Packages changed:
  conntrack-tools (1.4.5 -> 1.4.6)
  iproute2 (5.5.0 -> 5.6.0)
  kernel-source (5.6.0 -> 5.6.2)
  libnetfilter_conntrack (1.0.7 -> 1.0.8)
  libnftnl (1.1.5 -> 1.1.6)
  pciutils (3.6.2 -> 3.6.4)
  python-distro (1.4.0 -> 1.5.0)
  salt
  yomi-formula (0.0.1+git.1585319502.392f59c -> 0.0.1+git.1585837779.87bbc9c)

=== Details ===

==== conntrack-tools ====
Version update (1.4.5 -> 1.4.6)

- Update to release 1.4.6
  * conntrackd: fix UDP IPv6 destination address not being usable
  * conntrack: Allow protocol number zero
  * conntrackd: cthelper: Add new SLP helper
- Drop conntrackd-Use-strdup-in-lexer.patch,
  conntrackd-use-strncpy-to-unix-path.patch,
  conntrackd-cthelper-Add-new-SLP-helper.patch,
  conntrackd-use-correct-max-unix-path-length.patch (merged)
- Drop require on systemd, since it can run in a namespace without.

==== iproute2 ====
Version update (5.5.0 -> 5.6.0)

- Update to release 5.6
  * ip link: show permanent hardware address
  * ip link: add support for STP xstats
  * ip link: bond: print LACP actor/partner oper states as strings
  * tc: Add support for ETS Qdisc
  * ip: xfrm: add espintcp encapsulation
  * tc: add support for FQ-PIE packet scheduler

==== kernel-source ====
Version update (5.6.0 -> 5.6.2)

- bpf: update jmp32 test cases to fix range bound deduction
  (bnc#1012628).
- serial: sprd: Fix a dereference warning (bnc#1012628).
- vt: selection, introduce vc_is_sel (bnc#1012628).
- vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines
  (bnc#1012628).
- vt: switch vt_dont_switch to bool (bnc#1012628).
- vt: vt_ioctl: remove unnecessary console allocation checks
  (bnc#1012628).
- vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  (bnc#1012628).
- vt: vt_ioctl: fix use-after-free in vt_in_use() (bnc#1012628).
- platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems
  DMI table (bnc#1012628).
- Linux 5.6.2 (bnc#1012628).
- commit 8dfb75b
- Linux 5.6.1 (bnc#1012628).
- media: v4l2-core: fix a use-after-free bug of sd->devnode
  (bnc#1012628).
- media: xirlink_cit: add missing descriptor sanity checks
  (bnc#1012628).
- media: stv06xx: add missing descriptor sanity checks
  (bnc#1012628).
- media: dib0700: fix rc endpoint lookup (bnc#1012628).
- media: ov519: add missing endpoint sanity checks (bnc#1012628).
- libfs: fix infoleak in simple_attr_read() (bnc#1012628).
- ahci: Add Intel Comet Lake H RAID PCI ID (bnc#1012628).
- staging: wfx: annotate nested gc_list vs tx queue locking
  (bnc#1012628).
- staging: wfx: fix init/remove vs IRQ race (bnc#1012628).
- staging: wfx: add proper "compatible" string (bnc#1012628).
- staging: wlan-ng: fix use-after-free Read in
  hfa384x_usbin_callback (bnc#1012628).
- staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
  (bnc#1012628).
- staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
  (bnc#1012628).
- staging: kpc2000: prevent underflow in cpld_reconfigure()
  (bnc#1012628).
- media: usbtv: fix control-message timeouts (bnc#1012628).
- media: flexcop-usb: fix endpoint sanity check (bnc#1012628).
- usb: musb: fix crash with highmen PIO and usbmon (bnc#1012628).
- USB: serial: io_edgeport: fix slab-out-of-bounds read in
  edge_interrupt_callback (bnc#1012628).
- USB: cdc-acm: restore capability check order (bnc#1012628).
- USB: serial: option: add Wistron Neweb D19Q1 (bnc#1012628).
- USB: serial: option: add BroadMobi BM806U (bnc#1012628).
- USB: serial: option: add support for ASKEY WWHC050
  (bnc#1012628).
- bpf: Undo incorrect __reg_bound_offset32 handling (bnc#1012628).
- commit 1675c56
- Refresh
  patches.suse/media-go7007-Fix-URB-type-for-interrupt-handling.patch.
  Update upstream status.
- commit 96043ad
- Refresh
  patches.suse/mac80211-fix-authentication-with-iwlwifi-mvm.patch.
  Update upstream status -- merged.
- commit 26b6c02

==== libnetfilter_conntrack ====
Version update (1.0.7 -> 1.0.8)

- Update to release 1.0.8
  * conntrack: support for IPS_OFFLOAD

==== libnftnl ====
Version update (1.1.5 -> 1.1.6)

- Update to release 1.1.6
  * add slave device matching
  * support for NFTNL_SET_EXPR

==== pciutils ====
Version update (3.6.2 -> 3.6.4)
Subpackages: libpci3

- Update to version 3.6.4:
  * A new back-end for the GNU Hurd was contributed by Joan Lledó.
  * When printing VPD item identifiers, non-ASCII characters are escaped.
- Changes for version 3.6.3
  * `lspci -t' (tree mode) can be combined with `-s' to show a sub-tree.
    We also fixed potential buffer overflows in the tree dumper.
  * Cleaned messy code for dumping of I/O, memory, and ROM regions.
    This helped fixing a bug, which caused some 64-bit regions to be
    reported as virtual. All flags are now printed after the address
    (previously, "[virtual]" and "[enhanced]" were before it for no good
    reason).
  * Added pci_find_cap_nr() to the library, which handles capabilities
    which occur multiple times in a single device.
  * Minor improvements in printing of PCIe capabilities.
  * We now decode the Multicast and Secondary PCI Express extended
    capabilities.
  * The list of capability names available to setpci was updated.
  * Minor bugs were fixed in FreeBSD and Solaris ports.
  * We now prefer HTTPS URLs in all documentation
  * The pci.ids file has a man page.
  * As usually, updated pci.ids to the current snapshot of the database.
- Drop no longer relevant pciutils-3.2.0_update-dist.patch
- Do not ship update-pciids script - they are provided via hwdata
  package and we dont want to override data by other packages

==== python-distro ====
Version update (1.4.0 -> 1.5.0)

- Update to 1.5.0:
  * Backward Compatibility:
    + Keep output as native string so we can compatible with python2 interface
  * Bug Fixes:
    + Fix detection of RHEL 6 ComputeNode [#255]
    + Fix Oracle 4/5 lsb_release id and names [#250]
    + Ignore /etc/plesk-release file while parsing distribution

==== salt ====
Subpackages: python3-salt salt-master salt-minion salt-standalone-formulas-configuration

- Enable building and installation for Fedora
- Disable python2 build on Tumbleweed
  We are removing the python2 interpreter from openSUSE (SLE16).
  As such disable salt building for python2 there.
- Sanitize grains loaded from roster_grains.json cache during "state.pkg"
- Added:
  * fix-load-cached-grain-osrelease_info.patch
- Build: Buildequire pkgconfig(systemd) instead of systemd
- Backport saltutil state module to 2019.2 codebase (bsc#1167556)
- Add new custom SUSE capability for saltutil state module
- Added:
  * backport-saltutil-state-module-to-2019.2-codebase.patch
  * add-new-custom-suse-capability-for-saltutil-state-mo.patch

==== yomi-formula ====
Version update (0.0.1+git.1585319502.392f59c -> 0.0.1+git.1585837779.87bbc9c)

- Update to version 0.0.1+git.1585837779.87bbc9c:
  * salt-minion: transfer also the cached data
- Update to version 0.0.1+git.1585760395.c0ab5b9:
  * network: reformat file.append text
  * network: add systemd link for the NIC (bsc#1168076)