided by modern CPUs (Altivec, MMX, SSE, etc.).
liboil:
liboil:

PACKAGE NAME:  libpcap-1.1.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  233 K
PACKAGE SIZE (uncompressed):  950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libpcap: libpcap (packet capture library)
libpcap:
libpcap: libpcap is a library for user-level packet capture.  libpcap provides
libpcap: a portable framework for low-level network monitoring.  Applications
libpcap: include network statistics collection, security monitoring, network
libpcap: debugging, etc.  The tcpdump utility uses libpcap.
libpcap:
libpcap: Project homepage:  http://sourceforge.net/projects/libpcap/
libpcap:
libpcap:
libpcap:

PACKAGE NAME:  libplist-1.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  97 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libplist: libplist (A library for Apple Binary and XML Property Lists) 
libplist:
libplist: libplist is a library that attempts to support Apple Binary and XML
libplist: Property Lists.  It is used by libgpod.
libplist:
libplist: The libplist homepage:  http://www.libimobiledevice.org/
libplist:
libplist:
libplist:
libplist:
libplist:

PACKAGE NAME:  libpng-1.4.5-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  549 K
PACKAGE SIZE (uncompressed):  3580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libpng: libpng (Portable Network Graphics library)
libpng:
libpng: PNG (Portable Network Graphics) is an extensible file format for the
libpng: lossless, portable, well-compressed storage of raster images.  PNG
libpng: provides a patent-free replacement for GIF and can also replace many
libpng: common uses of TIFF.  Indexed-color, grayscale, and truecolor images
libpng: are supported, plus an optional alpha channel.  Sample depths range
libpng: from 1 to 16 bits.
libpng:
libpng:
libpng:

PACKAGE NAME:  libproxy-0.4.6-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  84 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  dbus >= 1.2.12,libmodman >= 1.0.1,python >= 2.6.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libproxy: libproxy (A library handling all the details of proxy configuration)
libproxy:
libproxy: libproxy is a library that provides automatic proxy configuration
libproxy: management. 
libproxy:
libproxy: http://code.google.com/p/libproxy/
libproxy:
libproxy:
libproxy: Packager: vl70@vector.linux.net on 26-Mar-2011
libproxy:
libproxy:

PACKAGE NAME:  libraw-0.10.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  134 K
PACKAGE SIZE (uncompressed):  630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libraw|-----handy-ruler------------------------------------------------------|
libraw: libraw (Raw image decoder library)
libraw:
libraw: LibRaw is a library for reading RAW files obtained from digital photo
libraw: cameras (CRW/CR2, NEF, RAF, DNG, and others).
libraw:
libraw: http://www.libraw.org/
libraw:
libraw:
libraw: Packager: vl70@vector.linux.net on 14-Feb-2011
libraw:
libraw:

PACKAGE NAME:  libraw1394-2.0.7-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libraw1394: libraw1394 (user space IEEE 1394 driver)
libraw1394:
libraw1394: libraw1394 provides direct access to the IEEE 1394 bus through
libraw1394: the Linux 1394 subsystem's raw1394 user space interface.
libraw1394:
libraw1394: Homepage:  http://www.kernel.org/pub/linux/libs/ieee1394/
libraw1394:
libraw1394:
libraw1394:
libraw1394:
libraw1394:

PACKAGE NAME:  librsvg-2.32.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  146 K
PACKAGE SIZE (uncompressed):  700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
librsvg: librsvg (SVG library)
librsvg:
librsvg: Library for handling SVG (Scalable Vector Graphics).
librsvg:
librsvg:
librsvg:
librsvg:
librsvg:
librsvg:
librsvg:
librsvg:

PACKAGE NAME:  libsamplerate-0.1.7-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  970 K
PACKAGE SIZE (uncompressed):  1660 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libsamplerate: libsamplerate (a Sample Rate Converter for audio)
libsamplerate:
libsamplerate: Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for
libsamplerate: audio.  One example of where such a thing would be useful is
libsamplerate: converting audio from the CD sample rate of 44.1kHz to the 48kHz
libsamplerate: sample rate used by DAT players.  SRC is capable of arbitrary and time
libsamplerate: varying conversions.  SRC provides a small set of converters to allow
libsamplerate: quality to be traded off against computation cost.
libsamplerate:
libsamplerate: libsamplerate home: http://www.mega-nerd.com/SRC/
libsamplerate:

PACKAGE NAME:  libsexy-0.1.11-x86_64-5vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  58 K
PACKAGE SIZE (uncompressed):  310 K
PACKAGE REQUIRED:  enchant >= 1.3.0,gtk+2 >= 2.12.8,libxml2 >= 2.6.31
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libsexy: libsexy (Funky fresh graphical widgets for GTK+ 2)
libsexy:
libsexy: libsexy is a collection of GTK+ widgets that extend the functionality
libsexy: of such standard widgets as GtkEntry and GtkLabel by subclassing
libsexy: them and working around the limitations of the widgets.
libsexy:
libsexy: http://www.chipx86.com/wiki/Libsexy
libsexy:
libsexy:
libsexy: Packager: vl70@vector.linux.net on 14-Feb-2011
libsexy:

PACKAGE NAME:  libshout-2.2.2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  libogg >= 1.1.3,libtheora >= 1.0beta3,libvorbis >= 1.2.0,speex >= 1.2.beta3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libshout: libshout (icecast source streaming library)
libshout:
libshout: libshout is a library for communicating with and sending data to an
libshout: icecast server. It handles the socket connection, the timing of the
libshout: data, and prevents most bad data from getting to the icecast server.
libshout:
libshout: http://www.icecast.org/
libshout:
libshout:
libshout: Packager: vl70@vector.linux.net on 14-Feb-2011
libshout:

PACKAGE NAME:  libsigc++-2.2.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  2904 K
PACKAGE SIZE (uncompressed):  11490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libsigc++: libsigc++ (Typesafe signal framework for C++)
libsigc++:
libsigc++: This library implements a full callback system for use in widget
libsigc++: libraries, abstract interfaces, and general programming. Originally
libsigc++: part of the Gtk-- widget set, libsigc++ is now a seperate library to
libsigc++: provide for more general use.
libsigc++:
libsigc++: http://libsigc.sourceforge.net/
libsigc++:
libsigc++:
libsigc++: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libsndfile-1.0.23-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  233 K
PACKAGE SIZE (uncompressed):  860 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libsndfile: libsndfile (C library for reading and writing wav files)
libsndfile:
libsndfile: Libsndfile is a C library for reading and writing files containing
libsndfile: sampled sound (such as MS Windows WAV and Apple/SGI AIFF format).
libsndfile:
libsndfile: Homepage:  http://www.mega-nerd.com/libsndfile/
libsndfile:
libsndfile:
libsndfile:
libsndfile:
libsndfile:

PACKAGE NAME:  libsoup-2.33.90-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  343 K
PACKAGE SIZE (uncompressed):  2880 K
PACKAGE REQUIRED:  glib2 >= 2.20.1,glib-networking >= 2.28.0,libgnome-keyring >= 2.32.0,libproxy >= 0.2.3,libxml2 >= 2.7.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libsoup: libsoup (Soup, an HTTP library implementation)
libsoup:
libsoup: Libsoup is an HTTP library implementation in C. It was originally
libsoup: part of a SOAP (Simple Object Access Protocol) implementation called
libsoup: Soup, but the SOAP and non-SOAP parts have now been split into
libsoup: separate packages.
libsoup:
libsoup: ftp://ftp.gnome.org/pub/gnome/sources/libsoup/
libsoup:
libsoup:
libsoup: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libtalloc-2.0.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  34 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtalloc|-----handy-ruler------------------------------------------------------|
libtalloc: libtalloc (The talloc library)
libtalloc:
libtalloc: A library that implements a hierarchical allocator with destructors.
libtalloc:
libtalloc: http://talloc.samba.org/
libtalloc:
libtalloc:
libtalloc: Packager: vl70@vector.linux.net on 14-Feb-2011
libtalloc:
libtalloc:
libtalloc:

PACKAGE NAME:  libtasn1-2.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  120 K
PACKAGE SIZE (uncompressed):  400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtasn1: Libtasn1
libtasn1:
libtasn1: This is the ASN.1 library used in GNUTLS.
libtasn1:
libtasn1: http://josefsson.org/libtasn1/
libtasn1:
libtasn1:
libtasn1: Packager: vl70@vector.linux.net on 14-Feb-2011
libtasn1:
libtasn1:
libtasn1:

PACKAGE NAME:  libtheora-1.1.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  178 K
PACKAGE SIZE (uncompressed):  810 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtheora: libtheora (Theora video codec library)
libtheora:
libtheora: Theora is Xiph.Org's first publicly released video codec, intended
libtheora: for use within the Foundation's Ogg multimedia streaming system.
libtheora:
libtheora: The Theora bitstream format was frozen after the alpha3 release. This
libtheora: means that files produced by the alpha3 encoder will always be
libtheora: playable according to the Theora I specification.  Traditionally
libtheora: alpha means a proof of concept, not a production-ready release. 
libtheora: However the code is very robust, ready for and indeed in general use.
libtheora:

PACKAGE NAME:  libtiff-3.9.4-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  459 K
PACKAGE SIZE (uncompressed):  1830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtiff: libtiff (a library for reading and writing TIFF files)
libtiff:
libtiff: This package provides support for the Tag Image File Format (TIFF),
libtiff: a widely used format for storing image data.  Included is the libtiff
libtiff: library (for reading and writing TIFF files), and a collection of
libtiff: tools for working with TIFF images.
libtiff:
libtiff:
libtiff:
libtiff:
libtiff:

PACKAGE NAME:  libusb-1.0.8-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  63 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libusb: libusb (USB library)
libusb:
libusb: This is libusb, a library which allows userspace application access
libusb: to USB devices.  It is used to connect to USB devices like scanners.
libusb: http://libusb.org/wiki/Libusb1.0
libusb:
libusb: This package also contains libusb-compat for the "old" libusb users.
libusb: http://libusb.org/wiki/LibusbCompat0.1
libusb:
libusb:
libusb:

PACKAGE NAME:  libv4l-0.6.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libv4l: libv4l (Collection of video4linux support libraries)
libv4l:
libv4l: libv4l is a collection of libraries which adds a thin abstraction
libv4l: layer on top of video4linux2 devices. The purpose of this (thin) layer
libv4l: is to make it easy for application writers to support a wide variety
libv4l: of devices without having to write separate code for different devices
libv4l: in the same class. libv4l consists of 3 different libraries:
libv4l: libv4lconvert, libv4l1 and libv4l2.
libv4l:
libv4l: http://hansdegoede.livejournal.com/3636.html
libv4l: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libvisual-0.4.0-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  124 K
PACKAGE SIZE (uncompressed):  570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libvisual: libvisual (audio visualization library)
libvisual:
libvisual: Libvisual is an audio visualization library that acts as a middle
libvisual: layer between audio visualization plugins and applications.  Any
libvisual: application written with libvisual support included will be able to
libvisual: make use of all the plugins that are written for libvisual.
libvisual: Libvisual also contains a whole set of facilities to ease the
libvisual: development of plugins.
libvisual:
libvisual: Libvisual was written by Dennis Smit.
libvisual:

PACKAGE NAME:  libvisual-plugins-0.4.0-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  215 K
PACKAGE SIZE (uncompressed):  1080 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libvisual-plugins: libvisual-plugins (plugins for the libvisual library)
libvisual-plugins:
libvisual-plugins: By itself, libvisual only provides a framework to build upon.  The
libvisual-plugins: plugins in this package are designed to work with libvisual to allow
libvisual-plugins: it to actually do all sorts of interesting visualizations based on
libvisual-plugins: metrics gathered as players process audio information data.  Plugins
libvisual-plugins: can be mixed (more than one run at a time), or morphed from one to
libvisual-plugins: another.  Other special effects are possible as well.
libvisual-plugins:
libvisual-plugins: Several authors have contributed libvisual-plugins under the GPL.
libvisual-plugins:

PACKAGE NAME:  libvorbis-1.3.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  301 K
PACKAGE SIZE (uncompressed):  3810 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libvorbis: libvorbis (Ogg Vorbis library)
libvorbis:
libvorbis: This library supports the Vorbis General Audio Compression Codec
libvorbis: (commonly known as Ogg Vorbis).  Ogg Vorbis is a fully open,
libvorbis: non-proprietary, patent-and-royalty-free, general-purpose compressed
libvorbis: audio format for audio and music at fixed and variable bitrates.
libvorbis:
libvorbis: The libvorbis library requires libao and libogg.  You'll find some
libvorbis: basic tools for creating and using Ogg Vorbis files in the
libvorbis: vorbis-tools package.
libvorbis:

PACKAGE NAME:  libvpx-0.9.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  185 K
PACKAGE SIZE (uncompressed):  620 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libvpx|-----handy-ruler------------------------------------------------------|
libvpx: libvpx (VP8 Video Codec SDK)
libvpx:
libvpx: libvpx provides the VP8 SDK, which allows you to integrate your
libvpx: applications with the VP8 video codec, a high quality, royalty free,
libvpx: open source codec deployed on millions of computers and devices
libvpx: worldwide.
libvpx:
libvpx: http://webm.googlecode.com/
libvpx:
libvpx:
libvpx: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  libwmf-0.2.8.4-x86_64-5.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  734 K
PACKAGE SIZE (uncompressed):  1620 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libwmf: libwmf (WMF graphics format library)
libwmf:
libwmf: libwmf is a library for interpreting metafile images and either
libwmf: displaying them using X or converting them to standard formats such
libwmf: as PNG, JPEG, PS, EPS and SVG.
libwmf:
libwmf:
libwmf:
libwmf:
libwmf:
libwmf:

PACKAGE NAME:  libwnck-2.30.6-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  351 K
PACKAGE SIZE (uncompressed):  2900 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libwnck: libwnck (Window Navigator Construction Kit library)
libwnck:
libwnck: libwnck is the Window Navigator Construction Kit, a library for use
libwnck: in writing pagers, tasklists, and more generally applications that
libwnck: are dealing with window management.  It tries hard to respect the
libwnck: Extended Window Manager Hints specification (EWMH).
libwnck:
libwnck: libwnck is used by compiz to provide the gtk-window-decorator program.
libwnck:
libwnck:
libwnck:

PACKAGE NAME:  libwpd-0.9.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  874 K
PACKAGE SIZE (uncompressed):  13540 K
PACKAGE REQUIRED:  glib2 >= 2.22.4,libgsf >= 1.14.16
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libwpd: libwpd (WordPerfect document format library)
libwpd:
libwpd: This package contains a library (libwpd) and tools to transform
libwpd: WordPerfect documents into other formats such as HTML, text, and raw.
libwpd:
libwpd: libwpd is used by word processors such as KWord.
libwpd:
libwpd: http://libwpd.sf.net/
libwpd:
libwpd:
libwpd: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  libwpg-0.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  148 K
PACKAGE SIZE (uncompressed):  1630 K
PACKAGE REQUIRED:  libwpd >= 0.8.14
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libwpg: libwpg (Library for reading WordPerfect Graphics images)
libwpg:
libwpg: Libwpg project is a library and to work with graphics in WPG 
libwpg:(WordPerfect Graphics) format. WPG is the format used among others
libwpg: in Corel sofware, such as WordPerfect and Presentations.
libwpg:
libwpg: http://libwpg.sourceforge.net/
libwpg:
libwpg:
libwpg: Packager: vl70@vector.linux.net on 26-Mar-2011
libwpg:

PACKAGE NAME:  libwvstreams-4.6.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1121 K
PACKAGE SIZE (uncompressed):  8990 K
PACKAGE REQUIRED:  dbus >= 1.2.16,openssl >= 0.9.8g | openssl-solibs >= 0.9.8g
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libwvstreams: libwvstreams (A network programming library written in C++)
libwvstreams:
libwvstreams: WvStreams aims to be an efficient, secure, and easy-to-use library
libwvstreams: for doing network applications development.
libwvstreams:
libwvstreams: http://alumnit.ca/wiki/?WvStreams
libwvstreams:
libwvstreams:
libwvstreams: Packager: vl70@vector.linux.net on 26-Mar-2011
libwvstreams:
libwvstreams:

PACKAGE NAME:  libxdg-basedir-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  11 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxdg-basedir: libxdg-basedir (XDG specification higher level functions)
libxdg-basedir: The XDG Base Directory Specification defines where should user files 
libxdg-basedir: be looked for by defining one or more base directories relative in 
libxdg-basedir: with they should be located. This library implements functions to
libxdg-basedir: list the directories according to the specification and provides a
libxdg-basedir: few higher-level functions.
libxdg-basedir:
libxdg-basedir: License: MIT License
libxdg-basedir: Authors: Mark Nevill
libxdg-basedir: Website: http://n.ethz.ch/~nevillm/download/libxdg-basedir/

PACKAGE NAME:  libxklavier-5.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  77 K
PACKAGE SIZE (uncompressed):  490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxklavier: libxklavier (XKB Library)
libxklavier:
libxklavier: libxklavier is a utility library to make XKB stuff easier.
libxklavier:
libxklavier: Homepage:  http://www.freedesktop.org/wiki/Software/LibXklavier
libxklavier:
libxklavier:
libxklavier:
libxklavier:
libxklavier:
libxklavier:

PACKAGE NAME:  libxml2-2.7.8-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1371 K
PACKAGE SIZE (uncompressed):  11490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxml2: libxml2 (XML parser library)
libxml2:
libxml2: Libxml2 is the XML C parser library and toolkit.  XML itself is a
libxml2: metalanguage to design markup languages  -- i.e. a text language where
libxml2: structures are added to the content using extra "markup" information
libxml2: enclosed between angle brackets.  HTML is the most well-known markup
libxml2: language.  Though the library is written in C, a variety of language
libxml2: bindings make it available in other environments.
libxml2:
libxml2:
libxml2:

PACKAGE NAME:  libxslt-1.1.26-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  401 K
PACKAGE SIZE (uncompressed):  3120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxslt: libxslt (XML transformation library)
libxslt:
libxslt: XSLT support for libxml2.  (XSLT is a language used for transforming
libxslt: XML documents)
libxslt:
libxslt:
libxslt:
libxslt:
libxslt:
libxslt:
libxslt:

PACKAGE NAME:  link-grammar-4.6.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  433 K
PACKAGE SIZE (uncompressed):  1750 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
link-grammar|-----handy-ruler------------------------------------------------------|
link-grammar: link-grammar (A Grammar Checking library)
link-grammar:
link-grammar: A library that can perform grammar checking.
link-grammar:
link-grammar: http://www.abisource.com/
link-grammar:
link-grammar:
link-grammar: Packager: vl70@vector.linux.net on 14-Feb-2011
link-grammar:
link-grammar:
link-grammar:

PACKAGE NAME:  lockdev-1.0.3-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lockdev|-----handy-ruler------------------------------------------------------|
lockdev: lockdev (A library for locking devices)
lockdev:
lockdev: Lockdev provides a reliable way to put an exclusive lock to devices
lockdev: using both FSSTND and SVr4 methods.
lockdev:
lockdev: http://packages.debian.org/unstable/source/lockdev
lockdev:
lockdev:
lockdev: Packager: vl70@vector.linux.net on 14-Feb-2011
lockdev:
lockdev:

PACKAGE NAME:  loudmouth-1.4.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  74 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
loudmouth: loudmouth (XMPP C programming library)
loudmouth:
loudmouth: Loudmouth is a lightweight and easy-to-use C library for programming
loudmouth: with the Jabber protocol.  It is designed to be easy to get started
loudmouth: with, and yet extensible enough to allow you to do anything that the
loudmouth: Jabber protocol allows.
loudmouth:
loudmouth: loudmouth home: http://www.loudmouth-project.org/
loudmouth:
loudmouth:
loudmouth:

PACKAGE NAME:  lzo-2.03-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  71 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lzo: lzo (LZO Compression Library)
lzo:
lzo: LZO is a portable lossless data compression library written in ANSI C.
lzo: It offers pretty fast compression and very fast decompression. 
lzo:
lzo: Homepage:  http://www.oberhumer.com/opensource/lzo/ 
lzo:
lzo:
lzo:
lzo:
lzo:

PACKAGE NAME:  meanwhile-1.0.2-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  298 K
PACKAGE SIZE (uncompressed):  3730 K
PACKAGE REQUIRED:  glib2 >= 2.16.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
meanwhile|-----handy-ruler------------------------------------------------------|
meanwhile: meanwhile (Lotus Sametime Community Client library)
meanwhile:
meanwhile: The heart of the Meanwhile Project is the Meanwhile library, providing
meanwhile: the basic Lotus Sametime session functionality along with the core
meanwhile: services; Presence Awareness, Instant Messaging, Multi-user
meanwhile: Conferencing, Preferences Storage, Identity Resolution, and File
meanwhile: Transfer.
meanwhile:
meanwhile: http://meanwhile.sourceforge.net
meanwhile:
meanwhile: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  mhash-0.9.9.9-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  118 K
PACKAGE SIZE (uncompressed):  510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mhash: mhash (Thread-safe hash library)
mhash:
mhash: mhash is a thread-safe hash library, implemented in C, and provides a
mhash: uniform interface to a large number of hash algorithms (MD5, SHA-1,
mhash: HAVAL, RIPEMD128, RIPEMD160, TIGER, GOST). These algorithms can be
mhash: used to compute checksums, message digests, and other signatures.
mhash: The HMAC support implements the basics for message authentication,
mhash: following RFC 2104.
mhash:
mhash:
mhash:

PACKAGE NAME:  mpfr-3.0.0p08-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  283 K
PACKAGE SIZE (uncompressed):  1440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mpfr: mpfr (Multiple-Precision Floating-Point Reliable Library)
mpfr:
mpfr: The MPFR library is a C library for multiple-precision floating-point
mpfr: computations with exact rounding (also called correct rounding).
mpfr: It is based on the GMP multiple-precision library.
mpfr: The main goal of MPFR is to provide a library for multiple-precision
mpfr: floating-point computation which is both efficient and has 
mpfr: well-defined semantics.  It copies the good ideas from the
mpfr: ANSI/IEEE-754 standard for double-precision floating-point arithmetic
mpfr: (53-bit mantissa).
mpfr:

PACKAGE NAME:  murrine-themes-0.53.1-noarch-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  147 K
PACKAGE SIZE (uncompressed):  1520 K
PACKAGE REQUIRED:  gtk-murrine-engine >= 0.53.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
murrine-themes: murrine-themes (Themes for gtk murrine engine)
murrine-themes:
murrine-themes: Themes for gtk2 murrine engine.
murrine-themes:
murrine-themes: http://www.cimitan.com/murrine/
murrine-themes:
murrine-themes:
murrine-themes: Packager: vl70@vector.Linux.net on 16-Jan-2011
murrine-themes:
murrine-themes:
murrine-themes:

PACKAGE NAME:  ncurses-5.8-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1058 K
PACKAGE SIZE (uncompressed):  8500 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ncurses: ncurses (CRT screen handling and optimization package)
ncurses:
ncurses: The ncurses (new curses) library is a free software emulation of
ncurses: curses in System V Release 4.0, and more.  It uses terminfo format,
ncurses: supports pads and color and multiple highlights and forms characters
ncurses: and function-key mapping, and has all the other SYSV-curses
ncurses: enhancements over BSD curses.
ncurses:
ncurses:
ncurses:
ncurses:

PACKAGE NAME:  neon-0.29.5-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  198 K
PACKAGE SIZE (uncompressed):  880 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
neon: neon (HTTP and WebDAV client library)
neon:
neon: neon is an HTTP and WebDAV client library, with a C language API.
neon: Bindings for other languages may also be available, see the web site
neon: for more details:  http://www.webdav.org/neon/
neon:
neon: The neon library is used by projects such as subversion.
neon:
neon:
neon:
neon:

PACKAGE NAME:  net-snmp-5.6.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1966 K
PACKAGE SIZE (uncompressed):  8270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
net-snmp: net-snmp (Simple Network Management Protocol tools)
net-snmp:
net-snmp: Various tools relating to the Simple Network Management Protocol:
net-snmp:
net-snmp: An extensible agent
net-snmp: An SNMP library
net-snmp: Tools to request or set information from SNMP agents
net-snmp: Tools to generate and handle SNMP traps
net-snmp: A version of the unix 'netstat' command using SNMP
net-snmp: A graphical Perl/Tk/SNMP based mib browser
net-snmp:

PACKAGE NAME:  netkit-rwho-0.17-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
netkit-rwho: netkit-rwho (who is logged in on local machines)
netkit-rwho:
netkit-rwho: The rwho command produces output similar to who, but for all machines
netkit-rwho: on the local network.  If no report has been received from a machine
netkit-rwho: for 11 minutes then rwho assumes the machine is down, and does not
netkit-rwho: report users last known to be logged into that machine.  If a users
netkit-rwho: hasn't typed to the system for a minute or more, then rwho reports
netkit-rwho: this idle time.  If a user hasn't typed to the system for an hour or
netkit-rwho: more, then the user will be omitted from the output of rwho unless
netkit-rwho: the -a flag is given.
netkit-rwho:

PACKAGE NAME:  netpbm-10.49.02-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1591 K
PACKAGE SIZE (uncompressed):  6270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
netpbm: netpbm (graphics conversion utilities)
netpbm:
netpbm: The netpbm package contains a library and tools for converting between
netpbm: many different graphics formats.
netpbm:
netpbm:
netpbm:
netpbm:
netpbm:
netpbm:
netpbm:

PACKAGE NAME:  notify-python-0.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
notify-python: notify-python (Python bindings for libnotify)
notify-python:
notify-python: The notify-python package contains bindings to use libnotify with
notify-python: Python programs.
notify-python:
notify-python: Homepage for notify-python:  http://www.galago-project.org/
notify-python:
notify-python:
notify-python:
notify-python:
notify-python:

PACKAGE NAME:  nspr-4.8.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  183 K
PACKAGE SIZE (uncompressed):  860 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nspr: nspr (Netscape Portable Runtime)
nspr:
nspr: NSPR provides platform independence for non-GUI operating system
nspr: facilities. These facilities include threads, thread synchronization,
nspr: normal file and network I/O, interval timing and calendar time, basic
nspr: memory management (malloc and free) and shared library linking.
nspr:
nspr: http://www.mozilla.org/projects/nspr/
nspr:
nspr:
nspr: Packager: vl70@vector.linux.net on 27-Mar-2011

PACKAGE NAME:  nss-3.12.9-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1547 K
PACKAGE SIZE (uncompressed):  8220 K
PACKAGE REQUIRED:  nspr >= 4.8.6,sqlite >= 3.6.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nss: nss (Network Security Services)
nss:
nss: Network Security Services (NSS) is a set of libraries designed to
nss: support cross-platform development of security-enabled client and
nss: server applications. Applications built with NSS can support SSL v2
nss: and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
nss: v3 certificates, and other security standards.
nss:
nss: http://www.mozilla.org/projects/security/pki/nss/
nss:
nss: Packager: vl70@vector.linux.net on 27-Mar-2011

PACKAGE NAME:  numpy-1.4.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1936 K
PACKAGE SIZE (uncompressed):  10300 K
PACKAGE REQUIRED:  fftw >= 3.1.2,lapack >= 3.1.1,python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
numpy|-----handy-ruler------------------------------------------------------|
numpy: numpy (A fast multidimensional array facility for Python)
numpy:
numpy: NumPy is a general-purpose array-processing package designed to
numpy: efficiently manipulate large multi-dimensional arrays of arbitrary
numpy: records without sacrificing too much speed for small multi-dimensional
numpy: arrays.
numpy:
numpy: http://numeric.scipy.org/
numpy:
numpy:
numpy: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  opencdk-0.6.6-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  96 K
PACKAGE SIZE (uncompressed):  350 K
PACKAGE REQUIRED:  libgcrypt >= 1.4.0,libgpg-error >= 1.6,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
opencdk: OpenCDK (Open Crypto Development)
opencdk:
opencdk: This library provides basic parts of the OpenPGP message format.
opencdk: The aim of the library is *not* to replace any available OpenPGP version.
opencdk: There will be no real support for key management (sign, revoke,
opencdk: alter preferences, ...) and some other parts are only rudimentary
opencdk: available. The main purpose is to handle and understand OpenPGP
opencdk: packets and to use basic operations. For example to encrypt/decrypt
opencdk: or to sign/verify and packet routines.
opencdk: http://www.gnu.org/software/gnutls/
opencdk: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  opencore-amr-0.1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  138 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
opencore-amr|-----handy-ruler------------------------------------------------------|
opencore-amr: opencore-amr (Implementation of AMR-NB and AMR-WB)
opencore-amr:
opencore-amr: Implementation of Adaptive Multi Rate Narrowband and Wideband speech
opencore-amr: codec.
opencore-amr:
opencore-amr: http://opencore-amr.sourceforge.net/
opencore-amr:
opencore-amr:
opencore-amr: Packager: vl70@vector.linux.net on 14-Feb-2011
opencore-amr:
opencore-amr:

PACKAGE NAME:  opencv-2.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  11325 K
PACKAGE SIZE (uncompressed):  43100 K
PACKAGE REQUIRED:  gstreamer >= 0.10.25,gtk+2 >= 2.18.5,jasper >= 1.900.1,libdc1394 >= 2.1.2,libjpeg >= 8,libpng >= 1.4.1,libraw1394 >= 2.0.4,libtiff >= 3.9.2,libvorbis >= 1.2.3,unicap >= 0.9.7
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
opencv|-----handy-ruler------------------------------------------------------|
opencv: opencv (Collection of algorithms for computer vision)
opencv:
opencv: OpenCV means Intel® Open Source Computer Vision Library. It is a
opencv: collection of C functions and a few C++ classes that implement some
opencv: popular Image Processing and Computer Vision algorithms.
opencv:
opencv: http://opencv.willowgarage.com/wiki/
opencv:
opencv:
opencv: Packager: vl70@vector.linux.net on 14-Feb-2011
opencv:

PACKAGE NAME:  openexr-1.7.0-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  2981 K
PACKAGE SIZE (uncompressed):  4320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openexr: openexr (HDR Image File Format & Library)
openexr:
openexr: OpenEXR is an image file format and library developed by Industrial
openexr: Light & Magic, and later released to the public.  It provides support
openexr: for high dynamic range and a 16-bit floating point "half" data type
openexr: which is compatible with the half data type in the Cg programming
openexr: language.
openexr:
openexr: Homepage: http://www.openexr.org/
openexr:
openexr:

PACKAGE NAME:  openjpeg-1.3-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  145 K
PACKAGE SIZE (uncompressed):  550 K
PACKAGE REQUIRED:  libtiff >= 3.8.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openjpeg|-----handy-ruler------------------------------------------------------|
openjpeg: openjpeg (OpenJPEG command line tools)
openjpeg:
openjpeg: OpenJPEG is an open-source JPEG 2000 codec written in C language. It
openjpeg: has been developed in order to promote the use of JPEG 2000, the new
openjpeg: still-image compression standard from the Joint Photographic Experts
openjpeg: Group (JPEG).
openjpeg:
openjpeg: http://www.openjpeg.org/
openjpeg:
openjpeg:
openjpeg: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  orc-0.4.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  128 K
PACKAGE SIZE (uncompressed):  1010 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
orc|-----handy-ruler------------------------------------------------------|
orc: orc (The Oild Runtime Compiler)
orc:
orc: Orc is a library and set of tools for compiling and executing very
orc: simple programs that operate on arrays of data.  The "language" is a
orc: generic assembly language that represents many of the features
orc: available in SIMD architectures, including saturated addition and
orc: subtraction, and many arithmetic operations.
orc:
orc: http://code.entropywave.com/projects/orc/
orc:
orc: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  ots-0.5.0-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  40 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  glib2 >= 2.16.1,libxml2 >= 2.6.31,popt >= 1.13
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ots|-----handy-ruler------------------------------------------------------|
ots: ots (A text summarizer)
ots:
ots: The open text summarizer is an open source tool for summarizing texts.
ots: The program reads a text and decides which sentences are important and
ots: which are not.
ots:
ots: http://libots.sourceforge.net/
ots:
ots:
ots: Packager: vl70@vector.linux.net on 14-Feb-2011
ots:

PACKAGE NAME:  pango-1.28.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  491 K
PACKAGE SIZE (uncompressed):  3530 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pango: pango (library for layout and rendering of text)
pango:
pango: Pango is a library for layout and rendering of text, with an emphasis
pango: on internationalization. Pango can be used anywhere that text layout
pango: is needed; however, most of the work on Pango was done using the GTK+
pango: widget toolkit as a test platform. Pango forms the core of text and
pango: font handling for GTK+-2.
pango:
pango:
pango:
pango:

PACKAGE NAME:  pangomm-2.27.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  508 K
PACKAGE SIZE (uncompressed):  3700 K
PACKAGE REQUIRED:  cairomm >= 1.8.0,glibmm >= 2.20.0,pango >= 1.24.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pangomm: pangomm (C++ interface for Pango)
pangomm:
pangomm: pangomm provides a C++ interface to the Pango library. Highlights
pangomm: include typesafe callbacks, widgets extensible via inheritance and a
pangomm: comprehensive set of widget classes that can be freely combined to
pangomm: quickly create complex user interfaces.
pangomm:
pangomm: http://gtkmm.sourceforge.net/
pangomm:
pangomm:
pangomm: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  parted-2.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  507 K
PACKAGE SIZE (uncompressed):  2270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
parted: parted (GNU disk partitioning tool)
parted:
parted: GNU Parted is a program for creating, destroying, resizing, checking
parted: and copying partitions, and the filesystems on them.  This is useful
parted: for creating space for new operating systems, reorganizing disk
parted: usage, copying data between hard disks, and disk imaging.
parted:
parted:
parted:
parted:
parted:

PACKAGE NAME:  pcre-8.02-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  392 K
PACKAGE SIZE (uncompressed):  1380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pcre: pcre (Perl-compatible regular expression library)
pcre:
pcre: The PCRE library is a set of functions that implement regular
pcre: expression pattern matching using the same syntax and semantics as
pcre: Perl 5, with just a few differences (documented in the man page).
pcre:
pcre: The PCRE library is used by KDE's Konqueror browser.
pcre:
pcre:
pcre:
pcre:

PACKAGE NAME:  perl-file-desktopentry-0.04-noarch-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  perl >= 5.10.0,perl-file-basedir >= 0.03
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
perl-file-desktopentry: perl-file-desktopentry (Object to handle .desktop files)
perl-file-desktopentry:
perl-file-desktopentry: This module is used to work with .desktop files. The format of these
perl-file-desktopentry: files is specified by the freedesktop "Desktop Entry" specification.
perl-file-desktopentry: See http://freedesktop.org/wiki/Standards_2fdesktop_2dentry_2dspec.
perl-file-desktopentry: For this module version 0.9.4 of the specification was used.
perl-file-desktopentry:
perl-file-desktopentry: http://search.cpan.org/dist/File-DesktopEntry/
perl-file-desktopentry:
perl-file-desktopentry:
perl-file-desktopentry: Packager: vl70@vector.Linux.net on 30-Jan-2011

PACKAGE NAME:  pil-1.1.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  358 K
PACKAGE SIZE (uncompressed):  1590 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pil: pil (Python Imaging Library)
pil:
pil: The Python Imaging Library (PIL) adds image processing capabilities
pil: to your Python environment.  This library provides extensive file
pil: format support, an efficient internal representation, and powerful
pil: image processing capabilities.
pil:
pil: PIL is used by the scanning component of HPLIP.
pil:
pil: PIL homepage:  http://www.pythonware.com/products/pil/
pil:

PACKAGE NAME:  pilot-link-0.12.5-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  547 K
PACKAGE SIZE (uncompressed):  2210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pilot-link: pilot-link (library for communicating with PalmOS devices)
pilot-link:
pilot-link: This is a library for communicating with Palm Computing, Inc.  Palm
pilot-link: Devices as well as the Handspring Visor,  TRGPro,  and other devices
pilot-link: which conform to this standard (PalmOS licensed devices).
pilot-link:
pilot-link: pilot-link is used by KPilot.
pilot-link:
pilot-link:
pilot-link:
pilot-link:

PACKAGE NAME:  podofo-0.8.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  650 K
PACKAGE SIZE (uncompressed):  3040 K
PACKAGE REQUIRED:  fontconfig >= 2.7.1,freetype >= 2.3.9,libjpeg >= 8,libtiff >= 3.9.2,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
podofo|-----handy-ruler------------------------------------------------------|
podofo: podofo (Tools and libraries to work with the PDF file format)
podofo:
podofo: PoDoFo is a library to work with the PDF file format. The name comes
podofo: from the first letter of PDF (Portable Document Format). A few tools
podofo: to work with PDF files are already included in the PoDoFo package.
podofo:
podofo: http://podofo.sourceforge.net
podofo:
podofo:
podofo: Packager: vl70@vector.linux.net on 14-Feb-2011
podofo:

PACKAGE NAME:  polkit-0.101-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  355 K
PACKAGE SIZE (uncompressed):  1740 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
polkit: polkit (authentication framework)
polkit: 
polkit: PolicyKit is an application-level toolkit for defining and handling
polkit: the policy that allows unprivileged processes to speak to privileged
polkit: processes.  PolicyKit is specifically targeting applications in rich
polkit: desktop environments on multi-user UNIX-like operating systems.
polkit:
polkit:
polkit:
polkit: Home: http://www.freedesktop.org/wiki/Software/PolicyKit
polkit:

PACKAGE NAME:  polkit-gnome-0.101-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  670 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
polkit-gnome: polkit-gnome (GTK+ authentication agent for polkit)
polkit-gnome:
polkit-gnome: polkit-gnome provides a GTK+ based authentication agent for polkit.
polkit-gnome: It can be used by any desktop environment that follows the XDG
polkit-gnome: Base Directory Specification.
polkit-gnome:
polkit-gnome:
polkit-gnome:
polkit-gnome:
polkit-gnome:
polkit-gnome:

PACKAGE NAME:  poppler-0.16.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1009 K
PACKAGE SIZE (uncompressed):  5260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
poppler: poppler (a library for rendering PDF documents)
poppler:
poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek
poppler: Noonburg of Glyph and Cog, LLC.  Since xpdf does not provide a shared
poppler: library, whenever a flaw was found potentially dozens of applications
poppler: incorporating code from xpdf would have to be patched.  By providing
poppler: a centralized PDF library this duplicated effort will be eliminated.
poppler:
poppler:
poppler:
poppler:

PACKAGE NAME:  poppler-data-0.4.4-noarch-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1447 K
PACKAGE SIZE (uncompressed):  11920 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
poppler-data: poppler-data (data files used by poppler)
poppler-data:
poppler-data: This package consists of encoding files for use with poppler.  The
poppler-data: encoding files are optional and poppler will automatically read them
poppler-data: if they are present.  When installed, the encoding files enables
poppler-data: poppler to correctly render CJK and Cyrillic properly.  While poppler
poppler-data: is licensed under the GPL, these encoding files are copyright Adobe
poppler-data: and licensed much more strictly, and thus distributed separately.
poppler-data:
poppler-data:
poppler-data:

PACKAGE NAME:  popt-1.7-x86_64-3.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  40 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
popt: popt (command line parsing library)
popt:
popt: Popt is a C library for parsing command line parameters.  Popt was
popt: heavily influenced by the getopt() and getopt_long() functions, but it
popt: improves on them by allowing more powerful argument expansion.  Popt
popt: can parse arbitrary argv[] style arrays and automatically set
popt: variables based on command line arguments.  Popt allows command line
popt: arguments to be aliased via configuration files and includes utility
popt: functions for parsing arbitrary strings into argv[] arrays using
popt: shell-like rules.
popt:

PACKAGE NAME:  pycairo-1.8.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pycairo: pycairo (a set of Python bindings for the cairo graphics library)
pycairo:
pycairo: Pycairo is set of Python bindings for the cairo graphics library.
pycairo: 
pycairo: Pycairo's web site:  http://cairographics.org/pycairo
pycairo:
pycairo:
pycairo:
pycairo:
pycairo:
pycairo:

PACKAGE NAME:  pycups-1.9.55-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  61 K
PACKAGE SIZE (uncompressed):  240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pycups: pycups (Python bindings for the CUPS API)
pycups:
pycups: These Python bindings are intended to wrap the CUPS API.
pycups:
pycups: Homepage:  http://cyberelk.net/tim/software/pycups/
pycups:
pycups:
pycups:
pycups:
pycups:
pycups:

PACKAGE NAME:  pygobject-2.26.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  392 K
PACKAGE SIZE (uncompressed):  3470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pygobject: pygobject (GObject bindings for Python)
pygobject:
pygobject: This archive contains bindings for the GObject, to be used in Python.
pygobject: It is a fairly complete set of bindings, it's already rather useful,
pygobject: and is usable to write moderately complex programs.
pygobject:
pygobject: pygobject's home page:  http://www.pygtk.org/
pygobject:
pygobject:
pygobject:
pygobject:

PACKAGE NAME:  pygtk-2.22.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1660 K
PACKAGE SIZE (uncompressed):  16470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pygtk: pygtk (GTK+ bindings for Python)
pygtk:
pygtk: PyGTK provides a convenient wrapper for the GTK+ library for use in
pygtk: Python programs, taking care of many of the boring details such as
pygtk: managing memory and type casting.
pygtk:
pygtk: PyGTK's web page:  http://www.pygtk.org/
pygtk:
pygtk:
pygtk:
pygtk:

PACKAGE NAME:  pyqt4-4.8.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  2438 K
PACKAGE SIZE (uncompressed):  16800 K
PACKAGE REQUIRED:  dbus-python,phonon >= 4.3.80,python >= 2.6,qt4 >= 4.6.0 | qt >= 4.6.0,sip >= 4.10
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pyqt4: pyqt4 (Python bindings for Qt4)
pyqt4:
pyqt4: These are Python bindings for Qt4.
pyqt4:
pyqt4: http://www.riverbankcomputing.co.uk/software/pyqt
pyqt4:
pyqt4:
pyqt4: Packager: vl70@vector.linux.net on 26-Mar-2011
pyqt4:
pyqt4:
pyqt4:

PACKAGE NAME:  pysmbc-1.0.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  34 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  python >= 2.6,samba >= 3.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pysmbc|-----handy-ruler------------------------------------------------------|
pysmbc: pysmbc (Python bindings for the libsmbclient API)
pysmbc:
pysmbc: These Python bindings are intended to wrap the libsmbclient API.
pysmbc:
pysmbc: http://cyberelk.net/tim/software/pysmbc/
pysmbc:
pysmbc:
pysmbc: Packager: vl70@vector.linux.net on 14-Feb-2011
pysmbc:
pysmbc:
pysmbc:

PACKAGE NAME:  python-cddb-1.4-x86_64-4vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python-cddb|-----handy-ruler------------------------------------------------------|
python-cddb: python-cddb (CDDB and FreeDB audio CD track info access in Python)
python-cddb:
python-cddb: This is actually a set of three modules to access the CDDB and FreeDB
python-cddb: online databases of audio CD track titles and information. It includes
python-cddb: a C extension module to fetch track lengths under Linux, FreeBSD,
python-cddb: OpenBSD, Mac OS X, Solaris, and Win32, which is easily ported to other
python-cddb: operating systems.
python-cddb:
python-cddb: http://cddb-py.sourceforge.net/
python-cddb:
python-cddb: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  python-mutagen-1.19-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  142 K
PACKAGE SIZE (uncompressed):  1140 K
PACKAGE REQUIRED:  python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python-mutagen|-----handy-ruler------------------------------------------------------|
python-mutagen: python-mutagen (A Python module to handle audio metadata)
python-mutagen:
python-mutagen: Mutagen is a Python module to handle audio metadata. It supports
python-mutagen: reading ID3 (all versions), APEv2, FLAC, and Ogg Vorbis/FLAC/Theora.
python-mutagen: It can write ID3v1.1, ID3v2.4, APEv2, FLAC, and Ogg Vorbis/FLAC/Theora
python-mutagen: comments. It can also read MPEG audio and Xing headers, FLAC stream
python-mutagen: info blocks, and Ogg Vorbis/FLAC/Theora stream headers. Finally, it
python-mutagen: includes a module to handle generic Ogg bitstreams.
python-mutagen:
python-mutagen: http://code.google.com/p/mutagen/
python-mutagen: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  python-sexy-0.1.9-x86_64-5vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  libsexy >= 0.1.11,libxml2 >= 2.7.2,python >= 2.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python-sexy: python-sexy (Python bindings to libsexy)
python-sexy:
python-sexy: sexy-python is a set of Python bindings around libsexy.
python-sexy:
python-sexy: http://www.chipx86.com/wiki/Libsexy
python-sexy:
python-sexy:
python-sexy: Packager: vl70@vector.linux.net on 14-Feb-2011
python-sexy:
python-sexy:
python-sexy:

PACKAGE NAME:  python-sqlite-2.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  62 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  python >= 2.6,sqlite >= 3.6.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
python-sqlite|-----handy-ruler------------------------------------------------------|
python-sqlite: python-sqlite (DB-API 2.0 interface for SQLite 3.x)
python-sqlite:
python-sqlite: pysqlite is an interface to the SQLite 3.x embedded relational
python-sqlite: database engine. It is almost fully compliant with the Python
python-sqlite: database API version 2.0 also exposes the unique features of SQLite.
python-sqlite:
python-sqlite: http://trac.edgewall.org/wiki/PySqlite
python-sqlite:
python-sqlite:
python-sqlite: Packager: vl70@vector.linux.net on 14-Feb-2011
python-sqlite:

PACKAGE NAME:  qt-4.7.0_7abde40-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  23800 K
PACKAGE SIZE (uncompressed):  104100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qt: Qt (a multi-platform C++ graphical user interface toolkit)
qt:
qt: Qt is a complete and well-developed object-oriented framework for
qt: developing graphical user interface (GUI) applications using C++.
qt:
qt:
qt:
qt:
qt:
qt: Homepage:  http://qt.nokia.com
qt:

PACKAGE NAME:  qt3-3.3.8b-x86_64-opt2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  6122 K
PACKAGE SIZE (uncompressed):  31140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qt3: Qt3 (a multi-platform C++ graphical user interface toolkit, version 3)
qt3:
qt3: Qt is a complete and well-developed object-oriented framework for
qt3: developing graphical user interface (GUI) applications using C++.
qt3:
qt3: This release is free only for development of free software for the X
qt3: Window System.  If you use Qt for developing commercial or other
qt3: non-free software, you must have a professional license.  Please see
qt3: http://www.trolltech.com/purchase.html for information on how to
qt3: obtain a professional license.
qt3:

PACKAGE NAME:  readline-5.2-x86_64-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  273 K
PACKAGE SIZE (uncompressed):  1080 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
readline: readline (line input library with editing features)
readline:
readline: The GNU Readline library provides a set of functions for use by
readline: applications that allow users to edit command lines as they are typed
readline: in.  Both Emacs and vi editing modes are available.  The Readline
readline: library includes additional functions to maintain a list of previously
readline: entered command lines, to recall and perhaps edit those lines, and
readline: perform csh-like history expansion on previous commands.  
readline:
readline:
readline:

PACKAGE NAME:  rtmpdump-2.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  300 K
PACKAGE REQUIRED:  openssl >= 1.0.0 | openssl-solibs >= 1.0.0,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rtmpdump|-----handy-ruler------------------------------------------------------|
rtmpdump: rtmpdump (A toolkit for RTMP streams)
rtmpdump:
rtmpdump: rtmpdump is a toolkit for RTMP streams. All forms of RTMP are
rtmpdump: supported, including rtmp://, rtmpt://, rtmpe://, rtmpte://,
rtmpdump: and rtmps://.
rtmpdump:
rtmpdump: http://rtmpdump.mplayerhq.hu/
rtmpdump:
rtmpdump:
rtmpdump: Packager: vl70@vector.linux.net on 14-Feb-2011
rtmpdump:

PACKAGE NAME:  schroedinger-1.0.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  318 K
PACKAGE SIZE (uncompressed):  1850 K
PACKAGE REQUIRED:  gstreamer >= 0.10.22,gst-plugins-base >= 0.10.22,liboil >= 0.3.16,orc >= 0.4.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
schroedinger|-----handy-ruler------------------------------------------------------|
schroedinger: schroedinger (Libraries for the high quality Dirac video codec)
schroedinger:
schroedinger: The Schrödinger project implement portable libraries for the high
schroedinger: quality Dirac video codec created by BBC Research and Development.
schroedinger: Dirac is a free and open source codec producing very high image
schroedinger: quality video.
schroedinger:
schroedinger: http://www.diracvideo.org/
schroedinger:
schroedinger:
schroedinger: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  shared-mime-info-0.90-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  380 K
PACKAGE SIZE (uncompressed):  3300 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
shared-mime-info: shared-mime-info (MIME database)
shared-mime-info:
shared-mime-info: This package contains:
shared-mime-info:
shared-mime-info:   The freedesktop.org shared MIME database spec.
shared-mime-info:   The merged GNOME and KDE databases, in the new format.
shared-mime-info:   The update-mime-database command, used to install new MIME data.
shared-mime-info:
shared-mime-info: See http://www.freedesktop.org/standards/shared-mime-info.html for
shared-mime-info: more information.
shared-mime-info:

PACKAGE NAME:  slang-2.2.3-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  420 K
PACKAGE SIZE (uncompressed):  1870 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slang: slang (S-Lang interpreter version 2)
slang:
slang: S-Lang is an interpreted language that was designed from the start
slang: to be easily embedded into a program to provide it with a powerful
slang: extension language.  S-Lang is also a programmer's library that
slang: permits a programmer to develop sophisticated platform-independent
slang: software.  In addition to providing the S-Lang extension language,
slang: the library provides facilities for screen management, keymaps,
slang: and low-level terminal I/O.
slang:
slang:

PACKAGE NAME:  speex-1.2rc1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  516 K
PACKAGE SIZE (uncompressed):  780 K
PACKAGE REQUIRED:  libogg >= 1.1.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
speex: speex (A voice compression format)
speex:
speex: Speex is a patent-free compression format designed especially for
speex: speech. It is specialized for voice communications at low bit-rates in
speex: the 2-45 kbps range. Possible applications include Voice over IP
speex: (VoIP), Internet audio streaming, audio books, and archiving of speech
speex: data (e.g. voice mail).
speex:
speex: http://www.speex.org/
speex:
speex: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  startup-notification-0.10-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
startup-notification: startup-notification ("busy" cursors support)
startup-notification:
startup-notification: Adds support for applications to use "busy" cursors while starting up.
startup-notification:
startup-notification:
startup-notification:
startup-notification:
startup-notification:
startup-notification:
startup-notification:
startup-notification:

PACKAGE NAME:  svgalib-1.9.25-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  582 K
PACKAGE SIZE (uncompressed):  1580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
svgalib: svgalib (A low level graphics library for Linux)
svgalib: 
svgalib: This is a low level graphics library for Linux, originally based on
svgalib: VGAlib 1.2 by Tommy Frandsen.  Support for many more chipsets has
svgalib: been added.
svgalib:
svgalib: svgalib is currently maintained by Matan Ziv-Av.
svgalib:
svgalib:
svgalib:
svgalib:

PACKAGE NAME:  swig-1.3.38-x86_64-2.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  1958 K
PACKAGE SIZE (uncompressed):  14540 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
swig: swig (Simplified Wrapper and Interface Generator)
swig:
swig: SWIG is an interface compiler that connects programs written in C and
swig: C++ with scripting languages such as Perl, Python, Ruby, and Tcl.  It
swig: works by taking the declarations found in C/C++ header files and using
swig: them to generate the wrapper code that scripting languages need to
swig: access the underlying C/C++ code.  In addition, SWIG provides a variety
swig: of customization features that let you tailor the wrapping process to
swig: suit your application.
swig: 
swig: 

PACKAGE NAME:  system-config-printer-1.2.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  621 K
PACKAGE SIZE (uncompressed):  4630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
system-config-printer: system-config-printer (CUPS printer administration tool)
system-config-printer:
system-config-printer: The purpose of the tool is to configure a CUPS server (often the local
system-config-printer: machine) using the CUPS API.  The tool is written in Python, using
system-config-printer: pygtk for the graphical parts and Python bindings (pycups) for the
system-config-printer: CUPS API.  It is largely the same as using the CUPS web interface for
system-config-printer: configuring printers, but has the advantage of being a native
system-config-printer: application rather than a web page.
system-config-printer:
system-config-printer: Home: http://cyberelk.net/tim/software/system-config-printer/
system-config-printer:

PACKAGE NAME:  t1lib-5.1.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  910 K
PACKAGE SIZE (uncompressed):  1580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
t1lib: t1lib (Type 1 font rasterizer library)
t1lib:
t1lib: t1lib is a library distributed under the GNU General Public Library
t1lib: License for generating character and string glyphs from Adobe Type 1
t1lib: fonts under UNIX.  t1lib uses most of the code of the X11 rasterizer
t1lib: donated by IBM to the X11 project.
t1lib:
t1lib:
t1lib:
t1lib:
t1lib:

PACKAGE NAME:  totem-pl-parser-2.32.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  176 K
PACKAGE SIZE (uncompressed):  1180 K
PACKAGE REQUIRED:  evolution-data-server >= 2.26.0,gmime >= 2.4.20,gtk+2 >= 2.16.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
totem-pl-parser: totem-pl-parser (Totem Playlist Parser library)
totem-pl-parser:
totem-pl-parser: A library to parse and save playlists, as used in music and movie
totem-pl-parser: players.
totem-pl-parser:
totem-pl-parser: http://www.gnome.org/projects/totem/
totem-pl-parser:
totem-pl-parser:
totem-pl-parser: Packager: vl70@vector.linux.net on 26-Mar-2011
totem-pl-parser:
totem-pl-parser:

PACKAGE NAME:  twolame-0.3.12-x86_64-3vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  98 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  flac >= 1.1.2,libsndfile >= 1.0.17
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
twolame: twolame (A optimized MPEG Audio Layer 2 (MP2) encoder)
twolame:
twolame: TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on
twolame: tooLAME by Mike Cheng, which in turn is based upon the ISO dist10
twolame: code and portions of LAME.
twolame: Because of patent issues surrounding the MPEG Audio Layer 3 (MP3)
twolame: encoders, the ability of most MPEG Audio players to play layer 2
twolame: files, and the similarity in command-line syntax and API, TwoLAME
twolame: makes a very good drop-in replacement for LAME or other layer 3
twolame: encoders.
twolame: http://www.twolame.org/         Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  vte-0.26.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  370 K
PACKAGE SIZE (uncompressed):  2220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vte: vte (terminal emulator widget)
vte:
vte: VTE is a terminal emulator widget for use with GTK+.  This package
vte: contains the VTE library and development files and a sample
vte: implementation (vte).
vte:
vte: VTE is used by XFce.
vte:
vte:
vte:
vte:

PACKAGE NAME:  wavpack-4.60.1-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  118 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wavpack: wavpack (A lossless WAV file compressor)
wavpack:
wavpack: Wavpack is a hybrid lossless wavefile compressor.  Wavfile is
wavpack: Copyright (c) 1998 - 2006 Conifer Software.  All Rights Reserved.
wavpack:
wavpack: Wavpack is distributed under the BSD Software License.
wavpack:
wavpack: Visit the wavpack project online:  http://www.wavpack.com
wavpack:
wavpack:
wavpack:

PACKAGE NAME:  webkitgtk-1.3.11-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  4948 K
PACKAGE SIZE (uncompressed):  29100 K
PACKAGE REQUIRED:  freetype >= 2.3.9,geoclue >= 0.11.1,gstreamer >= 0.10.24,gtk+2 >= 2.18.0,icu >= 4.2,libpng >= 1.4.0,libsoup >= 2.28.0,sqlite >= 3.6.14
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
webkitgtk: webkitgtk (GTK+ Web content engine library)
webkitgtk:
webkitgtk: WebKit is an open-source Web content engine library. This package
webkitgtk: contains the shared libraries for the WebKit GTK+ port as well as
webkitgtk: the sample GtkLauncher tool. 
webkitgtk:
webkitgtk: http://webkit.org/
webkitgtk:
webkitgtk:
webkitgtk: Packager: vl70@vector.linux.net on 26-Mar-2011
webkitgtk:

PACKAGE NAME:  wv-1.2.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  201 K
PACKAGE SIZE (uncompressed):  1220 K
PACKAGE REQUIRED:  glib2 >= 2.18.2,libgsf >= 1.14.10,libwmf >= 0.2.8.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wv|-----handy-ruler------------------------------------------------------|
wv: wv (MSWord 6/7/8/9 binary file format to HTML converter)
wv:
wv: Wv is a program that understands the Microsoft Word 6/7/8/9 binary
wv: file format and is able to convert Word documents into HTML, which
wv: can then be read with a browser.
wv:
wv:  http://wvware.sourceforge.net
wv:
wv:
wv: Packager: vl70@vector.linux.net on 14-Feb-2011
wv:

PACKAGE NAME:  wv2-0.4.2-x86_64-1.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  256 K
PACKAGE SIZE (uncompressed):  1290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wv2: wv2 (MS Word document import library)
wv2:
wv2: wv2 is a portable MS Word .doc import filter that is used by KWord.
wv2: Currently, it supports MS Word 6, MS Word 95, MS Word 97, MS Word
wv2: 2000, and MS Word 2002 (XP) documents.  Older versions like Word 2, 3,
wv2: 4, and 5 aren't supported yet, but might be in the future.
wv2:
wv2: wv2's authors are Shaheed Haque, Werner Trobin, and David Faure.
wv2:
wv2:
wv2:

PACKAGE NAME:  x264-20110214-x86_64-1vl70.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  960 K
PACKAGE SIZE (uncompressed):  6600 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
x264: x264 (Library for encoding and decoding H264/AVC video streams)
x264:
x264: x264 is a free library for encoding H264/AVC video streams, written
x264: from scratch.
x264:
x264: http://www.videolan.org/developers/x264.html
x264:
x264:
x264: Packager: vl70@vector.linux.net on 14-Feb-2011
x264:
x264:

PACKAGE NAME:  zlib-1.2.5-x86_64-4.txz
PACKAGE LOCATION:  ./l
PACKAGE SIZE (compressed):  94 K
PACKAGE SIZE (uncompressed):  400 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
zlib: zlib (compression library)
zlib:
zlib: zlib is a general purpose thread safe data compression library.  The
zlib: data format used by the zlib library is described by RFCs 1950 to 
zlib: 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
zlib: rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
zlib:
zlib:
zlib:
zlib:
zlib:

PACKAGE NAME:  autofs-5.0.5-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  297 K
PACKAGE SIZE (uncompressed):  1640 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
autofs: autofs (kernel-based automounter)
autofs:
autofs: autofs is a kernel-based automounter for Linux.  It performs a job
autofs: similar to amd(8) but relies on a small stub of kernel code instead of
autofs: pretending to be an NFS server.  The result is simpler code, better
autofs: reliability, and much faster operation in the common case (everything
autofs: already mounted.)
autofs:
autofs:
autofs:
autofs:

PACKAGE NAME:  bind-9.7.3-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  1829 K
PACKAGE SIZE (uncompressed):  6910 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bind: bind (DNS server and utilities)
bind:
bind: The named daemon and support utilities such as dig, host, and
bind: nslookup.  Sample configuration files for running a simple caching
bind: nameserver are included.  Documentation for advanced name server
bind: setup can be found in /usr/doc/bind-9.x.x/.
bind:
bind:
bind:
bind:
bind:

PACKAGE NAME:  bluez-4.89-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  500 K
PACKAGE SIZE (uncompressed):  1900 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bluez: bluez (Bluetooth libraries and utilities)
bluez:
bluez: Bluez is the Bluetooth stack for Linux, allowing Bluetooth adaptors
bluez: and devices to be used with Linux.  This package contains the Bluez
bluez: libraries, utilities, and other support files.
bluez: 
bluez: For more info, visit:  http://www.bluez.org
bluez:
bluez:
bluez:
bluez:

PACKAGE NAME:  bluez-firmware-1.2-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  70 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bluez-firmware: bluez-firmware (Bluetooth(TM) firmware)
bluez-firmware:
bluez-firmware: The bluez-firmware package contains firmware needed by various
bluez-firmware: chipsets to support Bluetooth(TM) on Linux.
bluez-firmware:
bluez-firmware: For more info, visit:  http://www.bluez.org
bluez-firmware:
bluez-firmware:
bluez-firmware:
bluez-firmware:
bluez-firmware:

PACKAGE NAME:  bluez-hcidump-2.0-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  90 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bluez-hcidump: bluez-hcidump (Bluetooth analyzer)
bluez-hcidump:
bluez-hcidump: The bluez-hcidump package contains a network analyzer for Bluetooth.
bluez-hcidump: This utility (hcidump) utility reads raw HCI data coming from and
bluez-hcidump: going to a Bluetooth device and prints commands, events and data.
bluez-hcidump:
bluez-hcidump: For more info, visit:  http://www.bluez.org
bluez-hcidump:
bluez-hcidump:
bluez-hcidump:
bluez-hcidump:

PACKAGE NAME:  curl-7.20.1-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  649 K
PACKAGE SIZE (uncompressed):  2240 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
curl: curl (command line URL data transfer tool)
curl:
curl: Curl is a command line tool for transferring data specified with URL
curl: syntax.  The command is designed to work without user interaction or
curl: any kind of interactivity.   Curl offers a busload of useful tricks
curl: like proxy support, user authentication, ftp upload, HTTP post,  SSL
curl: (https:) connections, cookies, file transfer resume and more.
curl:
curl: libcurl is a library that Curl uses to do its job. It is readily
curl: available to be used by your software, too.
curl:

PACKAGE NAME:  cyrus-sasl-2.1.23-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  403 K
PACKAGE SIZE (uncompressed):  1700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cyrus-sasl: cyrus-sasl (Simple Authentication and Security Layer)
cyrus-sasl:
cyrus-sasl: This is the Cyrus SASL library.  Cyrus SASL is used by mail programs 
cyrus-sasl: on the client or server side to provide authentication and
cyrus-sasl: authorization services.  See RFC 2222 for more information.
cyrus-sasl:
cyrus-sasl:
cyrus-sasl:
cyrus-sasl:
cyrus-sasl:
cyrus-sasl:

PACKAGE NAME:  dhcpcd-5.2.11-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  61 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dhcpcd: dhcpcd (DHCP client daemon)
dhcpcd:
dhcpcd: The DHCP client program dhcpcd is used to connect to a network by
dhcpcd: contacting a DHCP server.  dhcpcd gets an IP address and other
dhcpcd: information from a corresponding DHCP server, configures the network
dhcpcd: interface automatically, and tries to renew the lease time according
dhcpcd: to RFC2131 or RFC1541 depending on the command line option.
dhcpcd:
dhcpcd:
dhcpcd:
dhcpcd:

PACKAGE NAME:  firefox-3.6.16-x86_64-1vl70.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  914 K
PACKAGE SIZE (uncompressed):  3720 K
PACKAGE REQUIRED:  atk >= 1.26.0,cairo >= 1.8.6,glib2 >= 2.20.1,gtk+2 >= 2.16.2,hunspell >= 1.2.8,lcms >= 1.18,libidl >= 0.8.10,nspr >= 4.7.3,nss >= 3.12.2.0,pango >= 1.24.1,sqlite >= 3.6.22,xulrunner >= 1.9.2,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
firefox: firefox (Mozilla Firefox Web browser)
firefox:
firefox: This project is a redesign of the Mozilla browser component written
firefox: using the XUL user interface language. Firefox empowers you to
firefox: browse faster, more safely and more efficiently than with any other
firefox: browser.
firefox:
firefox: Visit the Mozilla Firefox project online:
firefox:   http://www.mozilla.org/projects/firefox/
firefox:
firefox: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  gnupg2-2.0.17-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  1560 K
PACKAGE SIZE (uncompressed):  7690 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnupg2: GnuPG2 (The GNU Privacy Guard version 2.x)
gnupg2:
gnupg2: GnuPG is GNU's tool for secure communication and data storage.  It can
gnupg2: be used to encrypt data and to create digital signatures.  It includes
gnupg2: an advanced key management facility and is compliant with the proposed
gnupg2: OpenPGP Internet standard as described in RFC2440 and the S/MIME
gnupg2: standard as described by several RFCs.
gnupg2:
gnupg2: GnuPG 2.0 is the stable version of GnuPG integrating support for
gnupg2: OpenPGP and S/MIME.  It does not conflict with an installed 1.4.x
gnupg2: OpenPGP-only version.

PACKAGE NAME:  gnutls-2.10.5-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  1539 K
PACKAGE SIZE (uncompressed):  3750 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnutls: gnutls (GNU TLS library)
gnutls:
gnutls: This is a TLS (Transport Layer Security) 1.0 and SSL (Secure Sockets
gnutls: Layer) 3.0 implementation.  In brief, GnuTLS can be described as a
gnutls: library which offers an API to access secure communication protocols.
gnutls: These protocols provide privacy over insecure lines, and were designed
gnutls: to prevent eavesdropping, tampering, or message forgery.
gnutls:
gnutls: Homepage: http://www.gnu.org/software/gnutls/
gnutls:
gnutls:

PACKAGE NAME:  gpgme-1.3.0-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  239 K
PACKAGE SIZE (uncompressed):  1000 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gpgme: gpgme (GnuPG Made Easy)
gpgme:
gpgme: GPGME (GnuPG Made Easy) is a C language library that allows to add
gpgme: support for cryptography to a program.  It is designed to make access
gpgme: to public key crypto engines like GnuPG or GpgSM easier for
gpgme: applications.  GPGME provides a high-level crypto API for encryption,
gpgme: decryption, signing, signature verification and key management.
gpgme:
gpgme: GPGME uses GnuPG and GpgSM as its backends to support OpenPGP and the 
gpgme: Cryptographic Message Syntax (CMS).
gpgme:

PACKAGE NAME:  inetd-1.79s-x86_64-8.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
inetd: inetd (Internet super-server)
inetd:
inetd: This is a program to listen for connections on certain Internet
inetd: sockets and invokes a program to service the request.  Essentially,
inetd: inetd allows running one daemon to invoke several others, reducing
inetd: load on the system.  Many of the network services are run through
inetd: inetd, so you'll probably need it.
inetd:
inetd: This version of inetd was ported from OpenBSD.
inetd:
inetd:

PACKAGE NAME:  iptables-1.4.10-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  287 K
PACKAGE SIZE (uncompressed):  1460 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
iptables: iptables (IP packet filter administration)
iptables:
iptables: iptables is a packet filter administration tool. 
iptables:
iptables: Iptables can be used to build internet firewalls based on stateless
iptables: and stateful packet filtering, use NAT and masquerading for sharing
iptables: internet access if you don't have enough public IP addresses, use NAT
iptables: to implement transparent proxies, aid the tc and iproute2 systems
iptables: used to build sophisticated QoS and policy routers, do further packet
iptables: manipulation (mangling) like altering the TOS/DSCP/ECN bits of the IP
iptables: header, and much more.  See:  http://www.netfilter.org

PACKAGE NAME:  libassuan-2.0.1-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  100 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libassuan: libassuan (Interprocess Communication Library for GPG)
libassuan:
libassuan: This is the IPC library used by GnuPG 2.x, GPGME and a few other
libassuan: packages. 
libassuan:
libassuan:
libassuan:
libassuan:
libassuan:
libassuan:
libassuan:

PACKAGE NAME:  libgcrypt-1.4.6-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  390 K
PACKAGE SIZE (uncompressed):  1690 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgcrypt: libgcrypt (General purpose crypto library)
libgcrypt:
libgcrypt: Libgcrypt is a general purpose crypto library based on the code 
libgcrypt: used in GnuPG. 
libgcrypt:
libgcrypt:
libgcrypt:
libgcrypt:
libgcrypt:
libgcrypt:
libgcrypt:

PACKAGE NAME:  libgpg-error-1.9-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  81 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libgpg-error: libgpg-error (GnuPG Error Definitions Library)
libgpg-error:
libgpg-error: This is a library that defines common error values for all GnuPG
libgpg-error: components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, 
libgpg-error: libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon, and more.
libgpg-error:
libgpg-error:
libgpg-error:
libgpg-error:
libgpg-error:
libgpg-error:

PACKAGE NAME:  libksba-1.2.0-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  130 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libksba: libksba (X.509 & CMS library for S/MIME and TLS)
libksba:
libksba: KSBA (pronounced Kasbah) is a library to make X.509 certificates as
libksba: well as the CMS easily accessible by other applications.
libksba: Both specifications are building blocks of S/MIME and TLS.
libksba:
libksba:
libksba:
libksba:
libksba:
libksba:

PACKAGE NAME:  ndiswrapper-r2728_2.6.37.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  114 K
PACKAGE SIZE (uncompressed):  530 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13,perl >= 5.12.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ndiswrapper: ndiswrapper ()
ndiswrapper:
ndiswrapper: 
ndiswrapper: 
ndiswrapper: 
ndiswrapper:
ndiswrapper:
ndiswrapper: License: GPL
ndiswrapper: Authors: 
ndiswrapper: Website: 

PACKAGE NAME:  net-tools-1.60-x86_64-3.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  116 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
net-tools: net-tools (base Linux networking utilities)
net-tools:
net-tools: This is the core collection of tools such as "ifconfig" and "route"
net-tools: used to configure networking on Linux.  You won't be able to do much
net-tools: networking without this package and the network-scripts.
net-tools:
net-tools: The net-tools package was maintained for many years by Phil Blundell
net-tools: and Bernd Eckenfels.
net-tools:
net-tools:
net-tools:

PACKAGE NAME:  network-scripts-13.0-noarch-3.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
network-scripts: network-scripts (Scripts to configure a network)
network-scripts:
network-scripts: These are the basic scripts and files used to define a network and
network-scripts: configure network interfaces on Linux.  Most of the original
network-scripts: /etc files were written by Fred N. van Kempen, or borrowed from BSD.
network-scripts: The rc.inet1 and rc.inet2 scripts were mostly written by Patrick
network-scripts: Volkerding, with suggestions and fixes from hundreds of contributors
network-scripts: over the years.
network-scripts:
network-scripts:
network-scripts:

PACKAGE NAME:  nfs-utils-1.2.3-x86_64-2.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  203 K
PACKAGE SIZE (uncompressed):  710 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
nfs-utils: nfs-utils (Network File System daemons and utilities)
nfs-utils:
nfs-utils: The nfs-utils package contains the necessary daemons and utilities to
nfs-utils: run an NFS server on Linux.
nfs-utils:
nfs-utils: You'll also need the portmap package to use NFS.
nfs-utils:
nfs-utils:
nfs-utils:
nfs-utils:
nfs-utils:

PACKAGE NAME:  openldap-client-2.4.23-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  381 K
PACKAGE SIZE (uncompressed):  1580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openldap-client: openldap-client (OpenLDAP client programs)
openldap-client:
openldap-client: OpenLDAP is an open source implementation of the Lightweight
openldap-client: Directory Access Protocol.  LDAP is a alternative to the X.500
openldap-client: Directory Access Protocol (DAP). It uses the TCP/IP stack versus
openldap-client: the overly complex OSI stack.
openldap-client:
openldap-client: LDAP is often used to provide authentication (such as for email).
openldap-client:
openldap-client: The OpenLDAP homepage is http://www.openldap.org/
openldap-client:

PACKAGE NAME:  openssh-5.8p1-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  574 K
PACKAGE SIZE (uncompressed):  2560 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openssh: openssh (Secure Shell daemon and clients)
openssh:
openssh: ssh (Secure Shell) is a program for logging into a remote machine and
openssh: for executing commands on a remote machine.  It is intended to replace
openssh: rlogin and rsh, and provide secure encrypted communications between
openssh: two untrusted hosts over an insecure network.  sshd (SSH Daemon) is
openssh: the daemon program for ssh.  OpenSSH is based on the last free version
openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron
openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and
openssh: Dug Song.  It has a homepage at http://www.openssh.com/
openssh:

PACKAGE NAME:  openssl-0.9.8r-x86_64-2.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  2361 K
PACKAGE SIZE (uncompressed):  10550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openssl: openssl (Secure Sockets Layer toolkit)
openssl:
openssl: The OpenSSL certificate management tool and the shared libraries that
openssl: provide various encryption and decryption algorithms and protocols.
openssl:
openssl: This product includes software developed by the OpenSSL Project for
openssl: use in the OpenSSL Toolkit (http://www.openssl.org).  This product
openssl: includes cryptographic software written by Eric Young
openssl: (eay@cryptsoft.com).  This product includes software written by Tim
openssl: Hudson (tjh@cryptsoft.com).
openssl:

PACKAGE NAME:  opera-11.01.1190-x86_64-1vl70.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  10387 K
PACKAGE SIZE (uncompressed):  33330 K
PACKAGE REQUIRED:  freetype >= 2.8.0,gst-plugins-good >= 0.10.22,libXext >= 1.1.1,libXt >= 1.0.8
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
opera: Opera (Opera internet application suite)
opera:
opera: Opera is an freeware, lightweight Qt internet application suite
opera: containing a browser, and clients for email, RSS, and IRC.
opera:
opera: http://www.opera.com/
opera:
opera:
opera: Packager: vl70@vector.linux.net on 14-Feb-2011
opera:
opera:

PACKAGE NAME:  pidentd-3.0.19-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pidentd: pidentd (TCP/IP IDENT protocol server)
pidentd:
pidentd: The identd daemon implements the IDENT protocol as specified in
pidentd: RFC1413.  When your machine connects to a remote system, the remote
pidentd: machine may connect to your identd daemon to find out either the
pidentd: user name or other information about the process that initiated
pidentd: the connection.  Some remote machines may choose not to allow your
pidentd: connections if you do not provide access to an identd daemon.
pidentd:
pidentd: The pidentd daemon was written by Peter Eriksson.
pidentd:

PACKAGE NAME:  pidgin-2.7.11-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  7076 K
PACKAGE SIZE (uncompressed):  35780 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pidgin: pidgin (GTK+ instant messaging program)
pidgin:
pidgin: Pidgin allows you to talk to anyone using a variety of messaging
pidgin: protocols, including AIM (Oscar and TOC), ICQ, IRC, Yahoo!, MSN
pidgin: Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr.  These protocols
pidgin: are implemented using a modular, easy to use design.  To use a
pidgin: protocol, just load the plugin for it.
pidgin:
pidgin: For more info, see:  http://www.pidgin.im
pidgin:
pidgin:

PACKAGE NAME:  portmap-6.0-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
portmap: portmap (a daemon to manage RPC connections)
portmap:
portmap: The portmapper (/sbin/rpc.portmap) is a network daemon used to manage
portmap: connections to RPC services.  Daemons that offer RPC services (such
portmap: as the daemons for NFS) tell the portmapper on what port they listen. 
portmap: Unlike the services registered with the inetd, RPC network port
portmap: numbers may change each time the system is booted.
portmap:
portmap: The portmapper is required to use NFS or other RPC services.
portmap:
portmap:

PACKAGE NAME:  ppp-2.4.5-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  359 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ppp: ppp (Point-to-Point Protocol)
ppp:
ppp: The Point-to-Point Protocol (PPP) provides a method for transmitting
ppp: data over serial links.  It's commonly used for connecting to the
ppp: Internet using a modem.  This package includes the PPP daemon (pppd),
ppp: which negotiates with the peer to establish the link and sets up the
ppp: ppp network interface, and pppsetup, an easy-to-use utility for
ppp: setting up your PPP daemon.
ppp:
ppp:
ppp:

PACKAGE NAME:  procmail-3.22-x86_64-2.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  129 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
procmail: procmail (mail processing and local delivery program)
procmail:
procmail: Can be used to create mail-servers, mailing lists, sort your incoming
procmail: mail into separate folders/files (real convenient when subscribing to
procmail: one or more mailing lists or for prioritizing your mail), preprocess
procmail: your mail, start any programs upon mail arrival (e.g. to generate
procmail: different chimes on your workstation for different types of mail) or
procmail: selectively forward certain incoming mail automatically to someone.
procmail: Procmail is required by sendmail to deliver the local mail.
procmail: The author of procmail is Stephen R. van den Berg.
procmail:

PACKAGE NAME:  pth-2.0.7-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  98 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pth: pth (GNU Portable Threads)
pth:
pth: Pth is a very portable POSIX/ANSI-C based library for Unix platforms
pth: which provides non-preemptive priority-based scheduling for multiple
pth: threads of execution (aka `multithreading') inside event-driven
pth: applications.  All threads run in the same address space of the
pth: server application, but each thread has its own individual
pth: program-counter, run-time stack, signal mask and errno variable.
pth:
pth:
pth:

PACKAGE NAME:  rp-pppoe-3.10-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  82 K
PACKAGE SIZE (uncompressed):  290 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rp-pppoe: rp-pppoe (Roaring Penguin PPPoE client)
rp-pppoe:
rp-pppoe: PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
rp-pppoe: many ADSL Internet Service Providers. Roaring Penguin has a free
rp-pppoe: client for Linux systems to connect to PPPoE service providers.
rp-pppoe:
rp-pppoe: The client is a user-mode program and does not require any kernel
rp-pppoe: modifications. It is fully compliant with RFC 2516, the official
rp-pppoe: PPPoE specification.
rp-pppoe:
rp-pppoe:

PACKAGE NAME:  rsync-3.0.7-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  264 K
PACKAGE SIZE (uncompressed):  570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rsync: rsync (remote file sync)
rsync:
rsync: rsync is a replacement for rcp that has many more features.  It
rsync: uses the "rsync algorithm" which provides a very fast method for
rsync: bringing remote files into sync.  It does this by sending just the
rsync: differences in the files across the link, without requiring that both
rsync: sets of files are present at one of the ends of the link beforehand.
rsync:
rsync: rsync was written by Andrew Tridgell and Paul Mackerras.
rsync:
rsync:

PACKAGE NAME:  samba-3.5.8-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  13724 K
PACKAGE SIZE (uncompressed):  135580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
samba: samba (SMB/CIFS file and print server)
samba:
samba: Samba is an SMB/CIFS file and print server for SMB and CIFS clients.
samba: It allows you to make file space or printers on a Samba host
samba: available to SMB/CIFS clients (such as PCs running Windows).
samba:
samba: If you have any Windows file servers, you may be able to replace them
samba: or supplement them with Samba.  One of Samba's big strengths is
samba: integration, so you can use it to tie together your Linux hosts and
samba: Windows PC clients.
samba:

PACKAGE NAME:  tcpdump-4.1.1-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  367 K
PACKAGE SIZE (uncompressed):  1010 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tcpdump: tcpdump (network monitoring tool)
tcpdump:
tcpdump: Tcpdump is a tool for network monitoring and data acquisition.  You
tcpdump: can use it to dump information on all the packets on a network that
tcpdump: match a boolean expression.  Tcpdump uses libpcap, a system
tcpdump: independent interface for user-level packet capture.
tcpdump:
tcpdump: Project homepage:          http://sourceforge.net/projects/tcpdump/
tcpdump:
tcpdump:
tcpdump:

PACKAGE NAME:  traceroute-2.0.14-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
traceroute: traceroute (IP packet route tracing utility)
traceroute:
traceroute: The traceroute utility displays the route used by IP packets on their
traceroute: way to a specified network host.  Traceroute will display the IP
traceroute: number and host name (if possible) of all the machines along the route
traceroute: taken by the packets.  If you're having network connectivity problems,
traceroute: traceroute can show you where the trouble is located.
traceroute:
traceroute:
traceroute:
traceroute:

PACKAGE NAME:  wget-1.12-x86_64-1.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  434 K
PACKAGE SIZE (uncompressed):  1960 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wget: wget (a non-interactive network retriever)
wget:
wget: GNU Wget is a free network utility to retrieve files from the 
wget: World Wide Web using HTTP and FTP, the two most widely used Internet
wget: protocols.  It works non-interactively, thus enabling work in the
wget: background after having logged off.
wget:
wget: The author of Wget is Hrvoje Niksic <hniksic@srce.hr>.
wget:
wget:
wget:

PACKAGE NAME:  wicd-1.7.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  350 K
PACKAGE SIZE (uncompressed):  2010 K
PACKAGE REQUIRED:  python >= 2.7.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wicd: wicd ()
wicd:
wicd: 
wicd: 
wicd: 
wicd:
wicd:
wicd: License: GPL
wicd: Authors: 
wicd: Website: 

PACKAGE NAME:  wireless-tools-29-x86_64-6.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  127 K
PACKAGE SIZE (uncompressed):  510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wireless-tools: wireless-tools (utilities for wireless networking)
wireless-tools:
wireless-tools: This package contains tools and a library used for configuring
wireless-tools: wireless networking interfaces:
wireless-tools:   iwconfig (the main wireless tool),  iwlist (display more detailed
wireless-tools:   information than iwconfig),  iwspy (get stats per MAC address and
wireless-tools:   more),  iwpriv (set driver private ioctls),  iwgetid (show the
wireless-tools:   ESSID or NWID of a device),  iwevent (display wireless events),
wireless-tools:   ifrename (rename a network interface).
wireless-tools:
wireless-tools: The wireless-tools were written by Jean Tourrilhes.

PACKAGE NAME:  wpa_supplicant-0.7.3-x86_64-3.txz
PACKAGE LOCATION:  ./n
PACKAGE SIZE (compressed):  525 K
PACKAGE SIZE (uncompressed):  1550 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wpa_supplicant: wpa_supplicant (WPA/WPA2/IEEE 802.1X Supplicant)
wpa_supplicant:
wpa_supplicant: wpa_supplicant is a WPA Supplicant for Linux with support for WPA and
wpa_supplicant: WPA2 (IEEE 802.11i / RSN).  Supplicant is the IEEE 802.1X/WPA
wpa_supplicant: component that is used in the client stations.  It implements key
wpa_supplicant: negotiation with a WPA Authenticator and it controls the roaming and
wpa_supplicant: IEEE 802.11 authentication/association of the wlan driver.
wpa_supplicant:
wpa_supplicant: More info: http://hostap.epitest.fi/wpa_supplicant/
wpa_supplicant:
wpa_supplicant:

PACKAGE NAME:  expect-5.44.1.15-x86_64-1.txz
PACKAGE LOCATION:  ./tcl
PACKAGE SIZE (compressed):  294 K
PACKAGE SIZE (uncompressed):  1030 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
expect: expect (program that talks to other interactive programs)
expect:
expect: Expect is a program that talks to other interactive programs according
expect: to a script.  Following the script, Expect knows what can be expected
expect: from a program and what the correct response should be.  An
expect: interpreted language provides branching and high-level control
expect: structures to direct the dialogue. 
expect:
expect: Expect was written by Don Libes of the National Institute of Standards
expect: and Technology.
expect:

PACKAGE NAME:  tcl-8.5.9-x86_64-1.txz
PACKAGE LOCATION:  ./tcl
PACKAGE SIZE (compressed):  1686 K
PACKAGE SIZE (uncompressed):  5310 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tcl: tcl (Tool Command Language)
tcl:
tcl: Tcl, developed by Dr. John Ousterhout, is a simple to use text-based
tcl: script language with many built-in features which make it especially
tcl: nice for writing interactive scripts.
tcl:
tcl:
tcl:
tcl:
tcl:
tcl:

PACKAGE NAME:  tclx-8.4-x86_64-3.txz
PACKAGE LOCATION:  ./tcl
PACKAGE SIZE (compressed):  110 K
PACKAGE SIZE (uncompressed):  310 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tclx: tclx (Extended Tcl)
tclx:
tclx: Extended Tcl (TclX), is a set of extensions to Tcl, the Tool Command
tclx: Language invented by Dr. John Ousterhout. Extended Tcl is oriented
tclx: towards Unix system programming tasks and large application
tclx: development. Many additional interfaces to the Unix operating system
tclx: are provided. Extended Tcl was designed and implemented by Karl
tclx: Lehenbauer (karl@NeoSoft.com) and Mark Diekhans (markd@Grizzly.com),
tclx: with help in the early stages from Peter da Silva (peter@NeoSoft.com).
tclx:
tclx:

PACKAGE NAME:  tk-8.5.9-x86_64-1.txz
PACKAGE LOCATION:  ./tcl
PACKAGE SIZE (compressed):  1634 K
PACKAGE SIZE (uncompressed):  4450 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tk: tk (Tk toolkit for Tcl)
tk:
tk: Tk is an extension to Tcl that allows you to quickly and easily build
tk: X11 applications that have the look and feel of Motif apps.
tk:
tk:
tk:
tk:
tk:
tk:
tk:

PACKAGE NAME:  VL_Theme-0.1-noarch-11vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12951 K
PACKAGE SIZE (uncompressed):  44190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
VL_Theme: Theme for VectorLinux
VL_Theme: everything from lilo, Grub to KDM, GDM
VL_Theme: enjoy
VL_Theme: 

PACKAGE NAME:  appres-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
appres: appres
appres:
appres: appres is part of X11.
appres:
appres: For more information about the X.Org Foundation (the providers of the
appres: X.Org implementation of the X Window System), see their website:
appres:
appres: http://www.x.org
appres:
appres:
appres:

PACKAGE NAME:  bdftopcf-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bdftopcf: bdftopcf
bdftopcf:
bdftopcf: bdftopcf is part of X11.
bdftopcf:
bdftopcf: For more information about the X.Org Foundation (the providers of the
bdftopcf: X.Org implementation of the X Window System), see their website:
bdftopcf:
bdftopcf: http://www.x.org
bdftopcf:
bdftopcf:
bdftopcf:

PACKAGE NAME:  beforelight-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
beforelight: beforelight
beforelight:
beforelight: beforelight is part of X11.
beforelight:
beforelight: For more information about the X.Org Foundation (the providers of the
beforelight: X.Org implementation of the X Window System), see their website:
beforelight:
beforelight: http://www.x.org
beforelight:
beforelight:
beforelight:

PACKAGE NAME:  bigreqsproto-1.1.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bigreqsproto: bigreqsproto
bigreqsproto:
bigreqsproto: bigreqsproto is part of X11.
bigreqsproto:
bigreqsproto: For more information about the X.Org Foundation (the providers of the
bigreqsproto: X.Org implementation of the X Window System), see their website:
bigreqsproto:
bigreqsproto: http://www.x.org
bigreqsproto:
bigreqsproto:
bigreqsproto:

PACKAGE NAME:  bitmap-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  58 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
bitmap: bitmap
bitmap:
bitmap: bitmap is part of X11.
bitmap:
bitmap: For more information about the X.Org Foundation (the providers of the
bitmap: X.Org implementation of the X Window System), see their website:
bitmap:
bitmap: http://www.x.org
bitmap:
bitmap:
bitmap:

PACKAGE NAME:  compiz-0.8.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  735 K
PACKAGE SIZE (uncompressed):  5190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
compiz: compiz
compiz:
compiz: compiz is part of X11.
compiz:
compiz: For more information about the X.Org Foundation (the providers of the
compiz: X.Org implementation of the X Window System), see their website:
compiz:
compiz: http://www.x.org
compiz:
compiz:
compiz:

PACKAGE NAME:  compositeproto-0.4.2-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
compositeproto: compositeproto
compositeproto:
compositeproto: compositeproto is part of X11.
compositeproto:
compositeproto: For more information about the X.Org Foundation (the providers of the
compositeproto: X.Org implementation of the X Window System), see their website:
compositeproto:
compositeproto: http://www.x.org
compositeproto:
compositeproto:
compositeproto:

PACKAGE NAME:  damageproto-1.2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
damageproto: damageproto
damageproto:
damageproto: damageproto is part of X11.
damageproto:
damageproto: For more information about the X.Org Foundation (the providers of the
damageproto: X.Org implementation of the X Window System), see their website:
damageproto:
damageproto: http://www.x.org
damageproto:
damageproto:
damageproto:

PACKAGE NAME:  dejavu-fonts-ttf-2.33-noarch-1.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  2182 K
PACKAGE SIZE (uncompressed):  10540 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dejavu-fonts-ttf: dejavu-fonts-ttf (DejaVu fonts)
dejavu-fonts-ttf:
dejavu-fonts-ttf: The DejaVu fonts are a font family based on the Bitstream Vera Fonts
dejavu-fonts-ttf: (http://gnome.org/fonts/).  Its purpose is to provide a wider range
dejavu-fonts-ttf: of characters (see http://dejavu.sf.net for more information) while
dejavu-fonts-ttf: maintaining the original look and feel.
dejavu-fonts-ttf:
dejavu-fonts-ttf: DejaVu fonts are based on Bitstream Vera fonts version 1.10.
dejavu-fonts-ttf:
dejavu-fonts-ttf:
dejavu-fonts-ttf:

PACKAGE NAME:  dmxproto-2.3.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dmxproto: dmxproto
dmxproto:
dmxproto: dmxproto is part of X11.
dmxproto:
dmxproto: For more information about the X.Org Foundation (the providers of the
dmxproto: X.Org implementation of the X Window System), see their website:
dmxproto:
dmxproto: http://www.x.org
dmxproto:
dmxproto:
dmxproto:

PACKAGE NAME:  dri2proto-2.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dri2proto: dri2proto
dri2proto:
dri2proto: dri2proto is part of X11.
dri2proto:
dri2proto: For more information about the X.Org Foundation (the providers of the
dri2proto: X.Org implementation of the X Window System), see their website:
dri2proto:
dri2proto: http://www.x.org
dri2proto:
dri2proto:
dri2proto:

PACKAGE NAME:  editres-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
editres: editres
editres:
editres: editres is part of X11.
editres:
editres: For more information about the X.Org Foundation (the providers of the
editres: X.Org implementation of the X Window System), see their website:
editres:
editres: http://www.x.org
editres:
editres:
editres:

PACKAGE NAME:  encodings-1.0.4-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  565 K
PACKAGE SIZE (uncompressed):  710 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
encodings: encodings
encodings:
encodings: encodings is part of X11.
encodings:
encodings: For more information about the X.Org Foundation (the providers of the
encodings: X.Org implementation of the X Window System), see their website:
encodings:
encodings: http://www.x.org
encodings:
encodings:
encodings:

PACKAGE NAME:  evieext-1.1.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  9 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
evieext: evieext
evieext:
evieext: evieext is part of X11.
evieext:
evieext: For more information about the X.Org Foundation (the providers of the
evieext: X.Org implementation of the X Window System), see their website:
evieext:
evieext: http://www.x.org
evieext:
evieext:
evieext:

PACKAGE NAME:  fixesproto-5.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fixesproto: fixesproto
fixesproto:
fixesproto: fixesproto is part of X11.
fixesproto:
fixesproto: For more information about the X.Org Foundation (the providers of the
fixesproto: X.Org implementation of the X Window System), see their website:
fixesproto:
fixesproto: http://www.x.org
fixesproto:
fixesproto:
fixesproto:

PACKAGE NAME:  font-adobe-100dpi-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  6040 K
PACKAGE SIZE (uncompressed):  7070 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-adobe-100dpi: font-adobe-100dpi
font-adobe-100dpi:
font-adobe-100dpi: font-adobe-100dpi is part of X11.
font-adobe-100dpi:
font-adobe-100dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-100dpi: X.Org implementation of the X Window System), see their website:
font-adobe-100dpi:
font-adobe-100dpi: http://www.x.org
font-adobe-100dpi:
font-adobe-100dpi:
font-adobe-100dpi:

PACKAGE NAME:  font-adobe-75dpi-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  5346 K
PACKAGE SIZE (uncompressed):  6380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-adobe-75dpi: font-adobe-75dpi
font-adobe-75dpi:
font-adobe-75dpi: font-adobe-75dpi is part of X11.
font-adobe-75dpi:
font-adobe-75dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-75dpi: X.Org implementation of the X Window System), see their website:
font-adobe-75dpi:
font-adobe-75dpi: http://www.x.org
font-adobe-75dpi:
font-adobe-75dpi:
font-adobe-75dpi:

PACKAGE NAME:  font-alias-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  9 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-alias: font-alias
font-alias:
font-alias: font-alias is part of X11.
font-alias:
font-alias: For more information about the X.Org Foundation (the providers of the
font-alias: X.Org implementation of the X Window System), see their website:
font-alias:
font-alias: http://www.x.org
font-alias:
font-alias:
font-alias:

PACKAGE NAME:  font-bh-ttf-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  278 K
PACKAGE SIZE (uncompressed):  950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-bh-ttf: font-bh-ttf
font-bh-ttf:
font-bh-ttf: font-bh-ttf is part of X11.
font-bh-ttf:
font-bh-ttf: For more information about the X.Org Foundation (the providers of the
font-bh-ttf: X.Org implementation of the X Window System), see their website:
font-bh-ttf:
font-bh-ttf: http://www.x.org
font-bh-ttf:
font-bh-ttf:
font-bh-ttf:

PACKAGE NAME:  font-bh-type1-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  524 K
PACKAGE SIZE (uncompressed):  1330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-bh-type1: font-bh-type1
font-bh-type1:
font-bh-type1: font-bh-type1 is part of X11.
font-bh-type1:
font-bh-type1: For more information about the X.Org Foundation (the providers of the
font-bh-type1: X.Org implementation of the X Window System), see their website:
font-bh-type1:
font-bh-type1: http://www.x.org
font-bh-type1:
font-bh-type1:
font-bh-type1:

PACKAGE NAME:  font-bitstream-type1-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  300 K
PACKAGE SIZE (uncompressed):  490 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-bitstream-type1: font-bitstream-type1
font-bitstream-type1:
font-bitstream-type1: font-bitstream-type1 is part of X11.
font-bitstream-type1:
font-bitstream-type1: For more information about the X.Org Foundation (the providers of the
font-bitstream-type1: X.Org implementation of the X Window System), see their website:
font-bitstream-type1:
font-bitstream-type1: http://www.x.org
font-bitstream-type1:
font-bitstream-type1:
font-bitstream-type1:

PACKAGE NAME:  font-cursor-misc-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-cursor-misc: font-cursor-misc
font-cursor-misc:
font-cursor-misc: font-cursor-misc is part of X11.
font-cursor-misc:
font-cursor-misc: For more information about the X.Org Foundation (the providers of the
font-cursor-misc: X.Org implementation of the X Window System), see their website:
font-cursor-misc:
font-cursor-misc: http://www.x.org
font-cursor-misc:
font-cursor-misc:
font-cursor-misc:

PACKAGE NAME:  font-misc-misc-1.1.2-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  3439 K
PACKAGE SIZE (uncompressed):  4450 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-misc-misc: font-misc-misc
font-misc-misc:
font-misc-misc: font-misc-misc is part of X11.
font-misc-misc:
font-misc-misc: For more information about the X.Org Foundation (the providers of the
font-misc-misc: X.Org implementation of the X Window System), see their website:
font-misc-misc:
font-misc-misc: http://www.x.org
font-misc-misc:
font-misc-misc:
font-misc-misc:

PACKAGE NAME:  font-util-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-util: font-util
font-util:
font-util: font-util is part of X11.
font-util:
font-util: For more information about the X.Org Foundation (the providers of the
font-util: X.Org implementation of the X Window System), see their website:
font-util:
font-util: http://www.x.org
font-util:
font-util:
font-util:

PACKAGE NAME:  font-xfree86-type1-1.0.4-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
font-xfree86-type1: font-xfree86-type1
font-xfree86-type1:
font-xfree86-type1: font-xfree86-type1 is part of X11.
font-xfree86-type1:
font-xfree86-type1: For more information about the X.Org Foundation (the providers of the
font-xfree86-type1: X.Org implementation of the X Window System), see their website:
font-xfree86-type1:
font-xfree86-type1: http://www.x.org
font-xfree86-type1:
font-xfree86-type1:
font-xfree86-type1:

PACKAGE NAME:  fontcacheproto-0.1.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  5 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fontcacheproto: fontcacheproto
fontcacheproto:
fontcacheproto: fontcacheproto is part of X11.
fontcacheproto:
fontcacheproto: For more information about the X.Org Foundation (the providers of the
fontcacheproto: X.Org implementation of the X Window System), see their website:
fontcacheproto:
fontcacheproto: http://www.x.org
fontcacheproto:
fontcacheproto:
fontcacheproto:

PACKAGE NAME:  fontconfig-2.8.0-x86_64-1.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  265 K
PACKAGE SIZE (uncompressed):  1090 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fontconfig: fontconfig (Font library and tools)
fontconfig:
fontconfig: Fontconfig is a library and tools designed to provide system-wide
fontconfig: font configuration, customization, and application access.
fontconfig:
fontconfig: Fontconfig is written and maintained by Keith Packard.
fontconfig:
fontconfig:
fontconfig:
fontconfig:
fontconfig:

PACKAGE NAME:  fontsproto-2.1.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fontsproto: fontsproto
fontsproto:
fontsproto: fontsproto is part of X11.
fontsproto:
fontsproto: For more information about the X.Org Foundation (the providers of the
fontsproto: X.Org implementation of the X Window System), see their website:
fontsproto:
fontsproto: http://www.x.org
fontsproto:
fontsproto:
fontsproto:

PACKAGE NAME:  fonttosfnt-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fonttosfnt: fonttosfnt
fonttosfnt:
fonttosfnt: fonttosfnt is part of X11.
fonttosfnt:
fonttosfnt: For more information about the X.Org Foundation (the providers of the
fonttosfnt: X.Org implementation of the X Window System), see their website:
fonttosfnt:
fonttosfnt: http://www.x.org
fonttosfnt:
fonttosfnt:
fonttosfnt:

PACKAGE NAME:  fslsfonts-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fslsfonts: fslsfonts
fslsfonts:
fslsfonts: fslsfonts is part of X11.
fslsfonts:
fslsfonts: For more information about the X.Org Foundation (the providers of the
fslsfonts: X.Org implementation of the X Window System), see their website:
fslsfonts:
fslsfonts: http://www.x.org
fslsfonts:
fslsfonts:
fslsfonts:

PACKAGE NAME:  fstobdf-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fstobdf: fstobdf
fstobdf:
fstobdf: fstobdf is part of X11.
fstobdf:
fstobdf: For more information about the X.Org Foundation (the providers of the
fstobdf: X.Org implementation of the X Window System), see their website:
fstobdf:
fstobdf: http://www.x.org
fstobdf:
fstobdf:
fstobdf:

PACKAGE NAME:  gccmakedep-1.0.2-noarch-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  3 K
PACKAGE SIZE (uncompressed):  20 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gccmakedep: gccmakedep
gccmakedep:
gccmakedep: gccmakedep is part of X11.
gccmakedep:
gccmakedep: For more information about the X.Org Foundation (the providers of the
gccmakedep: X.Org implementation of the X Window System), see their website:
gccmakedep:
gccmakedep: http://www.x.org
gccmakedep:
gccmakedep:
gccmakedep:

PACKAGE NAME:  glproto-1.4.12-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  21 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glproto: glproto
glproto:
glproto: glproto is part of X11.
glproto:
glproto: For more information about the X.Org Foundation (the providers of the
glproto: X.Org implementation of the X Window System), see their website:
glproto:
glproto: http://www.x.org
glproto:
glproto:
glproto:

PACKAGE NAME:  iceauth-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
iceauth: iceauth
iceauth:
iceauth: iceauth is part of X11.
iceauth:
iceauth: For more information about the X.Org Foundation (the providers of the
iceauth: X.Org implementation of the X Window System), see their website:
iceauth:
iceauth: http://www.x.org
iceauth:
iceauth:
iceauth:

PACKAGE NAME:  ico-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  21 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ico: ico
ico:
ico: ico is part of X11.
ico:
ico: For more information about the X.Org Foundation (the providers of the
ico: X.Org implementation of the X Window System), see their website:
ico:
ico: http://www.x.org
ico:
ico:
ico:

PACKAGE NAME:  imake-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  37 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
imake: imake
imake:
imake: imake is part of X11.
imake:
imake: For more information about the X.Org Foundation (the providers of the
imake: X.Org implementation of the X Window System), see their website:
imake:
imake: http://www.x.org
imake:
imake:
imake:

PACKAGE NAME:  inputproto-2.0.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  58 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
inputproto: inputproto
inputproto:
inputproto: inputproto is part of X11.
inputproto:
inputproto: For more information about the X.Org Foundation (the providers of the
inputproto: X.Org implementation of the X Window System), see their website:
inputproto:
inputproto: http://www.x.org
inputproto:
inputproto:
inputproto:

PACKAGE NAME:  intel-gpu-tools-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
intel-gpu-tools: intel-gpu-tools (Intel DRM Driver Testing Tools)
intel-gpu-tools: 
intel-gpu-tools: This is a collection of tools for development and testing of the Intel
intel-gpu-tools: DRM driver.  There are many macro-level test suites including xtest,
intel-gpu-tools: rendercheck, piglit, and oglconform.
intel-gpu-tools: 
intel-gpu-tools: 
intel-gpu-tools: 
intel-gpu-tools: 
intel-gpu-tools: 
intel-gpu-tools: 

PACKAGE NAME:  kbproto-1.0.5-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kbproto: kbproto
kbproto:
kbproto: kbproto is part of X11.
kbproto:
kbproto: For more information about the X.Org Foundation (the providers of the
kbproto: X.Org implementation of the X Window System), see their website:
kbproto:
kbproto: http://www.x.org
kbproto:
kbproto:
kbproto:

PACKAGE NAME:  libFS-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  34 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libFS: libFS
libFS:
libFS: libFS is part of X11.
libFS:
libFS: For more information about the X.Org Foundation (the providers of the
libFS: X.Org implementation of the X Window System), see their website:
libFS:
libFS: http://www.x.org
libFS:
libFS:
libFS:

PACKAGE NAME:  libICE-1.0.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  92 K
PACKAGE SIZE (uncompressed):  640 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libICE: libICE
libICE:
libICE: libICE is part of X11.
libICE:
libICE: For more information about the X.Org Foundation (the providers of the
libICE: X.Org implementation of the X Window System), see their website:
libICE:
libICE: http://www.x.org
libICE:
libICE:
libICE:

PACKAGE NAME:  libSM-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  55 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libSM: libSM
libSM:
libSM: libSM is part of X11.
libSM:
libSM: For more information about the X.Org Foundation (the providers of the
libSM: X.Org implementation of the X Window System), see their website:
libSM:
libSM: http://www.x.org
libSM:
libSM:
libSM:

PACKAGE NAME:  libX11-1.4.3-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  2252 K
PACKAGE SIZE (uncompressed):  15890 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libX11: libX11
libX11:
libX11: libX11 is part of X11.
libX11:
libX11: For more information about the X.Org Foundation (the providers of the
libX11: X.Org implementation of the X Window System), see their website:
libX11:
libX11: http://www.x.org
libX11:
libX11:
libX11:

PACKAGE NAME:  libXScrnSaver-1.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXScrnSaver: libXScrnSaver
libXScrnSaver:
libXScrnSaver: libXScrnSaver is part of X11.
libXScrnSaver:
libXScrnSaver: For more information about the X.Org Foundation (the providers of the
libXScrnSaver: X.Org implementation of the X Window System), see their website:
libXScrnSaver:
libXScrnSaver: http://www.x.org
libXScrnSaver:
libXScrnSaver:
libXScrnSaver:

PACKAGE NAME:  libXau-1.0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXau: libXau
libXau:
libXau: libXau is part of X11.
libXau:
libXau: For more information about the X.Org Foundation (the providers of the
libXau: X.Org implementation of the X Window System), see their website:
libXau:
libXau: http://www.x.org
libXau:
libXau:
libXau:

PACKAGE NAME:  libXaw-1.0.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  355 K
PACKAGE SIZE (uncompressed):  2370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXaw: libXaw
libXaw:
libXaw: libXaw is part of X11.
libXaw:
libXaw: For more information about the X.Org Foundation (the providers of the
libXaw: X.Org implementation of the X Window System), see their website:
libXaw:
libXaw: http://www.x.org
libXaw:
libXaw:
libXaw:

PACKAGE NAME:  libXcomposite-0.4.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXcomposite: libXcomposite
libXcomposite:
libXcomposite: libXcomposite is part of X11.
libXcomposite:
libXcomposite: For more information about the X.Org Foundation (the providers of the
libXcomposite: X.Org implementation of the X Window System), see their website:
libXcomposite:
libXcomposite: http://www.x.org
libXcomposite:
libXcomposite:
libXcomposite:

PACKAGE NAME:  libXcursor-1.1.11-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  36 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXcursor: libXcursor
libXcursor:
libXcursor: libXcursor is part of X11.
libXcursor:
libXcursor: For more information about the X.Org Foundation (the providers of the
libXcursor: X.Org implementation of the X Window System), see their website:
libXcursor:
libXcursor: http://www.x.org
libXcursor:
libXcursor:
libXcursor:

PACKAGE NAME:  libXdamage-1.1.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXdamage: libXdamage
libXdamage:
libXdamage: libXdamage is part of X11.
libXdamage:
libXdamage: For more information about the X.Org Foundation (the providers of the
libXdamage: X.Org implementation of the X Window System), see their website:
libXdamage:
libXdamage: http://www.x.org
libXdamage:
libXdamage:
libXdamage:

PACKAGE NAME:  libXdmcp-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXdmcp: libXdmcp
libXdmcp:
libXdmcp: libXdmcp is part of X11.
libXdmcp:
libXdmcp: For more information about the X.Org Foundation (the providers of the
libXdmcp: X.Org implementation of the X Window System), see their website:
libXdmcp:
libXdmcp: http://www.x.org
libXdmcp:
libXdmcp:
libXdmcp:

PACKAGE NAME:  libXevie-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXevie: libXevie
libXevie:
libXevie: libXevie is part of X11.
libXevie:
libXevie: For more information about the X.Org Foundation (the providers of the
libXevie: X.Org implementation of the X Window System), see their website:
libXevie:
libXevie: http://www.x.org
libXevie:
libXevie:
libXevie:

PACKAGE NAME:  libXext-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  114 K
PACKAGE SIZE (uncompressed):  510 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXext: libXext
libXext:
libXext: libXext is part of X11.
libXext:
libXext: For more information about the X.Org Foundation (the providers of the
libXext: X.Org implementation of the X Window System), see their website:
libXext:
libXext: http://www.x.org
libXext:
libXext:
libXext:

PACKAGE NAME:  libXfixes-5.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXfixes: libXfixes
libXfixes:
libXfixes: libXfixes is part of X11.
libXfixes:
libXfixes: For more information about the X.Org Foundation (the providers of the
libXfixes: X.Org implementation of the X Window System), see their website:
libXfixes:
libXfixes: http://www.x.org
libXfixes:
libXfixes:
libXfixes:

PACKAGE NAME:  libXfont-1.4.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  133 K
PACKAGE SIZE (uncompressed):  380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXfont: libXfont
libXfont:
libXfont: libXfont is part of X11.
libXfont:
libXfont: For more information about the X.Org Foundation (the providers of the
libXfont: X.Org implementation of the X Window System), see their website:
libXfont:
libXfont: http://www.x.org
libXfont:
libXfont:
libXfont:

PACKAGE NAME:  libXfontcache-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXfontcache: libXfontcache
libXfontcache:
libXfontcache: libXfontcache is part of X11.
libXfontcache:
libXfontcache: For more information about the X.Org Foundation (the providers of the
libXfontcache: X.Org implementation of the X Window System), see their website:
libXfontcache:
libXfontcache: http://www.x.org
libXfontcache:
libXfontcache:
libXfontcache:

PACKAGE NAME:  libXft-2.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  55 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXft: libXft
libXft:
libXft: libXft is part of X11.
libXft:
libXft: For more information about the X.Org Foundation (the providers of the
libXft: X.Org implementation of the X Window System), see their website:
libXft:
libXft: http://www.x.org
libXft:
libXft:
libXft:

PACKAGE NAME:  libXi-1.4.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  165 K
PACKAGE SIZE (uncompressed):  950 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXi: libXi
libXi:
libXi: libXi is part of X11.
libXi:
libXi: For more information about the X.Org Foundation (the providers of the
libXi: X.Org implementation of the X Window System), see their website:
libXi:
libXi: http://www.x.org
libXi:
libXi:
libXi:

PACKAGE NAME:  libXinerama-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXinerama: libXinerama
libXinerama:
libXinerama: libXinerama is part of X11.
libXinerama:
libXinerama: For more information about the X.Org Foundation (the providers of the
libXinerama: X.Org implementation of the X Window System), see their website:
libXinerama:
libXinerama: http://www.x.org
libXinerama:
libXinerama:
libXinerama:

PACKAGE NAME:  libXmu-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  88 K
PACKAGE SIZE (uncompressed):  570 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXmu: libXmu
libXmu:
libXmu: libXmu is part of X11.
libXmu:
libXmu: For more information about the X.Org Foundation (the providers of the
libXmu: X.Org implementation of the X Window System), see their website:
libXmu:
libXmu: http://www.x.org
libXmu:
libXmu:
libXmu:

PACKAGE NAME:  libXp-1.0.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  81 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXp: libXp
libXp:
libXp: libXp is part of X11.
libXp:
libXp: For more information about the X.Org Foundation (the providers of the
libXp: X.Org implementation of the X Window System), see their website:
libXp:
libXp: http://www.x.org
libXp:
libXp:
libXp:

PACKAGE NAME:  libXpm-3.5.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  71 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXpm: libXpm
libXpm:
libXpm: libXpm is part of X11.
libXpm:
libXpm: For more information about the X.Org Foundation (the providers of the
libXpm: X.Org implementation of the X Window System), see their website:
libXpm:
libXpm: http://www.x.org
libXpm:
libXpm:
libXpm:

PACKAGE NAME:  libXrandr-1.3.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXrandr: libXrandr
libXrandr:
libXrandr: libXrandr is part of X11.
libXrandr:
libXrandr: For more information about the X.Org Foundation (the providers of the
libXrandr: X.Org implementation of the X Window System), see their website:
libXrandr:
libXrandr: http://www.x.org
libXrandr:
libXrandr:
libXrandr:

PACKAGE NAME:  libXrender-0.9.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXrender: libXrender
libXrender:
libXrender: libXrender is part of X11.
libXrender:
libXrender: For more information about the X.Org Foundation (the providers of the
libXrender: X.Org implementation of the X Window System), see their website:
libXrender:
libXrender: http://www.x.org
libXrender:
libXrender:
libXrender:

PACKAGE NAME:  libXres-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXres: libXres
libXres:
libXres: libXres is part of X11.
libXres:
libXres: For more information about the X.Org Foundation (the providers of the
libXres: X.Org implementation of the X Window System), see their website:
libXres:
libXres: http://www.x.org
libXres:
libXres:
libXres:

PACKAGE NAME:  libXt-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  408 K
PACKAGE SIZE (uncompressed):  1220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXt: libXt
libXt:
libXt: libXt is part of X11.
libXt:
libXt: For more information about the X.Org Foundation (the providers of the
libXt: X.Org implementation of the X Window System), see their website:
libXt:
libXt: http://www.x.org
libXt:
libXt:
libXt:

PACKAGE NAME:  libXtst-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXtst: libXtst
libXtst:
libXtst: libXtst is part of X11.
libXtst:
libXtst: For more information about the X.Org Foundation (the providers of the
libXtst: X.Org implementation of the X Window System), see their website:
libXtst:
libXtst: http://www.x.org
libXtst:
libXtst:
libXtst:

PACKAGE NAME:  libXv-1.0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  42 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXv: libXv
libXv:
libXv: libXv is part of X11.
libXv:
libXv: For more information about the X.Org Foundation (the providers of the
libXv: X.Org implementation of the X Window System), see their website:
libXv:
libXv: http://www.x.org
libXv:
libXv:
libXv:

PACKAGE NAME:  libXvMC-1.0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  29 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXvMC: libXvMC
libXvMC:
libXvMC: libXvMC is part of X11.
libXvMC:
libXvMC: For more information about the X.Org Foundation (the providers of the
libXvMC: X.Org implementation of the X Window System), see their website:
libXvMC:
libXvMC: http://www.x.org
libXvMC:
libXvMC:
libXvMC:

PACKAGE NAME:  libXxf86dga-1.1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXxf86dga: libXxf86dga
libXxf86dga:
libXxf86dga: libXxf86dga is part of X11.
libXxf86dga:
libXxf86dga: For more information about the X.Org Foundation (the providers of the
libXxf86dga: X.Org implementation of the X Window System), see their website:
libXxf86dga:
libXxf86dga: http://www.x.org
libXxf86dga:
libXxf86dga:
libXxf86dga:

PACKAGE NAME:  libXxf86misc-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXxf86misc: libXxf86misc
libXxf86misc:
libXxf86misc: libXxf86misc is part of X11.
libXxf86misc:
libXxf86misc: For more information about the X.Org Foundation (the providers of the
libXxf86misc: X.Org implementation of the X Window System), see their website:
libXxf86misc:
libXxf86misc: http://www.x.org
libXxf86misc:
libXxf86misc:
libXxf86misc:

PACKAGE NAME:  libXxf86vm-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libXxf86vm: libXxf86vm
libXxf86vm:
libXxf86vm: libXxf86vm is part of X11.
libXxf86vm:
libXxf86vm: For more information about the X.Org Foundation (the providers of the
libXxf86vm: X.Org implementation of the X Window System), see their website:
libXxf86vm:
libXxf86vm: http://www.x.org
libXxf86vm:
libXxf86vm:
libXxf86vm:

PACKAGE NAME:  libdmx-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdmx: libdmx
libdmx:
libdmx: libdmx is part of X11.
libdmx:
libdmx: For more information about the X.Org Foundation (the providers of the
libdmx: X.Org implementation of the X Window System), see their website:
libdmx:
libdmx: http://www.x.org
libdmx:
libdmx:
libdmx:

PACKAGE NAME:  libdrm-2.4.23-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libdrm: libdrm (A library to support Direct Rendering)
libdrm:
libdrm: This library implements an interface to the kernel's DRM services.
libdrm: It is used to support hardware accelerated 3-D rendering.
libdrm:
libdrm:
libdrm:
libdrm:
libdrm:
libdrm:
libdrm:

PACKAGE NAME:  liberation-fonts-ttf-1.06.0.20100721-noarch-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  810 K
PACKAGE SIZE (uncompressed):  2110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
liberation-fonts-ttf: liberation-fonts-ttf (Liberation TTF Fonts)
liberation-fonts-ttf:
liberation-fonts-ttf: Liberation is the collective name of three TrueType font
liberation-fonts-ttf: families: Liberation Sans, Liberation Serif and Liberation
liberation-fonts-ttf: Mono.  These fonts are metric-compatible with Arial, Times
liberation-fonts-ttf: New Roman, and Courier New respectively.
liberation-fonts-ttf:
liberation-fonts-ttf: The fonts were developed by Steve Matteson of Ascender Corp.
liberation-fonts-ttf: for Red Hat, Inc.
liberation-fonts-ttf:
liberation-fonts-ttf:

PACKAGE NAME:  libfontenc-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libfontenc: libfontenc
libfontenc:
libfontenc: libfontenc is part of X11.
libfontenc:
libfontenc: For more information about the X.Org Foundation (the providers of the
libfontenc: X.Org implementation of the X Window System), see their website:
libfontenc:
libfontenc: http://www.x.org
libfontenc:
libfontenc:
libfontenc:

PACKAGE NAME:  libpciaccess-0.12.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libpciaccess: libpciaccess
libpciaccess:
libpciaccess: libpciaccess is part of X11.
libpciaccess:
libpciaccess: For more information about the X.Org Foundation (the providers of the
libpciaccess: X.Org implementation of the X Window System), see their website:
libpciaccess:
libpciaccess: http://www.x.org
libpciaccess:
libpciaccess:
libpciaccess:

PACKAGE NAME:  libpthread-stubs-0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  1 K
PACKAGE SIZE (uncompressed):  20 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libpthread-stubs: libpthread-stubs
libpthread-stubs:
libpthread-stubs: libpthread-stubs is part of X11.
libpthread-stubs:
libpthread-stubs: For more information about the X.Org Foundation (the providers of the
libpthread-stubs: X.Org implementation of the X Window System), see their website:
libpthread-stubs:
libpthread-stubs: http://www.x.org
libpthread-stubs:
libpthread-stubs:
libpthread-stubs:

PACKAGE NAME:  libxcb-1.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  218 K
PACKAGE SIZE (uncompressed):  3040 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxcb: libxcb (X protocol C-language Binding)
libxcb:
libxcb: The XCB library provides an interface to the X Window System protocol
libxcb: which is fully capable of replacing Xlib.  In fact, libX11 makes use
libxcb: of libxcb as much as possible.  :-)  Porting to XCB has several
libxcb: advantages such as a smaller memory footprint, latency hiding, direct
libxcb: protocol access, and improved thread support.
libxcb:
libxcb:
libxcb:
libxcb:

PACKAGE NAME:  libxkbfile-1.0.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  74 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libxkbfile: libxkbfile
libxkbfile:
libxkbfile: libxkbfile is part of X11.
libxkbfile:
libxkbfile: For more information about the X.Org Foundation (the providers of the
libxkbfile: X.Org implementation of the X Window System), see their website:
libxkbfile:
libxkbfile: http://www.x.org
libxkbfile:
libxkbfile:
libxkbfile:

PACKAGE NAME:  listres-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
listres: listres
listres:
listres: listres is part of X11.
listres:
listres: For more information about the X.Org Foundation (the providers of the
listres: X.Org implementation of the X Window System), see their website:
listres:
listres: http://www.x.org
listres:
listres:
listres:

PACKAGE NAME:  lndir-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lndir: lndir
lndir:
lndir: lndir is part of X11.
lndir:
lndir: For more information about the X.Org Foundation (the providers of the
lndir: X.Org implementation of the X Window System), see their website:
lndir:
lndir: http://www.x.org
lndir:
lndir:
lndir:

PACKAGE NAME:  luit-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
luit: luit
luit:
luit: luit is part of X11.
luit:
luit: For more information about the X.Org Foundation (the providers of the
luit: X.Org implementation of the X Window System), see their website:
luit:
luit: http://www.x.org
luit:
luit:
luit:

PACKAGE NAME:  makedepend-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  23 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
makedepend: makedepend
makedepend:
makedepend: makedepend is part of X11.
makedepend:
makedepend: For more information about the X.Org Foundation (the providers of the
makedepend: X.Org implementation of the X Window System), see their website:
makedepend:
makedepend: http://www.x.org
makedepend:
makedepend:
makedepend:

PACKAGE NAME:  mesa-7.9.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  5257 K
PACKAGE SIZE (uncompressed):  71160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mesa: mesa (a 3-D graphics library)
mesa:
mesa: Mesa is a 3-D graphics library with an API very similar to that of
mesa: another well-known 3-D graphics library.  :-)  The Mesa libraries are
mesa: used by X to provide both software and hardware accelerated graphics.
mesa:
mesa: Mesa was written by Brian Paul.
mesa:
mesa:
mesa:
mesa:

PACKAGE NAME:  mkcomposecache-1.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  9 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mkcomposecache: mkcomposecache
mkcomposecache:
mkcomposecache: mkcomposecache is part of X11.
mkcomposecache:
mkcomposecache: For more information about the X.Org Foundation (the providers of the
mkcomposecache: X.Org implementation of the X Window System), see their website:
mkcomposecache:
mkcomposecache: http://www.x.org
mkcomposecache:
mkcomposecache:
mkcomposecache:

PACKAGE NAME:  mkfontdir-1.0.6-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mkfontdir: mkfontdir
mkfontdir:
mkfontdir: mkfontdir is part of X11.
mkfontdir:
mkfontdir: For more information about the X.Org Foundation (the providers of the
mkfontdir: X.Org implementation of the X Window System), see their website:
mkfontdir:
mkfontdir: http://www.x.org
mkfontdir:
mkfontdir:
mkfontdir:

PACKAGE NAME:  mkfontscale-1.0.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
mkfontscale: mkfontscale
mkfontscale:
mkfontscale: mkfontscale is part of X11.
mkfontscale:
mkfontscale: For more information about the X.Org Foundation (the providers of the
mkfontscale: X.Org implementation of the X Window System), see their website:
mkfontscale:
mkfontscale: http://www.x.org
mkfontscale:
mkfontscale:
mkfontscale:

PACKAGE NAME:  oclock-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
oclock: oclock
oclock:
oclock: oclock is part of X11.
oclock:
oclock: For more information about the X.Org Foundation (the providers of the
oclock: X.Org implementation of the X Window System), see their website:
oclock:
oclock: http://www.x.org
oclock:
oclock:
oclock:

PACKAGE NAME:  pixman-0.20.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  160 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pixman: pixman
pixman:
pixman: pixman contains low-level pixel manipulation routines and is used by
pixman: both xorg and cairo.
pixman:
pixman: For more information about the X.Org Foundation (the providers of the
pixman: X.Org implementation of the X Window System), see their website:
pixman:
pixman: http://www.x.org
pixman:
pixman:

PACKAGE NAME:  printproto-1.0.5-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
printproto: printproto
printproto:
printproto: printproto is part of X11.
printproto:
printproto: For more information about the X.Org Foundation (the providers of the
printproto: X.Org implementation of the X Window System), see their website:
printproto:
printproto: http://www.x.org
printproto:
printproto:
printproto:

PACKAGE NAME:  randrproto-1.3.2-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  160 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
randrproto: randrproto
randrproto:
randrproto: randrproto is part of X11.
randrproto:
randrproto: For more information about the X.Org Foundation (the providers of the
randrproto: X.Org implementation of the X Window System), see their website:
randrproto:
randrproto: http://www.x.org
randrproto:
randrproto:
randrproto:

PACKAGE NAME:  recordproto-1.14.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  180 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
recordproto: recordproto
recordproto:
recordproto: recordproto is part of X11.
recordproto:
recordproto: For more information about the X.Org Foundation (the providers of the
recordproto: X.Org implementation of the X Window System), see their website:
recordproto:
recordproto: http://www.x.org
recordproto:
recordproto:
recordproto:

PACKAGE NAME:  rendercheck-1.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  32 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rendercheck: rendercheck
rendercheck:
rendercheck: rendercheck is part of X11.
rendercheck:
rendercheck: For more information about the X.Org Foundation (the providers of the
rendercheck: X.Org implementation of the X Window System), see their website:
rendercheck:
rendercheck: http://www.x.org
rendercheck:
rendercheck:
rendercheck:

PACKAGE NAME:  renderproto-0.11.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
renderproto: renderproto
renderproto:
renderproto: renderproto is part of X11.
renderproto:
renderproto: For more information about the X.Org Foundation (the providers of the
renderproto: X.Org implementation of the X Window System), see their website:
renderproto:
renderproto: http://www.x.org
renderproto:
renderproto:
renderproto:

PACKAGE NAME:  resourceproto-1.1.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  9 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
resourceproto: resourceproto
resourceproto:
resourceproto: resourceproto is part of X11.
resourceproto:
resourceproto: For more information about the X.Org Foundation (the providers of the
resourceproto: X.Org implementation of the X Window System), see their website:
resourceproto:
resourceproto: http://www.x.org
resourceproto:
resourceproto:
resourceproto:

PACKAGE NAME:  rgb-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
rgb: rgb
rgb:
rgb: rgb is part of X11.
rgb:
rgb: For more information about the X.Org Foundation (the providers of the
rgb: X.Org implementation of the X Window System), see their website:
rgb:
rgb: http://www.x.org
rgb:
rgb:
rgb:

PACKAGE NAME:  scripts-1.0.1-noarch-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  6 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
scripts: scripts
scripts:
scripts: scripts is part of X11.
scripts:
scripts: For more information about the X.Org Foundation (the providers of the
scripts: X.Org implementation of the X Window System), see their website:
scripts:
scripts: http://www.x.org
scripts:
scripts:
scripts:

PACKAGE NAME:  scrnsaverproto-1.2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
scrnsaverproto: scrnsaverproto
scrnsaverproto:
scrnsaverproto: scrnsaverproto is part of X11.
scrnsaverproto:
scrnsaverproto: For more information about the X.Org Foundation (the providers of the
scrnsaverproto: X.Org implementation of the X Window System), see their website:
scrnsaverproto:
scrnsaverproto: http://www.x.org
scrnsaverproto:
scrnsaverproto:
scrnsaverproto:

PACKAGE NAME:  sessreg-1.0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sessreg: sessreg
sessreg:
sessreg: sessreg is part of X11.
sessreg:
sessreg: For more information about the X.Org Foundation (the providers of the
sessreg: X.Org implementation of the X Window System), see their website:
sessreg:
sessreg: http://www.x.org
sessreg:
sessreg:
sessreg:

PACKAGE NAME:  setxkbmap-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
setxkbmap: setxkbmap
setxkbmap:
setxkbmap: setxkbmap is part of X11.
setxkbmap:
setxkbmap: For more information about the X.Org Foundation (the providers of the
setxkbmap: X.Org implementation of the X Window System), see their website:
setxkbmap:
setxkbmap: http://www.x.org
setxkbmap:
setxkbmap:
setxkbmap:

PACKAGE NAME:  showfont-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
showfont: showfont
showfont:
showfont: showfont is part of X11.
showfont:
showfont: For more information about the X.Org Foundation (the providers of the
showfont: X.Org implementation of the X Window System), see their website:
showfont:
showfont: http://www.x.org
showfont:
showfont:
showfont:

PACKAGE NAME:  smproxy-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
smproxy: smproxy
smproxy:
smproxy: smproxy is part of X11.
smproxy:
smproxy: For more information about the X.Org Foundation (the providers of the
smproxy: X.Org implementation of the X Window System), see their website:
smproxy:
smproxy: http://www.x.org
smproxy:
smproxy:
smproxy:

PACKAGE NAME:  twm-1.0.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  104 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
twm: twm
twm:
twm: twm is part of X11.
twm:
twm: For more information about the X.Org Foundation (the providers of the
twm: X.Org implementation of the X Window System), see their website:
twm:
twm: http://www.x.org
twm:
twm:
twm:

PACKAGE NAME:  util-macros-1.13.0-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
util-macros: util-macros
util-macros:
util-macros: util-macros is part of X11.
util-macros:
util-macros: For more information about the X.Org Foundation (the providers of the
util-macros: X.Org implementation of the X Window System), see their website:
util-macros:
util-macros: http://www.x.org
util-macros:
util-macros:
util-macros:

PACKAGE NAME:  videoproto-2.3.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
videoproto: videoproto
videoproto:
videoproto: videoproto is part of X11.
videoproto:
videoproto: For more information about the X.Org Foundation (the providers of the
videoproto: X.Org implementation of the X Window System), see their website:
videoproto:
videoproto: http://www.x.org
videoproto:
videoproto:
videoproto:

PACKAGE NAME:  viewres-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
viewres: viewres
viewres:
viewres: viewres is part of X11.
viewres:
viewres: For more information about the X.Org Foundation (the providers of the
viewres: X.Org implementation of the X Window System), see their website:
viewres:
viewres: http://www.x.org
viewres:
viewres:
viewres:

PACKAGE NAME:  x11-driver-7.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  197 K
PACKAGE SIZE (uncompressed):  590 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
x11-driver: x11-driver (input and output drivers for X)
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:
x11-driver:

PACKAGE NAME:  x11perf-1.5.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  65 K
PACKAGE SIZE (uncompressed):  230 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
x11perf: x11perf
x11perf:
x11perf: x11perf is part of X11.
x11perf:
x11perf: For more information about the X.Org Foundation (the providers of the
x11perf: X.Org implementation of the X Window System), see their website:
x11perf:
x11perf: http://www.x.org
x11perf:
x11perf:
x11perf:

PACKAGE NAME:  xauth-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xauth: xauth
xauth:
xauth: xauth is part of X11.
xauth:
xauth: For more information about the X.Org Foundation (the providers of the
xauth: X.Org implementation of the X Window System), see their website:
xauth:
xauth: http://www.x.org
xauth:
xauth:
xauth:

PACKAGE NAME:  xaw3d-1.5E-x86_64-1.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  162 K
PACKAGE SIZE (uncompressed):  790 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xaw3d: xaw3d (3D version of libXaw)
xaw3d:
xaw3d: Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena
xaw3d: Widget set.  The Three-D Athena may be used as a replacement for the
xaw3d: Athena (Xaw) Widget set -- you may relink almost any Athena Widget
xaw3d: based application and obtain a three dimensional appearance on some of
xaw3d: the widgets.  You can also replace your shared libXaw with libXaw3d
xaw3d: and obtain the three dimensional appearance without even relinking.
xaw3d:
xaw3d:
xaw3d:

PACKAGE NAME:  xbacklight-1.1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xbacklight: xbacklight
xbacklight:
xbacklight: xbacklight is part of X11.
xbacklight:
xbacklight: For more information about the X.Org Foundation (the providers of the
xbacklight: X.Org implementation of the X Window System), see their website:
xbacklight:
xbacklight: http://www.x.org
xbacklight:
xbacklight:
xbacklight:

PACKAGE NAME:  xbiff-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xbiff: xbiff
xbiff:
xbiff: xbiff is part of X11.
xbiff:
xbiff: For more information about the X.Org Foundation (the providers of the
xbiff: X.Org implementation of the X Window System), see their website:
xbiff:
xbiff: http://www.x.org
xbiff:
xbiff:
xbiff:

PACKAGE NAME:  xbitmaps-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xbitmaps: xbitmaps
xbitmaps:
xbitmaps: xbitmaps is part of X11.
xbitmaps:
xbitmaps: For more information about the X.Org Foundation (the providers of the
xbitmaps: X.Org implementation of the X Window System), see their website:
xbitmaps:
xbitmaps: http://www.x.org
xbitmaps:
xbitmaps:
xbitmaps:

PACKAGE NAME:  xcalc-1.0.4.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcalc: xcalc
xcalc:
xcalc: xcalc is part of X11.
xcalc:
xcalc: For more information about the X.Org Foundation (the providers of the
xcalc: X.Org implementation of the X Window System), see their website:
xcalc:
xcalc: http://www.x.org
xcalc:
xcalc:
xcalc:

PACKAGE NAME:  xcb-proto-1.6-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  50 K
PACKAGE SIZE (uncompressed):  470 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcb-proto: xcb-proto
xcb-proto:
xcb-proto: xcb-proto is part of X11.
xcb-proto:
xcb-proto: For more information about the X.Org Foundation (the providers of the
xcb-proto: X.Org implementation of the X Window System), see their website:
xcb-proto:
xcb-proto: http://www.x.org
xcb-proto:
xcb-proto:
xcb-proto:

PACKAGE NAME:  xcb-util-0.3.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  44 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcb-util: xcb-util
xcb-util:
xcb-util: xcb-util is part of X11.
xcb-util:
xcb-util: For more information about the X.Org Foundation (the providers of the
xcb-util: X.Org implementation of the X Window System), see their website:
xcb-util:
xcb-util: http://www.x.org
xcb-util:
xcb-util:
xcb-util:

PACKAGE NAME:  xclipboard-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xclipboard: xclipboard
xclipboard:
xclipboard: xclipboard is part of X11.
xclipboard:
xclipboard: For more information about the X.Org Foundation (the providers of the
xclipboard: X.Org implementation of the X Window System), see their website:
xclipboard:
xclipboard: http://www.x.org
xclipboard:
xclipboard:
xclipboard:

PACKAGE NAME:  xclock-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  32 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xclock: xclock
xclock:
xclock: xclock is part of X11.
xclock:
xclock: For more information about the X.Org Foundation (the providers of the
xclock: X.Org implementation of the X Window System), see their website:
xclock:
xclock: http://www.x.org
xclock:
xclock:
xclock:

PACKAGE NAME:  xcmiscproto-1.2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcmiscproto: xcmiscproto
xcmiscproto:
xcmiscproto: xcmiscproto is part of X11.
xcmiscproto:
xcmiscproto: For more information about the X.Org Foundation (the providers of the
xcmiscproto: X.Org implementation of the X Window System), see their website:
xcmiscproto:
xcmiscproto: http://www.x.org
xcmiscproto:
xcmiscproto:
xcmiscproto:

PACKAGE NAME:  xcmsdb-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcmsdb: xcmsdb
xcmsdb:
xcmsdb: xcmsdb is part of X11.
xcmsdb:
xcmsdb: For more information about the X.Org Foundation (the providers of the
xcmsdb: X.Org implementation of the X Window System), see their website:
xcmsdb:
xcmsdb: http://www.x.org
xcmsdb:
xcmsdb:
xcmsdb:

PACKAGE NAME:  xcompmgr-1.1.5-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  21 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcompmgr: xcompmgr
xcompmgr:
xcompmgr: xcompmgr is part of X11.
xcompmgr:
xcompmgr: For more information about the X.Org Foundation (the providers of the
xcompmgr: X.Org implementation of the X Window System), see their website:
xcompmgr:
xcompmgr: http://www.x.org
xcompmgr:
xcompmgr:
xcompmgr:

PACKAGE NAME:  xconsole-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xconsole: xconsole
xconsole:
xconsole: xconsole is part of X11.
xconsole:
xconsole: For more information about the X.Org Foundation (the providers of the
xconsole: X.Org implementation of the X Window System), see their website:
xconsole:
xconsole: http://www.x.org
xconsole:
xconsole:
xconsole:

PACKAGE NAME:  xcursor-themes-1.0.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  312 K
PACKAGE SIZE (uncompressed):  3700 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcursor-themes: xcursor-themes
xcursor-themes:
xcursor-themes: xcursor-themes is part of X11.
xcursor-themes:
xcursor-themes: For more information about the X.Org Foundation (the providers of the
xcursor-themes: X.Org implementation of the X Window System), see their website:
xcursor-themes:
xcursor-themes: http://www.x.org
xcursor-themes:
xcursor-themes:
xcursor-themes:

PACKAGE NAME:  xcursorgen-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcursorgen: xcursorgen
xcursorgen:
xcursorgen: xcursorgen is part of X11.
xcursorgen:
xcursorgen: For more information about the X.Org Foundation (the providers of the
xcursorgen: X.Org implementation of the X Window System), see their website:
xcursorgen:
xcursorgen: http://www.x.org
xcursorgen:
xcursorgen:
xcursorgen:

PACKAGE NAME:  xdbedizzy-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdbedizzy: xdbedizzy
xdbedizzy:
xdbedizzy: xdbedizzy is part of X11.
xdbedizzy:
xdbedizzy: For more information about the X.Org Foundation (the providers of the
xdbedizzy: X.Org implementation of the X Window System), see their website:
xdbedizzy:
xdbedizzy: http://www.x.org
xdbedizzy:
xdbedizzy:
xdbedizzy:

PACKAGE NAME:  xdg-utils-1.1.0_rc1-noarch-1.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  52 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdg-utils: xdg-utils (command line tools that assist applications)
xdg-utils: 
xdg-utils: Xdg-utils is a set of command line tools that assist applications
xdg-utils: with a variety of desktop integration tasks.  About half of the
xdg-utils: tools focus on tasks commonly required during the installation of
xdg-utils: a desktop application and the other half focuses on integration
xdg-utils: with the desktop environment while the application is running.
xdg-utils:
xdg-utils: Homepage:  http://portland.freedesktop.org/wiki/
xdg-utils:
xdg-utils:

PACKAGE NAME:  xditview-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xditview: xditview
xditview:
xditview: xditview is part of X11.
xditview:
xditview: For more information about the X.Org Foundation (the providers of the
xditview: X.Org implementation of the X Window System), see their website:
xditview:
xditview: http://www.x.org
xditview:
xditview:
xditview:

PACKAGE NAME:  xdm-1.1.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  115 K
PACKAGE SIZE (uncompressed):  390 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdm: xdm
xdm:
xdm: xdm is part of X11.
xdm:
xdm: For more information about the X.Org Foundation (the providers of the
xdm: X.Org implementation of the X Window System), see their website:
xdm:
xdm: http://www.x.org
xdm:
xdm:
xdm:

PACKAGE NAME:  xdpyinfo-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  27 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdpyinfo: xdpyinfo
xdpyinfo:
xdpyinfo: xdpyinfo is part of X11.
xdpyinfo:
xdpyinfo: For more information about the X.Org Foundation (the providers of the
xdpyinfo: X.Org implementation of the X Window System), see their website:
xdpyinfo:
xdpyinfo: http://www.x.org
xdpyinfo:
xdpyinfo:
xdpyinfo:

PACKAGE NAME:  xdriinfo-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdriinfo: xdriinfo
xdriinfo:
xdriinfo: xdriinfo is part of X11.
xdriinfo:
xdriinfo: For more information about the X.Org Foundation (the providers of the
xdriinfo: X.Org implementation of the X Window System), see their website:
xdriinfo:
xdriinfo: http://www.x.org
xdriinfo:
xdriinfo:
xdriinfo:

PACKAGE NAME:  xedit-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  306 K
PACKAGE SIZE (uncompressed):  990 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xedit: xedit
xedit:
xedit: xedit is part of X11.
xedit:
xedit: For more information about the X.Org Foundation (the providers of the
xedit: X.Org implementation of the X Window System), see their website:
xedit:
xedit: http://www.x.org
xedit:
xedit:
xedit:

PACKAGE NAME:  xev-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xev: xev
xev:
xev: xev is part of X11.
xev:
xev: For more information about the X.Org Foundation (the providers of the
xev: X.Org implementation of the X Window System), see their website:
xev:
xev: http://www.x.org
xev:
xev:
xev:

PACKAGE NAME:  xextproto-7.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  137 K
PACKAGE SIZE (uncompressed):  1280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xextproto: xextproto
xextproto:
xextproto: xextproto is part of X11.
xextproto:
xextproto: For more information about the X.Org Foundation (the providers of the
xextproto: X.Org implementation of the X Window System), see their website:
xextproto:
xextproto: http://www.x.org
xextproto:
xextproto:
xextproto:

PACKAGE NAME:  xeyes-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xeyes: xeyes
xeyes:
xeyes: xeyes is part of X11.
xeyes:
xeyes: For more information about the X.Org Foundation (the providers of the
xeyes: X.Org implementation of the X Window System), see their website:
xeyes:
xeyes: http://www.x.org
xeyes:
xeyes:
xeyes:

PACKAGE NAME:  xf86-input-acecad-1.4.0-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-acecad: xf86-input-acecad
xf86-input-acecad:
xf86-input-acecad: xf86-input-acecad is part of X11.
xf86-input-acecad:
xf86-input-acecad: For more information about the X.Org Foundation (the providers of the
xf86-input-acecad: X.Org implementation of the X Window System), see their website:
xf86-input-acecad:
xf86-input-acecad: http://www.x.org
xf86-input-acecad:
xf86-input-acecad:
xf86-input-acecad:

PACKAGE NAME:  xf86-input-aiptek-1.3.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-aiptek: xf86-input-aiptek
xf86-input-aiptek:
xf86-input-aiptek: xf86-input-aiptek is part of X11.
xf86-input-aiptek:
xf86-input-aiptek: For more information about the X.Org Foundation (the providers of the
xf86-input-aiptek: X.Org implementation of the X Window System), see their website:
xf86-input-aiptek:
xf86-input-aiptek: http://www.x.org
xf86-input-aiptek:
xf86-input-aiptek:
xf86-input-aiptek:

PACKAGE NAME:  xf86-input-evdev-2.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-evdev: xf86-input-evdev
xf86-input-evdev:
xf86-input-evdev: xf86-input-evdev is part of X11.
xf86-input-evdev:
xf86-input-evdev: For more information about the X.Org Foundation (the providers of the
xf86-input-evdev: X.Org implementation of the X Window System), see their website:
xf86-input-evdev:
xf86-input-evdev: http://www.x.org
xf86-input-evdev:
xf86-input-evdev:
xf86-input-evdev:

PACKAGE NAME:  xf86-input-joystick-1.5.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  32 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-joystick: xf86-input-joystick
xf86-input-joystick:
xf86-input-joystick: xf86-input-joystick is part of X11.
xf86-input-joystick:
xf86-input-joystick: For more information about the X.Org Foundation (the providers of the
xf86-input-joystick: X.Org implementation of the X Window System), see their website:
xf86-input-joystick:
xf86-input-joystick: http://www.x.org
xf86-input-joystick:
xf86-input-joystick:
xf86-input-joystick:

PACKAGE NAME:  xf86-input-keyboard-1.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-keyboard: xf86-input-keyboard
xf86-input-keyboard:
xf86-input-keyboard: xf86-input-keyboard is part of X11.
xf86-input-keyboard:
xf86-input-keyboard: For more information about the X.Org Foundation (the providers of the
xf86-input-keyboard: X.Org implementation of the X Window System), see their website:
xf86-input-keyboard:
xf86-input-keyboard: http://www.x.org
xf86-input-keyboard:
xf86-input-keyboard:
xf86-input-keyboard:

PACKAGE NAME:  xf86-input-mouse-1.7.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  45 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-mouse: xf86-input-mouse
xf86-input-mouse:
xf86-input-mouse: xf86-input-mouse is part of X11.
xf86-input-mouse:
xf86-input-mouse: For more information about the X.Org Foundation (the providers of the
xf86-input-mouse: X.Org implementation of the X Window System), see their website:
xf86-input-mouse:
xf86-input-mouse: http://www.x.org
xf86-input-mouse:
xf86-input-mouse:
xf86-input-mouse:

PACKAGE NAME:  xf86-input-penmount-1.4.1-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-penmount: xf86-input-penmount
xf86-input-penmount:
xf86-input-penmount: xf86-input-penmount is part of X11.
xf86-input-penmount:
xf86-input-penmount: For more information about the X.Org Foundation (the providers of the
xf86-input-penmount: X.Org implementation of the X Window System), see their website:
xf86-input-penmount:
xf86-input-penmount: http://www.x.org
xf86-input-penmount:
xf86-input-penmount:
xf86-input-penmount:

PACKAGE NAME:  xf86-input-synaptics-1.4.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  61 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-synaptics: xf86-input-synaptics
xf86-input-synaptics:
xf86-input-synaptics: xf86-input-synaptics is part of X11.
xf86-input-synaptics:
xf86-input-synaptics: For more information about the X.Org Foundation (the providers of the
xf86-input-synaptics: X.Org implementation of the X Window System), see their website:
xf86-input-synaptics:
xf86-input-synaptics: http://www.x.org
xf86-input-synaptics:
xf86-input-synaptics:
xf86-input-synaptics:

PACKAGE NAME:  xf86-input-vmmouse-12.7.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-vmmouse: xf86-input-vmmouse
xf86-input-vmmouse:
xf86-input-vmmouse: xf86-input-vmmouse is part of X11.
xf86-input-vmmouse:
xf86-input-vmmouse: For more information about the X.Org Foundation (the providers of the
xf86-input-vmmouse: X.Org implementation of the X Window System), see their website:
xf86-input-vmmouse:
xf86-input-vmmouse: http://www.x.org
xf86-input-vmmouse:
xf86-input-vmmouse:
xf86-input-vmmouse:

PACKAGE NAME:  xf86-input-void-1.3.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-void: xf86-input-void
xf86-input-void:
xf86-input-void: xf86-input-void is part of X11.
xf86-input-void:
xf86-input-void: For more information about the X.Org Foundation (the providers of the
xf86-input-void: X.Org implementation of the X Window System), see their website:
xf86-input-void:
xf86-input-void: http://www.x.org
xf86-input-void:
xf86-input-void:
xf86-input-void:

PACKAGE NAME:  xf86-input-wacom-0.10.11-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  79 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-input-wacom: xf86-input-wacom
xf86-input-wacom:
xf86-input-wacom: xf86-input-wacom is part of X11.
xf86-input-wacom:
xf86-input-wacom: For more information about the X.Org Foundation (the providers of the
xf86-input-wacom: X.Org implementation of the X Window System), see their website:
xf86-input-wacom:
xf86-input-wacom: http://www.x.org
xf86-input-wacom:
xf86-input-wacom:
xf86-input-wacom:

PACKAGE NAME:  xf86-video-apm-1.2.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  64 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-apm: xf86-video-apm
xf86-video-apm:
xf86-video-apm: xf86-video-apm is part of X11.
xf86-video-apm:
xf86-video-apm: For more information about the X.Org Foundation (the providers of the
xf86-video-apm: X.Org implementation of the X Window System), see their website:
xf86-video-apm:
xf86-video-apm: http://www.x.org
xf86-video-apm:
xf86-video-apm:
xf86-video-apm:

PACKAGE NAME:  xf86-video-ark-0.7.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-ark: xf86-video-ark
xf86-video-ark:
xf86-video-ark: xf86-video-ark is part of X11.
xf86-video-ark:
xf86-video-ark: For more information about the X.Org Foundation (the providers of the
xf86-video-ark: X.Org implementation of the X Window System), see their website:
xf86-video-ark:
xf86-video-ark: http://www.x.org
xf86-video-ark:
xf86-video-ark:
xf86-video-ark:

PACKAGE NAME:  xf86-video-ast-0.91.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-ast: xf86-video-ast
xf86-video-ast:
xf86-video-ast: xf86-video-ast is part of X11.
xf86-video-ast:
xf86-video-ast: For more information about the X.Org Foundation (the providers of the
xf86-video-ast: X.Org implementation of the X Window System), see their website:
xf86-video-ast:
xf86-video-ast: http://www.x.org
xf86-video-ast:
xf86-video-ast:
xf86-video-ast:

PACKAGE NAME:  xf86-video-ati-6.14.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  351 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-ati: xf86-video-ati
xf86-video-ati:
xf86-video-ati: xf86-video-ati is part of X11.
xf86-video-ati:
xf86-video-ati: For more information about the X.Org Foundation (the providers of the
xf86-video-ati: X.Org implementation of the X Window System), see their website:
xf86-video-ati:
xf86-video-ati: http://www.x.org
xf86-video-ati:
xf86-video-ati:
xf86-video-ati:

PACKAGE NAME:  xf86-video-chips-1.2.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  87 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-chips: xf86-video-chips
xf86-video-chips:
xf86-video-chips: xf86-video-chips is part of X11.
xf86-video-chips:
xf86-video-chips: For more information about the X.Org Foundation (the providers of the
xf86-video-chips: X.Org implementation of the X Window System), see their website:
xf86-video-chips:
xf86-video-chips: http://www.x.org
xf86-video-chips:
xf86-video-chips:
xf86-video-chips:

PACKAGE NAME:  xf86-video-cirrus-1.3.2-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  35 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-cirrus: xf86-video-cirrus
xf86-video-cirrus:
xf86-video-cirrus: xf86-video-cirrus is part of X11.
xf86-video-cirrus:
xf86-video-cirrus: For more information about the X.Org Foundation (the providers of the
xf86-video-cirrus: X.Org implementation of the X Window System), see their website:
xf86-video-cirrus:
xf86-video-cirrus: http://www.x.org
xf86-video-cirrus:
xf86-video-cirrus:
xf86-video-cirrus:

PACKAGE NAME:  xf86-video-dummy-0.3.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  12 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-dummy: xf86-video-dummy
xf86-video-dummy:
xf86-video-dummy: xf86-video-dummy is part of X11.
xf86-video-dummy:
xf86-video-dummy: For more information about the X.Org Foundation (the providers of the
xf86-video-dummy: X.Org implementation of the X Window System), see their website:
xf86-video-dummy:
xf86-video-dummy: http://www.x.org
xf86-video-dummy:
xf86-video-dummy:
xf86-video-dummy:

PACKAGE NAME:  xf86-video-glint-1.2.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  91 K
PACKAGE SIZE (uncompressed):  340 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-glint: xf86-video-glint
xf86-video-glint:
xf86-video-glint: xf86-video-glint is part of X11.
xf86-video-glint:
xf86-video-glint: For more information about the X.Org Foundation (the providers of the
xf86-video-glint: X.Org implementation of the X Window System), see their website:
xf86-video-glint:
xf86-video-glint: http://www.x.org
xf86-video-glint:
xf86-video-glint:
xf86-video-glint:

PACKAGE NAME:  xf86-video-i128-1.3.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-i128: xf86-video-i128
xf86-video-i128:
xf86-video-i128: xf86-video-i128 is part of X11.
xf86-video-i128:
xf86-video-i128: For more information about the X.Org Foundation (the providers of the
xf86-video-i128: X.Org implementation of the X Window System), see their website:
xf86-video-i128:
xf86-video-i128: http://www.x.org
xf86-video-i128:
xf86-video-i128:
xf86-video-i128:

PACKAGE NAME:  xf86-video-i740-1.3.2-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-i740: xf86-video-i740
xf86-video-i740:
xf86-video-i740: xf86-video-i740 is part of X11.
xf86-video-i740:
xf86-video-i740: For more information about the X.Org Foundation (the providers of the
xf86-video-i740: X.Org implementation of the X Window System), see their website:
xf86-video-i740:
xf86-video-i740: http://www.x.org
xf86-video-i740:
xf86-video-i740:
xf86-video-i740:

PACKAGE NAME:  xf86-video-intel-2.15.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  191 K
PACKAGE SIZE (uncompressed):  890 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-intel: xf86-video-intel
xf86-video-intel:
xf86-video-intel: xf86-video-intel is part of X11.
xf86-video-intel:
xf86-video-intel: For more information about the X.Org Foundation (the providers of the
xf86-video-intel: X.Org implementation of the X Window System), see their website:
xf86-video-intel:
xf86-video-intel: http://www.x.org
xf86-video-intel:
xf86-video-intel:
xf86-video-intel:

PACKAGE NAME:  xf86-video-mach64-6.8.2-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-mach64: xf86-video-mach64
xf86-video-mach64:
xf86-video-mach64: xf86-video-mach64 is part of X11.
xf86-video-mach64:
xf86-video-mach64: For more information about the X.Org Foundation (the providers of the
xf86-video-mach64: X.Org implementation of the X Window System), see their website:
xf86-video-mach64:
xf86-video-mach64: http://www.x.org
xf86-video-mach64:
xf86-video-mach64:
xf86-video-mach64:

PACKAGE NAME:  xf86-video-mga-1.4.13-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  90 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-mga: xf86-video-mga
xf86-video-mga:
xf86-video-mga: xf86-video-mga is part of X11.
xf86-video-mga:
xf86-video-mga: For more information about the X.Org Foundation (the providers of the
xf86-video-mga: X.Org implementation of the X Window System), see their website:
xf86-video-mga:
xf86-video-mga: http://www.x.org
xf86-video-mga:
xf86-video-mga:
xf86-video-mga:

PACKAGE NAME:  xf86-video-neomagic-1.2.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  39 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-neomagic: xf86-video-neomagic
xf86-video-neomagic:
xf86-video-neomagic: xf86-video-neomagic is part of X11.
xf86-video-neomagic:
xf86-video-neomagic: For more information about the X.Org Foundation (the providers of the
xf86-video-neomagic: X.Org implementation of the X Window System), see their website:
xf86-video-neomagic:
xf86-video-neomagic: http://www.x.org
xf86-video-neomagic:
xf86-video-neomagic:
xf86-video-neomagic:

PACKAGE NAME:  xf86-video-nouveau-8bb82312-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  71 K
PACKAGE SIZE (uncompressed):  220 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-nouveau: xf86-video-nouveau
xf86-video-nouveau:
xf86-video-nouveau: xf86-video-nouveau is part of X11.
xf86-video-nouveau:
xf86-video-nouveau: For more information about the X.Org Foundation (the providers of the
xf86-video-nouveau: X.Org implementation of the X Window System), see their website:
xf86-video-nouveau:
xf86-video-nouveau: http://www.x.org
xf86-video-nouveau:
xf86-video-nouveau:
xf86-video-nouveau:

PACKAGE NAME:  xf86-video-nv-2.1.18-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  86 K
PACKAGE SIZE (uncompressed):  260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-nv: xf86-video-nv
xf86-video-nv:
xf86-video-nv: xf86-video-nv is part of X11.
xf86-video-nv:
xf86-video-nv: For more information about the X.Org Foundation (the providers of the
xf86-video-nv: X.Org implementation of the X Window System), see their website:
xf86-video-nv:
xf86-video-nv: http://www.x.org
xf86-video-nv:
xf86-video-nv:
xf86-video-nv:

PACKAGE NAME:  xf86-video-openchrome-0.2.904-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  137 K
PACKAGE SIZE (uncompressed):  520 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-openchrome: xf86-video-openchrome
xf86-video-openchrome:
xf86-video-openchrome: xf86-video-openchrome is part of X11.
xf86-video-openchrome:
xf86-video-openchrome: For more information about the X.Org Foundation (the providers of the
xf86-video-openchrome: X.Org implementation of the X Window System), see their website:
xf86-video-openchrome:
xf86-video-openchrome: http://www.x.org
xf86-video-openchrome:
xf86-video-openchrome:
xf86-video-openchrome:

PACKAGE NAME:  xf86-video-r128-6.8.1-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  55 K
PACKAGE SIZE (uncompressed):  170 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-r128: xf86-video-r128
xf86-video-r128:
xf86-video-r128: xf86-video-r128 is part of X11.
xf86-video-r128:
xf86-video-r128: For more information about the X.Org Foundation (the providers of the
xf86-video-r128: X.Org implementation of the X Window System), see their website:
xf86-video-r128:
xf86-video-r128: http://www.x.org
xf86-video-r128:
xf86-video-r128:
xf86-video-r128:

PACKAGE NAME:  xf86-video-radeonhd-1.3.0-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  197 K
PACKAGE SIZE (uncompressed):  590 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-radeonhd: xf86-video-radeonhd (driver for AMD GPG (ATI) R5xx/R6xx chipsets)
xf86-video-radeonhd:
xf86-video-radeonhd: xf86-video-radeonhd is part of X11.
xf86-video-radeonhd:
xf86-video-radeonhd: For more information about the X.Org Foundation (the providers of the
xf86-video-radeonhd: X.Org implementation of the X Window System), see their website:
xf86-video-radeonhd:
xf86-video-radeonhd: http://www.x.org
xf86-video-radeonhd:
xf86-video-radeonhd:
xf86-video-radeonhd:

PACKAGE NAME:  xf86-video-rendition-4.2.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  43 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-rendition: xf86-video-rendition
xf86-video-rendition:
xf86-video-rendition: xf86-video-rendition is part of X11.
xf86-video-rendition:
xf86-video-rendition: For more information about the X.Org Foundation (the providers of the
xf86-video-rendition: X.Org implementation of the X Window System), see their website:
xf86-video-rendition:
xf86-video-rendition: http://www.x.org
xf86-video-rendition:
xf86-video-rendition:
xf86-video-rendition:

PACKAGE NAME:  xf86-video-s3-0.6.3-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-s3: xf86-video-s3
xf86-video-s3:
xf86-video-s3: xf86-video-s3 is part of X11.
xf86-video-s3:
xf86-video-s3: For more information about the X.Org Foundation (the providers of the
xf86-video-s3: X.Org implementation of the X Window System), see their website:
xf86-video-s3:
xf86-video-s3: http://www.x.org
xf86-video-s3:
xf86-video-s3:
xf86-video-s3:

PACKAGE NAME:  xf86-video-s3virge-1.10.4-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  41 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-s3virge: xf86-video-s3virge
xf86-video-s3virge:
xf86-video-s3virge: xf86-video-s3virge is part of X11.
xf86-video-s3virge:
xf86-video-s3virge: For more information about the X.Org Foundation (the providers of the
xf86-video-s3virge: X.Org implementation of the X Window System), see their website:
xf86-video-s3virge:
xf86-video-s3virge: http://www.x.org
xf86-video-s3virge:
xf86-video-s3virge:
xf86-video-s3virge:

PACKAGE NAME:  xf86-video-savage-2.3.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  72 K
PACKAGE SIZE (uncompressed):  210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-savage: xf86-video-savage
xf86-video-savage:
xf86-video-savage: xf86-video-savage is part of X11.
xf86-video-savage:
xf86-video-savage: For more information about the X.Org Foundation (the providers of the
xf86-video-savage: X.Org implementation of the X Window System), see their website:
xf86-video-savage:
xf86-video-savage: http://www.x.org
xf86-video-savage:
xf86-video-savage:
xf86-video-savage:

PACKAGE NAME:  xf86-video-siliconmotion-1.7.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  64 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-siliconmotion: xf86-video-siliconmotion
xf86-video-siliconmotion:
xf86-video-siliconmotion: xf86-video-siliconmotion is part of X11.
xf86-video-siliconmotion:
xf86-video-siliconmotion: For more information about the X.Org Foundation (the providers of the
xf86-video-siliconmotion: X.Org implementation of the X Window System), see their website:
xf86-video-siliconmotion:
xf86-video-siliconmotion: http://www.x.org
xf86-video-siliconmotion:
xf86-video-siliconmotion:
xf86-video-siliconmotion:

PACKAGE NAME:  xf86-video-sis-0.10.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  243 K
PACKAGE SIZE (uncompressed):  650 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-sis: xf86-video-sis
xf86-video-sis:
xf86-video-sis: xf86-video-sis is part of X11.
xf86-video-sis:
xf86-video-sis: For more information about the X.Org Foundation (the providers of the
xf86-video-sis: X.Org implementation of the X Window System), see their website:
xf86-video-sis:
xf86-video-sis: http://www.x.org
xf86-video-sis:
xf86-video-sis:
xf86-video-sis:

PACKAGE NAME:  xf86-video-sisusb-0.9.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  45 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-sisusb: xf86-video-sisusb
xf86-video-sisusb:
xf86-video-sisusb: xf86-video-sisusb is part of X11.
xf86-video-sisusb:
xf86-video-sisusb: For more information about the X.Org Foundation (the providers of the
xf86-video-sisusb: X.Org implementation of the X Window System), see their website:
xf86-video-sisusb:
xf86-video-sisusb: http://www.x.org
xf86-video-sisusb:
xf86-video-sisusb:
xf86-video-sisusb:

PACKAGE NAME:  xf86-video-tdfx-1.4.3-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-tdfx: xf86-video-tdfx
xf86-video-tdfx:
xf86-video-tdfx: xf86-video-tdfx is part of X11.
xf86-video-tdfx:
xf86-video-tdfx: For more information about the X.Org Foundation (the providers of the
xf86-video-tdfx: X.Org implementation of the X Window System), see their website:
xf86-video-tdfx:
xf86-video-tdfx: http://www.x.org
xf86-video-tdfx:
xf86-video-tdfx:
xf86-video-tdfx:

PACKAGE NAME:  xf86-video-tga-1.2.1-x86_64-2.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  23 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-tga: xf86-video-tga
xf86-video-tga:
xf86-video-tga: xf86-video-tga is part of X11.
xf86-video-tga:
xf86-video-tga: For more information about the X.Org Foundation (the providers of the
xf86-video-tga: X.Org implementation of the X Window System), see their website:
xf86-video-tga:
xf86-video-tga: http://www.x.org
xf86-video-tga:
xf86-video-tga:
xf86-video-tga:

PACKAGE NAME:  xf86-video-trident-1.3.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  67 K
PACKAGE SIZE (uncompressed):  210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-trident: xf86-video-trident
xf86-video-trident:
xf86-video-trident: xf86-video-trident is part of X11.
xf86-video-trident:
xf86-video-trident: For more information about the X.Org Foundation (the providers of the
xf86-video-trident: X.Org implementation of the X Window System), see their website:
xf86-video-trident:
xf86-video-trident: http://www.x.org
xf86-video-trident:
xf86-video-trident:
xf86-video-trident:

PACKAGE NAME:  xf86-video-tseng-1.2.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-tseng: xf86-video-tseng
xf86-video-tseng:
xf86-video-tseng: xf86-video-tseng is part of X11.
xf86-video-tseng:
xf86-video-tseng: For more information about the X.Org Foundation (the providers of the
xf86-video-tseng: X.Org implementation of the X Window System), see their website:
xf86-video-tseng:
xf86-video-tseng: http://www.x.org
xf86-video-tseng:
xf86-video-tseng:
xf86-video-tseng:

PACKAGE NAME:  xf86-video-v4l-0.2.0-x86_64-4.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  9 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-v4l: xf86-video-v4l
xf86-video-v4l:
xf86-video-v4l: xf86-video-v4l is part of X11.
xf86-video-v4l:
xf86-video-v4l: For more information about the X.Org Foundation (the providers of the
xf86-video-v4l: X.Org implementation of the X Window System), see their website:
xf86-video-v4l:
xf86-video-v4l: http://www.x.org
xf86-video-v4l:
xf86-video-v4l:
xf86-video-v4l:

PACKAGE NAME:  xf86-video-vesa-2.3.0-x86_64-3.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-vesa: xf86-video-vesa
xf86-video-vesa:
xf86-video-vesa: xf86-video-vesa is part of X11.
xf86-video-vesa:
xf86-video-vesa: For more information about the X.Org Foundation (the providers of the
xf86-video-vesa: X.Org implementation of the X Window System), see their website:
xf86-video-vesa:
xf86-video-vesa: http://www.x.org
xf86-video-vesa:
xf86-video-vesa:
xf86-video-vesa:

PACKAGE NAME:  xf86-video-vmware-11.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  38 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-vmware: xf86-video-vmware
xf86-video-vmware:
xf86-video-vmware: xf86-video-vmware is part of X11.
xf86-video-vmware:
xf86-video-vmware: For more information about the X.Org Foundation (the providers of the
xf86-video-vmware: X.Org implementation of the X Window System), see their website:
xf86-video-vmware:
xf86-video-vmware: http://www.x.org
xf86-video-vmware:
xf86-video-vmware:
xf86-video-vmware:

PACKAGE NAME:  xf86-video-voodoo-1.2.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-voodoo: xf86-video-voodoo
xf86-video-voodoo:
xf86-video-voodoo: xf86-video-voodoo is part of X11.
xf86-video-voodoo:
xf86-video-voodoo: For more information about the X.Org Foundation (the providers of the
xf86-video-voodoo: X.Org implementation of the X Window System), see their website:
xf86-video-voodoo:
xf86-video-voodoo: http://www.x.org
xf86-video-voodoo:
xf86-video-voodoo:
xf86-video-voodoo:

PACKAGE NAME:  xf86-video-xgi-1.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  121 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86-video-xgi: xf86-video-xgi
xf86-video-xgi:
xf86-video-xgi: xf86-video-xgi is part of X11.
xf86-video-xgi:
xf86-video-xgi: For more information about the X.Org Foundation (the providers of the
xf86-video-xgi: X.Org implementation of the X Window System), see their website:
xf86-video-xgi:
xf86-video-xgi: http://www.x.org
xf86-video-xgi:
xf86-video-xgi:
xf86-video-xgi:

PACKAGE NAME:  xf86bigfontproto-1.2.0-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  4 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86bigfontproto: xf86bigfontproto
xf86bigfontproto:
xf86bigfontproto: xf86bigfontproto is part of X11.
xf86bigfontproto:
xf86bigfontproto: For more information about the X.Org Foundation (the providers of the
xf86bigfontproto: X.Org implementation of the X Window System), see their website:
xf86bigfontproto:
xf86bigfontproto: http://www.x.org
xf86bigfontproto:
xf86bigfontproto:
xf86bigfontproto:

PACKAGE NAME:  xf86dga-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86dga: xf86dga
xf86dga:
xf86dga: xf86dga is part of X11.
xf86dga:
xf86dga: For more information about the X.Org Foundation (the providers of the
xf86dga: X.Org implementation of the X Window System), see their website:
xf86dga:
xf86dga: http://www.x.org
xf86dga:
xf86dga:
xf86dga:

PACKAGE NAME:  xf86dgaproto-2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  7 K
PACKAGE SIZE (uncompressed):  40 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86dgaproto: xf86dgaproto
xf86dgaproto:
xf86dgaproto: xf86dgaproto is part of X11.
xf86dgaproto:
xf86dgaproto: For more information about the X.Org Foundation (the providers of the
xf86dgaproto: X.Org implementation of the X Window System), see their website:
xf86dgaproto:
xf86dgaproto: http://www.x.org
xf86dgaproto:
xf86dgaproto:
xf86dgaproto:

PACKAGE NAME:  xf86driproto-2.1.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86driproto: xf86driproto
xf86driproto:
xf86driproto: xf86driproto is part of X11.
xf86driproto:
xf86driproto: For more information about the X.Org Foundation (the providers of the
xf86driproto: X.Org implementation of the X Window System), see their website:
xf86driproto:
xf86driproto: http://www.x.org
xf86driproto:
xf86driproto:
xf86driproto:

PACKAGE NAME:  xf86miscproto-0.9.3-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  6 K
PACKAGE SIZE (uncompressed):  30 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86miscproto: xf86miscproto
xf86miscproto:
xf86miscproto: xf86miscproto is part of X11.
xf86miscproto:
xf86miscproto: For more information about the X.Org Foundation (the providers of the
xf86miscproto: X.Org implementation of the X Window System), see their website:
xf86miscproto:
xf86miscproto: http://www.x.org
xf86miscproto:
xf86miscproto:
xf86miscproto:

PACKAGE NAME:  xf86vidmodeproto-2.3.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  11 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xf86vidmodeproto: xf86vidmodeproto
xf86vidmodeproto:
xf86vidmodeproto: xf86vidmodeproto is part of X11.
xf86vidmodeproto:
xf86vidmodeproto: For more information about the X.Org Foundation (the providers of the
xf86vidmodeproto: X.Org implementation of the X Window System), see their website:
xf86vidmodeproto:
xf86vidmodeproto: http://www.x.org
xf86vidmodeproto:
xf86vidmodeproto:
xf86vidmodeproto:

PACKAGE NAME:  xfd-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfd: xfd
xfd:
xfd: xfd is part of X11.
xfd:
xfd: For more information about the X.Org Foundation (the providers of the
xfd: X.Org implementation of the X Window System), see their website:
xfd:
xfd: http://www.x.org
xfd:
xfd:
xfd:

PACKAGE NAME:  xfontsel-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfontsel: xfontsel
xfontsel:
xfontsel: xfontsel is part of X11.
xfontsel:
xfontsel: For more information about the X.Org Foundation (the providers of the
xfontsel: X.Org implementation of the X Window System), see their website:
xfontsel:
xfontsel: http://www.x.org
xfontsel:
xfontsel:
xfontsel:

PACKAGE NAME:  xfs-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  72 K
PACKAGE SIZE (uncompressed):  200 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfs: xfs
xfs:
xfs: xfs is part of X11.
xfs:
xfs: For more information about the X.Org Foundation (the providers of the
xfs: X.Org implementation of the X Window System), see their website:
xfs:
xfs: http://www.x.org
xfs:
xfs:
xfs:

PACKAGE NAME:  xfsinfo-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfsinfo: xfsinfo
xfsinfo:
xfsinfo: xfsinfo is part of X11.
xfsinfo:
xfsinfo: For more information about the X.Org Foundation (the providers of the
xfsinfo: X.Org implementation of the X Window System), see their website:
xfsinfo:
xfsinfo: http://www.x.org
xfsinfo:
xfsinfo:
xfsinfo:

PACKAGE NAME:  xgamma-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xgamma: xgamma
xgamma:
xgamma: xgamma is part of X11.
xgamma:
xgamma: For more information about the X.Org Foundation (the providers of the
xgamma: X.Org implementation of the X Window System), see their website:
xgamma:
xgamma: http://www.x.org
xgamma:
xgamma:
xgamma:

PACKAGE NAME:  xgc-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  37 K
PACKAGE SIZE (uncompressed):  120 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xgc: xgc
xgc:
xgc: xgc is part of X11.
xgc:
xgc: For more information about the X.Org Foundation (the providers of the
xgc: X.Org implementation of the X Window System), see their website:
xgc:
xgc: http://www.x.org
xgc:
xgc:
xgc:

PACKAGE NAME:  xhost-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xhost: xhost
xhost:
xhost: xhost is part of X11.
xhost:
xhost: For more information about the X.Org Foundation (the providers of the
xhost: X.Org implementation of the X Window System), see their website:
xhost:
xhost: http://www.x.org
xhost:
xhost:
xhost:

PACKAGE NAME:  xineramaproto-1.2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  10 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xineramaproto: xineramaproto
xineramaproto:
xineramaproto: xineramaproto is part of X11.
xineramaproto:
xineramaproto: For more information about the X.Org Foundation (the providers of the
xineramaproto: X.Org implementation of the X Window System), see their website:
xineramaproto:
xineramaproto: http://www.x.org
xineramaproto:
xineramaproto:
xineramaproto:

PACKAGE NAME:  xinit-1.3.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  28 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xinit: xinit
xinit:
xinit: xinit is part of X11.
xinit:
xinit: For more information about the X.Org Foundation (the providers of the
xinit: X.Org implementation of the X Window System), see their website:
xinit:
xinit: http://www.x.org
xinit:
xinit:
xinit:

PACKAGE NAME:  xinput-1.5.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xinput: xinput
xinput:
xinput: xinput is a utility to configure and test XInput devices. It wasn't
xinput: originally designed to be the primary tool for doing this but it's
xinput: still pretty much the only program out there for doing it. :-)
xinput:
xinput: xinput is part of X11.
xinput:
xinput: For more information about the X.Org Foundation (the providers of the
xinput: X.Org implementation of the X Window System), see their website:
xinput: http://www.x.org

PACKAGE NAME:  xkbcomp-1.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  95 K
PACKAGE SIZE (uncompressed):  270 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkbcomp: xkbcomp
xkbcomp:
xkbcomp: xkbcomp is part of X11.
xkbcomp:
xkbcomp: For more information about the X.Org Foundation (the providers of the
xkbcomp: X.Org implementation of the X Window System), see their website:
xkbcomp:
xkbcomp: http://www.x.org
xkbcomp:
xkbcomp:
xkbcomp:

PACKAGE NAME:  xkbevd-1.1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkbevd: xkbevd
xkbevd:
xkbevd: xkbevd is part of X11.
xkbevd:
xkbevd: For more information about the X.Org Foundation (the providers of the
xkbevd: X.Org implementation of the X Window System), see their website:
xkbevd:
xkbevd: http://www.x.org
xkbevd:
xkbevd:
xkbevd:

PACKAGE NAME:  xkbprint-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  50 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkbprint: xkbprint
xkbprint:
xkbprint: xkbprint is part of X11.
xkbprint:
xkbprint: For more information about the X.Org Foundation (the providers of the
xkbprint: X.Org implementation of the X Window System), see their website:
xkbprint:
xkbprint: http://www.x.org
xkbprint:
xkbprint:
xkbprint:

PACKAGE NAME:  xkbutils-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkbutils: xkbutils
xkbutils:
xkbutils: xkbutils is part of X11.
xkbutils:
xkbutils: For more information about the X.Org Foundation (the providers of the
xkbutils: X.Org implementation of the X Window System), see their website:
xkbutils:
xkbutils: http://www.x.org
xkbutils:
xkbutils:
xkbutils:

PACKAGE NAME:  xkeyboard-config-2.2.1-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  477 K
PACKAGE SIZE (uncompressed):  4800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkeyboard-config: xkeyboard-config
xkeyboard-config:
xkeyboard-config: xkeyboard-config is part of X11.
xkeyboard-config:
xkeyboard-config: For more information about the X.Org Foundation (the providers of the
xkeyboard-config: X.Org implementation of the X Window System), see their website:
xkeyboard-config:
xkeyboard-config: http://www.x.org
xkeyboard-config:
xkeyboard-config:
xkeyboard-config:

PACKAGE NAME:  xkill-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xkill: xkill
xkill:
xkill: xkill is part of X11.
xkill:
xkill: For more information about the X.Org Foundation (the providers of the
xkill: X.Org implementation of the X Window System), see their website:
xkill:
xkill: http://www.x.org
xkill:
xkill:
xkill:

PACKAGE NAME:  xload-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xload: xload
xload:
xload: xload is part of X11.
xload:
xload: For more information about the X.Org Foundation (the providers of the
xload: X.Org implementation of the X Window System), see their website:
xload:
xload: http://www.x.org
xload:
xload:
xload:

PACKAGE NAME:  xlogo-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xlogo: xlogo
xlogo:
xlogo: xlogo is part of X11.
xlogo:
xlogo: For more information about the X.Org Foundation (the providers of the
xlogo: X.Org implementation of the X Window System), see their website:
xlogo:
xlogo: http://www.x.org
xlogo:
xlogo:
xlogo:

PACKAGE NAME:  xlsatoms-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xlsatoms: xlsatoms
xlsatoms:
xlsatoms: xlsatoms is part of X11.
xlsatoms:
xlsatoms: For more information about the X.Org Foundation (the providers of the
xlsatoms: X.Org implementation of the X Window System), see their website:
xlsatoms:
xlsatoms: http://www.x.org
xlsatoms:
xlsatoms:
xlsatoms:

PACKAGE NAME:  xlsclients-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xlsclients: xlsclients
xlsclients:
xlsclients: xlsclients is part of X11.
xlsclients:
xlsclients: For more information about the X.Org Foundation (the providers of the
xlsclients: X.Org implementation of the X Window System), see their website:
xlsclients:
xlsclients: http://www.x.org
xlsclients:
xlsclients:
xlsclients:

PACKAGE NAME:  xlsfonts-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  18 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xlsfonts: xlsfonts
xlsfonts:
xlsfonts: xlsfonts is part of X11.
xlsfonts:
xlsfonts: For more information about the X.Org Foundation (the providers of the
xlsfonts: X.Org implementation of the X Window System), see their website:
xlsfonts:
xlsfonts: http://www.x.org
xlsfonts:
xlsfonts:
xlsfonts:

PACKAGE NAME:  xmag-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xmag: xmag
xmag:
xmag: xmag is part of X11.
xmag:
xmag: For more information about the X.Org Foundation (the providers of the
xmag: X.Org implementation of the X Window System), see their website:
xmag:
xmag: http://www.x.org
xmag:
xmag:
xmag:

PACKAGE NAME:  xman-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  140 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xman: xman
xman:
xman: xman is part of X11.
xman:
xman: For more information about the X.Org Foundation (the providers of the
xman: X.Org implementation of the X Window System), see their website:
xman:
xman: http://www.x.org
xman:
xman:
xman:

PACKAGE NAME:  xmessage-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xmessage: xmessage
xmessage:
xmessage: xmessage is part of X11.
xmessage:
xmessage: For more information about the X.Org Foundation (the providers of the
xmessage: X.Org implementation of the X Window System), see their website:
xmessage:
xmessage: http://www.x.org
xmessage:
xmessage:
xmessage:

PACKAGE NAME:  xmh-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  79 K
PACKAGE SIZE (uncompressed):  190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xmh: xmh
xmh:
xmh: xmh is part of X11.
xmh:
xmh: For more information about the X.Org Foundation (the providers of the
xmh: X.Org implementation of the X Window System), see their website:
xmh:
xmh: http://www.x.org
xmh:
xmh:
xmh:

PACKAGE NAME:  xmodmap-1.0.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  29 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xmodmap: xmodmap
xmodmap:
xmodmap: xmodmap is part of X11.
xmodmap:
xmodmap: For more information about the X.Org Foundation (the providers of the
xmodmap: X.Org implementation of the X Window System), see their website:
xmodmap:
xmodmap: http://www.x.org
xmodmap:
xmodmap:
xmodmap:

PACKAGE NAME:  xmore-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xmore: xmore
xmore:
xmore: xmore is part of X11.
xmore:
xmore: For more information about the X.Org Foundation (the providers of the
xmore: X.Org implementation of the X Window System), see their website:
xmore:
xmore: http://www.x.org
xmore:
xmore:
xmore:

PACKAGE NAME:  xorg-cf-files-1.0.4-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  181 K
PACKAGE SIZE (uncompressed):  1320 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xorg-cf-files: xorg-cf-files
xorg-cf-files:
xorg-cf-files: xorg-cf-files is part of X11.
xorg-cf-files:
xorg-cf-files: For more information about the X.Org Foundation (the providers of the
xorg-cf-files: X.Org implementation of the X Window System), see their website:
xorg-cf-files:
xorg-cf-files: http://www.x.org
xorg-cf-files:
xorg-cf-files:
xorg-cf-files:

PACKAGE NAME:  xorg-docs-1.6-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  248 K
PACKAGE SIZE (uncompressed):  1800 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xorg-docs: xorg-docs
xorg-docs:
xorg-docs: xorg-docs is part of X11.
xorg-docs:
xorg-docs: For more information about the X.Org Foundation (the providers of the
xorg-docs: X.Org implementation of the X Window System), see their website:
xorg-docs:
xorg-docs: http://www.x.org
xorg-docs:
xorg-docs:
xorg-docs:

PACKAGE NAME:  xorg-server-1.9.5-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  1878 K
PACKAGE SIZE (uncompressed):  9070 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xorg-server: xorg-server (The Xorg server, the core of the X Window System)
xorg-server:
xorg-server: Xorg is a full featured X server that was originally designed for UNIX
xorg-server: and UNIX-like operating systems running on Intel x86 hardware.  It now
xorg-server: runs on a wider range of hardware and OS platforms.  This work was
xorg-server: derived by the X.Org Foundation from the XFree86 Project's XFree86
xorg-server: 4.4rc2  release.  The XFree86 release was originally derived from X386
xorg-server: 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics
xorg-server: Consulting Service.
xorg-server:
xorg-server: The home page for the X project is:  http://www.x.org

PACKAGE NAME:  xorg-sgml-doctools-1.7-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  19 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xorg-sgml-doctools: xorg-sgml-doctools
xorg-sgml-doctools:
xorg-sgml-doctools: xorg-sgml-doctools is part of X11.
xorg-sgml-doctools:
xorg-sgml-doctools: For more information about the X.Org Foundation (the providers of the
xorg-sgml-doctools: X.Org implementation of the X Window System), see their website:
xorg-sgml-doctools:
xorg-sgml-doctools: http://www.x.org
xorg-sgml-doctools:
xorg-sgml-doctools:
xorg-sgml-doctools:

PACKAGE NAME:  xpr-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xpr: xpr
xpr:
xpr: xpr is part of X11.
xpr:
xpr: For more information about the X.Org Foundation (the providers of the
xpr: X.Org implementation of the X Window System), see their website:
xpr:
xpr: http://www.x.org
xpr:
xpr:
xpr:

PACKAGE NAME:  xprop-1.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  33 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xprop: xprop
xprop:
xprop: xprop is part of X11.
xprop:
xprop: For more information about the X.Org Foundation (the providers of the
xprop: X.Org implementation of the X Window System), see their website:
xprop:
xprop: http://www.x.org
xprop:
xprop:
xprop:

PACKAGE NAME:  xproto-7.0.21-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  188 K
PACKAGE SIZE (uncompressed):  2040 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xproto: xproto
xproto:
xproto: xproto is part of X11.
xproto:
xproto: For more information about the X.Org Foundation (the providers of the
xproto: X.Org implementation of the X Window System), see their website:
xproto:
xproto: http://www.x.org
xproto:
xproto:
xproto:

PACKAGE NAME:  xpyb-1.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  106 K
PACKAGE SIZE (uncompressed):  1830 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xpyb: xpyb
xpyb:
xpyb: xpyb is part of X11.
xpyb:
xpyb: For more information about the X.Org Foundation (the providers of the
xpyb: X.Org implementation of the X Window System), see their website:
xpyb:
xpyb: http://www.x.org
xpyb:
xpyb:
xpyb:

PACKAGE NAME:  xrandr-1.3.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  46 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xrandr: xrandr
xrandr:
xrandr: xrandr is part of X11.
xrandr:
xrandr: For more information about the X.Org Foundation (the providers of the
xrandr: X.Org implementation of the X Window System), see their website:
xrandr:
xrandr: http://www.x.org
xrandr:
xrandr:
xrandr:

PACKAGE NAME:  xrdb-1.0.9-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  23 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xrdb: xrdb
xrdb:
xrdb: xrdb is part of X11.
xrdb:
xrdb: For more information about the X.Org Foundation (the providers of the
xrdb: X.Org implementation of the X Window System), see their website:
xrdb:
xrdb: http://www.x.org
xrdb:
xrdb:
xrdb:

PACKAGE NAME:  xrefresh-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xrefresh: xrefresh
xrefresh:
xrefresh: xrefresh is part of X11.
xrefresh:
xrefresh: For more information about the X.Org Foundation (the providers of the
xrefresh: X.Org implementation of the X Window System), see their website:
xrefresh:
xrefresh: http://www.x.org
xrefresh:
xrefresh:
xrefresh:

PACKAGE NAME:  xscope-1.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  97 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xscope: xscope
xscope:
xscope: xscope is part of X11.
xscope:
xscope: For more information about the X.Org Foundation (the providers of the
xscope: X.Org implementation of the X Window System), see their website:
xscope:
xscope: http://www.x.org
xscope:
xscope:
xscope:

PACKAGE NAME:  xset-1.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xset: xset
xset:
xset: xset is part of X11.
xset:
xset: For more information about the X.Org Foundation (the providers of the
xset: X.Org implementation of the X Window System), see their website:
xset:
xset: http://www.x.org
xset:
xset:
xset:

PACKAGE NAME:  xsetroot-1.1.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  17 K
PACKAGE SIZE (uncompressed):  60 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xsetroot: xsetroot
xsetroot:
xsetroot: xsetroot is part of X11.
xsetroot:
xsetroot: For more information about the X.Org Foundation (the providers of the
xsetroot: X.Org implementation of the X Window System), see their website:
xsetroot:
xsetroot: http://www.x.org
xsetroot:
xsetroot:
xsetroot:

PACKAGE NAME:  xsm-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  51 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xsm: xsm
xsm:
xsm: xsm is part of X11.
xsm:
xsm: For more information about the X.Org Foundation (the providers of the
xsm: X.Org implementation of the X Window System), see their website:
xsm:
xsm: http://www.x.org
xsm:
xsm:
xsm:

PACKAGE NAME:  xstdcmap-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  15 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xstdcmap: xstdcmap
xstdcmap:
xstdcmap: xstdcmap is part of X11.
xstdcmap:
xstdcmap: For more information about the X.Org Foundation (the providers of the
xstdcmap: X.Org implementation of the X Window System), see their website:
xstdcmap:
xstdcmap: http://www.x.org
xstdcmap:
xstdcmap:
xstdcmap:

PACKAGE NAME:  xterm-267-x86_64-1.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  236 K
PACKAGE SIZE (uncompressed):  640 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xterm: xterm (terminal emulator for X)
xterm:
xterm: The xterm program is a terminal emulator for the X Window System.
xterm: It provides DEC VT102/VT220 (VTxxx) and Tektronix 4014 compatible
xterm: terminals for programs that cannot use the window system directly.
xterm:
xterm:
xterm:
xterm:
xterm:
xterm:

PACKAGE NAME:  xtrans-1.2.6-noarch-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  62 K
PACKAGE SIZE (uncompressed):  380 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xtrans: xtrans
xtrans:
xtrans: xtrans is part of X11.
xtrans:
xtrans: For more information about the X.Org Foundation (the providers of the
xtrans: X.Org implementation of the X Window System), see their website:
xtrans:
xtrans: http://www.x.org
xtrans:
xtrans:
xtrans:

PACKAGE NAME:  xvidtune-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  25 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xvidtune: xvidtune
xvidtune:
xvidtune: xvidtune is part of X11.
xvidtune:
xvidtune: For more information about the X.Org Foundation (the providers of the
xvidtune: X.Org implementation of the X Window System), see their website:
xvidtune:
xvidtune: http://www.x.org
xvidtune:
xvidtune:
xvidtune:

PACKAGE NAME:  xvinfo-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  14 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xvinfo: xvinfo
xvinfo:
xvinfo: xvinfo is part of X11.
xvinfo:
xvinfo: For more information about the X.Org Foundation (the providers of the
xvinfo: X.Org implementation of the X Window System), see their website:
xvinfo:
xvinfo: http://www.x.org
xvinfo:
xvinfo:
xvinfo:

PACKAGE NAME:  xwd-1.0.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xwd: xwd
xwd:
xwd: xwd is part of X11.
xwd:
xwd: For more information about the X.Org Foundation (the providers of the
xwd: X.Org implementation of the X Window System), see their website:
xwd:
xwd: http://www.x.org
xwd:
xwd:
xwd:

PACKAGE NAME:  xwininfo-1.1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  31 K
PACKAGE SIZE (uncompressed):  100 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xwininfo: xwininfo
xwininfo:
xwininfo: xwininfo is part of X11.
xwininfo:
xwininfo: For more information about the X.Org Foundation (the providers of the
xwininfo: X.Org implementation of the X Window System), see their website:
xwininfo:
xwininfo: http://www.x.org
xwininfo:
xwininfo:
xwininfo:

PACKAGE NAME:  xwud-1.0.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./x
PACKAGE SIZE (compressed):  22 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xwud: xwud
xwud:
xwud: xwud is part of X11.
xwud:
xwud: For more information about the X.Org Foundation (the providers of the
xwud: X.Org implementation of the X Window System), see their website:
xwud:
xwud: http://www.x.org
xwud:
xwud:
xwud:

PACKAGE NAME:  MPlayer-20101218-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  8918 K
PACKAGE SIZE (uncompressed):  25930 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
MPlayer: MPlayer (media player)
MPlayer:
MPlayer: MPlayer is a movie player.  It plays most MPEG/VOB, AVI, Ogg/OGM,
MPlayer: VIVO, ASF/WMA/WMV, QT/MOV/MP4, RealMedia, Matroska, NUT, NuppelVideo,
MPlayer: FLI, YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim,
MPlayer: and Win32 DLL codecs.  You can watch VideoCD, SVCD, DVD, 3ivx,
MPlayer: DivX 3/4/5, WMV and even H.264 movies.
MPlayer:
MPlayer: Homepage for MPlayer is http://www.mplayerhq.hu/
MPlayer:
MPlayer:

PACKAGE NAME:  PySolFC-1.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  3399 K
PACKAGE SIZE (uncompressed):  12810 K
PACKAGE REQUIRED:  python >= 2.7.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
PySolFC: PySolFC  (solitaire card games written in python)
PySolFC: an exciting collection of more than 200 solitaire card games.
PySolFC: Its features include very nice look and feel, multiple cardsets and 
PySolFC: table tiles, samples and background music, unlimited undo/redo, 
PySolFC: load/save games, player statistics and log files, hint system, demo 
PySolFC: games, support for user-written plugins, integrated HTML help browser
PySolFC: and lots of documentation. PySol is written in 100% pure Python.
PySolFC: 
PySolFC: License: GPL
PySolFC: Author:  Markus F.X.J. Oberhumer
PySolFC: Website: http://www.pysol.org

PACKAGE NAME:  abiword-2.8.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  4673 K
PACKAGE SIZE (uncompressed):  23250 K
PACKAGE REQUIRED:  aiksaurus >= 1.2.1,aspell >= 0.60.5,boost >= 1.40.0,enchant >= 1.4.2,fribidi >= 0.10.9,glib2 >= 2.22.2,goffice >= 0.8.0,gtk+2 >= 2.18.3,gtkmathview >= 0.8.0,gucharmap >= 2.28.1,libpng >= 1.4.0,libsoup >= 2.28.1,libwpd >= 0.8.14,libwpg >= 0.1.3,libwmf >= 0.2.8.4,link-grammar >= 4.6.4,loudmouth >= 1.4.2,mathml-fonts >= 1.0,ots >= 0.5.0,tidy >= 20091027,wv >= 1.2.7
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
abiword|-----handy-ruler------------------------------------------------------|
abiword: abiword (The AbiWord word processor)
abiword:
abiword: AbiWord is a cross-platform Open Source word processor. The goal is
abiword: to make AbiWord full-featured, and remain lean.
abiword:
abiword: http://www.abisource.com/
abiword:
abiword:
abiword: Packager: vl70@vector.linux.net on 14-Feb-2011
abiword:
abiword:

PACKAGE NAME:  aiksaurus-1.2.1-x86_64-3vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  323 K
PACKAGE SIZE (uncompressed):  730 K
PACKAGE REQUIRED:  gtk+2 >= 2.10.14
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
aiksaurus|-----handy-ruler------------------------------------------------------|
aiksaurus: aiksaurus (An English-language thesaurus library)
aiksaurus:
aiksaurus: Aiksaurus is an English-language thesaurus library that can be 
aiksaurus: embedded in word processors, email composers, and other authoring
aiksaurus: software to provide thesaurus capabilities. A basic command line 
aiksaurus: thesaurus program is also included.
aiksaurus:
aiksaurus: http://aiksaurus.sourceforge.net/
aiksaurus:
aiksaurus:
aiksaurus: Packager: vl70@vector.linux.net on 13-Feb-2011

PACKAGE NAME:  audacious-2.4.4-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  420 K
PACKAGE SIZE (uncompressed):  1810 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
audacious: audacious (A relatively powerful media player)
audacious:
audacious: Audacious is a media player, based on Beep Media Player, which is in
audacious: turn based on the X Multimedia System (XMMS).  It is used to play
audacious: audio and other kinds of media files.  By default Audacious can play
audacious: MPEG audio, Ogg Vorbis, RIFF wav, most module formats, and a few
audacious: other formats.  Audacious can be extended through plugins to play a
audacious: number of other audio and video formats.
audacious:
audacious: The webpage for Audacious is: http://www.audacious-media-player.org.
audacious:

PACKAGE NAME:  audacious-plugins-2.4.4-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1358 K
PACKAGE SIZE (uncompressed):  5580 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
audacious-plugins: audacious-plugins (Plugins used by the Audacious media player)
audacious-plugins:
audacious-plugins: This is a collection of plugins for Audacious to support additional
audacious-plugins: media formats.
audacious-plugins:
audacious-plugins: The webpage for Audacious is: http://www.audacious-media-player.org.
audacious-plugins:
audacious-plugins:
audacious-plugins:
audacious-plugins:
audacious-plugins:

PACKAGE NAME:  dia-0.97.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  3177 K
PACKAGE SIZE (uncompressed):  18670 K
PACKAGE REQUIRED:  gtk+2 >= 2.18.3,pygtk >= 2.16.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dia: dia (Diagram drawing program)
dia:
dia: The Dia drawing program can be used to draw different types of
dia: diagrams, and includes support for UML static structure diagrams
dia: (class diagrams), entity relationship modeling, and network diagrams.
dia: Dia can load and save diagrams to a custom file format, can load and
dia: save in .xml format, and can export to PostScript(TM).
dia:
dia: http://www.gnome.org/projects/dia/
dia:
dia: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  epdfview-0.1.7-x86_64-4vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  101 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  cups >= 1.3.9,glib2 >= 2.20.0,gtk+2 >= 2.16.0,poppler >= 0.10.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
epdfview|-----handy-ruler------------------------------------------------------|
epdfview: epdfview (Lightweight PDF document viewer)
epdfview:
epdfview: ePDFView is a lightweight PDF document viewer using Poppler and GTK+
epdfview: libraries. The aim of ePDFView is to make a simple PDF document
epdfview: viewer, in the lines of Evince but without using the Gnome libraries.
epdfview:
epdfview: http://trac.emma-soft.com/epdfview
epdfview:
epdfview:
epdfview: Packager: root@vector.linux.net on 26-Feb-2011
epdfview:

PACKAGE NAME:  exaile-0.3.2.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1155 K
PACKAGE SIZE (uncompressed):  8390 K
PACKAGE REQUIRED:  dbus >= 1.2.3,dbus-python >= 0.83.0,gstreamer >= 0.10.21,gst-plugins-base >= 0.10.21,gst-plugins-good >= 0.10.9,gst-python >= 0.10.13,gtk+2 >= 2.14.3,libgpod >= 0.6.0,pygtk >= 2.13.0,python >= 2.6,python-cddb >= 1.4,python-mutagen >= 1.14,python-sexy >= 0.1.9,python-sqlite >= 2.5.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
exaile|-----handy-ruler------------------------------------------------------|
exaile: exaile (A music player)
exaile:
exaile: Exaile is a media player aiming to be similar to KDE's AmaroK, but
exaile: for GTK+. It incorporates many of the cool things from AmaroK (and
exaile: other media players) like automatic fetching of album art, handling
exaile: of large libraries, lyrics fetching, artist/album information via
exaile: the wikipedia, last.fm support, optional iPod support (assuming you
exaile: have python-gpod installed).
exaile:
exaile: http://www.exaile.org
exaile: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  flash-player-10-x86-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  3653 K
PACKAGE SIZE (uncompressed):  11700 K
PACKAGE REQUIRED:  curl >= 7.20.0,gtk+2,nss
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flash-player: flash-player (Play Adobe Flash content)
flash-player:
flash-player: Adobe Flash Player is the high-performance, lightweight, highly
flash-player: expressive client runtime that delivers powerful and consistent
flash-player: user experiences across major operating systems, browsers, mobile
flash-player: phones, and devices.  It enables organizations and individuals to
flash-player: build and deliver great digital experiences to their end users.
flash-player: This package includes both the plugin and the standalone player.
flash-player: Homepage: http://www.flash.com/
flash-player:
flash-player: Packager: vl70@vector.Linux.net on 16-Jan-2011

PACKAGE NAME:  fluxbox-1.3.1-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  707 K
PACKAGE SIZE (uncompressed):  3760 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fluxbox: fluxbox (Fluxbox window manager)
fluxbox:
fluxbox: Fluxbox is yet another windowmanager for X that is based on blackbox
fluxbox: but with many new features.
fluxbox:
fluxbox:
fluxbox:
fluxbox:
fluxbox:
fluxbox:
fluxbox:

PACKAGE NAME:  galculator-1.3.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  103 K
PACKAGE SIZE (uncompressed):  770 K
PACKAGE REQUIRED:  gtk2 >= 2.14.4,libglade >= 2.6.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
galculator|-----handy-ruler------------------------------------------------------|
galculator: galculator (GTK 2 based scientific calculator)
galculator:
galculator: galculator is a GTK 2 based scientific calculator with "ordinary" and
galculator: reverse polish notation.
galculator:
galculator: http://galculator.sourceforge.net/
galculator:
galculator:
galculator: Packager: vl70@vector.linux.net on 14-Feb-2011
galculator:
galculator:

PACKAGE NAME:  gdm-2.20.11-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  2217 K
PACKAGE SIZE (uncompressed):  15050 K
PACKAGE REQUIRED:  bluecurve-icon-theme,consolekit >= 0.3.0,fedorainfinity-gdm-theme,glib2 >= 2.20.1,gtk+2 >= 2.16.1,hal >= 0.5.11,libglade >= 2.6.4,libgnomecanvas >= 2.26.0,nss >= 3.12.2.0,pango >= 1.24.0,shadow >= 4.1.2.2,rarian,zenity >= 2.24.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gdm: gdm (The GNOME Display Manager)
gdm:
gdm: Gdm (the GNOME Display Manager) is a highly configurable
gdm: reimplementation of xdm, the X Display Manager. Gdm allows you to log
gdm: into your system with the X Window System running and supports running
gdm: several different X sessions on your local machine at the same time.
gdm:
gdm: http://download.gnome.org/sources/gdm
gdm:
gdm:
gdm: Packager: vl70@vector.linux.net on 23-Feb-2011

PACKAGE NAME:  geany-0.19.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1916 K
PACKAGE SIZE (uncompressed):  6860 K
PACKAGE REQUIRED:  glib2 >= 2.20.1,gtk+2 >= 2.16.1,pango >= 1.24.1,vte >= 0.20.1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
geany|-----handy-ruler------------------------------------------------------|
geany: geany (A fast and lightweight IDE using GTK2)
geany:
geany: Geany is a small and fast editor with basic features of an
geany: integrated development environment.
geany:
geany: http://www.geany.org/
geany:
geany:
geany: Packager: vl70@vector.linux.net on 14-Feb-2011
geany:
geany:

PACKAGE NAME:  geany-plugins-0.19-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  353 K
PACKAGE SIZE (uncompressed):  1950 K
PACKAGE REQUIRED:  enchant >= 1.5.0,geany >= 0.19,gtkspell >= 2.0.15,lua >= 5.1.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
geany-plugins|-----handy-ruler------------------------------------------------------|
geany-plugins: geany-plugins (Plugins for Geany)
geany-plugins:
geany-plugins: Plugins for Geany.
geany-plugins:
geany-plugins: http://plugins.geany.org/
geany-plugins:
geany-plugins:
geany-plugins: Packager: vl70@vector.linux.net on 14-Feb-2011
geany-plugins:
geany-plugins:
geany-plugins:

PACKAGE NAME:  gecko-mediaplayer-1.0.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  70 K
PACKAGE SIZE (uncompressed):  550 K
PACKAGE REQUIRED:  gnome-mplayer
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gecko-mediaplayer: gecko-mediaplayer (Browser plugin to play media using gnome-mplayer)
gecko-mediaplayer:
gecko-mediaplayer: Gecko Media Player is a browser plugin that uses GNOME MPlayer to play
gecko-mediaplayer: media in a browser. It should work with all browsers on Unix-ish
gecko-mediaplayer: systems(Linux, BSD, Solaris) and use the NS4 API (Mozilla, Firefox,
gecko-mediaplayer: Opera, etc.).
gecko-mediaplayer:
gecko-mediaplayer: http://code.google.com/p/gecko-mediaplayer/
gecko-mediaplayer:
gecko-mediaplayer:
gecko-mediaplayer: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  geeqie-1.0-x86_64-3.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  767 K
PACKAGE SIZE (uncompressed):  4280 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
geeqie: geeqie (Geeqie image viewer)
geeqie:
geeqie: Geeqie is an interactive GTK based image viewer that supports multiple
geeqie: image formats, zooming, panning, thumbnails, and sorting images into
geeqie: collections.
geeqie:
geeqie: Homepage:  http://geeqie.sourceforge.net
geeqie:
geeqie:
geeqie:
geeqie:
geeqie:

PACKAGE NAME:  gftp-2.0.19-x86_64-2.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  576 K
PACKAGE SIZE (uncompressed):  3630 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gftp: gftp (FTP client for X)
gftp:
gftp: gFTP is a multithreaded FTP client for X written using GTK+.  It
gftp: features simultaneous downloads, resuming of interrupted file
gftp: transfers, file transfer queues, downloading of entire directories,
gftp: ftp proxy support, remote directory caching, passive and non-passive
gftp: file transfers, drag-n-drop support, bookmarks menu, stop button,
gftp: and many more features.
gftp:
gftp:
gftp:

PACKAGE NAME:  gimp-2.6.11-x86_64-2.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  9994 K
PACKAGE SIZE (uncompressed):  57890 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gimp: gimp (The GNU Image Manipulation Program)
gimp:
gimp: The GIMP is a powerful tool for the preparation and manipulation of
gimp: digital images.  The GIMP provides the user with a wide variety of
gimp: image manipulation, painting, processing, and rendering tools.  The
gimp: GIMP's open design and extensible architecture make for a very
gimp: powerful end product for photo and image retouching, web graphics
gimp: design, or digital illustration.
gimp:
gimp:
gimp:

PACKAGE NAME:  gkrellm-2.3.5-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  523 K
PACKAGE SIZE (uncompressed):  2070 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gkrellm: gkrellm (GNU Krell Monitors)
gkrellm:
gkrellm: GKrellM charts SMP CPU, load, Disk, and all active net interfaces
gkrellm: automatically. An on/off button and online timer for the PPP interface
gkrellm: is provided. Monitors for memory and swap usage, file system, internet
gkrellm: connections, APM laptop battery, mbox style mailboxes, and cpu temps.
gkrellm: Also includes an uptime monitor, hostname label, and clock/calendar.
gkrellm:
gkrellm: Bill Wilson is the author of GKrellM.
gkrellm:
gkrellm:

PACKAGE NAME:  gksu-2.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  133 K
PACKAGE SIZE (uncompressed):  650 K
PACKAGE REQUIRED:  atk >= 1.32.0-x86_64-1,cairo >= 1.10.2-x86_64-1,coreutils >= 8.10-x86_64-1 | floppy >= 5.4-x86_64-3 | kdeutils >= 4.5.5-x86_64-1 | shadow >= 4.1.4.2-x86_64-3 | sudo >= 1.7.4p6-x86_64-1 | vasm >= 7.0-noarch-1vl70,cxxlibs >= 6.0.14-x86_64-1 | gcc-g++ >= 4.5.2-x86_64-2,dbus >= 1.4.1-x86_64-1,expat >= 2.0.1-x86_64-2,fontconfig >= 2.8.0-x86_64-1,freetype >= 2.4.4-x86_64-1,gcc >= 4.5.2-x86_64-2,gconf >= 2.31.91-x86_64-1vl70,gdk-pixbuf2 >= 2.22.1-x86_64-2,glib2 >= 2.26.1-x86_64-2,glibc-solibs >= 2.13-x86_64-1,gnome-keyring >= 2.28.2-x86_64-1vl70,gtk+2 >= 2.22.1-x86_64-3,libICE >= 1.0.7-x86_64-1,libSM >= 1.2.0-x86_64-1,libX11 >= 1.4.1-x86_64-1,libXau >= 1.0.6-x86_64-1,libXcomposite >= 0.4.3-x86_64-1,libXcursor >= 1.1.11-x86_64-1,libXdamage >= 1.1.3-x86_64-1,libXdmcp >= 1.1.0-x86_64-1,libXext >= 1.2.0-x86_64-1,libXfixes >= 4.0.5-x86_64-1,libXi >= 1.4.1-x86_64-1,libXinerama >= 1.1.1-x86_64-1,libXrandr >= 1.3.1-x86_64-1,libXrender >= 0.9.6-x86_64-1,libgtop >= 2.28.1-x86_64-1vl70,libpng >= 1.4.5-x86_64-1,libxcb >= 1.7-x86_64-1,orbit2 >= 2.14.19-x86_64-1vl70,pango >= 1.28.3-x86_64-1,pixman >= 0.20.2-x86_64-1,scripts >= 1.0.1-noarch-2 | xauth >= 1.0.5-x86_64-1,startup-notification >= 0.10-x86_64-1,sudo >= 1.7.4p6-x86_64-1,util-linux-ng >= 2.18-x86_64-2,xcb-util >= 0.3.6-x86_64-1,zlib >= 1.2.5-x86_64-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gksu: gksu (a Gtk+ frontend to su and sudo)
gksu:
gksu: GKSu is a library that provides a Gtk+ frontend to su and sudo. It 
gksu: supports login shells and preserving environment when acting as a su
gksu: frontend. It is useful to menu items or other graphical programs that
gksu: need to ask a user's password to run another program as another user
gksu:
gksu: License: GPL
gksu: Authors: 
gksu: Website: 

PACKAGE NAME:  gnome-mplayer-0.9.9.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  276 K
PACKAGE SIZE (uncompressed):  1240 K
PACKAGE REQUIRED:  dbus >= 1.2.12,gtk+2 >= 2.16.0,libgpod >= 0.7.0,libmusicbrainz3 >= 3.0.2,libnotify >= 0.4.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-mplayer|-----handy-ruler------------------------------------------------------|
gnome-mplayer: gnome-mplayer (GUI for MPlayer)
gnome-mplayer:
gnome-mplayer: Gnome MPlayer is a simple GUI for MPlayer. It is intended to be a nice
gnome-mplayer: tight player and provide a simple and clean interface to MPlayer.
gnome-mplayer:
gnome-mplayer: http://code.google.com/p/gnome-mplayer/
gnome-mplayer:
gnome-mplayer:
gnome-mplayer: Packager: vl70@vector.linux.net on 14-Feb-2011
gnome-mplayer:
gnome-mplayer:

PACKAGE NAME:  gnumeric-1.10.13-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  10552 K
PACKAGE SIZE (uncompressed):  31730 K
PACKAGE REQUIRED:  guile >= 1.8.7,libgsf >= 1.14.18,goffice >= 0.8.10,perl >= 5.12.1,pygtk >= 2.21.0,python >= 2.7
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnumeric: gnumeric (Spreadsheet program for GNOME)
gnumeric:
gnumeric: Gnumeric is a spreadsheet program for the GNOME GUI desktop
gnumeric: environment.
gnumeric:
gnumeric: http://www.gnome.org/gnumeric/
gnumeric:
gnumeric:
gnumeric: Packager: vl70@vector.linux.net on 26-Mar-2011
gnumeric:
gnumeric:

PACKAGE NAME:  grip-3.3.1-x86_64-8vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  403 K
PACKAGE SIZE (uncompressed):  1020 K
PACKAGE REQUIRED:  cdparanoia >= III_10.2,curl >= 7.19.0,glib2 >= 2.20.3,gtk+2 >= 2.16.2,id3lib >= 3.8.3,libbonobo >= 2.24.0,libbonoboui >= 2.24.0,libgnome >= 2.24.0,libgnomeui >= 2.24.0,vorbis-tools,vte >= 0.20.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
grip: grip (Front-end for CD rippers and Ogg Vorbis encoders)
grip:
grip: Grip is a GTK+ based front-end for CD rippers (such as cdparanoia and
grip: cdda2wav) and Ogg Vorbis encoders. Grip allows you to rip entire
grip: tracks or just a section of a track. Grip supports the CDDB protocol
grip: for accessing track information on disc database servers.
grip:
grip: http://www.nostatic.org/grip/
grip:
grip:
grip: Packager: vl70@vector.linux.net on 17-Feb-2011

PACKAGE NAME:  gucharmap-2.33.2-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  2082 K
PACKAGE SIZE (uncompressed):  7260 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gucharmap: gucharmap (character map utility)
gucharmap:
gucharmap: gucharmap is a Unicode character map and font viewer.
gucharmap:
gucharmap:
gucharmap:
gucharmap:
gucharmap:
gucharmap:
gucharmap:
gucharmap:

PACKAGE NAME:  imagemagick-6.6.6_10-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  4761 K
PACKAGE SIZE (uncompressed):  31020 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
imagemagick: imagemagick (a robust collection of image processing tools)
imagemagick:
imagemagick: ImageMagick is a collection of tools for manipulating and displaying
imagemagick: digital images.  It can merge images, transform image dimensions,
imagemagick: do screen captures, create animation sequences, and convert between
imagemagick: many different image formats.  
imagemagick:
imagemagick: ImageMagick was written by John Cristy of ImageMagick Studio.
imagemagick:
imagemagick: Home page:  http://www.imagemagick.org/
imagemagick:

PACKAGE NAME:  inkscape-0.48.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  10644 K
PACKAGE SIZE (uncompressed):  83360 K
PACKAGE REQUIRED:  atk >= 1.24.0,boost >= 1.37.0,cairo >= 1.8.6,dia >= 0.97,freetype >= 2.3.7,gc >= 7.0,gtkmm >= 2.14.3,gtkspell >= 2.0.15,imagemagick >= 6.5.9.0,lcms >= 1.17,libpng >= 1.4.0,libsigc++ >= 2.2.0,libxml2 >= 2.7.2,libxslt >= 1.1.24,libwpg >= 0.1.3,loudmouth >= 1.4.2,numpy >= 1.2.0,pango >= 1.22.4,perl >= 5.10.0,python >= 2.6,python-lxml >= 2.1.1,poppler >= 0.12.2,popt >= 1.14,pstoedit >= 3.45,uniconvertor >= 1.1.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
inkscape: inkscape (Vector-based drawing program using SVG)
inkscape:
inkscape: Inkscape is a free vector-based drawing program.
inkscape: Inkscape uses W3C SVG as its native file format. It is therefore a
inkscape: very useful tool for web designers and as an interchange format for
inkscape: desktop publishing.
inkscape:
inkscape: http://inkscape.sourceforge.net/
inkscape:
inkscape:
inkscape: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  ktsuss-1.4-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  30 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ktsuss: ktsuss (a gtk su helper)
ktsuss:
ktsuss: ktsuss stands for "keep the su simple, stupid", and as the name 
ktsuss: implies, is a graphical version of su written in C and GTK+ 2
ktsuss: (similar in functionality to kdesu and gksu).
ktsuss:
ktsuss: The goal of the project is to remain simple and bug free...
ktsuss:
ktsuss: Homepage: http://developer.berlios.de/projects/ktsuss
ktsuss:
ktsuss:

PACKAGE NAME:  sane-1.0.22-x86_64-2.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  2686 K
PACKAGE SIZE (uncompressed):  13960 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sane: sane (Scanner Access Now Easy)
sane:
sane: SANE is a universal scanner interface that provides standardized
sane: access to any raster image scanner hardware, such as flatbed scanners,
sane: hand-held scanners, video and still cameras, frame-grabbers, and other
sane: similar devices.
sane:
sane:
sane:
sane:
sane:

PACKAGE NAME:  scribus-1.3.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  11185 K
PACKAGE SIZE (uncompressed):  48920 K
PACKAGE REQUIRED:  cairo >= 1.8.8,cups >= 1.3.9,freetype >= 2.3.9,ghostscript >= 8.70,gnutls >= 2.8.1,hyphen >= 2.4,lcms >= 1.18,libart_lgpl >= 2.3.19,libjpeg >= 8,libpng >= 1.4.0,libtiff >= 3.9.2,libxml2 >= 2.7.3,openssl >= 0.9.8k | openssl-solibs >= 0.9.8k,podofo >= 0.7.0,python >= 2.6.2,pil >= 1.1.6,qt4 >= 4.5.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
scribus|-----handy-ruler------------------------------------------------------|
scribus: scribus (DeskTop Publishing application written in Qt)
scribus:
scribus: Scribus is an desktop open source page layout program with the aim of
scribus: producing commercial grade output in PDF and Postscript, primarily,
scribus: though not exclusively for Linux.
scribus:
scribus: http://www.scribus.net/
scribus:
scribus:
scribus: Packager: vl70@vector.linux.net on 14-Feb-2011
scribus:

PACKAGE NAME:  shotwell-0.8.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1733 K
PACKAGE SIZE (uncompressed):  7180 K
PACKAGE REQUIRED:  dbus-glib >= 0.86,gconf >= 2.28.0,gstreamer >= 0.10.31,gtk+2 >= 2.20.0,libexif >= 0.6.19,libgee >= 0.5.0,libgexiv2 >= 0.1.0,libgphoto2 >= 2.4.8,libraw >= 0.8.5,libunique >= 1.1.6,sqlite >= 2.6.23,udev >= 151,webkitgtk >= 1.3.2 | webkitgtk >= r62241
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
shotwell: shotwell (A photo organizer for the GNOME desktop)
shotwell:
shotwell: Shotwell is a new open source photo organizer designed for the GNOME
shotwell: desktop environment. It allows you to import photos from your camera,
shotwell: view and edit them, and share them with others.
shotwell:
shotwell: http://www.yorba.org/shotwell/
shotwell:
shotwell:
shotwell: Packager: vl70@vector.linux.net on 26-Mar-2011
shotwell:

PACKAGE NAME:  slim-1.3.1-x86_64-5vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  241 K
PACKAGE SIZE (uncompressed):  420 K
PACKAGE REQUIRED:  fontconfig >= 2.6.0,freetype >= 2.3.7,imagemagick >= 6.4.3_10,libXmu >= 1.0.4,libXft >= 2.1.13,libXrender >= 0.9.4,libpng >= 1.4.0,libjpeg >= 8,perl-file-desktopentry >= 0.02,xterm,xwd
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
slim|-----handy-ruler------------------------------------------------------|
slim: slim (Simple Login Manager)
slim:
slim: SLiM (Simple Login Manager) is a graphical login manager for X11.
slim: It aims to be simple, fast and independent from the various desktop
slim: environments.
slim: SLiM is based on latest stable release of Login.app by Per Lidén.
slim:
slim: http://slim.berlios.de/
slim:
slim:
slim: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  tango-icon-theme-0.8.90-noarch-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1216 K
PACKAGE SIZE (uncompressed):  8650 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
tango-icon-theme: Tango icon theme (Another standard icon theme)
tango-icon-theme:
tango-icon-theme: The Tango Desktop Project has designed a basic set of desktop icons
tango-icon-theme: that follow the style guidelines.  The set has been created as a
tango-icon-theme: proof of concept for the style, but works rather well as a replacement
tango-icon-theme: for the base theme under GNOME and KDE.
tango-icon-theme:
tango-icon-theme: Tango's home page is:  http://tango.freedesktop.org
tango-icon-theme:
tango-icon-theme:

PACKAGE NAME:  vlgui-6.0-noarch-1vl60.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  bash >= 3.0,Xdialog >= 2.2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
vlgui: VL GUI (Basic Vector Linux GUI)
vlgui: 
vlgui: Scripts and skeletons for GUI configuration.
vlgui: 
vlgui: Author: Eko M. Budi
vlgui: License: GNU GPL
vlgui: Homepage: www.vectorlinux.com

PACKAGE NAME:  x11-ssh-askpass-1.2.4.1-x86_64-2.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  24 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
x11-ssh-askpass: x11-ssh-askpass (an X11-based passphrase dialog)
x11-ssh-askpass:
x11-ssh-askpass: x11-ssh-askpass is an X11-based passphrase dialog for use
x11-ssh-askpass: with OpenSSH.
x11-ssh-askpass:
x11-ssh-askpass:
x11-ssh-askpass:
x11-ssh-askpass:
x11-ssh-askpass:
x11-ssh-askpass:
x11-ssh-askpass:

PACKAGE NAME:  xarchiver-0.5.2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  437 K
PACKAGE SIZE (uncompressed):  1320 K
PACKAGE REQUIRED:  gtk+2 >= 2.14.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xarchiver: xarchiver (Frontend to various archiver formats)
xarchiver:
xarchiver: Xarchiver, a lightweight GTK2 only frontend to 7zip, arj, bzip2, gzip,
xarchiver: iso, rar, lha, deb, rpm, tar and zip.
xarchiver:
xarchiver: http://xarchiver.xfce.org/
xarchiver:
xarchiver:
xarchiver: Packager: vl70@vector.linux.net on 26-Mar-2011
xarchiver:
xarchiver:

PACKAGE NAME:  xchat-2.8.8-x86_64-3.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1779 K
PACKAGE SIZE (uncompressed):  6940 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xchat: xchat (GTK+-based IRC client)
xchat:
xchat: X-Chat is a GTK+-based IRC (Internet Relay Chat) client.
xchat:
xchat:
xchat:
xchat:
xchat:
xchat:
xchat:
xchat:

PACKAGE NAME:  xdialog-2.3.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  304 K
PACKAGE SIZE (uncompressed):  670 K
PACKAGE REQUIRED:  gtk+ >= 1.2.10,gtk2 >= 2.14.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xdialog|-----handy-ruler------------------------------------------------------|
xdialog: xdialog (X11 drop in replacement for cdialog)
xdialog:
xdialog: Xdialog is designed to be a drop in replacement for the cdialog
xdialog: program. It converts any terminal based program into a program
xdialog: with an X-windows interface. The dialogs are easier to see and
xdialog: use and Xdialog adds even more functionalities (help button+box,
xdialog: treeview, editbox, file selector, range box, and much more).
xdialog:
xdialog: http://xdialog.free.fr
xdialog:
xdialog: Packager: vl70@vector.linux.net on 14-Feb-2011

PACKAGE NAME:  xfburn-0.4.3-x86_64-2vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  291 K
PACKAGE SIZE (uncompressed):  1490 K
PACKAGE REQUIRED:  gstreamer >= 0.10.22,gtk+2 >= 2.14.7,libburn >= 0.6.2,libisofs >= 0.6.12,xfce4-panel >= 4.7.4 | xfce >= 4.7.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfburn: xfburn (CD/DVD burning tool)
xfburn:
xfburn: Xfburn is a simple CD/DVD burning tool based on libburnia libraries.
xfburn: It can blank CD-RWs, burn and create iso images, as well as burn
xfburn: personal compositions of data to either CD or DVD.
xfburn:
xfburn: http://goodies.xfce.org/projects/applications/xfburn
xfburn:
xfburn:
xfburn: Packager: vl70@vector.linux.net on 26-Mar-2011
xfburn:

PACKAGE NAME:  xine-lib-1.1.19-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  3556 K
PACKAGE SIZE (uncompressed):  9730 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xine-lib: xine-lib (xine multimedia playback engine libraries)
xine-lib:
xine-lib: xine-lib is a free (GPL licensed) high-performance multimedia
xine-lib: playback engine.  The xine shared libraries are used by xine-ui (and
xine-lib: other media players and multimedia applications) for smooth video
xine-lib: processing and playback of multimedia streams such as movies, radio
xine-lib: and TV network streams, DVDs, and VCDs.
xine-lib:
xine-lib:
xine-lib:
xine-lib:

PACKAGE NAME:  xine-ui-0.99.5-x86_64-3.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1251 K
PACKAGE SIZE (uncompressed):  3310 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xine-ui: xine-ui (xine multimedia playback engine user interface)
xine-ui:
xine-ui: Xine is a free multimedia player.  It plays back CDs, DVDs, and VCDs,
xine-ui: multimedia files, and multimedia streamed over a network.
xine-ui:
xine-ui: The xine-ui package contains the graphical user interface for the
xine-ui: xine multimedia player.
xine-ui:
xine-ui:
xine-ui:
xine-ui:

PACKAGE NAME:  xlockmore-5.32-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  992 K
PACKAGE SIZE (uncompressed):  3480 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xlockmore: xlockmore (screen locker for X)
xlockmore:
xlockmore: Patrick J. Naughton's xlock screensaver/locker for X, with many
xlockmore: more modes added by David A. Bagley.
xlockmore:
xlockmore: The 'Bob' bitmap has been included especially for Slackware, as well
xlockmore: as a Linux penguin logo.  (NOTE: the image of J. R. "Bob" Dobbs is a
xlockmore: registered trademark of The Subgenius Foundation, used by permission)
xlockmore:
xlockmore:
xlockmore:

PACKAGE NAME:  xsane-0.998-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  1594 K
PACKAGE SIZE (uncompressed):  5210 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xsane: xsane (Graphical frontend to SANE, Scanner Access Now Easy)
xsane:
xsane: xsane provides a graphical user-interface to control an image
xsane: acquisition device such as a flatbed scanner.  It allows previewing
xsane: and scanning individual images and can be invoked either directly
xsane: from the command-line or through the GIMP image manipulation program.
xsane:
xsane: xsane accesses image acquisition devices through the SANE (Scanner
xsane: Access Now Easy) interface. 
xsane:
xsane:

PACKAGE NAME:  xscreensaver-5.12-x86_64-1.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  3399 K
PACKAGE SIZE (uncompressed):  19420 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xscreensaver: xscreensaver (a screen saver and locker for X)
xscreensaver:
xscreensaver: A modular screen saver and locker for the X Window System.  Highly
xscreensaver: customizable:  allows the use of any program that can draw on the
xscreensaver: root window as a display mode.  More than 100 display modes are
xscreensaver: included in this package.
xscreensaver:
xscreensaver:
xscreensaver:
xscreensaver:
xscreensaver:

PACKAGE NAME:  xulrunner-1.9.2.16-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  9280 K
PACKAGE SIZE (uncompressed):  54590 K
PACKAGE REQUIRED:  atk >= 1.26.0,cairo >= 1.8.6,dbus >= 1.2.12,glib2 >= 2.20.0,gtk+2 >= 2.16.0,hunspell >= 1.2.8,libidl >= 0.8.13,libjpeg >= 8,nspr >= 4.7.3,nss >= 3.12.2.0,pango >= 1.24.0,python >= 2.6.1,sqlite >= 3.6.22,startup-notification >= 0.9,zlib >= 1.2.3
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xulrunner: xulrunner (Mozilla runtime package to XUL+XPCOM bootstraping)
xulrunner:
xulrunner: Mozilla runtime package that can be used to bootstrap XUL+XPCOM
xulrunner: applications. It will provide mechanisms for installing, upgrading,
xulrunner: and uninstalling these applications. XULRunner will also provide
xulrunner: libxul, a solution which allows the embedding of Mozilla technologies
xulrunner: in other projects and products.
xulrunner:
xulrunner: http://wiki.mozilla.org/XUL:Xul_Runner
xulrunner:
xulrunner: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  xvidcore-1.2.2-x86_64-3vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  348 K
PACKAGE SIZE (uncompressed):  1190 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xvidcore: xvidcore (Free reimplementation of the OpenDivX video codec)
xvidcore:
xvidcore: Free reimplementation of the OpenDivX video codec. You can play
xvidcore: OpenDivX and DivX4 videos with it, as well as encode compatible files.
xvidcore:
xvidcore: http://www.xvid.org/
xvidcore:
xvidcore:
xvidcore: Packager: vl70@vector.linux.net on 14-Feb-2011
xvidcore:
xvidcore:

PACKAGE NAME:  zenity-2.30.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xap
PACKAGE SIZE (compressed):  2588 K
PACKAGE SIZE (uncompressed):  4640 K
PACKAGE REQUIRED:  glib2 >= 2.20.0,gtk+2 >= 2.16.0,libglade >= 2.6.4,libgnomecanvas >= 2.26.0,libnotify >= 0.4.5,rarian
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
zenity: zenity (Display dialog boxes from shell scripts)
zenity:
zenity: Zenity lets you display Gtk+ dialog boxes from the command line and
zenity: through shell scripts. It is similar to gdialog, but is intended to
zenity: be saner. It comes from the same family as dialog, Xdialog, and cdialog.
zenity:
zenity: http://directory.fsf.org/zenity.html
zenity:
zenity:
zenity: Packager: vl70@vector.linux.net on 14-Feb-2011
zenity:

PACKAGE NAME:  Terminal-0.4.6-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  976 K
PACKAGE SIZE (uncompressed):  4000 K
PACKAGE REQUIRED:  atk >= 1.32.0,cairo >= 1.10.2,cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,dbus >= 1.4.1,dbus-glib >= 0.88,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,gdk-pixbuf2 >= 2.22.1,glib2 >= 2.28.3,glibc-solibs >= 2.13,gtk+2 >= 2.24.3,libICE >= 1.0.7,libSM >= 1.2.0,libX11 >= 1.4.2,libXau >= 1.0.6,libXcomposite >= 0.4.3,libXcursor >= 1.1.11,libXdamage >= 1.1.3,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 5.0,libXi >= 1.4.1,libXinerama >= 1.1.1,libXrandr >= 1.3.1,libXrender >= 0.9.6,libpng >= 1.4.5,libxcb >= 1.7,ncurses >= 5.8,pango >= 1.28.3,pixman >= 0.20.2,util-linux >= 2.19,vte >= 0.26.2,xfce >= 4.8,zlib >= 1.2.5
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
Terminal: Terminal (Xfce's Terminal Emulator)
Terminal:
Terminal: This is the Terminal emulator application.  Terminal is a lightweight
Terminal: and easy to use terminal emulator for the X windowing system, with
Terminal: some new ideas and features that makes it unique among X terminal
Terminal: emulators.
Terminal:
Terminal: License: GPL
Terminal: Authors: 
Terminal: Website: xfce.org

PACKAGE NAME:  avahi-0.6.28-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  390 K
PACKAGE SIZE (uncompressed):  2110 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
avahi: avahi (Local network service discovery)
avahi:
avahi: Avahi is a system which facilitates service discovery on local
avahi: network -- this means that you can plug your laptop or computer
avahi: into a network and instantly be able to view other people who
avahi: you can chat with, find printers to print to or find files being
avahi: shared.
avahi:
avahi: http://avahi.org
avahi:
avahi: Packager: _PACKAGER on _BUILD_DATE

PACKAGE NAME:  glade3-3.7.3-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  1715 K
PACKAGE SIZE (uncompressed):  9040 K
PACKAGE REQUIRED:  gconf >= 2.26.0,glib2 >= 2.20.0,gtk+2 >= 2.16.0,libglade >= 2.6.4,libgnome >= 2.26.0,libgnomecanvas >= 2.26.0,libgnomeui >= 2.24.1,pango >= 1.24.0,python >= 2.6.1,rarian
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
glade3: glade3 (User Interface Designer for GTK+ and GNOME)
glade3:
glade3: Glade is a RAD tool to enable quick and easy development of user
glade3: interfaces for the GTK+ toolkit and the GNOME desktop environment.
glade3:
glade3: http://glade.gnome.org/
glade3:
glade3:
glade3: Packager: vl70@vector.linux.net on 27-Mar-2011
glade3:
glade3:

PACKAGE NAME:  gnome-disk-utility-2.32.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  1446 K
PACKAGE SIZE (uncompressed):  10030 K
PACKAGE REQUIRED:  dbus >= 1.2.14,dbus-glib >= 0.80,glib2 >= 2.20.2,gnome-keyring >= 2.26.1,gtk+2 >= 2.16.1,libunique >= 1.0.8,libnotify >= 0.4.5,nautilus >= 2.26.2,polkit >= 0.9,polkit-gnome >= 0.9.2,udisks >= 1.0.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnome-disk-utility|-----handy-ruler------------------------------------------------------|
gnome-disk-utility: gnome-disk-utility (Disk management application)
gnome-disk-utility:
gnome-disk-utility: This package contains the Palimpsest disk management application.
gnome-disk-utility: Palimpsest supports partitioning, file system creation, encryption,
gnome-disk-utility: RAID, SMART monitoring, etc.
gnome-disk-utility:
gnome-disk-utility: http://git.gnome.org/cgit/gnome-disk-utility
gnome-disk-utility:
gnome-disk-utility:
gnome-disk-utility: Packager: vl70@vector.linux.net on 27-Mar-2011
gnome-disk-utility:

PACKAGE NAME:  leafpad-0.8.18.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  88 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  gtk+2 >= 2.14.6
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
leafpad|-----handy-ruler------------------------------------------------------|
leafpad: leafpad (GTK+ based simple text editor)
leafpad:
leafpad: Leafpad is a GTK+ based simple text editor. The user interface is
leafpad: similar to Notepad. It aims to be lighter than GEdit and KWrite, and
leafpad: to be as useful as them.
leafpad:
leafpad: http://tarot.freeshell.org/leafpad/
leafpad:
leafpad:
leafpad: Packager: root@vector.linux.net on 26-Feb-2011
leafpad:

PACKAGE NAME:  orage-4.8.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  1308 K
PACKAGE SIZE (uncompressed):  3770 K
PACKAGE REQUIRED:  dbus >= 1.2.24,libnotify >= 0.7.0,libxfce4util >= 4.6.2,libxfcegui4 >= 4.6.4,xfce4-panel >= 4.6.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
orage: orage (Time-managing application for Xfce4)
orage:
orage: Orage provides a calendar which integrates nicely into the Xfce
orage: Desktop Environment. It is highly configurable and supports alerts
orage: based on dates. It warns you with popup or audio alarm. As it is an
orage: application for every day use it launches itself in the background as
orage: a daemon and can be accessed using the Orage Clock plugin for the
orage: panel.
orage: http://www.xfce.org/
orage:
orage: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  thunar-volman-0.6.0-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  98 K
PACKAGE SIZE (uncompressed):  560 K
PACKAGE REQUIRED:  libnotify >= 0.7.1,xfce4-panel >= 4.7.4 | xfce >= 4.7.4,thunar >= 1.1.4 | xfce >= 4.7.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
thunar-volman: thunar-volman (Volume Manager for Thunar)
thunar-volman:
thunar-volman: The Thunar Volume Manager is an extension for the Thunar file manager,
thunar-volman: which enables automatic management of removable drives and media. For
thunar-volman: example, if thunar-volman is installed and configured properly, and
thunar-volman: you plug in your digital camera, it will automatically launch your
thunar-volman: preferred photo application and import the new pictures from the
thunar-volman: camera into your photo collection.
thunar-volman: http://goodies.xfce.org/projects/thunar-plugins/thunar-volman
thunar-volman:
thunar-volman: Packager: vl70@vector.linux.net on 26-Mar-2011

PACKAGE NAME:  udisks-1.0.2-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  173 K
PACKAGE SIZE (uncompressed):  920 K
PACKAGE REQUIRED:  dbus >= 1.2.14,dbus-glib >= 0.80,dosfstools,e2fsprogs,floppy,glib2 >= 2.20.2,libatasmart >= 0.12,lvm2 >= 2.02.62,mdadm >= 2.6.4,ntfsprogs,parted >= 2.2,polkit >= 0.9,sg3_utils >= 1.28,smp_utils >= 0.94,sqlite >= 3.6.14,udev >= 151,util-linux-ng,xfsprogs
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
udisks: udisks (Storage Management Service)
udisks:
udisks: udisks provides a daemon, D-Bus API and command line tools
udisks: for managing disks and storage devices.
udisks:
udisks: http://www.freedesktop.org/wiki/Software/udisks
udisks:
udisks:
udisks: Packager: vl70@vector.linux.net on 26-Mar-2011
udisks:
udisks:

PACKAGE NAME:  upower-0.9.8-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  120 K
PACKAGE SIZE (uncompressed):  840 K
PACKAGE REQUIRED:  dbus-glib >= 0.80,glib2 >= 2.20.0,libimobiledevice >= 1.0.2,libusb1 >= 1.0.8,pm-utils >= 1.2.4,polkit >= 0.96,sqlite >= 3.6.12,udev >= 151
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
upower: upower (Power Management Service)
upower:
upower: upower provides a daemon, API and command line tools for managing
upower: power devices attached to the system.
upower:
upower: http://upower.freedesktop.org
upower:
upower:
upower: Packager: vl70@vector.linux.net on 26-Mar-2011
upower:
upower:

PACKAGE NAME:  xfce-4.8-x86_64-3vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  9212 K
PACKAGE SIZE (uncompressed):  42890 K
PACKAGE REQUIRED:  
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfce: xfce (a fast and lightweight desktop environment for X)
xfce:
xfce: Xfce is a fast and lightweight desktop environment that is both
xfce: visually appealing and easy to use.
xfce:
xfce: For more information, see:  http://www.xfce.org
xfce:
xfce: Xfce was developed by Olivier Fourdan.
xfce:
xfce:
xfce:

PACKAGE NAME:  xfce4-mixer-4.6.1-x86_64-2vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  132 K
PACKAGE SIZE (uncompressed):  750 K
PACKAGE REQUIRED:  alsa-lib >= 1.0.23,gstreamer >= 0.10.30,gst-plugins-base >= 0.10.30,libxfce4util >= 4.6.2,libxfcegui4 >= 4.6.4,xfce4-panel >= 4.6.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfce4-mixer: xfce4-mixer (Volume control plugin for the Xfce 4 panel)
xfce4-mixer:
xfce4-mixer: Volume control plugin for the Xfce 4 panel.
xfce4-mixer:
xfce4-mixer: http://www.xfce.org/
xfce4-mixer:
xfce4-mixer:
xfce4-mixer: Packager: vl70@vector.linux.net on 26-Mar-2011
xfce4-mixer:
xfce4-mixer:
xfce4-mixer:

PACKAGE NAME:  xfce4-notifyd-0.2.1-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  73 K
PACKAGE SIZE (uncompressed):  380 K
PACKAGE REQUIRED:  dbus-glib >= 0.84,libglade >= 2.6.4,libsexy >= 0.1.11,xfce4-panel >= 4.7.4 | xfce >= 4.7.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon)
xfce4-notifyd:
xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon
xfce4-notifyd: for Xfce.  Applications can use xfce4-notifyd to pop up a notification
xfce4-notifyd: bubble by sending messages through D-Bus.
xfce4-notifyd:
xfce4-notifyd: Homepage: http://goodies.xfce.org/projects/applications/xfce4-notifyd
xfce4-notifyd:
xfce4-notifyd:
xfce4-notifyd: Packager: vl70@vector.linux.net on 26-Mar-2011
xfce4-notifyd:

PACKAGE NAME:  xfce4-power-manager-1.0.10-x86_64-1vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  564 K
PACKAGE SIZE (uncompressed):  3570 K
PACKAGE REQUIRED:  libnotify >= 0.4.5,libxfce4ui >= 4.7.2 | xfce >= 4.6.1,polkit >= 0.96,udisks >= 1.0.1,upower >= 0.9.4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
xfce4-power-manager:
xfce4-power-manager: xfce4-power-manager makes power management functions (such as
xfce4-power-manager: suspend and hibernate) easy inside the Xfce Desktop Environment
xfce4-power-manager: (but it should also work in any other desktop environment).
xfce4-power-manager:
xfce4-power-manager: http://goodies.xfce.org/projects/applications/xfce4-power-manager
xfce4-power-manager:
xfce4-power-manager:
xfce4-power-manager: Packager: vl70@vector.linux.net on 26-Mar-2011
xfce4-power-manager:

PACKAGE NAME:  xfce4-screenshooter-1.6.0-x86_64-2vl70.txz
PACKAGE LOCATION:  ./xfce
PACKAGE SIZE (compressed):  421 K
PACKAGE SIZE (uncompressed):  1250 K
PACKAGE REQUIRED:  xfce >= 4.6.0
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xfce4-screenshooter|-----handy-ruler------------------------------------------------------|
xfce4-screenshooter: xfce4-screenshooter-plugin (Screenshot utility for the Xfce desktop)
xfce4-screenshooter:
xfce4-screenshooter: The Xfce Screenshooter utility allows you to capture the entire
xfce4-screenshooter: screen, the active window or a selected region. You can set the delay
xfce4-screenshooter: that elapses before the screenshot is taken and the action that will
xfce4-screenshooter: be done with the screenshot: save it to a PNG file, copy it to the
xfce4-screenshooter: clipboard, or open it using another application.
xfce4-screenshooter:
xfce4-screenshooter: http://goodies.xfce.org/projects/applications/xfce4-screenshooter
xfce4-screenshooter:
xfce4-screenshooter: Packager: vl70@vector.linux.net on 14-Feb-2011